San Diego State University
5500 Campanile Drive, San Diego, CA 92182, USA
Position Summary Under general supervision, the Facilities Maintenance Mechanic performs a variety of complex skilled maintenance, repair, and renovation work. The FMM completes all routine work assignments and performs all additional duties as assigned. The FMM also maintains equipment and a safe and clean working environment, consistently meets university needs in a timely and professional manner with increasingly improved skill. The FMM also maintains an accurate attendance record, is punctual and consistently meets deadlines, builds, and maintains internal and external customer satisfaction with the products and services offered by the organization. The incumbent also seeks feedback, is responsive to stakeholders and takes appropriate action for the situation. The FMM must be able to perform strenuous physical work while using mechanical aptitude and motor coordination, implements safety procedures, resolves problems, and improves safety in the workplace. The FMM works to instill in others the importance of workplace safety rules and regulations and takes appropriate actions, conducts hazard assessments, addresses hazards appropriately and applies controls as appropriate to address/mitigate hazards; promptly follows-up with health and safety risks, taking appropriate action(s), and provides necessary reports and documentation. This is a full-time (1.0 time-base), benefits eligible, permanent/probationary position. This position is designated non- exempt under FLSA and is eligible for overtime compensation. Standard SDSU work hours are Monday - Friday, 6:00 a.m. to 2:30 p.m., but may vary based on operational needs. The individual hired into this role will work on campus at SDSU in San Diego. Department Summary SDSU Facilities Services (FS) is a customer-service based organization providing facility maintenance activities through a transparent and deliberate process. It is responsible for the operation, maintenance, repair, renovation, remodel, and alteration activities in support of the academic and research mission of the university. Facilities Services employs approximately 250 employees and supports approximately eight million square feet of buildings (including residence halls and parking structures) and 280 acres of improved and unimproved land. For more information regarding the Facilities department, click here . Education and Experience Knowledge: Work requires thorough knowledge of the methods, materials, equipment and tools used in one skilled trade area; working knowledge of materials, methods, equipment and tools in related trade areas pertaining to facilities, systems, construction and renovation; thorough knowledge of generally accepted trade practices in trade specialty; working knowledge of computerized maintenance and building automation systems; working knowledge of applicable building and safety codes and regulations related to facilities, systems and renovations. Abilities: Must be able to demonstrate journey-level skill in one trade and strong skills in other applicable trades; operate construction and related equipment; use considerable judgment and discretion in performing duties; read, interpret and work from blueprints, plans, drawings, and specifications; make rough sketches; estimate cost, time and materials of maintenance, repair and renovation work; maintain records and retrieve data related to work performed using manual and/or computerized record-keeping systems; prepare standard reports; provide instruction to unskilled and semi-skilled assistants; analyze and respond to emergency situations; read and write at a level appropriate to the position; and perform arithmetic calculations as required by the position. Experience: These abilities normally would be acquired through four years of increasingly responsible experience leading to journey-level skills in a mechanical or facilities/building trade, or any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Licenses and/or Certifications Valid California Driver’s License or have the ability to obtain one within 10 days of hire. Key Qualifications Prior experience at a similar higher education environment, government or a large multi-building facility environment is preferred. Experience using a computerized maintenance management system. Five years of verifiable employment experience performing work in one or more of the following trades Electrical field is preferred; technical trade school certification may substitute for one year of work experience. Compensation and Benefits Starting salary upon appointment is not expected to exceed $6,076 per month. Salary placement is determined by the education, experience, and qualifications the candidate brings to the position, internal equity, and the hiring department’s fiscal resources. San Diego State University offers a rich benefits package that constitutes a major portion of total compensation. For more information regarding SDSU benefits, please click here . CSU Classification Salary Range: $6,076 - $7,766 per month. Diversity and Community at SDSU At SDSU, our diversity gives us power and benefits every single member of our community. Through our commitment to equity and inclusion, we encourage all members of our community to purposefully learn from one another through open and respectful dialogue and responsible engagement. For more information, click here . Principles of Community At San Diego State University, we are a community of diverse individuals who have and represent many perspectives, beliefs and identities. This diversity lends our community strength, and we commit to creating and sustaining an inclusive and intellectually vibrant environment that benefits all members of our university. SDSU’s Principles of Community is an aspirational statement that is intended to evolve over time. The statement reflects the ideals we are encouraged to uphold in our interactions with one another. Supplemental Information Initial review of the required application materials, including cover letters and resumes, will begin on June 26, 2024. To receive full consideration, apply by June 25, 2024. The position will remain open until filled. The person holding this position is considered a ‘mandated reporter’ under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. San Diego State University is not a sponsoring agency for staff or management positions (e.g., H-1B visa). Applicants must currently be authorized to work in the United States on a full-time basis. Offers of employment are contingent upon the presentation of documents that demonstrate a person's identity and authorization to work in the United States, which are consistent with the provisions of the Immigration Reform and Control Act. A background check (including a criminal records check) must be completed satisfactorily and is required for employment. SDSU will make a conditional offer of employment, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current SDSU employee who was conditionally offered the position. SDSU is a smoke-free campus. For more information, please click here . SDSU is an Equal Opportunity Employer that considers all qualified candidates for employment and does not discriminate on the basis of race, religion, color, ancestry, age, disability, genetic information, gender, gender identity, gender expression, marital status, medical condition, national origin, sex, sexual orientation, covered military and veteran status, or any other protected characteristic or status. Reasonable accommodations will be provided for qualified applicants with disabilities who request an accommodation by contacting Michelle Puentes at mpuentes2@sdsu.edu . Advertised: Jun 12 2024 Pacific Daylight Time Applications close: Closing Date/Time:
Jun 13, 2024
Position Summary Under general supervision, the Facilities Maintenance Mechanic performs a variety of complex skilled maintenance, repair, and renovation work. The FMM completes all routine work assignments and performs all additional duties as assigned. The FMM also maintains equipment and a safe and clean working environment, consistently meets university needs in a timely and professional manner with increasingly improved skill. The FMM also maintains an accurate attendance record, is punctual and consistently meets deadlines, builds, and maintains internal and external customer satisfaction with the products and services offered by the organization. The incumbent also seeks feedback, is responsive to stakeholders and takes appropriate action for the situation. The FMM must be able to perform strenuous physical work while using mechanical aptitude and motor coordination, implements safety procedures, resolves problems, and improves safety in the workplace. The FMM works to instill in others the importance of workplace safety rules and regulations and takes appropriate actions, conducts hazard assessments, addresses hazards appropriately and applies controls as appropriate to address/mitigate hazards; promptly follows-up with health and safety risks, taking appropriate action(s), and provides necessary reports and documentation. This is a full-time (1.0 time-base), benefits eligible, permanent/probationary position. This position is designated non- exempt under FLSA and is eligible for overtime compensation. Standard SDSU work hours are Monday - Friday, 6:00 a.m. to 2:30 p.m., but may vary based on operational needs. The individual hired into this role will work on campus at SDSU in San Diego. Department Summary SDSU Facilities Services (FS) is a customer-service based organization providing facility maintenance activities through a transparent and deliberate process. It is responsible for the operation, maintenance, repair, renovation, remodel, and alteration activities in support of the academic and research mission of the university. Facilities Services employs approximately 250 employees and supports approximately eight million square feet of buildings (including residence halls and parking structures) and 280 acres of improved and unimproved land. For more information regarding the Facilities department, click here . Education and Experience Knowledge: Work requires thorough knowledge of the methods, materials, equipment and tools used in one skilled trade area; working knowledge of materials, methods, equipment and tools in related trade areas pertaining to facilities, systems, construction and renovation; thorough knowledge of generally accepted trade practices in trade specialty; working knowledge of computerized maintenance and building automation systems; working knowledge of applicable building and safety codes and regulations related to facilities, systems and renovations. Abilities: Must be able to demonstrate journey-level skill in one trade and strong skills in other applicable trades; operate construction and related equipment; use considerable judgment and discretion in performing duties; read, interpret and work from blueprints, plans, drawings, and specifications; make rough sketches; estimate cost, time and materials of maintenance, repair and renovation work; maintain records and retrieve data related to work performed using manual and/or computerized record-keeping systems; prepare standard reports; provide instruction to unskilled and semi-skilled assistants; analyze and respond to emergency situations; read and write at a level appropriate to the position; and perform arithmetic calculations as required by the position. Experience: These abilities normally would be acquired through four years of increasingly responsible experience leading to journey-level skills in a mechanical or facilities/building trade, or any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Licenses and/or Certifications Valid California Driver’s License or have the ability to obtain one within 10 days of hire. Key Qualifications Prior experience at a similar higher education environment, government or a large multi-building facility environment is preferred. Experience using a computerized maintenance management system. Five years of verifiable employment experience performing work in one or more of the following trades Electrical field is preferred; technical trade school certification may substitute for one year of work experience. Compensation and Benefits Starting salary upon appointment is not expected to exceed $6,076 per month. Salary placement is determined by the education, experience, and qualifications the candidate brings to the position, internal equity, and the hiring department’s fiscal resources. San Diego State University offers a rich benefits package that constitutes a major portion of total compensation. For more information regarding SDSU benefits, please click here . CSU Classification Salary Range: $6,076 - $7,766 per month. Diversity and Community at SDSU At SDSU, our diversity gives us power and benefits every single member of our community. Through our commitment to equity and inclusion, we encourage all members of our community to purposefully learn from one another through open and respectful dialogue and responsible engagement. For more information, click here . Principles of Community At San Diego State University, we are a community of diverse individuals who have and represent many perspectives, beliefs and identities. This diversity lends our community strength, and we commit to creating and sustaining an inclusive and intellectually vibrant environment that benefits all members of our university. SDSU’s Principles of Community is an aspirational statement that is intended to evolve over time. The statement reflects the ideals we are encouraged to uphold in our interactions with one another. Supplemental Information Initial review of the required application materials, including cover letters and resumes, will begin on June 26, 2024. To receive full consideration, apply by June 25, 2024. The position will remain open until filled. The person holding this position is considered a ‘mandated reporter’ under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. San Diego State University is not a sponsoring agency for staff or management positions (e.g., H-1B visa). Applicants must currently be authorized to work in the United States on a full-time basis. Offers of employment are contingent upon the presentation of documents that demonstrate a person's identity and authorization to work in the United States, which are consistent with the provisions of the Immigration Reform and Control Act. A background check (including a criminal records check) must be completed satisfactorily and is required for employment. SDSU will make a conditional offer of employment, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current SDSU employee who was conditionally offered the position. SDSU is a smoke-free campus. For more information, please click here . SDSU is an Equal Opportunity Employer that considers all qualified candidates for employment and does not discriminate on the basis of race, religion, color, ancestry, age, disability, genetic information, gender, gender identity, gender expression, marital status, medical condition, national origin, sex, sexual orientation, covered military and veteran status, or any other protected characteristic or status. Reasonable accommodations will be provided for qualified applicants with disabilities who request an accommodation by contacting Michelle Puentes at mpuentes2@sdsu.edu . Advertised: Jun 12 2024 Pacific Daylight Time Applications close: Closing Date/Time:
Sonoma State University
1801 E Cotati Ave, Rohnert Park, California, USA
Application Process This position is open until filled. For full consideration, please submit application, along with cover letter and resume, by 8am on Tuesday, April 2, 2024. In your cover letter, please share why you want to work for Facilities Management and how your work experience is relevant to this position. Please review the position description listed above for full scope of responsibilities and qualifications. Evidence of degree(s) or certificate(s) and/or license(s) required at time of hire. Job Summary Available work schedule: Monday through Friday, 8:00 a.m. - 4:30 p.m. Reporting to the Housing Operations Manager, with additional lead work direction provided from other members of the Facilities Management team, the Maintenance Mechanic is responsible for all maintenance needs and work requests for student housing and any other structures or buildings operated by Sonoma State University. The incumbent independently performs a variety of skilled preventive and general maintenance, repair, construction, and renovation work on facilities and systems, including routine maintenance, repairs from normal wear and use, and vandalism. Key Qualifications This position requires four years of increasingly responsible experience leading to journey-level skills in a mechanical or facility/building trade, or any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Beginning proficiency with computers and Microsoft Office (Word, Excel) required. Knowledge of Google Suite, computerized work control system, building automation systems; and PeopleSoft preferred. The incumbent must successfully complete a pre-placement exam and must possess and maintain a California Driver’s License valid for the operation of any vehicle or equipment required to maintain and operate. Salary and Benefits Starting salary placement depends on qualifications and experience and will not exceed $6,076 a month. This is a full time, non-exempt position, which will lead toward permanent status following the successful completion of a probationary period. This position is eligible for a broad range of benefits, including medical, dental, vision, life and disability insurances, retirement (CalPERS), tuition waiver, vacation and sick leave. In addition, 15 paid holidays are offered each year. Sonoma State University is also a Public Service Loan Forgiveness Program (PSLF) Employer. A comprehensive benefits summary for this position is available online by clicking here to be taken to the CSU benefits page. Supplemental Information Sonoma State University is committed to achieving excellence through teaching, scholarship, learning and inclusion. In line with our Strategic Plan and our Seawolf Commitment, our values include diversity, sustainability, community engagement, respect, responsibility, excellence and integrity. We strive to cultivate a community in which a diverse population can learn and work in an atmosphere of civility and respect. We encourage innovation, experimentation and creativity, as well as contributions to equity and inclusion, in the pursuit of excellence for all members of our university community. The University is an Affirmative Action/Equal Opportunity Employer. We consider qualified applicants for employment without regard to race, religion, color, national origin, ancestry, age, sex, gender, gender identity, gender expression, sexual orientation, genetic information, medical condition, disability, marital status, or protected veteran status. Mandated Reporting: This position may be considered a "mandated reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Per the CSU COVID-19 Vaccination Policy , it is strongly recommended that all faculty, staff, administrators, and students who are accessing campus facilities follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications. Any candidates advanced in a currently open search process should be prepared to continue to help us protect and maintain a healthy Seawolf Community. More information related to campus level requirements can be found here: https://risk.sonoma.edu/covid- compliance-and-monitoring- office . CSU Out of State Policy - Sonoma State University, as part of the CSU system, is a State of California Employer. As such, the University requires all employees upon date of hire to reside in the State of California. As of January 1, 2022 the CSU Out-of-State Employment Policy prohibits the hiring of employees to perform CSU-related work outside the state of California. A background check (including a criminal records check) must be completed satisfactorily before any candidate can be offered a position. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current employees who apply for this position. Sonoma State University is not a sponsoring agency for staff positions (i.e. H-1B visas). Positions are posted for a minimum of 14 calendar days. For questions related to the application process, please reach out to hr@sonoma.edu . The ADA Coordinator is also available ( hraccommodations@sonoma.edu ) to assist individuals with disabilities in need of accommodation during the hiring process. Sonoma State University's Annual Security Report includes summaries of institutional policy relating to campus safety, drug and alcohol use, sexual assault, and other matters. The report is published in compliance with the Clery Act and includes three years of certain crime statistics that occurred in Clery Act defined geography. A paper copy of the report may be requested in person by emailing the Clery Compliance and Safety Office at clery@sonoma.edu . Pursuant to the Higher Education Opportunity Act, the Annual Fire Safety Report (AFSR) is available for viewing at https://housing.sonoma.edu/ resources/fire-safety . The purpose of this report is to disclose statistics for fires that occurred within Sonoma State University student housing facilities for three years, and to distribute fire safety policies and procedures intended to promote safety on campus. A paper copy of the AFSR is available upon request by contacting the Residential Education and Campus Housing at housing@sonoma.edu . Advertised: Mar 11 2024 Pacific Daylight Time Applications close: Closing Date/Time:
Mar 12, 2024
Application Process This position is open until filled. For full consideration, please submit application, along with cover letter and resume, by 8am on Tuesday, April 2, 2024. In your cover letter, please share why you want to work for Facilities Management and how your work experience is relevant to this position. Please review the position description listed above for full scope of responsibilities and qualifications. Evidence of degree(s) or certificate(s) and/or license(s) required at time of hire. Job Summary Available work schedule: Monday through Friday, 8:00 a.m. - 4:30 p.m. Reporting to the Housing Operations Manager, with additional lead work direction provided from other members of the Facilities Management team, the Maintenance Mechanic is responsible for all maintenance needs and work requests for student housing and any other structures or buildings operated by Sonoma State University. The incumbent independently performs a variety of skilled preventive and general maintenance, repair, construction, and renovation work on facilities and systems, including routine maintenance, repairs from normal wear and use, and vandalism. Key Qualifications This position requires four years of increasingly responsible experience leading to journey-level skills in a mechanical or facility/building trade, or any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Beginning proficiency with computers and Microsoft Office (Word, Excel) required. Knowledge of Google Suite, computerized work control system, building automation systems; and PeopleSoft preferred. The incumbent must successfully complete a pre-placement exam and must possess and maintain a California Driver’s License valid for the operation of any vehicle or equipment required to maintain and operate. Salary and Benefits Starting salary placement depends on qualifications and experience and will not exceed $6,076 a month. This is a full time, non-exempt position, which will lead toward permanent status following the successful completion of a probationary period. This position is eligible for a broad range of benefits, including medical, dental, vision, life and disability insurances, retirement (CalPERS), tuition waiver, vacation and sick leave. In addition, 15 paid holidays are offered each year. Sonoma State University is also a Public Service Loan Forgiveness Program (PSLF) Employer. A comprehensive benefits summary for this position is available online by clicking here to be taken to the CSU benefits page. Supplemental Information Sonoma State University is committed to achieving excellence through teaching, scholarship, learning and inclusion. In line with our Strategic Plan and our Seawolf Commitment, our values include diversity, sustainability, community engagement, respect, responsibility, excellence and integrity. We strive to cultivate a community in which a diverse population can learn and work in an atmosphere of civility and respect. We encourage innovation, experimentation and creativity, as well as contributions to equity and inclusion, in the pursuit of excellence for all members of our university community. The University is an Affirmative Action/Equal Opportunity Employer. We consider qualified applicants for employment without regard to race, religion, color, national origin, ancestry, age, sex, gender, gender identity, gender expression, sexual orientation, genetic information, medical condition, disability, marital status, or protected veteran status. Mandated Reporting: This position may be considered a "mandated reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Per the CSU COVID-19 Vaccination Policy , it is strongly recommended that all faculty, staff, administrators, and students who are accessing campus facilities follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications. Any candidates advanced in a currently open search process should be prepared to continue to help us protect and maintain a healthy Seawolf Community. More information related to campus level requirements can be found here: https://risk.sonoma.edu/covid- compliance-and-monitoring- office . CSU Out of State Policy - Sonoma State University, as part of the CSU system, is a State of California Employer. As such, the University requires all employees upon date of hire to reside in the State of California. As of January 1, 2022 the CSU Out-of-State Employment Policy prohibits the hiring of employees to perform CSU-related work outside the state of California. A background check (including a criminal records check) must be completed satisfactorily before any candidate can be offered a position. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current employees who apply for this position. Sonoma State University is not a sponsoring agency for staff positions (i.e. H-1B visas). Positions are posted for a minimum of 14 calendar days. For questions related to the application process, please reach out to hr@sonoma.edu . The ADA Coordinator is also available ( hraccommodations@sonoma.edu ) to assist individuals with disabilities in need of accommodation during the hiring process. Sonoma State University's Annual Security Report includes summaries of institutional policy relating to campus safety, drug and alcohol use, sexual assault, and other matters. The report is published in compliance with the Clery Act and includes three years of certain crime statistics that occurred in Clery Act defined geography. A paper copy of the report may be requested in person by emailing the Clery Compliance and Safety Office at clery@sonoma.edu . Pursuant to the Higher Education Opportunity Act, the Annual Fire Safety Report (AFSR) is available for viewing at https://housing.sonoma.edu/ resources/fire-safety . The purpose of this report is to disclose statistics for fires that occurred within Sonoma State University student housing facilities for three years, and to distribute fire safety policies and procedures intended to promote safety on campus. A paper copy of the AFSR is available upon request by contacting the Residential Education and Campus Housing at housing@sonoma.edu . Advertised: Mar 11 2024 Pacific Daylight Time Applications close: Closing Date/Time:
HOUSTON AIRPORT SYSTEM
Houston, Texas, United States
POSITION OVERVIEW Applications will be accepted from: All Persons Interested Division/ Section: HAS Maintenance Workdays & Hours: *Varied (Shift work, including rotation, weekends and holidays) subject to change* PURPOSE OF DIVISION The purpose of Houston Airport System (HAS) Maintenance, General Maintenance Services Business Unit it is to effectively deliver self-performed maintenance services at each of the three HAS airports. PURPOSE OF THE POSITION The purpose of the Maintenance Mechanic III position is to prevent mechanical failure of equipment, to identify and correct safety hazards, and inspect, repair, clean and maintain several types of equipment: pumps, miscellaneous rotating and reciprocating equipment, plumbing equipment (sinks, commodes, urinals, flush valves, and faucets) and machinery throughout the airport complex. This position may be assigned duties at all Houston Airport System facilities including IAH, HOU, and EFD. "Must be able to pass a criminal background check, obtain and maintain federally mandated security clearances where required." The Maintenance Mechanic III duties will include but are not limited to: Installs mechanical equipment and components. Repairs, refurbishes and maintains several types of pumps (i.e. hydraulic, oil, gas, diesel) and miscellaneous rotating and reciprocating equipment and machinery. Operates vehicles to and from work sites. Repairs and maintains equipment and parts. Practices equipment and parts conservation. Performs additional maintenance activities such as painting, a/c repairs, carpentry, carpet, plumbing, concrete and roofing repairs as in general building maintenance. Rehabilitates and monitors equipment, facilities, and systems (i.e. elevators, escalators, automatic doors, ticket dispenser's electric gates, a/c and heating equipment). Provides preventive maintenance to equipment, buildings, facilities and systems. May lead and train lower-level personnel. WORKING CONDITIONS The position involves considerable physical exertion, such as regular climbing of ladders, lifting of heavy objects (up to 80 pounds) on a highly frequent basis and/or assuming awkward positions for long periods of time. There are routine exposures to significant levels of heat, cold, moisture and air pollution. The position may involve periodic exposure to chemical substances and physical trauma of a minor nature such as cuts, bruises and minor burns. Requires the ability to make closely coordinated eye/hand movements within very fine tolerance and/or calibration demands; or the ability to make rapid closely coordinated eye/hand movements on a patterned response space within somewhat fine tolerance demands; or the ability to make coordinated eye/hand movements within fine tolerances with large equipment as an extension of the worker. Walking and standing for extended periods of time. Working rotation, weekends including holiday shifts. MINIMUM REQUIREMENTS EDUCATIONAL REQUIREMENTS Specialized training in principles, procedures, practices, routines or techniques in a specific area or trade which might normally be acquired through up to 18 months of Education or Training beyond the High School level. Vocational competence in the operation of Mechanical or Electronic equipment may be required. EXPERIENCE REQUIREMENTS One year of experience in building or mechanical maintenance is required. LICENSE REQUIREMENTS Must have a valid Texas driver's license and comply with the City of Houston's policy on driving. May require a valid Commercial Driver's License (CDL). PREFERENCES ****Preference shall be given to eligible veteran applicants provided such persons possess the qualifications necessary for competent discharge of the duties involved in the position applied for, such persons are among the most qualified candidates for the position, and all other factors in accordance with Executive Order 1-6.**** GENERAL INFORMATION SELECTION/SKILLS TESTS REQUIRED The selection process will involve application review and/or interview. Department may administer skills assessment test. SAFETY IMPACT POSITION YES, this position is subject to random drug testing and if a promotional position, candidate must pass an assignment drug test. Pay Grade 14 SALARY INFORMATION Factors used in determining the salary offered include the candidate's qualifications as well as the pay rates of other employees in this classification. APPLICATION PROCEDURES Only online applications will be accepted for this City of Houston job and must be received by the Human Resources Department during active posting period. Applications must be submitted online at: www.houstontx.gov . To view your detailed application status, please log-in to your online profile by visiting: http://agency.governmentjobs.com/houston/default.cfm or call (281-233-1043). If you need login assistance or technical support call 855-524-5627. If you need special services or accommodations, call (281-233-1043). (TTY 7-1-1) Due to the high volume of applications received, the Hiring Department will contact you directly, should you be selected to advance in our recruitment process. All new and rehires must pass a pre-employment drug test and are subject to a physical examination and verification of information provided. Applicants are encouraged to attach a cover letter and resume along with their completed application when applying. For further information pertaining to the Houston Airport System, please visit: https://www.youtube.com/watch?v=EDWLV_sJFoM . EOE Equal Opportunity Employment The City of Houston is committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, genetic information, veteran status, gender identity, or pregnancy. The city offers a competitive benefits program, including competitively priced health coverage and a defined contribution pension plan. Benefits include: • Medical • Dental • Vision • Wellness • Life insurance • Long-term disability • Retirement pension • 457 deferred compensation plan • Employee Assistance Program • 10 days of vacation each year • 11 city holidays, plus one floating holiday • Flexible schedules • Professional development opportunities • Transportation/parking plan • Section 125 pretax deductions • Dependent Care Reimbursement Plan • Healthcare Flexible Spending Account For plan details, visit http://www.houstontx.gov/hr/benefits.html Closing Date/Time: 7/8/2024 11:55 PM Central
Jun 18, 2024
Full Time
POSITION OVERVIEW Applications will be accepted from: All Persons Interested Division/ Section: HAS Maintenance Workdays & Hours: *Varied (Shift work, including rotation, weekends and holidays) subject to change* PURPOSE OF DIVISION The purpose of Houston Airport System (HAS) Maintenance, General Maintenance Services Business Unit it is to effectively deliver self-performed maintenance services at each of the three HAS airports. PURPOSE OF THE POSITION The purpose of the Maintenance Mechanic III position is to prevent mechanical failure of equipment, to identify and correct safety hazards, and inspect, repair, clean and maintain several types of equipment: pumps, miscellaneous rotating and reciprocating equipment, plumbing equipment (sinks, commodes, urinals, flush valves, and faucets) and machinery throughout the airport complex. This position may be assigned duties at all Houston Airport System facilities including IAH, HOU, and EFD. "Must be able to pass a criminal background check, obtain and maintain federally mandated security clearances where required." The Maintenance Mechanic III duties will include but are not limited to: Installs mechanical equipment and components. Repairs, refurbishes and maintains several types of pumps (i.e. hydraulic, oil, gas, diesel) and miscellaneous rotating and reciprocating equipment and machinery. Operates vehicles to and from work sites. Repairs and maintains equipment and parts. Practices equipment and parts conservation. Performs additional maintenance activities such as painting, a/c repairs, carpentry, carpet, plumbing, concrete and roofing repairs as in general building maintenance. Rehabilitates and monitors equipment, facilities, and systems (i.e. elevators, escalators, automatic doors, ticket dispenser's electric gates, a/c and heating equipment). Provides preventive maintenance to equipment, buildings, facilities and systems. May lead and train lower-level personnel. WORKING CONDITIONS The position involves considerable physical exertion, such as regular climbing of ladders, lifting of heavy objects (up to 80 pounds) on a highly frequent basis and/or assuming awkward positions for long periods of time. There are routine exposures to significant levels of heat, cold, moisture and air pollution. The position may involve periodic exposure to chemical substances and physical trauma of a minor nature such as cuts, bruises and minor burns. Requires the ability to make closely coordinated eye/hand movements within very fine tolerance and/or calibration demands; or the ability to make rapid closely coordinated eye/hand movements on a patterned response space within somewhat fine tolerance demands; or the ability to make coordinated eye/hand movements within fine tolerances with large equipment as an extension of the worker. Walking and standing for extended periods of time. Working rotation, weekends including holiday shifts. MINIMUM REQUIREMENTS EDUCATIONAL REQUIREMENTS Specialized training in principles, procedures, practices, routines or techniques in a specific area or trade which might normally be acquired through up to 18 months of Education or Training beyond the High School level. Vocational competence in the operation of Mechanical or Electronic equipment may be required. EXPERIENCE REQUIREMENTS One year of experience in building or mechanical maintenance is required. LICENSE REQUIREMENTS Must have a valid Texas driver's license and comply with the City of Houston's policy on driving. May require a valid Commercial Driver's License (CDL). PREFERENCES ****Preference shall be given to eligible veteran applicants provided such persons possess the qualifications necessary for competent discharge of the duties involved in the position applied for, such persons are among the most qualified candidates for the position, and all other factors in accordance with Executive Order 1-6.**** GENERAL INFORMATION SELECTION/SKILLS TESTS REQUIRED The selection process will involve application review and/or interview. Department may administer skills assessment test. SAFETY IMPACT POSITION YES, this position is subject to random drug testing and if a promotional position, candidate must pass an assignment drug test. Pay Grade 14 SALARY INFORMATION Factors used in determining the salary offered include the candidate's qualifications as well as the pay rates of other employees in this classification. APPLICATION PROCEDURES Only online applications will be accepted for this City of Houston job and must be received by the Human Resources Department during active posting period. Applications must be submitted online at: www.houstontx.gov . To view your detailed application status, please log-in to your online profile by visiting: http://agency.governmentjobs.com/houston/default.cfm or call (281-233-1043). If you need login assistance or technical support call 855-524-5627. If you need special services or accommodations, call (281-233-1043). (TTY 7-1-1) Due to the high volume of applications received, the Hiring Department will contact you directly, should you be selected to advance in our recruitment process. All new and rehires must pass a pre-employment drug test and are subject to a physical examination and verification of information provided. Applicants are encouraged to attach a cover letter and resume along with their completed application when applying. For further information pertaining to the Houston Airport System, please visit: https://www.youtube.com/watch?v=EDWLV_sJFoM . EOE Equal Opportunity Employment The City of Houston is committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, genetic information, veteran status, gender identity, or pregnancy. The city offers a competitive benefits program, including competitively priced health coverage and a defined contribution pension plan. Benefits include: • Medical • Dental • Vision • Wellness • Life insurance • Long-term disability • Retirement pension • 457 deferred compensation plan • Employee Assistance Program • 10 days of vacation each year • 11 city holidays, plus one floating holiday • Flexible schedules • Professional development opportunities • Transportation/parking plan • Section 125 pretax deductions • Dependent Care Reimbursement Plan • Healthcare Flexible Spending Account For plan details, visit http://www.houstontx.gov/hr/benefits.html Closing Date/Time: 7/8/2024 11:55 PM Central
California Polytechnic State University
1 Grand Avenue, San Luis Obispo, CA 93407, USA
Job Summary Under general supervision of the University Housing Maintenance Manager, the Facilities Maintenance Mechanic is a skilled generalist, performing at a journey-level in one trade with strong skills in other trades. The Facilities Maintenance Mechanic works within the Facilities Operations Department of FMD which is responsible for providing quality maintenance and minor repair and renovation •services that meet or exceed our customers' expectations. This position independently performs a variety of skilled preventive and general maintenance, repair, construction, and renovation work on facilities and systems, particularly in the electro-mechanical trades. With general supervision, this position also performs scheduled preventive maintenance on installed equipment including scheduled inspections, documentation of results, grease and lubrication, filter and belt replacement, fluid level checks, and repair or replacement of broken parts. Hours are Monday - Friday 3:00-11:30pm or Tuesday - Saturday 3:00 - 11:30pm. Employees would be eligible for shift differential. Department Summary Facilities Management and Development (FMD), a unit within the Administration and Finance Division (AFD), is responsible for the planning, design, construction, operations, maintenance, and repair of university facilities, grounds, and infrastructure. FMD consists of five critical and interdependent support departments, including Customer & Business Services; Energy, Utilities, & Sustainability; Environmental Health & Safety; Facilities Planning & Capital Projects; and Facilities Operations. In support of the Cal Poly mission, the FMD department is committed to sustainability, responsible stewardship of natural resources, and promoting an inclusive culture that values individual and organizational integrity, civility, equity, and diversity. Key Qualifications Demonstrated journey-level skills in one trade area and strong skills in other applicable trades. Thorough knowledge of the methods, materials, equipment and tools used in one skilled trade area as well as the generally accepted trade practices associated with that trade. Working knowledge of methods, materials, equipment and tools in related trade areas pertaining to facilities, systems, construction and renovation. Working knowledge of computerized maintenance and building automation systems. Working knowledge of applicable building and safety codes and regulations related to facilities, systems and renovations. Education and Experience Four years of increasingly responsible experience leading to journey-level skills in a mechanical or facilities/building trade OR any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Salary and Benefits Anticipated Hiring Range: $72,917 - $83,056 per year Classification Range: $72,912 - $93,192 per year Cal Poly offers a best-in-class benefits program, including health, dental and vision insurance, retirement participation in the Public Employees' Retirement System, and educational benefits for eligible employees. See our benefits website for additional information. Cal Poly Cal Poly is a nationally-ranked public university located in San Luis Obispo, California, and known for its Learn by Doing philosophy. Each year more than 20,000 top-tier students come to San Luis Obispo to put knowledge into action, taking their learning outside the classroom as they prepare for careers in engineering, agriculture, science, business, humanities and the built environment. Cal Poly’s hands-on philosophy, small class sizes and close student-faculty mentorships result in graduates ready from day one to impact their communities, California and the world. For more information, visit calpoly.edu . Diversity Statement At Cal Poly, we believe that cultivating an environment that embraces and promotes diversity is fundamental to the success of our students, our employees and our community. Bringing people together from different backgrounds, experiences and value systems fosters the innovative and creative thinking that exemplifies Cal Poly's values of free inquiry, cultural and intellectual diversity, mutual respect, civic engagement, and social and environmental responsibility. Cal Poly's commitment to diversity informs our efforts in recruitment, hiring and retention. Cal Poly is an equal opportunity employer. Supplemental Information Following a conditional offer of employment, a background check (including a criminal records check) must be completed satisfactorily before any candidate may start work with Cal Poly. Failure to satisfactorily complete the background check may result in the withdrawal of the offer of employment. Current employees who are offered positions on campus will be required to undergo a background check for any position where a background check is required by law or that Cal Poly has designated as sensitive. The person holding this position is considered a 'mandated reporter' under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Cal Poly, San Luis Obispo is not a sponsoring agency for staff positions (i.e. H-1B visas). Positions are posted for a minimum of 14 calendar days. Advertised: May 13 2024 Pacific Daylight Time Applications close: Closing Date/Time:
Mar 07, 2024
Job Summary Under general supervision of the University Housing Maintenance Manager, the Facilities Maintenance Mechanic is a skilled generalist, performing at a journey-level in one trade with strong skills in other trades. The Facilities Maintenance Mechanic works within the Facilities Operations Department of FMD which is responsible for providing quality maintenance and minor repair and renovation •services that meet or exceed our customers' expectations. This position independently performs a variety of skilled preventive and general maintenance, repair, construction, and renovation work on facilities and systems, particularly in the electro-mechanical trades. With general supervision, this position also performs scheduled preventive maintenance on installed equipment including scheduled inspections, documentation of results, grease and lubrication, filter and belt replacement, fluid level checks, and repair or replacement of broken parts. Hours are Monday - Friday 3:00-11:30pm or Tuesday - Saturday 3:00 - 11:30pm. Employees would be eligible for shift differential. Department Summary Facilities Management and Development (FMD), a unit within the Administration and Finance Division (AFD), is responsible for the planning, design, construction, operations, maintenance, and repair of university facilities, grounds, and infrastructure. FMD consists of five critical and interdependent support departments, including Customer & Business Services; Energy, Utilities, & Sustainability; Environmental Health & Safety; Facilities Planning & Capital Projects; and Facilities Operations. In support of the Cal Poly mission, the FMD department is committed to sustainability, responsible stewardship of natural resources, and promoting an inclusive culture that values individual and organizational integrity, civility, equity, and diversity. Key Qualifications Demonstrated journey-level skills in one trade area and strong skills in other applicable trades. Thorough knowledge of the methods, materials, equipment and tools used in one skilled trade area as well as the generally accepted trade practices associated with that trade. Working knowledge of methods, materials, equipment and tools in related trade areas pertaining to facilities, systems, construction and renovation. Working knowledge of computerized maintenance and building automation systems. Working knowledge of applicable building and safety codes and regulations related to facilities, systems and renovations. Education and Experience Four years of increasingly responsible experience leading to journey-level skills in a mechanical or facilities/building trade OR any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Salary and Benefits Anticipated Hiring Range: $72,917 - $83,056 per year Classification Range: $72,912 - $93,192 per year Cal Poly offers a best-in-class benefits program, including health, dental and vision insurance, retirement participation in the Public Employees' Retirement System, and educational benefits for eligible employees. See our benefits website for additional information. Cal Poly Cal Poly is a nationally-ranked public university located in San Luis Obispo, California, and known for its Learn by Doing philosophy. Each year more than 20,000 top-tier students come to San Luis Obispo to put knowledge into action, taking their learning outside the classroom as they prepare for careers in engineering, agriculture, science, business, humanities and the built environment. Cal Poly’s hands-on philosophy, small class sizes and close student-faculty mentorships result in graduates ready from day one to impact their communities, California and the world. For more information, visit calpoly.edu . Diversity Statement At Cal Poly, we believe that cultivating an environment that embraces and promotes diversity is fundamental to the success of our students, our employees and our community. Bringing people together from different backgrounds, experiences and value systems fosters the innovative and creative thinking that exemplifies Cal Poly's values of free inquiry, cultural and intellectual diversity, mutual respect, civic engagement, and social and environmental responsibility. Cal Poly's commitment to diversity informs our efforts in recruitment, hiring and retention. Cal Poly is an equal opportunity employer. Supplemental Information Following a conditional offer of employment, a background check (including a criminal records check) must be completed satisfactorily before any candidate may start work with Cal Poly. Failure to satisfactorily complete the background check may result in the withdrawal of the offer of employment. Current employees who are offered positions on campus will be required to undergo a background check for any position where a background check is required by law or that Cal Poly has designated as sensitive. The person holding this position is considered a 'mandated reporter' under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Cal Poly, San Luis Obispo is not a sponsoring agency for staff positions (i.e. H-1B visas). Positions are posted for a minimum of 14 calendar days. Advertised: May 13 2024 Pacific Daylight Time Applications close: Closing Date/Time:
SAN ANTONIO WATER SYSTEM
San Antonio, Texas, United States
Grade 15: S tarting Hourly Rate: $19.8000. Rate of pay depends on qualifications. Job Description JO B SUMMARY The Maintenance Mechanic - Production is responsible for the basic maintenance and repair of equipment and facilities. This position will support multiple facilities with varying processes, equipment and functional requirements. E SS E N T IA L FUNCTIONS Diagnose and resolves standard water or wastewater facility machinery, piping and equipment problems. Performs predictive, preventative and corrective maintenance duties. Tracks and records information required in work order documents and enters into computerized maintenance management system (CMMS), and uses Microsoft Office. Performs standard level diagnostic tests to resolve routine problems. Repairs plant machinery and equipment, using hoists, jacks, ladders, confined space equipment, PPE, welding equipment, hand tools, squares, rules, micrometers, and other tools. Dismantles, constructs and assembles various components of facilities, industrial machinery or equipment. Performs confined space entries in hazardous environments. Monitors mechanical equipment and makes functional adjustments. Cleans and lubricates machinery and equipment according to specifications. Identifies parts with specifications and orders replacements. Furnishes mechanical recommendation when ordering new parts, machinery and equipment. Has knowledge of basic electrical and instrumentation principles. Promotes and practices a safe working environment in an industrial setting. Applies basic principles of mechanical maintenance. Performs work in accordance with TCEQ, OSHA, and other applicable government regulations. Reads O & M manuals, as-built drawings, block maps, schematics, and construction plans. Establishes and maintains effective working relationship and public relations. May operate a forklift, powered vertical lifting machinery, utility truck, crane, combination unit, water tanker, or other heavy equipment. Performs other duties as assigned. D E C I SI O N MAKING Receives general supervision. May refer more complex issues to higher levels. May act as a team leader. M IN I MU M REQUIREMENTS Graduation from high school or a General Education Development (GED) Certificate. Two years' experience performing repairs and maintenance in the mechanical trade. Training on Confined space, HAZMAT Awareness, Lock Out Tag Out, Supervising for Safety, Fit Testing, Electrical Safety, and other certifications as required. Ability to report to work on time, maintain a good attendance record, and work all designated work schedules. Valid Class "CDL-A" Texas Driver's License with Tanker and Hazardous Material endorsements, or obtain within 90 days. TCEQ Class "D" Water Operator License within 6 months AND TCEQ Class "C" Texas Groundwater Treatment Operator License within3 years. Subject to climb 200 feet in height. P R E F E R R E D QUALIFICATIONS TCEQ Class "C" Groundwater Treatment Operator License. JOB DIMENSIONS Skill in applying basic math and measurement principles. Skill in utilizing a personal computer and associated software programs. Skill in proficient use of materials, tools, and equipment commonly used in mechanical maintenance or repair of industrial facilities. Ability to enter and maintain information in the computerized maintenance management system. Ability to establish and maintain effective working relationships with internal and external customers, contractors and vendors. Ability to communicate effectively, verbally and in writing. P H Y S IC A L DEMANDS AND WORKING CONDITIONS Physical requirements include lifting up to 90 pounds occasionally. Subject to standing, sitting, walking, climbing, bending, crawling, squatting, kneeling and working in cramped and strained positions for extended periods of time to perform job scope. Subject to climbing up to 200 feet in height. Working conditions are primarily outside with frequent exposure to inclement weather; water production and recycled activities; mechanical, electrical, chemical and confined space hazards; offensive fumes; excessive noise; deep excavations; and animals, snakes and poisonous insects. Required to comply with requirements as specified in applicable regulations for personal protective equipment, including clearance for use of respiratory protection and other associated equipment. Performs confined space entries in hazardous environments. If part of the emergency action team, must be able to complete the requirements as specified in applicable regulations for Hazardous Materials Emergency Response, including clearance for use of respiratory protection and other associated protective equipment. Ability to participate in emergency action team during chemical release incidents and/or drills. Operates company vehicle on a daily basis. May be required to work hours other than regular daytime schedules such as shift work, nights, weekends and holidays. San Antonio Water System values the contributions of all its employees, providing them the best in compensation and benefits. The benefits package is designed to attract and retain a workforce of qualified employees who share a responsibility in providing quality water to 1 million consumers. From an affordable medical and dental plan to life-sustaining retirement and insurance plans, we offer benefits that reward employees for their commitment to a challenging career at SAWS. Employee benefits include the following: Competitive, market-based salaries Performance-based incentives Medical benefits Dental benefits Life insurance Prescription drug program Vision care plan Two retirement plans Deferred compensation plans (457 plan) Disability income Paid leave (vacation, sick, personal) Education assistance program Employee assistance program Flexible, tax-deferred health and dependent care spending accounts Wellness programs On-Site Fitness Facilities Community service opportunities
Jun 13, 2024
Full Time
Grade 15: S tarting Hourly Rate: $19.8000. Rate of pay depends on qualifications. Job Description JO B SUMMARY The Maintenance Mechanic - Production is responsible for the basic maintenance and repair of equipment and facilities. This position will support multiple facilities with varying processes, equipment and functional requirements. E SS E N T IA L FUNCTIONS Diagnose and resolves standard water or wastewater facility machinery, piping and equipment problems. Performs predictive, preventative and corrective maintenance duties. Tracks and records information required in work order documents and enters into computerized maintenance management system (CMMS), and uses Microsoft Office. Performs standard level diagnostic tests to resolve routine problems. Repairs plant machinery and equipment, using hoists, jacks, ladders, confined space equipment, PPE, welding equipment, hand tools, squares, rules, micrometers, and other tools. Dismantles, constructs and assembles various components of facilities, industrial machinery or equipment. Performs confined space entries in hazardous environments. Monitors mechanical equipment and makes functional adjustments. Cleans and lubricates machinery and equipment according to specifications. Identifies parts with specifications and orders replacements. Furnishes mechanical recommendation when ordering new parts, machinery and equipment. Has knowledge of basic electrical and instrumentation principles. Promotes and practices a safe working environment in an industrial setting. Applies basic principles of mechanical maintenance. Performs work in accordance with TCEQ, OSHA, and other applicable government regulations. Reads O & M manuals, as-built drawings, block maps, schematics, and construction plans. Establishes and maintains effective working relationship and public relations. May operate a forklift, powered vertical lifting machinery, utility truck, crane, combination unit, water tanker, or other heavy equipment. Performs other duties as assigned. D E C I SI O N MAKING Receives general supervision. May refer more complex issues to higher levels. May act as a team leader. M IN I MU M REQUIREMENTS Graduation from high school or a General Education Development (GED) Certificate. Two years' experience performing repairs and maintenance in the mechanical trade. Training on Confined space, HAZMAT Awareness, Lock Out Tag Out, Supervising for Safety, Fit Testing, Electrical Safety, and other certifications as required. Ability to report to work on time, maintain a good attendance record, and work all designated work schedules. Valid Class "CDL-A" Texas Driver's License with Tanker and Hazardous Material endorsements, or obtain within 90 days. TCEQ Class "D" Water Operator License within 6 months AND TCEQ Class "C" Texas Groundwater Treatment Operator License within3 years. Subject to climb 200 feet in height. P R E F E R R E D QUALIFICATIONS TCEQ Class "C" Groundwater Treatment Operator License. JOB DIMENSIONS Skill in applying basic math and measurement principles. Skill in utilizing a personal computer and associated software programs. Skill in proficient use of materials, tools, and equipment commonly used in mechanical maintenance or repair of industrial facilities. Ability to enter and maintain information in the computerized maintenance management system. Ability to establish and maintain effective working relationships with internal and external customers, contractors and vendors. Ability to communicate effectively, verbally and in writing. P H Y S IC A L DEMANDS AND WORKING CONDITIONS Physical requirements include lifting up to 90 pounds occasionally. Subject to standing, sitting, walking, climbing, bending, crawling, squatting, kneeling and working in cramped and strained positions for extended periods of time to perform job scope. Subject to climbing up to 200 feet in height. Working conditions are primarily outside with frequent exposure to inclement weather; water production and recycled activities; mechanical, electrical, chemical and confined space hazards; offensive fumes; excessive noise; deep excavations; and animals, snakes and poisonous insects. Required to comply with requirements as specified in applicable regulations for personal protective equipment, including clearance for use of respiratory protection and other associated equipment. Performs confined space entries in hazardous environments. If part of the emergency action team, must be able to complete the requirements as specified in applicable regulations for Hazardous Materials Emergency Response, including clearance for use of respiratory protection and other associated protective equipment. Ability to participate in emergency action team during chemical release incidents and/or drills. Operates company vehicle on a daily basis. May be required to work hours other than regular daytime schedules such as shift work, nights, weekends and holidays. San Antonio Water System values the contributions of all its employees, providing them the best in compensation and benefits. The benefits package is designed to attract and retain a workforce of qualified employees who share a responsibility in providing quality water to 1 million consumers. From an affordable medical and dental plan to life-sustaining retirement and insurance plans, we offer benefits that reward employees for their commitment to a challenging career at SAWS. Employee benefits include the following: Competitive, market-based salaries Performance-based incentives Medical benefits Dental benefits Life insurance Prescription drug program Vision care plan Two retirement plans Deferred compensation plans (457 plan) Disability income Paid leave (vacation, sick, personal) Education assistance program Employee assistance program Flexible, tax-deferred health and dependent care spending accounts Wellness programs On-Site Fitness Facilities Community service opportunities
San Diego State University
5500 Campanile Drive, San Diego, CA 92182, USA
Position Summary Under general supervision, the Facilities Maintenance Mechanic performs a variety of complex skilled maintenance, repair, and renovation work. Completes all routine work assignments and performs all additional duties as assigned. The incumbent maintains equipment and a safe and clean working environment. Consistently meets university needs in a timely and professional manner with increasingly improved skill. Completes every project or task to the satisfaction of the Facilities Services Associate Director. Maintains an accurate attendance record, is punctual and consistently meets deadlines. Builds and maintains internal and external customer satisfaction with the products and services offered by the organization. Seeks feedback, is responsive to stakeholders and takes appropriate action for the situation. The Facilities Maintenance Mechanic performs work in a manner that supports and facilitates the work of others in Facilities Services and the university community. Maintains a positive and cooperative working relationship with members of the department and campus community by practicing individual dignity, using tact and diplomacy, and always being respectful and civil. Utilizes respectful communication when dealing with people in all situations, demonstrating restraint, fairness, and firmness. Works effectively to understand by carefully listening and working to be understood. Demonstrates restraint, fairness, and firmness with all people in all situations. Must be able to effectively communicate and successfully interact with a variety of individuals in a diverse environment at all levels of the organization. Maintains confidentiality and works appropriately within the department hierarchy. Communicates effectively to resolve problems Maintenance and proactively resolve conflicts or disagreements in the workplace, makes suggestions and asks pertinent questions to facilitate effective communication. Must be able to perform strenuous physical work while using mechanical aptitude and motor coordination. Implements safety procedures, resolves problems, and improves safety in the workplace. Works to instill in others the importance of workplace safety rules and regulations and takes appropriate actions. Conducts hazard assessments, addresses hazards appropriately and applies controls as appropriate to address/mitigate hazards; promptly follows-up with health and safety risks, taking appropriate action(s), and provides necessary reports and documentation. This is a full-time (1.0 time-base), temporary position anticipated to end six months from the start date. This position is eligible for ACA (medical only) benefits. This position is designated non-exempt under FLSA and is eligible for overtime compensation. Work hours are Monday - Friday, 6:00 a.m. to 2:30 p.m., but may vary based on operational needs. The individual hired into this role will work on campus at SDSU in San Diego. Department Summary SDSU Facilities Services is a customer-service based organization providing facility maintenance activities through a transparent and deliberate process. It is responsible for the operation, maintenance, repair, renovation, remodel, and alteration activities in support of the academic and research mission of the university. Facilities Services employs over 235 employees (full time and students) and supports approximately eight million square feet of building space (including residence halls and parking structures) and 280 acres of improved and unimproved land. For more information regarding the Facilities Services Department click here Education and Experience These abilities normally would be acquired through four years of increasingly responsible experience leading to journey-level skills in a mechanical or facilities/building trade, or any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Key Qualifications Prior experience at a similar higher education environment, government or a large multi-building facility environment is preferred. Experience using a computerized maintenance management system. Five years of verifiable employment experience performing work in one or more of the following trades Electrical field is preferred; technical trade school certification may substitute for one year of work experience. Licenses/ Certifications Required Valid California Driver’s License or the ability to obtain one within 10 days of hire. Compensation and Benefits Starting salary upon appointment is not expected to exceed $5,787 per month. Salary placement is determined by the education, experience, and qualifications the candidate brings to the position, internal equity, and the hiring department’s fiscal resources. CSU Classification Salary Range: $5,787 - $7,396 per month. Diversity and Community at SDSU At SDSU, our diversity gives us power and benefits every single member of our community. Through our commitment to equity and inclusion, we encourage all members of our community to purposefully learn from one another through open and respectful dialogue and responsible engagement. For more information, click here . Principles of Community At San Diego State University, we are a community of diverse individuals who have and represent many perspectives, beliefs and identities. This diversity lends our community strength, and we commit to creating and sustaining an inclusive and intellectually vibrant environment that benefits all members of our university. SDSU’s Principles of Community is an aspirational statement that is intended to evolve over time. The statement reflects the ideals we are encouraged to uphold in our interactions with one another. Supplemental Information Initial review of the required application materials, including cover letters and resumes, will begin on June 7, 2024. To receive full consideration, apply by June 6, 2024 The position will remain open until filled. The person holding this position is considered a ‘mandated reporter’ under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. San Diego State University is not a sponsoring agency for staff or management positions (e.g., H-1B visa). Applicants must currently be authorized to work in the United States on a full-time basis. Offers of employment are contingent upon the presentation of documents that demonstrate a person's identity and authorization to work in the United States, which are consistent with the provisions of the Immigration Reform and Control Act. A background check (including a criminal records check) must be completed satisfactorily and is required for employment. SDSU will make a conditional offer of employment, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current SDSU employee who was conditionally offered the position. SDSU is a smoke-free campus. For more information, please click here . SDSU is an Equal Opportunity Employer that considers all qualified candidates for employment and does not discriminate on the basis of race, religion, color, ancestry, age, disability, genetic information, gender, gender identity, gender expression, marital status, medical condition, national origin, sex, sexual orientation, covered military and veteran status, or any other protected characteristic or status. Reasonable accommodations will be provided for qualified applicants with disabilities who request an accommodation by contacting Michelle Puentes at mpuentes2@sdsu.edu . Advertised: May 24 2024 Pacific Daylight Time Applications close: Closing Date/Time:
May 25, 2024
Position Summary Under general supervision, the Facilities Maintenance Mechanic performs a variety of complex skilled maintenance, repair, and renovation work. Completes all routine work assignments and performs all additional duties as assigned. The incumbent maintains equipment and a safe and clean working environment. Consistently meets university needs in a timely and professional manner with increasingly improved skill. Completes every project or task to the satisfaction of the Facilities Services Associate Director. Maintains an accurate attendance record, is punctual and consistently meets deadlines. Builds and maintains internal and external customer satisfaction with the products and services offered by the organization. Seeks feedback, is responsive to stakeholders and takes appropriate action for the situation. The Facilities Maintenance Mechanic performs work in a manner that supports and facilitates the work of others in Facilities Services and the university community. Maintains a positive and cooperative working relationship with members of the department and campus community by practicing individual dignity, using tact and diplomacy, and always being respectful and civil. Utilizes respectful communication when dealing with people in all situations, demonstrating restraint, fairness, and firmness. Works effectively to understand by carefully listening and working to be understood. Demonstrates restraint, fairness, and firmness with all people in all situations. Must be able to effectively communicate and successfully interact with a variety of individuals in a diverse environment at all levels of the organization. Maintains confidentiality and works appropriately within the department hierarchy. Communicates effectively to resolve problems Maintenance and proactively resolve conflicts or disagreements in the workplace, makes suggestions and asks pertinent questions to facilitate effective communication. Must be able to perform strenuous physical work while using mechanical aptitude and motor coordination. Implements safety procedures, resolves problems, and improves safety in the workplace. Works to instill in others the importance of workplace safety rules and regulations and takes appropriate actions. Conducts hazard assessments, addresses hazards appropriately and applies controls as appropriate to address/mitigate hazards; promptly follows-up with health and safety risks, taking appropriate action(s), and provides necessary reports and documentation. This is a full-time (1.0 time-base), temporary position anticipated to end six months from the start date. This position is eligible for ACA (medical only) benefits. This position is designated non-exempt under FLSA and is eligible for overtime compensation. Work hours are Monday - Friday, 6:00 a.m. to 2:30 p.m., but may vary based on operational needs. The individual hired into this role will work on campus at SDSU in San Diego. Department Summary SDSU Facilities Services is a customer-service based organization providing facility maintenance activities through a transparent and deliberate process. It is responsible for the operation, maintenance, repair, renovation, remodel, and alteration activities in support of the academic and research mission of the university. Facilities Services employs over 235 employees (full time and students) and supports approximately eight million square feet of building space (including residence halls and parking structures) and 280 acres of improved and unimproved land. For more information regarding the Facilities Services Department click here Education and Experience These abilities normally would be acquired through four years of increasingly responsible experience leading to journey-level skills in a mechanical or facilities/building trade, or any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Key Qualifications Prior experience at a similar higher education environment, government or a large multi-building facility environment is preferred. Experience using a computerized maintenance management system. Five years of verifiable employment experience performing work in one or more of the following trades Electrical field is preferred; technical trade school certification may substitute for one year of work experience. Licenses/ Certifications Required Valid California Driver’s License or the ability to obtain one within 10 days of hire. Compensation and Benefits Starting salary upon appointment is not expected to exceed $5,787 per month. Salary placement is determined by the education, experience, and qualifications the candidate brings to the position, internal equity, and the hiring department’s fiscal resources. CSU Classification Salary Range: $5,787 - $7,396 per month. Diversity and Community at SDSU At SDSU, our diversity gives us power and benefits every single member of our community. Through our commitment to equity and inclusion, we encourage all members of our community to purposefully learn from one another through open and respectful dialogue and responsible engagement. For more information, click here . Principles of Community At San Diego State University, we are a community of diverse individuals who have and represent many perspectives, beliefs and identities. This diversity lends our community strength, and we commit to creating and sustaining an inclusive and intellectually vibrant environment that benefits all members of our university. SDSU’s Principles of Community is an aspirational statement that is intended to evolve over time. The statement reflects the ideals we are encouraged to uphold in our interactions with one another. Supplemental Information Initial review of the required application materials, including cover letters and resumes, will begin on June 7, 2024. To receive full consideration, apply by June 6, 2024 The position will remain open until filled. The person holding this position is considered a ‘mandated reporter’ under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. San Diego State University is not a sponsoring agency for staff or management positions (e.g., H-1B visa). Applicants must currently be authorized to work in the United States on a full-time basis. Offers of employment are contingent upon the presentation of documents that demonstrate a person's identity and authorization to work in the United States, which are consistent with the provisions of the Immigration Reform and Control Act. A background check (including a criminal records check) must be completed satisfactorily and is required for employment. SDSU will make a conditional offer of employment, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current SDSU employee who was conditionally offered the position. SDSU is a smoke-free campus. For more information, please click here . SDSU is an Equal Opportunity Employer that considers all qualified candidates for employment and does not discriminate on the basis of race, religion, color, ancestry, age, disability, genetic information, gender, gender identity, gender expression, marital status, medical condition, national origin, sex, sexual orientation, covered military and veteran status, or any other protected characteristic or status. Reasonable accommodations will be provided for qualified applicants with disabilities who request an accommodation by contacting Michelle Puentes at mpuentes2@sdsu.edu . Advertised: May 24 2024 Pacific Daylight Time Applications close: Closing Date/Time:
Irvine Ranch Water District, CA
Irvine, California, United States
General Description ***There will be a 3.9% increase to the salary range for this position, effective July 1, 2024*** We are excited to announce that we are accepting applications for the position of Senior Maintenance Mechanic! The District Irvine Ranch Water District (IRWD) is a progressive, values-driven agency, with an international reputation for its leading-edge financial management practices, water recycling program, water use efficiency practices, water banking, urban runoff treatment, and energy generation and storage. Established in 1961 as a California Water District under the provisions of the California Water Code, IRWD is an independent special district serving central Orange County. IRWD provides high-quality drinking water, reliable sewage collection and treatment, ground-breaking recycled water programs, and environmentally sound urban runoff treatment to its customers. As an independent, not-for-profit public agency, IRWD is governed by a publicly elected five-member Board of Directors. The Board is responsible for the District's policies and decision-making. Day-to-day operations are supervised by the General Manager. Additional information can be found at the District's website: www.IRWD.com. The Position Irvine Ranch Water District is currently accepting applications for a Senior Maintenance Mechanic. The successful candidate will install, maintain and overhaul all District equipment related to domestic and reclaimed water distribution systems, sewage collection systems and wastewater treatment, and dewatering/solids handling. The ideal candidate is someone with Millwright mechanic skills, is self-motivated, a self-starter, who provides excellent customer service; focused on safety and maintaining professionalism; is detail oriented, dependable and flexible while using critical thinking skills to problem solve. Good pipefitting and production facilities experience is desired. Distinguishing Characteristics Positions at this level are distinguished from other classes within the series by the level of responsibility assumed and the complexity of the duties assigned. Employees perform the most difficult and responsible types of duties within the series including performing full range of maintenance, welding, fabrication, mechanical installations, operational duties, condition-based monitoring, mentoring, and leading lower level staff. Summary of Duties Perform the more complex journey level repairs, troubleshooting, and modifications of all water/wastewater/reclamation machinery and related appurtenances while providing training to sub-journey level personnel. Prepare reports, summarizing the District's mechanical maintenance functions including labor, work performed, and materials used. Provide feedback on work performed. Perform Predictive Maintenance/Machinery Condition Monitoring using computer-based machinery analyzer and exercise predictive diagnostic skills. Fabricate from raw and exotic stock utilizing machining and welding skills. Plan, implement and monitor non-routine mechanical related projects and tasks within the area of assigned responsibility. Assist in the implementation of assigned mechanical work tasks within the area of assigned responsibility. Install, dismantle, overhaul, and repair water/wastewater/reclamation machinery and equipment, including pumps, valves, engines, compressors, gear drive units, piping, conveyors, and related dewatering/solids handling/process equipment. Identify source(s) of existing or potential mechanical problems with systems, techniques, parts and equipment and work efficiently to correct, troubleshoot and diagnose various equipment malfunctions. Perform maintenance and repair operations using machinist skills required in Mechanical Services functions. Has thorough knowledge of machine shop and construction practices. Perform maintenance and repair operations using welding skills required in Mechanical Services functions. Possess knowledge and experience to properly and safely maintain District chemical, chlorination, and/or associated disinfection systems. Read and interpret blueprints, installation manuals, and follow written and verbal instructions. Ability to make rough drawings. Submit purchase requests for materials and tools. Monitor spare parts and daily expendables inventory. Assist in ensuring inventory is maintained at an acceptable level via purchase orders. Check shipments to ensure they are complete and correct, then administrate correct storage. Suggest changes in work plans, implement specific tasks and projects that are not normal operating procedures, and provide work-in-progress reports. Maintain records relating to equipment breakdowns and repair. Utilize Computerized Maintenance Management System for work orders and Oracle network system for purchasing. Assist in presenting department safety meetings. Responds to emergency situations during off-hours and required. Participates in standby duties at the sole discretion of the District. Comply with District safety work-related practices and attend relevant safety training. Qualifications Education: High school graduation or equivalent required. For degrees obtained outside of the U.S., an official equivalency evaluation is required. An accredited College Certificate in Mechanical/Electrical/Millwright/Welding or related Maintenance occupation is highly desirable. Associate's Degree is highly desirable. Experience: Four (4) years of journey-level experience in a job requiring the application of mechanical skills in a water/wastewater treatment plant, water distribution system or similar environment is required. Ability to operate all hand and power tools. License / Certifications: Valid Class 'C' California Driver's License required. May require Class 'A' California Driver's License, HAZMAT 1st Responder Certification, and/or Crane certification depending upon assignment. Grade II Mechanical Technologist Certificate issued by the California Water Environment Association desired. Grade III Mechanical Technologist Certificate issued by the California Water Environment Association highly desired. Completion of a formal Apprenticeship Program and/or Collections System Maintenance and Water Distribution Certifications are highly desired. Additional Information RWD Corporate Values Irvine Ranch Water District believes that its values drive the character, culture, and capacity of our organization. IRWD was built on values, and we weave them into the fabric of everything we do. Values are the ingredients in our recipe for both institutional and individual success. They are a code of conduct to promote positive outcomes for others and ourselves. They are more than words on a wall or a website. We live by them every day. We pledge to keep them relevant in an ever-changing world. IRWD's employees enjoy working in a safe, supportive, and nurturing environment where they form strong bonds with fellow employees. To ensure effective communication and promote a collaborative team environment, employees report to work each day in the office or in the field, depending on their positions. The physical and mental demands described below are representative of those that must be met by employees to successfully perform the essential functions of this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability and Interpersonal Communication Ability to effectively communicate both oral and written. Ability to communicate effectively with all levels of office/field employees, management and vendors. Represent District in a professional manner when dealing with outside suppliers and customers. Ability to advise and provide interpretation to others on how to apply policies, procedures and standards to specific situations. Mathematical Ability Ability to perform basic mathematical functions, including college level algebra and geometry. Must be able to perform dimension analysis, speed ratio computations, linear thermal expansion coefficiencies, BHP (Brake Horse Power) calculations, basic water math/hydraulic calculations and be familiar with the pump laws of affinity. Technology Ability Proficient in the use of MS Office Suite (Word, Excel). Keyboarding abilities sufficient to perform the job. Judgment and Situational Reasoning Ability Ability to use good personal judgment and discretion in performing all job functions. Ability to use functional reasoning in performing influence functions such as supervising, managing, leading, teaching, and directing. Physical Requirements Will lift 50 lbs. on a routine basis. Must be certified annually to wear respiratory equipment. Must be clean shaven such that facial hair does not interfere with the fit of self-contained breathing apparatus. Ability to exert moderately heavy physical effort in moderate to heavy work, typically involving some combination of climbing and balancing, stooping, kneeling, crouching, crawling, lifting, carrying, pushing, and pulling. Ability to operate heavy equipment and machinery with some requiring complex and rapid adjustments, such as power hand and shop tools, mechanic's hand tools, shovel, motor vehicles, compressors, hoists, ladders, drafting tools, etc. Environmental Adaptability Ability to work under sometimes uncomfortable conditions with exposure to environmental factors such as toxic agents, wildlife, disease, or equipment, traffic, or machinery. IRWD offers a comprehensive benefits package for eligible employees and their eligible dependents. These benefits include the following: retirement benefits; medical, dental, vision, and life insurance; anda variety of other benefits. Benefits may vary based on employment status. This benefits overview is intended to be a summary, is not intended to be all-inclusive,and may not be applicable to all employees. Retirement Employees hired on or after January 1, 2013: The District, in compliance with the California Public Employees' Pension Reform Act of 2012 (PEPRA), implemented a third tier for new employees hired on or after January 1, 2013. New employees hired on or after January 1, 2013 who have not been in PERS membership or in membership with a reciprocal retirement system within 6 months of hire date will receive benefits under the California Public Employees Retirement System at a 2 percent at age 62 formula. This formula gradually increases to a maximum benefits of 2.5 percent at age 67. Final compensation calculations will be based on the highest three-year average of regular recurring pay. The District pays the employer's share of these costs. The employee share of the pension cost of 7.50% is paid in full by the employees hired under this formula. Employees hired on or after September 29, 2012 or "Classic" PERS members hired on or after January 1, 2013: On September 24, 2012, the IRWD Board of Directors approved the addition of a second tier to the CalPERS retirement benefits. New employees hired on or after September 29th through December 31, 2012, and employees hired on or after January 1, 2013 who have been in PERS membership or in membership with a reciprocal retirement system, will receive benefits under the California Public Employees Retirement System at 2 percent at age 60 formula. This formula gradually increases to a maximum benefit of 2.418% at age 63. The District pays the employer share of these costs and the employee share of the pension cost of 7% is paid in full by the employees hired under this formula. Final retirement compensation calculations are based on the highest three-year average of regular, recurring pay. IRWDdoes not participate or pay into Social Security except for the Medicare portion. Medical Insurance IRWD contracts with CalPERS for medical insurance coverage. Employees may elect coverage from a variety of PPO and HMO plans. The employee and District contribution for health insurance varies by plan.Coverage is effective the first day of the month following the date of hire. Dental Insurance IRWD contracts with Delta Dental for dental coverage.IRWD pays 100% of the premium for dental coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Vision Insurance IRWD contracts with the EyeMed for vision coverage. IRWD pays 100% of the premium for vision coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Life Insurance Elgible employees are provided with life insurance coverage equal to three or four times their annual salary, depending on their level of compensation. Eligible dependents are also covered for a flat benefit amount. Coverage is effective the first day of the month following the date of hire. Deferred Compensation Participation in adeferred compensation plan is available through Empower Retirement. Enrollment is voluntary and contributions are employee-paid and subject to IRS limits. The District matches employee contributions up to 3% of base pay after 1 year of employment. Paid Vacation Eligible employees begin accruing vacation benefits at the rate of 80 hours per year for the first 5 years of employment and are eligible to use paid vacation time after 6 months of employment. Employees accrue 120 hours per year after 5 years of employment and 160 hours per year after 10 years of employment. Paid Holidays The District offers 11 scheduled paid holidaysplus one personal holiday per year. Sick Leave Eligible employees accrue 96 hours of sick leave annually. Flexible Spending Accounts Eligible employees may elect to participate in the District's Flex Advantage program. This program allows employees to deposit pre-tax dollars into special accounts to be used for a variety of purposes, including paying for qualified miscellaneous health care expenses and dependent care expenses. IRWD contracts with a third party administer to process payments from employee accounts using claim forms or a Flex Spending debit card. Educational Assistance The District will share in the pre-approved educational costs of tuition and books for employees who wish to attend college or take certification classes.
May 03, 2024
Full Time
General Description ***There will be a 3.9% increase to the salary range for this position, effective July 1, 2024*** We are excited to announce that we are accepting applications for the position of Senior Maintenance Mechanic! The District Irvine Ranch Water District (IRWD) is a progressive, values-driven agency, with an international reputation for its leading-edge financial management practices, water recycling program, water use efficiency practices, water banking, urban runoff treatment, and energy generation and storage. Established in 1961 as a California Water District under the provisions of the California Water Code, IRWD is an independent special district serving central Orange County. IRWD provides high-quality drinking water, reliable sewage collection and treatment, ground-breaking recycled water programs, and environmentally sound urban runoff treatment to its customers. As an independent, not-for-profit public agency, IRWD is governed by a publicly elected five-member Board of Directors. The Board is responsible for the District's policies and decision-making. Day-to-day operations are supervised by the General Manager. Additional information can be found at the District's website: www.IRWD.com. The Position Irvine Ranch Water District is currently accepting applications for a Senior Maintenance Mechanic. The successful candidate will install, maintain and overhaul all District equipment related to domestic and reclaimed water distribution systems, sewage collection systems and wastewater treatment, and dewatering/solids handling. The ideal candidate is someone with Millwright mechanic skills, is self-motivated, a self-starter, who provides excellent customer service; focused on safety and maintaining professionalism; is detail oriented, dependable and flexible while using critical thinking skills to problem solve. Good pipefitting and production facilities experience is desired. Distinguishing Characteristics Positions at this level are distinguished from other classes within the series by the level of responsibility assumed and the complexity of the duties assigned. Employees perform the most difficult and responsible types of duties within the series including performing full range of maintenance, welding, fabrication, mechanical installations, operational duties, condition-based monitoring, mentoring, and leading lower level staff. Summary of Duties Perform the more complex journey level repairs, troubleshooting, and modifications of all water/wastewater/reclamation machinery and related appurtenances while providing training to sub-journey level personnel. Prepare reports, summarizing the District's mechanical maintenance functions including labor, work performed, and materials used. Provide feedback on work performed. Perform Predictive Maintenance/Machinery Condition Monitoring using computer-based machinery analyzer and exercise predictive diagnostic skills. Fabricate from raw and exotic stock utilizing machining and welding skills. Plan, implement and monitor non-routine mechanical related projects and tasks within the area of assigned responsibility. Assist in the implementation of assigned mechanical work tasks within the area of assigned responsibility. Install, dismantle, overhaul, and repair water/wastewater/reclamation machinery and equipment, including pumps, valves, engines, compressors, gear drive units, piping, conveyors, and related dewatering/solids handling/process equipment. Identify source(s) of existing or potential mechanical problems with systems, techniques, parts and equipment and work efficiently to correct, troubleshoot and diagnose various equipment malfunctions. Perform maintenance and repair operations using machinist skills required in Mechanical Services functions. Has thorough knowledge of machine shop and construction practices. Perform maintenance and repair operations using welding skills required in Mechanical Services functions. Possess knowledge and experience to properly and safely maintain District chemical, chlorination, and/or associated disinfection systems. Read and interpret blueprints, installation manuals, and follow written and verbal instructions. Ability to make rough drawings. Submit purchase requests for materials and tools. Monitor spare parts and daily expendables inventory. Assist in ensuring inventory is maintained at an acceptable level via purchase orders. Check shipments to ensure they are complete and correct, then administrate correct storage. Suggest changes in work plans, implement specific tasks and projects that are not normal operating procedures, and provide work-in-progress reports. Maintain records relating to equipment breakdowns and repair. Utilize Computerized Maintenance Management System for work orders and Oracle network system for purchasing. Assist in presenting department safety meetings. Responds to emergency situations during off-hours and required. Participates in standby duties at the sole discretion of the District. Comply with District safety work-related practices and attend relevant safety training. Qualifications Education: High school graduation or equivalent required. For degrees obtained outside of the U.S., an official equivalency evaluation is required. An accredited College Certificate in Mechanical/Electrical/Millwright/Welding or related Maintenance occupation is highly desirable. Associate's Degree is highly desirable. Experience: Four (4) years of journey-level experience in a job requiring the application of mechanical skills in a water/wastewater treatment plant, water distribution system or similar environment is required. Ability to operate all hand and power tools. License / Certifications: Valid Class 'C' California Driver's License required. May require Class 'A' California Driver's License, HAZMAT 1st Responder Certification, and/or Crane certification depending upon assignment. Grade II Mechanical Technologist Certificate issued by the California Water Environment Association desired. Grade III Mechanical Technologist Certificate issued by the California Water Environment Association highly desired. Completion of a formal Apprenticeship Program and/or Collections System Maintenance and Water Distribution Certifications are highly desired. Additional Information RWD Corporate Values Irvine Ranch Water District believes that its values drive the character, culture, and capacity of our organization. IRWD was built on values, and we weave them into the fabric of everything we do. Values are the ingredients in our recipe for both institutional and individual success. They are a code of conduct to promote positive outcomes for others and ourselves. They are more than words on a wall or a website. We live by them every day. We pledge to keep them relevant in an ever-changing world. IRWD's employees enjoy working in a safe, supportive, and nurturing environment where they form strong bonds with fellow employees. To ensure effective communication and promote a collaborative team environment, employees report to work each day in the office or in the field, depending on their positions. The physical and mental demands described below are representative of those that must be met by employees to successfully perform the essential functions of this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability and Interpersonal Communication Ability to effectively communicate both oral and written. Ability to communicate effectively with all levels of office/field employees, management and vendors. Represent District in a professional manner when dealing with outside suppliers and customers. Ability to advise and provide interpretation to others on how to apply policies, procedures and standards to specific situations. Mathematical Ability Ability to perform basic mathematical functions, including college level algebra and geometry. Must be able to perform dimension analysis, speed ratio computations, linear thermal expansion coefficiencies, BHP (Brake Horse Power) calculations, basic water math/hydraulic calculations and be familiar with the pump laws of affinity. Technology Ability Proficient in the use of MS Office Suite (Word, Excel). Keyboarding abilities sufficient to perform the job. Judgment and Situational Reasoning Ability Ability to use good personal judgment and discretion in performing all job functions. Ability to use functional reasoning in performing influence functions such as supervising, managing, leading, teaching, and directing. Physical Requirements Will lift 50 lbs. on a routine basis. Must be certified annually to wear respiratory equipment. Must be clean shaven such that facial hair does not interfere with the fit of self-contained breathing apparatus. Ability to exert moderately heavy physical effort in moderate to heavy work, typically involving some combination of climbing and balancing, stooping, kneeling, crouching, crawling, lifting, carrying, pushing, and pulling. Ability to operate heavy equipment and machinery with some requiring complex and rapid adjustments, such as power hand and shop tools, mechanic's hand tools, shovel, motor vehicles, compressors, hoists, ladders, drafting tools, etc. Environmental Adaptability Ability to work under sometimes uncomfortable conditions with exposure to environmental factors such as toxic agents, wildlife, disease, or equipment, traffic, or machinery. IRWD offers a comprehensive benefits package for eligible employees and their eligible dependents. These benefits include the following: retirement benefits; medical, dental, vision, and life insurance; anda variety of other benefits. Benefits may vary based on employment status. This benefits overview is intended to be a summary, is not intended to be all-inclusive,and may not be applicable to all employees. Retirement Employees hired on or after January 1, 2013: The District, in compliance with the California Public Employees' Pension Reform Act of 2012 (PEPRA), implemented a third tier for new employees hired on or after January 1, 2013. New employees hired on or after January 1, 2013 who have not been in PERS membership or in membership with a reciprocal retirement system within 6 months of hire date will receive benefits under the California Public Employees Retirement System at a 2 percent at age 62 formula. This formula gradually increases to a maximum benefits of 2.5 percent at age 67. Final compensation calculations will be based on the highest three-year average of regular recurring pay. The District pays the employer's share of these costs. The employee share of the pension cost of 7.50% is paid in full by the employees hired under this formula. Employees hired on or after September 29, 2012 or "Classic" PERS members hired on or after January 1, 2013: On September 24, 2012, the IRWD Board of Directors approved the addition of a second tier to the CalPERS retirement benefits. New employees hired on or after September 29th through December 31, 2012, and employees hired on or after January 1, 2013 who have been in PERS membership or in membership with a reciprocal retirement system, will receive benefits under the California Public Employees Retirement System at 2 percent at age 60 formula. This formula gradually increases to a maximum benefit of 2.418% at age 63. The District pays the employer share of these costs and the employee share of the pension cost of 7% is paid in full by the employees hired under this formula. Final retirement compensation calculations are based on the highest three-year average of regular, recurring pay. IRWDdoes not participate or pay into Social Security except for the Medicare portion. Medical Insurance IRWD contracts with CalPERS for medical insurance coverage. Employees may elect coverage from a variety of PPO and HMO plans. The employee and District contribution for health insurance varies by plan.Coverage is effective the first day of the month following the date of hire. Dental Insurance IRWD contracts with Delta Dental for dental coverage.IRWD pays 100% of the premium for dental coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Vision Insurance IRWD contracts with the EyeMed for vision coverage. IRWD pays 100% of the premium for vision coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Life Insurance Elgible employees are provided with life insurance coverage equal to three or four times their annual salary, depending on their level of compensation. Eligible dependents are also covered for a flat benefit amount. Coverage is effective the first day of the month following the date of hire. Deferred Compensation Participation in adeferred compensation plan is available through Empower Retirement. Enrollment is voluntary and contributions are employee-paid and subject to IRS limits. The District matches employee contributions up to 3% of base pay after 1 year of employment. Paid Vacation Eligible employees begin accruing vacation benefits at the rate of 80 hours per year for the first 5 years of employment and are eligible to use paid vacation time after 6 months of employment. Employees accrue 120 hours per year after 5 years of employment and 160 hours per year after 10 years of employment. Paid Holidays The District offers 11 scheduled paid holidaysplus one personal holiday per year. Sick Leave Eligible employees accrue 96 hours of sick leave annually. Flexible Spending Accounts Eligible employees may elect to participate in the District's Flex Advantage program. This program allows employees to deposit pre-tax dollars into special accounts to be used for a variety of purposes, including paying for qualified miscellaneous health care expenses and dependent care expenses. IRWD contracts with a third party administer to process payments from employee accounts using claim forms or a Flex Spending debit card. Educational Assistance The District will share in the pre-approved educational costs of tuition and books for employees who wish to attend college or take certification classes.
CITY OF INGLEWOOD, CA
Inglewood, California, United States
Applications will be accepted online at www.Cityofinglewood.org/jobs.aspx until a sufficient number of qualified applications have been received. Resumes are accepted but not in place of the official city employment application. Proof of education requirements/certifications must be submitted as a PDF via EMAIL to human_resources@cityofinglewood.org with the SUBJECT LINE: your name and job title applying for. Incomplete applications will be automatically rejected. POSITION: Under supervision, troubleshoots, maintains, and repairs various light, medium, and heavy-duty City vehicles and equipment and assists other mechanics as needed. JOB TASKS Equipment and vehicles to service: As assigned by the Superintendent or designee, repairs automobiles, police cars, police motorcycles, sweepers, graders, rollers, trucks, and other heavy and specialized equipment. Will also repair the same units as Mechanic I, when necessary. Inspects, diagnoses, repairs, overhauls, and replaces systems and components, including but not limited to brakes, engine transmissions, air conditioning, exhaust, and electrical systems, diesel, gasoline, and alternative fueling systems (e.g., Compressed Natural Gas [CNG], propane, and bio-fuel), hybrid and electric drive systems, emissions; automotive and truck hydraulic systems; and related computer-controlled components; Conducts vehicle safety inspection and performs routine and preventive maintenance on vehicles and various equipment; Inputs data for electronic documentation and records of repairs and maintenance to include maintaining and assisting in maintaining parts inventory; Responds to road calls and performs on-site diagnostics and repairs on vehicles and equipment. Fabricates and installs a variety of parts and equipment and performs minor welding; Maintains and cleans tools and work areas and disposes of hazardous waste following City guidelines; Keeps current with new technology and participates in various training activities. Follows applicable safety rules and regulations and performs other job-related duties as assigned. Provides technical assistance and instruction to other mechanics as needed. QUALIFICATIONS Possession of Automotive Service Excellence (ASE) Certificates A-1 thru A-9, Alternate Fuels Technician (Test F1), and maintain a valid California Class B Driver License AND three years’ professional work experience as an automotive/equipment Mechanic performing light, medium, and heavy-duty vehicle repair to include working on emergency vehicles. Knowledgeable of fuel systems, emission control, gasoline, natural gas, and diesel engines, electrical systems, automotive and truck hydraulic systems, drivetrains, brake systems and air conditioning systems, lubrication, and preventive maintenance and repair procedures; Skilled in the proper and safe use of tools and equipment, including electronic diagnostic tools, handling and disposing of hazardous waste, troubleshooting and repairing vehicles in an efficient and timely manner, conducting safety inspections, and maintaining a wide range of equipment and emergency vehicles, and in establishing and maintaining cooperative working relationships with City employees and vendors; Ability to perform heavy physical labor and work in cramped, close-quarter environments, lift, carry, and move objects up to 70 lbs, complete and maintain logs and records accurately, learn and use required computer software applications, follow and provide written and oral instructions, and work independently and as a team. WORK ENVIRONMENT AND PHYSICAL REQUIREMENTS Work is performed in outdoor and service garage environments. Work may require frequent standing, walking, bending, and lifting 70 pounds. Incumbents may be exposed to repetitive motion, moving automotive parts, traffic, hazardous fumes, and chemicals. THE SELECTION PROCESS: The examination process consists of one or more of the following: (1) Training and Experience Evaluation, (2) a Written Exam, and (3) a Qualifications Appraisal Interview with a panel of subject matter experts. Candidates must receive a 70-100 to have their names on the active eligibility list for one year. The top three ranks on the Eligibility List will have their application materials forwarded to the hiring authority for a selection interview. Applicants whose experience best meets the City’s needs will be invited to participate in the examination process for this position. Candidates must have access to a computer with internet, video, and audio capabilities to participate in our examination process. The City of Inglewood is an Equal Opportunity Employer. It does not discriminate based on age, sex, race, religion, national origin, marital status, or handicap status in its employment actions, decisions, policies, and practice.
Jun 11, 2024
Applications will be accepted online at www.Cityofinglewood.org/jobs.aspx until a sufficient number of qualified applications have been received. Resumes are accepted but not in place of the official city employment application. Proof of education requirements/certifications must be submitted as a PDF via EMAIL to human_resources@cityofinglewood.org with the SUBJECT LINE: your name and job title applying for. Incomplete applications will be automatically rejected. POSITION: Under supervision, troubleshoots, maintains, and repairs various light, medium, and heavy-duty City vehicles and equipment and assists other mechanics as needed. JOB TASKS Equipment and vehicles to service: As assigned by the Superintendent or designee, repairs automobiles, police cars, police motorcycles, sweepers, graders, rollers, trucks, and other heavy and specialized equipment. Will also repair the same units as Mechanic I, when necessary. Inspects, diagnoses, repairs, overhauls, and replaces systems and components, including but not limited to brakes, engine transmissions, air conditioning, exhaust, and electrical systems, diesel, gasoline, and alternative fueling systems (e.g., Compressed Natural Gas [CNG], propane, and bio-fuel), hybrid and electric drive systems, emissions; automotive and truck hydraulic systems; and related computer-controlled components; Conducts vehicle safety inspection and performs routine and preventive maintenance on vehicles and various equipment; Inputs data for electronic documentation and records of repairs and maintenance to include maintaining and assisting in maintaining parts inventory; Responds to road calls and performs on-site diagnostics and repairs on vehicles and equipment. Fabricates and installs a variety of parts and equipment and performs minor welding; Maintains and cleans tools and work areas and disposes of hazardous waste following City guidelines; Keeps current with new technology and participates in various training activities. Follows applicable safety rules and regulations and performs other job-related duties as assigned. Provides technical assistance and instruction to other mechanics as needed. QUALIFICATIONS Possession of Automotive Service Excellence (ASE) Certificates A-1 thru A-9, Alternate Fuels Technician (Test F1), and maintain a valid California Class B Driver License AND three years’ professional work experience as an automotive/equipment Mechanic performing light, medium, and heavy-duty vehicle repair to include working on emergency vehicles. Knowledgeable of fuel systems, emission control, gasoline, natural gas, and diesel engines, electrical systems, automotive and truck hydraulic systems, drivetrains, brake systems and air conditioning systems, lubrication, and preventive maintenance and repair procedures; Skilled in the proper and safe use of tools and equipment, including electronic diagnostic tools, handling and disposing of hazardous waste, troubleshooting and repairing vehicles in an efficient and timely manner, conducting safety inspections, and maintaining a wide range of equipment and emergency vehicles, and in establishing and maintaining cooperative working relationships with City employees and vendors; Ability to perform heavy physical labor and work in cramped, close-quarter environments, lift, carry, and move objects up to 70 lbs, complete and maintain logs and records accurately, learn and use required computer software applications, follow and provide written and oral instructions, and work independently and as a team. WORK ENVIRONMENT AND PHYSICAL REQUIREMENTS Work is performed in outdoor and service garage environments. Work may require frequent standing, walking, bending, and lifting 70 pounds. Incumbents may be exposed to repetitive motion, moving automotive parts, traffic, hazardous fumes, and chemicals. THE SELECTION PROCESS: The examination process consists of one or more of the following: (1) Training and Experience Evaluation, (2) a Written Exam, and (3) a Qualifications Appraisal Interview with a panel of subject matter experts. Candidates must receive a 70-100 to have their names on the active eligibility list for one year. The top three ranks on the Eligibility List will have their application materials forwarded to the hiring authority for a selection interview. Applicants whose experience best meets the City’s needs will be invited to participate in the examination process for this position. Candidates must have access to a computer with internet, video, and audio capabilities to participate in our examination process. The City of Inglewood is an Equal Opportunity Employer. It does not discriminate based on age, sex, race, religion, national origin, marital status, or handicap status in its employment actions, decisions, policies, and practice.
CITY OF INGLEWOOD, CA
Inglewood, California, United States
Applications will be accepted online at www.Cityofinglewood.org/jobs.aspx until a sufficient number of qualified applications have been received. Resumes are accepted but not in place of the official city employment application. Proof of education requirements/certifications must be submitted as a PDF via EMAIL to human_resources@cityofinglewood.org with the SUBJECT LINE: your name and job title applying for. Incomplete applications will be automatically rejected. POSITION: Under close supervision, troubleshoots maintains and repairs light transportation, construction, mechanical, emergency equipment, and passenger vehicles, including many vehicles operating on compressed natural gas (CNG). JOB TASKS Equipment and vehicles to service: As assigned by the Superintendent or designee, light vehicles and equipment, agriculture equipment, small construction units, trailers, emergency equipment, passenger vehicles, forklifts, weed Wacker’s, edger’s, lawn mowers, ATV’s, chippers, concrete saws, power washers, tampers, chain saws, including vehicles operating on compressed natural gas (CNG), hybrids & electric vehicles, light duty trucks, vans, and SUV’s from ¼ ton to 1 ton. Inspects, diagnoses, repairs, overhauls, and replaces systems and components, including but not limited to: brakes, engines transmissions, air conditioning, exhaust, and electrical systems, diesel, gasoline, and alternative fueling systems (e.g., Compressed Natural Gas [CNG], propane, and bio-fuel), hybrid and electric drive systems, emissions; automotive and truck hydraulic systems; and related computer-controlled components; Conducts vehicle safety inspection and performs routine and preventive maintenance on vehicles and various equipment; Inputs data for electronic documentation and records of repairs and maintenance to include maintaining and assisting in maintaining parts inventory; Performs all tire maintenance functions, including dismounting, repairing, remounting, and balancing of various tires in service on City equipment; Responds to road calls and performs on-site diagnostics and repairs on vehicles and equipment. Fabricates and installs a variety of parts and equipment and performs minor welding; Maintains and cleans tools and work areas and disposes of the hazardous waste following City guidelines; Keeps current with new technology and participates in various training activities. Follows applicable safety rules and regulations and performs other job-related duties as assigned. QUALIFICATIONS Possession of Automotive Service Excellence (ASE) certificates A-1, A-5, A-6, A-7, & A-8 a valid California Class B driver license. Possessing ASE certification as an Alternate Fuels Technician (Test F-1) is desirable AND one year of professional work experience as an automotive/equipment mechanic performing light vehicle repairs. Knowledgeable of fuel systems, emission control, gasoline, natural gas, and diesel engines, electrical systems, automotive and truck hydraulic systems, drivetrains, brake systems and air conditioning systems, lubrication and preventive maintenance and repair procedures; Skilled in the proper and safe use of tools and equipment including electronic diagnostic tools, handling and disposing of hazardous waste, troubleshooting and repairing vehicles in an efficient and timely manner, conducting safety inspections and maintaining a wide range of equipment and emergency vehicles, and in establishing and maintaining cooperative working relationships with City employees and vendors; Ability to perform heavy physical labor and work in cramped, close-quarter environments, lift, carry and move objects up to 70lbs complete and maintain logs and records accurately, learn and use required computer software applications, follow written and oral instructions, and work independently and as a team as needed. Proficient in operating office equipment, including computers and software, fax machines, copiers, scanners, and other specialized equipment, MS Office software packages, and other industry-related software. WORK ENVIRONMENT AND PHYSICAL REQUIREMENTS Work is performed in outdoor and service garage environments. Work may require frequent standing, walking, bending, and lifting 70 pounds. Incumbents may be exposed to repetitive motion, moving automotive parts, traffic, hazardous fumes, and chemicals. THE SELECTION PROCESS: The examination process consists of one or more of the following: (1) Training and Experience Evaluation, (2) a Written Exam, and (3) a Qualifications Appraisal Interview with a panel of subject matter experts. Candidates must receive a 70-100 to have their names on the active eligibility list for one year. The top three ranks on the Eligibility List will have their application materials forwarded to the hiring authority for a selection interview. Applicants whose experience best meets the City’s needs will be invited to participate in the examination process for this position. Candidates must have access to a computer with internet, video, and audio capabilities to participate in our examination process. The City of Inglewood is an Equal Opportunity Employer. It does not discriminate based on age, sex, race, religion, national origin, marital status, or handicap status in its employment actions, decisions, policies, and practice.
Jun 11, 2024
Applications will be accepted online at www.Cityofinglewood.org/jobs.aspx until a sufficient number of qualified applications have been received. Resumes are accepted but not in place of the official city employment application. Proof of education requirements/certifications must be submitted as a PDF via EMAIL to human_resources@cityofinglewood.org with the SUBJECT LINE: your name and job title applying for. Incomplete applications will be automatically rejected. POSITION: Under close supervision, troubleshoots maintains and repairs light transportation, construction, mechanical, emergency equipment, and passenger vehicles, including many vehicles operating on compressed natural gas (CNG). JOB TASKS Equipment and vehicles to service: As assigned by the Superintendent or designee, light vehicles and equipment, agriculture equipment, small construction units, trailers, emergency equipment, passenger vehicles, forklifts, weed Wacker’s, edger’s, lawn mowers, ATV’s, chippers, concrete saws, power washers, tampers, chain saws, including vehicles operating on compressed natural gas (CNG), hybrids & electric vehicles, light duty trucks, vans, and SUV’s from ¼ ton to 1 ton. Inspects, diagnoses, repairs, overhauls, and replaces systems and components, including but not limited to: brakes, engines transmissions, air conditioning, exhaust, and electrical systems, diesel, gasoline, and alternative fueling systems (e.g., Compressed Natural Gas [CNG], propane, and bio-fuel), hybrid and electric drive systems, emissions; automotive and truck hydraulic systems; and related computer-controlled components; Conducts vehicle safety inspection and performs routine and preventive maintenance on vehicles and various equipment; Inputs data for electronic documentation and records of repairs and maintenance to include maintaining and assisting in maintaining parts inventory; Performs all tire maintenance functions, including dismounting, repairing, remounting, and balancing of various tires in service on City equipment; Responds to road calls and performs on-site diagnostics and repairs on vehicles and equipment. Fabricates and installs a variety of parts and equipment and performs minor welding; Maintains and cleans tools and work areas and disposes of the hazardous waste following City guidelines; Keeps current with new technology and participates in various training activities. Follows applicable safety rules and regulations and performs other job-related duties as assigned. QUALIFICATIONS Possession of Automotive Service Excellence (ASE) certificates A-1, A-5, A-6, A-7, & A-8 a valid California Class B driver license. Possessing ASE certification as an Alternate Fuels Technician (Test F-1) is desirable AND one year of professional work experience as an automotive/equipment mechanic performing light vehicle repairs. Knowledgeable of fuel systems, emission control, gasoline, natural gas, and diesel engines, electrical systems, automotive and truck hydraulic systems, drivetrains, brake systems and air conditioning systems, lubrication and preventive maintenance and repair procedures; Skilled in the proper and safe use of tools and equipment including electronic diagnostic tools, handling and disposing of hazardous waste, troubleshooting and repairing vehicles in an efficient and timely manner, conducting safety inspections and maintaining a wide range of equipment and emergency vehicles, and in establishing and maintaining cooperative working relationships with City employees and vendors; Ability to perform heavy physical labor and work in cramped, close-quarter environments, lift, carry and move objects up to 70lbs complete and maintain logs and records accurately, learn and use required computer software applications, follow written and oral instructions, and work independently and as a team as needed. Proficient in operating office equipment, including computers and software, fax machines, copiers, scanners, and other specialized equipment, MS Office software packages, and other industry-related software. WORK ENVIRONMENT AND PHYSICAL REQUIREMENTS Work is performed in outdoor and service garage environments. Work may require frequent standing, walking, bending, and lifting 70 pounds. Incumbents may be exposed to repetitive motion, moving automotive parts, traffic, hazardous fumes, and chemicals. THE SELECTION PROCESS: The examination process consists of one or more of the following: (1) Training and Experience Evaluation, (2) a Written Exam, and (3) a Qualifications Appraisal Interview with a panel of subject matter experts. Candidates must receive a 70-100 to have their names on the active eligibility list for one year. The top three ranks on the Eligibility List will have their application materials forwarded to the hiring authority for a selection interview. Applicants whose experience best meets the City’s needs will be invited to participate in the examination process for this position. Candidates must have access to a computer with internet, video, and audio capabilities to participate in our examination process. The City of Inglewood is an Equal Opportunity Employer. It does not discriminate based on age, sex, race, religion, national origin, marital status, or handicap status in its employment actions, decisions, policies, and practice.
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
Posting Open Until Filled Salary Range: $35,350 - $44,241 GENERAL DESCRIPTION AND CLASSIFIACTION STANDARDS Maintains assigned City of Atlanta facilities to maximize operational performance and reduce equipment operating costs. Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility. On call for after-hour facility emergencies. SUPERVISION RECEIVED Works under the direction of the Facilities Maintenance Supervisor. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned facility tasks. ESSENTIAL DUTIES & RESPONSIBILITIES Performs scheduled preventive, predictive, corrective and reactive maintenance on facility assets as assigned. Leads continuous improvement activities. Participates in Root-Cause Analysis activities. Utilizes Computerized Maintenance Management System (CMMS) to document work orders and maintain work history. Performs general repairs and maintenance not limited to: Repairs or adjusts doors, carpentry, painting, replacing light bulbs or fixtures, repairs to plumbing/pipes/sinks, and HVAC. Organizes daily work routine; establishes priorities for the completion of work in accordance with facility needs. Utilizes experience to lead in developing standards/work procedures while performing those duties and provides work order feedback on discrepancies as noted during service delivery. Uses a variety of hand-powered and shop tools. Complies with safety regulations and maintains clean and orderly work areas. Helps and trains new personnel on equipment operation. Performs all duties with a strong and diligent focus on safety and quality. Responds to customer requests and complaints in a timely and appropriate manner; identifies and records needs or problems and determines best approach to resolve situation following departmental guidelines. Responds to emergency situations during and after hours for the purpose of resolving immediate safety/operational concerns. Participates in meetings, workshops, training, and seminars, as assigned for the purpose of conveying and/or gathering information required to perform job functions. MINIMUNM QUALIFICATIONS A high school diploma Five plus (5+) years of experience in building repairs and maintenance. Trade proficiency in basic plumbing, simple electrical, carpentry, drywall, tile, flooring, painting, miscellaneous repairs and maintenance. Must have a valid Georgia Driver's license PREFERRED QUALIFICATIONS Building Operators Certification (BOC) Building Owners and Managers Association (BOMA) Certification International Facility Management Association (IFMA) Certification HVAC Certification PHYSICAL REQUIREMENTS Frequent standing & walking; occasional sitting; Physical demands may vary depending on assigned work area and work tasks. Carrying of objects up to 35 lbs; The ability to lift 50 pounds and bending, k neeling, stooping, and twisting, is frequently required.
May 17, 2024
Full Time
Posting Open Until Filled Salary Range: $35,350 - $44,241 GENERAL DESCRIPTION AND CLASSIFIACTION STANDARDS Maintains assigned City of Atlanta facilities to maximize operational performance and reduce equipment operating costs. Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility. On call for after-hour facility emergencies. SUPERVISION RECEIVED Works under the direction of the Facilities Maintenance Supervisor. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned facility tasks. ESSENTIAL DUTIES & RESPONSIBILITIES Performs scheduled preventive, predictive, corrective and reactive maintenance on facility assets as assigned. Leads continuous improvement activities. Participates in Root-Cause Analysis activities. Utilizes Computerized Maintenance Management System (CMMS) to document work orders and maintain work history. Performs general repairs and maintenance not limited to: Repairs or adjusts doors, carpentry, painting, replacing light bulbs or fixtures, repairs to plumbing/pipes/sinks, and HVAC. Organizes daily work routine; establishes priorities for the completion of work in accordance with facility needs. Utilizes experience to lead in developing standards/work procedures while performing those duties and provides work order feedback on discrepancies as noted during service delivery. Uses a variety of hand-powered and shop tools. Complies with safety regulations and maintains clean and orderly work areas. Helps and trains new personnel on equipment operation. Performs all duties with a strong and diligent focus on safety and quality. Responds to customer requests and complaints in a timely and appropriate manner; identifies and records needs or problems and determines best approach to resolve situation following departmental guidelines. Responds to emergency situations during and after hours for the purpose of resolving immediate safety/operational concerns. Participates in meetings, workshops, training, and seminars, as assigned for the purpose of conveying and/or gathering information required to perform job functions. MINIMUNM QUALIFICATIONS A high school diploma Five plus (5+) years of experience in building repairs and maintenance. Trade proficiency in basic plumbing, simple electrical, carpentry, drywall, tile, flooring, painting, miscellaneous repairs and maintenance. Must have a valid Georgia Driver's license PREFERRED QUALIFICATIONS Building Operators Certification (BOC) Building Owners and Managers Association (BOMA) Certification International Facility Management Association (IFMA) Certification HVAC Certification PHYSICAL REQUIREMENTS Frequent standing & walking; occasional sitting; Physical demands may vary depending on assigned work area and work tasks. Carrying of objects up to 35 lbs; The ability to lift 50 pounds and bending, k neeling, stooping, and twisting, is frequently required.
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $18.23/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications: High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
Mar 08, 2024
Full Time
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $18.23/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications: High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
CITY OF ATLANTA, GA
College Park, Georgia, United States
General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. Other duties may be assigned. Follow assigned instructions and task of Supervisor and or Lead Mechanic. Attend all assigned and or required training. Work daily with and in CMMS system. FOD / Trash removal airport wide Maintains airport grounds using both non-motorized and motorized equipment such as weed eaters, chain saws, blowers, mowers, sprayers etc. Conduct daily inspections of vehicles and ground equipment. Maintain airport grounds using tractors with decks, zero turns, remote control mowers skid steers, etc. Maintain airfield and roadways using sweepers, blowers, snow and ice equipment, dump trucks, etc. Maintain airport / airfield storm drains with use of vector truck and jetter Use commercial grade vehicles to assist with airfield and roadway / pavement repairs and snow and ice removal. Make repairs to SIDA and perimeter fence. Make repairs to pavement and concrete on airport properties including airfield. Maintain roadway and ramp area markings Knowledge Landscaping and landscaping equipment. Storm drains Pavement and pavement repair Airfield and roadway markings Snow and ice removal Minimum Qualifications and Experience 5+ years landscaping Commercial grade equipment operator Heavy Equipment operator Must have computer skills and knowledge of software programs such as a CMMS, Microsoft Word, Outlook, Excel, etc. Preferred Qualifications and Experience 7+ years landscaping Education / Certifications High school diploma or General Equivalency Diploma (GED). Trade / Technical school or higher - Preferred Licensures CDL Class B Airfield Movement Area - AMA (Internal) CDL Class A preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job.
May 11, 2024
Full Time
General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. Other duties may be assigned. Follow assigned instructions and task of Supervisor and or Lead Mechanic. Attend all assigned and or required training. Work daily with and in CMMS system. FOD / Trash removal airport wide Maintains airport grounds using both non-motorized and motorized equipment such as weed eaters, chain saws, blowers, mowers, sprayers etc. Conduct daily inspections of vehicles and ground equipment. Maintain airport grounds using tractors with decks, zero turns, remote control mowers skid steers, etc. Maintain airfield and roadways using sweepers, blowers, snow and ice equipment, dump trucks, etc. Maintain airport / airfield storm drains with use of vector truck and jetter Use commercial grade vehicles to assist with airfield and roadway / pavement repairs and snow and ice removal. Make repairs to SIDA and perimeter fence. Make repairs to pavement and concrete on airport properties including airfield. Maintain roadway and ramp area markings Knowledge Landscaping and landscaping equipment. Storm drains Pavement and pavement repair Airfield and roadway markings Snow and ice removal Minimum Qualifications and Experience 5+ years landscaping Commercial grade equipment operator Heavy Equipment operator Must have computer skills and knowledge of software programs such as a CMMS, Microsoft Word, Outlook, Excel, etc. Preferred Qualifications and Experience 7+ years landscaping Education / Certifications High school diploma or General Equivalency Diploma (GED). Trade / Technical school or higher - Preferred Licensures CDL Class B Airfield Movement Area - AMA (Internal) CDL Class A preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job.
City of Kansas City, MO
Kansas City, Missouri, United States
Several full-time positions available with the Parks & Recreation Department, Park Facility Maintenance located at 3515 NE 33rd Terr and the Water Department, Wastewater Treatment Division located at 7300 Hawthorne Road Salary Range: $22.61-$34.48/hour Normal Work Days/Hours: Parks: Monday - Friday 7:00 a.m.-3:30 p.m., Water: Monday-Friday, 6:30 a.m.-3:00 p.m. Application Deadline Date: Open Until Filled Responsibilities Parks: Performs maintenance on facilities including community centers, pools, fountains, cultural & nature centers, and museums. Inspects, repairs, and maintains boilers, hot water tanks, air compressors, HVAC equipment, water supply lines, plumbing fixtures, motors and related equipment. Repairs or replaces piping, valves, and other worn or damaged parts. Replaces packing and bearings on pumps. Performs remodeling duties including framing and installation of drywall, installation of electrical fixtures and wiring, and installation of plumbing fixtures and water lines. Assists in operation of snow removal equipment. Performs fire alarm and sprinkler system inspections. Responds to alarm activation for system check. Performs preventative maintenance tasks on various systems and buildings. Maintains work area in safe and organized manner. Water: Inspects, maintains, repairs, and troubleshoots equipment within the Wastewater Treatment Division. Multiple positions involve the performance of a variety of different maintenance jobs including pump repair and installations, gate and valve repair, welding, seal water systems, plumbing repairs, rigging, fabrication and troubleshooting or, carpentry, plumbing repair, and drainage systems. Performs construction, performing snow removal, equipment operation or, HVAC repair maintenance, service and installations, or boiler maintenance. Uses knowledge of computers and possesses the ability to read blueprints. Understands the importance of proper safety habits and knowledge of "lock out & tag out", and PPE Qualifications REQUIRES high school graduation and 4 years of experience in a variety of mechanical crafts; OR an equivalent combination of qualifying education and experience. Must possess a valid state-issued driver's license in accordance with City of KCMO policies. May be required to obtain a valid MO Class A, B, or C CDL prior to the end of the probationary period as determined by the department. Must pass a pre-employment drug screen and post-offer physical examination as prescribed by the City. Other Information URGENT!!! CRITICAL RECRUITMENT INFORMATION QUESTIONS REGARDING AVIATION POSITIONS SHOULD BE DIRECTED TO THE AVIATION DEPARTMENT AT 816-243-3010. Applications and/or resumes are evaluated on the information received by the application deadline. Please ensure that your application or resume clearly demonstrates how you meet the minimum qualifications for the position for which you are applying, this includes providing all relevant educational dates and a detailed description of relevant work experience, including months/years of employment. Applications and/or resumes may not be considered if information is incomplete. In order for a resume to be used in lieu of an application the resume must have been submitted online via the City's Applicant Tracking System. Positions requiring a high school diploma/GED certificate must be obtained from a school/program accredited by the Department of Education and recognized by the U.S. Secretary of Education. The minimum education requirement for positions that allow for experience equivalency for an accredited degree is a high school diploma. Unless otherwise specified, an accredited degree must be obtained from a college or university listed with the U.S. Department of Education and recognized by the U.S. Secretary of Education. For positions with a salary grade of EX6 or higher that require an accredited degree, qualifying professional experience must be obtained AFTER the accredited degree is obtained. Successful completion of a pre-employment criminal history/background check is required for all positions. Some positions require a post offer drug screen and/or physical. If appointed, non-residents must obtain residency inside Kansas City, Missouri's city limits within nine months. The City of KCMO is an equal opportunity employer that values diversity and inclusion in the workplace. The City is committed to providing a workplace environment for its employees and citizens free from discrimination based on race, color, sex (including pregnancy), national origin, religion, age, disability, marital status, genetic information, sexual orientation, or gender identity. For more information, please see our EEO Policy The City of KCMO is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call 816-513-1908 or send an e-mail to accommodations@kcmo.org . If claiming military veterans' preference points, you must attach a copy of your DD-214 or a DD-256 (for reservists). To claim veterans' points you must have served 180 days of regular active duty service and be discharged or released under honorable conditions during peacetimes or 90 days of active duty service, one (1) day during "wartime" and a last discharge or release under honorable conditions. (DOD) 38 U.S. Code • 4211).
Mar 08, 2024
Full Time
Several full-time positions available with the Parks & Recreation Department, Park Facility Maintenance located at 3515 NE 33rd Terr and the Water Department, Wastewater Treatment Division located at 7300 Hawthorne Road Salary Range: $22.61-$34.48/hour Normal Work Days/Hours: Parks: Monday - Friday 7:00 a.m.-3:30 p.m., Water: Monday-Friday, 6:30 a.m.-3:00 p.m. Application Deadline Date: Open Until Filled Responsibilities Parks: Performs maintenance on facilities including community centers, pools, fountains, cultural & nature centers, and museums. Inspects, repairs, and maintains boilers, hot water tanks, air compressors, HVAC equipment, water supply lines, plumbing fixtures, motors and related equipment. Repairs or replaces piping, valves, and other worn or damaged parts. Replaces packing and bearings on pumps. Performs remodeling duties including framing and installation of drywall, installation of electrical fixtures and wiring, and installation of plumbing fixtures and water lines. Assists in operation of snow removal equipment. Performs fire alarm and sprinkler system inspections. Responds to alarm activation for system check. Performs preventative maintenance tasks on various systems and buildings. Maintains work area in safe and organized manner. Water: Inspects, maintains, repairs, and troubleshoots equipment within the Wastewater Treatment Division. Multiple positions involve the performance of a variety of different maintenance jobs including pump repair and installations, gate and valve repair, welding, seal water systems, plumbing repairs, rigging, fabrication and troubleshooting or, carpentry, plumbing repair, and drainage systems. Performs construction, performing snow removal, equipment operation or, HVAC repair maintenance, service and installations, or boiler maintenance. Uses knowledge of computers and possesses the ability to read blueprints. Understands the importance of proper safety habits and knowledge of "lock out & tag out", and PPE Qualifications REQUIRES high school graduation and 4 years of experience in a variety of mechanical crafts; OR an equivalent combination of qualifying education and experience. Must possess a valid state-issued driver's license in accordance with City of KCMO policies. May be required to obtain a valid MO Class A, B, or C CDL prior to the end of the probationary period as determined by the department. Must pass a pre-employment drug screen and post-offer physical examination as prescribed by the City. Other Information URGENT!!! CRITICAL RECRUITMENT INFORMATION QUESTIONS REGARDING AVIATION POSITIONS SHOULD BE DIRECTED TO THE AVIATION DEPARTMENT AT 816-243-3010. Applications and/or resumes are evaluated on the information received by the application deadline. Please ensure that your application or resume clearly demonstrates how you meet the minimum qualifications for the position for which you are applying, this includes providing all relevant educational dates and a detailed description of relevant work experience, including months/years of employment. Applications and/or resumes may not be considered if information is incomplete. In order for a resume to be used in lieu of an application the resume must have been submitted online via the City's Applicant Tracking System. Positions requiring a high school diploma/GED certificate must be obtained from a school/program accredited by the Department of Education and recognized by the U.S. Secretary of Education. The minimum education requirement for positions that allow for experience equivalency for an accredited degree is a high school diploma. Unless otherwise specified, an accredited degree must be obtained from a college or university listed with the U.S. Department of Education and recognized by the U.S. Secretary of Education. For positions with a salary grade of EX6 or higher that require an accredited degree, qualifying professional experience must be obtained AFTER the accredited degree is obtained. Successful completion of a pre-employment criminal history/background check is required for all positions. Some positions require a post offer drug screen and/or physical. If appointed, non-residents must obtain residency inside Kansas City, Missouri's city limits within nine months. The City of KCMO is an equal opportunity employer that values diversity and inclusion in the workplace. The City is committed to providing a workplace environment for its employees and citizens free from discrimination based on race, color, sex (including pregnancy), national origin, religion, age, disability, marital status, genetic information, sexual orientation, or gender identity. For more information, please see our EEO Policy The City of KCMO is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call 816-513-1908 or send an e-mail to accommodations@kcmo.org . If claiming military veterans' preference points, you must attach a copy of your DD-214 or a DD-256 (for reservists). To claim veterans' points you must have served 180 days of regular active duty service and be discharged or released under honorable conditions during peacetimes or 90 days of active duty service, one (1) day during "wartime" and a last discharge or release under honorable conditions. (DOD) 38 U.S. Code • 4211).
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
Posting expires: November 14, 2023 Salary range: $36,500 - $54,700 At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. General Description and Classification Standards Performs preventative maintenance and repairs on mechanical equipment in the maintenance of buildings, grounds and utility systems of plants. This is an experienced level position whose duties may include, but are not limited to: plumbing, welding and maintaining machinery and mechanical equipment such as engines, motors, pneumatic tools, chemical feeders, chlorinators, control units, pumps, water tanks and other production equipment using hand tools, power tools, and precision measuring and testing instruments in accordance with diagrams, sketches, operation manuals and manufacturer's specifications. Supervision Received Works under direct supervision and follows standardized procedures and written instructions to accomplish assigned tasks. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. May perform other duties as assigned. Maintains in accordance with diagrams, sketches, operation manuals and manufacturer's specifications, machinery and mechanical equipment such as engines, motors, pneumatic tools, chemical feeders, chlorinators, control units, pumps, water tanks, screens and other production equipment using hand tools, power tools, and precision measuring and testing instruments; adjusts functional parts of devices; identifies equipment maintenance needs; records mechanical equipment readings; lubricates and clean parts. Repairs and troubleshoots equipment; observes mechanical devices in operation to locate causes of trouble; dismantles devices to gain access to repair or replaces defective parts using hoists, cranes, hand tools and power tools; repairs electrical equipment; welds and uses cutting torches; Performs routine mechanical, electrical, welding, or machining maintenance activities on equipment including lubrication, inspection, and replacement parts; order and maintains stock levels of lubricants used in plant equipment. Conducts performance tests of plant equipment using tachometers, pressure gauges, flow meter, amp and volt meters. Diagnoses, troubleshoots, updates and repairs malfunctioning plant equipment; maintains, repairs and overhauls treatment plant equipment including aeration blowers, barminutors, pumps and motors, compressors, belt press, valves, drive units, hydraulic control units, chlorinators, chemical feeders, pneumatic equipment and hydraulic pressure systems. Participates in the installation of wastewater treatment plant equipment; participates in making modifications to equipment for maximum treatment process performance. Performs pipefitting; install and repair air, sewer and hydraulic piping systems. Maintains efficient records on operations and activities; maintains plant safety records; maintains and record shipping and receiving of parcels; prepare a variety of reports on data; maintains records of plant function readings and equipment history; maintains preventative maintenance records and schedules. Ensures and adheres to safe work practices and procedures including, but not limited to lockout/tag out and confined space rules and regulations. Interprets drawings, blueprints, schematics and diagrams for a variety of wastewater systems. Operates a variety of heavy equipment including loaders, backhoe, bull dozers, cranes, forklifts, and graders as necessary. Initiates purchase orders for parts and equipment. Decision Making Follows standardized procedures and written instructions to accomplish assigned tasks. Knowledge, Skills & Abilities This is a partial listing of necessary knowledge, skills, and abilities required to perform the job successfully. It is not an exhaustive list. Knowledge of: methods and techniques of maintaining and repairing wastewater plant equipment, machinery and related facilities; of lubricants used in plant equipment; of electrical codes; of the fundamentals of pipefitting and fabrication; of programmable logic controls, telemetry units and fiber optics; of operational characteristics of maintenance equipment and tools; of occupational hazards and standard safety practices. Skill in: the use of office equipment including computers and supporting software applications. Ability to: preventative maintenance tasks on plant equipment, machinery and related facilities; to operate a variety of maintenance equipment in a safe and effective manner; to read, interpret and understand technical manuals, blueprints, drawings, and diagrams; maintain detailed records and prepare clear and concise reports. Qualifications Minimum Qualifications - Education and Experience High school diploma or General Equivalency Diploma (GED) 1-3 years' of increasingly responsible experience in maintaining and repairing water/wastewater plant equipment. Senior Qualifications : 3+ years of experience. Preferred Education & Experience Completion of technical or vocational course of study in mechanics or a related field, or associates degree in the appropriate area 1 year of increasingly responsible experience in maintaining and repairing water/wastewater plant equipment. Licensure and Certifications Mech-Tech License preferred Water Distribution or Backflow License preferred. Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job.
May 11, 2024
Full Time
Posting expires: November 14, 2023 Salary range: $36,500 - $54,700 At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. General Description and Classification Standards Performs preventative maintenance and repairs on mechanical equipment in the maintenance of buildings, grounds and utility systems of plants. This is an experienced level position whose duties may include, but are not limited to: plumbing, welding and maintaining machinery and mechanical equipment such as engines, motors, pneumatic tools, chemical feeders, chlorinators, control units, pumps, water tanks and other production equipment using hand tools, power tools, and precision measuring and testing instruments in accordance with diagrams, sketches, operation manuals and manufacturer's specifications. Supervision Received Works under direct supervision and follows standardized procedures and written instructions to accomplish assigned tasks. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. May perform other duties as assigned. Maintains in accordance with diagrams, sketches, operation manuals and manufacturer's specifications, machinery and mechanical equipment such as engines, motors, pneumatic tools, chemical feeders, chlorinators, control units, pumps, water tanks, screens and other production equipment using hand tools, power tools, and precision measuring and testing instruments; adjusts functional parts of devices; identifies equipment maintenance needs; records mechanical equipment readings; lubricates and clean parts. Repairs and troubleshoots equipment; observes mechanical devices in operation to locate causes of trouble; dismantles devices to gain access to repair or replaces defective parts using hoists, cranes, hand tools and power tools; repairs electrical equipment; welds and uses cutting torches; Performs routine mechanical, electrical, welding, or machining maintenance activities on equipment including lubrication, inspection, and replacement parts; order and maintains stock levels of lubricants used in plant equipment. Conducts performance tests of plant equipment using tachometers, pressure gauges, flow meter, amp and volt meters. Diagnoses, troubleshoots, updates and repairs malfunctioning plant equipment; maintains, repairs and overhauls treatment plant equipment including aeration blowers, barminutors, pumps and motors, compressors, belt press, valves, drive units, hydraulic control units, chlorinators, chemical feeders, pneumatic equipment and hydraulic pressure systems. Participates in the installation of wastewater treatment plant equipment; participates in making modifications to equipment for maximum treatment process performance. Performs pipefitting; install and repair air, sewer and hydraulic piping systems. Maintains efficient records on operations and activities; maintains plant safety records; maintains and record shipping and receiving of parcels; prepare a variety of reports on data; maintains records of plant function readings and equipment history; maintains preventative maintenance records and schedules. Ensures and adheres to safe work practices and procedures including, but not limited to lockout/tag out and confined space rules and regulations. Interprets drawings, blueprints, schematics and diagrams for a variety of wastewater systems. Operates a variety of heavy equipment including loaders, backhoe, bull dozers, cranes, forklifts, and graders as necessary. Initiates purchase orders for parts and equipment. Decision Making Follows standardized procedures and written instructions to accomplish assigned tasks. Knowledge, Skills & Abilities This is a partial listing of necessary knowledge, skills, and abilities required to perform the job successfully. It is not an exhaustive list. Knowledge of: methods and techniques of maintaining and repairing wastewater plant equipment, machinery and related facilities; of lubricants used in plant equipment; of electrical codes; of the fundamentals of pipefitting and fabrication; of programmable logic controls, telemetry units and fiber optics; of operational characteristics of maintenance equipment and tools; of occupational hazards and standard safety practices. Skill in: the use of office equipment including computers and supporting software applications. Ability to: preventative maintenance tasks on plant equipment, machinery and related facilities; to operate a variety of maintenance equipment in a safe and effective manner; to read, interpret and understand technical manuals, blueprints, drawings, and diagrams; maintain detailed records and prepare clear and concise reports. Qualifications Minimum Qualifications - Education and Experience High school diploma or General Equivalency Diploma (GED) 1-3 years' of increasingly responsible experience in maintaining and repairing water/wastewater plant equipment. Senior Qualifications : 3+ years of experience. Preferred Education & Experience Completion of technical or vocational course of study in mechanics or a related field, or associates degree in the appropriate area 1 year of increasingly responsible experience in maintaining and repairing water/wastewater plant equipment. Licensure and Certifications Mech-Tech License preferred Water Distribution or Backflow License preferred. Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job.
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
Posting Open Until Filled Salary Range: $33,422 - $40,760 GENERAL DESCRIPTION AND CLASSIFICATION STANDARDS Under general supervision, performs a variety of routine semi-skilled maintenance for facilities; ensures that facilities are available for use and consistently maintained in a safe and clean condition. Areas of responsibility include, but are not limited to, carpentry, painting, plumbing, and electrical trades work. Operates a variety of maintenance and cleaning tools and equipment; and performs related work as required. SUPERVISION RECEIVED Works under the direction of the Facilities Maintenance Supervisor. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. ESSENTIAL DUTIES & RESPONSIBILITIES Performs general maintenance, repair, and installation tasks such as installing/repairing doors, changing light bulbs, locks, fences, basic plumbing duties, changing plumbing fixtures; repairing gutters/down spouts and roof leaks; assembling furniture or equipment; hanging pictures, blinds, event setups/breakdown, and moving furniture. Performs exterior facility grounds/landscaping tasks, exterior facility pressure washing. Provides assistance to other positions as needed. Communicates effectively with co-workers and other employees concerning work orders, problems, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Plans and organizes daily work orders; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments with the ability to prioritize accordingly. Plans and prepares for special projects on a monthly basis. Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. Performs other related duties as required. MINIMUM QUALIFICATIONS - Education and Experience High school diploma or GED required Three (3) years of building repairs and maintenance, carpentry, or t rade proficiency in basic plumbing, simple electrical, carpentry, drywall, tile, flooring, and painting. PREFERRED QUALIFICATIONs - Education and Experience Building Operators Certification (BOC) Building Owners and Managers Association (BOMA) Certification International Facility Management Association (IFMA) Certification HVAC Certification CERTIFICATIONS AND LICENSURE Valid Georgia Driver’s License. PHYSICAL REQUIREMENTS Frequent standing & walking; occasional sitting; Physical demands may vary depending on assigned work area and work tasks. Carrying of objects up to 50 lbs; The ability to lift 50 pounds and bending, k neeling, stooping, and twisting, is frequently required.
May 17, 2024
Full Time
Posting Open Until Filled Salary Range: $33,422 - $40,760 GENERAL DESCRIPTION AND CLASSIFICATION STANDARDS Under general supervision, performs a variety of routine semi-skilled maintenance for facilities; ensures that facilities are available for use and consistently maintained in a safe and clean condition. Areas of responsibility include, but are not limited to, carpentry, painting, plumbing, and electrical trades work. Operates a variety of maintenance and cleaning tools and equipment; and performs related work as required. SUPERVISION RECEIVED Works under the direction of the Facilities Maintenance Supervisor. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. ESSENTIAL DUTIES & RESPONSIBILITIES Performs general maintenance, repair, and installation tasks such as installing/repairing doors, changing light bulbs, locks, fences, basic plumbing duties, changing plumbing fixtures; repairing gutters/down spouts and roof leaks; assembling furniture or equipment; hanging pictures, blinds, event setups/breakdown, and moving furniture. Performs exterior facility grounds/landscaping tasks, exterior facility pressure washing. Provides assistance to other positions as needed. Communicates effectively with co-workers and other employees concerning work orders, problems, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Plans and organizes daily work orders; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments with the ability to prioritize accordingly. Plans and prepares for special projects on a monthly basis. Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. Performs other related duties as required. MINIMUM QUALIFICATIONS - Education and Experience High school diploma or GED required Three (3) years of building repairs and maintenance, carpentry, or t rade proficiency in basic plumbing, simple electrical, carpentry, drywall, tile, flooring, and painting. PREFERRED QUALIFICATIONs - Education and Experience Building Operators Certification (BOC) Building Owners and Managers Association (BOMA) Certification International Facility Management Association (IFMA) Certification HVAC Certification CERTIFICATIONS AND LICENSURE Valid Georgia Driver’s License. PHYSICAL REQUIREMENTS Frequent standing & walking; occasional sitting; Physical demands may vary depending on assigned work area and work tasks. Carrying of objects up to 50 lbs; The ability to lift 50 pounds and bending, k neeling, stooping, and twisting, is frequently required.
City of Kansas City, MO
Kansas City, Missouri, United States
Full-time position available with the General Services Department, Facilities Division located at 414 East 12th Street Salary Range: $22.61-$34.48/hour Normal Work Days/Hours: Monday-Friday, 8:00 a.m.-5:00 p.m. Application Deadline Date: Open Until Filled Responsibilities Inspects, repairs, and maintains boilers, hot water tanks, steam lines, air compressors, water feed lines, plumbing fixtures, motors, air conditioning units, and related equipment. Makes minor electrical repairs on freight elevators, wall switches, lamps, and fixtures; locates and drills floor outlets for telephone installations and electricity. Replaces piping, valves, and other worn or damaged parts on boilers Checks oil burners for proper pressure and adjustments; renews packing and bearings on sludge pumps. Maintains and repairs small combustion engines on equipment such as grass mowers, generators, jackhammers, and chain saws. Repairs and maintains machinery and equipment used in the operation of the municipal corrections facility such as laundry equipment and kitchen facilities. Performs full range of duties related to new construction, repairing, patching, replacing and/or painting concrete and asphalt surfaces including streets, sidewalks, parking lots, taxiways and runways; may perform duties related to construction or repair of stone, brick or block walls. Performs remodeling duties such as framing and installing drywall, installing electrical fixtures and wiring and installing plumbing fixtures and water lines. Operates snow removal equipment; performs minor equipment repairs, maintains proper fluids levels and replaces parts such as snow blades and brooms as needed. Executes fire alarm and sprinkler system repair and maintenance. Responds to alarm activation for system check. Performs welding repairs on buildings and equipment. Maintains work area in safe and organized manner. Performs full range of duties related to events and facility set-up including the movement and maintenance of movable walls, retractable risers, fencing, basketball courts, and lighting requests to include installation. Installs, repairs, and maintains machinery and equipment used in the operation of the convention facilities such as basketball floors, moveable walls, and utility carts as needed. Performs plumbing installation and repair in City facilities. Performs related duties as required. Must demonstrate knowledge of the methods, practices, tools, and materials in a variety of skilled crafts, including mechanical trades and work standards and practices in the various crafts and basic computer operation. Must demonstrate ability to work from blueprints and to prepare rough pencil sketches of equipment or fixtures to be constructed or repaired. Inspects a wide variety of electrical, mechanical, and other equipment and fixtures to determine defects and needed repairs. Leads a small group of skilled or unskilled workers when necessary. Maintains and makes minor repairs to shop equipment and tools. Operates and interprets complex diagnostic equipment and ability to determine the appropriate repair for equipment based on own knowledge and reference materials. Must be able to work independently. Must demonstrate ability to perform calculations using changes in units of measure and in the interpretation of complex gauges and scales. Differentiates between metric and standard units of measure. Performs calculations with liquid flows, pressures, and volumes. Qualifications REQUIRES high school graduation and 4 years of experience in a variety of mechanical crafts; OR an equivalent combination of qualifying education and experience. Must possess a valid state-issued driver's license in accordance with City of KCMO policies. May be required to obtain a valid MO Class A, B, or C CDL prior to the end of the probationary period as determined by the department. Must pass a pre-employment drug screen and post-offer physical examination as prescribed by the City. Other Information URGENT!!! CRITICAL RECRUITMENT INFORMATION Applications and/or resumes are evaluated on the information received by the application deadline. Please ensure that your application or resume clearly demonstrates how you meet the minimum qualifications for the position for which you are applying, this includes providing all relevant educational dates and a detailed description of relevant work experience, including months/years of employment. Applications and/or resumes may not be considered if information is incomplete. In order for a resume to be used in lieu of an application the resume must have been submitted online via the City's Applicant Tracking System. Positions requiring a high school diploma/GED certificate must be obtained from a school/program accredited by the Department of Education and recognized by the U.S. Secretary of Education. The minimum education requirement for positions that allow for experience equivalency for an accredited degree is a high school diploma. Unless otherwise specified, an accredited degree must be obtained from a college or university listed with the U.S. Department of Education and recognized by the U.S. Secretary of Education. For positions with a salary grade of EX6 or higher that require an accredited degree, qualifying professional experience must be obtained AFTER the accredited degree is obtained. Successful completion of a pre-employment criminal history/background check is required for all positions. Some positions require a post offer drug screen and/or physical. If appointed, non-residents must obtain residency inside Kansas City, Missouri's city limits within nine months. The City of KCMO is an equal opportunity employer that values diversity and inclusion in the workplace. The City is committed to providing a workplace environment for its employees and citizens free from discrimination based on race, color, sex (including pregnancy), national origin, religion, age, disability, marital status, genetic information, sexual orientation, or gender identity. For more information, please see our EEO Policy The City of KCMO is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call 816-513-1908 or send an e-mail to accommodations@kcmo.org . If claiming military veterans' preference points, you must attach a copy of your DD-214 or a DD-256 (for reservists). To claim veterans' points you must have served 180 days of regular active duty service and be discharged or released under honorable conditions during peacetimes or 90 days of active duty service, one (1) day during "wartime" and a last discharge or release under honorable conditions. (DOD) 38 U.S. Code • 4211).
Jun 18, 2024
Full Time
Full-time position available with the General Services Department, Facilities Division located at 414 East 12th Street Salary Range: $22.61-$34.48/hour Normal Work Days/Hours: Monday-Friday, 8:00 a.m.-5:00 p.m. Application Deadline Date: Open Until Filled Responsibilities Inspects, repairs, and maintains boilers, hot water tanks, steam lines, air compressors, water feed lines, plumbing fixtures, motors, air conditioning units, and related equipment. Makes minor electrical repairs on freight elevators, wall switches, lamps, and fixtures; locates and drills floor outlets for telephone installations and electricity. Replaces piping, valves, and other worn or damaged parts on boilers Checks oil burners for proper pressure and adjustments; renews packing and bearings on sludge pumps. Maintains and repairs small combustion engines on equipment such as grass mowers, generators, jackhammers, and chain saws. Repairs and maintains machinery and equipment used in the operation of the municipal corrections facility such as laundry equipment and kitchen facilities. Performs full range of duties related to new construction, repairing, patching, replacing and/or painting concrete and asphalt surfaces including streets, sidewalks, parking lots, taxiways and runways; may perform duties related to construction or repair of stone, brick or block walls. Performs remodeling duties such as framing and installing drywall, installing electrical fixtures and wiring and installing plumbing fixtures and water lines. Operates snow removal equipment; performs minor equipment repairs, maintains proper fluids levels and replaces parts such as snow blades and brooms as needed. Executes fire alarm and sprinkler system repair and maintenance. Responds to alarm activation for system check. Performs welding repairs on buildings and equipment. Maintains work area in safe and organized manner. Performs full range of duties related to events and facility set-up including the movement and maintenance of movable walls, retractable risers, fencing, basketball courts, and lighting requests to include installation. Installs, repairs, and maintains machinery and equipment used in the operation of the convention facilities such as basketball floors, moveable walls, and utility carts as needed. Performs plumbing installation and repair in City facilities. Performs related duties as required. Must demonstrate knowledge of the methods, practices, tools, and materials in a variety of skilled crafts, including mechanical trades and work standards and practices in the various crafts and basic computer operation. Must demonstrate ability to work from blueprints and to prepare rough pencil sketches of equipment or fixtures to be constructed or repaired. Inspects a wide variety of electrical, mechanical, and other equipment and fixtures to determine defects and needed repairs. Leads a small group of skilled or unskilled workers when necessary. Maintains and makes minor repairs to shop equipment and tools. Operates and interprets complex diagnostic equipment and ability to determine the appropriate repair for equipment based on own knowledge and reference materials. Must be able to work independently. Must demonstrate ability to perform calculations using changes in units of measure and in the interpretation of complex gauges and scales. Differentiates between metric and standard units of measure. Performs calculations with liquid flows, pressures, and volumes. Qualifications REQUIRES high school graduation and 4 years of experience in a variety of mechanical crafts; OR an equivalent combination of qualifying education and experience. Must possess a valid state-issued driver's license in accordance with City of KCMO policies. May be required to obtain a valid MO Class A, B, or C CDL prior to the end of the probationary period as determined by the department. Must pass a pre-employment drug screen and post-offer physical examination as prescribed by the City. Other Information URGENT!!! CRITICAL RECRUITMENT INFORMATION Applications and/or resumes are evaluated on the information received by the application deadline. Please ensure that your application or resume clearly demonstrates how you meet the minimum qualifications for the position for which you are applying, this includes providing all relevant educational dates and a detailed description of relevant work experience, including months/years of employment. Applications and/or resumes may not be considered if information is incomplete. In order for a resume to be used in lieu of an application the resume must have been submitted online via the City's Applicant Tracking System. Positions requiring a high school diploma/GED certificate must be obtained from a school/program accredited by the Department of Education and recognized by the U.S. Secretary of Education. The minimum education requirement for positions that allow for experience equivalency for an accredited degree is a high school diploma. Unless otherwise specified, an accredited degree must be obtained from a college or university listed with the U.S. Department of Education and recognized by the U.S. Secretary of Education. For positions with a salary grade of EX6 or higher that require an accredited degree, qualifying professional experience must be obtained AFTER the accredited degree is obtained. Successful completion of a pre-employment criminal history/background check is required for all positions. Some positions require a post offer drug screen and/or physical. If appointed, non-residents must obtain residency inside Kansas City, Missouri's city limits within nine months. The City of KCMO is an equal opportunity employer that values diversity and inclusion in the workplace. The City is committed to providing a workplace environment for its employees and citizens free from discrimination based on race, color, sex (including pregnancy), national origin, religion, age, disability, marital status, genetic information, sexual orientation, or gender identity. For more information, please see our EEO Policy The City of KCMO is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call 816-513-1908 or send an e-mail to accommodations@kcmo.org . If claiming military veterans' preference points, you must attach a copy of your DD-214 or a DD-256 (for reservists). To claim veterans' points you must have served 180 days of regular active duty service and be discharged or released under honorable conditions during peacetimes or 90 days of active duty service, one (1) day during "wartime" and a last discharge or release under honorable conditions. (DOD) 38 U.S. Code • 4211).
City of Kansas City, MO
Kansas City, Missouri, United States
Full-time position available with the Aviation Department, Central Utility Plant located at 1120 NW Prairie View Road Salary Range: $22.61-$34.48/hour Normal Work Days/Hours: Placed on schedule based on shift bid. Application Deadline Date: July 22, 2024 Responsibilities Operates and maintains stationary engines and mechanical equipment such as steam boilers, air compressors, chillers, electrical distribution gear to provide utilities such as light, heat, cooling, compressed air, or power for buildings and industrial processes. Reads meters and gauges or automatic recording devices at specified intervals to verify operating conditions. Records data such as temperature of equipment, hours of operation, fuel consumed, temperature or pressure, water levels, analysis of gases, voltage load, and fire system operation. Adjusts manual controls or overrides automatic controls to bring equipment into recommended or prescribed operating ranges, switch to backup equipment or systems, or to shut down equipment. Visually inspects equipment at periodic intervals to detect malfunctions or need for repair, adjustment or lubrication. Maintains equipment by tightening fittings, repacking bearings, replacing packing glands, gaskets, valves, recorders and gauges. Cleans and replaces burners or other components using hand and power tools. Oils and lubricates equipment. Performs water tests and pours chemical additives such as water softener, into treatment tank or lines to prevent scale buildup and to clean boilers and chillers. Records operation and maintenance actions taken during shift in operator's logbook. Qualifications REQUIRES high school graduation and 4 years of experience in a variety of mechanical crafts; OR an equivalent combination of qualifying education and experience. Must possess a valid state-issued driver's license in accordance with City of KCMO policies. May be required to obtain a valid MO Class A, B, or C CDL prior to the end of the probationary period as determined by the department. Must pass a pre-employment drug screen and post-offer physical examination as prescribed by the City. Other Information URGENT!!! CRITICAL RECRUITMENT INFORMATION Applications and/or resumes are evaluated on the information received by the application deadline. Please ensure that your application or resume clearly demonstrates how you meet the minimum qualifications for the position for which you are applying, this includes providing all relevant educational dates and a detailed description of relevant work experience, including months/years of employment. Applications and/or resumes may not be considered if information is incomplete. In order for a resume to be used in lieu of an application the resume must have been submitted online via the City's Applicant Tracking System. Positions requiring a high school diploma/GED certificate must be obtained from a school/program accredited by the Department of Education and recognized by the U.S. Secretary of Education. The minimum education requirement for positions that allow for experience equivalency for an accredited degree is a high school diploma. Unless otherwise specified, an accredited degree must be obtained from a college or university listed with the U.S. Department of Education and recognized by the U.S. Secretary of Education. For positions with a salary grade of EX6 or higher that require an accredited degree, qualifying professional experience must be obtained AFTER the accredited degree is obtained. Successful completion of a pre-employment criminal history/background check is required for all positions. Some positions require a post offer drug screen and/or physical. If appointed, non-residents must obtain residency inside Kansas City, Missouri's city limits within nine months. The City of KCMO is an equal opportunity employer that values diversity and inclusion in the workplace. The City is committed to providing a workplace environment for its employees and citizens free from discrimination based on race, color, sex (including pregnancy), national origin, religion, age, disability, marital status, genetic information, sexual orientation, or gender identity. For more information, please see our EEO Policy The City of KCMO is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call 816-513-1908 or send an e-mail to accommodations@kcmo.org . If claiming military veterans' preference points, you must attach a copy of your DD-214 or a DD-256 (for reservists). To claim veterans' points you must have served 180 days of regular active duty service and be discharged or released under honorable conditions during peacetimes or 90 days of active duty service, one (1) day during "wartime" and a last discharge or release under honorable conditions. (DOD) 38 U.S. Code • 4211).
Jun 22, 2024
Full Time
Full-time position available with the Aviation Department, Central Utility Plant located at 1120 NW Prairie View Road Salary Range: $22.61-$34.48/hour Normal Work Days/Hours: Placed on schedule based on shift bid. Application Deadline Date: July 22, 2024 Responsibilities Operates and maintains stationary engines and mechanical equipment such as steam boilers, air compressors, chillers, electrical distribution gear to provide utilities such as light, heat, cooling, compressed air, or power for buildings and industrial processes. Reads meters and gauges or automatic recording devices at specified intervals to verify operating conditions. Records data such as temperature of equipment, hours of operation, fuel consumed, temperature or pressure, water levels, analysis of gases, voltage load, and fire system operation. Adjusts manual controls or overrides automatic controls to bring equipment into recommended or prescribed operating ranges, switch to backup equipment or systems, or to shut down equipment. Visually inspects equipment at periodic intervals to detect malfunctions or need for repair, adjustment or lubrication. Maintains equipment by tightening fittings, repacking bearings, replacing packing glands, gaskets, valves, recorders and gauges. Cleans and replaces burners or other components using hand and power tools. Oils and lubricates equipment. Performs water tests and pours chemical additives such as water softener, into treatment tank or lines to prevent scale buildup and to clean boilers and chillers. Records operation and maintenance actions taken during shift in operator's logbook. Qualifications REQUIRES high school graduation and 4 years of experience in a variety of mechanical crafts; OR an equivalent combination of qualifying education and experience. Must possess a valid state-issued driver's license in accordance with City of KCMO policies. May be required to obtain a valid MO Class A, B, or C CDL prior to the end of the probationary period as determined by the department. Must pass a pre-employment drug screen and post-offer physical examination as prescribed by the City. Other Information URGENT!!! CRITICAL RECRUITMENT INFORMATION Applications and/or resumes are evaluated on the information received by the application deadline. Please ensure that your application or resume clearly demonstrates how you meet the minimum qualifications for the position for which you are applying, this includes providing all relevant educational dates and a detailed description of relevant work experience, including months/years of employment. Applications and/or resumes may not be considered if information is incomplete. In order for a resume to be used in lieu of an application the resume must have been submitted online via the City's Applicant Tracking System. Positions requiring a high school diploma/GED certificate must be obtained from a school/program accredited by the Department of Education and recognized by the U.S. Secretary of Education. The minimum education requirement for positions that allow for experience equivalency for an accredited degree is a high school diploma. Unless otherwise specified, an accredited degree must be obtained from a college or university listed with the U.S. Department of Education and recognized by the U.S. Secretary of Education. For positions with a salary grade of EX6 or higher that require an accredited degree, qualifying professional experience must be obtained AFTER the accredited degree is obtained. Successful completion of a pre-employment criminal history/background check is required for all positions. Some positions require a post offer drug screen and/or physical. If appointed, non-residents must obtain residency inside Kansas City, Missouri's city limits within nine months. The City of KCMO is an equal opportunity employer that values diversity and inclusion in the workplace. The City is committed to providing a workplace environment for its employees and citizens free from discrimination based on race, color, sex (including pregnancy), national origin, religion, age, disability, marital status, genetic information, sexual orientation, or gender identity. For more information, please see our EEO Policy The City of KCMO is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call 816-513-1908 or send an e-mail to accommodations@kcmo.org . If claiming military veterans' preference points, you must attach a copy of your DD-214 or a DD-256 (for reservists). To claim veterans' points you must have served 180 days of regular active duty service and be discharged or released under honorable conditions during peacetimes or 90 days of active duty service, one (1) day during "wartime" and a last discharge or release under honorable conditions. (DOD) 38 U.S. Code • 4211).
CITY OF ATLANTA, GA
College Park, Georgia, United States
General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Minimum Qualifications and Experience 5+ years landscaping Commercial grade equipment operator Heavy Equipment operator Must have computer skills and knowledge of software programs such as a CMMS, Microsoft Word, Outlook, Excel, etc. Preferred Qualifications and Experience 7+ years landscaping Education / Certifications High school diploma or General Equivalency Diploma (GED) Trade / Technical school or higher - Preferred Licensures CDL Class B Airfield Movement Area - AMA (Internal) CDL Class A preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job. Closing Date/Time: 2024-07-31
Jun 19, 2024
Full Time
General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Minimum Qualifications and Experience 5+ years landscaping Commercial grade equipment operator Heavy Equipment operator Must have computer skills and knowledge of software programs such as a CMMS, Microsoft Word, Outlook, Excel, etc. Preferred Qualifications and Experience 7+ years landscaping Education / Certifications High school diploma or General Equivalency Diploma (GED) Trade / Technical school or higher - Preferred Licensures CDL Class B Airfield Movement Area - AMA (Internal) CDL Class A preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job. Closing Date/Time: 2024-07-31
CITY OF ATLANTA, GA
College Park, Georgia, United States
Hourly pay range: $22.35-$26.83 General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Minimum Qualifications and Experience 3 - 7 years landscaping Commercial grade equipment operator Education / Certifications High school diploma or General Equivalency Diploma (GED). Trade or Technical school preferred Licensures CDL Class B preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job. Closing Date/Time: 2024-07-12
Jun 14, 2024
Full Time
Hourly pay range: $22.35-$26.83 General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Minimum Qualifications and Experience 3 - 7 years landscaping Commercial grade equipment operator Education / Certifications High school diploma or General Equivalency Diploma (GED). Trade or Technical school preferred Licensures CDL Class B preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job. Closing Date/Time: 2024-07-12
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $18.23/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications: High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred. A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
Mar 08, 2024
Full Time
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $18.23/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications: High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred. A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024