SAN ANTONIO WATER SYSTEM
San Antonio, Texas, United States
Grade 18 - Starting Hourly Rate: $28.00. Rate of pay depends on qualifications. Hiring/Retention Incentive External candidates who are hired by SAWS will receive a $1,000 Hiring Incentive . This incentive will be split into two payments of $500. The two payments will be made to the new hire on their second and fourth paycheck after they are hired. Upon successful completion of the new hire’s six-month introductory period, the new hire will also be eligible for an additional $1,000 Retention Incentive , which will be paid during their seventh month of employment with SAWS. Job Description J O B SUMMARY The Journey Level Electrician is responsible for diagnosing, installing, maintaining, and testing high and low voltage and any associated electrical equipment. This position is responsible for wiring power distribution systems or transmission wiring and equipment up to 13.4KV capacity. May install, test and program equipment associated with the Building Monitoring and Control System (BMCS). E SS E N T IA L FUNCTIONS Diagnoses, installs, tests, repairs and maintains electrical equipment associated with pumps, emergency power generators, high voltage switching, distribution equipment, air compressors, variable frequency drives, circuits, motors, fans, air conditioners, refrigerant systems, boilers and motor controls up to 4,160 volts and program programmable logic controllers. Repairs and adjusts equipment, machines and defective components, replacing worn parts such as gaskets and seals in watertight electrical equipment. Performs preventative maintenance and estimates electrical projects to include material and cost associated and recommends repair or replacement of equipment such as the removal and installation of light fixtures, transformers, relays, ballast and florescent fixtures. Applies principles and practices of National Electrical Code (NEC), National Fire Protection Association (NFPA), Occupational Safety & Health Administration (OSHA), National Leadership and Skills Conference (NLSC), electrical tables, electrical codes, work methods, tools, operation of high voltage and emergency equipment. Reads and interprets electrical, schematics diagrams and documents and modifies for the purpose of upgrading the performance of electrical equipment and facilities. Maintains inventory of necessary tools, equipment and spare parts. Reads and interprets blueprints, schematics, plans and manufacturers’ specifications. Operates man lifts, bucket trucks and associated electrical maintenance equipment. Establishes and maintains effective working relationships and public relations. Performs other duties as assigned. A DMINISTRATIVE SERVICES Installs and tests new installations associated with the Building Monitoring and Control System (BMCS) of any SAWS facility. Utilizes Building Management Systems (BMS), Metasys Building Management System (Dos Rios Lab), Micro main, word processing, spreadsheet and database software. Investigates problems with instruments and sensors including flow meters, variable speed drives, temperature sensors, pressure and level transmitters, air quality sensors, communication devices and interfaces associated with BMCS. Carries out programming and configuration changes in the development of alarm settings, sensor limits, time schedules, temperature set points and control strategies related to BMCS. D E C I SI O N MAKING This position receives general supervision. May be required to act as a Point of Contact (POC) for the electrical group you are assigned. M IN I MU M REQUIREMENTS High School Diploma or GED. Four years’ electrical experience. State of Texas Journeyman Electrician’s License. Valid Texas Class “C” Texas Driver’s License. Training on Confined Space, HAZMAT Awareness, Lock Out Tag Out, Supervising for Safety, Fit Testing, Electrical Safety and other certifications as required. Normal visual color discrimination. Perform position specific physical testing. Ability to report to work on time, maintain a good attendance record, and work all designated work schedules. P R E F E R R E D QUALIFICATIONS Five years’ commercial/industrial electrical experience Ability to operate Truck mounted 3-ton crane, forklift, scissor jack, trencher, bucket truck and mini backhoe. Completed certification or enrolled in a trade recognized electrical trades or electrical apprenticeship program (i.e.: St. Philips Electrical Trades, NJATC, IEC, etc.) JOB DIMENSIONS Ability to establish and maintain effective working relationships with internal and external customers, contractors and governmental agencies. Skill in utilizing a personal computer and associated software programs such as word processing, spreadsheets, and database software. Ability to communicate effectively, verbally and in writing. P H Y S IC A L DEMANDS AND WORKING CONDITIONS Physical requirements include lifting and dragging 50 pounds occasionally. Subject to standing, sitting, walking, climbing, bending, crawling, squatting, kneeling and working in cramped and strained positions for long periods of time to perform job scope. Also subject to climbing up to 200 feet in height. Requires visual acuity. Working conditions are primarily outside with frequent exposure to inclement weather; wastewater; mechanical, electrical, chemical and confined space hazards; offensive fumes; excessive noise; heavy traffic; deep excavations; and animals, snakes and poisonous insects. May be required to comply with requirements as specified in applicable regulations for personal protective equipment, including clearance for use of respiratory protection and other associated equipment. Also operates a company vehicle on a daily basis. Will be required to work hours other than regular shift such as short notice/unscheduled overtime, nights, weekends, holidays, on-call and rotating shifts. San Antonio Water System values the contributions of all its employees, providing them the best in compensation and benefits. The benefits package is designed to attract and retain a workforce of qualified employees who share a responsibility in providing quality water to 1 million consumers. From an affordable medical and dental plan to life-sustaining retirement and insurance plans, we offer benefits that reward employees for their commitment to a challenging career at SAWS. Employee benefits include the following: Competitive, market-based salaries Performance-based incentives Medical benefits Dental benefits Life insurance Prescription drug program Vision care plan Two retirement plans Deferred compensation plans (457 plan) Disability income Paid leave (vacation, sick, personal) Education assistance program Employee assistance program Flexible, tax-deferred health and dependent care spending accounts Wellness programs On-Site Fitness Facilities Community service opportunities Closing Date/Time: Continuous
Grade 18 - Starting Hourly Rate: $28.00. Rate of pay depends on qualifications. Hiring/Retention Incentive External candidates who are hired by SAWS will receive a $1,000 Hiring Incentive . This incentive will be split into two payments of $500. The two payments will be made to the new hire on their second and fourth paycheck after they are hired. Upon successful completion of the new hire’s six-month introductory period, the new hire will also be eligible for an additional $1,000 Retention Incentive , which will be paid during their seventh month of employment with SAWS. Job Description J O B SUMMARY The Journey Level Electrician is responsible for diagnosing, installing, maintaining, and testing high and low voltage and any associated electrical equipment. This position is responsible for wiring power distribution systems or transmission wiring and equipment up to 13.4KV capacity. May install, test and program equipment associated with the Building Monitoring and Control System (BMCS). E SS E N T IA L FUNCTIONS Diagnoses, installs, tests, repairs and maintains electrical equipment associated with pumps, emergency power generators, high voltage switching, distribution equipment, air compressors, variable frequency drives, circuits, motors, fans, air conditioners, refrigerant systems, boilers and motor controls up to 4,160 volts and program programmable logic controllers. Repairs and adjusts equipment, machines and defective components, replacing worn parts such as gaskets and seals in watertight electrical equipment. Performs preventative maintenance and estimates electrical projects to include material and cost associated and recommends repair or replacement of equipment such as the removal and installation of light fixtures, transformers, relays, ballast and florescent fixtures. Applies principles and practices of National Electrical Code (NEC), National Fire Protection Association (NFPA), Occupational Safety & Health Administration (OSHA), National Leadership and Skills Conference (NLSC), electrical tables, electrical codes, work methods, tools, operation of high voltage and emergency equipment. Reads and interprets electrical, schematics diagrams and documents and modifies for the purpose of upgrading the performance of electrical equipment and facilities. Maintains inventory of necessary tools, equipment and spare parts. Reads and interprets blueprints, schematics, plans and manufacturers’ specifications. Operates man lifts, bucket trucks and associated electrical maintenance equipment. Establishes and maintains effective working relationships and public relations. Performs other duties as assigned. A DMINISTRATIVE SERVICES Installs and tests new installations associated with the Building Monitoring and Control System (BMCS) of any SAWS facility. Utilizes Building Management Systems (BMS), Metasys Building Management System (Dos Rios Lab), Micro main, word processing, spreadsheet and database software. Investigates problems with instruments and sensors including flow meters, variable speed drives, temperature sensors, pressure and level transmitters, air quality sensors, communication devices and interfaces associated with BMCS. Carries out programming and configuration changes in the development of alarm settings, sensor limits, time schedules, temperature set points and control strategies related to BMCS. D E C I SI O N MAKING This position receives general supervision. May be required to act as a Point of Contact (POC) for the electrical group you are assigned. M IN I MU M REQUIREMENTS High School Diploma or GED. Four years’ electrical experience. State of Texas Journeyman Electrician’s License. Valid Texas Class “C” Texas Driver’s License. Training on Confined Space, HAZMAT Awareness, Lock Out Tag Out, Supervising for Safety, Fit Testing, Electrical Safety and other certifications as required. Normal visual color discrimination. Perform position specific physical testing. Ability to report to work on time, maintain a good attendance record, and work all designated work schedules. P R E F E R R E D QUALIFICATIONS Five years’ commercial/industrial electrical experience Ability to operate Truck mounted 3-ton crane, forklift, scissor jack, trencher, bucket truck and mini backhoe. Completed certification or enrolled in a trade recognized electrical trades or electrical apprenticeship program (i.e.: St. Philips Electrical Trades, NJATC, IEC, etc.) JOB DIMENSIONS Ability to establish and maintain effective working relationships with internal and external customers, contractors and governmental agencies. Skill in utilizing a personal computer and associated software programs such as word processing, spreadsheets, and database software. Ability to communicate effectively, verbally and in writing. P H Y S IC A L DEMANDS AND WORKING CONDITIONS Physical requirements include lifting and dragging 50 pounds occasionally. Subject to standing, sitting, walking, climbing, bending, crawling, squatting, kneeling and working in cramped and strained positions for long periods of time to perform job scope. Also subject to climbing up to 200 feet in height. Requires visual acuity. Working conditions are primarily outside with frequent exposure to inclement weather; wastewater; mechanical, electrical, chemical and confined space hazards; offensive fumes; excessive noise; heavy traffic; deep excavations; and animals, snakes and poisonous insects. May be required to comply with requirements as specified in applicable regulations for personal protective equipment, including clearance for use of respiratory protection and other associated equipment. Also operates a company vehicle on a daily basis. Will be required to work hours other than regular shift such as short notice/unscheduled overtime, nights, weekends, holidays, on-call and rotating shifts. San Antonio Water System values the contributions of all its employees, providing them the best in compensation and benefits. The benefits package is designed to attract and retain a workforce of qualified employees who share a responsibility in providing quality water to 1 million consumers. From an affordable medical and dental plan to life-sustaining retirement and insurance plans, we offer benefits that reward employees for their commitment to a challenging career at SAWS. Employee benefits include the following: Competitive, market-based salaries Performance-based incentives Medical benefits Dental benefits Life insurance Prescription drug program Vision care plan Two retirement plans Deferred compensation plans (457 plan) Disability income Paid leave (vacation, sick, personal) Education assistance program Employee assistance program Flexible, tax-deferred health and dependent care spending accounts Wellness programs On-Site Fitness Facilities Community service opportunities Closing Date/Time: Continuous
City of Austin, TX
Austin, TX, United States
Minimum Qualifications Austin Water Electrician I Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent plus four (4) years of experience in the electrical trade including electrician helper and licensed apprentice which must be in commercial/industrial installations. Experience may be acquired before and/or after licensing. Licenses and Certifications Required: Must possess a State of Texas Electrical Apprentice License. Valid Texas Class C Driver License. Austin Water Electrician II Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent, plus one year of experience in all phases of work as a journeyman-level electrician installing, diagnosing, troubleshooting, and repairing electrical systems such as medium voltage distribution equipment, motor controls, facility building equipment, and lighting systems at a water or wastewater treatment plant or industrial production plant. OR Graduation from an accredited high school or equivalent, plus two years of experience in all phases of work as a journeyman-level electrician, including directly related utility electrical experience performing installations and diagnostics experience working at voltages of 1000V-15kV installing, troubleshooting, and repairing a variety of electrical machinery and equipment in permanent building systems, power generation plants, water or wastewater treatment plants, or industrial plants. Experience must include commercial or industrial wiring, installing and repairing electrical conduit systems, and troubleshooting industrial motor control systems, mechanical motor starters, soft starters, and variable frequency drives. Licenses and Certifications Required: Must possess a valid State of Texas Electrical Journeyman License. A valid Texas Class C Driver License. Notes to Applicants This position will perform apprentice-level electrical diagnostics on motors and motor controls, substation switch-gear and electrical distribution systems, and lighting systems within Austin Water process facilities. Working with Austin Water provides a number of health and welfare benefits, such as medical, paid leave time, a great retirement plan, training opportunities and more - click HERE for more information. Additionally, this position offers a career progression plan, which provides a unique opportunity to promote without having to go through the competitive process. As employees go through on-the-job training to develop new skills and abilities and obtain the appropriate license, they are eligible to submit for Career Progression, which allows them to demonstrate knowledge and skills without having to interview for the promotion. Retention Incentive Bonus: This position may be eligible for an Incentive Bonus of up to $3,000! $500 after 90 days. $500 after 180 days. $1,000 after 1 year. $1,000 after 2 years. This position will be filled at one of the following levels: AWU Electrician I: Salary Range: $34.34 per hour AWU Electrician II: Salary Range: $34.34 - $42.14 per hour The incumbent in this position may be asked to report to one or more of the following locations: Lift Stations Various locations Hornsby Bend Biosolids Plant 2210 S. FM 973, Austin, TX 78725 South Austin Regional Wastewater Treatment Plant 1017 Fallwell Lane, Austin TX, 78717 Walnut Creek Wastewater Treatment Plant 7113 FM 969, Austin, TX 78724 Davis Water Treatment Plant 3500 W. 35th Street, Austin, Texas 78703 Water Treatment Plant 4 6800 North F. M. 620, Austin, Texas 78732 Ullrich Water Treatment Plant 1000 Forest View Dr., Austin, Texas 78746 Pump Stations & Reservoirs - South Service Support Center 3616 S. First St., Austin, Texas 78704 Work location and shift assignment for candidates selected will be determined based on business need and is subject to change at management’s discretion. This position is considered essential and as such we are response ready 24/7. During bad weather events we may be called in to respond and work 12-hour mandatory shifts to provide uninterrupted service to our customers. This position will require you to work scheduled and unscheduled overtime, outside of normal operating hours. It will also require you to participate in an on-call shift rotation program and respond to after-hours emergencies. Both the overtime and on-call shifts may require you to work nights, weekends, and holidays. When completing the City of Austin employment application: This position requires experience in commercial/industrial electrical installations, not residential. Please include all of your relevant work experience that meets this requirement and indicate for each job whether the work you performed was industrial, commercial, or residential. Please be sure to detail on the application all previous employment that you wish to be considered as part of your qualifications. A detailed, complete employment application is required. It helps us to better evaluate your qualifications and will be used to determine salary if you are selected for this position. Be sure to provide job titles and employment dates for all jobs you wish to be considered. Your work history should include the duties you performed, the environment you worked in (industrial/commercial/residential), the voltage that you worked with, and any related equipment and computer software used for each employer listed on your application. If you are selected to interview: Your skill level in some of the competency areas of this job will be assessed through a skills testing appointment. Appointments are offered virtually using Microsoft Teams or in person at an Austin Water facility. If you are selected as a top candidate: Verification of your education (which may include high school graduation or GED , undergraduate and/or graduate degrees) will be required. You must provide proof of education from an accredited organization/institution. And are in the military or a veteran, you will need to provide a copy of your DD-214 prior to confirming a start date. Technical Licensure: This position requires the employee to hold a valid State of Texas Electrical Journeyman or Apprentice License. To determine your eligibility, please review the Texas Department of Licensing and Regulation Guidelines Driving Requirement: This position requires a Valid Texas Class “C” Driver License or the ability to acquire one by your hire date. External New Hires must meet the City of Austin’s Driver Record Evaluation ( DRE ) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. Physical Requirements: This position will require that you be able to perform the following essential job functions with confidence and with or without reasonable accommodations: carrying or lifting up to 50 lbs., pushing or pulling up to 50 lbs., sitting, standing, walking, lying, climbing stairs and ladders, reaching overhead, kneeling, crawling, stooping/bending, twisting, repetitive foot and hand movement, driving, grasping and squeezing, exposure to extreme weather conditions, atmospheric conditions, hazardous conditions, and very loud noise. Candidates must be able to work in environments which may have hazardous atmospheres or in confined spaces where there is limited or restricted means for entry and exit, or where the activities of an employee are hindered. Candidates must be able to perform duties with confidence at sites where climbing heights of up to 200 feet is required on ladders that support up to 400 lbs. Selected candidate will be required to complete and pass a pre-employment physical exam to be considered for this position, which includes a Functional (FC) strength/agility test. Secondary Employment: All Austin Water employees are prohibited from accepting or engaging in any secondary employment that might conflict or interfere with an employee’s duty and responsibility to the Department. AW must review all secondary employment. Employees are required to submit a Secondary Employment Application for review and approval upon being hired with Austin Water, as well as current Austin Water employees considering Secondary Employment. All Austin Water worksite locations are tobacco-free. Use of tobacco products and/or e-cigarettes is not permitted on any AW worksite - including construction sites, parking lots, garages or in any personal vehicle located on the premises. Pay Range See Notes to Applicants Hours Monday through Friday, 6:30 a.m. to 3:00 p.m. Job Close Date 05/16/2024 Type of Posting External Department Austin Water Utility Regular/Temporary Regular Grant Funded or Pooled Position Not Applicable Category Technical Location 3616 South First Street, Austin, TX 78704 Preferred Qualifications Preferred Experience: Knowledge, training, and experience performing installations, maintenance, and diagnostics on 600v-5kv class motors and motor controls, switchgear and 15kv class electrical distribution systems. Experience working with solid state devices used in the operations of substation distribution equipment and process/motor control systems. Experience working in a water utility or similar industrial environment. Experience working on energized electrical power systems. Basic computer skills. Duties, Functions and Responsibilities This position is posted at multiple levels. For Duties, Functions and Responsibilities, please select the appropriate job description below. Essential duties and functions, pursuant to the Americans with Disabilities Act, may include the following. Other related duties may be assigned. Austin Water Electrician I Austin Water Electrician II Knowledge, Skills and Abilities This position is posted at multiple levels. For Knowledge, Skills and Abilities, please select the appropriate job description below. Must possess required knowledge, skills, abilities, and experience and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed. Austin Water Electrician I Austin Water Electrician II Criminal Background Investigation This position does not require a Criminal Background Investigation EEO/ADA The City of Austin is committed to compliance with the Americans with Disabilities Act. If you require reasonable accommodation during the application process or have a question regarding an essential job function, please call (512) 974-3210 or Texas Relay by dialing 7-1-1. The City of Austin will not discriminate against any applicant or employee based on race, creed, color, national origin, sex, gender identity, age, religion, veteran status, disability, or sexual orientation. In addition, the City will not discriminate in employment decisions on the basis of an individual’s AIDS , AIDS Related Complex, or HIV status; nor will the City discriminate against individuals who are perceived to be at risk of HIV infection, or who associate with individuals who are believed to be at risk. Information For City Employees: If you are an employee within the department, are in good standing and meet both the minimum and preferred qualifications, then you will receive an initial interview. Supplemental Questions Required fields are indicated with an asterisk (*). * The minimum qualifications for the Austin Water Electrician I are: Graduation from an accredited high school or equivalent plus four (4) years of experience in the electrical trade, including electrician helper and licensed apprentice, which must be in commercial/industrial installations. Experience may be acquired before and/or after licensing. Do you meet these minimum qualifications? Yes No * This position requires a valid Texas Class C Driver License. Do you have a valid Texas Class C Driver license or, if selected for this position, do you the ability to acquire a valid Texas Class C Driver license by your hire date? Yes No * The City of Austin Driver Eligibility Standards require that External New Hires meet the City’s Driver Record Evaluation (DRE) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. Do you meet this requirement? Yes No * Which of the following best describes your current electrical licensure status? I have a current State of Texas Electrical Master License I have a current State of Texas Electrical Journeyman I have a current State of Texas Electrical Apprentice License I have a license from another state that is eligible for reciprocity for a Texas Electrical Journeyman or Master License I have a license from another state that is eligible for reciprocity for a Texas Electrical Apprentice License I do not have an electrical license * Select the items that describe your experience related to the installation, maintenance and diagnostics of electrical distribution and process/motor control systems on equipment rated greater than 600 volts and 15kv electrical substation distribution equipment and process/motor control systems. (Select all that apply) I have experience with 15kv class electrical substation distribution equipment I have experience with 15kv class process/motor control systems I have experience with 600v - 5kv class process/motor control systems I have experience with equipment rated greater than 600 volts I have experience with equipment rated less than 600 volts in a commercial setting I have experience with 120/240 volt systems I do not have any of the above experience * Select which types of electrical test equipment you have experience working with. (Select all that apply) Low voltage multimeters Medium voltage meters Ammeters 5kv megohmmeter 15kv megohmmeter Transformer turns ratio meter Smart relay test set Phasing sticks None of the above * Select the electrical environment(s) you have experience working in. (Select all that apply) Residential Commercial Light Industrial Heavy Industrial Private/Public Utility Energized Electrical Systems I do not have any of the above experience * Please select the safety and personal protective equipment you have experience using. (Select all that apply) Low voltage rated electric gloves Medium voltage rated electric gloves Hazardous air monitor Confined space entry equipment Fall protection harnesses Arc Rated flash suits Hard hat Safety glasses Leather gloves FR uniforms Safety toed boots None of the above * This position will require you to be able to occasionally carry, lift, push, or pull up to 50 lbs. unassisted, wear personal protective equipment, be exposed to extreme weather conditions, atmospheric and hazardous conditions and very loud noise. In addition, you will be required to be able to perform duties with confidence descending into confined spaces and climbing heights of up to 200 feet on ladders that support up to 400 lbs. Are you able to perform these duties with or without reasonable accommodations? Yes No * Were you referred to this opportunity by an Austin Water employee? If yes, please provide the employee’s full name. (Open Ended Question) Optional & Required Documents Required Documents Optional Documents
Minimum Qualifications Austin Water Electrician I Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent plus four (4) years of experience in the electrical trade including electrician helper and licensed apprentice which must be in commercial/industrial installations. Experience may be acquired before and/or after licensing. Licenses and Certifications Required: Must possess a State of Texas Electrical Apprentice License. Valid Texas Class C Driver License. Austin Water Electrician II Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent, plus one year of experience in all phases of work as a journeyman-level electrician installing, diagnosing, troubleshooting, and repairing electrical systems such as medium voltage distribution equipment, motor controls, facility building equipment, and lighting systems at a water or wastewater treatment plant or industrial production plant. OR Graduation from an accredited high school or equivalent, plus two years of experience in all phases of work as a journeyman-level electrician, including directly related utility electrical experience performing installations and diagnostics experience working at voltages of 1000V-15kV installing, troubleshooting, and repairing a variety of electrical machinery and equipment in permanent building systems, power generation plants, water or wastewater treatment plants, or industrial plants. Experience must include commercial or industrial wiring, installing and repairing electrical conduit systems, and troubleshooting industrial motor control systems, mechanical motor starters, soft starters, and variable frequency drives. Licenses and Certifications Required: Must possess a valid State of Texas Electrical Journeyman License. A valid Texas Class C Driver License. Notes to Applicants This position will perform apprentice-level electrical diagnostics on motors and motor controls, substation switch-gear and electrical distribution systems, and lighting systems within Austin Water process facilities. Working with Austin Water provides a number of health and welfare benefits, such as medical, paid leave time, a great retirement plan, training opportunities and more - click HERE for more information. Additionally, this position offers a career progression plan, which provides a unique opportunity to promote without having to go through the competitive process. As employees go through on-the-job training to develop new skills and abilities and obtain the appropriate license, they are eligible to submit for Career Progression, which allows them to demonstrate knowledge and skills without having to interview for the promotion. Retention Incentive Bonus: This position may be eligible for an Incentive Bonus of up to $3,000! $500 after 90 days. $500 after 180 days. $1,000 after 1 year. $1,000 after 2 years. This position will be filled at one of the following levels: AWU Electrician I: Salary Range: $34.34 per hour AWU Electrician II: Salary Range: $34.34 - $42.14 per hour The incumbent in this position may be asked to report to one or more of the following locations: Lift Stations Various locations Hornsby Bend Biosolids Plant 2210 S. FM 973, Austin, TX 78725 South Austin Regional Wastewater Treatment Plant 1017 Fallwell Lane, Austin TX, 78717 Walnut Creek Wastewater Treatment Plant 7113 FM 969, Austin, TX 78724 Davis Water Treatment Plant 3500 W. 35th Street, Austin, Texas 78703 Water Treatment Plant 4 6800 North F. M. 620, Austin, Texas 78732 Ullrich Water Treatment Plant 1000 Forest View Dr., Austin, Texas 78746 Pump Stations & Reservoirs - South Service Support Center 3616 S. First St., Austin, Texas 78704 Work location and shift assignment for candidates selected will be determined based on business need and is subject to change at management’s discretion. This position is considered essential and as such we are response ready 24/7. During bad weather events we may be called in to respond and work 12-hour mandatory shifts to provide uninterrupted service to our customers. This position will require you to work scheduled and unscheduled overtime, outside of normal operating hours. It will also require you to participate in an on-call shift rotation program and respond to after-hours emergencies. Both the overtime and on-call shifts may require you to work nights, weekends, and holidays. When completing the City of Austin employment application: This position requires experience in commercial/industrial electrical installations, not residential. Please include all of your relevant work experience that meets this requirement and indicate for each job whether the work you performed was industrial, commercial, or residential. Please be sure to detail on the application all previous employment that you wish to be considered as part of your qualifications. A detailed, complete employment application is required. It helps us to better evaluate your qualifications and will be used to determine salary if you are selected for this position. Be sure to provide job titles and employment dates for all jobs you wish to be considered. Your work history should include the duties you performed, the environment you worked in (industrial/commercial/residential), the voltage that you worked with, and any related equipment and computer software used for each employer listed on your application. If you are selected to interview: Your skill level in some of the competency areas of this job will be assessed through a skills testing appointment. Appointments are offered virtually using Microsoft Teams or in person at an Austin Water facility. If you are selected as a top candidate: Verification of your education (which may include high school graduation or GED , undergraduate and/or graduate degrees) will be required. You must provide proof of education from an accredited organization/institution. And are in the military or a veteran, you will need to provide a copy of your DD-214 prior to confirming a start date. Technical Licensure: This position requires the employee to hold a valid State of Texas Electrical Journeyman or Apprentice License. To determine your eligibility, please review the Texas Department of Licensing and Regulation Guidelines Driving Requirement: This position requires a Valid Texas Class “C” Driver License or the ability to acquire one by your hire date. External New Hires must meet the City of Austin’s Driver Record Evaluation ( DRE ) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. Physical Requirements: This position will require that you be able to perform the following essential job functions with confidence and with or without reasonable accommodations: carrying or lifting up to 50 lbs., pushing or pulling up to 50 lbs., sitting, standing, walking, lying, climbing stairs and ladders, reaching overhead, kneeling, crawling, stooping/bending, twisting, repetitive foot and hand movement, driving, grasping and squeezing, exposure to extreme weather conditions, atmospheric conditions, hazardous conditions, and very loud noise. Candidates must be able to work in environments which may have hazardous atmospheres or in confined spaces where there is limited or restricted means for entry and exit, or where the activities of an employee are hindered. Candidates must be able to perform duties with confidence at sites where climbing heights of up to 200 feet is required on ladders that support up to 400 lbs. Selected candidate will be required to complete and pass a pre-employment physical exam to be considered for this position, which includes a Functional (FC) strength/agility test. Secondary Employment: All Austin Water employees are prohibited from accepting or engaging in any secondary employment that might conflict or interfere with an employee’s duty and responsibility to the Department. AW must review all secondary employment. Employees are required to submit a Secondary Employment Application for review and approval upon being hired with Austin Water, as well as current Austin Water employees considering Secondary Employment. All Austin Water worksite locations are tobacco-free. Use of tobacco products and/or e-cigarettes is not permitted on any AW worksite - including construction sites, parking lots, garages or in any personal vehicle located on the premises. Pay Range See Notes to Applicants Hours Monday through Friday, 6:30 a.m. to 3:00 p.m. Job Close Date 05/16/2024 Type of Posting External Department Austin Water Utility Regular/Temporary Regular Grant Funded or Pooled Position Not Applicable Category Technical Location 3616 South First Street, Austin, TX 78704 Preferred Qualifications Preferred Experience: Knowledge, training, and experience performing installations, maintenance, and diagnostics on 600v-5kv class motors and motor controls, switchgear and 15kv class electrical distribution systems. Experience working with solid state devices used in the operations of substation distribution equipment and process/motor control systems. Experience working in a water utility or similar industrial environment. Experience working on energized electrical power systems. Basic computer skills. Duties, Functions and Responsibilities This position is posted at multiple levels. For Duties, Functions and Responsibilities, please select the appropriate job description below. Essential duties and functions, pursuant to the Americans with Disabilities Act, may include the following. Other related duties may be assigned. Austin Water Electrician I Austin Water Electrician II Knowledge, Skills and Abilities This position is posted at multiple levels. For Knowledge, Skills and Abilities, please select the appropriate job description below. Must possess required knowledge, skills, abilities, and experience and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed. Austin Water Electrician I Austin Water Electrician II Criminal Background Investigation This position does not require a Criminal Background Investigation EEO/ADA The City of Austin is committed to compliance with the Americans with Disabilities Act. If you require reasonable accommodation during the application process or have a question regarding an essential job function, please call (512) 974-3210 or Texas Relay by dialing 7-1-1. The City of Austin will not discriminate against any applicant or employee based on race, creed, color, national origin, sex, gender identity, age, religion, veteran status, disability, or sexual orientation. In addition, the City will not discriminate in employment decisions on the basis of an individual’s AIDS , AIDS Related Complex, or HIV status; nor will the City discriminate against individuals who are perceived to be at risk of HIV infection, or who associate with individuals who are believed to be at risk. Information For City Employees: If you are an employee within the department, are in good standing and meet both the minimum and preferred qualifications, then you will receive an initial interview. Supplemental Questions Required fields are indicated with an asterisk (*). * The minimum qualifications for the Austin Water Electrician I are: Graduation from an accredited high school or equivalent plus four (4) years of experience in the electrical trade, including electrician helper and licensed apprentice, which must be in commercial/industrial installations. Experience may be acquired before and/or after licensing. Do you meet these minimum qualifications? Yes No * This position requires a valid Texas Class C Driver License. Do you have a valid Texas Class C Driver license or, if selected for this position, do you the ability to acquire a valid Texas Class C Driver license by your hire date? Yes No * The City of Austin Driver Eligibility Standards require that External New Hires meet the City’s Driver Record Evaluation (DRE) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. Do you meet this requirement? Yes No * Which of the following best describes your current electrical licensure status? I have a current State of Texas Electrical Master License I have a current State of Texas Electrical Journeyman I have a current State of Texas Electrical Apprentice License I have a license from another state that is eligible for reciprocity for a Texas Electrical Journeyman or Master License I have a license from another state that is eligible for reciprocity for a Texas Electrical Apprentice License I do not have an electrical license * Select the items that describe your experience related to the installation, maintenance and diagnostics of electrical distribution and process/motor control systems on equipment rated greater than 600 volts and 15kv electrical substation distribution equipment and process/motor control systems. (Select all that apply) I have experience with 15kv class electrical substation distribution equipment I have experience with 15kv class process/motor control systems I have experience with 600v - 5kv class process/motor control systems I have experience with equipment rated greater than 600 volts I have experience with equipment rated less than 600 volts in a commercial setting I have experience with 120/240 volt systems I do not have any of the above experience * Select which types of electrical test equipment you have experience working with. (Select all that apply) Low voltage multimeters Medium voltage meters Ammeters 5kv megohmmeter 15kv megohmmeter Transformer turns ratio meter Smart relay test set Phasing sticks None of the above * Select the electrical environment(s) you have experience working in. (Select all that apply) Residential Commercial Light Industrial Heavy Industrial Private/Public Utility Energized Electrical Systems I do not have any of the above experience * Please select the safety and personal protective equipment you have experience using. (Select all that apply) Low voltage rated electric gloves Medium voltage rated electric gloves Hazardous air monitor Confined space entry equipment Fall protection harnesses Arc Rated flash suits Hard hat Safety glasses Leather gloves FR uniforms Safety toed boots None of the above * This position will require you to be able to occasionally carry, lift, push, or pull up to 50 lbs. unassisted, wear personal protective equipment, be exposed to extreme weather conditions, atmospheric and hazardous conditions and very loud noise. In addition, you will be required to be able to perform duties with confidence descending into confined spaces and climbing heights of up to 200 feet on ladders that support up to 400 lbs. Are you able to perform these duties with or without reasonable accommodations? Yes No * Were you referred to this opportunity by an Austin Water employee? If yes, please provide the employee’s full name. (Open Ended Question) Optional & Required Documents Required Documents Optional Documents
MASSACHUSETTS TRIAL COURT
Salem, Massachusetts, United States
Title: Senior Maintenance Technician- Salem Pay Grade: Grade 13 Starting Pay: $54,593.18/Yr. Departmental Mission Statement: The Facilities Management Department of Trial Court provides for the management and maintenance of 63 state-owned courthouses located in ten counties of the Commonwealth. The Department is committed to administering effective property management, and for ensuring the delivery of quality services necessary for the efficient and reliable operation of all of the facilities which it maintains. FACILITES MANAGEMENT & CAPITAL PLANNING ORGANIZATIONAL PROFILE: Notes: Candidate must be licensed as an Electrician, HVAC or a Plumber. The hours for this position is 6am-2pm. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. This position may have occasional travel. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. Position Summary: This series is responsible for performing the full range of skilled trade position duties for both licensed and unlicensed trades. Typical duties include repairing, installing and testing various types of systems and equipment. These positions may also frequently include the application of complex materials and compounds consistent with general contracting work. The title above the entry level requires the performance of increasingly more responsible and varied work which requires advanced skill and experience with regard to the various licensed and unlicensed trades. Employees are appointed at the entry level position title and are eligible for reclassification to a higher level position within this series consistent with the specifications for the higher level position title. The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Reports to a Facilities Supervisor performing structured but not always routine work; Moderate judgment is required. Senior Maintenance Tech I (13) - This is the entry level position within this series. Employees at this level are expected to perform plumbing, electrical, carpentry, HVAC, painting, and other trades and technical work in their area of expertise. Employees are expected to have an established area specialization developed through training and experience and can work independently. Senior Maintenance Tech II (14) - This is the second level within the series. These employees are generally involved in projects of a larger scope and complexity consistent with experience and training. The Senior Maintenance Tech II engages in more complex project assignments and has a higher degree of contact with court officials. Senior Maintenance Tech IIs take lead roles in the completion of projects. Employees are required to work a minimum of three years as a Senior Maintenance Tech I before being eligible to reclassify to the higher level. Senior Maintenance Tech II positions also require the employee to hold a trade or technical license if applicable in their area of specialization prior to applying for reclassification. Senior Maintenance Technician Duties: The following list of major duties represents a composite list of typical duties performed by individuals in various areas of specialization. Specific duties performed by an incumbent will vary depending upon the Division, designated assignment, and level of the employee. All positions may perform related duties as required. Carpenter Maintains buildings and related structures applying carpentry techniques and using carpentry tools to construct, alter, repair and/or install walls, stairs, floors, ceilings, windows, doors, roofs, gutters, locks, air-conditioners, handicapped chair rails and ramps, shelving, etc. Inspect buildings needing carpentry repair or alterations, estimates job duration and the cost and/or quantities of labor and materials needed to complete the job. Interprets and/or draws up sketches, patterns, blueprints, instructions and/or layouts of work to be done. Perform structural repair, alteration or improvement work such as lowering ceilings and paneling rooms; preparing surfaces for plaster or cement work; studding, wiring and plastering walls and cracks in floors or around windows; taping joints on sheetrock; and pre-cementing and/or replacing formica tops. Confers with various department heads or managers regarding handling of emergencies, the feasibility of performing repair or alterations and the scheduling of work. Performs related work such as framing pictures; making window and door screens; drilling holes in signs; ordering materials and supplies and cleaning; and sharpening and tempering various tools and equipment. Electrician Tests, repairs, installs and /or maintains various types of electrical systems and equipment by operating the appropriate equipment and tools to ensure proper maintenance and functioning of necessary equipment. Troubleshoots electrical and related equipment using necessary electrical equipment and by reading schematics, diagrams and outlines to identify and correct operational problems. Maintain an adequate inventory of equipment and materials. Elevator Repairperson The following list of major duties represents a composite list of typical duties performed by individuals in this position. Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division. Inspects and tests elevators and related machinery to ensure that they meet legal operating requirements. Review plans and specifications for proposed installations or alterations of elevators and related machinery. Test elevators to ensure the receipt of certificates of inspections. Provide technical assistance by responding orally or in writing to inquiries. Perform periodic inspections in compliance with public safety requirements. Coordinates and schedules inspections with other agencies and contractors maintaining personal logs, compiles statistical data and represents the agency at hearing or meetings. HVAC Technician Installs, repairs, alters and maintains existing heating, venting and air conditioning (HVAC) equipment and systems. Troubleshoots HVAC equipment and systems. Run standard tests to determine whether finished work meets specifications. Inspect facility to determine the need for maintenance and repair to HVAC equipment. Establish priorities and make recommendations concerning work activities. Locksmith Install lock devices in doors, desks, office equipment and other units. Repairs and/or overhauls locking devices such as mortise, rim, key-in-the knob locks, dead bolt, office equipment, padlocks and emergency exit locks by repairing for replacing worn tumblers, springs or other parts of locking devices; by making alterations to locking mechanisms and units; and/or by replacing escutcheons and face plates on doors to change the size of existing holes to assure correct Fitchburg District Court. Repairs and/or installs locks containing dual locking capabilities by reworking locking devices designed to work in conjunction with other components and equipment to form a complete security or surveillance system. Changes lock combinations by inserting new or repaired tumblers into locks in order to increase security. Mason/Plasterer Lays brick, stone and cement blocks using a variety of hand and power tools such as brick or napping hammer, brick or shill saw, pick, chisel and hammer to build, alter, repair and /or maintain brick and/or concrete surfaces and structures such as sidewalks, partitions, floors, chimneys, etc. Plasters walls and ceilings. Prepare surfaces for plastering or cement work. Pours concrete in molds or forms to make slabs or blocks .Erects and dismantles scaffolding, riggings, and/or ladders. Reads instructions and interprets blueprints and sketches to determine work to be done. Repairs masonry and walls by patching with cement or plaster. Tape joints on sheetrock Perform related duties such as caulking and waterproofing cracks in walls and floors; coring holes through cement or marble floors; cleaning tools and equipment; laying-out cement or marble floors; cleaning tools and equipment; laying-out drop cloths; studding, wiring, and plastering door and window openings, etc. Order materials and supplies. Repair and maintain power tools to ensure proper operation. Painter Applies paints, varnish, and/or stains to all types of surfaces(e.g. wood, metal, plaster, etc.) In order to protect and beautify such surfaces using appropriate utensils and equipment such as paint spraying machines. Prepares surfaces for painting using appropriate tools, equipment and techniques. Selects the types and color of paints, varnish or stain and mixes, blends and prepares the same for proper color match. Erects, repairs, maintains and operates staging, and scaffolding following accepted safety practices in order to gain access to areas needing painting. Estimates length of time, cost and quantities of materials and manpower needed to complete a job. Operates, cleans and maintains hand and power tools, air compressors and painting equipment. Confers with supervisors and department heads regarding the scheduling of work, the handling of emergencies and the feasibility of installing painting equipment and materials in the area in order to ensure that needs of the agency are met expeditiously and at a convenient time. Prepares surfaces for plaster or cement work by taping joints on sheetrock, caulking and waterproofing walls and cracks in floors, etc. by using appropriate tools and equipment. Performs related duties such as preparing various reports; maintaining records and files; setting up signs and barricades; reading instructions on lay-outs; removing and replacing glass; drilling holes in signs; printing letters and signs; laying out drop cloths; and moving office furniture. Based on assignment, may operate road-line painting machines and sand blasting equipment. Read and/or interpret blueprints, sketches, instructions or layouts to understand work to be done. Plumber Install, repairs, and alters steam plumbing systems. Reads and interprets blueprints, sketches, instructions or layouts to understand construction work to be done. Schedules installation, maintenance, and/or repair work by conferring with supervisors and other department personnel to determine location of equipment and appropriate time to complete the project. Estimates length of time, cost of materials and manpower needed to develop a project budget. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas: Ethics and Values Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. Mission Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. Problem Solving Accurately assesses maintenance problems of a routine nature and initiates corrective action. Continuous Learning Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. Commitment to Diversity Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. Customer Service Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. Collaboration Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Senior Maintenance Technician: A high school diploma or equivalent; and, the following required experience and abilities in one or more of the following skilled trades or areas of specialization: Carpenter: Must have at least four years of full-time experience in carpentry, woodworking or cabinet-making work or a combination of two years' experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the principles and techniques of carpentry. Knowledge of the types of building structures. Knowledge of the types of material used in carpentry. Knowledge of the types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging, etc. Knowledge and skill in the types and uses of small hand held tools such as hammers, saws, screwdrivers, chisels, drills, etc. Knowledge and skill in the types and uses of tools used in carpentry bench work. Knowledge and skill in the types and uses of small measurement devices such as power saws, power drills, power hammers, etc. Electrician: Possession of a current and valid Massachusetts journeyman electrician's license issued by the Board of State Examiners of Electricians. Knowledge of state and local electrical codes. Knowledge of inspection techniques used in the electrical trade. Knowledge of safety practices and precautions observed in the electrical trade. Ability to follow oral and written instructions. Ability to perform arithmetical computations with speed and accuracy. Ability to climb and work from ladders and scaffolds. Elevator Repairperson: Possession of a current and valid License as an Maintenance Man and Repairman issued by the Massachusetts Dept. of Public Safety. Knowledge of the principles of operations of elevators, escalators, and hoisting systems. Knowledge of the methods followed in the repair and maintenance of elevators and related machinery. Knowledge of safety practices and procedures followed in connection with maintenance. Skill in the operation of freight and passenger elevators and related machinery. Ability to understand and apply the laws, rules, regulations, policies, procedures, specifications, standards, and guidelines governing elevators and related machinery. Ability to read and interpret such documents as technical and equipment operation manuals, plans, specifications, blueprints, etc. HVAC Technician: Possession of a current and valid Massachusetts journeyman license in a related field or an equivalent combination of education and experience. Experience in interpreting blueprints and plans, estimating costs for renovations, maintenance/repair of HVAC systems. Experience in the use and operation of power tools and other equipment. Knowledge of the laws, rules, and regulations governing HVAC systems. Knowledge of state building codes. Ability to follow written and oral instructions. Ability to perform arithmetical computations with speed and accuracy. Locksmith: Must have at least four years of full-time experience in locksmithing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the methods and techniques used in installing and repair of lock or lock assemblies. Knowledge of the types and uses of small hand tools and uses of precision measuring equipment. Skill in the methods and techniques of making and cutting keys. Ability to exercise discretion in handling confidential information. Ability to maintain accurate records. Ability to follow written and oral instructions. Ability to read and interpret such documents as plans, specifications, blueprints, etc Mason/Plasterer: Must have at least (2) two years of full-time experience as stonemason, marble setter, bricklayer or plaster, or any combination of the required experience. A diploma or certificate from a recognized trade or vocational school, may be substituted for a maximum of one year of experience. Knowledge of standard practices, methods and techniques of masonry. Knowledge of the types and uses of materials used in masonry such as brick, stone, sand, etc. Knowledge of the types and uses of equipment used in masonry such as portable mixers, etc. Knowledge and skill in the types and uses of small hand tools used in masonry such as spades, chisels, trowels, etc. Knowledge of types of masonry bonds. Knowledge of types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging. Skills in the use of masonry equipment such as portable mixers. Ability to follow written instructions. Ability to read and interpret documents such as plans, blueprints, drawings, etc. Ability to climb and work from ladders and scaffolds. Painter: Must have at least three years of full-time experience in painting work or a combination of two year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the practices and techniques of painting. Knowledge of the types and uses of painting materials such as paint, varnishes, and stains. Knowledge of the types of finishes used in painting. Knowledge of the methods of preparation of wood, metal, glass, plaster, cement, and other materials and surfaces for painting. Knowledge of chemical solvents used to prepare surfaces for painting and cleanup. Ability to climb and work from ladders and scaffolds. Knowledge and skill in the types and uses of painting tools such as brushes, rollers, spray machine guns, etc. Knowledge and skill in the types and uses of small hand held tools and power tools such as chisels, drills, power saws, etc. Knowledge of the properties and characteristics of wood. Knowledge of the practices and techniques of mixing and matching paints. Knowledge of the types and uses of safety or climbing equipment used in painting such as scaffolds and ladders. Skill in applying paints and other finishes by brush, cloth, air gun, etc. Skill in using painting equipment such as hand and power-operated paint chippers, sand blasting equipment, etc. Plumber: Possession of a current and valid Massachusetts journeyman plumber's license issued by the Board of State Examiners of Plumbers and Gas Fitters. Knowledge of laws, rules, and regulations governing plumbing. Ability to follow oral and written instructions. Ability to lift and carry heavy objects. Physical stamina and endurance. Ability to maintain accurate records. Roofer: Must have at least two years of full-time experience in roofing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the types and uses of small measurement devices, hand held power tools, and equipment used in roofing. Knowledge of safety practices and procedures followed in roofing. Knowledge of the types and uses of materials used in roofing. Knowledge of the safety practices, methods and techniques of roofing. Skill in the use of small measurement devices, hand held power tools, and equipment used in roofing. Ability to climb and work from ladders and scaffold Closing Date/Time: 2024-07-31
Title: Senior Maintenance Technician- Salem Pay Grade: Grade 13 Starting Pay: $54,593.18/Yr. Departmental Mission Statement: The Facilities Management Department of Trial Court provides for the management and maintenance of 63 state-owned courthouses located in ten counties of the Commonwealth. The Department is committed to administering effective property management, and for ensuring the delivery of quality services necessary for the efficient and reliable operation of all of the facilities which it maintains. FACILITES MANAGEMENT & CAPITAL PLANNING ORGANIZATIONAL PROFILE: Notes: Candidate must be licensed as an Electrician, HVAC or a Plumber. The hours for this position is 6am-2pm. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. This position may have occasional travel. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. Position Summary: This series is responsible for performing the full range of skilled trade position duties for both licensed and unlicensed trades. Typical duties include repairing, installing and testing various types of systems and equipment. These positions may also frequently include the application of complex materials and compounds consistent with general contracting work. The title above the entry level requires the performance of increasingly more responsible and varied work which requires advanced skill and experience with regard to the various licensed and unlicensed trades. Employees are appointed at the entry level position title and are eligible for reclassification to a higher level position within this series consistent with the specifications for the higher level position title. The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Reports to a Facilities Supervisor performing structured but not always routine work; Moderate judgment is required. Senior Maintenance Tech I (13) - This is the entry level position within this series. Employees at this level are expected to perform plumbing, electrical, carpentry, HVAC, painting, and other trades and technical work in their area of expertise. Employees are expected to have an established area specialization developed through training and experience and can work independently. Senior Maintenance Tech II (14) - This is the second level within the series. These employees are generally involved in projects of a larger scope and complexity consistent with experience and training. The Senior Maintenance Tech II engages in more complex project assignments and has a higher degree of contact with court officials. Senior Maintenance Tech IIs take lead roles in the completion of projects. Employees are required to work a minimum of three years as a Senior Maintenance Tech I before being eligible to reclassify to the higher level. Senior Maintenance Tech II positions also require the employee to hold a trade or technical license if applicable in their area of specialization prior to applying for reclassification. Senior Maintenance Technician Duties: The following list of major duties represents a composite list of typical duties performed by individuals in various areas of specialization. Specific duties performed by an incumbent will vary depending upon the Division, designated assignment, and level of the employee. All positions may perform related duties as required. Carpenter Maintains buildings and related structures applying carpentry techniques and using carpentry tools to construct, alter, repair and/or install walls, stairs, floors, ceilings, windows, doors, roofs, gutters, locks, air-conditioners, handicapped chair rails and ramps, shelving, etc. Inspect buildings needing carpentry repair or alterations, estimates job duration and the cost and/or quantities of labor and materials needed to complete the job. Interprets and/or draws up sketches, patterns, blueprints, instructions and/or layouts of work to be done. Perform structural repair, alteration or improvement work such as lowering ceilings and paneling rooms; preparing surfaces for plaster or cement work; studding, wiring and plastering walls and cracks in floors or around windows; taping joints on sheetrock; and pre-cementing and/or replacing formica tops. Confers with various department heads or managers regarding handling of emergencies, the feasibility of performing repair or alterations and the scheduling of work. Performs related work such as framing pictures; making window and door screens; drilling holes in signs; ordering materials and supplies and cleaning; and sharpening and tempering various tools and equipment. Electrician Tests, repairs, installs and /or maintains various types of electrical systems and equipment by operating the appropriate equipment and tools to ensure proper maintenance and functioning of necessary equipment. Troubleshoots electrical and related equipment using necessary electrical equipment and by reading schematics, diagrams and outlines to identify and correct operational problems. Maintain an adequate inventory of equipment and materials. Elevator Repairperson The following list of major duties represents a composite list of typical duties performed by individuals in this position. Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division. Inspects and tests elevators and related machinery to ensure that they meet legal operating requirements. Review plans and specifications for proposed installations or alterations of elevators and related machinery. Test elevators to ensure the receipt of certificates of inspections. Provide technical assistance by responding orally or in writing to inquiries. Perform periodic inspections in compliance with public safety requirements. Coordinates and schedules inspections with other agencies and contractors maintaining personal logs, compiles statistical data and represents the agency at hearing or meetings. HVAC Technician Installs, repairs, alters and maintains existing heating, venting and air conditioning (HVAC) equipment and systems. Troubleshoots HVAC equipment and systems. Run standard tests to determine whether finished work meets specifications. Inspect facility to determine the need for maintenance and repair to HVAC equipment. Establish priorities and make recommendations concerning work activities. Locksmith Install lock devices in doors, desks, office equipment and other units. Repairs and/or overhauls locking devices such as mortise, rim, key-in-the knob locks, dead bolt, office equipment, padlocks and emergency exit locks by repairing for replacing worn tumblers, springs or other parts of locking devices; by making alterations to locking mechanisms and units; and/or by replacing escutcheons and face plates on doors to change the size of existing holes to assure correct Fitchburg District Court. Repairs and/or installs locks containing dual locking capabilities by reworking locking devices designed to work in conjunction with other components and equipment to form a complete security or surveillance system. Changes lock combinations by inserting new or repaired tumblers into locks in order to increase security. Mason/Plasterer Lays brick, stone and cement blocks using a variety of hand and power tools such as brick or napping hammer, brick or shill saw, pick, chisel and hammer to build, alter, repair and /or maintain brick and/or concrete surfaces and structures such as sidewalks, partitions, floors, chimneys, etc. Plasters walls and ceilings. Prepare surfaces for plastering or cement work. Pours concrete in molds or forms to make slabs or blocks .Erects and dismantles scaffolding, riggings, and/or ladders. Reads instructions and interprets blueprints and sketches to determine work to be done. Repairs masonry and walls by patching with cement or plaster. Tape joints on sheetrock Perform related duties such as caulking and waterproofing cracks in walls and floors; coring holes through cement or marble floors; cleaning tools and equipment; laying-out cement or marble floors; cleaning tools and equipment; laying-out drop cloths; studding, wiring, and plastering door and window openings, etc. Order materials and supplies. Repair and maintain power tools to ensure proper operation. Painter Applies paints, varnish, and/or stains to all types of surfaces(e.g. wood, metal, plaster, etc.) In order to protect and beautify such surfaces using appropriate utensils and equipment such as paint spraying machines. Prepares surfaces for painting using appropriate tools, equipment and techniques. Selects the types and color of paints, varnish or stain and mixes, blends and prepares the same for proper color match. Erects, repairs, maintains and operates staging, and scaffolding following accepted safety practices in order to gain access to areas needing painting. Estimates length of time, cost and quantities of materials and manpower needed to complete a job. Operates, cleans and maintains hand and power tools, air compressors and painting equipment. Confers with supervisors and department heads regarding the scheduling of work, the handling of emergencies and the feasibility of installing painting equipment and materials in the area in order to ensure that needs of the agency are met expeditiously and at a convenient time. Prepares surfaces for plaster or cement work by taping joints on sheetrock, caulking and waterproofing walls and cracks in floors, etc. by using appropriate tools and equipment. Performs related duties such as preparing various reports; maintaining records and files; setting up signs and barricades; reading instructions on lay-outs; removing and replacing glass; drilling holes in signs; printing letters and signs; laying out drop cloths; and moving office furniture. Based on assignment, may operate road-line painting machines and sand blasting equipment. Read and/or interpret blueprints, sketches, instructions or layouts to understand work to be done. Plumber Install, repairs, and alters steam plumbing systems. Reads and interprets blueprints, sketches, instructions or layouts to understand construction work to be done. Schedules installation, maintenance, and/or repair work by conferring with supervisors and other department personnel to determine location of equipment and appropriate time to complete the project. Estimates length of time, cost of materials and manpower needed to develop a project budget. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas: Ethics and Values Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. Mission Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. Problem Solving Accurately assesses maintenance problems of a routine nature and initiates corrective action. Continuous Learning Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. Commitment to Diversity Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. Customer Service Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. Collaboration Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Senior Maintenance Technician: A high school diploma or equivalent; and, the following required experience and abilities in one or more of the following skilled trades or areas of specialization: Carpenter: Must have at least four years of full-time experience in carpentry, woodworking or cabinet-making work or a combination of two years' experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the principles and techniques of carpentry. Knowledge of the types of building structures. Knowledge of the types of material used in carpentry. Knowledge of the types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging, etc. Knowledge and skill in the types and uses of small hand held tools such as hammers, saws, screwdrivers, chisels, drills, etc. Knowledge and skill in the types and uses of tools used in carpentry bench work. Knowledge and skill in the types and uses of small measurement devices such as power saws, power drills, power hammers, etc. Electrician: Possession of a current and valid Massachusetts journeyman electrician's license issued by the Board of State Examiners of Electricians. Knowledge of state and local electrical codes. Knowledge of inspection techniques used in the electrical trade. Knowledge of safety practices and precautions observed in the electrical trade. Ability to follow oral and written instructions. Ability to perform arithmetical computations with speed and accuracy. Ability to climb and work from ladders and scaffolds. Elevator Repairperson: Possession of a current and valid License as an Maintenance Man and Repairman issued by the Massachusetts Dept. of Public Safety. Knowledge of the principles of operations of elevators, escalators, and hoisting systems. Knowledge of the methods followed in the repair and maintenance of elevators and related machinery. Knowledge of safety practices and procedures followed in connection with maintenance. Skill in the operation of freight and passenger elevators and related machinery. Ability to understand and apply the laws, rules, regulations, policies, procedures, specifications, standards, and guidelines governing elevators and related machinery. Ability to read and interpret such documents as technical and equipment operation manuals, plans, specifications, blueprints, etc. HVAC Technician: Possession of a current and valid Massachusetts journeyman license in a related field or an equivalent combination of education and experience. Experience in interpreting blueprints and plans, estimating costs for renovations, maintenance/repair of HVAC systems. Experience in the use and operation of power tools and other equipment. Knowledge of the laws, rules, and regulations governing HVAC systems. Knowledge of state building codes. Ability to follow written and oral instructions. Ability to perform arithmetical computations with speed and accuracy. Locksmith: Must have at least four years of full-time experience in locksmithing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the methods and techniques used in installing and repair of lock or lock assemblies. Knowledge of the types and uses of small hand tools and uses of precision measuring equipment. Skill in the methods and techniques of making and cutting keys. Ability to exercise discretion in handling confidential information. Ability to maintain accurate records. Ability to follow written and oral instructions. Ability to read and interpret such documents as plans, specifications, blueprints, etc Mason/Plasterer: Must have at least (2) two years of full-time experience as stonemason, marble setter, bricklayer or plaster, or any combination of the required experience. A diploma or certificate from a recognized trade or vocational school, may be substituted for a maximum of one year of experience. Knowledge of standard practices, methods and techniques of masonry. Knowledge of the types and uses of materials used in masonry such as brick, stone, sand, etc. Knowledge of the types and uses of equipment used in masonry such as portable mixers, etc. Knowledge and skill in the types and uses of small hand tools used in masonry such as spades, chisels, trowels, etc. Knowledge of types of masonry bonds. Knowledge of types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging. Skills in the use of masonry equipment such as portable mixers. Ability to follow written instructions. Ability to read and interpret documents such as plans, blueprints, drawings, etc. Ability to climb and work from ladders and scaffolds. Painter: Must have at least three years of full-time experience in painting work or a combination of two year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the practices and techniques of painting. Knowledge of the types and uses of painting materials such as paint, varnishes, and stains. Knowledge of the types of finishes used in painting. Knowledge of the methods of preparation of wood, metal, glass, plaster, cement, and other materials and surfaces for painting. Knowledge of chemical solvents used to prepare surfaces for painting and cleanup. Ability to climb and work from ladders and scaffolds. Knowledge and skill in the types and uses of painting tools such as brushes, rollers, spray machine guns, etc. Knowledge and skill in the types and uses of small hand held tools and power tools such as chisels, drills, power saws, etc. Knowledge of the properties and characteristics of wood. Knowledge of the practices and techniques of mixing and matching paints. Knowledge of the types and uses of safety or climbing equipment used in painting such as scaffolds and ladders. Skill in applying paints and other finishes by brush, cloth, air gun, etc. Skill in using painting equipment such as hand and power-operated paint chippers, sand blasting equipment, etc. Plumber: Possession of a current and valid Massachusetts journeyman plumber's license issued by the Board of State Examiners of Plumbers and Gas Fitters. Knowledge of laws, rules, and regulations governing plumbing. Ability to follow oral and written instructions. Ability to lift and carry heavy objects. Physical stamina and endurance. Ability to maintain accurate records. Roofer: Must have at least two years of full-time experience in roofing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the types and uses of small measurement devices, hand held power tools, and equipment used in roofing. Knowledge of safety practices and procedures followed in roofing. Knowledge of the types and uses of materials used in roofing. Knowledge of the safety practices, methods and techniques of roofing. Skill in the use of small measurement devices, hand held power tools, and equipment used in roofing. Ability to climb and work from ladders and scaffold Closing Date/Time: 2024-07-31