Job Summary Under general supervision, performs semi-skilled to skilled routine daily tasks in the maintenance, repair, and construction of City of Bryan buildings and park facilities. Essential Job Functions Performs maintenance, diagnostic, and repairs on equipment in buildings as needed. Performs carpentry work in the installation/renovation/construction of cabinets, shelves, trim work, desks, furnishings, and other facility equipment as needed. Installs, maintains, and/or repairs flooring, ceilings, sheetrock, doors, windows, and other building structures as needed. Applies finishes, including but not limited to paint and stain, to various surfaces. Installs and repairs locks. Performs maintenance on overhead door hardware and operators. Assists other maintenance technicians as needed; provides instruction, training, and guidance to new and/or less experienced maintenance technicians. Performs all work in accordance with applicable codes, regulations, policies, procedures, and standards of quality and safety. Inspects jobs upon completion and ensures areas are clean; cleans and maintains shop area and equipment. Assists in the maintenance of parks Sets up and tears down materials and equipment for special events. Maintains accurate and complete work records. Adheres to after-hours, weekend, and holiday standby requirements as needed. Performs related duties as required. Responds regularly and promptly to work. Minimum Qualifications High School Diploma or GED . Must possess at least three (3) years of experience in the general construction trade(s) and/or building maintenance. Equivalent combinations of education, experience, certification, and training may be considered. Licenses, Certifications & Special Requirements Texas Class C driver’s license with a good driving record as measured by the City’s evaluation system.
Jun 05, 2024
Full Time
Job Summary Under general supervision, performs semi-skilled to skilled routine daily tasks in the maintenance, repair, and construction of City of Bryan buildings and park facilities. Essential Job Functions Performs maintenance, diagnostic, and repairs on equipment in buildings as needed. Performs carpentry work in the installation/renovation/construction of cabinets, shelves, trim work, desks, furnishings, and other facility equipment as needed. Installs, maintains, and/or repairs flooring, ceilings, sheetrock, doors, windows, and other building structures as needed. Applies finishes, including but not limited to paint and stain, to various surfaces. Installs and repairs locks. Performs maintenance on overhead door hardware and operators. Assists other maintenance technicians as needed; provides instruction, training, and guidance to new and/or less experienced maintenance technicians. Performs all work in accordance with applicable codes, regulations, policies, procedures, and standards of quality and safety. Inspects jobs upon completion and ensures areas are clean; cleans and maintains shop area and equipment. Assists in the maintenance of parks Sets up and tears down materials and equipment for special events. Maintains accurate and complete work records. Adheres to after-hours, weekend, and holiday standby requirements as needed. Performs related duties as required. Responds regularly and promptly to work. Minimum Qualifications High School Diploma or GED . Must possess at least three (3) years of experience in the general construction trade(s) and/or building maintenance. Equivalent combinations of education, experience, certification, and training may be considered. Licenses, Certifications & Special Requirements Texas Class C driver’s license with a good driving record as measured by the City’s evaluation system.
City of Portland, Oregon
Portland, Oregon, United States
The Position The Office of Management and Finance is hiring seven (7) Facilities Maintenance Technicians. Job Appointment: Regular, full-time Work Schedule: Monday - Friday, 7:30 am - 4 pm with occasional on-call work and opportunities for overtime. Work Location: This position reports on-site daily at 3315 NW Yeon. Fieldwork is also required, which includes visiting multiple sites throughout the City as needed. Benefits: Please check our benefit tab for an overview of benefits for this position. Union Representation: This classification is represented by the District Council of Trade Unions (DCTU). To view this labor agreement, please click here . Applicants start at the entry salary rate . If you are a DCTU-represented employee, see the labor agreement for additional information or talk to your union representative. Application Material: Please click APPLY to submit your application via the City of Portland’s online portal. You will need to respond to the supplemental questions and attach a resume. Position Summary The Facilities Maintenance Technician performs preventative maintenance and repair of heating, cooling, ventilation systems, household appliances, and other building equipment such as lights, plumbing, and office furniture. Work requires familiarity with building heating systems to recognize operating conditions that may lead to breakdown or inefficient operation. The work also involves performing minor building maintenance tasks requiring various mechanical skills. The ideal candidate will have a strong commitment to safety and OSHA standards. The eligibility list generated from this recruitment may also be used to fill future vacancies in Fire & Rescue positions. As a Facilities Maintenance Technician for Fire & Rescue, you will perform preventative maintenance and repair of heating, cooling, ventilation systems, household appliances, and other building equipment such as lights, plumbing, and office furniture. Work requires familiarity with building heating systems to recognize operating conditions that may lead to breakdown or inefficient operation. The work also involves performing minor building maintenance tasks requiring various mechanical skills. Basic knowledge of appliance repairs, such as clothes washers, dryers, dishwashers, ovens, cooktops, and refrigerators is required. Ability to input and/or retrieve data from computer programs and applications. As a Facilities Maintenance Technician , you will: Perform preventive maintenance to plumbing, electrical, mechanical systems, and related system components; test systems’ competency and devices and evaluate performance; participate in developing preventative maintenance plans. Repair and replace plumbing, electrical, mechanical systems, and system components, including sensors and related hardware and software. Maintain induction and air handling units; clean and inspect all equipment; maintain and service refrigeration units. Estimate and evaluate project costs; identif y repair and maintenance projects requiring the assistance of contractors or vendors; describe work to be performed, solicit cost estimates, and evaluate cost for projects valued at less than prescribed limits; manage the selected contractor’s or vendor’s work and recommend final payment; assist in the review of new construction or remodel plans to assure compliance with facility maintenance standards. Review new construction or remodel plans to ensure compliance with specification s and standards and monitor the work of vendors. Repair and maintain facilities structures; perform minor repairs to building plumbing, low-voltage, and line voltage electric systems, door hardware, fire, life, and safety protection equipment/systems, sprinkler systems, and irrigation lines; construc t and maintain indoor/outdoor recreational facilities, fans, lights and related; conduct structural inspections for safety. Repair and maintain small, motorized equipment and engines. Respond to emergency calls; monitor and evaluate the need for additional assistance; provide technical assistance and make recommendations; may serve as lead; perform related duties as assigned. About the Bureau: OMF Facility Services is housed in the Division of Asset Management (DAM), a 140-person division within the City of Portland’s Office of Management and Finance. OMF Facility Services manages over 1.5 million square feet of City-owned facility assets valued at approximately $900 million, including the City’s highest-profile civic facilities. The organization provides facility operations and maintenance, capital project development and management, space planning and management, and property management and leasing services for City bureaus. The organization is also responsible for long-range capital and real estate planning. Questions? Amanda Hillebrecht, Senior Recruiter Bureau of Human Resources Amanda.Hillebrecht@portlandoregon.gov To Qualify The following minimum qualifications are required for this position: Knowledge of the methods, practices, and tools used in general facility maintenance including, plumbing, mechanical, and related hardware and software equipment. Knowledge of best safety practices including facility maintenance hazards, safety precautions, and applicable OSHA standards. Ability to work effectively with co-workers in a diverse workforce and respond appropriately to questions/concerns from other employees and the public. Knowledge of maintenance, repair, and replacement of building systems including the operation of chillers, fan systems, and pumps. Experience performing repair and replacement of facilities’ electrical components. Applicants must also possess: Oregon Limited Maintenance Electrical (LME) License or higher. CFC Handler and Refrigerant Recovery Certification within six (6) months of hire. For more information about testing please click here . A current/valid state driver's license. Applicants must meet City "good driver" requirements. Ability to pass an in-depth background investigation. Ability to pass a pre-employment physical examination after an offer of employment has been made and accepted. Although not required, you may have one or more of the following: Certificate of HVAC Completion from a 2-year Trade School or Apprenticeship ORACCA Brazing Certification or equivalent State of Oregon Backflow Tester/Cross Connection Inspector State of Oregon’s Class 3 Boiler License The Recruitment Process STEP 1: Apply online between June 10 , 2024 and August 26, 2024 Required Application Materials: Resume Answer the Supplemental Questions (click on the Questions tab to preview the questions) Optional Application Materials: Veteran documents to request for Veteran Preference (ex, DD214-Member 4, VA Benefit Letter, etc.) Application Tips: The City of Portland has How to Apply Videos and offers How to Apply Classes once per month. If you have questions after watching the videos you are invited to contact the recruiter listed on the announcement. Your responses to the supplemental questions should include details describing your education, training, and/or experience, and where obtained, which clearly reflects your qualifications for each of the numbered items in the "To Qualify" section of this announcement. Your resume should support the details described in your responses to the supplemental questions. Do not attach materials not requested. All completed applications for this position must be submitted no later than the closing date and time of this recruitment. All applications must be submitted via the City's online application process. E-mailed and/or faxed applications will not be accepted. Step 2: Minimum Qualification Evaluation Phase 1: Week of July 1, 2024 (monthly thereafter) An evaluation of each applicant's training and paid and unpaid experience, as demonstrated in their resume and supplemental questions, weighted 100%. Your resume and responses to the supplemental questions will be the basis for our evaluation of your qualifications for this position. Incomplete or inappropriate information may result in disqualification. You have 14 days from the notice of the minimum qualification evaluation results to let us know if you like to review and discuss your evaluation result. Please read the City of Portland Administrative Rule 3.01 for complete information. Additional evaluation may be required before the establishment of the eligible list and/or final selection. Step 3: Minimum Qualification Evaluation Phase 2: Work Skills Demonstration Applicants who successfully pass Minimum Qualification Evaluation Phase 1 of the recruitment process will be scheduled to participate in the work skills demonstration, weighted 100%. The work skills demonstration test will cover the following: Written Test Furnace Part Identification Lighting Board Hands-on Test An invitation will be sent via email. Out-of-town candidates will be required to travel to participate in phase II. Phase II is tentatively scheduled for the Weeks of July 15th, August 19th, and September 9th Candidates who apply by July 1st will be invited to test the week of July 15th. Candidates who apply between July 2nd and August 5th will be invited to test the week of August 19th. Candidates who apply between August 6th and August 26th will be invited to test the week of September 9th. A photo ID will be required for admittance to the test. All Safety protocols must be followed. You have 14 days from the notice of the minimum qualification evaluation phase 2 results to let us know if you would like to review and discuss your evaluation result. Please read the City of Portland Administrative Rule 3.01 for complete information. Additional evaluation may be required before establishing the eligible list and final selection. Step 4: Establishment of Eligible List: Week of July 22, 2024 (monthly thereafter) Candidates who meet the minimum qualifications will be placed on the equally ranked eligible list. Step 5: Selection (Interview): To Be Determined The hiring bureau will review and select candidates to interview. Please note, the selection process may take up to 90 days from the notification of being placed on the eligible list. Step 6: Offer of Employment: To Be Determined Step 7: Start Date: To Be Determined A start date will be determined after all conditions of employment have been met. *Timeline is approximate and subject to change* Additional Information Click here for additional information regarding the following: Veteran Preference ADA, Pregnancy, and Religious Accommodations Work Status Equal Employment Opportunity A Career with the City of Portland offers many Employee Benefits We offer a comprehensive benefits package, including but not limited to Health Care (Medical, Vision and Dental) Carrot Fertility Wellness Benefits Life Insurance Short- and Long-term disability coverage to eligible employees and their families. Employee Assistance Plan Flexible Spending Accounts Retirement Oregon Public Employees Retirement System (PERS), including contributions to the PERS IAP plan paid by employer Family Medical Leave City Paid Parental Leave AND SO MANY MORE! Benefits may vary depending on bargaining unit and employment status. Click here to review the many different benefits the City of Portland offers . Closing Date/Time: 8/26/2024 9:00 AM Pacific
Jun 11, 2024
Full Time
The Position The Office of Management and Finance is hiring seven (7) Facilities Maintenance Technicians. Job Appointment: Regular, full-time Work Schedule: Monday - Friday, 7:30 am - 4 pm with occasional on-call work and opportunities for overtime. Work Location: This position reports on-site daily at 3315 NW Yeon. Fieldwork is also required, which includes visiting multiple sites throughout the City as needed. Benefits: Please check our benefit tab for an overview of benefits for this position. Union Representation: This classification is represented by the District Council of Trade Unions (DCTU). To view this labor agreement, please click here . Applicants start at the entry salary rate . If you are a DCTU-represented employee, see the labor agreement for additional information or talk to your union representative. Application Material: Please click APPLY to submit your application via the City of Portland’s online portal. You will need to respond to the supplemental questions and attach a resume. Position Summary The Facilities Maintenance Technician performs preventative maintenance and repair of heating, cooling, ventilation systems, household appliances, and other building equipment such as lights, plumbing, and office furniture. Work requires familiarity with building heating systems to recognize operating conditions that may lead to breakdown or inefficient operation. The work also involves performing minor building maintenance tasks requiring various mechanical skills. The ideal candidate will have a strong commitment to safety and OSHA standards. The eligibility list generated from this recruitment may also be used to fill future vacancies in Fire & Rescue positions. As a Facilities Maintenance Technician for Fire & Rescue, you will perform preventative maintenance and repair of heating, cooling, ventilation systems, household appliances, and other building equipment such as lights, plumbing, and office furniture. Work requires familiarity with building heating systems to recognize operating conditions that may lead to breakdown or inefficient operation. The work also involves performing minor building maintenance tasks requiring various mechanical skills. Basic knowledge of appliance repairs, such as clothes washers, dryers, dishwashers, ovens, cooktops, and refrigerators is required. Ability to input and/or retrieve data from computer programs and applications. As a Facilities Maintenance Technician , you will: Perform preventive maintenance to plumbing, electrical, mechanical systems, and related system components; test systems’ competency and devices and evaluate performance; participate in developing preventative maintenance plans. Repair and replace plumbing, electrical, mechanical systems, and system components, including sensors and related hardware and software. Maintain induction and air handling units; clean and inspect all equipment; maintain and service refrigeration units. Estimate and evaluate project costs; identif y repair and maintenance projects requiring the assistance of contractors or vendors; describe work to be performed, solicit cost estimates, and evaluate cost for projects valued at less than prescribed limits; manage the selected contractor’s or vendor’s work and recommend final payment; assist in the review of new construction or remodel plans to assure compliance with facility maintenance standards. Review new construction or remodel plans to ensure compliance with specification s and standards and monitor the work of vendors. Repair and maintain facilities structures; perform minor repairs to building plumbing, low-voltage, and line voltage electric systems, door hardware, fire, life, and safety protection equipment/systems, sprinkler systems, and irrigation lines; construc t and maintain indoor/outdoor recreational facilities, fans, lights and related; conduct structural inspections for safety. Repair and maintain small, motorized equipment and engines. Respond to emergency calls; monitor and evaluate the need for additional assistance; provide technical assistance and make recommendations; may serve as lead; perform related duties as assigned. About the Bureau: OMF Facility Services is housed in the Division of Asset Management (DAM), a 140-person division within the City of Portland’s Office of Management and Finance. OMF Facility Services manages over 1.5 million square feet of City-owned facility assets valued at approximately $900 million, including the City’s highest-profile civic facilities. The organization provides facility operations and maintenance, capital project development and management, space planning and management, and property management and leasing services for City bureaus. The organization is also responsible for long-range capital and real estate planning. Questions? Amanda Hillebrecht, Senior Recruiter Bureau of Human Resources Amanda.Hillebrecht@portlandoregon.gov To Qualify The following minimum qualifications are required for this position: Knowledge of the methods, practices, and tools used in general facility maintenance including, plumbing, mechanical, and related hardware and software equipment. Knowledge of best safety practices including facility maintenance hazards, safety precautions, and applicable OSHA standards. Ability to work effectively with co-workers in a diverse workforce and respond appropriately to questions/concerns from other employees and the public. Knowledge of maintenance, repair, and replacement of building systems including the operation of chillers, fan systems, and pumps. Experience performing repair and replacement of facilities’ electrical components. Applicants must also possess: Oregon Limited Maintenance Electrical (LME) License or higher. CFC Handler and Refrigerant Recovery Certification within six (6) months of hire. For more information about testing please click here . A current/valid state driver's license. Applicants must meet City "good driver" requirements. Ability to pass an in-depth background investigation. Ability to pass a pre-employment physical examination after an offer of employment has been made and accepted. Although not required, you may have one or more of the following: Certificate of HVAC Completion from a 2-year Trade School or Apprenticeship ORACCA Brazing Certification or equivalent State of Oregon Backflow Tester/Cross Connection Inspector State of Oregon’s Class 3 Boiler License The Recruitment Process STEP 1: Apply online between June 10 , 2024 and August 26, 2024 Required Application Materials: Resume Answer the Supplemental Questions (click on the Questions tab to preview the questions) Optional Application Materials: Veteran documents to request for Veteran Preference (ex, DD214-Member 4, VA Benefit Letter, etc.) Application Tips: The City of Portland has How to Apply Videos and offers How to Apply Classes once per month. If you have questions after watching the videos you are invited to contact the recruiter listed on the announcement. Your responses to the supplemental questions should include details describing your education, training, and/or experience, and where obtained, which clearly reflects your qualifications for each of the numbered items in the "To Qualify" section of this announcement. Your resume should support the details described in your responses to the supplemental questions. Do not attach materials not requested. All completed applications for this position must be submitted no later than the closing date and time of this recruitment. All applications must be submitted via the City's online application process. E-mailed and/or faxed applications will not be accepted. Step 2: Minimum Qualification Evaluation Phase 1: Week of July 1, 2024 (monthly thereafter) An evaluation of each applicant's training and paid and unpaid experience, as demonstrated in their resume and supplemental questions, weighted 100%. Your resume and responses to the supplemental questions will be the basis for our evaluation of your qualifications for this position. Incomplete or inappropriate information may result in disqualification. You have 14 days from the notice of the minimum qualification evaluation results to let us know if you like to review and discuss your evaluation result. Please read the City of Portland Administrative Rule 3.01 for complete information. Additional evaluation may be required before the establishment of the eligible list and/or final selection. Step 3: Minimum Qualification Evaluation Phase 2: Work Skills Demonstration Applicants who successfully pass Minimum Qualification Evaluation Phase 1 of the recruitment process will be scheduled to participate in the work skills demonstration, weighted 100%. The work skills demonstration test will cover the following: Written Test Furnace Part Identification Lighting Board Hands-on Test An invitation will be sent via email. Out-of-town candidates will be required to travel to participate in phase II. Phase II is tentatively scheduled for the Weeks of July 15th, August 19th, and September 9th Candidates who apply by July 1st will be invited to test the week of July 15th. Candidates who apply between July 2nd and August 5th will be invited to test the week of August 19th. Candidates who apply between August 6th and August 26th will be invited to test the week of September 9th. A photo ID will be required for admittance to the test. All Safety protocols must be followed. You have 14 days from the notice of the minimum qualification evaluation phase 2 results to let us know if you would like to review and discuss your evaluation result. Please read the City of Portland Administrative Rule 3.01 for complete information. Additional evaluation may be required before establishing the eligible list and final selection. Step 4: Establishment of Eligible List: Week of July 22, 2024 (monthly thereafter) Candidates who meet the minimum qualifications will be placed on the equally ranked eligible list. Step 5: Selection (Interview): To Be Determined The hiring bureau will review and select candidates to interview. Please note, the selection process may take up to 90 days from the notification of being placed on the eligible list. Step 6: Offer of Employment: To Be Determined Step 7: Start Date: To Be Determined A start date will be determined after all conditions of employment have been met. *Timeline is approximate and subject to change* Additional Information Click here for additional information regarding the following: Veteran Preference ADA, Pregnancy, and Religious Accommodations Work Status Equal Employment Opportunity A Career with the City of Portland offers many Employee Benefits We offer a comprehensive benefits package, including but not limited to Health Care (Medical, Vision and Dental) Carrot Fertility Wellness Benefits Life Insurance Short- and Long-term disability coverage to eligible employees and their families. Employee Assistance Plan Flexible Spending Accounts Retirement Oregon Public Employees Retirement System (PERS), including contributions to the PERS IAP plan paid by employer Family Medical Leave City Paid Parental Leave AND SO MANY MORE! Benefits may vary depending on bargaining unit and employment status. Click here to review the many different benefits the City of Portland offers . Closing Date/Time: 8/26/2024 9:00 AM Pacific
MASSACHUSETTS TRIAL COURT
Salem, Massachusetts, United States
Title: Maintenance Technician - Salem Pay Grade: Grade 9 Starting Pay: $45,943.50/Yr. Departmental Mission Statement: The Facilities Management and Capital Planning department provides for the management and maintenance of 62 state-owned courthouses, and 42 leased facilities located in ten counties of the Commonwealth. The Department is committed to administering effective property management, facility operations, facility renewal, and the delivery of quality customer service in support of the administration of justice throughout the Commonwealth. Facilities Management & Capital Planning Department: Notes: The hours for this position is 6:00am-2:00pm. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. Position Summary: • This series is responsible for assisting in a range of skilled trades duties for both licensed and unlicensed trades. • Duties focus on the application of complex materials and compounds consistent with general contracting work. • Other duties include providing assistance in repairing, installing, and testing various types of systems and equipment. • A classification above the entry level requires the performance of increasingly more responsible and complex work which requires advanced skill and experience. • Employees are appointed at the entry level and are eligible for reclassification to the higher grade within this series consistent with the requirements in the job description. • The position title reverts to the entry level of this series when there is a vacancy. Supervision Received: Receives moderate supervision from the Facilities Supervisor in performing structured but not always routine work. • Moderate judgment is required . Organizational Levels : Maintenance Technician I - This is the entry level position title within this series. • Employees at this level are expected to perform minor repairs and improvements in a variety of trades under the direction of a building or maintenance supervisor. Maintenance Technician II - This is the second level position title within this series. • Employees at this level are expected begin to develop a trade of expertise utilized by the Court Facilities Bureau and have the ability to work independently in the performance of standard maintenance and repairs. Duties: Maintenance Technician I Duties: The following list of major duties represents a composite list of typical duties performed by individuals in this position. • Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division: • Assists in servicing and replacing minor plumbing fixtures. • Performs minor electrical work not requiring a licensed electrician such as replacing light bulbs and fuses. • Assists in minor carpentry and repair work. • Maintain machinery, equipment, and tools by cleaning, lubricating, greasing, and oiling, to ensure optimum working order. • Applies paint, varnish, and stain to all types of surfaces in order to protect and beautify surfaces using appropriate tools and equipment; and performs related duties as required. Maintenance Technician II Duties: Performs preventive maintenance and makes repairs to heating, ventilating, air conditioning equipment according to instructions such as replacing belts on motors, changing filters, bearings, etc. • Maintains and makes routine repairs to electrically powered equipment and appliances according to instruction from senior technicians and equipment service manual. • Apply carpentry techniques and using carpentry tools to construct, alter, repair, and/or install walls, stairs, floors, ceiling, windows, doors, roofs, gutters, and locks. • Perform structural repair, alterations, or improvement work such as preparing surfaces for plaster or cement work; studding, wiring, and plastering walls. • Install glass in doors and windows; All duties covered under Maintenance Technician I; and performs related duties as required. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas. • Ethics and Values Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. • Mission Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. • Problem Solving Accurately assesses maintenance problems of a routine nature and initiates corrective action. • Continuous Learning Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. • Commitment to Diversity Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. • Customer Service Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. • Collaboration Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Maintenance Technician: • Maintenance Technician I Requirements: A high school diploma and at least one year of general building repair and maintenance; or an equivalent combination of education and experience. • Knowledge in a variety of trade areas common to the field of building maintenance • Knowledge of the use and operation of hand tools, power tools, and equipment • Ability to lift and carry heavy objects. • Ability to climb and work on scaffolds and ladders, Physical stamina, and endurance. • Additional Requirements for Maintenance Technician II: A minimum of two years' experience working at the entry level. • A demonstration of competence and expertise in an area of specialization consistent with licensed and unlicensed trades utilized by the Court Facilities Bureau • The acquisition of a trade or technical license where applicable is preferred. • Ability to give direction and instruction to senior staff. Closing Date/Time: 2024-09-22
Jun 13, 2024
Full Time
Title: Maintenance Technician - Salem Pay Grade: Grade 9 Starting Pay: $45,943.50/Yr. Departmental Mission Statement: The Facilities Management and Capital Planning department provides for the management and maintenance of 62 state-owned courthouses, and 42 leased facilities located in ten counties of the Commonwealth. The Department is committed to administering effective property management, facility operations, facility renewal, and the delivery of quality customer service in support of the administration of justice throughout the Commonwealth. Facilities Management & Capital Planning Department: Notes: The hours for this position is 6:00am-2:00pm. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. Position Summary: • This series is responsible for assisting in a range of skilled trades duties for both licensed and unlicensed trades. • Duties focus on the application of complex materials and compounds consistent with general contracting work. • Other duties include providing assistance in repairing, installing, and testing various types of systems and equipment. • A classification above the entry level requires the performance of increasingly more responsible and complex work which requires advanced skill and experience. • Employees are appointed at the entry level and are eligible for reclassification to the higher grade within this series consistent with the requirements in the job description. • The position title reverts to the entry level of this series when there is a vacancy. Supervision Received: Receives moderate supervision from the Facilities Supervisor in performing structured but not always routine work. • Moderate judgment is required . Organizational Levels : Maintenance Technician I - This is the entry level position title within this series. • Employees at this level are expected to perform minor repairs and improvements in a variety of trades under the direction of a building or maintenance supervisor. Maintenance Technician II - This is the second level position title within this series. • Employees at this level are expected begin to develop a trade of expertise utilized by the Court Facilities Bureau and have the ability to work independently in the performance of standard maintenance and repairs. Duties: Maintenance Technician I Duties: The following list of major duties represents a composite list of typical duties performed by individuals in this position. • Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division: • Assists in servicing and replacing minor plumbing fixtures. • Performs minor electrical work not requiring a licensed electrician such as replacing light bulbs and fuses. • Assists in minor carpentry and repair work. • Maintain machinery, equipment, and tools by cleaning, lubricating, greasing, and oiling, to ensure optimum working order. • Applies paint, varnish, and stain to all types of surfaces in order to protect and beautify surfaces using appropriate tools and equipment; and performs related duties as required. Maintenance Technician II Duties: Performs preventive maintenance and makes repairs to heating, ventilating, air conditioning equipment according to instructions such as replacing belts on motors, changing filters, bearings, etc. • Maintains and makes routine repairs to electrically powered equipment and appliances according to instruction from senior technicians and equipment service manual. • Apply carpentry techniques and using carpentry tools to construct, alter, repair, and/or install walls, stairs, floors, ceiling, windows, doors, roofs, gutters, and locks. • Perform structural repair, alterations, or improvement work such as preparing surfaces for plaster or cement work; studding, wiring, and plastering walls. • Install glass in doors and windows; All duties covered under Maintenance Technician I; and performs related duties as required. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas. • Ethics and Values Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. • Mission Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. • Problem Solving Accurately assesses maintenance problems of a routine nature and initiates corrective action. • Continuous Learning Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. • Commitment to Diversity Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. • Customer Service Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. • Collaboration Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Maintenance Technician: • Maintenance Technician I Requirements: A high school diploma and at least one year of general building repair and maintenance; or an equivalent combination of education and experience. • Knowledge in a variety of trade areas common to the field of building maintenance • Knowledge of the use and operation of hand tools, power tools, and equipment • Ability to lift and carry heavy objects. • Ability to climb and work on scaffolds and ladders, Physical stamina, and endurance. • Additional Requirements for Maintenance Technician II: A minimum of two years' experience working at the entry level. • A demonstration of competence and expertise in an area of specialization consistent with licensed and unlicensed trades utilized by the Court Facilities Bureau • The acquisition of a trade or technical license where applicable is preferred. • Ability to give direction and instruction to senior staff. Closing Date/Time: 2024-09-22
MASSACHUSETTS TRIAL COURT
Salem, Massachusetts, United States
Title: Senior Maintenance Technician - Essex Probate & Family Court Pay Grade: Grade 13 Starting Pay: $ 59,047.98 Departmental Mission Statement: The Facilities Management Department of Trial Court provides for the management and maintenance of 63 state-owned courthouses located in ten counties of the Commonwealth. The Department is committed to administering effective property management, and for ensuring the delivery of quality services necessary for the efficient and reliable operation of all of the facilities which it maintains. FACILITES MANAGEMENT & CAPITAL PLANNING ORGANIZATIONAL PROFILE: Notes: Candidate must be licensed as an Electrician, HVAC or a Plumber. The hours for this position is 6am-2pm. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. This position may have occasional travel. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. Position Summary: This series is responsible for performing the full range of skilled trade position duties for both licensed and unlicensed trades. Typical duties include repairing, installing, and testing various types of systems and equipment. These positions may also frequently include the application of complex materials and compounds consistent with general contracting work. The title above the entry level requires the performance of increasingly more responsible and varied work which requires advanced skill and experience with regard to the various licensed and unlicensed trades. Employees are appointed at the entry level position title and are eligible for reclassification to a higher-level position within this series consistent with the specifications for the higher-level position title. The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Reports to a Facilities Supervisor performing structured but not always routine work; Moderate judgment is required. ORGANIZATIONAL LEVELS: Senior Maintenance Tech I (13) - This is the entry level position within this series. Employees at this level are expected to perform plumbing, electrical, carpentry, HVAC, painting, and other trades and technical work in their area of expertise. Employees are expected to have an established area specialization developed through training and experience and can work independently. Senior Maintenance Tech II (14) - This is the second level within the series. These employees are generally involved in projects of a larger scope and complexity consistent with experience and training. The Senior Maintenance Tech II engages in more complex project assignments and has a higher degree of contact with court officials. Senior Maintenance Tech IIs take lead roles in the completion of projects. Employees are required to work a minimum of three years as a Senior Maintenance Tech I before being eligible to reclassify to the higher level. Senior Maintenance Tech II positions also require the employee to hold a trade or technical license if applicable in their area of specialization prior to applying for reclassification. Supervision Received: Duties: Senior Maintenance Technician Duties: The following list of major duties represents a composite list of typical duties performed by individuals in various areas of specialization. Specific duties performed by an incumbent will vary depending upon the Division, designated assignment, and level of the employee. All positions may perform related duties as required. Carpenter • Maintains buildings and related structures applying carpentry techniques and using carpentry tools to construct, alter, repair and/or install walls, stairs, floors, ceilings, windows, doors, roofs, gutters, locks, air-conditioners, handicapped chair rails and ramps, shelving, etc. Inspect buildings needing carpentry repair or alterations, estimates job duration and the cost and/or quantities of labor and materials needed to complete the job. Interprets and/or draws up sketches, patterns, blueprints, instructions and/or layouts of work to be done. Perform structural repair, alteration, or improvement work such as lowering ceilings and paneling rooms; preparing surfaces for plaster or cement work; studding, wiring, and plastering walls and cracks in floors or around windows; taping joints on sheetrock; and pre-cementing and/or replacing formic tops. Confers with various department heads or managers regarding handling of emergencies, the feasibility of performing repair or alterations and the scheduling of work. Performs related work such as framing pictures; making window and door screens; drilling holes in signs; ordering materials and supplies and cleaning; and sharpening and tempering various tools and equipment. Electrician • Tests, repairs, installs and /or maintains various types of electrical systems and equipment by operating the appropriate equipment and tools to ensure proper maintenance and functioning of necessary equipment. Troubleshoots electrical and related equipment using necessary electrical equipment and by reading schematics, diagrams, and outlines to identify and correct operational problems. Maintain an adequate inventory of equipment and materials. Elevator Repairperson • The following list of major duties represents a composite list of typical duties performed by individuals in this position. Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division. Inspects and tests elevators and related machinery to ensure that they meet legal operating requirements. Review plans and specifications for proposed installations or alterations of elevators and related machinery. Test elevators to ensure the receipt of certificates of inspections. Provide technical assistance by responding orally or in writing to inquiries. Perform periodic inspections in compliance with public safety requirements. Coordinates and schedules inspections with other agencies and contractors maintaining personal logs, compiles statistical data and represents the agency at hearing or meetings. HVAC Technician • Installs, repairs, alters, and maintains existing heating, venting and air conditioning (HVAC) equipment and systems. Troubleshoots HVAC equipment and systems. Run standard tests to determine whether finished work meets specifications. Inspect facility to determine the need for maintenance and repair to HVAC equipment. Establish priorities and make recommendations concerning work activities. Locksmith • Install lock devices in doors, desks, office equipment and other units. Repairs and/or overhauls locking devices such as mortise, rim, key-in-the knob locks, dead bolt, office equipment, padlocks, and emergency exit locks by repairing for replacing worn tumblers, springs, or other parts of locking devices; by making alterations to locking mechanisms and units; and/or by replacing escutcheons and face plates on doors to change the size of existing holes to assure correct Fitchburg District Court. Repairs and/or installs locks containing dual locking capabilities by reworking locking devices designed to work in conjunction with other components and equipment to form a complete security or surveillance system. Changes lock combinations by inserting new or repaired tumblers into locks to increase security. Mason/Plasterer • Lays brick, stone and cement blocks using a variety of hand and power tools such as brick or napping hammer, brick or shill saw, pick, chisel, and hammer to build, alter, repair and /or maintain brick and/or concrete surfaces and structures such as sidewalks, partitions, floors, chimneys, etc. Plasters walls and ceilings. Prepare surfaces for plastering or cement work. Pours concrete in molds or forms to make slabs or blocks. Erects and dismantles scaffolding, riggings, and/or ladders. Reads instructions and interprets blueprints and sketches to determine work to be done. Repairs masonry and walls by patching with cement or plaster. Tape joints on sheetrock Perform related duties such as caulking and waterproofing cracks in walls and floors; coring holes through cement or marble floors; cleaning tools and equipment; laying-out cement or marble floors; cleaning tools and equipment; laying-out drop cloths; studding, wiring, and plastering door and window openings, etc. Order materials and supplies. Repair and maintain power tools to ensure proper operation. Painter • Applies paints, varnish, and/or stains to all types of surfaces (e.g., wood, metal, plaster, etc.) To protect and beautify such surfaces using appropriate utensils and equipment such as paint spraying machines. Prepares surfaces for painting using appropriate tools, equipment, and techniques. Selects the types and color of paints, varnish or stain and mixes, blends, and prepares the same for proper color match. Erects, repairs, maintains, and operates staging, and scaffolding following accepted safety practices to gain access to areas needing painting. Estimates length of time, cost and quantities of materials and manpower needed to complete a job. Operates, cleans, and maintains hand and power tools, air compressors and painting equipment. Confers with supervisors and department heads regarding the scheduling of work, the handling of emergencies and the feasibility of installing painting equipment and materials in the area to ensure that needs of the agency are met expeditiously and at a convenient time. Prepares surfaces for plaster or cement work by taping joints on sheetrock, caulking and waterproofing walls and cracks in floors, etc. by using appropriate tools and equipment. Based on assignment, may operate road-line painting machines and sand blasting equipment. Read and/or interpret blueprints, sketches, instructions, or layouts to understand work to be done. Plumber • Install, repairs, and alters steam plumbing systems. Reads and interprets blueprints, sketches, instructions, or layouts to understand construction work to be done. Schedules installation, maintenance, and/or repair work by conferring with supervisors and other department personnel to determine location of equipment and appropriate time to complete the project. Estimates length of time, cost of materials and manpower needed to develop a project budget. Handle complaints from building occupants regarding assigned work and take appropriate corrective action. Roofer Maintains, repairs, and replaces all types of roofing materials using tools and equipment of the trade. Repairs leaks in metal roof, walls and ceilings by soldering, crimping, riveting, and welding seams in sheet metal and installing flashing and waterproof felt using appropriate hand and power tools to reduce water damage and restore water-tight integrity. Erects, repairs maintain and operates staging and rigging, following accepted safety practices to gain access to make necessary repairs to roofs. Perform any assign maintenance duties by manager or supervisor. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas: Ethics and Values - Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. Mission - Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge - Understands standard facility management methods, codes, and operational best practices. Problem Solving - Accurately assesses maintenance problems of a routine nature and initiates corrective action. Continuous Learning - Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. Commitment to Diversity - Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. Customer Service - Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. Collaboration - Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Senior Maintenance Technician: A high school diploma or equivalent; and the following required experience and abilities in one or more of the following skilled trades or areas of specialization: Carpenter: • Must have at least four years of full-time experience in carpentry, woodworking or cabinet-making work or a combination of two years' experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. • Knowledge of the principles and techniques of carpentry. • Knowledge of the types of building structures. • Knowledge of the types of material used in carpentry. • Knowledge of the types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging, etc. Knowledge and skill in the types and uses of small handheld tools such as hammers, saws, screwdrivers, chisels, drills, etc. • Knowledge and skill in the types and uses of tools used in carpentry bench work. Knowledge and skill in the types and uses of small measurement devices such as power saws, power drills, power hammers, etc. Electrician: • Possession of a current and valid Massachusetts journeyman electrician's license issued by the Board of State Examiners of Electricians. Knowledge of state and local electrical codes. • Knowledge of inspection techniques used in the electrical trade. • Knowledge of safety practices and precautions observed in the electrical trade. • Ability to follow oral and written instructions. Ability to perform arithmetical computations with speed and accuracy. • Ability to climb and work from ladders and scaffolds. Elevator Repairperson: • Possession of a current and valid License as a Maintenance Man and Repairman issued by the Massachusetts Dept. of Public Safety. • Knowledge of the principles of operations of elevators, escalators, and hoisting systems. • Knowledge of the methods followed in the repair and maintenance of elevators and related machinery. • Knowledge of safety practices and procedures followed in connection with maintenance. • Skill in the operation of freight and passenger elevators and related machinery. • Ability to understand and apply the laws, rules, regulations, policies, procedures, specifications, standards, and guidelines governing elevators and related machinery. • Ability to read and interpret such documents as technical and equipment operation manuals, plans, specifications, blueprints, etc. HVAC Technician: • Possession of a current and valid Massachusetts journeyman license in a related field or an equivalent combination of education and experience. • Experience in interpreting blueprints and plans, estimating costs for renovations, maintenance/repair of HVAC systems. Experience in the use and operation of power tools and other equipment. • Knowledge of the laws, rules, and regulations governing HVAC systems. • Knowledge of state building codes. • Ability to follow written and oral instructions. • Ability to perform arithmetical computations with speed and accuracy. Locksmith: • Must have at least four years of full-time experience in locksmithing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. • Knowledge of the methods and techniques used in installing and repair of lock or lock assemblies. • Knowledge of the types and uses of small hand tools and uses of precision measuring equipment. • Skill in the methods and techniques of making and cutting keys. Ability to exercise discretion in handling confidential information. • Ability to maintain accurate records. • Ability to follow written and oral instructions. • Ability to read and interpret such documents as plans, specifications, blueprints, etc. Mason/Plasterer: • Must have at least (2) two years of full-time experience as stonemason, marble setter, bricklayer or plaster, or any combination of the required experience. • A diploma or certificate from a recognized trade or vocational school, may be substituted for a maximum of one year of experience. • Knowledge of standard practices, methods, and techniques of masonry. Knowledge of the types and uses of materials used in masonry such as brick, stone, sand, etc. • Knowledge of the types and uses of equipment used in masonry such as portable mixers, etc. • Knowledge and skill in the types and uses of small hand tools used in masonry such as spades, chisels, trowels, etc. • Knowledge of types of masonry bonds. • Knowledge of types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging. • Skills in the use of masonry equipment such as portable mixers. • Ability to follow written instructions. • Ability to read and interpret documents such as plans, blueprints, drawings, etc. • Ability to climb and work from ladders and scaffolds. Painter: • Must have at least three years of full-time experience in painting work or a combination of two-year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. • Knowledge of the practices and techniques of painting. • Knowledge of the types and uses of painting materials such as paint, varnishes, and stains. Knowledge of the types of finishes used in painting. • Knowledge of the methods of preparation of wood, metal, glass, plaster, cement, and other materials and surfaces for painting. • Knowledge of chemical solvents used to prepare surfaces for painting and cleanup. • Ability to climb and work from ladders and scaffolds. Knowledge and skill in the types and uses of painting tools such as brushes, rollers, spray machine guns, etc. • Knowledge and skill in the types and uses of small handheld tools and power tools such as chisels, drills, power saws, etc. • Knowledge of the properties and characteristics of wood. Knowledge of the practices and techniques of mixing and matching paints. • Knowledge of the types and uses of safety or climbing equipment used in painting such as scaffolds and ladders. • Skill in applying paints and other finishes by brush, cloth, air gun, etc. • Skill in using painting equipment such as hand and power-operated paint chippers, sand blasting equipment, etc. Plumber: • Possession of a current and valid Massachusetts journeyman plumber's license issued by the Board of State Examiners of Plumbers and Gas Fitters. • Knowledge of laws, rules, and regulations governing plumbing. • Ability to follow oral and written instructions. • Ability to lift and carry heavy objects. • Physical stamina and endurance. Ability to maintain accurate records. Roofer: • Must have at least two years of full-time experience in roofing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. • Knowledge of the types and uses of small measurement devices, handheld power tools, and equipment used in roofing. • Knowledge of safety practices and procedures followed in roofing. • Knowledge of the types and uses of materials used in roofing. • Knowledge of the safety practices, methods, and techniques of roofing. • Skill in the use of small measurement devices, handheld power tools, and equipment used in roofing. • Ability to climb and work from ladders and scaffolds. Preferred Qualifications: Closing Date/Time: 2024-09-23
Jun 25, 2024
Full Time
Title: Senior Maintenance Technician - Essex Probate & Family Court Pay Grade: Grade 13 Starting Pay: $ 59,047.98 Departmental Mission Statement: The Facilities Management Department of Trial Court provides for the management and maintenance of 63 state-owned courthouses located in ten counties of the Commonwealth. The Department is committed to administering effective property management, and for ensuring the delivery of quality services necessary for the efficient and reliable operation of all of the facilities which it maintains. FACILITES MANAGEMENT & CAPITAL PLANNING ORGANIZATIONAL PROFILE: Notes: Candidate must be licensed as an Electrician, HVAC or a Plumber. The hours for this position is 6am-2pm. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. This position may have occasional travel. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. Position Summary: This series is responsible for performing the full range of skilled trade position duties for both licensed and unlicensed trades. Typical duties include repairing, installing, and testing various types of systems and equipment. These positions may also frequently include the application of complex materials and compounds consistent with general contracting work. The title above the entry level requires the performance of increasingly more responsible and varied work which requires advanced skill and experience with regard to the various licensed and unlicensed trades. Employees are appointed at the entry level position title and are eligible for reclassification to a higher-level position within this series consistent with the specifications for the higher-level position title. The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Reports to a Facilities Supervisor performing structured but not always routine work; Moderate judgment is required. ORGANIZATIONAL LEVELS: Senior Maintenance Tech I (13) - This is the entry level position within this series. Employees at this level are expected to perform plumbing, electrical, carpentry, HVAC, painting, and other trades and technical work in their area of expertise. Employees are expected to have an established area specialization developed through training and experience and can work independently. Senior Maintenance Tech II (14) - This is the second level within the series. These employees are generally involved in projects of a larger scope and complexity consistent with experience and training. The Senior Maintenance Tech II engages in more complex project assignments and has a higher degree of contact with court officials. Senior Maintenance Tech IIs take lead roles in the completion of projects. Employees are required to work a minimum of three years as a Senior Maintenance Tech I before being eligible to reclassify to the higher level. Senior Maintenance Tech II positions also require the employee to hold a trade or technical license if applicable in their area of specialization prior to applying for reclassification. Supervision Received: Duties: Senior Maintenance Technician Duties: The following list of major duties represents a composite list of typical duties performed by individuals in various areas of specialization. Specific duties performed by an incumbent will vary depending upon the Division, designated assignment, and level of the employee. All positions may perform related duties as required. Carpenter • Maintains buildings and related structures applying carpentry techniques and using carpentry tools to construct, alter, repair and/or install walls, stairs, floors, ceilings, windows, doors, roofs, gutters, locks, air-conditioners, handicapped chair rails and ramps, shelving, etc. Inspect buildings needing carpentry repair or alterations, estimates job duration and the cost and/or quantities of labor and materials needed to complete the job. Interprets and/or draws up sketches, patterns, blueprints, instructions and/or layouts of work to be done. Perform structural repair, alteration, or improvement work such as lowering ceilings and paneling rooms; preparing surfaces for plaster or cement work; studding, wiring, and plastering walls and cracks in floors or around windows; taping joints on sheetrock; and pre-cementing and/or replacing formic tops. Confers with various department heads or managers regarding handling of emergencies, the feasibility of performing repair or alterations and the scheduling of work. Performs related work such as framing pictures; making window and door screens; drilling holes in signs; ordering materials and supplies and cleaning; and sharpening and tempering various tools and equipment. Electrician • Tests, repairs, installs and /or maintains various types of electrical systems and equipment by operating the appropriate equipment and tools to ensure proper maintenance and functioning of necessary equipment. Troubleshoots electrical and related equipment using necessary electrical equipment and by reading schematics, diagrams, and outlines to identify and correct operational problems. Maintain an adequate inventory of equipment and materials. Elevator Repairperson • The following list of major duties represents a composite list of typical duties performed by individuals in this position. Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division. Inspects and tests elevators and related machinery to ensure that they meet legal operating requirements. Review plans and specifications for proposed installations or alterations of elevators and related machinery. Test elevators to ensure the receipt of certificates of inspections. Provide technical assistance by responding orally or in writing to inquiries. Perform periodic inspections in compliance with public safety requirements. Coordinates and schedules inspections with other agencies and contractors maintaining personal logs, compiles statistical data and represents the agency at hearing or meetings. HVAC Technician • Installs, repairs, alters, and maintains existing heating, venting and air conditioning (HVAC) equipment and systems. Troubleshoots HVAC equipment and systems. Run standard tests to determine whether finished work meets specifications. Inspect facility to determine the need for maintenance and repair to HVAC equipment. Establish priorities and make recommendations concerning work activities. Locksmith • Install lock devices in doors, desks, office equipment and other units. Repairs and/or overhauls locking devices such as mortise, rim, key-in-the knob locks, dead bolt, office equipment, padlocks, and emergency exit locks by repairing for replacing worn tumblers, springs, or other parts of locking devices; by making alterations to locking mechanisms and units; and/or by replacing escutcheons and face plates on doors to change the size of existing holes to assure correct Fitchburg District Court. Repairs and/or installs locks containing dual locking capabilities by reworking locking devices designed to work in conjunction with other components and equipment to form a complete security or surveillance system. Changes lock combinations by inserting new or repaired tumblers into locks to increase security. Mason/Plasterer • Lays brick, stone and cement blocks using a variety of hand and power tools such as brick or napping hammer, brick or shill saw, pick, chisel, and hammer to build, alter, repair and /or maintain brick and/or concrete surfaces and structures such as sidewalks, partitions, floors, chimneys, etc. Plasters walls and ceilings. Prepare surfaces for plastering or cement work. Pours concrete in molds or forms to make slabs or blocks. Erects and dismantles scaffolding, riggings, and/or ladders. Reads instructions and interprets blueprints and sketches to determine work to be done. Repairs masonry and walls by patching with cement or plaster. Tape joints on sheetrock Perform related duties such as caulking and waterproofing cracks in walls and floors; coring holes through cement or marble floors; cleaning tools and equipment; laying-out cement or marble floors; cleaning tools and equipment; laying-out drop cloths; studding, wiring, and plastering door and window openings, etc. Order materials and supplies. Repair and maintain power tools to ensure proper operation. Painter • Applies paints, varnish, and/or stains to all types of surfaces (e.g., wood, metal, plaster, etc.) To protect and beautify such surfaces using appropriate utensils and equipment such as paint spraying machines. Prepares surfaces for painting using appropriate tools, equipment, and techniques. Selects the types and color of paints, varnish or stain and mixes, blends, and prepares the same for proper color match. Erects, repairs, maintains, and operates staging, and scaffolding following accepted safety practices to gain access to areas needing painting. Estimates length of time, cost and quantities of materials and manpower needed to complete a job. Operates, cleans, and maintains hand and power tools, air compressors and painting equipment. Confers with supervisors and department heads regarding the scheduling of work, the handling of emergencies and the feasibility of installing painting equipment and materials in the area to ensure that needs of the agency are met expeditiously and at a convenient time. Prepares surfaces for plaster or cement work by taping joints on sheetrock, caulking and waterproofing walls and cracks in floors, etc. by using appropriate tools and equipment. Based on assignment, may operate road-line painting machines and sand blasting equipment. Read and/or interpret blueprints, sketches, instructions, or layouts to understand work to be done. Plumber • Install, repairs, and alters steam plumbing systems. Reads and interprets blueprints, sketches, instructions, or layouts to understand construction work to be done. Schedules installation, maintenance, and/or repair work by conferring with supervisors and other department personnel to determine location of equipment and appropriate time to complete the project. Estimates length of time, cost of materials and manpower needed to develop a project budget. Handle complaints from building occupants regarding assigned work and take appropriate corrective action. Roofer Maintains, repairs, and replaces all types of roofing materials using tools and equipment of the trade. Repairs leaks in metal roof, walls and ceilings by soldering, crimping, riveting, and welding seams in sheet metal and installing flashing and waterproof felt using appropriate hand and power tools to reduce water damage and restore water-tight integrity. Erects, repairs maintain and operates staging and rigging, following accepted safety practices to gain access to make necessary repairs to roofs. Perform any assign maintenance duties by manager or supervisor. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas: Ethics and Values - Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. Mission - Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge - Understands standard facility management methods, codes, and operational best practices. Problem Solving - Accurately assesses maintenance problems of a routine nature and initiates corrective action. Continuous Learning - Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. Commitment to Diversity - Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. Customer Service - Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. Collaboration - Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Senior Maintenance Technician: A high school diploma or equivalent; and the following required experience and abilities in one or more of the following skilled trades or areas of specialization: Carpenter: • Must have at least four years of full-time experience in carpentry, woodworking or cabinet-making work or a combination of two years' experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. • Knowledge of the principles and techniques of carpentry. • Knowledge of the types of building structures. • Knowledge of the types of material used in carpentry. • Knowledge of the types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging, etc. Knowledge and skill in the types and uses of small handheld tools such as hammers, saws, screwdrivers, chisels, drills, etc. • Knowledge and skill in the types and uses of tools used in carpentry bench work. Knowledge and skill in the types and uses of small measurement devices such as power saws, power drills, power hammers, etc. Electrician: • Possession of a current and valid Massachusetts journeyman electrician's license issued by the Board of State Examiners of Electricians. Knowledge of state and local electrical codes. • Knowledge of inspection techniques used in the electrical trade. • Knowledge of safety practices and precautions observed in the electrical trade. • Ability to follow oral and written instructions. Ability to perform arithmetical computations with speed and accuracy. • Ability to climb and work from ladders and scaffolds. Elevator Repairperson: • Possession of a current and valid License as a Maintenance Man and Repairman issued by the Massachusetts Dept. of Public Safety. • Knowledge of the principles of operations of elevators, escalators, and hoisting systems. • Knowledge of the methods followed in the repair and maintenance of elevators and related machinery. • Knowledge of safety practices and procedures followed in connection with maintenance. • Skill in the operation of freight and passenger elevators and related machinery. • Ability to understand and apply the laws, rules, regulations, policies, procedures, specifications, standards, and guidelines governing elevators and related machinery. • Ability to read and interpret such documents as technical and equipment operation manuals, plans, specifications, blueprints, etc. HVAC Technician: • Possession of a current and valid Massachusetts journeyman license in a related field or an equivalent combination of education and experience. • Experience in interpreting blueprints and plans, estimating costs for renovations, maintenance/repair of HVAC systems. Experience in the use and operation of power tools and other equipment. • Knowledge of the laws, rules, and regulations governing HVAC systems. • Knowledge of state building codes. • Ability to follow written and oral instructions. • Ability to perform arithmetical computations with speed and accuracy. Locksmith: • Must have at least four years of full-time experience in locksmithing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. • Knowledge of the methods and techniques used in installing and repair of lock or lock assemblies. • Knowledge of the types and uses of small hand tools and uses of precision measuring equipment. • Skill in the methods and techniques of making and cutting keys. Ability to exercise discretion in handling confidential information. • Ability to maintain accurate records. • Ability to follow written and oral instructions. • Ability to read and interpret such documents as plans, specifications, blueprints, etc. Mason/Plasterer: • Must have at least (2) two years of full-time experience as stonemason, marble setter, bricklayer or plaster, or any combination of the required experience. • A diploma or certificate from a recognized trade or vocational school, may be substituted for a maximum of one year of experience. • Knowledge of standard practices, methods, and techniques of masonry. Knowledge of the types and uses of materials used in masonry such as brick, stone, sand, etc. • Knowledge of the types and uses of equipment used in masonry such as portable mixers, etc. • Knowledge and skill in the types and uses of small hand tools used in masonry such as spades, chisels, trowels, etc. • Knowledge of types of masonry bonds. • Knowledge of types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging. • Skills in the use of masonry equipment such as portable mixers. • Ability to follow written instructions. • Ability to read and interpret documents such as plans, blueprints, drawings, etc. • Ability to climb and work from ladders and scaffolds. Painter: • Must have at least three years of full-time experience in painting work or a combination of two-year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. • Knowledge of the practices and techniques of painting. • Knowledge of the types and uses of painting materials such as paint, varnishes, and stains. Knowledge of the types of finishes used in painting. • Knowledge of the methods of preparation of wood, metal, glass, plaster, cement, and other materials and surfaces for painting. • Knowledge of chemical solvents used to prepare surfaces for painting and cleanup. • Ability to climb and work from ladders and scaffolds. Knowledge and skill in the types and uses of painting tools such as brushes, rollers, spray machine guns, etc. • Knowledge and skill in the types and uses of small handheld tools and power tools such as chisels, drills, power saws, etc. • Knowledge of the properties and characteristics of wood. Knowledge of the practices and techniques of mixing and matching paints. • Knowledge of the types and uses of safety or climbing equipment used in painting such as scaffolds and ladders. • Skill in applying paints and other finishes by brush, cloth, air gun, etc. • Skill in using painting equipment such as hand and power-operated paint chippers, sand blasting equipment, etc. Plumber: • Possession of a current and valid Massachusetts journeyman plumber's license issued by the Board of State Examiners of Plumbers and Gas Fitters. • Knowledge of laws, rules, and regulations governing plumbing. • Ability to follow oral and written instructions. • Ability to lift and carry heavy objects. • Physical stamina and endurance. Ability to maintain accurate records. Roofer: • Must have at least two years of full-time experience in roofing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. • Knowledge of the types and uses of small measurement devices, handheld power tools, and equipment used in roofing. • Knowledge of safety practices and procedures followed in roofing. • Knowledge of the types and uses of materials used in roofing. • Knowledge of the safety practices, methods, and techniques of roofing. • Skill in the use of small measurement devices, handheld power tools, and equipment used in roofing. • Ability to climb and work from ladders and scaffolds. Preferred Qualifications: Closing Date/Time: 2024-09-23
MASSACHUSETTS TRIAL COURT
Salem, Massachusetts, United States
Title: Senior Maintenance Technician- Salem Pay Grade: Grade 13 Starting Pay: $54,593.18/Yr. Departmental Mission Statement: The Facilities Management Department of Trial Court provides for the management and maintenance of 63 state-owned courthouses located in ten counties of the Commonwealth. The Department is committed to administering effective property management, and for ensuring the delivery of quality services necessary for the efficient and reliable operation of all of the facilities which it maintains. FACILITES MANAGEMENT & CAPITAL PLANNING ORGANIZATIONAL PROFILE: Notes: Candidate must be licensed as an Electrician, HVAC or a Plumber. The hours for this position is 6am-2pm. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. This position may have occasional travel. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. Position Summary: This series is responsible for performing the full range of skilled trade position duties for both licensed and unlicensed trades. Typical duties include repairing, installing and testing various types of systems and equipment. These positions may also frequently include the application of complex materials and compounds consistent with general contracting work. The title above the entry level requires the performance of increasingly more responsible and varied work which requires advanced skill and experience with regard to the various licensed and unlicensed trades. Employees are appointed at the entry level position title and are eligible for reclassification to a higher level position within this series consistent with the specifications for the higher level position title. The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Reports to a Facilities Supervisor performing structured but not always routine work; Moderate judgment is required. Senior Maintenance Tech I (13) - This is the entry level position within this series. Employees at this level are expected to perform plumbing, electrical, carpentry, HVAC, painting, and other trades and technical work in their area of expertise. Employees are expected to have an established area specialization developed through training and experience and can work independently. Senior Maintenance Tech II (14) - This is the second level within the series. These employees are generally involved in projects of a larger scope and complexity consistent with experience and training. The Senior Maintenance Tech II engages in more complex project assignments and has a higher degree of contact with court officials. Senior Maintenance Tech IIs take lead roles in the completion of projects. Employees are required to work a minimum of three years as a Senior Maintenance Tech I before being eligible to reclassify to the higher level. Senior Maintenance Tech II positions also require the employee to hold a trade or technical license if applicable in their area of specialization prior to applying for reclassification. Senior Maintenance Technician Duties: The following list of major duties represents a composite list of typical duties performed by individuals in various areas of specialization. Specific duties performed by an incumbent will vary depending upon the Division, designated assignment, and level of the employee. All positions may perform related duties as required. Carpenter Maintains buildings and related structures applying carpentry techniques and using carpentry tools to construct, alter, repair and/or install walls, stairs, floors, ceilings, windows, doors, roofs, gutters, locks, air-conditioners, handicapped chair rails and ramps, shelving, etc. Inspect buildings needing carpentry repair or alterations, estimates job duration and the cost and/or quantities of labor and materials needed to complete the job. Interprets and/or draws up sketches, patterns, blueprints, instructions and/or layouts of work to be done. Perform structural repair, alteration or improvement work such as lowering ceilings and paneling rooms; preparing surfaces for plaster or cement work; studding, wiring and plastering walls and cracks in floors or around windows; taping joints on sheetrock; and pre-cementing and/or replacing formica tops. Confers with various department heads or managers regarding handling of emergencies, the feasibility of performing repair or alterations and the scheduling of work. Performs related work such as framing pictures; making window and door screens; drilling holes in signs; ordering materials and supplies and cleaning; and sharpening and tempering various tools and equipment. Electrician Tests, repairs, installs and /or maintains various types of electrical systems and equipment by operating the appropriate equipment and tools to ensure proper maintenance and functioning of necessary equipment. Troubleshoots electrical and related equipment using necessary electrical equipment and by reading schematics, diagrams and outlines to identify and correct operational problems. Maintain an adequate inventory of equipment and materials. Elevator Repairperson The following list of major duties represents a composite list of typical duties performed by individuals in this position. Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division. Inspects and tests elevators and related machinery to ensure that they meet legal operating requirements. Review plans and specifications for proposed installations or alterations of elevators and related machinery. Test elevators to ensure the receipt of certificates of inspections. Provide technical assistance by responding orally or in writing to inquiries. Perform periodic inspections in compliance with public safety requirements. Coordinates and schedules inspections with other agencies and contractors maintaining personal logs, compiles statistical data and represents the agency at hearing or meetings. HVAC Technician Installs, repairs, alters and maintains existing heating, venting and air conditioning (HVAC) equipment and systems. Troubleshoots HVAC equipment and systems. Run standard tests to determine whether finished work meets specifications. Inspect facility to determine the need for maintenance and repair to HVAC equipment. Establish priorities and make recommendations concerning work activities. Locksmith Install lock devices in doors, desks, office equipment and other units. Repairs and/or overhauls locking devices such as mortise, rim, key-in-the knob locks, dead bolt, office equipment, padlocks and emergency exit locks by repairing for replacing worn tumblers, springs or other parts of locking devices; by making alterations to locking mechanisms and units; and/or by replacing escutcheons and face plates on doors to change the size of existing holes to assure correct Fitchburg District Court. Repairs and/or installs locks containing dual locking capabilities by reworking locking devices designed to work in conjunction with other components and equipment to form a complete security or surveillance system. Changes lock combinations by inserting new or repaired tumblers into locks in order to increase security. Mason/Plasterer Lays brick, stone and cement blocks using a variety of hand and power tools such as brick or napping hammer, brick or shill saw, pick, chisel and hammer to build, alter, repair and /or maintain brick and/or concrete surfaces and structures such as sidewalks, partitions, floors, chimneys, etc. Plasters walls and ceilings. Prepare surfaces for plastering or cement work. Pours concrete in molds or forms to make slabs or blocks .Erects and dismantles scaffolding, riggings, and/or ladders. Reads instructions and interprets blueprints and sketches to determine work to be done. Repairs masonry and walls by patching with cement or plaster. Tape joints on sheetrock Perform related duties such as caulking and waterproofing cracks in walls and floors; coring holes through cement or marble floors; cleaning tools and equipment; laying-out cement or marble floors; cleaning tools and equipment; laying-out drop cloths; studding, wiring, and plastering door and window openings, etc. Order materials and supplies. Repair and maintain power tools to ensure proper operation. Painter Applies paints, varnish, and/or stains to all types of surfaces(e.g. wood, metal, plaster, etc.) In order to protect and beautify such surfaces using appropriate utensils and equipment such as paint spraying machines. Prepares surfaces for painting using appropriate tools, equipment and techniques. Selects the types and color of paints, varnish or stain and mixes, blends and prepares the same for proper color match. Erects, repairs, maintains and operates staging, and scaffolding following accepted safety practices in order to gain access to areas needing painting. Estimates length of time, cost and quantities of materials and manpower needed to complete a job. Operates, cleans and maintains hand and power tools, air compressors and painting equipment. Confers with supervisors and department heads regarding the scheduling of work, the handling of emergencies and the feasibility of installing painting equipment and materials in the area in order to ensure that needs of the agency are met expeditiously and at a convenient time. Prepares surfaces for plaster or cement work by taping joints on sheetrock, caulking and waterproofing walls and cracks in floors, etc. by using appropriate tools and equipment. Performs related duties such as preparing various reports; maintaining records and files; setting up signs and barricades; reading instructions on lay-outs; removing and replacing glass; drilling holes in signs; printing letters and signs; laying out drop cloths; and moving office furniture. Based on assignment, may operate road-line painting machines and sand blasting equipment. Read and/or interpret blueprints, sketches, instructions or layouts to understand work to be done. Plumber Install, repairs, and alters steam plumbing systems. Reads and interprets blueprints, sketches, instructions or layouts to understand construction work to be done. Schedules installation, maintenance, and/or repair work by conferring with supervisors and other department personnel to determine location of equipment and appropriate time to complete the project. Estimates length of time, cost of materials and manpower needed to develop a project budget. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas: Ethics and Values Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. Mission Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. Problem Solving Accurately assesses maintenance problems of a routine nature and initiates corrective action. Continuous Learning Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. Commitment to Diversity Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. Customer Service Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. Collaboration Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Senior Maintenance Technician: A high school diploma or equivalent; and, the following required experience and abilities in one or more of the following skilled trades or areas of specialization: Carpenter: Must have at least four years of full-time experience in carpentry, woodworking or cabinet-making work or a combination of two years' experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the principles and techniques of carpentry. Knowledge of the types of building structures. Knowledge of the types of material used in carpentry. Knowledge of the types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging, etc. Knowledge and skill in the types and uses of small hand held tools such as hammers, saws, screwdrivers, chisels, drills, etc. Knowledge and skill in the types and uses of tools used in carpentry bench work. Knowledge and skill in the types and uses of small measurement devices such as power saws, power drills, power hammers, etc. Electrician: Possession of a current and valid Massachusetts journeyman electrician's license issued by the Board of State Examiners of Electricians. Knowledge of state and local electrical codes. Knowledge of inspection techniques used in the electrical trade. Knowledge of safety practices and precautions observed in the electrical trade. Ability to follow oral and written instructions. Ability to perform arithmetical computations with speed and accuracy. Ability to climb and work from ladders and scaffolds. Elevator Repairperson: Possession of a current and valid License as an Maintenance Man and Repairman issued by the Massachusetts Dept. of Public Safety. Knowledge of the principles of operations of elevators, escalators, and hoisting systems. Knowledge of the methods followed in the repair and maintenance of elevators and related machinery. Knowledge of safety practices and procedures followed in connection with maintenance. Skill in the operation of freight and passenger elevators and related machinery. Ability to understand and apply the laws, rules, regulations, policies, procedures, specifications, standards, and guidelines governing elevators and related machinery. Ability to read and interpret such documents as technical and equipment operation manuals, plans, specifications, blueprints, etc. HVAC Technician: Possession of a current and valid Massachusetts journeyman license in a related field or an equivalent combination of education and experience. Experience in interpreting blueprints and plans, estimating costs for renovations, maintenance/repair of HVAC systems. Experience in the use and operation of power tools and other equipment. Knowledge of the laws, rules, and regulations governing HVAC systems. Knowledge of state building codes. Ability to follow written and oral instructions. Ability to perform arithmetical computations with speed and accuracy. Locksmith: Must have at least four years of full-time experience in locksmithing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the methods and techniques used in installing and repair of lock or lock assemblies. Knowledge of the types and uses of small hand tools and uses of precision measuring equipment. Skill in the methods and techniques of making and cutting keys. Ability to exercise discretion in handling confidential information. Ability to maintain accurate records. Ability to follow written and oral instructions. Ability to read and interpret such documents as plans, specifications, blueprints, etc Mason/Plasterer: Must have at least (2) two years of full-time experience as stonemason, marble setter, bricklayer or plaster, or any combination of the required experience. A diploma or certificate from a recognized trade or vocational school, may be substituted for a maximum of one year of experience. Knowledge of standard practices, methods and techniques of masonry. Knowledge of the types and uses of materials used in masonry such as brick, stone, sand, etc. Knowledge of the types and uses of equipment used in masonry such as portable mixers, etc. Knowledge and skill in the types and uses of small hand tools used in masonry such as spades, chisels, trowels, etc. Knowledge of types of masonry bonds. Knowledge of types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging. Skills in the use of masonry equipment such as portable mixers. Ability to follow written instructions. Ability to read and interpret documents such as plans, blueprints, drawings, etc. Ability to climb and work from ladders and scaffolds. Painter: Must have at least three years of full-time experience in painting work or a combination of two year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the practices and techniques of painting. Knowledge of the types and uses of painting materials such as paint, varnishes, and stains. Knowledge of the types of finishes used in painting. Knowledge of the methods of preparation of wood, metal, glass, plaster, cement, and other materials and surfaces for painting. Knowledge of chemical solvents used to prepare surfaces for painting and cleanup. Ability to climb and work from ladders and scaffolds. Knowledge and skill in the types and uses of painting tools such as brushes, rollers, spray machine guns, etc. Knowledge and skill in the types and uses of small hand held tools and power tools such as chisels, drills, power saws, etc. Knowledge of the properties and characteristics of wood. Knowledge of the practices and techniques of mixing and matching paints. Knowledge of the types and uses of safety or climbing equipment used in painting such as scaffolds and ladders. Skill in applying paints and other finishes by brush, cloth, air gun, etc. Skill in using painting equipment such as hand and power-operated paint chippers, sand blasting equipment, etc. Plumber: Possession of a current and valid Massachusetts journeyman plumber's license issued by the Board of State Examiners of Plumbers and Gas Fitters. Knowledge of laws, rules, and regulations governing plumbing. Ability to follow oral and written instructions. Ability to lift and carry heavy objects. Physical stamina and endurance. Ability to maintain accurate records. Roofer: Must have at least two years of full-time experience in roofing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the types and uses of small measurement devices, hand held power tools, and equipment used in roofing. Knowledge of safety practices and procedures followed in roofing. Knowledge of the types and uses of materials used in roofing. Knowledge of the safety practices, methods and techniques of roofing. Skill in the use of small measurement devices, hand held power tools, and equipment used in roofing. Ability to climb and work from ladders and scaffold Closing Date/Time: 2024-09-22
Jun 25, 2024
Full Time
Title: Senior Maintenance Technician- Salem Pay Grade: Grade 13 Starting Pay: $54,593.18/Yr. Departmental Mission Statement: The Facilities Management Department of Trial Court provides for the management and maintenance of 63 state-owned courthouses located in ten counties of the Commonwealth. The Department is committed to administering effective property management, and for ensuring the delivery of quality services necessary for the efficient and reliable operation of all of the facilities which it maintains. FACILITES MANAGEMENT & CAPITAL PLANNING ORGANIZATIONAL PROFILE: Notes: Candidate must be licensed as an Electrician, HVAC or a Plumber. The hours for this position is 6am-2pm. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. This position may have occasional travel. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. Position Summary: This series is responsible for performing the full range of skilled trade position duties for both licensed and unlicensed trades. Typical duties include repairing, installing and testing various types of systems and equipment. These positions may also frequently include the application of complex materials and compounds consistent with general contracting work. The title above the entry level requires the performance of increasingly more responsible and varied work which requires advanced skill and experience with regard to the various licensed and unlicensed trades. Employees are appointed at the entry level position title and are eligible for reclassification to a higher level position within this series consistent with the specifications for the higher level position title. The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Reports to a Facilities Supervisor performing structured but not always routine work; Moderate judgment is required. Senior Maintenance Tech I (13) - This is the entry level position within this series. Employees at this level are expected to perform plumbing, electrical, carpentry, HVAC, painting, and other trades and technical work in their area of expertise. Employees are expected to have an established area specialization developed through training and experience and can work independently. Senior Maintenance Tech II (14) - This is the second level within the series. These employees are generally involved in projects of a larger scope and complexity consistent with experience and training. The Senior Maintenance Tech II engages in more complex project assignments and has a higher degree of contact with court officials. Senior Maintenance Tech IIs take lead roles in the completion of projects. Employees are required to work a minimum of three years as a Senior Maintenance Tech I before being eligible to reclassify to the higher level. Senior Maintenance Tech II positions also require the employee to hold a trade or technical license if applicable in their area of specialization prior to applying for reclassification. Senior Maintenance Technician Duties: The following list of major duties represents a composite list of typical duties performed by individuals in various areas of specialization. Specific duties performed by an incumbent will vary depending upon the Division, designated assignment, and level of the employee. All positions may perform related duties as required. Carpenter Maintains buildings and related structures applying carpentry techniques and using carpentry tools to construct, alter, repair and/or install walls, stairs, floors, ceilings, windows, doors, roofs, gutters, locks, air-conditioners, handicapped chair rails and ramps, shelving, etc. Inspect buildings needing carpentry repair or alterations, estimates job duration and the cost and/or quantities of labor and materials needed to complete the job. Interprets and/or draws up sketches, patterns, blueprints, instructions and/or layouts of work to be done. Perform structural repair, alteration or improvement work such as lowering ceilings and paneling rooms; preparing surfaces for plaster or cement work; studding, wiring and plastering walls and cracks in floors or around windows; taping joints on sheetrock; and pre-cementing and/or replacing formica tops. Confers with various department heads or managers regarding handling of emergencies, the feasibility of performing repair or alterations and the scheduling of work. Performs related work such as framing pictures; making window and door screens; drilling holes in signs; ordering materials and supplies and cleaning; and sharpening and tempering various tools and equipment. Electrician Tests, repairs, installs and /or maintains various types of electrical systems and equipment by operating the appropriate equipment and tools to ensure proper maintenance and functioning of necessary equipment. Troubleshoots electrical and related equipment using necessary electrical equipment and by reading schematics, diagrams and outlines to identify and correct operational problems. Maintain an adequate inventory of equipment and materials. Elevator Repairperson The following list of major duties represents a composite list of typical duties performed by individuals in this position. Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division. Inspects and tests elevators and related machinery to ensure that they meet legal operating requirements. Review plans and specifications for proposed installations or alterations of elevators and related machinery. Test elevators to ensure the receipt of certificates of inspections. Provide technical assistance by responding orally or in writing to inquiries. Perform periodic inspections in compliance with public safety requirements. Coordinates and schedules inspections with other agencies and contractors maintaining personal logs, compiles statistical data and represents the agency at hearing or meetings. HVAC Technician Installs, repairs, alters and maintains existing heating, venting and air conditioning (HVAC) equipment and systems. Troubleshoots HVAC equipment and systems. Run standard tests to determine whether finished work meets specifications. Inspect facility to determine the need for maintenance and repair to HVAC equipment. Establish priorities and make recommendations concerning work activities. Locksmith Install lock devices in doors, desks, office equipment and other units. Repairs and/or overhauls locking devices such as mortise, rim, key-in-the knob locks, dead bolt, office equipment, padlocks and emergency exit locks by repairing for replacing worn tumblers, springs or other parts of locking devices; by making alterations to locking mechanisms and units; and/or by replacing escutcheons and face plates on doors to change the size of existing holes to assure correct Fitchburg District Court. Repairs and/or installs locks containing dual locking capabilities by reworking locking devices designed to work in conjunction with other components and equipment to form a complete security or surveillance system. Changes lock combinations by inserting new or repaired tumblers into locks in order to increase security. Mason/Plasterer Lays brick, stone and cement blocks using a variety of hand and power tools such as brick or napping hammer, brick or shill saw, pick, chisel and hammer to build, alter, repair and /or maintain brick and/or concrete surfaces and structures such as sidewalks, partitions, floors, chimneys, etc. Plasters walls and ceilings. Prepare surfaces for plastering or cement work. Pours concrete in molds or forms to make slabs or blocks .Erects and dismantles scaffolding, riggings, and/or ladders. Reads instructions and interprets blueprints and sketches to determine work to be done. Repairs masonry and walls by patching with cement or plaster. Tape joints on sheetrock Perform related duties such as caulking and waterproofing cracks in walls and floors; coring holes through cement or marble floors; cleaning tools and equipment; laying-out cement or marble floors; cleaning tools and equipment; laying-out drop cloths; studding, wiring, and plastering door and window openings, etc. Order materials and supplies. Repair and maintain power tools to ensure proper operation. Painter Applies paints, varnish, and/or stains to all types of surfaces(e.g. wood, metal, plaster, etc.) In order to protect and beautify such surfaces using appropriate utensils and equipment such as paint spraying machines. Prepares surfaces for painting using appropriate tools, equipment and techniques. Selects the types and color of paints, varnish or stain and mixes, blends and prepares the same for proper color match. Erects, repairs, maintains and operates staging, and scaffolding following accepted safety practices in order to gain access to areas needing painting. Estimates length of time, cost and quantities of materials and manpower needed to complete a job. Operates, cleans and maintains hand and power tools, air compressors and painting equipment. Confers with supervisors and department heads regarding the scheduling of work, the handling of emergencies and the feasibility of installing painting equipment and materials in the area in order to ensure that needs of the agency are met expeditiously and at a convenient time. Prepares surfaces for plaster or cement work by taping joints on sheetrock, caulking and waterproofing walls and cracks in floors, etc. by using appropriate tools and equipment. Performs related duties such as preparing various reports; maintaining records and files; setting up signs and barricades; reading instructions on lay-outs; removing and replacing glass; drilling holes in signs; printing letters and signs; laying out drop cloths; and moving office furniture. Based on assignment, may operate road-line painting machines and sand blasting equipment. Read and/or interpret blueprints, sketches, instructions or layouts to understand work to be done. Plumber Install, repairs, and alters steam plumbing systems. Reads and interprets blueprints, sketches, instructions or layouts to understand construction work to be done. Schedules installation, maintenance, and/or repair work by conferring with supervisors and other department personnel to determine location of equipment and appropriate time to complete the project. Estimates length of time, cost of materials and manpower needed to develop a project budget. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas: Ethics and Values Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. Mission Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. Problem Solving Accurately assesses maintenance problems of a routine nature and initiates corrective action. Continuous Learning Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. Commitment to Diversity Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. Customer Service Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. Collaboration Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Senior Maintenance Technician: A high school diploma or equivalent; and, the following required experience and abilities in one or more of the following skilled trades or areas of specialization: Carpenter: Must have at least four years of full-time experience in carpentry, woodworking or cabinet-making work or a combination of two years' experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the principles and techniques of carpentry. Knowledge of the types of building structures. Knowledge of the types of material used in carpentry. Knowledge of the types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging, etc. Knowledge and skill in the types and uses of small hand held tools such as hammers, saws, screwdrivers, chisels, drills, etc. Knowledge and skill in the types and uses of tools used in carpentry bench work. Knowledge and skill in the types and uses of small measurement devices such as power saws, power drills, power hammers, etc. Electrician: Possession of a current and valid Massachusetts journeyman electrician's license issued by the Board of State Examiners of Electricians. Knowledge of state and local electrical codes. Knowledge of inspection techniques used in the electrical trade. Knowledge of safety practices and precautions observed in the electrical trade. Ability to follow oral and written instructions. Ability to perform arithmetical computations with speed and accuracy. Ability to climb and work from ladders and scaffolds. Elevator Repairperson: Possession of a current and valid License as an Maintenance Man and Repairman issued by the Massachusetts Dept. of Public Safety. Knowledge of the principles of operations of elevators, escalators, and hoisting systems. Knowledge of the methods followed in the repair and maintenance of elevators and related machinery. Knowledge of safety practices and procedures followed in connection with maintenance. Skill in the operation of freight and passenger elevators and related machinery. Ability to understand and apply the laws, rules, regulations, policies, procedures, specifications, standards, and guidelines governing elevators and related machinery. Ability to read and interpret such documents as technical and equipment operation manuals, plans, specifications, blueprints, etc. HVAC Technician: Possession of a current and valid Massachusetts journeyman license in a related field or an equivalent combination of education and experience. Experience in interpreting blueprints and plans, estimating costs for renovations, maintenance/repair of HVAC systems. Experience in the use and operation of power tools and other equipment. Knowledge of the laws, rules, and regulations governing HVAC systems. Knowledge of state building codes. Ability to follow written and oral instructions. Ability to perform arithmetical computations with speed and accuracy. Locksmith: Must have at least four years of full-time experience in locksmithing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the methods and techniques used in installing and repair of lock or lock assemblies. Knowledge of the types and uses of small hand tools and uses of precision measuring equipment. Skill in the methods and techniques of making and cutting keys. Ability to exercise discretion in handling confidential information. Ability to maintain accurate records. Ability to follow written and oral instructions. Ability to read and interpret such documents as plans, specifications, blueprints, etc Mason/Plasterer: Must have at least (2) two years of full-time experience as stonemason, marble setter, bricklayer or plaster, or any combination of the required experience. A diploma or certificate from a recognized trade or vocational school, may be substituted for a maximum of one year of experience. Knowledge of standard practices, methods and techniques of masonry. Knowledge of the types and uses of materials used in masonry such as brick, stone, sand, etc. Knowledge of the types and uses of equipment used in masonry such as portable mixers, etc. Knowledge and skill in the types and uses of small hand tools used in masonry such as spades, chisels, trowels, etc. Knowledge of types of masonry bonds. Knowledge of types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging. Skills in the use of masonry equipment such as portable mixers. Ability to follow written instructions. Ability to read and interpret documents such as plans, blueprints, drawings, etc. Ability to climb and work from ladders and scaffolds. Painter: Must have at least three years of full-time experience in painting work or a combination of two year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the practices and techniques of painting. Knowledge of the types and uses of painting materials such as paint, varnishes, and stains. Knowledge of the types of finishes used in painting. Knowledge of the methods of preparation of wood, metal, glass, plaster, cement, and other materials and surfaces for painting. Knowledge of chemical solvents used to prepare surfaces for painting and cleanup. Ability to climb and work from ladders and scaffolds. Knowledge and skill in the types and uses of painting tools such as brushes, rollers, spray machine guns, etc. Knowledge and skill in the types and uses of small hand held tools and power tools such as chisels, drills, power saws, etc. Knowledge of the properties and characteristics of wood. Knowledge of the practices and techniques of mixing and matching paints. Knowledge of the types and uses of safety or climbing equipment used in painting such as scaffolds and ladders. Skill in applying paints and other finishes by brush, cloth, air gun, etc. Skill in using painting equipment such as hand and power-operated paint chippers, sand blasting equipment, etc. Plumber: Possession of a current and valid Massachusetts journeyman plumber's license issued by the Board of State Examiners of Plumbers and Gas Fitters. Knowledge of laws, rules, and regulations governing plumbing. Ability to follow oral and written instructions. Ability to lift and carry heavy objects. Physical stamina and endurance. Ability to maintain accurate records. Roofer: Must have at least two years of full-time experience in roofing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the types and uses of small measurement devices, hand held power tools, and equipment used in roofing. Knowledge of safety practices and procedures followed in roofing. Knowledge of the types and uses of materials used in roofing. Knowledge of the safety practices, methods and techniques of roofing. Skill in the use of small measurement devices, hand held power tools, and equipment used in roofing. Ability to climb and work from ladders and scaffold Closing Date/Time: 2024-09-22
HAYWARD AREA RECREATION & PARK DISTRICT
Hayward, California, United States
Job Details Level : Entry Job Location : Hayward Area Recreation District (HARD) - Hayward, CA Position Type : Hourly Education Level : None Salary Range : $18.10 - $24.43 Hourly Travel Percentage : Negligible Job Shift : Day Job Category : Aquatics Do you enjoy supporting the community? Do you have a passion for keeping things functional and in good shape? If so, then we have the job for you! We are in search of a seasonal Pool Maintenance Technician. This position plays a fundamental park of keeping our pools maintained and safe, some of the functions will include; ensuring the aquatics facilities are available for use and consistently maintained in a safe and clean condition, maintaining the aquatics buildings and grounds. This is a seasonal position working 40 hours per week from April to September 2024. Here are the details about the positions: Available Positions: 2 Hourly Rate: $18.10/hour - $24.43/hour Work Schedule: Sunday - Saturday, up to 40 hours/week Work hours: Between the hours of 5:30AM - 9:00PM Part-Time, Seasonal, Hourly, Non-Exempt Position Work Location: Multiple pools within the district Anticipated Start Date: April 2024 Duration: Summer season will run from April 6 th to September 6 th Not to exceed 960 hours per fiscal year. (July 1 - June 30) First review of applications will be February 20 th , 2024. Applications received after first review will be reviewed as we receive them. This posting may close at any time. POSITION SUMMARY Under direction from the Recreation Supervisor or the Aquatics Maintenance and Construction Foreman, performs a variety of semi-skilled tasks for the District’s pool maintenance program; ensures aquatics facilities are available for use and consistently maintained in a safe and clean condition maintains aquatics buildings and grounds; and performs related work as required. DISTINGUISHING CHARACTERISTICS This is the entry-level classification responsible for performing aquatics facility maintenance. Performance requires ability to work independently with initiative and discretion within established guidelines. Receives direction from Recreation Supervisor or the Aquatics Maintenance and Construction Foreman. Work is reviewed upon completion for soundness, appropriateness, and conformity to policy and requirements. ESSENTIAL DUTIES AND RESPONSIBILITIES: Incumbents may not perform all duties. Duties include but are not limited to the following: Performs a variety of semi-skilled tasks for the aquatic maintenance program, requiring proficiency in chemical treatment, and water testing; ensures aquatics facilities are available for use and consistently maintained in a safe and clean condition Ensures that pool systems operate in accordance with mandated requirements. Areas of responsibility include, but are not limited to, chlorination equipment, chemical feed system, storage tanks Maintains records of pool testing results and actions/adjustments taken; documents general maintenance activities Performs landscaping tasks within aquatic facilities and grounds Performs custodial tasks within aquatics facilities and grounds Performs other duties as assigned WORK ENVIRONMENT Employees may work in the field and are occasionally exposed to loud noise levels, cold and/or hot temperatures, vibration, confining workspace, chemicals, mechanical and/or electrical hazards. Incumbents may be exposed to blood and body fluids rendering First Aid and CPR and are required to wear appropriate attire for the recreation activity to which they are assigned. Employees may interact with upset staff and/or public and private representatives in interpreting and enforcing departmental policies and procedures. PHYSICAL DEMANDS Work is primarily performed within a public swimming pool environment and office environment; vision to read printed materials and a computer screen and distinguish colors in wiring; hearing and speech to communicate in person and over the telephone or radio. The job involves fieldwork requiring frequent walking in operational areas to identify or resolve pool maintenance problems or hazards. Finger dexterity is needed to access, enter, and retrieve data using a computer keyboard or calculator and to operate tools and equipment. Incumbents in this classification bend, stoop, kneel, reach, climb and descend ladders, operate hand tools, and inspect pool work sites. Incumbents must possess the ability to lift, carry, push, and pull materials and objects weighing up to 100 pounds or heavier weights with assistance and/or the use of proper equipment. MINIMUM QUALIFICATION REQUIREMENTS Ability and Skill to: Perform a full range of semi-skilled aquatics facility maintenance Provide proper maintenance and inspections of aquatics facilities and equipment as required by regulations Understand, interpret, and apply all relevant laws, rules, regulations, policies, and procedures Safely operate power driven tools and equipment Ensure the safety of patrons, colleagues, and self in the performance of duties Independently organize work, set priorities, meet deadlines, and follow up on assignments Demonstrate strong customer service skills and establish, maintain, and foster positive and effective working relationships Maintain records and files on work performed Use English effectively to communicate in person, over the telephone, and in writing Knowledge of: Methods and techniques used in the operation, repair, and maintenance of swimming pools, equipment, and facilities Operational characteristics of pool equipment, such as pumps, motors, chemical feeders, and related apparatus Principles and practices of pool water testing and proper chemical water treatments Principles and practices of recordkeeping, cleaning and building maintenance Principles and practices for providing high level of customer service Occupational hazards and standard safety practices Modern office practices, methods, and computer equipment and applications English usage, spelling, vocabulary, grammar, and punctuation Education/Experience/Training: California Driver’s License, with a satisfactory driving record Two years of relevant aquatics facility maintenance experience Certified Pool Operator (CPO) or Aquatic Facility Operator (AFO) with 6 months of hire date Any combination of experience, training and/or education that provided the required knowledge, skills and abilities of the class is acceptable Special Requirements: Must be at least 18 years of age If 18 years of age and still in high school, must possess a valid work permit If 18 years of age or older, must pass a fingerprint and/or background clearance prior to employment Completion of the Hepatitis B vaccination series is recommended Completion of Tuberculosis (TB) test required Verification of ID and ability work in the USA
Mar 07, 2024
Part Time
Job Details Level : Entry Job Location : Hayward Area Recreation District (HARD) - Hayward, CA Position Type : Hourly Education Level : None Salary Range : $18.10 - $24.43 Hourly Travel Percentage : Negligible Job Shift : Day Job Category : Aquatics Do you enjoy supporting the community? Do you have a passion for keeping things functional and in good shape? If so, then we have the job for you! We are in search of a seasonal Pool Maintenance Technician. This position plays a fundamental park of keeping our pools maintained and safe, some of the functions will include; ensuring the aquatics facilities are available for use and consistently maintained in a safe and clean condition, maintaining the aquatics buildings and grounds. This is a seasonal position working 40 hours per week from April to September 2024. Here are the details about the positions: Available Positions: 2 Hourly Rate: $18.10/hour - $24.43/hour Work Schedule: Sunday - Saturday, up to 40 hours/week Work hours: Between the hours of 5:30AM - 9:00PM Part-Time, Seasonal, Hourly, Non-Exempt Position Work Location: Multiple pools within the district Anticipated Start Date: April 2024 Duration: Summer season will run from April 6 th to September 6 th Not to exceed 960 hours per fiscal year. (July 1 - June 30) First review of applications will be February 20 th , 2024. Applications received after first review will be reviewed as we receive them. This posting may close at any time. POSITION SUMMARY Under direction from the Recreation Supervisor or the Aquatics Maintenance and Construction Foreman, performs a variety of semi-skilled tasks for the District’s pool maintenance program; ensures aquatics facilities are available for use and consistently maintained in a safe and clean condition maintains aquatics buildings and grounds; and performs related work as required. DISTINGUISHING CHARACTERISTICS This is the entry-level classification responsible for performing aquatics facility maintenance. Performance requires ability to work independently with initiative and discretion within established guidelines. Receives direction from Recreation Supervisor or the Aquatics Maintenance and Construction Foreman. Work is reviewed upon completion for soundness, appropriateness, and conformity to policy and requirements. ESSENTIAL DUTIES AND RESPONSIBILITIES: Incumbents may not perform all duties. Duties include but are not limited to the following: Performs a variety of semi-skilled tasks for the aquatic maintenance program, requiring proficiency in chemical treatment, and water testing; ensures aquatics facilities are available for use and consistently maintained in a safe and clean condition Ensures that pool systems operate in accordance with mandated requirements. Areas of responsibility include, but are not limited to, chlorination equipment, chemical feed system, storage tanks Maintains records of pool testing results and actions/adjustments taken; documents general maintenance activities Performs landscaping tasks within aquatic facilities and grounds Performs custodial tasks within aquatics facilities and grounds Performs other duties as assigned WORK ENVIRONMENT Employees may work in the field and are occasionally exposed to loud noise levels, cold and/or hot temperatures, vibration, confining workspace, chemicals, mechanical and/or electrical hazards. Incumbents may be exposed to blood and body fluids rendering First Aid and CPR and are required to wear appropriate attire for the recreation activity to which they are assigned. Employees may interact with upset staff and/or public and private representatives in interpreting and enforcing departmental policies and procedures. PHYSICAL DEMANDS Work is primarily performed within a public swimming pool environment and office environment; vision to read printed materials and a computer screen and distinguish colors in wiring; hearing and speech to communicate in person and over the telephone or radio. The job involves fieldwork requiring frequent walking in operational areas to identify or resolve pool maintenance problems or hazards. Finger dexterity is needed to access, enter, and retrieve data using a computer keyboard or calculator and to operate tools and equipment. Incumbents in this classification bend, stoop, kneel, reach, climb and descend ladders, operate hand tools, and inspect pool work sites. Incumbents must possess the ability to lift, carry, push, and pull materials and objects weighing up to 100 pounds or heavier weights with assistance and/or the use of proper equipment. MINIMUM QUALIFICATION REQUIREMENTS Ability and Skill to: Perform a full range of semi-skilled aquatics facility maintenance Provide proper maintenance and inspections of aquatics facilities and equipment as required by regulations Understand, interpret, and apply all relevant laws, rules, regulations, policies, and procedures Safely operate power driven tools and equipment Ensure the safety of patrons, colleagues, and self in the performance of duties Independently organize work, set priorities, meet deadlines, and follow up on assignments Demonstrate strong customer service skills and establish, maintain, and foster positive and effective working relationships Maintain records and files on work performed Use English effectively to communicate in person, over the telephone, and in writing Knowledge of: Methods and techniques used in the operation, repair, and maintenance of swimming pools, equipment, and facilities Operational characteristics of pool equipment, such as pumps, motors, chemical feeders, and related apparatus Principles and practices of pool water testing and proper chemical water treatments Principles and practices of recordkeeping, cleaning and building maintenance Principles and practices for providing high level of customer service Occupational hazards and standard safety practices Modern office practices, methods, and computer equipment and applications English usage, spelling, vocabulary, grammar, and punctuation Education/Experience/Training: California Driver’s License, with a satisfactory driving record Two years of relevant aquatics facility maintenance experience Certified Pool Operator (CPO) or Aquatic Facility Operator (AFO) with 6 months of hire date Any combination of experience, training and/or education that provided the required knowledge, skills and abilities of the class is acceptable Special Requirements: Must be at least 18 years of age If 18 years of age and still in high school, must possess a valid work permit If 18 years of age or older, must pass a fingerprint and/or background clearance prior to employment Completion of the Hepatitis B vaccination series is recommended Completion of Tuberculosis (TB) test required Verification of ID and ability work in the USA
City of Costa Mesa, CA
Costa Mesa, California, United States
Description *NEW SALARY UPDATE SALARY NEW Current: $63,324 - $84,864 annually Effective July 2024: $65,220 - $87,408 annually Under direct supervision, to perform skilled and semi-skilled work in the maintenance, repair and minor construction of municipal buildings and related facilities; and perform related duties as required. There is currently one (1) full-time vacancy. CLASS CHARACTERISTICS: An incumbent in this classification performs skilled and semi-skilled maintenance and repair work involving the application of several building trades. Duties include giving guidance and direction to lower level staff. Work is usually performed under minimal supervision in accordance with general or specific instructions. Work is reviewed by a supervisor while in progress and upon completion. APPLICATION AND SELECTION PROCESS: The first application review date has passed and an initial group of applicants are being considered. This recruitment will remain open until filled and may close without prior notice, therefore prompt application is encouraged. Applications must be completed and submitted online. Candidates are requested to provide specific information regarding their education and experience as it relates to the position by completing all fields of the application. Applications may be rejected if incomplete . Do not include "see attached resume" in your responses, as they will not be accepted or reviewed in the application process. Based upon the information presented on the application, a limited number of candidates who possess qualifications most pertinent to the position will be invited to participate in the selection process. The selection process may include, but is not limited to the following components: application review and evaluation, written examination or exercise, physical examination, practical exercise and interview evaluation. Please notify the Human Resources Division 72 hours in advance of the test date if you have a disability which requires accommodation for the testing process. The eligibility list will be in effect for one (1) year, unless exhausted sooner. The eligibility list established from this recruitment may be utilized to fill other lower level vacancies which occur during the life of the list. It is recommended you use a personal email address on your application instead of a work email address. Notifications during this recruitment will be sent by email only (regardless of the notification preference selected during the online application process). Notifications will be sent to the email address that is listed on your online application. All employment offers made by the City are contingent upon establishing proof of a prospective candidate's legal authorization to work in the United States and successfully passing all components of the pre-employment process which may include, but is not limited to: comprehensive background check, criminal history check (livescan fingerprint check), polygraph examination, post-offer psychological evaluation and post-offer medical evaluation (may include drug screen). Based upon current and/or future assignments, an employee may be subject to pre-employment, random, reasonable and post-accident drug and alcohol testing pursuant to the Department of Transportation Regulations. Note: The provisions of this job bulletin do not constitute an expressed or implied contract. Any provisions contained within may be modified or revoked without notice. Essential Functions These functions may not be present in all positions in this class. When a position is to be filled, the essential functions will be noted in the announcement of position availability. Management reserves the right to add, modify, change or rescind work assignments as needed. Performs and assists in building maintenance tasks which may involve carpentry, plumbing, heating, air conditioning, painting and electrical work. Mixes, pours and forms concrete. Makes repairs to existing plumbing systems; tests and locates trouble and replaces defective parts of plumbing systems such as valves, pipelines, faucets and fixtures; cleans out obstructions in pipe systems. Assists in troubleshooting minor electrical problems involving electrical lines, switches and controls; replace or repair as necessary. Repairs and replaces electrical fixtures, switches and related equipment, using a variety of materials, tools, supplies and equipment. Performs or assists in making minor repairs and adjustments of air conditioning and heating units and components. Calibrates thermostats; and operates computer controlled energy management systems. Operates computer for e-mail access, time reporting, word processing, key management systems. Installs and repairs doors, floors, partitions, locks, roofs and ceilings. Prepares surfaces for painting; mixes and matches paint; and applies paint to a variety of building and fixture surfaces. Monitors and oversees facilities related service and repair contracts. Inspects building facilities to identify building maintenance needs. Works with and tracks work orders within the Costa Maintenance Worker Order System. Handles service calls and requests. Responds to emergency requests during and after working hours. Performs other related work as required. MARGINAL FUNCTIONS May act as a lead worker and have supervisory responsibilities in the absence of the assigned supervisor. Qualification Guidelines A typical way to obtain the requisite knowledge and abilities to perform the duties and responsibilities of this classification is as follows: EDUCATION, TRAINING AND/OR EXPERIENCE: Graduation from high school or its equivalent. Additional technical coursework related to the area of assignment is desirable. Two years of experience in building/facility maintenance, repair and minor construction. An equivalent combination of education and relevant experience that provides the requisite knowledge, skills, and abilities to successfully perform essential functions may be considered. License and/or Certificate Possession of, or the ability to obtain a valid California Driver's License, Class C or higher, before the date of appointment. Revocation of license during employment may result in disciplinary action or reassignment. California AB 931 Electrical Certificate or C-10 license is highly desirable. KNOWLEDGE AND SKILL LEVELS: Knowledge of the safe practices, methods, materials, tools and equipment used in facilities maintenance and repair. Knowledge of related building codes pertinent to the repair of buildings, facilities and related equipment. Knowledge of interpreting and following technical instructions and specifications relating to assigned work. REQUISITE ABILITIES: Ability to communicate effectively both orally and in writing. Ability to operate a computer effectively utilizing word processing and spreadsheet software applications. Ability to perform a variety of facilities maintenance and repair work in the electrical, mechanical, carpentry and plumbing trades. Ability to use standard hand and power tools of a variety of building trades skillfully and safely. Ability to follow verbal and written instructions; including safety and environmental requirements; and utilize a wide variety of descriptive information, such as blueprints, sketches, and service manuals. Ability to prepare and maintain reports and records Ability to establish and maintain effective working relationships with co-workers, vendors and the public. Ability to work various shifts as assigned including early morning, day and night hours, overtime, weekend and holidays. Supplemental Information PHYSICAL TASKS AND ENVIRONMENTAL CONDITIONS: Please contact Human Resources for a summary of the essential tasks and environmental factors for this classification. Employee accommodations for physical or mental disabilities will be considered on a case-by-case basis. PUBLIC EMPLOYEE DISASTER SERVICE WORKER: In accordance with Government Code Section 3100 - all City of Costa Mesa employees are required to perform assigned disaster service worker duties in the event of an emergency or disaster. To view benefit information for all groups, Click Here New employees contribute 9% of their salary on a pre-tax basis towards the 2%@60 or 2%@62 CalPERS retirement formula depending on eligibility. Salary Increases: Effective July 2024: 3% increase Employees receive the following health insurance flexible benefits contribution: Current: $1,600monthly Effective January 2025: $1,650monthly The City does not participate in the Social Security system; however, federal mandate requires new employees to contribute 1.45% of wages to Medicare. As a condition of employment, all new employees are required to enroll and participate in the direct deposit program. Closing Date/Time:
Mar 08, 2024
Full Time
Description *NEW SALARY UPDATE SALARY NEW Current: $63,324 - $84,864 annually Effective July 2024: $65,220 - $87,408 annually Under direct supervision, to perform skilled and semi-skilled work in the maintenance, repair and minor construction of municipal buildings and related facilities; and perform related duties as required. There is currently one (1) full-time vacancy. CLASS CHARACTERISTICS: An incumbent in this classification performs skilled and semi-skilled maintenance and repair work involving the application of several building trades. Duties include giving guidance and direction to lower level staff. Work is usually performed under minimal supervision in accordance with general or specific instructions. Work is reviewed by a supervisor while in progress and upon completion. APPLICATION AND SELECTION PROCESS: The first application review date has passed and an initial group of applicants are being considered. This recruitment will remain open until filled and may close without prior notice, therefore prompt application is encouraged. Applications must be completed and submitted online. Candidates are requested to provide specific information regarding their education and experience as it relates to the position by completing all fields of the application. Applications may be rejected if incomplete . Do not include "see attached resume" in your responses, as they will not be accepted or reviewed in the application process. Based upon the information presented on the application, a limited number of candidates who possess qualifications most pertinent to the position will be invited to participate in the selection process. The selection process may include, but is not limited to the following components: application review and evaluation, written examination or exercise, physical examination, practical exercise and interview evaluation. Please notify the Human Resources Division 72 hours in advance of the test date if you have a disability which requires accommodation for the testing process. The eligibility list will be in effect for one (1) year, unless exhausted sooner. The eligibility list established from this recruitment may be utilized to fill other lower level vacancies which occur during the life of the list. It is recommended you use a personal email address on your application instead of a work email address. Notifications during this recruitment will be sent by email only (regardless of the notification preference selected during the online application process). Notifications will be sent to the email address that is listed on your online application. All employment offers made by the City are contingent upon establishing proof of a prospective candidate's legal authorization to work in the United States and successfully passing all components of the pre-employment process which may include, but is not limited to: comprehensive background check, criminal history check (livescan fingerprint check), polygraph examination, post-offer psychological evaluation and post-offer medical evaluation (may include drug screen). Based upon current and/or future assignments, an employee may be subject to pre-employment, random, reasonable and post-accident drug and alcohol testing pursuant to the Department of Transportation Regulations. Note: The provisions of this job bulletin do not constitute an expressed or implied contract. Any provisions contained within may be modified or revoked without notice. Essential Functions These functions may not be present in all positions in this class. When a position is to be filled, the essential functions will be noted in the announcement of position availability. Management reserves the right to add, modify, change or rescind work assignments as needed. Performs and assists in building maintenance tasks which may involve carpentry, plumbing, heating, air conditioning, painting and electrical work. Mixes, pours and forms concrete. Makes repairs to existing plumbing systems; tests and locates trouble and replaces defective parts of plumbing systems such as valves, pipelines, faucets and fixtures; cleans out obstructions in pipe systems. Assists in troubleshooting minor electrical problems involving electrical lines, switches and controls; replace or repair as necessary. Repairs and replaces electrical fixtures, switches and related equipment, using a variety of materials, tools, supplies and equipment. Performs or assists in making minor repairs and adjustments of air conditioning and heating units and components. Calibrates thermostats; and operates computer controlled energy management systems. Operates computer for e-mail access, time reporting, word processing, key management systems. Installs and repairs doors, floors, partitions, locks, roofs and ceilings. Prepares surfaces for painting; mixes and matches paint; and applies paint to a variety of building and fixture surfaces. Monitors and oversees facilities related service and repair contracts. Inspects building facilities to identify building maintenance needs. Works with and tracks work orders within the Costa Maintenance Worker Order System. Handles service calls and requests. Responds to emergency requests during and after working hours. Performs other related work as required. MARGINAL FUNCTIONS May act as a lead worker and have supervisory responsibilities in the absence of the assigned supervisor. Qualification Guidelines A typical way to obtain the requisite knowledge and abilities to perform the duties and responsibilities of this classification is as follows: EDUCATION, TRAINING AND/OR EXPERIENCE: Graduation from high school or its equivalent. Additional technical coursework related to the area of assignment is desirable. Two years of experience in building/facility maintenance, repair and minor construction. An equivalent combination of education and relevant experience that provides the requisite knowledge, skills, and abilities to successfully perform essential functions may be considered. License and/or Certificate Possession of, or the ability to obtain a valid California Driver's License, Class C or higher, before the date of appointment. Revocation of license during employment may result in disciplinary action or reassignment. California AB 931 Electrical Certificate or C-10 license is highly desirable. KNOWLEDGE AND SKILL LEVELS: Knowledge of the safe practices, methods, materials, tools and equipment used in facilities maintenance and repair. Knowledge of related building codes pertinent to the repair of buildings, facilities and related equipment. Knowledge of interpreting and following technical instructions and specifications relating to assigned work. REQUISITE ABILITIES: Ability to communicate effectively both orally and in writing. Ability to operate a computer effectively utilizing word processing and spreadsheet software applications. Ability to perform a variety of facilities maintenance and repair work in the electrical, mechanical, carpentry and plumbing trades. Ability to use standard hand and power tools of a variety of building trades skillfully and safely. Ability to follow verbal and written instructions; including safety and environmental requirements; and utilize a wide variety of descriptive information, such as blueprints, sketches, and service manuals. Ability to prepare and maintain reports and records Ability to establish and maintain effective working relationships with co-workers, vendors and the public. Ability to work various shifts as assigned including early morning, day and night hours, overtime, weekend and holidays. Supplemental Information PHYSICAL TASKS AND ENVIRONMENTAL CONDITIONS: Please contact Human Resources for a summary of the essential tasks and environmental factors for this classification. Employee accommodations for physical or mental disabilities will be considered on a case-by-case basis. PUBLIC EMPLOYEE DISASTER SERVICE WORKER: In accordance with Government Code Section 3100 - all City of Costa Mesa employees are required to perform assigned disaster service worker duties in the event of an emergency or disaster. To view benefit information for all groups, Click Here New employees contribute 9% of their salary on a pre-tax basis towards the 2%@60 or 2%@62 CalPERS retirement formula depending on eligibility. Salary Increases: Effective July 2024: 3% increase Employees receive the following health insurance flexible benefits contribution: Current: $1,600monthly Effective January 2025: $1,650monthly The City does not participate in the Social Security system; however, federal mandate requires new employees to contribute 1.45% of wages to Medicare. As a condition of employment, all new employees are required to enroll and participate in the direct deposit program. Closing Date/Time:
CITY OF SANTA ANA, CA
Santa Ana, California, United States
Description The City of Santa Ana is looking for individuals who are results-oriented, possess great attitude, demonstrate creativity and innovation, work efficiently, show a record of success and have a passion for public service. Having highly talented employees provides the best service to our community. Under general supervision, performs a wide variety of services in the maintenance and repair of City buildings. Note: The current vacancy is designated to the Police Department, however, this position may rotate assignments between City Hall and the Police Department at the discretion of the Division Manager. Applications will be accepted on a continuous basis until a sufficient number of qualified applications have been received. The deadline for the first review of applications is scheduled on Thursday, June 13, 2024 . Applicants are encouraged to submit applications early. Applicants who submit applications after the first review deadline are not guaranteed to be considered for this recruitment. This recruitment may close at any time without notice after the first review deadline. Essential Functions Include But Are Not Limited To Repairs or replaces defective portions of roofs, doors, stucco, windows, furniture, screens, ceramic tiles, water lines, heaters, ventilators, air conditioners, closed water systems, electrical and plumbing fixtures, and humidifiers. Operates direct digital controls and computer controlled energy management system. Maintains and repairs fire, life, and safety systems. Operates a variety of calibration meters. Performs preventative maintenance work on a wide variety of equipment and machinery, including domestic water systems, plumbing, HVAC systems, and door locking devices. Repairs or constructs minor carpentry projects. Changes belts, sheaves, motors, and filters. Refinishes and paints interior and exterior surfaces. Troubleshoots problem areas and determines effective solutions. Operates a wide variety of hand and power tools in accordance with safety practices. Performs other related functions as required. Minimum Qualifications Three (3) years of work experience in the building trades (HVAC, plumbing, electrical, construction, or energy management systems) or any equivalent combination of experience and training which provides the following knowledge and abilities: DESIRABLE KNOWLEDGE, SKILLS, AND ABILITIES Knowledge of: materials, equipment, and methods used in the correct and safe maintenance, repair, and operation of commercial buildings, including but not limited to fire, life, safety systems, centrifugal chillers, boilers, evaporator fans, direct digital controls, cafeteria equipment, and electronic pneumatic lock systems. Ability to: perform skilled maintenance and repairs in the area of work assigned; properly and safely use and maintain common hand tools, small power equipment, and other facility equipment; follow verbal and written instructions; follow all safety environment requirements; maintain professional working relationships with other employees. SPECIAL MINIMUM REQUIREMENTS Must possess and maintain a valid California Class C driver's license. Must be willing and able to work any shift, including weekends and holidays. Must be able to lift 50 pounds. HIGHLY DESIRABLE Formal coursework, training, or certification in commercial HVAC Systems is highly desirable. Familiarity with Trane, JCI, or Siemens automation systems is highly desirable. Selection Process All applicants are required to complete and submit a City application form online and answer the supplemental questionnaire. Resumes or faxed copies will not be accepted in lieu of the City online application. Stating "See Resume" is not an acceptable substitute for a completed application. To apply, click on the "Apply" link located at the top of this page. New users must create an account first. Click on this link for instructions on how to set up your account and apply for the first time: Online Employment Application Guide. Applications will be reviewed by the Human Resources Department. Those applicants possessing the most pertinent qualifications will be invited to continue in the selection process, which will include: Oral Interview Examination (tentatively scheduled for June 19, 2024) : (Weight of 100%) will evaluate the candidate's experience, training, and personal qualifications that are essential for successful performance on the job. Candidates must receive a minimum passing score in order to be placed on the eligible list. NOTE : Prior to appointment, a thorough police background investigation and medical examination will be conducted. A polygraph examination may also be required. The City of Santa Ana is an equal opportunity employer. If you consider yourself a person with a disability, you may contact us regarding providing reasonable accommodation. Please visit the following website to view the summary of comprehensive benefits! Summary of Benefits (under SEIU) NOTE: A more complete set of specifications for this classification may be found on the City's website or on file in the Human Resources Department. The provisions of this bulletin do not constitute an expressed or implied contract. Any provision contained in this bulletin may be modified or revoked without notice. The types and levels of employee benefits provided, including City contribution toward benefit costs, are subject to change as a result of periodic contract settlements between recognized employee associations and the City of Santa Ana. Closing Date/Time: Continuous
Jun 04, 2024
Full Time
Description The City of Santa Ana is looking for individuals who are results-oriented, possess great attitude, demonstrate creativity and innovation, work efficiently, show a record of success and have a passion for public service. Having highly talented employees provides the best service to our community. Under general supervision, performs a wide variety of services in the maintenance and repair of City buildings. Note: The current vacancy is designated to the Police Department, however, this position may rotate assignments between City Hall and the Police Department at the discretion of the Division Manager. Applications will be accepted on a continuous basis until a sufficient number of qualified applications have been received. The deadline for the first review of applications is scheduled on Thursday, June 13, 2024 . Applicants are encouraged to submit applications early. Applicants who submit applications after the first review deadline are not guaranteed to be considered for this recruitment. This recruitment may close at any time without notice after the first review deadline. Essential Functions Include But Are Not Limited To Repairs or replaces defective portions of roofs, doors, stucco, windows, furniture, screens, ceramic tiles, water lines, heaters, ventilators, air conditioners, closed water systems, electrical and plumbing fixtures, and humidifiers. Operates direct digital controls and computer controlled energy management system. Maintains and repairs fire, life, and safety systems. Operates a variety of calibration meters. Performs preventative maintenance work on a wide variety of equipment and machinery, including domestic water systems, plumbing, HVAC systems, and door locking devices. Repairs or constructs minor carpentry projects. Changes belts, sheaves, motors, and filters. Refinishes and paints interior and exterior surfaces. Troubleshoots problem areas and determines effective solutions. Operates a wide variety of hand and power tools in accordance with safety practices. Performs other related functions as required. Minimum Qualifications Three (3) years of work experience in the building trades (HVAC, plumbing, electrical, construction, or energy management systems) or any equivalent combination of experience and training which provides the following knowledge and abilities: DESIRABLE KNOWLEDGE, SKILLS, AND ABILITIES Knowledge of: materials, equipment, and methods used in the correct and safe maintenance, repair, and operation of commercial buildings, including but not limited to fire, life, safety systems, centrifugal chillers, boilers, evaporator fans, direct digital controls, cafeteria equipment, and electronic pneumatic lock systems. Ability to: perform skilled maintenance and repairs in the area of work assigned; properly and safely use and maintain common hand tools, small power equipment, and other facility equipment; follow verbal and written instructions; follow all safety environment requirements; maintain professional working relationships with other employees. SPECIAL MINIMUM REQUIREMENTS Must possess and maintain a valid California Class C driver's license. Must be willing and able to work any shift, including weekends and holidays. Must be able to lift 50 pounds. HIGHLY DESIRABLE Formal coursework, training, or certification in commercial HVAC Systems is highly desirable. Familiarity with Trane, JCI, or Siemens automation systems is highly desirable. Selection Process All applicants are required to complete and submit a City application form online and answer the supplemental questionnaire. Resumes or faxed copies will not be accepted in lieu of the City online application. Stating "See Resume" is not an acceptable substitute for a completed application. To apply, click on the "Apply" link located at the top of this page. New users must create an account first. Click on this link for instructions on how to set up your account and apply for the first time: Online Employment Application Guide. Applications will be reviewed by the Human Resources Department. Those applicants possessing the most pertinent qualifications will be invited to continue in the selection process, which will include: Oral Interview Examination (tentatively scheduled for June 19, 2024) : (Weight of 100%) will evaluate the candidate's experience, training, and personal qualifications that are essential for successful performance on the job. Candidates must receive a minimum passing score in order to be placed on the eligible list. NOTE : Prior to appointment, a thorough police background investigation and medical examination will be conducted. A polygraph examination may also be required. The City of Santa Ana is an equal opportunity employer. If you consider yourself a person with a disability, you may contact us regarding providing reasonable accommodation. Please visit the following website to view the summary of comprehensive benefits! Summary of Benefits (under SEIU) NOTE: A more complete set of specifications for this classification may be found on the City's website or on file in the Human Resources Department. The provisions of this bulletin do not constitute an expressed or implied contract. Any provision contained in this bulletin may be modified or revoked without notice. The types and levels of employee benefits provided, including City contribution toward benefit costs, are subject to change as a result of periodic contract settlements between recognized employee associations and the City of Santa Ana. Closing Date/Time: Continuous
MASSACHUSETTS TRIAL COURT
Boston, Massachusetts, United States
Title: Maintenance Tech-Boston Pay Grade: 9 Starting Pay: $45,943.50/Yr. Departmental Mission Statement: The Facilities Management and Capital Planning department provides for the management and maintenance of 62 state-owned courthouses, and 42 leased facilities located in ten counties of the Commonwealth. The Department is committed to administering effective property management, facility operations, facility renewal, and the delivery of quality customer service in support of the administration of justice throughout the Commonwealth. FACILITES MANAGEMENT & CAPITAL PLANNING ORGANIZATIONAL PROFILE: Notes: The hours for this position is 6am-2pm. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. This posting will remain open until filled;however, preference will be given to candidates that applied during the initial 14 day posting period. Position Summary • This series is responsible for assisting in a range of skilled trades duties for both licensed and unlicensed trades. • Duties focus on the application of complex materials and compounds consistent with general contracting work. • Other duties include providing assistance in repairing, installing, and testing various types of systems and equipment. • A classification above the entry level requires the performance of increasingly more responsible and complex work which requires advanced skill and experience. • Employees are appointed at the entry level and are eligible for reclassification to the higher grade within this series consistent with the requirements in the job description. • The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Receives moderate supervision from the Facilities Supervisor in performing structured but not always routine work. • Moderate judgment is required. ORGANIZATIONAL LEVELS: Maintenance Technician I - This is the entry level position title within this series. • Employees at this level are expected to perform minor repairs and improvements in a variety of trades under the direction of a building or maintenance supervisor. • Maintenance Technician II - This is the second level position title within this series. • Employees at this level are expected begin to develop a trade of expertise utilized by the Court Facilities Bureau and have the ability to work independently in the performance of standard maintenance and repairs. Maintenance Technician I Duties : The following list of major duties represents a composite list of typical duties performed by individuals in this position. • Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division: • Assists in servicing and replacing minor plumbing fixtures. • Performs minor electrical work not requiring a licensed electrician such as replacing light bulbs and fuses. • Assists in minor carpentry and repair work. • Maintain machinery, equipment, and tools by cleaning, lubricating, greasing, and oiling, to ensure optimum working order. • Applies paint, varnish, and stain to all types of surfaces in order to protect and beautify surfaces using appropriate tools and equipment; and performs related duties as required. • Maintenance Technician II Duties: Performs preventive maintenance and makes repairs to heating, ventilating, air conditioning equipment according to instructions such as replacing belts on motors, changing filters, bearings, etc. • Maintains and makes routine repairs to electrically powered equipment and appliances according to instruction from senior technicians and equipment service manual. • Apply carpentry techniques and using carpentry tools to construct, alter, repair, and/or install walls, stairs, floors, ceiling, windows, doors, roofs, gutters, and locks. • Perform structural repair, alterations, or improvement work such as preparing surfaces for plaster or cement work; studding, wiring, and plastering walls. • Install glass in doors and windows; All duties covered under Maintenance Technician I; and performs related duties as required. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas. • Ethics and Values: Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. • Mission: Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. • Problem Solving: Accurately assesses maintenance problems of a routine nature and initiates corrective action. • Continuous Learning: Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. • Commitment to Diversity: Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. • Customer Service: Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. • Collaboration: Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Maintenance Technician: • Maintenance Technician I Requirements: A high school diploma and at least one year of general building repair and maintenance; or an equivalent combination of education and experience. • Knowledge in a variety of trade areas common to the field of building maintenance • Knowledge of the use and operation of hand tools, power tools, and equipment • Ability to lift and carry heavy objects. • Ability to climb and work on scaffolds and ladders, Physical stamina, and endurance. • Additional Requirements for Maintenance Technician II: A minimum of two years' experience working at the entry level. • A demonstration of competence and expertise in an area of specialization consistent with licensed and unlicensed trades utilized by the Court Facilities Bureau • The acquisition of a trade or technical license where applicable is preferred. • Ability to give direction and instruction to senior staff. Closing Date/Time: 2024-09-22
Jun 20, 2024
Full Time
Title: Maintenance Tech-Boston Pay Grade: 9 Starting Pay: $45,943.50/Yr. Departmental Mission Statement: The Facilities Management and Capital Planning department provides for the management and maintenance of 62 state-owned courthouses, and 42 leased facilities located in ten counties of the Commonwealth. The Department is committed to administering effective property management, facility operations, facility renewal, and the delivery of quality customer service in support of the administration of justice throughout the Commonwealth. FACILITES MANAGEMENT & CAPITAL PLANNING ORGANIZATIONAL PROFILE: Notes: The hours for this position is 6am-2pm. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. This posting will remain open until filled;however, preference will be given to candidates that applied during the initial 14 day posting period. Position Summary • This series is responsible for assisting in a range of skilled trades duties for both licensed and unlicensed trades. • Duties focus on the application of complex materials and compounds consistent with general contracting work. • Other duties include providing assistance in repairing, installing, and testing various types of systems and equipment. • A classification above the entry level requires the performance of increasingly more responsible and complex work which requires advanced skill and experience. • Employees are appointed at the entry level and are eligible for reclassification to the higher grade within this series consistent with the requirements in the job description. • The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Receives moderate supervision from the Facilities Supervisor in performing structured but not always routine work. • Moderate judgment is required. ORGANIZATIONAL LEVELS: Maintenance Technician I - This is the entry level position title within this series. • Employees at this level are expected to perform minor repairs and improvements in a variety of trades under the direction of a building or maintenance supervisor. • Maintenance Technician II - This is the second level position title within this series. • Employees at this level are expected begin to develop a trade of expertise utilized by the Court Facilities Bureau and have the ability to work independently in the performance of standard maintenance and repairs. Maintenance Technician I Duties : The following list of major duties represents a composite list of typical duties performed by individuals in this position. • Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division: • Assists in servicing and replacing minor plumbing fixtures. • Performs minor electrical work not requiring a licensed electrician such as replacing light bulbs and fuses. • Assists in minor carpentry and repair work. • Maintain machinery, equipment, and tools by cleaning, lubricating, greasing, and oiling, to ensure optimum working order. • Applies paint, varnish, and stain to all types of surfaces in order to protect and beautify surfaces using appropriate tools and equipment; and performs related duties as required. • Maintenance Technician II Duties: Performs preventive maintenance and makes repairs to heating, ventilating, air conditioning equipment according to instructions such as replacing belts on motors, changing filters, bearings, etc. • Maintains and makes routine repairs to electrically powered equipment and appliances according to instruction from senior technicians and equipment service manual. • Apply carpentry techniques and using carpentry tools to construct, alter, repair, and/or install walls, stairs, floors, ceiling, windows, doors, roofs, gutters, and locks. • Perform structural repair, alterations, or improvement work such as preparing surfaces for plaster or cement work; studding, wiring, and plastering walls. • Install glass in doors and windows; All duties covered under Maintenance Technician I; and performs related duties as required. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas. • Ethics and Values: Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. • Mission: Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. • Problem Solving: Accurately assesses maintenance problems of a routine nature and initiates corrective action. • Continuous Learning: Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. • Commitment to Diversity: Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. • Customer Service: Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. • Collaboration: Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Maintenance Technician: • Maintenance Technician I Requirements: A high school diploma and at least one year of general building repair and maintenance; or an equivalent combination of education and experience. • Knowledge in a variety of trade areas common to the field of building maintenance • Knowledge of the use and operation of hand tools, power tools, and equipment • Ability to lift and carry heavy objects. • Ability to climb and work on scaffolds and ladders, Physical stamina, and endurance. • Additional Requirements for Maintenance Technician II: A minimum of two years' experience working at the entry level. • A demonstration of competence and expertise in an area of specialization consistent with licensed and unlicensed trades utilized by the Court Facilities Bureau • The acquisition of a trade or technical license where applicable is preferred. • Ability to give direction and instruction to senior staff. Closing Date/Time: 2024-09-22
MASSACHUSETTS TRIAL COURT
Boston, Massachusetts, United States
Title: Maintenance Tech-Boston Pay Grade: 9 Starting Pay: $45,943.50/Yr. Departmental Mission Statement: The Facilities Management and Capital Planning department provides for the management and maintenance of 62 state-owned courthouses, and 42 leased facilities located in ten counties of the Commonwealth. The Department is committed to administering effective property management, facility operations, facility renewal, and the delivery of quality customer service in support of the administration of justice throughout the Commonwealth. FACILITES MANAGEMENT & CAPITAL PLANNING ORGANIZATIONAL PROFILE: Notes: The hours for this position is 6am-2pm. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. This posting will remain open until filled;however, preference will be given to candidates that applied during the initial 14 day posting period. Position Summary • This series is responsible for assisting in a range of skilled trades duties for both licensed and unlicensed trades. • Duties focus on the application of complex materials and compounds consistent with general contracting work. • Other duties include providing assistance in repairing, installing, and testing various types of systems and equipment. • A classification above the entry level requires the performance of increasingly more responsible and complex work which requires advanced skill and experience. • Employees are appointed at the entry level and are eligible for reclassification to the higher grade within this series consistent with the requirements in the job description. • The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Receives moderate supervision from the Facilities Supervisor in performing structured but not always routine work. • Moderate judgment is required. ORGANIZATIONAL LEVELS: Maintenance Technician I - This is the entry level position title within this series. • Employees at this level are expected to perform minor repairs and improvements in a variety of trades under the direction of a building or maintenance supervisor. • Maintenance Technician II - This is the second level position title within this series. • Employees at this level are expected begin to develop a trade of expertise utilized by the Court Facilities Bureau and have the ability to work independently in the performance of standard maintenance and repairs. Maintenance Technician I Duties : The following list of major duties represents a composite list of typical duties performed by individuals in this position. • Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division: • Assists in servicing and replacing minor plumbing fixtures. • Performs minor electrical work not requiring a licensed electrician such as replacing light bulbs and fuses. • Assists in minor carpentry and repair work. • Maintain machinery, equipment, and tools by cleaning, lubricating, greasing, and oiling, to ensure optimum working order. • Applies paint, varnish, and stain to all types of surfaces in order to protect and beautify surfaces using appropriate tools and equipment; and performs related duties as required. • Maintenance Technician II Duties: Performs preventive maintenance and makes repairs to heating, ventilating, air conditioning equipment according to instructions such as replacing belts on motors, changing filters, bearings, etc. • Maintains and makes routine repairs to electrically powered equipment and appliances according to instruction from senior technicians and equipment service manual. • Apply carpentry techniques and using carpentry tools to construct, alter, repair, and/or install walls, stairs, floors, ceiling, windows, doors, roofs, gutters, and locks. • Perform structural repair, alterations, or improvement work such as preparing surfaces for plaster or cement work; studding, wiring, and plastering walls. • Install glass in doors and windows; All duties covered under Maintenance Technician I; and performs related duties as required. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas. • Ethics and Values: Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. • Mission: Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. • Problem Solving: Accurately assesses maintenance problems of a routine nature and initiates corrective action. • Continuous Learning: Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. • Commitment to Diversity: Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. • Customer Service: Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. • Collaboration: Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Maintenance Technician: • Maintenance Technician I Requirements: A high school diploma and at least one year of general building repair and maintenance; or an equivalent combination of education and experience. • Knowledge in a variety of trade areas common to the field of building maintenance • Knowledge of the use and operation of hand tools, power tools, and equipment • Ability to lift and carry heavy objects. • Ability to climb and work on scaffolds and ladders, Physical stamina, and endurance. • Additional Requirements for Maintenance Technician II: A minimum of two years' experience working at the entry level. • A demonstration of competence and expertise in an area of specialization consistent with licensed and unlicensed trades utilized by the Court Facilities Bureau • The acquisition of a trade or technical license where applicable is preferred. • Ability to give direction and instruction to senior staff. Closing Date/Time: 2024-09-22
May 24, 2024
Full Time
Title: Maintenance Tech-Boston Pay Grade: 9 Starting Pay: $45,943.50/Yr. Departmental Mission Statement: The Facilities Management and Capital Planning department provides for the management and maintenance of 62 state-owned courthouses, and 42 leased facilities located in ten counties of the Commonwealth. The Department is committed to administering effective property management, facility operations, facility renewal, and the delivery of quality customer service in support of the administration of justice throughout the Commonwealth. FACILITES MANAGEMENT & CAPITAL PLANNING ORGANIZATIONAL PROFILE: Notes: The hours for this position is 6am-2pm. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. This posting will remain open until filled;however, preference will be given to candidates that applied during the initial 14 day posting period. Position Summary • This series is responsible for assisting in a range of skilled trades duties for both licensed and unlicensed trades. • Duties focus on the application of complex materials and compounds consistent with general contracting work. • Other duties include providing assistance in repairing, installing, and testing various types of systems and equipment. • A classification above the entry level requires the performance of increasingly more responsible and complex work which requires advanced skill and experience. • Employees are appointed at the entry level and are eligible for reclassification to the higher grade within this series consistent with the requirements in the job description. • The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Receives moderate supervision from the Facilities Supervisor in performing structured but not always routine work. • Moderate judgment is required. ORGANIZATIONAL LEVELS: Maintenance Technician I - This is the entry level position title within this series. • Employees at this level are expected to perform minor repairs and improvements in a variety of trades under the direction of a building or maintenance supervisor. • Maintenance Technician II - This is the second level position title within this series. • Employees at this level are expected begin to develop a trade of expertise utilized by the Court Facilities Bureau and have the ability to work independently in the performance of standard maintenance and repairs. Maintenance Technician I Duties : The following list of major duties represents a composite list of typical duties performed by individuals in this position. • Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division: • Assists in servicing and replacing minor plumbing fixtures. • Performs minor electrical work not requiring a licensed electrician such as replacing light bulbs and fuses. • Assists in minor carpentry and repair work. • Maintain machinery, equipment, and tools by cleaning, lubricating, greasing, and oiling, to ensure optimum working order. • Applies paint, varnish, and stain to all types of surfaces in order to protect and beautify surfaces using appropriate tools and equipment; and performs related duties as required. • Maintenance Technician II Duties: Performs preventive maintenance and makes repairs to heating, ventilating, air conditioning equipment according to instructions such as replacing belts on motors, changing filters, bearings, etc. • Maintains and makes routine repairs to electrically powered equipment and appliances according to instruction from senior technicians and equipment service manual. • Apply carpentry techniques and using carpentry tools to construct, alter, repair, and/or install walls, stairs, floors, ceiling, windows, doors, roofs, gutters, and locks. • Perform structural repair, alterations, or improvement work such as preparing surfaces for plaster or cement work; studding, wiring, and plastering walls. • Install glass in doors and windows; All duties covered under Maintenance Technician I; and performs related duties as required. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas. • Ethics and Values: Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. • Mission: Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. • Problem Solving: Accurately assesses maintenance problems of a routine nature and initiates corrective action. • Continuous Learning: Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. • Commitment to Diversity: Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. • Customer Service: Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. • Collaboration: Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Maintenance Technician: • Maintenance Technician I Requirements: A high school diploma and at least one year of general building repair and maintenance; or an equivalent combination of education and experience. • Knowledge in a variety of trade areas common to the field of building maintenance • Knowledge of the use and operation of hand tools, power tools, and equipment • Ability to lift and carry heavy objects. • Ability to climb and work on scaffolds and ladders, Physical stamina, and endurance. • Additional Requirements for Maintenance Technician II: A minimum of two years' experience working at the entry level. • A demonstration of competence and expertise in an area of specialization consistent with licensed and unlicensed trades utilized by the Court Facilities Bureau • The acquisition of a trade or technical license where applicable is preferred. • Ability to give direction and instruction to senior staff. Closing Date/Time: 2024-09-22
Description The Correction Facility Technician I performs semi-skilled to skilled work in the maintenance and repair of the Sheriff's Department, Detention Center, and jail facilities. Work involves the maintenance and repair of mechanical and electrical equipment including jail security systems and performing a variety of maintenance and repair tasks requiring knowledge of building trade skills. Employee is responsible for performing semi-skilled work in one or more building trades, such as electrical, plumbing, carpentry, painting and/or installation of heating and air conditioning equipment. Examples of Duties Performs maintenance work on mechanical and technical security systems, including security locks and doors, surveillance systems, fire alarms, smoke exhaust systems, life safety equipment, etc. Assists in the development and implementation of preventive maintenance programs and schedules for correctional facilities, mechanical systems, and technical systems. Assists in the development of plans for facility improvements and/or maintenance tasks; estimates the cost of repairs and improvements. Performs carpentry and renovation work in the construction, repair, or alteration of floors, roofs, stairways, partitions, doors, windows and screens. Builds or repairs partitions, cabinets, tables, shelves, and bookcases. Performs maintenance work on heating and air conditioning systems by checking thermostats, couplers, fuses, belts, motors, etc. Assists in major heating and air conditioning repair projects. Performs skilled plumbing tasks including changing faucet washers, stems, seals, etc. by installing water and sanitary fixtures and equipment and repairing toilets by changing tank bulbs, overflow tubes, guide wires, etc. Sands, paints, or stains walls, woodwork, cabinets, tables, and other wooden articles. Hangs and finishes sheetrock, paneling, wallpaper, tile, and moldings. Installs and repairs carpeting, glass panes, and suspended ceiling grids and tiles. Supervises activities of inmate trustees assigned to work projects, ensuring adherence to established policies, procedures and standards. Reviews and inspects contracted work for quality and compliance with appropriate standards. Regular and punctual attendance is required. Performs other related duties as required. Minimum Qualifications High School diploma or GED and a minimum one year of experience in a related field; or an equivalent combination of education and related experience required. Must be a U.S. citizen. Must attain certification by the Texas Commission on Law Enforcement as a Jailer within one (1) year of employment. Possession of a valid driver's license. Must be able to obtain a State of Texas driver's license within 90 days. Supplemental Information To ensure proper delivery of emails please add jobs@dentoncounty.go v to your email safe list . Closing Date/Time: Continuous
Mar 08, 2024
Full Time
Description The Correction Facility Technician I performs semi-skilled to skilled work in the maintenance and repair of the Sheriff's Department, Detention Center, and jail facilities. Work involves the maintenance and repair of mechanical and electrical equipment including jail security systems and performing a variety of maintenance and repair tasks requiring knowledge of building trade skills. Employee is responsible for performing semi-skilled work in one or more building trades, such as electrical, plumbing, carpentry, painting and/or installation of heating and air conditioning equipment. Examples of Duties Performs maintenance work on mechanical and technical security systems, including security locks and doors, surveillance systems, fire alarms, smoke exhaust systems, life safety equipment, etc. Assists in the development and implementation of preventive maintenance programs and schedules for correctional facilities, mechanical systems, and technical systems. Assists in the development of plans for facility improvements and/or maintenance tasks; estimates the cost of repairs and improvements. Performs carpentry and renovation work in the construction, repair, or alteration of floors, roofs, stairways, partitions, doors, windows and screens. Builds or repairs partitions, cabinets, tables, shelves, and bookcases. Performs maintenance work on heating and air conditioning systems by checking thermostats, couplers, fuses, belts, motors, etc. Assists in major heating and air conditioning repair projects. Performs skilled plumbing tasks including changing faucet washers, stems, seals, etc. by installing water and sanitary fixtures and equipment and repairing toilets by changing tank bulbs, overflow tubes, guide wires, etc. Sands, paints, or stains walls, woodwork, cabinets, tables, and other wooden articles. Hangs and finishes sheetrock, paneling, wallpaper, tile, and moldings. Installs and repairs carpeting, glass panes, and suspended ceiling grids and tiles. Supervises activities of inmate trustees assigned to work projects, ensuring adherence to established policies, procedures and standards. Reviews and inspects contracted work for quality and compliance with appropriate standards. Regular and punctual attendance is required. Performs other related duties as required. Minimum Qualifications High School diploma or GED and a minimum one year of experience in a related field; or an equivalent combination of education and related experience required. Must be a U.S. citizen. Must attain certification by the Texas Commission on Law Enforcement as a Jailer within one (1) year of employment. Possession of a valid driver's license. Must be able to obtain a State of Texas driver's license within 90 days. Supplemental Information To ensure proper delivery of emails please add jobs@dentoncounty.go v to your email safe list . Closing Date/Time: Continuous
CHARLESTON COUNTY, SC
North Charleston, SC, United States
Description This position plans, supervises and coordinates a wide variety of maintenance, repairs, and special projects within the Charleston County Facilities Department, at the direction of the Trades Technician Supervisor. Typical duties include, but are not limited to, the repair, installation, and maintenance of HVAC systems, plumbing, electrical, painting and carpentry. This position will be expected to assist with administrative duties such as the computer-based work order management system, project management and procurement processes, as well as provide support to building occupants in the absence of the regular supervisor. Position requires after hours on call support on a rotating weekly schedule. Hiring Range: $47,528 - $62,285 (Estimated Annual Salary) OPEN UNTIL FILLED - APPLICATION REVIEW BEGINS IMMEDIATELY Duties and Responsibilities Duties include assures repairs, replacements and preventive maintenance of all heating/air condition equipment and components. Assures HVAC coils are cleaned as recommended by the manufacturer. Provides surveillance and temperature adjustments of the HVAC system with BMS software (building maintenance system). Repairs and replaces hot water heaters, faucets, and water lines, unclogs drains, toilets, sinks and all other plumbing repairs. Performs repairs on electrical fixtures, devices, ballast/bulb replacements. Ensures electrical, HVAC, mechanical, wastewater, potable water, plumbing and life safety systems are operational and tested on a routine basis. Assures carpentry work including locks, sheetrock repair, and painting are completed as needed within Facility. Maintains a safe, dry, and cool environment for all employees, and patrons within the Detention Center as required. Assures all work orders are properly documented with labor and materials and are completed in a timely manner. Coordinates with other facility shops and/or contractors to ensure issues are resolved in a timely and cost-effective manner. Communicates the status of all requested work to the department Supervisor or Manager, as required Ability to work within the County's procurement procedures. Serves as a liaison between the buildings' occupants, general public, and the Facilities Operations Department. Minimum Qualifications Minimum Qualification: Position requires a high school diploma (or GED) technical school diploma or Associates Degree preferred, supplemented with seven (7) or more years of progressively responsible experience in the commercial building trade and a minimum of five (5) years in a building maintenance environment or an equivalent combination of education and experience. Work history related to duties and responsibilities as described. References are required. Must possess a valid SC driver's license and pass a SLED criminal background check. Knowledge, Skills and Abilities Must be able to be on call 24/7 and available to work various shifts. Must be available for and report to work during a declared County emergency. Must possess excellent interpersonal skills. Ability to communicate effectively within varying levels of management. Ability to provide feedback in both written and oral forms. Individual must be willing to work in a Detention Center environment. Proficiency in Microsoft Office required.Closing Date/Time:
Mar 21, 2024
Full Time
Description This position plans, supervises and coordinates a wide variety of maintenance, repairs, and special projects within the Charleston County Facilities Department, at the direction of the Trades Technician Supervisor. Typical duties include, but are not limited to, the repair, installation, and maintenance of HVAC systems, plumbing, electrical, painting and carpentry. This position will be expected to assist with administrative duties such as the computer-based work order management system, project management and procurement processes, as well as provide support to building occupants in the absence of the regular supervisor. Position requires after hours on call support on a rotating weekly schedule. Hiring Range: $47,528 - $62,285 (Estimated Annual Salary) OPEN UNTIL FILLED - APPLICATION REVIEW BEGINS IMMEDIATELY Duties and Responsibilities Duties include assures repairs, replacements and preventive maintenance of all heating/air condition equipment and components. Assures HVAC coils are cleaned as recommended by the manufacturer. Provides surveillance and temperature adjustments of the HVAC system with BMS software (building maintenance system). Repairs and replaces hot water heaters, faucets, and water lines, unclogs drains, toilets, sinks and all other plumbing repairs. Performs repairs on electrical fixtures, devices, ballast/bulb replacements. Ensures electrical, HVAC, mechanical, wastewater, potable water, plumbing and life safety systems are operational and tested on a routine basis. Assures carpentry work including locks, sheetrock repair, and painting are completed as needed within Facility. Maintains a safe, dry, and cool environment for all employees, and patrons within the Detention Center as required. Assures all work orders are properly documented with labor and materials and are completed in a timely manner. Coordinates with other facility shops and/or contractors to ensure issues are resolved in a timely and cost-effective manner. Communicates the status of all requested work to the department Supervisor or Manager, as required Ability to work within the County's procurement procedures. Serves as a liaison between the buildings' occupants, general public, and the Facilities Operations Department. Minimum Qualifications Minimum Qualification: Position requires a high school diploma (or GED) technical school diploma or Associates Degree preferred, supplemented with seven (7) or more years of progressively responsible experience in the commercial building trade and a minimum of five (5) years in a building maintenance environment or an equivalent combination of education and experience. Work history related to duties and responsibilities as described. References are required. Must possess a valid SC driver's license and pass a SLED criminal background check. Knowledge, Skills and Abilities Must be able to be on call 24/7 and available to work various shifts. Must be available for and report to work during a declared County emergency. Must possess excellent interpersonal skills. Ability to communicate effectively within varying levels of management. Ability to provide feedback in both written and oral forms. Individual must be willing to work in a Detention Center environment. Proficiency in Microsoft Office required.Closing Date/Time:
CHARLESTON COUNTY, SC
North Charleston, SC, United States
Description This position plans, and coordinates a wide variety of maintenance, repairs, and special projects within the Charleston County Facilities Management Department, at the direction of the Facility Supervisor . Typical duties include, but are not limited to, the repair, installation, and maintenance of HVAC systems, plumbing, electrical, painting and carpentry. This position will be expected to assist with administrative duties such as the computer-based work order management system, as well as provide support to building occupants in the absence of the Trades Technician III. HIRING SALARY: $37,897 - $49,649 (Estimated Annual Salary) OPEN UNTIL FILLED - APPLICATION REVIEW BEGINS IMMEDIATELY Duties and Responsibilities Duties include assist in repairs, replacements and preventive maintenance of all heating/air conditioning equipment and components. Assures HVAC coils are cleaned as recommended by the manufacturer. Monitors temperatures of all HVAC systems, performing adjustments as needed utilizing the BMS software (building maintenance system). Repairs and replaces hot water heaters, faucets, water lines, unclogs drains, toilets, sinks and all other plumbing repairs. Performs repairs on electrical fixtures, devices ballast/bulb replacements. Ensures electrical, HVAC, mechanical, wastewater, potable water, plumbing and life safety systems are operational and tested on a routine basis. Assures carpentry work including locks, sheetrock repair, and painting are completed as needed within Facility. Maintains a safe, dry, and cool environment for all employees, and patrons within Charleston County Facilities as required. Assures all work orders are properly documented with labor and materials and are completed in a timely manner. Communicates the status of all requested work to the department Supervisor or Manager, as required. Ability to work within the County's policies and procedures. Minimum Qualifications Education: High School Diploma or Equivalent Experience: Commercial/Industrial Facilities Maintenance: 2 years (Preferred) Computer/Microsoft Office: 2 years (Preferred) Two years or more of progressively responsible experience in one or more of the above building trades and a minimum of two years in a commercial building maintenance environment or an equivalent combination of education and experience. Knowledge, Skills and Abilities Position requires a high school diploma. Must be able to provide and receive feedback in both written and oral forms. Proficient with Microsoft Office and the ability to utilize computer-controlled HVAC and lighting systems (BMS). Must possess valid SC Driver's License and pass a SLED background check. Must be able to follow instructions and other detailed work assignments. Must be able to master the Facilities Management Work order accountability system. Must be able to be on call 24/7 on a rotating schedule and available to work in emergency situations. This position requires repetitive bending, kneeling, standing, climbing, prolonged sitting and the capability to lift up to 50 pounds. Be available for and report to work during a declared County emergency. Possess excellent interpersonal and customer service skills.Closing Date/Time:
Mar 21, 2024
Full Time
Description This position plans, and coordinates a wide variety of maintenance, repairs, and special projects within the Charleston County Facilities Management Department, at the direction of the Facility Supervisor . Typical duties include, but are not limited to, the repair, installation, and maintenance of HVAC systems, plumbing, electrical, painting and carpentry. This position will be expected to assist with administrative duties such as the computer-based work order management system, as well as provide support to building occupants in the absence of the Trades Technician III. HIRING SALARY: $37,897 - $49,649 (Estimated Annual Salary) OPEN UNTIL FILLED - APPLICATION REVIEW BEGINS IMMEDIATELY Duties and Responsibilities Duties include assist in repairs, replacements and preventive maintenance of all heating/air conditioning equipment and components. Assures HVAC coils are cleaned as recommended by the manufacturer. Monitors temperatures of all HVAC systems, performing adjustments as needed utilizing the BMS software (building maintenance system). Repairs and replaces hot water heaters, faucets, water lines, unclogs drains, toilets, sinks and all other plumbing repairs. Performs repairs on electrical fixtures, devices ballast/bulb replacements. Ensures electrical, HVAC, mechanical, wastewater, potable water, plumbing and life safety systems are operational and tested on a routine basis. Assures carpentry work including locks, sheetrock repair, and painting are completed as needed within Facility. Maintains a safe, dry, and cool environment for all employees, and patrons within Charleston County Facilities as required. Assures all work orders are properly documented with labor and materials and are completed in a timely manner. Communicates the status of all requested work to the department Supervisor or Manager, as required. Ability to work within the County's policies and procedures. Minimum Qualifications Education: High School Diploma or Equivalent Experience: Commercial/Industrial Facilities Maintenance: 2 years (Preferred) Computer/Microsoft Office: 2 years (Preferred) Two years or more of progressively responsible experience in one or more of the above building trades and a minimum of two years in a commercial building maintenance environment or an equivalent combination of education and experience. Knowledge, Skills and Abilities Position requires a high school diploma. Must be able to provide and receive feedback in both written and oral forms. Proficient with Microsoft Office and the ability to utilize computer-controlled HVAC and lighting systems (BMS). Must possess valid SC Driver's License and pass a SLED background check. Must be able to follow instructions and other detailed work assignments. Must be able to master the Facilities Management Work order accountability system. Must be able to be on call 24/7 on a rotating schedule and available to work in emergency situations. This position requires repetitive bending, kneeling, standing, climbing, prolonged sitting and the capability to lift up to 50 pounds. Be available for and report to work during a declared County emergency. Possess excellent interpersonal and customer service skills.Closing Date/Time:
Merced County, CA
Merced, California, United States
Examples of Duties Desirable qualifications: Experience in a commercial setting. The ability to repair steam and/or hot water boilers, refrigeration, heating and air conditioning, cooling towers, pumps, and air compressor. Duties may include, but are not limited to, the following: Works from sketches, blueprints and oral/written instructions to make repairs and adjustments on electric, pneumatic and electronic control devices, steam and/or hot water boilers, pumps. Repair and Maintain ventilation systems, air compressors, emergency generators, and air conditioning equipment. Performs charging, evacuating, condenser cleaning and filter changing. Repairs or replaces boiler refectories, boiler blowers; adjusts burners, high and low water cut-out controls. Replaces pump couplings, motor bearings, belt-sheaves, and belts. Lubricates all mechanical equipment. May perform work on general carpentry, painting, roofing, masonry, electrical wiring, switches, outlets, controls and lighting systems. Maintains proper water treatment by means of chemicals. Programs and monitors the computerized energy system which includes heating/air conditioning systems. Completes reports on performance and problems. Troubleshoots the computerized system and establishes stop/start time on the systems. Monitors alarms and follows up on system failures such as switches and fans. Works with users on complaints. Overhauls and balance and air flow calibration. Repairs and maintains air conditioning systems, zoning heating/cooling refrigeration duct work, ventilation, chilled water heating/cooling compressor type, rooftop cooling duct work, packaged air cool, multi-zone rooftop heating/cooling systems. Observes and adjusts meters, gauges and control panels. Performs maintenance on auxiliary mechanical equipment. Performs charging, evacuating, condenser cleaning and filter changing. Performs maintenance in correctional facilities. Minimum Qualifications HVAC TECHNICIAN II Experience: Four (4) years experience, including two (2) years in building maintenance and repair and two (2) years in the mechanical operation, maintenance, and repair of heating and air conditioning systems and electrical control devices of a large building or plant facility. License: Possess a valid California driver's license at time of appointment and maintain. EPA Certification for Refrigeration Gas Recovery SOME POSITIONS IN THIS CLASSIFICATION WILL BE SUBJECT TO CRIMINAL HISTORY BACKGROUND CHECKS PURSUANT TO THE HUMAN RESOURCES RULES AND REGULATIONS, SECTION 2, B. Essential Functions ESSENTIAL FUNCTIONS Operate a personal computer and other office and maintenance equipment. Communicate effectively with others in person and over the telephone. Analyze data, interpret directions, procedures and regulations, and develop appropriate responses. Perform job duties under stressful conditions. Respond appropriately to situations. Maintain confidential information in accordance with legal standards and/or County regulations. Wear a respirator or safety glasses or other protective clothing and equipment. Lift up to 50 pounds individually and move, with help, objects weighing over 50 pounds. Walk, stand, stoop, kneel or crouch on narrow, slippery or uneven surfaces under various environmental conditions. Work from ladders, various heights and awkward positions. Perform a variety of emergency maintenance and repairs. Frequently work around dust, dirt, strong odors and noise. Frequent use of depth perception, peripheral vision and color perception. Sit, stand or walk for extended periods. Occasionally reach, push, pull, twist and manipulate large and small objects. Occasionally kneel, bend, twist, squat, climb, balance and crawl. Frequent use of hand-eye coordination. Frequent use of a data entry device including repetitive hand and arm motion. Regular attendance is an essential function. Knowledge of: Low pressure boilers, ventilating, refrigeration, absorption air conditioning, power and related mechanical building systems and equipment. Plumbing, die thread cutting, union and fitting replacement, open drains and finish replacement. General procedures of operation and maintenance of mechanical equipment, tools, and supplies used in the repair and maintenance of equipment. Electrical and building construction codes and the basic regulations and ordinances relating to the construction and repair of building equipment and buildings. First aid techniques. Occupational hazards and safety precautions of the building and mechanical trades. Energy Management Computerized System and its operations. Ability to: Learn Energy Management Computerized System and its operations. Operate, maintain and repair air conditioning, heating, ventilating, refrigeration and related mechanical building systems. Use hand and power tools, materials and instruments, utilized in the building mechanical trades. Work under stress and in emergency situations. Make written reports. Follow oral and written instructions. Work cooperatively with others. Read at the level required in the position to interpret and work from technical sketches, blueprints and plans. Program and monitor the computerized heating and air conditioning systems making adjustments through computer control panels. HOLIDAYS & LEAVES VACATION 10 days the first 5 years of continuous employment (limited to a maximum of 160 hours), 15 days in the second 5 years of continuous employment (limited to a maximum of 240 hours), and 20 days after 10 years of continuous employment (limited to a maximum of 320 hours). SICK LEAVE .0462 hours sick leave for each paid regularly scheduled work hour. 12 days (96 hours per year) with unlimited accumulation. Optional annual buy back of a portion of accumulated sick leave hours upon meeting certain criteria. HOLIDAYS Twelve paid holidays annually plus one optional holiday. BEREAVEMENT LEAVE Three (3) regularly scheduled work days or five (5) days if distance traveled over 500 miles one-way. INSURANCE HEALTH INSURANCE Medical Insurance - Merced County offers five Medical Plans and contributes towards employee and dependent premiums. Medical plan availability varies based on bargaining units. Anthem 200 EPO Anthem 500 EPO Anthem 1500 EPO Anthem HDHP (High Deductible Medical Plan) with Health Savings Account (HSA) Anthem HDHP (High Deductible Medical Plan) without Health Savings Account (HSA) Dental Insurance -Delta Dental Calendar Year Maximums County pays 100% of the premium for employees and 50% for dependent(s) Vision Insurance - VSP County pays 100% of the premium for employees and 50% for dependent(s) DISABILITY INSURANCE State Disability Insurance - Benefit based on highest quarter during previous calendar year. Employee pays premium. LIFE INSURANCE $10,000 County-paid coverage (Accidental Death and Dismemberment included). Voluntary Term Life and Universal Life Insurance available - premium paid by employee. RETIREMENT DEFERRED COMPENSATION The County offers a 457 Deferred Compensation Plan. Employees choose their investment funds and can make pretax contributions to the plan up to the maximum allowable. MERCED COUNTY EMPLOYEE RETIREMENT ASSOCIATION The retirement plan is a defined benefit plan administered pursuant to the County Employees Retirement Law of 1937 and other provisions of the California Government Code. MCERA members also pay into Social Security.The applicable benefit formula is dependent upon your hire date with an MCERA employer; yourpension amount will be determined by your age, years of service and final compensation amount. EXTRA HELP EMPLOYEES DO NOT QUALIFY FOR COUNTY BENEFITS. EMPLOYEE PROGRAMS EMPLOYEE ASSISTANCE PROGRAM (EAP ) Anthem EAP services provides up to five face-to-face counseling sessions per incident and provides a toll-free "800" hotline available 24/7 for emergencies and crisis intervention. EAP services include counseling services, legal services, financial services and work-life resource services. EMPLOYEE TICKETS, COUPONS, and DISCOUNTS The County of Merced has partnered with Employee Savings Tickets to provide discounted coupons and tickets for all county employees to attractions throughout the state and out-of-state. The discounts and coupons are available for shopping, movies, sporting events, theme parks, zoos and aquariums and much more. THIS BULLETIN IS NOT A CONTRACT AND DOES NOT CREATE CONTRACTUAL OR LEGAL RIGHTS ON BEHALF OF ANY EMPLOYEE. THIS BULLETIN IS SUBJECT OF BEING SUPPLEMENTED, MODIFIED, WITHDRAWN OR OTHERWISE CHANGED PENDING LABOR AGREEMENTS AND/OR AT THE DISCRETION OF THE COUNTY EXECUTIVE OFFICER OR AS THE BOARD OF SUPERVISORS DEEM NECESSARY. For answers to specific questions regarding employee benefits, please call Human Resources at 209.385.7682. Closing Date/Time: Continuous
May 06, 2024
Full Time
Examples of Duties Desirable qualifications: Experience in a commercial setting. The ability to repair steam and/or hot water boilers, refrigeration, heating and air conditioning, cooling towers, pumps, and air compressor. Duties may include, but are not limited to, the following: Works from sketches, blueprints and oral/written instructions to make repairs and adjustments on electric, pneumatic and electronic control devices, steam and/or hot water boilers, pumps. Repair and Maintain ventilation systems, air compressors, emergency generators, and air conditioning equipment. Performs charging, evacuating, condenser cleaning and filter changing. Repairs or replaces boiler refectories, boiler blowers; adjusts burners, high and low water cut-out controls. Replaces pump couplings, motor bearings, belt-sheaves, and belts. Lubricates all mechanical equipment. May perform work on general carpentry, painting, roofing, masonry, electrical wiring, switches, outlets, controls and lighting systems. Maintains proper water treatment by means of chemicals. Programs and monitors the computerized energy system which includes heating/air conditioning systems. Completes reports on performance and problems. Troubleshoots the computerized system and establishes stop/start time on the systems. Monitors alarms and follows up on system failures such as switches and fans. Works with users on complaints. Overhauls and balance and air flow calibration. Repairs and maintains air conditioning systems, zoning heating/cooling refrigeration duct work, ventilation, chilled water heating/cooling compressor type, rooftop cooling duct work, packaged air cool, multi-zone rooftop heating/cooling systems. Observes and adjusts meters, gauges and control panels. Performs maintenance on auxiliary mechanical equipment. Performs charging, evacuating, condenser cleaning and filter changing. Performs maintenance in correctional facilities. Minimum Qualifications HVAC TECHNICIAN II Experience: Four (4) years experience, including two (2) years in building maintenance and repair and two (2) years in the mechanical operation, maintenance, and repair of heating and air conditioning systems and electrical control devices of a large building or plant facility. License: Possess a valid California driver's license at time of appointment and maintain. EPA Certification for Refrigeration Gas Recovery SOME POSITIONS IN THIS CLASSIFICATION WILL BE SUBJECT TO CRIMINAL HISTORY BACKGROUND CHECKS PURSUANT TO THE HUMAN RESOURCES RULES AND REGULATIONS, SECTION 2, B. Essential Functions ESSENTIAL FUNCTIONS Operate a personal computer and other office and maintenance equipment. Communicate effectively with others in person and over the telephone. Analyze data, interpret directions, procedures and regulations, and develop appropriate responses. Perform job duties under stressful conditions. Respond appropriately to situations. Maintain confidential information in accordance with legal standards and/or County regulations. Wear a respirator or safety glasses or other protective clothing and equipment. Lift up to 50 pounds individually and move, with help, objects weighing over 50 pounds. Walk, stand, stoop, kneel or crouch on narrow, slippery or uneven surfaces under various environmental conditions. Work from ladders, various heights and awkward positions. Perform a variety of emergency maintenance and repairs. Frequently work around dust, dirt, strong odors and noise. Frequent use of depth perception, peripheral vision and color perception. Sit, stand or walk for extended periods. Occasionally reach, push, pull, twist and manipulate large and small objects. Occasionally kneel, bend, twist, squat, climb, balance and crawl. Frequent use of hand-eye coordination. Frequent use of a data entry device including repetitive hand and arm motion. Regular attendance is an essential function. Knowledge of: Low pressure boilers, ventilating, refrigeration, absorption air conditioning, power and related mechanical building systems and equipment. Plumbing, die thread cutting, union and fitting replacement, open drains and finish replacement. General procedures of operation and maintenance of mechanical equipment, tools, and supplies used in the repair and maintenance of equipment. Electrical and building construction codes and the basic regulations and ordinances relating to the construction and repair of building equipment and buildings. First aid techniques. Occupational hazards and safety precautions of the building and mechanical trades. Energy Management Computerized System and its operations. Ability to: Learn Energy Management Computerized System and its operations. Operate, maintain and repair air conditioning, heating, ventilating, refrigeration and related mechanical building systems. Use hand and power tools, materials and instruments, utilized in the building mechanical trades. Work under stress and in emergency situations. Make written reports. Follow oral and written instructions. Work cooperatively with others. Read at the level required in the position to interpret and work from technical sketches, blueprints and plans. Program and monitor the computerized heating and air conditioning systems making adjustments through computer control panels. HOLIDAYS & LEAVES VACATION 10 days the first 5 years of continuous employment (limited to a maximum of 160 hours), 15 days in the second 5 years of continuous employment (limited to a maximum of 240 hours), and 20 days after 10 years of continuous employment (limited to a maximum of 320 hours). SICK LEAVE .0462 hours sick leave for each paid regularly scheduled work hour. 12 days (96 hours per year) with unlimited accumulation. Optional annual buy back of a portion of accumulated sick leave hours upon meeting certain criteria. HOLIDAYS Twelve paid holidays annually plus one optional holiday. BEREAVEMENT LEAVE Three (3) regularly scheduled work days or five (5) days if distance traveled over 500 miles one-way. INSURANCE HEALTH INSURANCE Medical Insurance - Merced County offers five Medical Plans and contributes towards employee and dependent premiums. Medical plan availability varies based on bargaining units. Anthem 200 EPO Anthem 500 EPO Anthem 1500 EPO Anthem HDHP (High Deductible Medical Plan) with Health Savings Account (HSA) Anthem HDHP (High Deductible Medical Plan) without Health Savings Account (HSA) Dental Insurance -Delta Dental Calendar Year Maximums County pays 100% of the premium for employees and 50% for dependent(s) Vision Insurance - VSP County pays 100% of the premium for employees and 50% for dependent(s) DISABILITY INSURANCE State Disability Insurance - Benefit based on highest quarter during previous calendar year. Employee pays premium. LIFE INSURANCE $10,000 County-paid coverage (Accidental Death and Dismemberment included). Voluntary Term Life and Universal Life Insurance available - premium paid by employee. RETIREMENT DEFERRED COMPENSATION The County offers a 457 Deferred Compensation Plan. Employees choose their investment funds and can make pretax contributions to the plan up to the maximum allowable. MERCED COUNTY EMPLOYEE RETIREMENT ASSOCIATION The retirement plan is a defined benefit plan administered pursuant to the County Employees Retirement Law of 1937 and other provisions of the California Government Code. MCERA members also pay into Social Security.The applicable benefit formula is dependent upon your hire date with an MCERA employer; yourpension amount will be determined by your age, years of service and final compensation amount. EXTRA HELP EMPLOYEES DO NOT QUALIFY FOR COUNTY BENEFITS. EMPLOYEE PROGRAMS EMPLOYEE ASSISTANCE PROGRAM (EAP ) Anthem EAP services provides up to five face-to-face counseling sessions per incident and provides a toll-free "800" hotline available 24/7 for emergencies and crisis intervention. EAP services include counseling services, legal services, financial services and work-life resource services. EMPLOYEE TICKETS, COUPONS, and DISCOUNTS The County of Merced has partnered with Employee Savings Tickets to provide discounted coupons and tickets for all county employees to attractions throughout the state and out-of-state. The discounts and coupons are available for shopping, movies, sporting events, theme parks, zoos and aquariums and much more. THIS BULLETIN IS NOT A CONTRACT AND DOES NOT CREATE CONTRACTUAL OR LEGAL RIGHTS ON BEHALF OF ANY EMPLOYEE. THIS BULLETIN IS SUBJECT OF BEING SUPPLEMENTED, MODIFIED, WITHDRAWN OR OTHERWISE CHANGED PENDING LABOR AGREEMENTS AND/OR AT THE DISCRETION OF THE COUNTY EXECUTIVE OFFICER OR AS THE BOARD OF SUPERVISORS DEEM NECESSARY. For answers to specific questions regarding employee benefits, please call Human Resources at 209.385.7682. Closing Date/Time: Continuous
Job Summary Under general supervision, installs, maintains, tests, and repairs City of Bryan refrigeration and HVAC systems and monitors and repairs building management and building access control systems. Essential Job Functions Services, installs, and repairs HVAC and refrigeration systems (coolers, ice machines, mini-splits, etc.) using technical skills, mechanical proficiency, and knowledge of HVAC systems; inspects work to verify quality and safety compliance standards. Reviews work orders, identifies material and equipment needs for each assigned projects, defines and troubleshoots maintenance and repair issues, and resolves problems with cost-effective solutions. Inspects, tests, calibrates, installs, and repairs HVAC systems, components, controls, and devices; performs maintenance and preventive maintenance; verifies maintenance and repair issues are properly identified, addressed, and resolved. Examines HVAC system failures and equipment malfunctions; determines cause and makes repairs. Maintains documentation/records of services performed and equipment installed as required. Assists other staff as needed with general facility maintenance work. Adheres to after-hours, weekend, and holiday standby requirements as needed. Performs related duties as required. Responds regularly and promptly to work. Minimum Qualifications High School Diploma or GED . Must possess at least eight (8) years of work experience troubleshooting and repairing HVAC systems. Equivalent combinations of education, experience, certification, and training may be considered. Licenses, Certifications & Special Requirements Texas Class C driver’s license with a good driving record as measured by the City’s evaluation system. EPA Universal Technician Certification or the ability to obtain certification within six (6) months of hire. Must be available for after-hour calls as needed.
Jun 05, 2024
Full Time
Job Summary Under general supervision, installs, maintains, tests, and repairs City of Bryan refrigeration and HVAC systems and monitors and repairs building management and building access control systems. Essential Job Functions Services, installs, and repairs HVAC and refrigeration systems (coolers, ice machines, mini-splits, etc.) using technical skills, mechanical proficiency, and knowledge of HVAC systems; inspects work to verify quality and safety compliance standards. Reviews work orders, identifies material and equipment needs for each assigned projects, defines and troubleshoots maintenance and repair issues, and resolves problems with cost-effective solutions. Inspects, tests, calibrates, installs, and repairs HVAC systems, components, controls, and devices; performs maintenance and preventive maintenance; verifies maintenance and repair issues are properly identified, addressed, and resolved. Examines HVAC system failures and equipment malfunctions; determines cause and makes repairs. Maintains documentation/records of services performed and equipment installed as required. Assists other staff as needed with general facility maintenance work. Adheres to after-hours, weekend, and holiday standby requirements as needed. Performs related duties as required. Responds regularly and promptly to work. Minimum Qualifications High School Diploma or GED . Must possess at least eight (8) years of work experience troubleshooting and repairing HVAC systems. Equivalent combinations of education, experience, certification, and training may be considered. Licenses, Certifications & Special Requirements Texas Class C driver’s license with a good driving record as measured by the City’s evaluation system. EPA Universal Technician Certification or the ability to obtain certification within six (6) months of hire. Must be available for after-hour calls as needed.
WAKE COUNTY, NC
Raleigh, North Carolina, United States
This position is 2nd shift with a 10% shift premium! What You'll Be Doing Do you have a general trades background and are you looking for a career with excellent benefits including paid vacation days, holiday pay, accrued sick leave, medical benefits, 401K contribution and membership in one of the five best pension plans in the Country, according to S&P Global? If so, the Physical Plant division of Wake County General Services is looking for applicants that are skilled in these areas to fulfill our second shift General Trades Senior Technician role and would love to meet you! Key Responsibilities: Repair, replace, upgrade and maintain Wake County Facility fixtures and finishes Plan and organize work or requests for services which could include building maintenance, renovation projects, and project proposal work Inventory supplies and monitor equipment operations and usage Determine equipment and supplies to be used in fabrication or repair Coordinate work orders and supervises work projects and planning as well as inspects sites for compliance and completion Conducts system audits, prepare reports and manage programs Evaluate processes and programs and recommend procedure changes Schedule and implement repairs and supervise contractors Respond to emergency and natural disasters Participate on the Physical Plant Safety Committee and works with the Safety Officer to maintain safe working environment NOTE: A criminal background and credit check will be conducted. About Our Team General Services Administration (GSA) manages Wake County owned and leased facilities, the Wake County fleet, provides criminal justice support and supports a number of General Government business units. GSA is dedicated to ensuring safe, productive work environments and safe, reliable vehicles for our customers. The Basics (Required Education and Experience) High school diploma or GED Two years of experience in general trades Valid Driver's License and "safe" driving record Equivalent education and experience are accepted Please include ALL prior work experience on your application and resume. Beyond the Basics (Preferred Education and Experience) Associate’s Degree in Construction Management, carpentry or related trades Three Years experience in framing, painting, general building maintenance, and construction NC General Contractors License How Will We Know You're 'The One'? Knowledge of commercial building roof and building envelope systems • Ability to read blueprints, work orders and various schematics Knowledge of relevant building codes and regulations Ability to work cooperatively with other trades staff Proven problem solving and decision making skills Effective verbal and listening communication skills Ability to work off of ladders and motorized lifts Ability to work on roofs and elevated structures Ability to operate forklifts and pallet jacks Ability to work in a fast paced environment Ability to work with limited supervision Effective time management skills About This Position Location: General Services Center Raleigh, NC 27610 Employment Type: Regular Work Schedule: Mon - Fri 4:00pm - 12:30am Hiring Range: 22.00 - 28.80 with 10% premium Market Range: 21.33 - 36.27 Please include ALL prior work experience on your application and resume. Posting Closing Date: This position is open until filled and may close at any time. What Makes Wake Great Home to the State Capital, Wake County is one of the fastest growing areas in the nation and the most populous county in the state, with more than 1.1 million residents. The County has received national and international rankings and accolades from publications such as Money, Fortune, and Time magazines as being one of the best places to live, work and play. The central location of the County allows for a short drive to the spectacular mountains or coast. Wake County Government is governed by a seven-member Board of Commissioners, who are elected at-large to serve two-year terms. Wake County Government has a general operating budget of $1.874 billion, employs over 4400 employees, experiences minimal turnover, and is an award-winning leader in wellness and technology initiatives; such as offering employees and covered spouses free access to the Employee Health Center. Wake County Government offers a wide range of training and development opportunities, a stable career in public service with a balance of work and family life, flexible work schedules and a competitive salary and benefits package. Equal Opportunity Statement Wake County provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. Background Check Statement Position may require a background check that may include: criminal, credit, motor vehicle, education, and sexual offender registry or others based on job requirements. Unless required by state law, a record of conviction will not automatically exclude you from consideration for employment. Wake County Government is an Equal Opportunity Employer. Emergency Service Worker Statement In the event of an emergency, as determined by the County Manager or designee, participation in preparedness and response operations should be expected. Employee may be required to fill a temporary assignment in a role different from standard duties, work hours and/or work location in preparation for, during and after the emergency. Employee may also be required to participate in relevant exercises and regular preparedness training.
Jun 08, 2024
This position is 2nd shift with a 10% shift premium! What You'll Be Doing Do you have a general trades background and are you looking for a career with excellent benefits including paid vacation days, holiday pay, accrued sick leave, medical benefits, 401K contribution and membership in one of the five best pension plans in the Country, according to S&P Global? If so, the Physical Plant division of Wake County General Services is looking for applicants that are skilled in these areas to fulfill our second shift General Trades Senior Technician role and would love to meet you! Key Responsibilities: Repair, replace, upgrade and maintain Wake County Facility fixtures and finishes Plan and organize work or requests for services which could include building maintenance, renovation projects, and project proposal work Inventory supplies and monitor equipment operations and usage Determine equipment and supplies to be used in fabrication or repair Coordinate work orders and supervises work projects and planning as well as inspects sites for compliance and completion Conducts system audits, prepare reports and manage programs Evaluate processes and programs and recommend procedure changes Schedule and implement repairs and supervise contractors Respond to emergency and natural disasters Participate on the Physical Plant Safety Committee and works with the Safety Officer to maintain safe working environment NOTE: A criminal background and credit check will be conducted. About Our Team General Services Administration (GSA) manages Wake County owned and leased facilities, the Wake County fleet, provides criminal justice support and supports a number of General Government business units. GSA is dedicated to ensuring safe, productive work environments and safe, reliable vehicles for our customers. The Basics (Required Education and Experience) High school diploma or GED Two years of experience in general trades Valid Driver's License and "safe" driving record Equivalent education and experience are accepted Please include ALL prior work experience on your application and resume. Beyond the Basics (Preferred Education and Experience) Associate’s Degree in Construction Management, carpentry or related trades Three Years experience in framing, painting, general building maintenance, and construction NC General Contractors License How Will We Know You're 'The One'? Knowledge of commercial building roof and building envelope systems • Ability to read blueprints, work orders and various schematics Knowledge of relevant building codes and regulations Ability to work cooperatively with other trades staff Proven problem solving and decision making skills Effective verbal and listening communication skills Ability to work off of ladders and motorized lifts Ability to work on roofs and elevated structures Ability to operate forklifts and pallet jacks Ability to work in a fast paced environment Ability to work with limited supervision Effective time management skills About This Position Location: General Services Center Raleigh, NC 27610 Employment Type: Regular Work Schedule: Mon - Fri 4:00pm - 12:30am Hiring Range: 22.00 - 28.80 with 10% premium Market Range: 21.33 - 36.27 Please include ALL prior work experience on your application and resume. Posting Closing Date: This position is open until filled and may close at any time. What Makes Wake Great Home to the State Capital, Wake County is one of the fastest growing areas in the nation and the most populous county in the state, with more than 1.1 million residents. The County has received national and international rankings and accolades from publications such as Money, Fortune, and Time magazines as being one of the best places to live, work and play. The central location of the County allows for a short drive to the spectacular mountains or coast. Wake County Government is governed by a seven-member Board of Commissioners, who are elected at-large to serve two-year terms. Wake County Government has a general operating budget of $1.874 billion, employs over 4400 employees, experiences minimal turnover, and is an award-winning leader in wellness and technology initiatives; such as offering employees and covered spouses free access to the Employee Health Center. Wake County Government offers a wide range of training and development opportunities, a stable career in public service with a balance of work and family life, flexible work schedules and a competitive salary and benefits package. Equal Opportunity Statement Wake County provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. Background Check Statement Position may require a background check that may include: criminal, credit, motor vehicle, education, and sexual offender registry or others based on job requirements. Unless required by state law, a record of conviction will not automatically exclude you from consideration for employment. Wake County Government is an Equal Opportunity Employer. Emergency Service Worker Statement In the event of an emergency, as determined by the County Manager or designee, participation in preparedness and response operations should be expected. Employee may be required to fill a temporary assignment in a role different from standard duties, work hours and/or work location in preparation for, during and after the emergency. Employee may also be required to participate in relevant exercises and regular preparedness training.
City of LIvermore
Livermore, California, United States
Description Click here for the job announcement! This recruitment will be open continuously with a first review date of July 5th, 2024 at 5:00 pm PST. Qualified applicants are encouraged to apply early. This recruitment is subject to close at any time. The Water Resources Division provides a dynamic and supportive work environment providing critical services to the community. Come join the team at the Water Reclamation Plant - 101 West Jack London Boulevard in Livermore! There are three (3) Water Resources Instrument Control Technician vacancies to be filled. DEFINITION Under general supervision, the Water Resources Instrument Control Technician installs, operates, maintains, calibrates, and repairs computer hardware, process instrumentation, data logging, and telemetry; de-bugs, modifies, and customizes software; modifies, maintains, and repairs all components of a programmable logic controller (PLC) based supervisory control and data acquisition (SCADA) systems/distributed control systems; and performs other duties as assigned. DISTINGUISHING CHARACTERISTICS This classification is distinguished by the specialized, technical assignments in support of SCADA systems, PLC's, distributed control systems, computer networking systems, software and instrumentation, telemetry, lab analytical equipment, safety systems, and other related systems. Incumbents will be expected to work independently in modifying, maintaining, and operating the above referenced systems. SUPERVISION RECEIVED General supervision is provided by a Public Works Supervisor and the WR Coordinator - Electrical & Instrumentation Control. SUPERVISION EXERCISED None. Examples of Important and Essential Functions Technical Functions Installs, calibrates, programs, maintains, and repairs instruments, PLC based system/distributed control system components, meters, analyzers, recorders, control and feed systems, computers, monitors, printers, transducers, microprocessors, and data transmission systems; repairs electronics, electrical, pneumatic, mechanical, and hydraulic systems; maintains and repairs laboratory and safety equipment including gas detection, alarm systems, pH and DO meters; analyzes software problems; modifies computer programs to optimize plant operations and operator convenience; analyzes problems and repairs equipment to component level; analyzes problems and repairs 480 volt alternating current (AC) motor control centers; installs and configures security systems including access control and video system; performs service and maintenance work on a variety of electrical installations, systems, pumps, meters, and other equipment in City facilities; operates diagnostic instruments such as a voltmeter, megger, ammeter, ohmmeter, transistor checker, loop meter, and other electrical test equipment installs and repairs; replaces outlets, lighting fixtures, switches, ballasts, conduit runs and distribution panels; assists in planning and scheduling preventative maintenance programs; develops and implements emergency situation plans; performs all tasks in a safe manner observing all safety practices in performance of assigned duties; trains others in the operation of new or modified computer/instrumentation systems; and upgrades existing systems as needed. Administrative Functions Assists system users in solving data and systems problems and suggests alternative methods of operation; maintains accurate records and updates shop drawings, schematics, and wiring diagrams as changes are made; maintains an inventory of parts, materials, supplies, and equipment used in everyday tasks; ensures that work orders are completed in a timely manner; provides information for budget preparation; may provide direction to temporary employees; and evaluates systems performance and recommends actions to be taken. Job Related and Essential Qualifications Demonstrated Knowledge of : Methods, practices, materials, and tools of computer/instrumentation trade; the theory, terminology, operations, equipment, and principles of electronics including practices, techniques, and tools used in the installation and maintenance and repair of electrical or electronic systems; electrical, pneumatic, instrumentation, computer, PLC, SCADA systems, and distributed control systems as they apply to wastewater treatment plant systems; applicable programming languages; computer operating systems; Electrical Safety Orders of the Division of Industrial Safety, California Code, and the National Electric Code; effective communication techniques; and federal, state, county, and local regulations and safety practices. Demonstrated Skills to : Install, program, maintain, modify, and repair computer hardware, software, PLC, and SCADA/distributed control system components; install, calibrate, maintain, and repair process instrumentation, telemetry, communication systems, and other related equipment; maintain, calibrate, and repair laboratory and safety equipment, gas detecting and alarm systems; diagnose and repair motor control systems; interpret, use, and update technical manuals, blueprints, and schematics; keep accurate, up-to-date records and prepare reports; work independently with minimal supervision; maintain parts and equipment inventory; communicate clearly and concisely, both verbally and in writing; relate effectively to those contacted in the course of work; practice safe work methods when using hand tools, test equipment, and other related equipment; understand and work from oral and written instructions as well as procedural manuals; exercise initiative and creativity in performing assigned duties; and exemplify an enthusiastic, resourceful, cooperative, and effective customer service attitude with the public, co-workers, and others contacted in the course of the work. Ability to : Effectively apply the knowledge and skills necessary for this position; and learn the systems, procedures, practices, and operations of the treatment facility and have a proactive approach to continually improve all assigned areas of responsibility. Additional Information Experience, Education, and Training Guidelines Any combination of experience, education, and training that would provide the best qualified candidates. A typical way to obtain the knowledge, skills, and abilities would be: Experience : Three years of progressively responsible experience in a wastewater treatment facility or related industrial facility, including experience maintaining and operating computer and other electronic systems. Education : Vocational/technical school certificate or an Associate degree with course work in computer science, electronics, or process control/instrumentation is desirable. Training : Any recent training such as academic courses and certification programs, which are relevant to this job classification. Certification : Possession of a California Water Environment Association (CWEA) Plant Maintenance Technologist I certification is required prior to the completion of the probationary period. Possession of a CWEA Electrical/Instrumentation Technologist Grade II certification is required within 3 years of employment. License : Possession of a valid California driver's license and a satisfactory driving record as determined by the City. Requires possession of a valid California Class A license with the appropriate endorsements prior to the completion of the probationary period. Department of Transportation (D.O.T.) Requirement : Incumbents in this job classification may be called upon, at any time, to perform safety sensitive functions, and therefore, may be subject to the Federal Highway Administration D.O.T. regulations and the City's policy concerning drug and alcohol testing as a continuing condition of employment with the City of Livermore. Other Requirements : Must be willing and able to work scheduled and emergency overtime and be available on call as required; work under adverse conditions, such as in confined and awkward spaces, in the presence of noxious odors, toxic chemicals, biological agents, and sewage; work in potentially hazardous areas; work outdoors in all weather conditions; wear and use appropriate safety clothing and equipment, including self-contained breathing devices; and travel to and attend meetings, seminars, training schools, conferences, and workshops during work and non-work hours. Special Requirements : Essential duties require the mental and/or physical ability to read fine print and fine details with no color deficiencies; drive a motor vehicle; converse on the telephone and in person and be clearly understood; detect noises in electronic equipment; operate a computer keyboard and other electronic equipment necessary for this position; manipulate small parts and components; strength to safely lift and maneuver equipment and tools weighing up to 50 pounds; and bend, stretch, reach, stoop, and climb flights of stairs for prolonged periods of time and/or numerous times each day. CITY OF LIVERMORE BENEFITS SUMMARY Association of Livermore Employees Please click here for a copy of the current Memorandum of Understanding (MOU) for the Association of Livermore Employees. The information contained here is a summary of benefits. For a more detailed summary of benefits for all employee groups, click here . Any errors or omissions do not constitute either an expressed or implied contract. Updated 1/2024 MOU TERM 10/01/2021 - 09/30/2025 SCHEDULED INCREASES 10/11/2021 2.0% + $725.40/year 10/10/2022 3.5% + $754.56/year 10/09/2023 2.5% + $777.36/year 10/07/2024 2.0% + $796.80/year CAFETERIA PLAN (MEDICAL, DENTAL & VISION) $1,950/month towards medical, dental, and vision; unused balance paid in cash to employee. BASIC LIFE INSURANCE& ACCIDENTAL DEATH & DISMEMBERMENT INSURANCE (AD & D) FT - $60,000 EE coverage or PT - $30,000 EE coverage, ER paid $1,000 dependent coverage, ER paid EE option to purchase $25,000 additional life insurance& supplemental life to $500,000 (not to exceed 5x annual earnings). LONG TERM DISABILITY (LTD) ER paid 60% of base monthly earnings to $5,000/month max. (180 day waiting period) PERS New City of Livermore EEs are enrolled in the 2% at 60 formula or 2% at 62 formula, depending on eligibility, as per AB 340. Classic PERS Misc Member - 2% at 60 Member Rate = 7% EE paid Employer Rate = 34.43%ER paid (includes unfunded liability; FY23/24) 36 consecutive months Final Comp Sick Leave Credit 4th Level 59 Survivor Ben. Military Service Credit New PERS Misc Member - 2% at 62 Member Rate = 7.5% EE paid Employer Rate = 34.43%ER paid (includes unfunded liability; FY23/24) 36 consecutive months Final Comp Sick Leave Credit 4th Level 59 Survivor Ben. Military Service Credit MEDICARE (Hired after 3/31/86) EE paid 1.45% ER paid 1.45% RETIREMENT HEALTH SAVINGS (RHS) ER contribution of 4% of base pay into RHS account. VACATION ACCRUAL Years of ServiceTotal Accrual Per Year 180.6 hrs 2-5120.12 hrs 6-10135.98 hrs 11-15160.94 hrs 16-19180.18 hrs 20+192.4 hrs Prorated for part-time EE. Maximum accrual: 340 hours HOLIDAYS & HOLIDAY-IN-LIEU PAY Holidays: 12 observed holidays or in lieu day off or if work 2.5 times pay. Holiday-In-Lieu Pay: EE's assigned receive 7.5% of base salary, paid per pay period SICK LEAVE ACCRUAL 96.2 hours/year Pro-rated for part-time EE SICK LEAVE USAGE: FAMILY SICK LEAVE : For immediate Family Illness- ½ Annual Sick Leave Accrual. PARENTAL LEAVE : For non-birthing parentwho becomes a parent due to adoption, foster care placement, or birth of a child- 48 hours BEREAVEMENT/ FUNERAL LEAVE (non-immediate family) : 3 regularly scheduled workdays of sick leavecanbe used foraunt or uncle. FUNERAL LEAVE 3 regularly scheduled workdays max for immediate family. PERSONAL LEAVE Full-Time: 16 hours per year Pro-rated for part-time EE. PREGNANCY LEAVE & FMLA/CFRA EE may use accrued leaves in compliance with City Rules & Regs Benefit provided as per regulations: Federal Family and Medical Leave Act, California Family Rights Act, and California Pregnancy Disability Act DEFERRED COMPENSATION 457(b) ER contributes $75 per pay period, with required matching of $75 by EE 2024 Maximum : Normal = $23,000 Age 50+ = $7,500 Catchup Limits = $46,000 Voluntary EE Participation SECTION 125 PLAN No ER contribution 2024 Maximum Dependent Care*: Up to $5,000/year -- *See IRS Pub #503 Unreimbursed Medical: Up to $3,200/year Pre-tax Health Care Premiums FSA's for Dependent Care Unreimbursed Medical Expenses Other options offered by plan administrator UNIFORM ALLOWANCE $850 per year/ paid in equal amounts per pay period For Public Safety Dispatchers, Senior Public Safety Dispatchers, Supervising Public Safety Dispatchers, Police Clerks, Senior Police Clerk, Supervising Police Clerk, Animal Control Officers, Police Identification Technician, Supervising Property and Evidence Specialist, Property and Evidence Specialist, Community Service Specialists, Crime & Intelligence Analysts, and Crime Prevention Specialist. SAFETY SHOE ALLOWANCE Paid annually in July: $200/year for Meter Readers, and employees in Engineering Technician, Neighborhood Preservation Officer, and Building Inspector series who perform field work, and Public Works employees that are required to wear safety shoes or boots. PRESCRIPTION SAFETY GLASSES Reimbursement of up to $150/year for purchase of safety prescription glasses for EEs working in locations where there is a risk of eye injuries. SHIFT DIFFERENTIAL EEs regularly assigned to city facilities operating 24/7 - $2.50/hour for all hours worked when assigned to a shift requiring EE work at least 4 hours between 4:00 p.m.- 6:00 a.m. EQUIPMENT OPERATION Public Works EEs: $12.00/day for EE who operates Class A vehicle, min of 50%+ operation/day. STANDBY PAY 2 hours straight-time for standby on regularly scheduled work day 3 hours straight-time for standby on regularly scheduled days off and fixed City holidays CALL BACK PAY 3 hours min @ OT rate for FLSA nonexempt. First 3 hours can't be taken as comp time but paid to EE. WORK IN A HIGHER CLASS If work min of 3 consecutive workdays, paid @ 5% differential or the minimum of the salary range of the higher classification. COURT PAY/COURT CANCELLATION PAY If in connection with EE's usual official duties, 3 hrs min @ OT, or 4 hrs min @ OT for those required to appear on normal day off or on graveyard shift. SUPPORT SERVICES TRAINING OFFICER PAY $90/pay period for full pay period while assigned. BILINGUAL PAY $60/pay period for both written & conversational. Must be certified by Department Head and approved by Admin Services Director, and used on the job. $35/pay period for conversation level as certified by Department Head and approved by Admin Services Director. TELEPHONE PAY 20 minutes and for each minute exceeding 20 minutes at OT rate. CELL PHONE ALLOWANCE Standard = $40/month (if authorized) See Administrative Regulation 36 for details. COMMERCIAL DRIVERS' LICENSE PAY $35/pay period with valid CA Commercial Driver's License and valid DOT medical card. OT COMP & COMP TIME OFF OT for > 40 hrs/week or > 8 hrs/day in a reg scheduled day or hrs in excess of those normally scheduled & worked/day @ 1 ½ x reg. pay or Comp Time in lieu of OT for FLSA nonexempt. Accrued Comp Time in excess of 100 hours must be paid out. TUITION REIMBURSEMENT 75% reimbursement fortuition & books For undergraduate studies, $4,000 FY max; $16,000 lifetime max For graduate studies, $5,000 FY max; $10,000 lifetime max LICENSES & CERTIFICATIONS 100% reimbursement for required licenses and certifications EMPLOYEE ASSISTANCE PROGRAM Three (3) sessions per incident per family member. Unlimited telephonic consultations. FLSA WORK PERIOD 168 hour pay period beginning Monday at 12:01 a.m., ending 7 days later on Sunday at 12:00 midnight. If an EE is not on this work week schedule, something must be in writing documenting EE's work week. For WR Operator series : 168 hour period beginning Sunday at 12:00 midnight, ending 7 days later on Saturday at 11:59 p.m. PAY PERIODS 26 pay periods per year Benefits listed are for regular full-time employees. Benefits are prorated for 30-hour and 20-hour employees. ER = Employer EE = Employee FT = Full-Time PT = Part-Time Closing Date/Time: Continuous
Jun 12, 2024
Full Time
Description Click here for the job announcement! This recruitment will be open continuously with a first review date of July 5th, 2024 at 5:00 pm PST. Qualified applicants are encouraged to apply early. This recruitment is subject to close at any time. The Water Resources Division provides a dynamic and supportive work environment providing critical services to the community. Come join the team at the Water Reclamation Plant - 101 West Jack London Boulevard in Livermore! There are three (3) Water Resources Instrument Control Technician vacancies to be filled. DEFINITION Under general supervision, the Water Resources Instrument Control Technician installs, operates, maintains, calibrates, and repairs computer hardware, process instrumentation, data logging, and telemetry; de-bugs, modifies, and customizes software; modifies, maintains, and repairs all components of a programmable logic controller (PLC) based supervisory control and data acquisition (SCADA) systems/distributed control systems; and performs other duties as assigned. DISTINGUISHING CHARACTERISTICS This classification is distinguished by the specialized, technical assignments in support of SCADA systems, PLC's, distributed control systems, computer networking systems, software and instrumentation, telemetry, lab analytical equipment, safety systems, and other related systems. Incumbents will be expected to work independently in modifying, maintaining, and operating the above referenced systems. SUPERVISION RECEIVED General supervision is provided by a Public Works Supervisor and the WR Coordinator - Electrical & Instrumentation Control. SUPERVISION EXERCISED None. Examples of Important and Essential Functions Technical Functions Installs, calibrates, programs, maintains, and repairs instruments, PLC based system/distributed control system components, meters, analyzers, recorders, control and feed systems, computers, monitors, printers, transducers, microprocessors, and data transmission systems; repairs electronics, electrical, pneumatic, mechanical, and hydraulic systems; maintains and repairs laboratory and safety equipment including gas detection, alarm systems, pH and DO meters; analyzes software problems; modifies computer programs to optimize plant operations and operator convenience; analyzes problems and repairs equipment to component level; analyzes problems and repairs 480 volt alternating current (AC) motor control centers; installs and configures security systems including access control and video system; performs service and maintenance work on a variety of electrical installations, systems, pumps, meters, and other equipment in City facilities; operates diagnostic instruments such as a voltmeter, megger, ammeter, ohmmeter, transistor checker, loop meter, and other electrical test equipment installs and repairs; replaces outlets, lighting fixtures, switches, ballasts, conduit runs and distribution panels; assists in planning and scheduling preventative maintenance programs; develops and implements emergency situation plans; performs all tasks in a safe manner observing all safety practices in performance of assigned duties; trains others in the operation of new or modified computer/instrumentation systems; and upgrades existing systems as needed. Administrative Functions Assists system users in solving data and systems problems and suggests alternative methods of operation; maintains accurate records and updates shop drawings, schematics, and wiring diagrams as changes are made; maintains an inventory of parts, materials, supplies, and equipment used in everyday tasks; ensures that work orders are completed in a timely manner; provides information for budget preparation; may provide direction to temporary employees; and evaluates systems performance and recommends actions to be taken. Job Related and Essential Qualifications Demonstrated Knowledge of : Methods, practices, materials, and tools of computer/instrumentation trade; the theory, terminology, operations, equipment, and principles of electronics including practices, techniques, and tools used in the installation and maintenance and repair of electrical or electronic systems; electrical, pneumatic, instrumentation, computer, PLC, SCADA systems, and distributed control systems as they apply to wastewater treatment plant systems; applicable programming languages; computer operating systems; Electrical Safety Orders of the Division of Industrial Safety, California Code, and the National Electric Code; effective communication techniques; and federal, state, county, and local regulations and safety practices. Demonstrated Skills to : Install, program, maintain, modify, and repair computer hardware, software, PLC, and SCADA/distributed control system components; install, calibrate, maintain, and repair process instrumentation, telemetry, communication systems, and other related equipment; maintain, calibrate, and repair laboratory and safety equipment, gas detecting and alarm systems; diagnose and repair motor control systems; interpret, use, and update technical manuals, blueprints, and schematics; keep accurate, up-to-date records and prepare reports; work independently with minimal supervision; maintain parts and equipment inventory; communicate clearly and concisely, both verbally and in writing; relate effectively to those contacted in the course of work; practice safe work methods when using hand tools, test equipment, and other related equipment; understand and work from oral and written instructions as well as procedural manuals; exercise initiative and creativity in performing assigned duties; and exemplify an enthusiastic, resourceful, cooperative, and effective customer service attitude with the public, co-workers, and others contacted in the course of the work. Ability to : Effectively apply the knowledge and skills necessary for this position; and learn the systems, procedures, practices, and operations of the treatment facility and have a proactive approach to continually improve all assigned areas of responsibility. Additional Information Experience, Education, and Training Guidelines Any combination of experience, education, and training that would provide the best qualified candidates. A typical way to obtain the knowledge, skills, and abilities would be: Experience : Three years of progressively responsible experience in a wastewater treatment facility or related industrial facility, including experience maintaining and operating computer and other electronic systems. Education : Vocational/technical school certificate or an Associate degree with course work in computer science, electronics, or process control/instrumentation is desirable. Training : Any recent training such as academic courses and certification programs, which are relevant to this job classification. Certification : Possession of a California Water Environment Association (CWEA) Plant Maintenance Technologist I certification is required prior to the completion of the probationary period. Possession of a CWEA Electrical/Instrumentation Technologist Grade II certification is required within 3 years of employment. License : Possession of a valid California driver's license and a satisfactory driving record as determined by the City. Requires possession of a valid California Class A license with the appropriate endorsements prior to the completion of the probationary period. Department of Transportation (D.O.T.) Requirement : Incumbents in this job classification may be called upon, at any time, to perform safety sensitive functions, and therefore, may be subject to the Federal Highway Administration D.O.T. regulations and the City's policy concerning drug and alcohol testing as a continuing condition of employment with the City of Livermore. Other Requirements : Must be willing and able to work scheduled and emergency overtime and be available on call as required; work under adverse conditions, such as in confined and awkward spaces, in the presence of noxious odors, toxic chemicals, biological agents, and sewage; work in potentially hazardous areas; work outdoors in all weather conditions; wear and use appropriate safety clothing and equipment, including self-contained breathing devices; and travel to and attend meetings, seminars, training schools, conferences, and workshops during work and non-work hours. Special Requirements : Essential duties require the mental and/or physical ability to read fine print and fine details with no color deficiencies; drive a motor vehicle; converse on the telephone and in person and be clearly understood; detect noises in electronic equipment; operate a computer keyboard and other electronic equipment necessary for this position; manipulate small parts and components; strength to safely lift and maneuver equipment and tools weighing up to 50 pounds; and bend, stretch, reach, stoop, and climb flights of stairs for prolonged periods of time and/or numerous times each day. CITY OF LIVERMORE BENEFITS SUMMARY Association of Livermore Employees Please click here for a copy of the current Memorandum of Understanding (MOU) for the Association of Livermore Employees. The information contained here is a summary of benefits. For a more detailed summary of benefits for all employee groups, click here . Any errors or omissions do not constitute either an expressed or implied contract. Updated 1/2024 MOU TERM 10/01/2021 - 09/30/2025 SCHEDULED INCREASES 10/11/2021 2.0% + $725.40/year 10/10/2022 3.5% + $754.56/year 10/09/2023 2.5% + $777.36/year 10/07/2024 2.0% + $796.80/year CAFETERIA PLAN (MEDICAL, DENTAL & VISION) $1,950/month towards medical, dental, and vision; unused balance paid in cash to employee. BASIC LIFE INSURANCE& ACCIDENTAL DEATH & DISMEMBERMENT INSURANCE (AD & D) FT - $60,000 EE coverage or PT - $30,000 EE coverage, ER paid $1,000 dependent coverage, ER paid EE option to purchase $25,000 additional life insurance& supplemental life to $500,000 (not to exceed 5x annual earnings). LONG TERM DISABILITY (LTD) ER paid 60% of base monthly earnings to $5,000/month max. (180 day waiting period) PERS New City of Livermore EEs are enrolled in the 2% at 60 formula or 2% at 62 formula, depending on eligibility, as per AB 340. Classic PERS Misc Member - 2% at 60 Member Rate = 7% EE paid Employer Rate = 34.43%ER paid (includes unfunded liability; FY23/24) 36 consecutive months Final Comp Sick Leave Credit 4th Level 59 Survivor Ben. Military Service Credit New PERS Misc Member - 2% at 62 Member Rate = 7.5% EE paid Employer Rate = 34.43%ER paid (includes unfunded liability; FY23/24) 36 consecutive months Final Comp Sick Leave Credit 4th Level 59 Survivor Ben. Military Service Credit MEDICARE (Hired after 3/31/86) EE paid 1.45% ER paid 1.45% RETIREMENT HEALTH SAVINGS (RHS) ER contribution of 4% of base pay into RHS account. VACATION ACCRUAL Years of ServiceTotal Accrual Per Year 180.6 hrs 2-5120.12 hrs 6-10135.98 hrs 11-15160.94 hrs 16-19180.18 hrs 20+192.4 hrs Prorated for part-time EE. Maximum accrual: 340 hours HOLIDAYS & HOLIDAY-IN-LIEU PAY Holidays: 12 observed holidays or in lieu day off or if work 2.5 times pay. Holiday-In-Lieu Pay: EE's assigned receive 7.5% of base salary, paid per pay period SICK LEAVE ACCRUAL 96.2 hours/year Pro-rated for part-time EE SICK LEAVE USAGE: FAMILY SICK LEAVE : For immediate Family Illness- ½ Annual Sick Leave Accrual. PARENTAL LEAVE : For non-birthing parentwho becomes a parent due to adoption, foster care placement, or birth of a child- 48 hours BEREAVEMENT/ FUNERAL LEAVE (non-immediate family) : 3 regularly scheduled workdays of sick leavecanbe used foraunt or uncle. FUNERAL LEAVE 3 regularly scheduled workdays max for immediate family. PERSONAL LEAVE Full-Time: 16 hours per year Pro-rated for part-time EE. PREGNANCY LEAVE & FMLA/CFRA EE may use accrued leaves in compliance with City Rules & Regs Benefit provided as per regulations: Federal Family and Medical Leave Act, California Family Rights Act, and California Pregnancy Disability Act DEFERRED COMPENSATION 457(b) ER contributes $75 per pay period, with required matching of $75 by EE 2024 Maximum : Normal = $23,000 Age 50+ = $7,500 Catchup Limits = $46,000 Voluntary EE Participation SECTION 125 PLAN No ER contribution 2024 Maximum Dependent Care*: Up to $5,000/year -- *See IRS Pub #503 Unreimbursed Medical: Up to $3,200/year Pre-tax Health Care Premiums FSA's for Dependent Care Unreimbursed Medical Expenses Other options offered by plan administrator UNIFORM ALLOWANCE $850 per year/ paid in equal amounts per pay period For Public Safety Dispatchers, Senior Public Safety Dispatchers, Supervising Public Safety Dispatchers, Police Clerks, Senior Police Clerk, Supervising Police Clerk, Animal Control Officers, Police Identification Technician, Supervising Property and Evidence Specialist, Property and Evidence Specialist, Community Service Specialists, Crime & Intelligence Analysts, and Crime Prevention Specialist. SAFETY SHOE ALLOWANCE Paid annually in July: $200/year for Meter Readers, and employees in Engineering Technician, Neighborhood Preservation Officer, and Building Inspector series who perform field work, and Public Works employees that are required to wear safety shoes or boots. PRESCRIPTION SAFETY GLASSES Reimbursement of up to $150/year for purchase of safety prescription glasses for EEs working in locations where there is a risk of eye injuries. SHIFT DIFFERENTIAL EEs regularly assigned to city facilities operating 24/7 - $2.50/hour for all hours worked when assigned to a shift requiring EE work at least 4 hours between 4:00 p.m.- 6:00 a.m. EQUIPMENT OPERATION Public Works EEs: $12.00/day for EE who operates Class A vehicle, min of 50%+ operation/day. STANDBY PAY 2 hours straight-time for standby on regularly scheduled work day 3 hours straight-time for standby on regularly scheduled days off and fixed City holidays CALL BACK PAY 3 hours min @ OT rate for FLSA nonexempt. First 3 hours can't be taken as comp time but paid to EE. WORK IN A HIGHER CLASS If work min of 3 consecutive workdays, paid @ 5% differential or the minimum of the salary range of the higher classification. COURT PAY/COURT CANCELLATION PAY If in connection with EE's usual official duties, 3 hrs min @ OT, or 4 hrs min @ OT for those required to appear on normal day off or on graveyard shift. SUPPORT SERVICES TRAINING OFFICER PAY $90/pay period for full pay period while assigned. BILINGUAL PAY $60/pay period for both written & conversational. Must be certified by Department Head and approved by Admin Services Director, and used on the job. $35/pay period for conversation level as certified by Department Head and approved by Admin Services Director. TELEPHONE PAY 20 minutes and for each minute exceeding 20 minutes at OT rate. CELL PHONE ALLOWANCE Standard = $40/month (if authorized) See Administrative Regulation 36 for details. COMMERCIAL DRIVERS' LICENSE PAY $35/pay period with valid CA Commercial Driver's License and valid DOT medical card. OT COMP & COMP TIME OFF OT for > 40 hrs/week or > 8 hrs/day in a reg scheduled day or hrs in excess of those normally scheduled & worked/day @ 1 ½ x reg. pay or Comp Time in lieu of OT for FLSA nonexempt. Accrued Comp Time in excess of 100 hours must be paid out. TUITION REIMBURSEMENT 75% reimbursement fortuition & books For undergraduate studies, $4,000 FY max; $16,000 lifetime max For graduate studies, $5,000 FY max; $10,000 lifetime max LICENSES & CERTIFICATIONS 100% reimbursement for required licenses and certifications EMPLOYEE ASSISTANCE PROGRAM Three (3) sessions per incident per family member. Unlimited telephonic consultations. FLSA WORK PERIOD 168 hour pay period beginning Monday at 12:01 a.m., ending 7 days later on Sunday at 12:00 midnight. If an EE is not on this work week schedule, something must be in writing documenting EE's work week. For WR Operator series : 168 hour period beginning Sunday at 12:00 midnight, ending 7 days later on Saturday at 11:59 p.m. PAY PERIODS 26 pay periods per year Benefits listed are for regular full-time employees. Benefits are prorated for 30-hour and 20-hour employees. ER = Employer EE = Employee FT = Full-Time PT = Part-Time Closing Date/Time: Continuous
PLACER COUNTY, CA
Auburn, California, United States
Introduction Living in Placer County from Placer County Video Portal Placer County is comprised of over 1,400 square miles of beautiful and diverse geography, ranging from the residential and commercial areas of South Placer, through the historic foothill areas of Auburn, Foresthill, and Colfax, and to the County's jewel of the North Lake Tahoe basin. Placer is a great place to live, work, play, and learn! For more information about Placer County, please visit www.placer.ca.gov . POSITION INFORMATION Placer County is accepting applications for Engineering Technician I and Engineering Technician II for the Department of Public Works and for the Community Development Resource Agency . Each level in this job series has different minimum qualifications. To be considered for the I level, the II level, or both levels, you must complete and submit separate applications and supplemental questionnaires for each recruitment: Engineering Technician I #2024-15573-01 Engineering Technician II #2024-15576-01 The eligible lists established as a result of these recruitments may be used to fill permanent full time, permanent part time, and temporary/extra help vacancies as they arise, subject to position-specific requirements. *This classification is scheduled to receive a general wage increase of 4.0% in June 2024. BENEFITS Placer County offers a comprehensive benefits package to employees. The following information represents benefits currently available to permanent Placer County employees and may be subject to change. Applicants should inquire as to the most current benefit package during hiring interviews or by contacting the Human Resources Department. Click here to view Placer Public Employees Organization (PPEO) benefits . For more information regarding the benefits Placer County has to offer, please visit Placer County's Human Resources website. DEFINITION To perform a variety of sub-professional field and office engineering, architectural support services, building system engineering and construction project management work, including construction and drainage inspection, plan checking, contract administration, project monitoring, materials testing, surveying, encroachment permitting, traffic engineering, and transportation planning; to ensure compliance with various laws, regulations, and standards relative to public works projects; and to provide information and assistance to the public in person, by telephone, or in the field. DISTINGUISHING CHARACTERISTICS This is the full journey level class within the Engineering Technician series. This class is distinguished from the Engineering Technician I by the assignment of the full range of duties. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise and are fully aware of the operating procedures and policies within the work unit. Positions in this class are flexibly staffed and are normally filled by advancement from the entry level. SUPERVISION RECEIVED AND EXERCISED Receives general supervision from professional engineering staff and may receive technical and functional supervision from higher level technical staff. EXAMPLES OF ESSENTIAL DUTIES Duties may include, but are not limited to, the following: Perform support to project management, technical administration and construction inspection of public works and capital improvements projects performed either by County contract or through private contracts; review and make recommendations regarding contract compliance; maintain and prepare project records, change orders, submittals, and all required records and reports. Compute and check tentative and final subdivision maps, survey maps and other engineering documents; assist in review of minor land division applications; review grading and drainage plans; assist in the preparation of designs, plans, and specifications for construction, alteration and maintenance of public works projects; and verify cost estimates and right-of-way. Maintain a variety of project records and files including payments, and labor and equipment usage; prepare and submit progress reports and initiate and process progress payments; perform routine engineering computations and assist in verifying compliance with contract and technical requirements; recommend revisions as appropriate. Interpret maps and apply regulatory data in preparing flood zone determinations; investigate drainage and grading complaints; document code enforcement activities and issue permits. Collect and prepare various construction samples for testing; perform tests in the field and laboratory and perform inspections to determine compliance with construction documents; compile and analyze test data and prepare reports. Perform field surveying duties; determine lines, bearings, elevations, distances, grades, and cross sections; set slope and grade stakes; maintain field notes and perform mathematical calculations as necessary; make field sketches and drawings; maintain survey instruments; may act as survey chief as required. Determine, coordinate, investigate and enforce encroachment permit conditions; perform inspections to ensure against encroachment without permit; issue permits, including permits for extra legal loads; design permits as required for special or one-time situations; and may collect fees and cash deposits. Provide engineering support for projects in the areas of right-of-way research and location, drainage and design, and assist in contacting private property owners in conjunction with these projects. Provide support to professional staff for projects in the areas of building systems, including mechanical, electrical, plumbing, fire/life safety systems, low voltage security and alarms, building automation systems, energy efficiency and conservation and related fields. Under supervision, prepare Computer Aided Design (CAD) or Building Information Modeling (BIM) scale drawings such as floor plans, elevations and sections; prepare project cost estimates and materials lists; obtain samples and catalogs from product manufacturers. Assist in conducting traffic counts and speed studies; assist in review of road safety problems and analysis of accident sites; provide assistance to traffic sign and striping crews in designing layouts and sign placements. Under supervision, assist in conducting energy consumption analyses, assist in building systems assessments and preparation of reports including life cycle cost analyses, maintenance and operations of building systems and computer-based facility and project management software. Assist in calculating traffic generation and distribution resulting from projected development activities in accordance with the County General Plan and Zoning Ordinance; assist in the construction and calibration of traffic models and estimate future traffic demands; assist in determining anticipated road network improvements, including use of computer models; prepare project schedules, project budgets, computer-based project management and cost estimates for improvement projects; assist in the preparation of financing plans including cost analyses, fee programs, and implementation ordinances. Explain laws, regulations and requirements to the public; establish and maintain records and record keeping systems; prepare documentation, correspondence, and reports; file mandated periodic reports; perform drafting tasks as required; calculate various fees; and maintain up-to-date databases and accounting records. Build and maintain positive working relationships with co-workers, other County employees and the public using principles of good customer service. Perform related duties as assigned. MINIMUM QUALIFICATIONS It is the responsibility of applicants to identify in their application materials how they meet the minimum qualifications listed below. Experience: Two years of responsible sub-professional engineering experience performing duties similar to an Engineering Technician I with Placer County. Training: Equivalent to an Associate's degree from an accredited college with major course work in engineering technology, architectural design, construction management, project management related to engineering, architecture or construction, or a related field. Note: Relevant, equivalent experience (performing the same or similar job requiring similar knowledge, skills, and abilities) may be substituted for the required education as determined by the Human Resources Department. Applicants receiving their degree outside the United States must submit proof of accreditation by a recognized evaluation agency. Required License or Certificate: When assigned to materials testing duties, possession of certification for use of a nuclear gage; when assigned to State or Federally funded projects, possession of certification to perform required tests. May need to possess a valid driver’s license as required by the position and in accordance with California Vehicle Code. Proof of adequate vehicle insurance and medical clearance may also be required. KNOWLEDGE, SKILLS, AND ABILITIES Knowledge of: Principles and practices of engineering, architectural design and/or construction project management as applied to the planning, design, construction, and maintenance of public works projects. Basic surveying principles and equipment, depending on assignment. Basic principles and practices of drafting, Computer Aided Design (CAD) and Building Information Modeling (BIM), depending on assignment. Mathematics, including algebra, geometry and trigonometry. Computer software including word processing, spread sheet, database, project scheduling and project management applications. Record keeping techniques for maintaining technical and accounting data. Basic methods and materials used in building construction with an emphasis on commercial applications, depending on assignment. Modern office procedures, methods and computer equipment. Principles and practices of work safety. Pertinent local, State and Federal rules, regulations, laws and codes. Methods of financing and allocating costs for public works improvement projects. Technical traffic engineering and transportation planning principles. Materials testing principles, practices and equipment. Computer software used for technical analysis and modeling applications. Ability to: On a continuous basis, know and understand basic operations, and observe safety rules. Intermittently analyze work papers, reports and special projects; identify and interpret technical and numerical information; observe and problem solve sub-professional engineering activities; identify, locate and operate equipment; understand work assignments; and learn to explain laws, codes, regulations and requirements to individuals less technically knowledgeable. Sit at desk for long periods of time; and stand at counter to answer questions from the public. Intermittently, sit while studying or preparing work papers, making computations, working at computer equipment; walk, stand, bend, squat, climb, kneel and twist while performing field work; perform simple and power grasping, pushing, pulling, and fine manipulation; see and hear sufficiently to communicate by visual and auditory signals while working in the field; regularly lift very heavy weight. Make accurate mathematical calculations and solve mathematical problems related to sub-professional engineering work. Prepare simple detailing and representations; make sketches and drawings of field conditions/installations. Use basic surveying tools and equipment, depending on assignment. Use computer software applications for report writing and record-keeping; learn to use computer software for technical analysis and modeling applications. Work with various cultural and ethnic groups in a tactful and effective manner. Obtain information through interview; effectively handle multiple assignments; work with interruption; and to deal firmly and courteously with the public. Analyze situations quickly and objectively and to determine proper course of action. Drive a light truck and operate a two-way radio; use a camera and basic hand tools. Communicate clearly and concisely, both orally and in writing. Establish and maintain effective working relationships with those contacted in the course of work. Perform a broad range of sub-professional engineering work including construction and drainage inspection, plan checking, project monitoring, materials testing, surveying, encroachment permitting, traffic engineering and/or transportation planning. Understand and interpret maps, plans, specifications and contracts. Apply principles of traffic engineering and transportation planning, depending on assignment. Use materials testing equipment. Use computer software for technical analysis and modeling applications. SELECTION PROCEDURE Training & Experience Rating (100%) Based upon responses to the supplemental questionnaire, the applicant’s education, training, and experience will be evaluated using a pre-determined formula. Scores from this evaluation will determine applicant ranking and placement on the eligible list. CONDITION OF EMPLOYMENT Prior to the date of hire, applicants must undergo a fingerprint test by the Department of Justice, pass a medical examination (which may include a drug screening and possibly a psychological evaluation), sign a constitutional oath, and submit proof of U.S. citizenship or legal right to remain and work in the U.S. For some positions, applicants may also be required to submit proof of age, undergo a background investigation (which may include a voice stress analysis and/or a polygraph), and/or be bonded. Additionally, positions in law enforcement classifications and those supporting law enforcement functions will be required to complete a conviction history questionnaire prior to or during the interview process. Applicants for positions with access to Medi-Cal billing software or who are licensed providers must clear the Federal Exclusion List, credentialing, and social security verification. Failure to clear these requirements may result in an employment offer being withdrawn. SUBSTITUTE LISTS The eligible list resulting from this recruitment may be certified as a substitute list for a substantially similar classification. For this purpose, a substantially similar classification is one at a lower level in the same classification (example: entry level vs. journey level) and/or a similar classification (similar work performed, similar training and experience qualifications required). If you are contacted for an interview by a County department, you will be informed of the classification and other relevant information. If you choose not to interview for a substantially similar classification, you will remain on the eligible list for which you originally applied. EMPLOYEES OF OTHER PUBLIC AGENCIES Placer County offers an expedited process for qualifying certain applicants for interviews. Candidates currently employed, or employed within the last year, by a public agency operating under a personnel civil service or merit system may be eligible to be placed on a Public Agency Eligible List and certified as eligible for appointment to a similar job assignment without going through the examination process. For more information on the Public Agency Eligible List, to download forms, or to apply, please click here . EQUAL OPPORTUNITY EMPLOYER Thank you for your interest in employment with Placer County. Placer County is an equal opportunity employer and is committed to an active nondiscrimination program. It is the stated policy of Placer County that harassment, discrimination, and retaliation are prohibited and that all employees, applicants, agents, contractors, and interns/volunteers shall receive equal consideration and treatment. All terms and conditions of employment, including but not limited to recruitment, hiring, transfer, and promotion will be based on the qualifications of the individual for the positions being filled regardless of gender (including gender identity and expression), sexual orientation, race (including traits historically associated with race, including, but not limited to, hair texture and protective hairstyles such as braids, locks, and twists), color, ancestry, religion (including creed and belief), national origin, citizenship, physical disability (including HIV and AIDS), mental disability, medical condition (including cancer or genetic characteristics/information), age (40 or over), marital status, military and/or veteran status, sex (including parental status, pregnancy, childbirth, breastfeeding, and related medical conditions), reproductive health decision making, political orientation, or any other classification protected by federal, state, or local law. Please contact the Human Resources Department at least 5 working days before a scheduled examination if you require accommodation in the examination process. Medical disability verification may be required prior to accommodation. Conclusion For questions regarding this recruitment, please contact Kristen Cannon, Administrative Technician, at kcannon@placer.ca.gov or (530) 886-4661. Closing Date/Time: 6/28/2024 5:00:00 PM
Jun 08, 2024
Full Time
Introduction Living in Placer County from Placer County Video Portal Placer County is comprised of over 1,400 square miles of beautiful and diverse geography, ranging from the residential and commercial areas of South Placer, through the historic foothill areas of Auburn, Foresthill, and Colfax, and to the County's jewel of the North Lake Tahoe basin. Placer is a great place to live, work, play, and learn! For more information about Placer County, please visit www.placer.ca.gov . POSITION INFORMATION Placer County is accepting applications for Engineering Technician I and Engineering Technician II for the Department of Public Works and for the Community Development Resource Agency . Each level in this job series has different minimum qualifications. To be considered for the I level, the II level, or both levels, you must complete and submit separate applications and supplemental questionnaires for each recruitment: Engineering Technician I #2024-15573-01 Engineering Technician II #2024-15576-01 The eligible lists established as a result of these recruitments may be used to fill permanent full time, permanent part time, and temporary/extra help vacancies as they arise, subject to position-specific requirements. *This classification is scheduled to receive a general wage increase of 4.0% in June 2024. BENEFITS Placer County offers a comprehensive benefits package to employees. The following information represents benefits currently available to permanent Placer County employees and may be subject to change. Applicants should inquire as to the most current benefit package during hiring interviews or by contacting the Human Resources Department. Click here to view Placer Public Employees Organization (PPEO) benefits . For more information regarding the benefits Placer County has to offer, please visit Placer County's Human Resources website. DEFINITION To perform a variety of sub-professional field and office engineering, architectural support services, building system engineering and construction project management work, including construction and drainage inspection, plan checking, contract administration, project monitoring, materials testing, surveying, encroachment permitting, traffic engineering, and transportation planning; to ensure compliance with various laws, regulations, and standards relative to public works projects; and to provide information and assistance to the public in person, by telephone, or in the field. DISTINGUISHING CHARACTERISTICS This is the full journey level class within the Engineering Technician series. This class is distinguished from the Engineering Technician I by the assignment of the full range of duties. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise and are fully aware of the operating procedures and policies within the work unit. Positions in this class are flexibly staffed and are normally filled by advancement from the entry level. SUPERVISION RECEIVED AND EXERCISED Receives general supervision from professional engineering staff and may receive technical and functional supervision from higher level technical staff. EXAMPLES OF ESSENTIAL DUTIES Duties may include, but are not limited to, the following: Perform support to project management, technical administration and construction inspection of public works and capital improvements projects performed either by County contract or through private contracts; review and make recommendations regarding contract compliance; maintain and prepare project records, change orders, submittals, and all required records and reports. Compute and check tentative and final subdivision maps, survey maps and other engineering documents; assist in review of minor land division applications; review grading and drainage plans; assist in the preparation of designs, plans, and specifications for construction, alteration and maintenance of public works projects; and verify cost estimates and right-of-way. Maintain a variety of project records and files including payments, and labor and equipment usage; prepare and submit progress reports and initiate and process progress payments; perform routine engineering computations and assist in verifying compliance with contract and technical requirements; recommend revisions as appropriate. Interpret maps and apply regulatory data in preparing flood zone determinations; investigate drainage and grading complaints; document code enforcement activities and issue permits. Collect and prepare various construction samples for testing; perform tests in the field and laboratory and perform inspections to determine compliance with construction documents; compile and analyze test data and prepare reports. Perform field surveying duties; determine lines, bearings, elevations, distances, grades, and cross sections; set slope and grade stakes; maintain field notes and perform mathematical calculations as necessary; make field sketches and drawings; maintain survey instruments; may act as survey chief as required. Determine, coordinate, investigate and enforce encroachment permit conditions; perform inspections to ensure against encroachment without permit; issue permits, including permits for extra legal loads; design permits as required for special or one-time situations; and may collect fees and cash deposits. Provide engineering support for projects in the areas of right-of-way research and location, drainage and design, and assist in contacting private property owners in conjunction with these projects. Provide support to professional staff for projects in the areas of building systems, including mechanical, electrical, plumbing, fire/life safety systems, low voltage security and alarms, building automation systems, energy efficiency and conservation and related fields. Under supervision, prepare Computer Aided Design (CAD) or Building Information Modeling (BIM) scale drawings such as floor plans, elevations and sections; prepare project cost estimates and materials lists; obtain samples and catalogs from product manufacturers. Assist in conducting traffic counts and speed studies; assist in review of road safety problems and analysis of accident sites; provide assistance to traffic sign and striping crews in designing layouts and sign placements. Under supervision, assist in conducting energy consumption analyses, assist in building systems assessments and preparation of reports including life cycle cost analyses, maintenance and operations of building systems and computer-based facility and project management software. Assist in calculating traffic generation and distribution resulting from projected development activities in accordance with the County General Plan and Zoning Ordinance; assist in the construction and calibration of traffic models and estimate future traffic demands; assist in determining anticipated road network improvements, including use of computer models; prepare project schedules, project budgets, computer-based project management and cost estimates for improvement projects; assist in the preparation of financing plans including cost analyses, fee programs, and implementation ordinances. Explain laws, regulations and requirements to the public; establish and maintain records and record keeping systems; prepare documentation, correspondence, and reports; file mandated periodic reports; perform drafting tasks as required; calculate various fees; and maintain up-to-date databases and accounting records. Build and maintain positive working relationships with co-workers, other County employees and the public using principles of good customer service. Perform related duties as assigned. MINIMUM QUALIFICATIONS It is the responsibility of applicants to identify in their application materials how they meet the minimum qualifications listed below. Experience: Two years of responsible sub-professional engineering experience performing duties similar to an Engineering Technician I with Placer County. Training: Equivalent to an Associate's degree from an accredited college with major course work in engineering technology, architectural design, construction management, project management related to engineering, architecture or construction, or a related field. Note: Relevant, equivalent experience (performing the same or similar job requiring similar knowledge, skills, and abilities) may be substituted for the required education as determined by the Human Resources Department. Applicants receiving their degree outside the United States must submit proof of accreditation by a recognized evaluation agency. Required License or Certificate: When assigned to materials testing duties, possession of certification for use of a nuclear gage; when assigned to State or Federally funded projects, possession of certification to perform required tests. May need to possess a valid driver’s license as required by the position and in accordance with California Vehicle Code. Proof of adequate vehicle insurance and medical clearance may also be required. KNOWLEDGE, SKILLS, AND ABILITIES Knowledge of: Principles and practices of engineering, architectural design and/or construction project management as applied to the planning, design, construction, and maintenance of public works projects. Basic surveying principles and equipment, depending on assignment. Basic principles and practices of drafting, Computer Aided Design (CAD) and Building Information Modeling (BIM), depending on assignment. Mathematics, including algebra, geometry and trigonometry. Computer software including word processing, spread sheet, database, project scheduling and project management applications. Record keeping techniques for maintaining technical and accounting data. Basic methods and materials used in building construction with an emphasis on commercial applications, depending on assignment. Modern office procedures, methods and computer equipment. Principles and practices of work safety. Pertinent local, State and Federal rules, regulations, laws and codes. Methods of financing and allocating costs for public works improvement projects. Technical traffic engineering and transportation planning principles. Materials testing principles, practices and equipment. Computer software used for technical analysis and modeling applications. Ability to: On a continuous basis, know and understand basic operations, and observe safety rules. Intermittently analyze work papers, reports and special projects; identify and interpret technical and numerical information; observe and problem solve sub-professional engineering activities; identify, locate and operate equipment; understand work assignments; and learn to explain laws, codes, regulations and requirements to individuals less technically knowledgeable. Sit at desk for long periods of time; and stand at counter to answer questions from the public. Intermittently, sit while studying or preparing work papers, making computations, working at computer equipment; walk, stand, bend, squat, climb, kneel and twist while performing field work; perform simple and power grasping, pushing, pulling, and fine manipulation; see and hear sufficiently to communicate by visual and auditory signals while working in the field; regularly lift very heavy weight. Make accurate mathematical calculations and solve mathematical problems related to sub-professional engineering work. Prepare simple detailing and representations; make sketches and drawings of field conditions/installations. Use basic surveying tools and equipment, depending on assignment. Use computer software applications for report writing and record-keeping; learn to use computer software for technical analysis and modeling applications. Work with various cultural and ethnic groups in a tactful and effective manner. Obtain information through interview; effectively handle multiple assignments; work with interruption; and to deal firmly and courteously with the public. Analyze situations quickly and objectively and to determine proper course of action. Drive a light truck and operate a two-way radio; use a camera and basic hand tools. Communicate clearly and concisely, both orally and in writing. Establish and maintain effective working relationships with those contacted in the course of work. Perform a broad range of sub-professional engineering work including construction and drainage inspection, plan checking, project monitoring, materials testing, surveying, encroachment permitting, traffic engineering and/or transportation planning. Understand and interpret maps, plans, specifications and contracts. Apply principles of traffic engineering and transportation planning, depending on assignment. Use materials testing equipment. Use computer software for technical analysis and modeling applications. SELECTION PROCEDURE Training & Experience Rating (100%) Based upon responses to the supplemental questionnaire, the applicant’s education, training, and experience will be evaluated using a pre-determined formula. Scores from this evaluation will determine applicant ranking and placement on the eligible list. CONDITION OF EMPLOYMENT Prior to the date of hire, applicants must undergo a fingerprint test by the Department of Justice, pass a medical examination (which may include a drug screening and possibly a psychological evaluation), sign a constitutional oath, and submit proof of U.S. citizenship or legal right to remain and work in the U.S. For some positions, applicants may also be required to submit proof of age, undergo a background investigation (which may include a voice stress analysis and/or a polygraph), and/or be bonded. Additionally, positions in law enforcement classifications and those supporting law enforcement functions will be required to complete a conviction history questionnaire prior to or during the interview process. Applicants for positions with access to Medi-Cal billing software or who are licensed providers must clear the Federal Exclusion List, credentialing, and social security verification. Failure to clear these requirements may result in an employment offer being withdrawn. SUBSTITUTE LISTS The eligible list resulting from this recruitment may be certified as a substitute list for a substantially similar classification. For this purpose, a substantially similar classification is one at a lower level in the same classification (example: entry level vs. journey level) and/or a similar classification (similar work performed, similar training and experience qualifications required). If you are contacted for an interview by a County department, you will be informed of the classification and other relevant information. If you choose not to interview for a substantially similar classification, you will remain on the eligible list for which you originally applied. EMPLOYEES OF OTHER PUBLIC AGENCIES Placer County offers an expedited process for qualifying certain applicants for interviews. Candidates currently employed, or employed within the last year, by a public agency operating under a personnel civil service or merit system may be eligible to be placed on a Public Agency Eligible List and certified as eligible for appointment to a similar job assignment without going through the examination process. For more information on the Public Agency Eligible List, to download forms, or to apply, please click here . EQUAL OPPORTUNITY EMPLOYER Thank you for your interest in employment with Placer County. Placer County is an equal opportunity employer and is committed to an active nondiscrimination program. It is the stated policy of Placer County that harassment, discrimination, and retaliation are prohibited and that all employees, applicants, agents, contractors, and interns/volunteers shall receive equal consideration and treatment. All terms and conditions of employment, including but not limited to recruitment, hiring, transfer, and promotion will be based on the qualifications of the individual for the positions being filled regardless of gender (including gender identity and expression), sexual orientation, race (including traits historically associated with race, including, but not limited to, hair texture and protective hairstyles such as braids, locks, and twists), color, ancestry, religion (including creed and belief), national origin, citizenship, physical disability (including HIV and AIDS), mental disability, medical condition (including cancer or genetic characteristics/information), age (40 or over), marital status, military and/or veteran status, sex (including parental status, pregnancy, childbirth, breastfeeding, and related medical conditions), reproductive health decision making, political orientation, or any other classification protected by federal, state, or local law. Please contact the Human Resources Department at least 5 working days before a scheduled examination if you require accommodation in the examination process. Medical disability verification may be required prior to accommodation. Conclusion For questions regarding this recruitment, please contact Kristen Cannon, Administrative Technician, at kcannon@placer.ca.gov or (530) 886-4661. Closing Date/Time: 6/28/2024 5:00:00 PM
Description The Correction Facility Technician II performs skilled work in the maintenance and repair of the Sheriff's Department, Detention Center, and jail facilities. Work involves the maintenance and repair of mechanical and electrical equipment, including jail security systems. This position performs a variety of maintenance and repair tasks, requiring a thorough knowledge of building trade skills. This employee is responsible for performing skilled work in one or more building trades, such as electrical, plumbing, and/or heating and air conditioning equipment. Work also involves supervising activities of inmate trustees assigned to work projects. Examples of Duties Performs skilled maintenance work on mechanical and technical security systems, including security locks and doors, surveillance systems, fire alarms and smoke exhaust systems, life safety equipment, etc. Performs maintenance work on heating and air conditioning systems, checking thermostats, couplers, fuses, belts, motors, etc. Assists in major heating and air conditioning repair projects. Performs skilled plumbing tasks including assembling, installing and repairing pipes and fittings, opening clogged drains, troubleshooting problem areas, and repairing toilets and faucets. Performs repairs alterations and maintains building, floors, ceilings, stairways, doors, walls, windows, masonry, furniture, and other law enforcement maintenance areas. Assists in preparing estimates and cost analysis on projects to determine feasibility of completing projects internally or contracting them out to be completed by an external party. Assists in drafting and engineering for repairs. Repairs and maintains electrical and mechanical high security door systems within secure perimeter of the jail. Supervises activities of inmate trustees assigned to work projects, ensuring adherence to established policies, procedures, and standards. Makes inquiries of vendors on delivery dates; purchases small items for repair jobs from vendors; receives materials from vendors. Reviews and inspects contracted work for quality and compliance with appropriate standards. Performs appropriate preventive maintenance per monthly schedule. Performs smoke tests and tests of all Life Safety equipment as required by Texas Commission on Jail Standards. Regular and punctual attendance is required. Performs other related duties as required. Minimum Qualifications High School Diploma or GED and a minimum three years of experience in a related field; or an equivalent combination of education and related experience required. Possession of a current state or local license required for HVAC, plumbing or electrical. Must be a U.S. citizen. Must attain certification by the Texas Commission on Law Enforcement as a Jailer within one (1) year of employment. Possession of a valid driver's license. Must be able to obtain a State of Texas driver's license within 90 days. Supplemental Information To ensure proper delivery of emails please add jobs@dentoncounty.gov to your email safe list. Closing Date/Time: Continuous
Mar 08, 2024
Full Time
Description The Correction Facility Technician II performs skilled work in the maintenance and repair of the Sheriff's Department, Detention Center, and jail facilities. Work involves the maintenance and repair of mechanical and electrical equipment, including jail security systems. This position performs a variety of maintenance and repair tasks, requiring a thorough knowledge of building trade skills. This employee is responsible for performing skilled work in one or more building trades, such as electrical, plumbing, and/or heating and air conditioning equipment. Work also involves supervising activities of inmate trustees assigned to work projects. Examples of Duties Performs skilled maintenance work on mechanical and technical security systems, including security locks and doors, surveillance systems, fire alarms and smoke exhaust systems, life safety equipment, etc. Performs maintenance work on heating and air conditioning systems, checking thermostats, couplers, fuses, belts, motors, etc. Assists in major heating and air conditioning repair projects. Performs skilled plumbing tasks including assembling, installing and repairing pipes and fittings, opening clogged drains, troubleshooting problem areas, and repairing toilets and faucets. Performs repairs alterations and maintains building, floors, ceilings, stairways, doors, walls, windows, masonry, furniture, and other law enforcement maintenance areas. Assists in preparing estimates and cost analysis on projects to determine feasibility of completing projects internally or contracting them out to be completed by an external party. Assists in drafting and engineering for repairs. Repairs and maintains electrical and mechanical high security door systems within secure perimeter of the jail. Supervises activities of inmate trustees assigned to work projects, ensuring adherence to established policies, procedures, and standards. Makes inquiries of vendors on delivery dates; purchases small items for repair jobs from vendors; receives materials from vendors. Reviews and inspects contracted work for quality and compliance with appropriate standards. Performs appropriate preventive maintenance per monthly schedule. Performs smoke tests and tests of all Life Safety equipment as required by Texas Commission on Jail Standards. Regular and punctual attendance is required. Performs other related duties as required. Minimum Qualifications High School Diploma or GED and a minimum three years of experience in a related field; or an equivalent combination of education and related experience required. Possession of a current state or local license required for HVAC, plumbing or electrical. Must be a U.S. citizen. Must attain certification by the Texas Commission on Law Enforcement as a Jailer within one (1) year of employment. Possession of a valid driver's license. Must be able to obtain a State of Texas driver's license within 90 days. Supplemental Information To ensure proper delivery of emails please add jobs@dentoncounty.gov to your email safe list. Closing Date/Time: Continuous
CITY OF SUNNYVALE, CA
Sunnyvale, California, United States
Description THEATER TECHNICIAN (Recreation Technician Job Code: 9328) Hours: Casual non-benefited employees are limited to working no more than twenty-five (25) hours per week and no more than 900 hours in a fiscal year (July 1-June 30). Seasonal non-benefited employees are limited to working no more than six (6) consecutive months and no more than 900 hours in a fiscal year (July 1-June 30). The City of Sunnyvale is seeking qualified, self-motivated, energetic, responsible individuals to join our team at the Sunnyvale Theatre, a state-of-the-art, fully equipped, 200-seat venue. Home to a resident theatre company, the facility is also in demand as a rental venue for smaller performing groups, dance and music school recitals, lectures and film screenings. This position is required to work evenings and weekends. This position will report directly to the Technical Coordinator. Essential Job Functions (May include, but are not limited to, the following): Staffing rentals and City-presented performances on an on-call basis (typical call length is 4 hours) Operating lighting and sound boards during performances Supervising rentals Setting up/striking sound/lighting equipment Working as deck crew Training/supervising volunteer stagehands and house staff as needed Assisting with light building and equipment maintenance Lift up to 50 lbs., climb ladders and occasionally work in high or tight spaces Must attend mandatory theater training Minimum Qualifications Minimum age is 18 years old High School Diploma or GED Technical theatre experience, including lighting and sound board operation at college or professional level One (1) year or one (1) theater season of experience with theatrical lighting, rigging and sound set up and strike at college level or above Licenses/Certifications: Possession and continued maintenance of a valid California Class C driver's license and a safe driving record or the ability to supply alternate transportation as approved by the appointing authority. DESIRABLE QUALIFICATIONS Ability to improvise lighting design/general theatrical lighting experience is a plus Sound engineering expertise (live music, theatre) Bilingual in Spanish, Mandarin or Farsi Experience interacting with the public Ability to follow oral and written instructions Have excellent attention to details and deadlines College courses in theater, music, recreation or related classes Experience with Microsoft Office Suite (Word, Excel, Publisher, PowerPoint, Outlook) Application and Selection Process If you are interested in this opportunity, please submit a completed application and responses to the supplemental questions to the Department of Human Resources. City application forms, completed in full and responses to the supplemental questions are required. Candidates are asked to fully describe any training, education, experience and/or skills relevant to this position. Resumes are not accepted in lieu of the application, please do not indicate "see resume." Electronic applications may be submitted online through the City's employment page; go to Sunnyvale.ca.gov, Search: Jobs. Late or incomplete applications will also not be accepted. Please submit application materials as soon as possible to be considered for this position as this job posting may close without notice. SELECTION PROCESS: Applications competitively screened based on the minimum qualifications of this position. Based upon a review of the application materials, qualified candidate applications will be forwarded to the hiring department for review. Application materials will be evaluated for job-related skills, experience and education. Qualified applicants will be invited to participate in an interview. Applications are reviewed on an ongoing basis and information regarding next steps in the recruitment process will be sent via email. Please check your email regularly for status updates . You may contact Faye Brand at fbrand@sunnyvale.ca.gov or 408-730-3015 for application updates. Any candidate that is selected by the hiring department will be required to successfully complete a pre-employment process, which may consist of a background history check, as well as medical exam(s) administered by a City-selected physician(s) before hire. Prior to starting work, all newly- hired employees will be fingerprinted to check conviction history. A conviction history will not necessarily disqualify an applicant from appointment; however, failure to disclose conviction history will result in refusal of employment or termination. Positions which are covered by the Department of Transportation regulations are required to submit to a pre-employment drug test and to random drug and alcohol testing. ADDITIONAL INFORMATION For more information regarding this employment opportunity, contact Richard Hall, Assistant Recreation Coordinator, at 408-730-7354 or by email to rhall@sunnyvale.ca.gov. For information relating to the application process contact Faye Brand, Human Resources Technician at 408-730-3015 or email: fbrand@sunnyvale.ca.gov . The information contained within this announcement may be modified or revoked without notice and does not constitute either an expressed or implied contract. The City of Sunnyvale is an Equal Opportunity Employer. It is the policy of the City of Sunnyvale not to discriminate against all qualified applicants or employees on the basis of actual or perceived race, religion (including religious dress or grooming practice), color, sex (includes gender, pregnancy, childbirth, medical conditions related to pregnancy or childbirth, breastfeeding or medical conditions related to breastfeeding), gender identity and/or gender expression, sexual orientation (including heterosexuality, homosexuality and bisexuality), ethnic or national origin, ancestry, citizenship status, uniformed service member status, marital status, family relationship, age, cancer or HIV/AIDS related medical condition, genetic characteristics and/or genetic information, and physical or mental disability. Applicants needing special accommodations for testing should submit a request to the Department of Human Resources at time of application. No City benefits are offered with this Temporary Position. Closing Date/Time: Continuous
Mar 08, 2024
Full Time
Description THEATER TECHNICIAN (Recreation Technician Job Code: 9328) Hours: Casual non-benefited employees are limited to working no more than twenty-five (25) hours per week and no more than 900 hours in a fiscal year (July 1-June 30). Seasonal non-benefited employees are limited to working no more than six (6) consecutive months and no more than 900 hours in a fiscal year (July 1-June 30). The City of Sunnyvale is seeking qualified, self-motivated, energetic, responsible individuals to join our team at the Sunnyvale Theatre, a state-of-the-art, fully equipped, 200-seat venue. Home to a resident theatre company, the facility is also in demand as a rental venue for smaller performing groups, dance and music school recitals, lectures and film screenings. This position is required to work evenings and weekends. This position will report directly to the Technical Coordinator. Essential Job Functions (May include, but are not limited to, the following): Staffing rentals and City-presented performances on an on-call basis (typical call length is 4 hours) Operating lighting and sound boards during performances Supervising rentals Setting up/striking sound/lighting equipment Working as deck crew Training/supervising volunteer stagehands and house staff as needed Assisting with light building and equipment maintenance Lift up to 50 lbs., climb ladders and occasionally work in high or tight spaces Must attend mandatory theater training Minimum Qualifications Minimum age is 18 years old High School Diploma or GED Technical theatre experience, including lighting and sound board operation at college or professional level One (1) year or one (1) theater season of experience with theatrical lighting, rigging and sound set up and strike at college level or above Licenses/Certifications: Possession and continued maintenance of a valid California Class C driver's license and a safe driving record or the ability to supply alternate transportation as approved by the appointing authority. DESIRABLE QUALIFICATIONS Ability to improvise lighting design/general theatrical lighting experience is a plus Sound engineering expertise (live music, theatre) Bilingual in Spanish, Mandarin or Farsi Experience interacting with the public Ability to follow oral and written instructions Have excellent attention to details and deadlines College courses in theater, music, recreation or related classes Experience with Microsoft Office Suite (Word, Excel, Publisher, PowerPoint, Outlook) Application and Selection Process If you are interested in this opportunity, please submit a completed application and responses to the supplemental questions to the Department of Human Resources. City application forms, completed in full and responses to the supplemental questions are required. Candidates are asked to fully describe any training, education, experience and/or skills relevant to this position. Resumes are not accepted in lieu of the application, please do not indicate "see resume." Electronic applications may be submitted online through the City's employment page; go to Sunnyvale.ca.gov, Search: Jobs. Late or incomplete applications will also not be accepted. Please submit application materials as soon as possible to be considered for this position as this job posting may close without notice. SELECTION PROCESS: Applications competitively screened based on the minimum qualifications of this position. Based upon a review of the application materials, qualified candidate applications will be forwarded to the hiring department for review. Application materials will be evaluated for job-related skills, experience and education. Qualified applicants will be invited to participate in an interview. Applications are reviewed on an ongoing basis and information regarding next steps in the recruitment process will be sent via email. Please check your email regularly for status updates . You may contact Faye Brand at fbrand@sunnyvale.ca.gov or 408-730-3015 for application updates. Any candidate that is selected by the hiring department will be required to successfully complete a pre-employment process, which may consist of a background history check, as well as medical exam(s) administered by a City-selected physician(s) before hire. Prior to starting work, all newly- hired employees will be fingerprinted to check conviction history. A conviction history will not necessarily disqualify an applicant from appointment; however, failure to disclose conviction history will result in refusal of employment or termination. Positions which are covered by the Department of Transportation regulations are required to submit to a pre-employment drug test and to random drug and alcohol testing. ADDITIONAL INFORMATION For more information regarding this employment opportunity, contact Richard Hall, Assistant Recreation Coordinator, at 408-730-7354 or by email to rhall@sunnyvale.ca.gov. For information relating to the application process contact Faye Brand, Human Resources Technician at 408-730-3015 or email: fbrand@sunnyvale.ca.gov . The information contained within this announcement may be modified or revoked without notice and does not constitute either an expressed or implied contract. The City of Sunnyvale is an Equal Opportunity Employer. It is the policy of the City of Sunnyvale not to discriminate against all qualified applicants or employees on the basis of actual or perceived race, religion (including religious dress or grooming practice), color, sex (includes gender, pregnancy, childbirth, medical conditions related to pregnancy or childbirth, breastfeeding or medical conditions related to breastfeeding), gender identity and/or gender expression, sexual orientation (including heterosexuality, homosexuality and bisexuality), ethnic or national origin, ancestry, citizenship status, uniformed service member status, marital status, family relationship, age, cancer or HIV/AIDS related medical condition, genetic characteristics and/or genetic information, and physical or mental disability. Applicants needing special accommodations for testing should submit a request to the Department of Human Resources at time of application. No City benefits are offered with this Temporary Position. Closing Date/Time: Continuous