Minimum Qualifications Instrumentation & Control Technician I: Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent, plus two (2) years of experience in the repair, installation, maintenance, and calibration of instrumentation and control system equipment in a water, wastewater or similar industrial process control facility. OR Graduation with an Associate of Arts or Science Technology degree from an accredited college or university in a field related to instrumentation or control systems. Licenses and Certifications Required: Valid Texas Class C Driver License Instrumentation & Control Technician II: Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent, plus four (4) years of experience in the repair, installation, maintenance, and calibration of instrumentation and control system equipment, or a related field, including two (2) years of instrumentation & control experience in a water and wastewater treatment facility or a similar industrial process control facility. OR Graduation with an Associate of Arts or Science Technology degree from an accredited college or university in a field related to instrumentation or control systems, plus two (2) years of instrumentation & control experience in a water and wastewater treatment facility or a closely related process facility. Licenses and Certifications Required: Valid Texas Class C Driver License. Notes to Applicants This position completes the calibration, installation, repairs and modification of instrumentation starter controls and complex rotating/moving equipment for the Instrument & Control Maintenance Division of the Operations -Treatment Program Area of Austin Water. Retention Incentive Bonus: This position may be eligible for an Incentive Bonus of up to $3,000! $500 after 90 days $500 after 180 days $1,000 after 1 year $1,000 after 2 years This position will be filled at one of the following levels depending upon qualifications: Instrumentation & Control Technician I Salary Range: $27.16 to $32.87 per hour Instrumentation & Control Technician II Salary Range: $30.29 to $37.86 per hour The incumbent in this position may be asked to report to one or more of the following locations: Lift Stations Various locations Hornsby Bend Biosolids Plant 2210 S. FM 973, Austin, TX 78725 South Austin Regional Wastewater Treatment Plant 1017 Fallwell Lane, Austin TX, 78717 Walnut Creek Wastewater Treatment Plant 7113 FM 969, Austin, TX 78724 Davis Water Treatment Plant 3500 W. 35th Street, Austin, Texas 78703 Water Treatment Plant 4 6800 North F. M. 620, Austin, Texas 78732 Ullrich Water Treatment Plant 1000 Forest View Dr., Austin, Texas 78746 Pump Stations & Reservoirs - South Service Support Center 3616 S. First St., Austin, Texas 78704 Work location and shift assignment for candidates selected will be determined based on business need and is subject to change at management’s discretion. This position will be required to work overtime and on-call shifts, which include nights, weekends and holidays. Working with Austin Water provides a number of health and welfare benefits such as low-cost medical, dental, vision, paid leave time, a highly competitive retirement plan, training opportunities and more. Please click HERE for more information. When completing the City of Austin employment application: Please be sure to detail on the application all previous employment that you wish to be considered as part of your qualifications. A detailed, complete employment application is required. It helps us to better evaluate your qualifications and will be used to determine salary if you are selected for this position. Be sure to provide job title and employment dates for all jobs you wish to be considered. Please refer to the preferred qualifications listed in this posting when completing the “Duties and Responsibilities” section for each job listed on your application, describing which preferred qualifications are applicable for that position including any preferred software used. If you are selected to interview: Your skill level in some of the competency areas for this job will be assessed through an online or in-person skills testing appointment in Austin, TX. A passing score is 70%. If you are selected as a top candidate: Verification of your education (which may include high school graduation or GED , undergraduate and/or graduate degrees) will be required. You must provide proof of education from an accredited organization/institution. And are in the military or a veteran, you will need to provide a copy of your DD-214 prior to confirming a start date. Driving Requirement: This position requires a Valid Texas Class C Driver License or the ability to acquire one by your hire date. External New Hires must meet the City of Austin’s Driver Record Evaluation ( DRE ) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. Physical Requirements: This position will require that you be able to perform the following essential job functions with confidence and with or without reasonable accommodations: Occasional carrying or lifting up to 50 lbs., occasional pushing or pulling up to 50 lbs., frequent standing and walking, occasional sitting and lying, frequent climbing of stairs and ladders, occasional reaching overhead, crawling, and twisting, frequent kneeling, stooping/bending, and repetitive hand/foot movement, far and near vision with color differentiation, hearing and communicating, frequent finger dexterity, grasping or squeezing, traveling to work sites, ability to wear personal protective equipment, exposure to extreme weather conditions, atmospheric and hazardous conditions and very loud noise. Selected candidate will be required to complete and pass a pre-employment physical exam to be considered for this position, which includes a Functional (FC) strength/agility test. Confined Space Entry and Climbing Requirements: Candidates must be able to work in environments which may have hazardous atmospheres or in confined spaces where there is limited or restricted means for entry and exit, or where the activities of an employee are hindered. Candidates must be able to perform duties with confidence at sites where climbing heights of up to 200 feet is required on ladders that support up to 300 lbs. Secondary Employment: All Austin Water employees are prohibited from accepting or engaging in any secondary employment that might conflict or interfere with an employee’s duty and responsibility to the Department. AW must review all secondary employment. Employees are required to submit a Secondary Employment Application for review and approval upon being hired with Austin Water, as well as current Austin Water employees considering Secondary Employment. All Austin Water worksite locations are tobacco-free. Use of tobacco products and/or e-cigarettes is not permitted on any AW worksite - including construction sites, parking lots, garages or in any personal vehicle located on the premises. Pay Range See Notes to Applicants Hours Monday through Friday; 6:30 a.m. to 3:00 p.m. This position will be required to work on-call shifts on a rotating basis, including nights, weekends and holidays. Overtime and call-back time will vary and are required for this position. Job Close Date 06/04/2024 Type of Posting External Department Austin Water Utility Regular/Temporary Regular Grant Funded or Pooled Position Not Applicable Category Technical Location See Notes to Applicants Preferred Qualifications Preferred Experience: Associate of Applied Science degree specifically in the field of instrumentation or control systems technology, electronics, or related field. Demonstration of strong technical knowledge and experience in the maintenance and calibration of instrumentation and control systems equipment such as pressure transmitters/transducers, level sensors, flow meters, PLC’s and pump/motor control circuitry. Experience working in a water/wastewater facility or related process facility performing instrumentation & control maintenance. Duties, Functions and Responsibilities This position is posted at multiple levels. For Duties, Functions and Responsibilities, please select the appropriate job description below. Essential duties and functions, pursuant to the Americans with Disabilities Act, may include the following. Other related duties may be assigned. Instrumentation & Control Technician I Instrumentation & Control Technician II Knowledge, Skills and Abilities This position is posted at multiple levels. For Knowledge, Skills and Abilities, please select the appropriate job description below. Must possess required knowledge, skills, abilities, and experience and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed. Instrumentation & Control Technician I Instrumentation & Control Technician II Criminal Background Investigation This position does not require a Criminal Background Investigation EEO/ADA City of Austin is committed to compliance with the Americans with Disabilities Act. If you require reasonable accommodation during the application process or have a question regarding an essential job function, please call (512) 974-3210 or Texas Relay by dialing 7-1-1. The City of Austin will not discriminate against any applicant or employee based on race, creed, color, national origin, sex, gender identity, age, religion, veteran status, disability, or sexual orientation. In addition, the City will not discriminate in employment decisions on the basis of an individual’s AIDS , AIDS Related Complex, or HIV status; nor will the City discriminate against individuals who are perceived to be at risk of HIV infection, or who associate with individuals who are believed to be at risk. Information For City Employees: If you are an employee within the department, are in good standing and meet both the minimum and preferred qualifications, then you will receive an initial interview. Supplemental Questions Required fields are indicated with an asterisk (*). * The minimum qualifications for the Instrumentation & Control Technician I position are: Graduation from an accredited high school or equivalent, plus two (2) years of experience in the repair, installation, maintenance, and calibration of instrumentation and control system equipment in a water, wastewater or similar industrial process control facility OR Graduation with an Associate of Arts or Science Technology degree from an accredited college or university in a field related to instrumentation or control systems. Do you meet these minimum qualifications? Yes No * Select the item(s) that you have experience installing: Pressure Transmitters and Transducers Analyzers Level Sensors Flow Meters Pump and/Motor Control Circuitry PLC’s No Experience * Select the item(s) that you have experience calibrating: Pressure Transmitters and Transducers Analyzers Level Sensors Flow Meters Pump and/Motor Control Circuitry No Experience * Select the item(s) that you have experience repairing and maintaining: Pressure Transmitters and Transducers Analyzers Level Sensors Flow Meters Pump and/Motor Control Circuitry PLC’s No Experience * How many years of experience do you have working in a Water and Wastewater facility or a closely-related process facility performing repair, installation, maintenance, and calibration of instrumentation and control system equipment? No experience Less than 2 years At least 2 years but less than 4 years At least 4 years but less than 6 years 6 or more years * This position requires a valid Texas Class C Driver License. Do you have a valid Texas Class C Driver License or, if selected for this position, do you have the ability to acquire a valid Texas Class C Driver License by your hire date? Yes No * The City of Austin Driver Eligibility Standards require that External New Hires meet the City’s Driver Record Evaluation (DRE) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. Do you meet this requirement? Yes No * This position will require you to be able to occasionally carry, lift, push, or pull up to 50 lbs. unassisted, wear personal protective equipment, be exposed to extreme weather conditions, atmospheric and hazardous conditions and very loud noise. This position will require that you be able to perform duties with confidence descending into confined spaces and climbing heights of up to 200 feet on ladders that support up to 300 lbs. Are you able to perform these duties with or without reasonable accommodations? Yes No * Were you referred to this opportunity by an Austin Water employee? If yes, please provide the employee’s full name. (Open Ended Question) Optional & Required Documents Required Documents Optional Documents
May 14, 2024
Full Time
Minimum Qualifications Instrumentation & Control Technician I: Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent, plus two (2) years of experience in the repair, installation, maintenance, and calibration of instrumentation and control system equipment in a water, wastewater or similar industrial process control facility. OR Graduation with an Associate of Arts or Science Technology degree from an accredited college or university in a field related to instrumentation or control systems. Licenses and Certifications Required: Valid Texas Class C Driver License Instrumentation & Control Technician II: Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent, plus four (4) years of experience in the repair, installation, maintenance, and calibration of instrumentation and control system equipment, or a related field, including two (2) years of instrumentation & control experience in a water and wastewater treatment facility or a similar industrial process control facility. OR Graduation with an Associate of Arts or Science Technology degree from an accredited college or university in a field related to instrumentation or control systems, plus two (2) years of instrumentation & control experience in a water and wastewater treatment facility or a closely related process facility. Licenses and Certifications Required: Valid Texas Class C Driver License. Notes to Applicants This position completes the calibration, installation, repairs and modification of instrumentation starter controls and complex rotating/moving equipment for the Instrument & Control Maintenance Division of the Operations -Treatment Program Area of Austin Water. Retention Incentive Bonus: This position may be eligible for an Incentive Bonus of up to $3,000! $500 after 90 days $500 after 180 days $1,000 after 1 year $1,000 after 2 years This position will be filled at one of the following levels depending upon qualifications: Instrumentation & Control Technician I Salary Range: $27.16 to $32.87 per hour Instrumentation & Control Technician II Salary Range: $30.29 to $37.86 per hour The incumbent in this position may be asked to report to one or more of the following locations: Lift Stations Various locations Hornsby Bend Biosolids Plant 2210 S. FM 973, Austin, TX 78725 South Austin Regional Wastewater Treatment Plant 1017 Fallwell Lane, Austin TX, 78717 Walnut Creek Wastewater Treatment Plant 7113 FM 969, Austin, TX 78724 Davis Water Treatment Plant 3500 W. 35th Street, Austin, Texas 78703 Water Treatment Plant 4 6800 North F. M. 620, Austin, Texas 78732 Ullrich Water Treatment Plant 1000 Forest View Dr., Austin, Texas 78746 Pump Stations & Reservoirs - South Service Support Center 3616 S. First St., Austin, Texas 78704 Work location and shift assignment for candidates selected will be determined based on business need and is subject to change at management’s discretion. This position will be required to work overtime and on-call shifts, which include nights, weekends and holidays. Working with Austin Water provides a number of health and welfare benefits such as low-cost medical, dental, vision, paid leave time, a highly competitive retirement plan, training opportunities and more. Please click HERE for more information. When completing the City of Austin employment application: Please be sure to detail on the application all previous employment that you wish to be considered as part of your qualifications. A detailed, complete employment application is required. It helps us to better evaluate your qualifications and will be used to determine salary if you are selected for this position. Be sure to provide job title and employment dates for all jobs you wish to be considered. Please refer to the preferred qualifications listed in this posting when completing the “Duties and Responsibilities” section for each job listed on your application, describing which preferred qualifications are applicable for that position including any preferred software used. If you are selected to interview: Your skill level in some of the competency areas for this job will be assessed through an online or in-person skills testing appointment in Austin, TX. A passing score is 70%. If you are selected as a top candidate: Verification of your education (which may include high school graduation or GED , undergraduate and/or graduate degrees) will be required. You must provide proof of education from an accredited organization/institution. And are in the military or a veteran, you will need to provide a copy of your DD-214 prior to confirming a start date. Driving Requirement: This position requires a Valid Texas Class C Driver License or the ability to acquire one by your hire date. External New Hires must meet the City of Austin’s Driver Record Evaluation ( DRE ) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. Physical Requirements: This position will require that you be able to perform the following essential job functions with confidence and with or without reasonable accommodations: Occasional carrying or lifting up to 50 lbs., occasional pushing or pulling up to 50 lbs., frequent standing and walking, occasional sitting and lying, frequent climbing of stairs and ladders, occasional reaching overhead, crawling, and twisting, frequent kneeling, stooping/bending, and repetitive hand/foot movement, far and near vision with color differentiation, hearing and communicating, frequent finger dexterity, grasping or squeezing, traveling to work sites, ability to wear personal protective equipment, exposure to extreme weather conditions, atmospheric and hazardous conditions and very loud noise. Selected candidate will be required to complete and pass a pre-employment physical exam to be considered for this position, which includes a Functional (FC) strength/agility test. Confined Space Entry and Climbing Requirements: Candidates must be able to work in environments which may have hazardous atmospheres or in confined spaces where there is limited or restricted means for entry and exit, or where the activities of an employee are hindered. Candidates must be able to perform duties with confidence at sites where climbing heights of up to 200 feet is required on ladders that support up to 300 lbs. Secondary Employment: All Austin Water employees are prohibited from accepting or engaging in any secondary employment that might conflict or interfere with an employee’s duty and responsibility to the Department. AW must review all secondary employment. Employees are required to submit a Secondary Employment Application for review and approval upon being hired with Austin Water, as well as current Austin Water employees considering Secondary Employment. All Austin Water worksite locations are tobacco-free. Use of tobacco products and/or e-cigarettes is not permitted on any AW worksite - including construction sites, parking lots, garages or in any personal vehicle located on the premises. Pay Range See Notes to Applicants Hours Monday through Friday; 6:30 a.m. to 3:00 p.m. This position will be required to work on-call shifts on a rotating basis, including nights, weekends and holidays. Overtime and call-back time will vary and are required for this position. Job Close Date 06/04/2024 Type of Posting External Department Austin Water Utility Regular/Temporary Regular Grant Funded or Pooled Position Not Applicable Category Technical Location See Notes to Applicants Preferred Qualifications Preferred Experience: Associate of Applied Science degree specifically in the field of instrumentation or control systems technology, electronics, or related field. Demonstration of strong technical knowledge and experience in the maintenance and calibration of instrumentation and control systems equipment such as pressure transmitters/transducers, level sensors, flow meters, PLC’s and pump/motor control circuitry. Experience working in a water/wastewater facility or related process facility performing instrumentation & control maintenance. Duties, Functions and Responsibilities This position is posted at multiple levels. For Duties, Functions and Responsibilities, please select the appropriate job description below. Essential duties and functions, pursuant to the Americans with Disabilities Act, may include the following. Other related duties may be assigned. Instrumentation & Control Technician I Instrumentation & Control Technician II Knowledge, Skills and Abilities This position is posted at multiple levels. For Knowledge, Skills and Abilities, please select the appropriate job description below. Must possess required knowledge, skills, abilities, and experience and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed. Instrumentation & Control Technician I Instrumentation & Control Technician II Criminal Background Investigation This position does not require a Criminal Background Investigation EEO/ADA City of Austin is committed to compliance with the Americans with Disabilities Act. If you require reasonable accommodation during the application process or have a question regarding an essential job function, please call (512) 974-3210 or Texas Relay by dialing 7-1-1. The City of Austin will not discriminate against any applicant or employee based on race, creed, color, national origin, sex, gender identity, age, religion, veteran status, disability, or sexual orientation. In addition, the City will not discriminate in employment decisions on the basis of an individual’s AIDS , AIDS Related Complex, or HIV status; nor will the City discriminate against individuals who are perceived to be at risk of HIV infection, or who associate with individuals who are believed to be at risk. Information For City Employees: If you are an employee within the department, are in good standing and meet both the minimum and preferred qualifications, then you will receive an initial interview. Supplemental Questions Required fields are indicated with an asterisk (*). * The minimum qualifications for the Instrumentation & Control Technician I position are: Graduation from an accredited high school or equivalent, plus two (2) years of experience in the repair, installation, maintenance, and calibration of instrumentation and control system equipment in a water, wastewater or similar industrial process control facility OR Graduation with an Associate of Arts or Science Technology degree from an accredited college or university in a field related to instrumentation or control systems. Do you meet these minimum qualifications? Yes No * Select the item(s) that you have experience installing: Pressure Transmitters and Transducers Analyzers Level Sensors Flow Meters Pump and/Motor Control Circuitry PLC’s No Experience * Select the item(s) that you have experience calibrating: Pressure Transmitters and Transducers Analyzers Level Sensors Flow Meters Pump and/Motor Control Circuitry No Experience * Select the item(s) that you have experience repairing and maintaining: Pressure Transmitters and Transducers Analyzers Level Sensors Flow Meters Pump and/Motor Control Circuitry PLC’s No Experience * How many years of experience do you have working in a Water and Wastewater facility or a closely-related process facility performing repair, installation, maintenance, and calibration of instrumentation and control system equipment? No experience Less than 2 years At least 2 years but less than 4 years At least 4 years but less than 6 years 6 or more years * This position requires a valid Texas Class C Driver License. Do you have a valid Texas Class C Driver License or, if selected for this position, do you have the ability to acquire a valid Texas Class C Driver License by your hire date? Yes No * The City of Austin Driver Eligibility Standards require that External New Hires meet the City’s Driver Record Evaluation (DRE) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. Do you meet this requirement? Yes No * This position will require you to be able to occasionally carry, lift, push, or pull up to 50 lbs. unassisted, wear personal protective equipment, be exposed to extreme weather conditions, atmospheric and hazardous conditions and very loud noise. This position will require that you be able to perform duties with confidence descending into confined spaces and climbing heights of up to 200 feet on ladders that support up to 300 lbs. Are you able to perform these duties with or without reasonable accommodations? Yes No * Were you referred to this opportunity by an Austin Water employee? If yes, please provide the employee’s full name. (Open Ended Question) Optional & Required Documents Required Documents Optional Documents
Minimum Qualifications Instrumentation & Control Technician I: Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent, plus two (2) years of experience in the repair, installation, maintenance, and calibration of instrumentation and control system equipment in a water, wastewater or similar industrial process control facility. OR Graduation with an Associate of Arts or Science Technology degree from an accredited college or university in a field related to instrumentation or control systems. Licenses and Certifications Required: Valid Texas Class C Driver License Instrumentation & Control Technician II: Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent, plus four (4) years of experience in the repair, installation, maintenance, and calibration of instrumentation and control system equipment, or a related field, including two (2) years of instrumentation & control experience in a water and wastewater treatment facility or a similar industrial process control facility. OR Graduation with an Associate of Arts or Science Technology degree from an accredited college or university in a field related to instrumentation or control systems, plus two (2) years of instrumentation & control experience in a water and wastewater treatment facility or a closely related process facility. Licenses and Certifications Required: Valid Texas Class C Driver License. Notes to Applicants This position completes the calibration, installation, repairs and modification of instrumentation starter controls and complex rotating/moving equipment for the Instrument & Control Maintenance Division of the Operations -Treatment Program Area of Austin Water. This position will be filled at one of the following levels depending upon qualifications: Instrumentation & Control Technician I Salary Range: $27.16 to $32.87 per hour Instrumentation & Control Technician II Salary Range: $30.29 to $37.86 per hour The incumbent in this position may be asked to report to one or more of the following locations: Lift Stations Various locations Hornsby Bend Biosolids Plant 2210 S. FM 973, Austin, TX 78725 South Austin Regional Wastewater Treatment Plant 1017 Fallwell Lane, Austin TX, 78717 Walnut Creek Wastewater Treatment Plant 7113 FM 969, Austin, TX 78724 Davis Water Treatment Plant 3500 W. 35th Street, Austin, Texas 78703 Water Treatment Plant 4 6800 North F. M. 620, Austin, Texas 78732 Ullrich Water Treatment Plant 1000 Forest View Dr., Austin, Texas 78746 Pump Stations & Reservoirs - South Service Support Center 3616 S. First St., Austin, Texas 78704 Work location and shift assignment for candidates selected will be determined based on business need and is subject to change at management’s discretion. This position will be required to work overtime and on-call shifts, which include nights, weekends and holidays. Working with Austin Water provides a number of health and welfare benefits such as low-cost medical, dental, vision, paid leave time, a highly competitive retirement plan, training opportunities and more. Please click HERE for more information. When completing the City of Austin employment application: Please be sure to detail on the application all previous employment that you wish to be considered as part of your qualifications. A detailed, complete employment application is required. It helps us to better evaluate your qualifications and will be used to determine salary if you are selected for this position. Be sure to provide job title and employment dates for all jobs you wish to be considered. Please refer to the preferred qualifications listed in this posting when completing the “Duties and Responsibilities” section for each job listed on your application, describing which preferred qualifications are applicable for that position including any preferred software used. If you are selected to interview: Your skill level in some of the competency areas for this job will be assessed through an online or in-person skills testing appointment in Austin, TX. A passing score is 50%. If you are selected as a top candidate: Verification of your education (which may include high school graduation or GED , undergraduate and/or graduate degrees) will be required. You must provide proof of education from an accredited organization/institution. And are in the military or a veteran, you will need to provide a copy of your DD-214 prior to confirming a start date. Driving Requirement: This position requires a Valid Texas Class C Driver License or the ability to acquire one by your hire date. External New Hires must meet the City of Austin’s Driver Record Evaluation ( DRE ) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. Physical Requirements: This position will require that you be able to perform the following essential job functions with confidence and with or without reasonable accommodations: Occasional carrying or lifting up to 50 lbs., occasional pushing or pulling up to 50 lbs., frequent standing and walking, occasional sitting and lying, frequent climbing of stairs and ladders, occasional reaching overhead, crawling, and twisting, frequent kneeling, stooping/bending, and repetitive hand/foot movement, far and near vision with color differentiation, hearing and communicating, frequent finger dexterity, grasping or squeezing, traveling to work sites, ability to wear personal protective equipment, exposure to extreme weather conditions, atmospheric and hazardous conditions and very loud noise. Selected candidate will be required to complete and pass a pre-employment physical exam to be considered for this position, which includes a Functional (FC) strength/agility test. Confined Space Entry and Climbing Requirements: Candidates must be able to work in environments which may have hazardous atmospheres or in confined spaces where there is limited or restricted means for entry and exit, or where the activities of an employee are hindered. Candidates must be able to perform duties with confidence at sites where climbing heights of up to 200 feet is required on ladders that support up to 300 lbs. Secondary Employment: All Austin Water employees are prohibited from accepting or engaging in any secondary employment that might conflict or interfere with an employee’s duty and responsibility to the Department. AW must review all secondary employment. Employees are required to submit a Secondary Employment Application for review and approval upon being hired with Austin Water, as well as current Austin Water employees considering Secondary Employment. All Austin Water worksite locations are tobacco-free. Use of tobacco products and/or e-cigarettes is not permitted on any AW worksite - including construction sites, parking lots, garages or in any personal vehicle located on the premises. Pay Range See Notes to Applicants Hours Monday through Friday; 6:30 a.m. to 3:00 p.m. This position will be required to work on-call shifts on a rotating basis, including nights, weekends and holidays. Overtime and call-back time will vary and are required for this position. Job Close Date 06/04/2024 Type of Posting External Department Austin Water Utility Regular/Temporary Temporary (No benefits) Grant Funded or Pooled Position Not Applicable Category Technical Location See Notes to Applicants Preferred Qualifications Preferred Experience: Associate of Applied Science degree specifically in the field of instrumentation or control systems technology, electronics, or related field. Demonstration of strong technical knowledge and experience in the maintenance and calibration of instrumentation and control systems equipment such as pressure transmitters/transducers, level sensors, flow meters, PLC’s and pump/motor control circuitry. Experience working in a water/wastewater facility or related process facility performing instrumentation & control maintenance. Duties, Functions and Responsibilities This position is posted at multiple levels. For Duties, Functions and Responsibilities, please select the appropriate job description below. Essential duties and functions, pursuant to the Americans with Disabilities Act, may include the following. Other related duties may be assigned. Instrumentation & Control Technician I Instrumentation & Control Technician II Knowledge, Skills and Abilities This position is posted at multiple levels. For Knowledge, Skills and Abilities, please select the appropriate job description below. Must possess required knowledge, skills, abilities, and experience and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed. Instrumentation & Control Technician I Instrumentation & Control Technician II Criminal Background Investigation This position does not require a Criminal Background Investigation EEO/ADA City of Austin is committed to compliance with the Americans with Disabilities Act. If you require reasonable accommodation during the application process or have a question regarding an essential job function, please call (512) 974-3210 or Texas Relay by dialing 7-1-1. The City of Austin will not discriminate against any applicant or employee based on race, creed, color, national origin, sex, gender identity, age, religion, veteran status, disability, or sexual orientation. In addition, the City will not discriminate in employment decisions on the basis of an individual’s AIDS , AIDS Related Complex, or HIV status; nor will the City discriminate against individuals who are perceived to be at risk of HIV infection, or who associate with individuals who are believed to be at risk. Information For City Employees: If you are an employee within the department, are in good standing and meet both the minimum and preferred qualifications, then you will receive an initial interview. Supplemental Questions Required fields are indicated with an asterisk (*). * The minimum qualifications for the Instrumentation & Control Technician I position are: Graduation from an accredited high school or equivalent, plus two (2) years of experience in the repair, installation, maintenance, and calibration of instrumentation and control system equipment in a water, wastewater or similar industrial process control facility OR Graduation with an Associate of Arts or Science Technology degree from an accredited college or university in a field related to instrumentation or control systems. Do you meet these minimum qualifications? Yes No * Select the item(s) that you have experience installing: Pressure Transmitters and Transducers Analyzers Level Sensors Flow Meters Pump and/Motor Control Circuitry PLC’s No Experience * Select the item(s) that you have experience calibrating: Pressure Transmitters and Transducers Analyzers Level Sensors Flow Meters Pump and/Motor Control Circuitry No Experience * Select the item(s) that you have experience repairing and maintaining: Pressure Transmitters and Transducers Analyzers Level Sensors Flow Meters Pump and/Motor Control Circuitry PLC’s No Experience * How many years of experience do you have working in a Water and Wastewater facility or a closely-related process facility performing repair, installation, maintenance, and calibration of instrumentation and control system equipment? No experience Less than 2 years At least 2 years but less than 4 years At least 4 years but less than 6 years 6 or more years * This position requires a valid Texas Class C Driver License. Do you have a valid Texas Class C Driver License or, if selected for this position, do you have the ability to acquire a valid Texas Class C Driver License by your hire date? Yes No * The City of Austin Driver Eligibility Standards require that External New Hires meet the City’s Driver Record Evaluation (DRE) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. Do you meet this requirement? Yes No * This position will require you to be able to occasionally carry, lift, push, or pull up to 50 lbs. unassisted, wear personal protective equipment, be exposed to extreme weather conditions, atmospheric and hazardous conditions and very loud noise. This position will require that you be able to perform duties with confidence descending into confined spaces and climbing heights of up to 200 feet on ladders that support up to 300 lbs. Are you able to perform these duties with or without reasonable accommodations? Yes No * Were you referred to this opportunity by an Austin Water employee? If yes, please provide the employee’s full name. (Open Ended Question) Optional & Required Documents Required Documents Resume Optional Documents
May 22, 2024
Full Time
Minimum Qualifications Instrumentation & Control Technician I: Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent, plus two (2) years of experience in the repair, installation, maintenance, and calibration of instrumentation and control system equipment in a water, wastewater or similar industrial process control facility. OR Graduation with an Associate of Arts or Science Technology degree from an accredited college or university in a field related to instrumentation or control systems. Licenses and Certifications Required: Valid Texas Class C Driver License Instrumentation & Control Technician II: Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent, plus four (4) years of experience in the repair, installation, maintenance, and calibration of instrumentation and control system equipment, or a related field, including two (2) years of instrumentation & control experience in a water and wastewater treatment facility or a similar industrial process control facility. OR Graduation with an Associate of Arts or Science Technology degree from an accredited college or university in a field related to instrumentation or control systems, plus two (2) years of instrumentation & control experience in a water and wastewater treatment facility or a closely related process facility. Licenses and Certifications Required: Valid Texas Class C Driver License. Notes to Applicants This position completes the calibration, installation, repairs and modification of instrumentation starter controls and complex rotating/moving equipment for the Instrument & Control Maintenance Division of the Operations -Treatment Program Area of Austin Water. This position will be filled at one of the following levels depending upon qualifications: Instrumentation & Control Technician I Salary Range: $27.16 to $32.87 per hour Instrumentation & Control Technician II Salary Range: $30.29 to $37.86 per hour The incumbent in this position may be asked to report to one or more of the following locations: Lift Stations Various locations Hornsby Bend Biosolids Plant 2210 S. FM 973, Austin, TX 78725 South Austin Regional Wastewater Treatment Plant 1017 Fallwell Lane, Austin TX, 78717 Walnut Creek Wastewater Treatment Plant 7113 FM 969, Austin, TX 78724 Davis Water Treatment Plant 3500 W. 35th Street, Austin, Texas 78703 Water Treatment Plant 4 6800 North F. M. 620, Austin, Texas 78732 Ullrich Water Treatment Plant 1000 Forest View Dr., Austin, Texas 78746 Pump Stations & Reservoirs - South Service Support Center 3616 S. First St., Austin, Texas 78704 Work location and shift assignment for candidates selected will be determined based on business need and is subject to change at management’s discretion. This position will be required to work overtime and on-call shifts, which include nights, weekends and holidays. Working with Austin Water provides a number of health and welfare benefits such as low-cost medical, dental, vision, paid leave time, a highly competitive retirement plan, training opportunities and more. Please click HERE for more information. When completing the City of Austin employment application: Please be sure to detail on the application all previous employment that you wish to be considered as part of your qualifications. A detailed, complete employment application is required. It helps us to better evaluate your qualifications and will be used to determine salary if you are selected for this position. Be sure to provide job title and employment dates for all jobs you wish to be considered. Please refer to the preferred qualifications listed in this posting when completing the “Duties and Responsibilities” section for each job listed on your application, describing which preferred qualifications are applicable for that position including any preferred software used. If you are selected to interview: Your skill level in some of the competency areas for this job will be assessed through an online or in-person skills testing appointment in Austin, TX. A passing score is 50%. If you are selected as a top candidate: Verification of your education (which may include high school graduation or GED , undergraduate and/or graduate degrees) will be required. You must provide proof of education from an accredited organization/institution. And are in the military or a veteran, you will need to provide a copy of your DD-214 prior to confirming a start date. Driving Requirement: This position requires a Valid Texas Class C Driver License or the ability to acquire one by your hire date. External New Hires must meet the City of Austin’s Driver Record Evaluation ( DRE ) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. Physical Requirements: This position will require that you be able to perform the following essential job functions with confidence and with or without reasonable accommodations: Occasional carrying or lifting up to 50 lbs., occasional pushing or pulling up to 50 lbs., frequent standing and walking, occasional sitting and lying, frequent climbing of stairs and ladders, occasional reaching overhead, crawling, and twisting, frequent kneeling, stooping/bending, and repetitive hand/foot movement, far and near vision with color differentiation, hearing and communicating, frequent finger dexterity, grasping or squeezing, traveling to work sites, ability to wear personal protective equipment, exposure to extreme weather conditions, atmospheric and hazardous conditions and very loud noise. Selected candidate will be required to complete and pass a pre-employment physical exam to be considered for this position, which includes a Functional (FC) strength/agility test. Confined Space Entry and Climbing Requirements: Candidates must be able to work in environments which may have hazardous atmospheres or in confined spaces where there is limited or restricted means for entry and exit, or where the activities of an employee are hindered. Candidates must be able to perform duties with confidence at sites where climbing heights of up to 200 feet is required on ladders that support up to 300 lbs. Secondary Employment: All Austin Water employees are prohibited from accepting or engaging in any secondary employment that might conflict or interfere with an employee’s duty and responsibility to the Department. AW must review all secondary employment. Employees are required to submit a Secondary Employment Application for review and approval upon being hired with Austin Water, as well as current Austin Water employees considering Secondary Employment. All Austin Water worksite locations are tobacco-free. Use of tobacco products and/or e-cigarettes is not permitted on any AW worksite - including construction sites, parking lots, garages or in any personal vehicle located on the premises. Pay Range See Notes to Applicants Hours Monday through Friday; 6:30 a.m. to 3:00 p.m. This position will be required to work on-call shifts on a rotating basis, including nights, weekends and holidays. Overtime and call-back time will vary and are required for this position. Job Close Date 06/04/2024 Type of Posting External Department Austin Water Utility Regular/Temporary Temporary (No benefits) Grant Funded or Pooled Position Not Applicable Category Technical Location See Notes to Applicants Preferred Qualifications Preferred Experience: Associate of Applied Science degree specifically in the field of instrumentation or control systems technology, electronics, or related field. Demonstration of strong technical knowledge and experience in the maintenance and calibration of instrumentation and control systems equipment such as pressure transmitters/transducers, level sensors, flow meters, PLC’s and pump/motor control circuitry. Experience working in a water/wastewater facility or related process facility performing instrumentation & control maintenance. Duties, Functions and Responsibilities This position is posted at multiple levels. For Duties, Functions and Responsibilities, please select the appropriate job description below. Essential duties and functions, pursuant to the Americans with Disabilities Act, may include the following. Other related duties may be assigned. Instrumentation & Control Technician I Instrumentation & Control Technician II Knowledge, Skills and Abilities This position is posted at multiple levels. For Knowledge, Skills and Abilities, please select the appropriate job description below. Must possess required knowledge, skills, abilities, and experience and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed. Instrumentation & Control Technician I Instrumentation & Control Technician II Criminal Background Investigation This position does not require a Criminal Background Investigation EEO/ADA City of Austin is committed to compliance with the Americans with Disabilities Act. If you require reasonable accommodation during the application process or have a question regarding an essential job function, please call (512) 974-3210 or Texas Relay by dialing 7-1-1. The City of Austin will not discriminate against any applicant or employee based on race, creed, color, national origin, sex, gender identity, age, religion, veteran status, disability, or sexual orientation. In addition, the City will not discriminate in employment decisions on the basis of an individual’s AIDS , AIDS Related Complex, or HIV status; nor will the City discriminate against individuals who are perceived to be at risk of HIV infection, or who associate with individuals who are believed to be at risk. Information For City Employees: If you are an employee within the department, are in good standing and meet both the minimum and preferred qualifications, then you will receive an initial interview. Supplemental Questions Required fields are indicated with an asterisk (*). * The minimum qualifications for the Instrumentation & Control Technician I position are: Graduation from an accredited high school or equivalent, plus two (2) years of experience in the repair, installation, maintenance, and calibration of instrumentation and control system equipment in a water, wastewater or similar industrial process control facility OR Graduation with an Associate of Arts or Science Technology degree from an accredited college or university in a field related to instrumentation or control systems. Do you meet these minimum qualifications? Yes No * Select the item(s) that you have experience installing: Pressure Transmitters and Transducers Analyzers Level Sensors Flow Meters Pump and/Motor Control Circuitry PLC’s No Experience * Select the item(s) that you have experience calibrating: Pressure Transmitters and Transducers Analyzers Level Sensors Flow Meters Pump and/Motor Control Circuitry No Experience * Select the item(s) that you have experience repairing and maintaining: Pressure Transmitters and Transducers Analyzers Level Sensors Flow Meters Pump and/Motor Control Circuitry PLC’s No Experience * How many years of experience do you have working in a Water and Wastewater facility or a closely-related process facility performing repair, installation, maintenance, and calibration of instrumentation and control system equipment? No experience Less than 2 years At least 2 years but less than 4 years At least 4 years but less than 6 years 6 or more years * This position requires a valid Texas Class C Driver License. Do you have a valid Texas Class C Driver License or, if selected for this position, do you have the ability to acquire a valid Texas Class C Driver License by your hire date? Yes No * The City of Austin Driver Eligibility Standards require that External New Hires meet the City’s Driver Record Evaluation (DRE) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. Do you meet this requirement? Yes No * This position will require you to be able to occasionally carry, lift, push, or pull up to 50 lbs. unassisted, wear personal protective equipment, be exposed to extreme weather conditions, atmospheric and hazardous conditions and very loud noise. This position will require that you be able to perform duties with confidence descending into confined spaces and climbing heights of up to 200 feet on ladders that support up to 300 lbs. Are you able to perform these duties with or without reasonable accommodations? Yes No * Were you referred to this opportunity by an Austin Water employee? If yes, please provide the employee’s full name. (Open Ended Question) Optional & Required Documents Required Documents Resume Optional Documents
City of LIvermore
Livermore, California, United States
Description Click here for the job announcement ! The Water Resources Division provides a dynamic and supportive work environment providing critical services to the community. Come join the team at the Water Reclamation Plant - 101 West Jack London Boulevard in Livermore! There are three (3) Water Resources Instrument Control Technician vacancies to be filled. DEFINITION Under general supervision, the Water Resources Instrument Control Technician installs, operates, maintains, calibrates, and repairs computer hardware, process instrumentation, data logging, and telemetry; de-bugs, modifies, and customizes software; modifies, maintains, and repairs all components of a programmable logic controller (PLC) based supervisory control and data acquisition (SCADA) systems/distributed control systems; and performs other duties as assigned. DISTINGUISHING CHARACTERISTICS This classification is distinguished by the specialized, technical assignments in support of SCADA systems, PLC's, distributed control systems, computer networking systems, software and instrumentation, telemetry, lab analytical equipment, safety systems, and other related systems. Incumbents will be expected to work independently in modifying, maintaining, and operating the above referenced systems. SUPERVISION RECEIVED General supervision is provided by a Public Works Supervisor and the WR Coordinator - Electrical & Instrumentation Control. SUPERVISION EXERCISED None. Examples of Important and Essential Functions Technical Functions Installs, calibrates, programs, maintains, and repairs instruments, PLC based system/distributed control system components, meters, analyzers, recorders, control and feed systems, computers, monitors, printers, transducers, microprocessors, and data transmission systems; repairs electronics, electrical, pneumatic, mechanical, and hydraulic systems; maintains and repairs laboratory and safety equipment including gas detection, alarm systems, pH and DO meters; analyzes software problems; modifies computer programs to optimize plant operations and operator convenience; analyzes problems and repairs equipment to component level; analyzes problems and repairs 480 volt alternating current (AC) motor control centers; installs and configures security systems including access control and video system; performs service and maintenance work on a variety of electrical installations, systems, pumps, meters, and other equipment in City facilities; operates diagnostic instruments such as a voltmeter, megger, ammeter, ohmmeter, transistor checker, loop meter, and other electrical test equipment installs and repairs; replaces outlets, lighting fixtures, switches, ballasts, conduit runs and distribution panels; assists in planning and scheduling preventative maintenance programs; develops and implements emergency situation plans; performs all tasks in a safe manner observing all safety practices in performance of assigned duties; trains others in the operation of new or modified computer/instrumentation systems; and upgrades existing systems as needed. Administrative Functions Assists system users in solving data and systems problems and suggests alternative methods of operation; maintains accurate records and updates shop drawings, schematics, and wiring diagrams as changes are made; maintains an inventory of parts, materials, supplies, and equipment used in everyday tasks; ensures that work orders are completed in a timely manner; provides information for budget preparation; may provide direction to temporary employees; and evaluates systems performance and recommends actions to be taken. Job Related and Essential Qualifications Demonstrated Knowledge of : Methods, practices, materials, and tools of computer/instrumentation trade; the theory, terminology, operations, equipment, and principles of electronics including practices, techniques, and tools used in the installation and maintenance and repair of electrical or electronic systems; electrical, pneumatic, instrumentation, computer, PLC, SCADA systems, and distributed control systems as they apply to wastewater treatment plant systems; applicable programming languages; computer operating systems; Electrical Safety Orders of the Division of Industrial Safety, California Code, and the National Electric Code; effective communication techniques; and federal, state, county, and local regulations and safety practices. Demonstrated Skills to : Install, program, maintain, modify, and repair computer hardware, software, PLC, and SCADA/distributed control system components; install, calibrate, maintain, and repair process instrumentation, telemetry, communication systems, and other related equipment; maintain, calibrate, and repair laboratory and safety equipment, gas detecting and alarm systems; diagnose and repair motor control systems; interpret, use, and update technical manuals, blueprints, and schematics; keep accurate, up-to-date records and prepare reports; work independently with minimal supervision; maintain parts and equipment inventory; communicate clearly and concisely, both verbally and in writing; relate effectively to those contacted in the course of work; practice safe work methods when using hand tools, test equipment, and other related equipment; understand and work from oral and written instructions as well as procedural manuals; exercise initiative and creativity in performing assigned duties; and exemplify an enthusiastic, resourceful, cooperative, and effective customer service attitude with the public, co-workers, and others contacted in the course of the work. Ability to : Effectively apply the knowledge and skills necessary for this position; and learn the systems, procedures, practices, and operations of the treatment facility and have a proactive approach to continually improve all assigned areas of responsibility. Additional Information Experience, Education, and Training Guidelines Any combination of experience, education, and training that would provide the best qualified candidates. A typical way to obtain the knowledge, skills, and abilities would be: Experience : Three years of progressively responsible experience in a wastewater treatment facility or related industrial facility, including experience maintaining and operating computer and other electronic systems. Education : Vocational/technical school certificate or an Associate degree with course work in computer science, electronics, or process control/instrumentation is desirable. Training : Any recent training such as academic courses and certification programs, which are relevant to this job classification. Certification : Possession of a California Water Environment Association (CWEA) Plant Maintenance Technologist I certification is required prior to the completion of the probationary period. Possession of a CWEA Electrical/Instrumentation Technologist Grade II certification is required within 3 years of employment. License : Possession of a valid California driver's license and a satisfactory driving record as determined by the City. Requires possession of a valid California Class A license with the appropriate endorsements prior to the completion of the probationary period. Department of Transportation (D.O.T.) Requirement : Incumbents in this job classification may be called upon, at any time, to perform safety sensitive functions, and therefore, may be subject to the Federal Highway Administration D.O.T. regulations and the City's policy concerning drug and alcohol testing as a continuing condition of employment with the City of Livermore. Other Requirements : Must be willing and able to work scheduled and emergency overtime and be available on call as required; work under adverse conditions, such as in confined and awkward spaces, in the presence of noxious odors, toxic chemicals, biological agents, and sewage; work in potentially hazardous areas; work outdoors in all weather conditions; wear and use appropriate safety clothing and equipment, including self-contained breathing devices; and travel to and attend meetings, seminars, training schools, conferences, and workshops during work and non-work hours. Special Requirements : Essential duties require the mental and/or physical ability to read fine print and fine details with no color deficiencies; drive a motor vehicle; converse on the telephone and in person and be clearly understood; detect noises in electronic equipment; operate a computer keyboard and other electronic equipment necessary for this position; manipulate small parts and components; strength to safely lift and maneuver equipment and tools weighing up to 50 pounds; and bend, stretch, reach, stoop, and climb flights of stairs for prolonged periods of time and/or numerous times each day. CITY OF LIVERMORE BENEFITS SUMMARY Association of Livermore Employees Please click here for a copy of the current Memorandum of Understanding (MOU) for the Association of Livermore Employees. The information contained here is a summary of benefits. For a more detailed summary of benefits for all employee groups, click here . Any errors or omissions do not constitute either an expressed or implied contract. Updated 1/2024 MOU TERM 10/01/2021 - 09/30/2025 SCHEDULED INCREASES 10/11/2021 2.0% + $725.40/year 10/10/2022 3.5% + $754.56/year 10/09/2023 2.5% + $777.36/year 10/07/2024 2.0% + $796.80/year CAFETERIA PLAN (MEDICAL, DENTAL & VISION) $1,950/month towards medical, dental, and vision; unused balance paid in cash to employee. BASIC LIFE INSURANCE& ACCIDENTAL DEATH & DISMEMBERMENT INSURANCE (AD & D) FT - $60,000 EE coverage or PT - $30,000 EE coverage, ER paid $1,000 dependent coverage, ER paid EE option to purchase $25,000 additional life insurance& supplemental life to $500,000 (not to exceed 5x annual earnings). LONG TERM DISABILITY (LTD) ER paid 60% of base monthly earnings to $5,000/month max. (180 day waiting period) PERS New City of Livermore EEs are enrolled in the 2% at 60 formula or 2% at 62 formula, depending on eligibility, as per AB 340. Classic PERS Misc Member - 2% at 60 Member Rate = 7% EE paid Employer Rate = 34.43%ER paid (includes unfunded liability; FY23/24) 36 consecutive months Final Comp Sick Leave Credit 4th Level 59 Survivor Ben. Military Service Credit New PERS Misc Member - 2% at 62 Member Rate = 7.5% EE paid Employer Rate = 34.43%ER paid (includes unfunded liability; FY23/24) 36 consecutive months Final Comp Sick Leave Credit 4th Level 59 Survivor Ben. Military Service Credit MEDICARE (Hired after 3/31/86) EE paid 1.45% ER paid 1.45% RETIREMENT HEALTH SAVINGS (RHS) ER contribution of 4% of base pay into RHS account. VACATION ACCRUAL Years of ServiceTotal Accrual Per Year 180.6 hrs 2-5120.12 hrs 6-10135.98 hrs 11-15160.94 hrs 16-19180.18 hrs 20+192.4 hrs Prorated for part-time EE. Maximum accrual: 340 hours HOLIDAYS & HOLIDAY-IN-LIEU PAY Holidays: 12 observed holidays or in lieu day off or if work 2.5 times pay. Holiday-In-Lieu Pay: EE's assigned receive 7.5% of base salary, paid per pay period SICK LEAVE ACCRUAL 96.2 hours/year Pro-rated for part-time EE SICK LEAVE USAGE: FAMILY SICK LEAVE : For immediate Family Illness- ½ Annual Sick Leave Accrual. PARENTAL LEAVE : For non-birthing parentwho becomes a parent due to adoption, foster care placement, or birth of a child- 48 hours BEREAVEMENT/ FUNERAL LEAVE (non-immediate family) : 3 regularly scheduled workdays of sick leavecanbe used foraunt or uncle. FUNERAL LEAVE 3 regularly scheduled workdays max for immediate family. PERSONAL LEAVE Full-Time: 16 hours per year Pro-rated for part-time EE. PREGNANCY LEAVE & FMLA/CFRA EE may use accrued leaves in compliance with City Rules & Regs Benefit provided as per regulations: Federal Family and Medical Leave Act, California Family Rights Act, and California Pregnancy Disability Act DEFERRED COMPENSATION 457(b) ER contributes $75 per pay period, with required matching of $75 by EE 2024 Maximum : Normal = $23,000 Age 50+ = $7,500 Catchup Limits = $46,000 Voluntary EE Participation SECTION 125 PLAN No ER contribution 2024 Maximum Dependent Care*: Up to $5,000/year -- *See IRS Pub #503 Unreimbursed Medical: Up to $3,200/year Pre-tax Health Care Premiums FSA's for Dependent Care Unreimbursed Medical Expenses Other options offered by plan administrator UNIFORM ALLOWANCE $850 per year/ paid in equal amounts per pay period For Public Safety Dispatchers, Senior Public Safety Dispatchers, Supervising Public Safety Dispatchers, Police Clerks, Senior Police Clerk, Supervising Police Clerk, Animal Control Officers, Police Identification Technician, Supervising Property and Evidence Specialist, Property and Evidence Specialist, Community Service Specialists, Crime & Intelligence Analysts, and Crime Prevention Specialist. SAFETY SHOE ALLOWANCE Paid annually in July: $200/year for Meter Readers, and employees in Engineering Technician, Neighborhood Preservation Officer, and Building Inspector series who perform field work, and Public Works employees that are required to wear safety shoes or boots. PRESCRIPTION SAFETY GLASSES Reimbursement of up to $150/year for purchase of safety prescription glasses for EEs working in locations where there is a risk of eye injuries. SHIFT DIFFERENTIAL EEs regularly assigned to city facilities operating 24/7 - $2.50/hour for all hours worked when assigned to a shift requiring EE work at least 4 hours between 4:00 p.m.- 6:00 a.m. EQUIPMENT OPERATION Public Works EEs: $12.00/day for EE who operates Class A vehicle, min of 50%+ operation/day. STANDBY PAY 2 hours straight-time for standby on regularly scheduled work day 3 hours straight-time for standby on regularly scheduled days off and fixed City holidays CALL BACK PAY 3 hours min @ OT rate for FLSA nonexempt. First 3 hours can't be taken as comp time but paid to EE. WORK IN A HIGHER CLASS If work min of 3 consecutive workdays, paid @ 5% differential or the minimum of the salary range of the higher classification. COURT PAY/COURT CANCELLATION PAY If in connection with EE's usual official duties, 3 hrs min @ OT, or 4 hrs min @ OT for those required to appear on normal day off or on graveyard shift. SUPPORT SERVICES TRAINING OFFICER PAY $90/pay period for full pay period while assigned. BILINGUAL PAY $60/pay period for both written & conversational. Must be certified by Department Head and approved by Admin Services Director, and used on the job. $35/pay period for conversation level as certified by Department Head and approved by Admin Services Director. TELEPHONE PAY 20 minutes and for each minute exceeding 20 minutes at OT rate. CELL PHONE ALLOWANCE Standard = $40/month (if authorized) See Administrative Regulation 36 for details. COMMERCIAL DRIVERS' LICENSE PAY $35/pay period with valid CA Commercial Driver's License and valid DOT medical card. OT COMP & COMP TIME OFF OT for > 40 hrs/week or > 8 hrs/day in a reg scheduled day or hrs in excess of those normally scheduled & worked/day @ 1 ½ x reg. pay or Comp Time in lieu of OT for FLSA nonexempt. Accrued Comp Time in excess of 100 hours must be paid out. TUITION REIMBURSEMENT 75% reimbursement fortuition & books For undergraduate studies, $4,000 FY max; $16,000 lifetime max For graduate studies, $5,000 FY max; $10,000 lifetime max LICENSES & CERTIFICATIONS 100% reimbursement for required licenses and certifications EMPLOYEE ASSISTANCE PROGRAM Three (3) sessions per incident per family member. Unlimited telephonic consultations. FLSA WORK PERIOD 168 hour pay period beginning Monday at 12:01 a.m., ending 7 days later on Sunday at 12:00 midnight. If an EE is not on this work week schedule, something must be in writing documenting EE's work week. For WR Operator series : 168 hour period beginning Sunday at 12:00 midnight, ending 7 days later on Saturday at 11:59 p.m. PAY PERIODS 26 pay periods per year Benefits listed are for regular full-time employees. Benefits are prorated for 30-hour and 20-hour employees. ER = Employer EE = Employee FT = Full-Time PT = Part-Time Closing Date/Time: 5/27/2024 5:00 PM Pacific
Apr 27, 2024
Full Time
Description Click here for the job announcement ! The Water Resources Division provides a dynamic and supportive work environment providing critical services to the community. Come join the team at the Water Reclamation Plant - 101 West Jack London Boulevard in Livermore! There are three (3) Water Resources Instrument Control Technician vacancies to be filled. DEFINITION Under general supervision, the Water Resources Instrument Control Technician installs, operates, maintains, calibrates, and repairs computer hardware, process instrumentation, data logging, and telemetry; de-bugs, modifies, and customizes software; modifies, maintains, and repairs all components of a programmable logic controller (PLC) based supervisory control and data acquisition (SCADA) systems/distributed control systems; and performs other duties as assigned. DISTINGUISHING CHARACTERISTICS This classification is distinguished by the specialized, technical assignments in support of SCADA systems, PLC's, distributed control systems, computer networking systems, software and instrumentation, telemetry, lab analytical equipment, safety systems, and other related systems. Incumbents will be expected to work independently in modifying, maintaining, and operating the above referenced systems. SUPERVISION RECEIVED General supervision is provided by a Public Works Supervisor and the WR Coordinator - Electrical & Instrumentation Control. SUPERVISION EXERCISED None. Examples of Important and Essential Functions Technical Functions Installs, calibrates, programs, maintains, and repairs instruments, PLC based system/distributed control system components, meters, analyzers, recorders, control and feed systems, computers, monitors, printers, transducers, microprocessors, and data transmission systems; repairs electronics, electrical, pneumatic, mechanical, and hydraulic systems; maintains and repairs laboratory and safety equipment including gas detection, alarm systems, pH and DO meters; analyzes software problems; modifies computer programs to optimize plant operations and operator convenience; analyzes problems and repairs equipment to component level; analyzes problems and repairs 480 volt alternating current (AC) motor control centers; installs and configures security systems including access control and video system; performs service and maintenance work on a variety of electrical installations, systems, pumps, meters, and other equipment in City facilities; operates diagnostic instruments such as a voltmeter, megger, ammeter, ohmmeter, transistor checker, loop meter, and other electrical test equipment installs and repairs; replaces outlets, lighting fixtures, switches, ballasts, conduit runs and distribution panels; assists in planning and scheduling preventative maintenance programs; develops and implements emergency situation plans; performs all tasks in a safe manner observing all safety practices in performance of assigned duties; trains others in the operation of new or modified computer/instrumentation systems; and upgrades existing systems as needed. Administrative Functions Assists system users in solving data and systems problems and suggests alternative methods of operation; maintains accurate records and updates shop drawings, schematics, and wiring diagrams as changes are made; maintains an inventory of parts, materials, supplies, and equipment used in everyday tasks; ensures that work orders are completed in a timely manner; provides information for budget preparation; may provide direction to temporary employees; and evaluates systems performance and recommends actions to be taken. Job Related and Essential Qualifications Demonstrated Knowledge of : Methods, practices, materials, and tools of computer/instrumentation trade; the theory, terminology, operations, equipment, and principles of electronics including practices, techniques, and tools used in the installation and maintenance and repair of electrical or electronic systems; electrical, pneumatic, instrumentation, computer, PLC, SCADA systems, and distributed control systems as they apply to wastewater treatment plant systems; applicable programming languages; computer operating systems; Electrical Safety Orders of the Division of Industrial Safety, California Code, and the National Electric Code; effective communication techniques; and federal, state, county, and local regulations and safety practices. Demonstrated Skills to : Install, program, maintain, modify, and repair computer hardware, software, PLC, and SCADA/distributed control system components; install, calibrate, maintain, and repair process instrumentation, telemetry, communication systems, and other related equipment; maintain, calibrate, and repair laboratory and safety equipment, gas detecting and alarm systems; diagnose and repair motor control systems; interpret, use, and update technical manuals, blueprints, and schematics; keep accurate, up-to-date records and prepare reports; work independently with minimal supervision; maintain parts and equipment inventory; communicate clearly and concisely, both verbally and in writing; relate effectively to those contacted in the course of work; practice safe work methods when using hand tools, test equipment, and other related equipment; understand and work from oral and written instructions as well as procedural manuals; exercise initiative and creativity in performing assigned duties; and exemplify an enthusiastic, resourceful, cooperative, and effective customer service attitude with the public, co-workers, and others contacted in the course of the work. Ability to : Effectively apply the knowledge and skills necessary for this position; and learn the systems, procedures, practices, and operations of the treatment facility and have a proactive approach to continually improve all assigned areas of responsibility. Additional Information Experience, Education, and Training Guidelines Any combination of experience, education, and training that would provide the best qualified candidates. A typical way to obtain the knowledge, skills, and abilities would be: Experience : Three years of progressively responsible experience in a wastewater treatment facility or related industrial facility, including experience maintaining and operating computer and other electronic systems. Education : Vocational/technical school certificate or an Associate degree with course work in computer science, electronics, or process control/instrumentation is desirable. Training : Any recent training such as academic courses and certification programs, which are relevant to this job classification. Certification : Possession of a California Water Environment Association (CWEA) Plant Maintenance Technologist I certification is required prior to the completion of the probationary period. Possession of a CWEA Electrical/Instrumentation Technologist Grade II certification is required within 3 years of employment. License : Possession of a valid California driver's license and a satisfactory driving record as determined by the City. Requires possession of a valid California Class A license with the appropriate endorsements prior to the completion of the probationary period. Department of Transportation (D.O.T.) Requirement : Incumbents in this job classification may be called upon, at any time, to perform safety sensitive functions, and therefore, may be subject to the Federal Highway Administration D.O.T. regulations and the City's policy concerning drug and alcohol testing as a continuing condition of employment with the City of Livermore. Other Requirements : Must be willing and able to work scheduled and emergency overtime and be available on call as required; work under adverse conditions, such as in confined and awkward spaces, in the presence of noxious odors, toxic chemicals, biological agents, and sewage; work in potentially hazardous areas; work outdoors in all weather conditions; wear and use appropriate safety clothing and equipment, including self-contained breathing devices; and travel to and attend meetings, seminars, training schools, conferences, and workshops during work and non-work hours. Special Requirements : Essential duties require the mental and/or physical ability to read fine print and fine details with no color deficiencies; drive a motor vehicle; converse on the telephone and in person and be clearly understood; detect noises in electronic equipment; operate a computer keyboard and other electronic equipment necessary for this position; manipulate small parts and components; strength to safely lift and maneuver equipment and tools weighing up to 50 pounds; and bend, stretch, reach, stoop, and climb flights of stairs for prolonged periods of time and/or numerous times each day. CITY OF LIVERMORE BENEFITS SUMMARY Association of Livermore Employees Please click here for a copy of the current Memorandum of Understanding (MOU) for the Association of Livermore Employees. The information contained here is a summary of benefits. For a more detailed summary of benefits for all employee groups, click here . Any errors or omissions do not constitute either an expressed or implied contract. Updated 1/2024 MOU TERM 10/01/2021 - 09/30/2025 SCHEDULED INCREASES 10/11/2021 2.0% + $725.40/year 10/10/2022 3.5% + $754.56/year 10/09/2023 2.5% + $777.36/year 10/07/2024 2.0% + $796.80/year CAFETERIA PLAN (MEDICAL, DENTAL & VISION) $1,950/month towards medical, dental, and vision; unused balance paid in cash to employee. BASIC LIFE INSURANCE& ACCIDENTAL DEATH & DISMEMBERMENT INSURANCE (AD & D) FT - $60,000 EE coverage or PT - $30,000 EE coverage, ER paid $1,000 dependent coverage, ER paid EE option to purchase $25,000 additional life insurance& supplemental life to $500,000 (not to exceed 5x annual earnings). LONG TERM DISABILITY (LTD) ER paid 60% of base monthly earnings to $5,000/month max. (180 day waiting period) PERS New City of Livermore EEs are enrolled in the 2% at 60 formula or 2% at 62 formula, depending on eligibility, as per AB 340. Classic PERS Misc Member - 2% at 60 Member Rate = 7% EE paid Employer Rate = 34.43%ER paid (includes unfunded liability; FY23/24) 36 consecutive months Final Comp Sick Leave Credit 4th Level 59 Survivor Ben. Military Service Credit New PERS Misc Member - 2% at 62 Member Rate = 7.5% EE paid Employer Rate = 34.43%ER paid (includes unfunded liability; FY23/24) 36 consecutive months Final Comp Sick Leave Credit 4th Level 59 Survivor Ben. Military Service Credit MEDICARE (Hired after 3/31/86) EE paid 1.45% ER paid 1.45% RETIREMENT HEALTH SAVINGS (RHS) ER contribution of 4% of base pay into RHS account. VACATION ACCRUAL Years of ServiceTotal Accrual Per Year 180.6 hrs 2-5120.12 hrs 6-10135.98 hrs 11-15160.94 hrs 16-19180.18 hrs 20+192.4 hrs Prorated for part-time EE. Maximum accrual: 340 hours HOLIDAYS & HOLIDAY-IN-LIEU PAY Holidays: 12 observed holidays or in lieu day off or if work 2.5 times pay. Holiday-In-Lieu Pay: EE's assigned receive 7.5% of base salary, paid per pay period SICK LEAVE ACCRUAL 96.2 hours/year Pro-rated for part-time EE SICK LEAVE USAGE: FAMILY SICK LEAVE : For immediate Family Illness- ½ Annual Sick Leave Accrual. PARENTAL LEAVE : For non-birthing parentwho becomes a parent due to adoption, foster care placement, or birth of a child- 48 hours BEREAVEMENT/ FUNERAL LEAVE (non-immediate family) : 3 regularly scheduled workdays of sick leavecanbe used foraunt or uncle. FUNERAL LEAVE 3 regularly scheduled workdays max for immediate family. PERSONAL LEAVE Full-Time: 16 hours per year Pro-rated for part-time EE. PREGNANCY LEAVE & FMLA/CFRA EE may use accrued leaves in compliance with City Rules & Regs Benefit provided as per regulations: Federal Family and Medical Leave Act, California Family Rights Act, and California Pregnancy Disability Act DEFERRED COMPENSATION 457(b) ER contributes $75 per pay period, with required matching of $75 by EE 2024 Maximum : Normal = $23,000 Age 50+ = $7,500 Catchup Limits = $46,000 Voluntary EE Participation SECTION 125 PLAN No ER contribution 2024 Maximum Dependent Care*: Up to $5,000/year -- *See IRS Pub #503 Unreimbursed Medical: Up to $3,200/year Pre-tax Health Care Premiums FSA's for Dependent Care Unreimbursed Medical Expenses Other options offered by plan administrator UNIFORM ALLOWANCE $850 per year/ paid in equal amounts per pay period For Public Safety Dispatchers, Senior Public Safety Dispatchers, Supervising Public Safety Dispatchers, Police Clerks, Senior Police Clerk, Supervising Police Clerk, Animal Control Officers, Police Identification Technician, Supervising Property and Evidence Specialist, Property and Evidence Specialist, Community Service Specialists, Crime & Intelligence Analysts, and Crime Prevention Specialist. SAFETY SHOE ALLOWANCE Paid annually in July: $200/year for Meter Readers, and employees in Engineering Technician, Neighborhood Preservation Officer, and Building Inspector series who perform field work, and Public Works employees that are required to wear safety shoes or boots. PRESCRIPTION SAFETY GLASSES Reimbursement of up to $150/year for purchase of safety prescription glasses for EEs working in locations where there is a risk of eye injuries. SHIFT DIFFERENTIAL EEs regularly assigned to city facilities operating 24/7 - $2.50/hour for all hours worked when assigned to a shift requiring EE work at least 4 hours between 4:00 p.m.- 6:00 a.m. EQUIPMENT OPERATION Public Works EEs: $12.00/day for EE who operates Class A vehicle, min of 50%+ operation/day. STANDBY PAY 2 hours straight-time for standby on regularly scheduled work day 3 hours straight-time for standby on regularly scheduled days off and fixed City holidays CALL BACK PAY 3 hours min @ OT rate for FLSA nonexempt. First 3 hours can't be taken as comp time but paid to EE. WORK IN A HIGHER CLASS If work min of 3 consecutive workdays, paid @ 5% differential or the minimum of the salary range of the higher classification. COURT PAY/COURT CANCELLATION PAY If in connection with EE's usual official duties, 3 hrs min @ OT, or 4 hrs min @ OT for those required to appear on normal day off or on graveyard shift. SUPPORT SERVICES TRAINING OFFICER PAY $90/pay period for full pay period while assigned. BILINGUAL PAY $60/pay period for both written & conversational. Must be certified by Department Head and approved by Admin Services Director, and used on the job. $35/pay period for conversation level as certified by Department Head and approved by Admin Services Director. TELEPHONE PAY 20 minutes and for each minute exceeding 20 minutes at OT rate. CELL PHONE ALLOWANCE Standard = $40/month (if authorized) See Administrative Regulation 36 for details. COMMERCIAL DRIVERS' LICENSE PAY $35/pay period with valid CA Commercial Driver's License and valid DOT medical card. OT COMP & COMP TIME OFF OT for > 40 hrs/week or > 8 hrs/day in a reg scheduled day or hrs in excess of those normally scheduled & worked/day @ 1 ½ x reg. pay or Comp Time in lieu of OT for FLSA nonexempt. Accrued Comp Time in excess of 100 hours must be paid out. TUITION REIMBURSEMENT 75% reimbursement fortuition & books For undergraduate studies, $4,000 FY max; $16,000 lifetime max For graduate studies, $5,000 FY max; $10,000 lifetime max LICENSES & CERTIFICATIONS 100% reimbursement for required licenses and certifications EMPLOYEE ASSISTANCE PROGRAM Three (3) sessions per incident per family member. Unlimited telephonic consultations. FLSA WORK PERIOD 168 hour pay period beginning Monday at 12:01 a.m., ending 7 days later on Sunday at 12:00 midnight. If an EE is not on this work week schedule, something must be in writing documenting EE's work week. For WR Operator series : 168 hour period beginning Sunday at 12:00 midnight, ending 7 days later on Saturday at 11:59 p.m. PAY PERIODS 26 pay periods per year Benefits listed are for regular full-time employees. Benefits are prorated for 30-hour and 20-hour employees. ER = Employer EE = Employee FT = Full-Time PT = Part-Time Closing Date/Time: 5/27/2024 5:00 PM Pacific
Metropolitan Water District of Southern California
Los Angeles, California, United States
The Water Quality Technician II position will support the Grace F. Napolitano Pure Water Southern California Innovation Center Demonstration Facility located at the A. K. Warren Water Resource Facility in Carson, CA. This position will report out of Headquarters adjacent to Union Station in Los Angeles, California and requires skills in instrumentation and control, electrical, and electronic/communication equipment to support facility operations and testing. In this position you will assist with preventative and corrective maintenance, regularly monitor, inspect, test, calibrate and record readings for a variety of instruments and electrical systems to ensure reliable equipment life and service expectations of on meters/switches and sensors (e.g. for flow, level, pressure), motors, compressors, valves, pumps, chemical storage and feed systems, geared drive equipment, piping systems and related equipment. As the Water Quality Technician II, you will assist with the installation, testing, maintenance and troubleshooting of equipment, instrumentation, control systems, and automation systems, including necessary Supervisory Control and Data Acquisition components, programmable logic controllers, and communication networks (including MODBUS, Profibus, and 4-20mA) to support applied research platforms. You will also assist with emergency response to ensure continuous operation of water quality demonstration and pilot plants, including on-call support during off-work hours. Schedule: 5/8, Monday through Friday 6:30 am to 3:00 pm This job announcement has been designed to indicate the general nature and level of work being performed by employees in this classification / job. To view the full job description click here: Water Quality Technician II EMPLOYMENT STANDARDS MINIMUM QUALIFICATIONS Education and Experience: High school diploma or certificate of high school equivalency and four years of relevant experience; or two years experience as a MWD Water Quality Technician I. Relevant Experience is defined as: maintenance of water quality or process instrumentation used in wastewater, water, or advanced water treatment facilities. CERTIFICATIONS, LICENSES, AND REGISTRATION REQUIREMENTS License(s): Valid California Class C Driver’s License or equivalent (required at time of application) that allows you to drive during your employment. CLOSING Benefits: • Competitive compensation • Excellent medical, dental, life, vision plans. • Deferred compensation in the form of a 401(k) plan (with matching contribution) and a 457 plan. • Retirement benefits under the California Public Employees' Retirement System • Tuition reimbursement • Training and advancement opportunities • Excellent working environment For more information on MWD benefits, please use the following link: Benefits Regular FT PT Employees (Represented) ABOUT MWD The Metropolitan Water District of Southern California is a state-established cooperative that, along with its 26 cities and retail suppliers, provides water for 19 million people in six counties. The district imports water from the Colorado River and Northern California to supplement local supplies, and helps its members to develop increased water conservation, recycling, storage and other resource-management programs. The Metropolitan Water District of Southern California is committed to providing reasonable accommodations to qualified individuals with disabilities. Qualified individuals with disabilities, who need a reasonable accommodation during the application or selection process, please call (213) 217-7738 or email: jobs@mwdh2o.com Metropolitan is a Federal and State EO employer - Veterans/Disabled and other protected categories. Application Filing Period: Closes at 4:30 pm PST on the date stated in the job announcement. However it may close prior to the filing end date if sufficient applications have been received. If sufficient applications have not been received, then the filing period end date may be extended. Sponsorship: Applicants for employment with The Metropolitan Water District of Southern California must have work authorization that does not now or in the future require sponsorship of a visa for employment authorization in the United States (i.e., H1-B or other employment-based immigration case). Closing Date/Time: May 31, 2024 @ 4:30PM (PST)
May 07, 2024
Full Time
The Water Quality Technician II position will support the Grace F. Napolitano Pure Water Southern California Innovation Center Demonstration Facility located at the A. K. Warren Water Resource Facility in Carson, CA. This position will report out of Headquarters adjacent to Union Station in Los Angeles, California and requires skills in instrumentation and control, electrical, and electronic/communication equipment to support facility operations and testing. In this position you will assist with preventative and corrective maintenance, regularly monitor, inspect, test, calibrate and record readings for a variety of instruments and electrical systems to ensure reliable equipment life and service expectations of on meters/switches and sensors (e.g. for flow, level, pressure), motors, compressors, valves, pumps, chemical storage and feed systems, geared drive equipment, piping systems and related equipment. As the Water Quality Technician II, you will assist with the installation, testing, maintenance and troubleshooting of equipment, instrumentation, control systems, and automation systems, including necessary Supervisory Control and Data Acquisition components, programmable logic controllers, and communication networks (including MODBUS, Profibus, and 4-20mA) to support applied research platforms. You will also assist with emergency response to ensure continuous operation of water quality demonstration and pilot plants, including on-call support during off-work hours. Schedule: 5/8, Monday through Friday 6:30 am to 3:00 pm This job announcement has been designed to indicate the general nature and level of work being performed by employees in this classification / job. To view the full job description click here: Water Quality Technician II EMPLOYMENT STANDARDS MINIMUM QUALIFICATIONS Education and Experience: High school diploma or certificate of high school equivalency and four years of relevant experience; or two years experience as a MWD Water Quality Technician I. Relevant Experience is defined as: maintenance of water quality or process instrumentation used in wastewater, water, or advanced water treatment facilities. CERTIFICATIONS, LICENSES, AND REGISTRATION REQUIREMENTS License(s): Valid California Class C Driver’s License or equivalent (required at time of application) that allows you to drive during your employment. CLOSING Benefits: • Competitive compensation • Excellent medical, dental, life, vision plans. • Deferred compensation in the form of a 401(k) plan (with matching contribution) and a 457 plan. • Retirement benefits under the California Public Employees' Retirement System • Tuition reimbursement • Training and advancement opportunities • Excellent working environment For more information on MWD benefits, please use the following link: Benefits Regular FT PT Employees (Represented) ABOUT MWD The Metropolitan Water District of Southern California is a state-established cooperative that, along with its 26 cities and retail suppliers, provides water for 19 million people in six counties. The district imports water from the Colorado River and Northern California to supplement local supplies, and helps its members to develop increased water conservation, recycling, storage and other resource-management programs. The Metropolitan Water District of Southern California is committed to providing reasonable accommodations to qualified individuals with disabilities. Qualified individuals with disabilities, who need a reasonable accommodation during the application or selection process, please call (213) 217-7738 or email: jobs@mwdh2o.com Metropolitan is a Federal and State EO employer - Veterans/Disabled and other protected categories. Application Filing Period: Closes at 4:30 pm PST on the date stated in the job announcement. However it may close prior to the filing end date if sufficient applications have been received. If sufficient applications have not been received, then the filing period end date may be extended. Sponsorship: Applicants for employment with The Metropolitan Water District of Southern California must have work authorization that does not now or in the future require sponsorship of a visa for employment authorization in the United States (i.e., H1-B or other employment-based immigration case). Closing Date/Time: May 31, 2024 @ 4:30PM (PST)
City of Sacramento, CA
Sacramento, California, United States
THE POSITION Performs calibrations on a range of instruments including level transmitters, pressure transmitters, turbidimeters, particle counters, pressure switches, chlorine analyzers, pH analyzers, and fluoride analyzers. This job classification is also involved in researching new instruments and their installation into our system. This job classification calibrates and installs instrumentation on both the Water and Wastewater areas. IDEAL CANDIDATE STATEMENT The ideal candidate will have formal training related to electronics, electrical theory, or process instrumentation. A minimum of four year’s work experience installing, servicing, and repairing of electronic and pneumatic instruments, and instrument systems such as chemical analyzers, pressure sensors, telemetry, computer-based process control instruments, data logging devices, and remote telemetry-controlled equipment in an industrial application, preferably in water treatment and conveyance, is highly desired. To perform technical duties in the installation, servicing, and repair of electronic and pneumatic instruments and instrument systems such as chemical analyzers, pressure sensors, telemeters, and computer-based process control and data logging and remote control equipment. DISTINGUISHING CHARACTERISTICS Instrument Technician I This is the journey level. Positions in this class are flexibly staffed and are filled by advancement from the Junior level, or when filled from the outside, require prior experience installing, servicing, and repairing electronic and pneumatic instruments and instrument systems. Appointment to I level requires that the employee is performing the full range of difficult and skilled work. Incumbents are not, however, expected to perform as knowledgeably as and at the skill level of Instrument Technicians II. Instrument Technician II This is the advanced journey level. Positions in this class are flexibly staffed and are normally filled by advancement from the lower class of Instrument Technician I, or if filled from the outside, employees would be required to have extensive experience installing, servicing, and repairing electronic and pneumatic instruments and instrument systems, and to have completed all appropriate training courses. SUPERVISION RECEIVED AND EXERCISED An Electrician Supervisor provides general direction to II-level Technicians, and direction to I-level Technicians. Technical supervision may be provided by II-level Technicians to other Technician staff. ESSENTIAL DUTIES AND RESPONSIBILITIES Depending upon assignment, duties may include, but are not limited to, the following: - Conduct preventive maintenance, calibration and testing program to carry out a continuous program of instrument inspection and maintenance in an effort to preclude equipment failure and related process control problems. - Repair, correct, and adjust equipment which does not meet predetermined standards of operating efficiency. - Review work orders, blueprints, shop drawings, and maintenance schedules with supervisory personnel as necessary as related to specific maintenance and repair projects. - Plan tool and work sequences necessary for maintenance activities and coordinate plans with assigned personnel to assure mutual understanding about goals and methods. - Assist in design and construction of new equipment or modification of existing electronic systems. - Maintain inventory of tools, records, parts, and other material necessary for preventive maintenance of equipment. - Provide instruction to operations and maintenance personnel to assure better understanding of equipment. - Work may occasionally be performed in hazardous areas, including but not limited to, sewage sumps, elevated tanks, and high voltage equipment. - Perform related work as required. QUALIFICATIONS Instrument Technician I Knowledge of: - The practices, methods, tools, materials, and equipment used in the maintenance and repair of electronic equipment. - Electrical circuits and wiring systems including the advanced principles of electrical and electronic theory. - The theory, principles, and applications of solid state circuitry as used in computers and programmable controllers. - Occupational hazards and standard safety precautions necessary in the work. Ability to: - Occasionally lift heavy objects as required. - Analyze problems, and initiate corrective procedures. - Plan, organize, and coordinate the work of others. - Keep records and prepare necessary reports as required. - Establish and maintain effective working relationships with employees and the general public. - Work with independence to make decisions relative to work methods and tools. - Understand and interpret written and oral instructions, including blueprints and wiring diagrams. Experience and Education: Any combination equivalent to experience and education that could likely provide the required knowledge and abilities would be qualifying. A typical way to obtain the knowledge and abilities would be: Experience: One year of experience comparable to that of an Instrument Technician Trainee in the City of Sacramento, or three years of experience in the operation, maintenance, and repair of industrial instrumentation, control, and communication system components involving the application of physical, chemical, and electronics principles. Education: One year of full-time college-level coursework in instrumentation, physical science, and electronics, or equivalent training in a recognized trade or technical school may be substituted for one year of the required experience. Instrument Technician II In addition to the qualifications for Instrument Technician I: Knowledge of: - Components and parts of the most complicated, state of the art instruments and equipment used in electronic and pneumatic instruments and instrument systems work. - Principles of technical supervision. Ability to: - Work with virtually total independence. - Install, service, and repair the most complicated, state of the art instruments and equipment used in electronic and pneumatic instruments and instrument systems work. - Supervise the technical functions of lower level instrument technician staff. Experience and Education: Any combination equivalent to experience and education that could likely provide the required knowledge and abilities would be qualifying. A typical way to obtain the knowledge and abilities would be: Experience: Two years of experience comparable to that of an Instrument Technician I in the City of Sacramento, or five years of experience installing, servicing, and repairing electronic and pneumatic instruments and instrument systems. Education: Completion of all appropriate training programs in the most complicated electronic and pneumatic instruments and instrument systems. PROOF OF EDUCATION Should education be used to qualify for this position, then proof of education such as, but not limited to, university/college transcripts and degrees should be submitted with your application and will be required at the time of appointment . Unofficial documents and/or copies are acceptable. An applicant with a college degree obtained outside the United States must have education records evaluated by a credentials evaluation service. Evaluation of education records will be due at time of appointment. SPECIAL QUALIFICATIONS Driver License: Possession of a valid California Class III Driver License at the time of appointment. Loss of the Class III License is cause for discipline. Individuals who do not meet this requirement due to physical disability will be reviewed on a case-by-case basis. Residency Requirement: Employees in these classifications must reside within thirty-five (35) air miles from the freeway interchange at W-X Streets, 29th - 30th Streets within one year following appointment PROBATIONARY PERIOD: Employees must complete twelve (12) months of probation at a satisfactory performance level prior to gaining permanent status. THE SELECTION PROCEDURE P lease note, the City of Sacramento's preferred method of communication with applicants is via e-mail. As such, please ensure you verify the e-mail address on your application, and check your e-mail frequently, including your spam and junk folders. All e-mail notifications can also be accessed through the governmentjobs.com applicant inbox. 1. Application: (Pass/Fail) - All applicants must complete and submit online a City of Sacramento employment application by the final filing deadline ; Employment applications must be submitted online; paper applications will not be accepted. Employment applications will be considered incomplete and will be disqualified: If applicants do not list current and/or past job-related experience in the duties area of the "Work Experience" section. Note: Qualifying experience is based on full-time experience (40 hours per week). Qualifying experience is calculated to the full-time equivalent (pro-rated if less than 40 hours/week). If "see resume" is noted in the "Work Experience" section; a resume will not substitute for the information required in the "Work Experience" section. Proof of education such as, but not limited to, university/college transcripts and degrees should be submitted online with your application. Proof of education will be required at time of appointment. Position/job titles will not be considered in determining eligibility for meeting the minimum qualifications for this position. If you’re requesting Veteran’s credit, a copy of your DD214 must be submitted online with your application or emailed to the Employment Office by the final filing deadline. Information regarding the use of Veteran’s credit can be found in the Civil Service Board rules under rule 4.9C. Applicants are responsible for attaching a copy of their DD214 to each position for which they apply. 2. Training and Experience Exam : (Weighted 100%) - The questions located at the end of the application are the Training and Experience (T&E) Exam. Responses to the T&E questions will be rated and scored. This exam will evaluate the relevance, level, and progression of a candidate's education, training and experience. The exam score will determine your ranking on the eligible list for this job. When completing the T&E questions, please note: Responses to the T&E questions must be submitted online; paper questionnaires will not be accepted. A resume will not substitute for the information required in the T&E questions. 3. Eligibility : Candidates who pass the Training and Experience Test will be placed on the eligible list. The hiring department may contact candidates for interview at any time during the life of the one-year list. Candidate’s eligibility expires one year from the date of notification of a passing score for the Instrument Technician II examination. 4. Screening Committee : (Pass/Fail)- All candidates that pass the examination and are in one of the top three ranks will have their application forwarded to the hiring department for review. The hiring department will select the most competitive applications for further consideration. Human Resources will only evaluate employment applications for the minimum qualifications, as stated on the job announcement, for applications selected by the hiring department. 5. Conditional Hire: Upon receipt of a conditional offer, the selected candidate must complete and pass Live Scan/fingerprinting. If applicable, candidates may also need to pass a pre-employment medical exam, controlled substance and/or alcohol test, and possess any required licensure or certification prior to receiving a start date from the Department. Failure to meet these prerequisites will be grounds for withdrawal of your conditional offer of employment. QUESTIONS: For questions concerning this job announcement and the application process: Please visit https://www.governmentjobs.com/Home/ApplicationGuide for a comprehensive, step-by-step guide to the application process. For technical support between 6 AM - 5 PM PT, contact Live Applicant Support at (855) 524-5627. Visit the City of Sacramento Human Resources Department website at https://www.cityofsacramento.gov/HR/employment ; Send an email to employment@cityofsacramento.org ; or Call the Human Resources Department at (916) 808-5726 Bilingual Pay Did you know that the City offers bilingual pay? That's right, most labor agreements offer the option of providing employees with bilingual pay if the department deems it to be operationally necessary. Pension Reform Act The City of Sacramento is covered by the California Public Employees' Retirement System, and as such, must adhere to the California Public Employee's Pension Reform Act (PEPRA) of 2013. Please note that the provisions within this act may affect or impact an applicant's eligibility and/or selection for open vacancies at the City of Sacramento. Equal Opportunity Employer The City of Sacramento is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. Additional Information Civil Service Rules: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/CivilServiceBoardRules62012.pdf Union Contracts: https://www.cityofsacramento.gov/HR/labor-agreements.html Salary Schedule: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/SalarySchedule.pdf Closing Date/Time: 6/12/2024 11:59 PM Pacific
May 16, 2024
Full Time
THE POSITION Performs calibrations on a range of instruments including level transmitters, pressure transmitters, turbidimeters, particle counters, pressure switches, chlorine analyzers, pH analyzers, and fluoride analyzers. This job classification is also involved in researching new instruments and their installation into our system. This job classification calibrates and installs instrumentation on both the Water and Wastewater areas. IDEAL CANDIDATE STATEMENT The ideal candidate will have formal training related to electronics, electrical theory, or process instrumentation. A minimum of four year’s work experience installing, servicing, and repairing of electronic and pneumatic instruments, and instrument systems such as chemical analyzers, pressure sensors, telemetry, computer-based process control instruments, data logging devices, and remote telemetry-controlled equipment in an industrial application, preferably in water treatment and conveyance, is highly desired. To perform technical duties in the installation, servicing, and repair of electronic and pneumatic instruments and instrument systems such as chemical analyzers, pressure sensors, telemeters, and computer-based process control and data logging and remote control equipment. DISTINGUISHING CHARACTERISTICS Instrument Technician I This is the journey level. Positions in this class are flexibly staffed and are filled by advancement from the Junior level, or when filled from the outside, require prior experience installing, servicing, and repairing electronic and pneumatic instruments and instrument systems. Appointment to I level requires that the employee is performing the full range of difficult and skilled work. Incumbents are not, however, expected to perform as knowledgeably as and at the skill level of Instrument Technicians II. Instrument Technician II This is the advanced journey level. Positions in this class are flexibly staffed and are normally filled by advancement from the lower class of Instrument Technician I, or if filled from the outside, employees would be required to have extensive experience installing, servicing, and repairing electronic and pneumatic instruments and instrument systems, and to have completed all appropriate training courses. SUPERVISION RECEIVED AND EXERCISED An Electrician Supervisor provides general direction to II-level Technicians, and direction to I-level Technicians. Technical supervision may be provided by II-level Technicians to other Technician staff. ESSENTIAL DUTIES AND RESPONSIBILITIES Depending upon assignment, duties may include, but are not limited to, the following: - Conduct preventive maintenance, calibration and testing program to carry out a continuous program of instrument inspection and maintenance in an effort to preclude equipment failure and related process control problems. - Repair, correct, and adjust equipment which does not meet predetermined standards of operating efficiency. - Review work orders, blueprints, shop drawings, and maintenance schedules with supervisory personnel as necessary as related to specific maintenance and repair projects. - Plan tool and work sequences necessary for maintenance activities and coordinate plans with assigned personnel to assure mutual understanding about goals and methods. - Assist in design and construction of new equipment or modification of existing electronic systems. - Maintain inventory of tools, records, parts, and other material necessary for preventive maintenance of equipment. - Provide instruction to operations and maintenance personnel to assure better understanding of equipment. - Work may occasionally be performed in hazardous areas, including but not limited to, sewage sumps, elevated tanks, and high voltage equipment. - Perform related work as required. QUALIFICATIONS Instrument Technician I Knowledge of: - The practices, methods, tools, materials, and equipment used in the maintenance and repair of electronic equipment. - Electrical circuits and wiring systems including the advanced principles of electrical and electronic theory. - The theory, principles, and applications of solid state circuitry as used in computers and programmable controllers. - Occupational hazards and standard safety precautions necessary in the work. Ability to: - Occasionally lift heavy objects as required. - Analyze problems, and initiate corrective procedures. - Plan, organize, and coordinate the work of others. - Keep records and prepare necessary reports as required. - Establish and maintain effective working relationships with employees and the general public. - Work with independence to make decisions relative to work methods and tools. - Understand and interpret written and oral instructions, including blueprints and wiring diagrams. Experience and Education: Any combination equivalent to experience and education that could likely provide the required knowledge and abilities would be qualifying. A typical way to obtain the knowledge and abilities would be: Experience: One year of experience comparable to that of an Instrument Technician Trainee in the City of Sacramento, or three years of experience in the operation, maintenance, and repair of industrial instrumentation, control, and communication system components involving the application of physical, chemical, and electronics principles. Education: One year of full-time college-level coursework in instrumentation, physical science, and electronics, or equivalent training in a recognized trade or technical school may be substituted for one year of the required experience. Instrument Technician II In addition to the qualifications for Instrument Technician I: Knowledge of: - Components and parts of the most complicated, state of the art instruments and equipment used in electronic and pneumatic instruments and instrument systems work. - Principles of technical supervision. Ability to: - Work with virtually total independence. - Install, service, and repair the most complicated, state of the art instruments and equipment used in electronic and pneumatic instruments and instrument systems work. - Supervise the technical functions of lower level instrument technician staff. Experience and Education: Any combination equivalent to experience and education that could likely provide the required knowledge and abilities would be qualifying. A typical way to obtain the knowledge and abilities would be: Experience: Two years of experience comparable to that of an Instrument Technician I in the City of Sacramento, or five years of experience installing, servicing, and repairing electronic and pneumatic instruments and instrument systems. Education: Completion of all appropriate training programs in the most complicated electronic and pneumatic instruments and instrument systems. PROOF OF EDUCATION Should education be used to qualify for this position, then proof of education such as, but not limited to, university/college transcripts and degrees should be submitted with your application and will be required at the time of appointment . Unofficial documents and/or copies are acceptable. An applicant with a college degree obtained outside the United States must have education records evaluated by a credentials evaluation service. Evaluation of education records will be due at time of appointment. SPECIAL QUALIFICATIONS Driver License: Possession of a valid California Class III Driver License at the time of appointment. Loss of the Class III License is cause for discipline. Individuals who do not meet this requirement due to physical disability will be reviewed on a case-by-case basis. Residency Requirement: Employees in these classifications must reside within thirty-five (35) air miles from the freeway interchange at W-X Streets, 29th - 30th Streets within one year following appointment PROBATIONARY PERIOD: Employees must complete twelve (12) months of probation at a satisfactory performance level prior to gaining permanent status. THE SELECTION PROCEDURE P lease note, the City of Sacramento's preferred method of communication with applicants is via e-mail. As such, please ensure you verify the e-mail address on your application, and check your e-mail frequently, including your spam and junk folders. All e-mail notifications can also be accessed through the governmentjobs.com applicant inbox. 1. Application: (Pass/Fail) - All applicants must complete and submit online a City of Sacramento employment application by the final filing deadline ; Employment applications must be submitted online; paper applications will not be accepted. Employment applications will be considered incomplete and will be disqualified: If applicants do not list current and/or past job-related experience in the duties area of the "Work Experience" section. Note: Qualifying experience is based on full-time experience (40 hours per week). Qualifying experience is calculated to the full-time equivalent (pro-rated if less than 40 hours/week). If "see resume" is noted in the "Work Experience" section; a resume will not substitute for the information required in the "Work Experience" section. Proof of education such as, but not limited to, university/college transcripts and degrees should be submitted online with your application. Proof of education will be required at time of appointment. Position/job titles will not be considered in determining eligibility for meeting the minimum qualifications for this position. If you’re requesting Veteran’s credit, a copy of your DD214 must be submitted online with your application or emailed to the Employment Office by the final filing deadline. Information regarding the use of Veteran’s credit can be found in the Civil Service Board rules under rule 4.9C. Applicants are responsible for attaching a copy of their DD214 to each position for which they apply. 2. Training and Experience Exam : (Weighted 100%) - The questions located at the end of the application are the Training and Experience (T&E) Exam. Responses to the T&E questions will be rated and scored. This exam will evaluate the relevance, level, and progression of a candidate's education, training and experience. The exam score will determine your ranking on the eligible list for this job. When completing the T&E questions, please note: Responses to the T&E questions must be submitted online; paper questionnaires will not be accepted. A resume will not substitute for the information required in the T&E questions. 3. Eligibility : Candidates who pass the Training and Experience Test will be placed on the eligible list. The hiring department may contact candidates for interview at any time during the life of the one-year list. Candidate’s eligibility expires one year from the date of notification of a passing score for the Instrument Technician II examination. 4. Screening Committee : (Pass/Fail)- All candidates that pass the examination and are in one of the top three ranks will have their application forwarded to the hiring department for review. The hiring department will select the most competitive applications for further consideration. Human Resources will only evaluate employment applications for the minimum qualifications, as stated on the job announcement, for applications selected by the hiring department. 5. Conditional Hire: Upon receipt of a conditional offer, the selected candidate must complete and pass Live Scan/fingerprinting. If applicable, candidates may also need to pass a pre-employment medical exam, controlled substance and/or alcohol test, and possess any required licensure or certification prior to receiving a start date from the Department. Failure to meet these prerequisites will be grounds for withdrawal of your conditional offer of employment. QUESTIONS: For questions concerning this job announcement and the application process: Please visit https://www.governmentjobs.com/Home/ApplicationGuide for a comprehensive, step-by-step guide to the application process. For technical support between 6 AM - 5 PM PT, contact Live Applicant Support at (855) 524-5627. Visit the City of Sacramento Human Resources Department website at https://www.cityofsacramento.gov/HR/employment ; Send an email to employment@cityofsacramento.org ; or Call the Human Resources Department at (916) 808-5726 Bilingual Pay Did you know that the City offers bilingual pay? That's right, most labor agreements offer the option of providing employees with bilingual pay if the department deems it to be operationally necessary. Pension Reform Act The City of Sacramento is covered by the California Public Employees' Retirement System, and as such, must adhere to the California Public Employee's Pension Reform Act (PEPRA) of 2013. Please note that the provisions within this act may affect or impact an applicant's eligibility and/or selection for open vacancies at the City of Sacramento. Equal Opportunity Employer The City of Sacramento is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. Additional Information Civil Service Rules: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/CivilServiceBoardRules62012.pdf Union Contracts: https://www.cityofsacramento.gov/HR/labor-agreements.html Salary Schedule: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/SalarySchedule.pdf Closing Date/Time: 6/12/2024 11:59 PM Pacific
LA County Sanitation District
Compton Field Office, California, United States
JOB POSTING NOTICE OF EXTERNAL RECRUITMENT POSTING #SG-324-22E ELECTRICAL AND INSTRUMENTATION TECHNICIAN The Sanitation Districts of Los Angeles County is recruiting for a Electrical and Instrumentation Technician at our Compton Field Office. The essential functions of this position are to perform progressively more skilled work in the installation, maintenance, and repair of instrumentation, computer process control, and electrical equipment and systems. The Sanitation Districts are a non-civil service public agency separate from Los Angeles County government. The Districts serve the wastewater and solid waste management needs of approximately 5.6 million people across a service area that covers approximately 850 square miles and encompasses 78 cities and unincorporated territory within the county. We are nationally recognized for innovative engineering practices in wastewater treatment, solid waste management, and power generation. Working hours are 7:00 a.m. - 3:30 p.m., Monday - Friday. After hour overtime and weekend callbacks will sometimes be required. This is an excellent career opportunity, with comprehensive benefits including medical, dental, retirement, along with paid vacation, sick leave and holidays. Additional benefit information can be viewed by clicking on the Benefits tab. Initial salary placement will be based on the selected candidate's qualifications. JOB SUMMARY: Under the general supervision of a Supervisor of Electrical and Instrumentation Repair, incumbents assemble, install, maintain, calibrate, troubleshoot and repair and/or replace electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; operate, maintain, calibrate and repair pneumatic and electronic testing and measuring instruments; maintain records and prepare reports on maintenance and repair work, calibration readings and related data; order parts, supplies and equipment; instruct lower level classes in the series; read, interpret and prepare schematic diagrams, blueprints, sketches and equipment specifications; perform math calculations related to the trades; drive to and perform inspections on new construction; maintain shop area; and perform related duties as required. The ELECTRICAL AND INSTRUMENTATION TECHNICIAN is the journey level class of the series. Incumbents perform a wide variety of skilled tasks utilizing a comprehensive knowledge of the trade. MINIMUM QUALIFICATIONS Applicants must possess a valid California Class C driver license; -AND- at the ELECTRICAL AND INSTRUMENTATION TECHNICIAN level, applicants must possess four years of experience in the Electrical and Instrumentation Technician Apprentice classes with the County Sanitation Districts of Los Angeles County, or equivalent, performing progressively responsible installation, maintenance and repair work on instrumentation, computer process control and electrical equipment and systems. Twelve units of college coursework, approved by the Districts, or completion of one year of a two-year degree or certification program in instrumentation, electronics or electrical technology, or a closely related field may be substituted for one year of the required experience; - OR - Completion of a two-year degree or certification program in instrumentation, electronics or electrical technology, or a closely related field may be substituted for two years of the required experience. EXAMPLES OF ASSESSMENT CRITERIA The competitive selection process for ELECTRICAL AND INSTRUMENTATION TECHNICIAN may cover a knowledge of : Theories, principles, practices, tools, math formulas and safety considerations used in the installation, maintenance and repair of electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; plant operational systems. The ability to : Utilize specialized tools, math formulas and equipment of the trade; independently troubleshoot and repair electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; read, interpret and prepare schematic diagrams, blueprints, sketches and equipment specifications; maintain records and prepare reports; independently perform difficult assignments; instruct lower level apprentices in trade techniques. ADDITIONAL INFORMATION Please apply online at www.lacsd.org within the application period. Resumes will not be accepted in lieu of a completed LACSD Employment Application or online application. Check your email regularly throughout the recruitment process as notifications may be sent via e-mail. Please make sure that your registered email address is accurate and current. To ensure proper delivery add info@governmentjobs.com to your contact list. TO APPLY: Apply now via an “Internal Application” which can now be completed and submitted online through the Sanitation Districts’ website at www.lacsd.org . Please click on the “Employment Opportunities” link and select the “Internal Opportunities” option. By using the online application system you will receive confirmation via e-mail that your application was received for this position. If you do not have Internet access, you may submit a complete paper “Internal Application” within the application period shown above to the Employment Services Section (JAO, Room 109). All applications will be reviewed to determine if the conditions and qualifications for testing are met. SELECTION PROCESS: SELECTION PROCESS: Applications and Supplemental Questions will be reviewed and evaluated for relevant experience. Candidates considered to have the best qualifications will be invited to the written exam. Candidates must receive a qualifying score on each selection component to move forward in the selection process. The selection process will consist of a written test weighted at 25%; a performance exam weighted 25% and an interview weighted at 50 An eligibility list will be established based upon a combination of the qualified candidate's exams and interview score. NOTE: Prior to appointment, a thorough reference check will be conducted. The recommended candidate must undergo a job related pre-employment physical, which includes a drug and alcohol test. Candidates are also subject to a review of their DMV records for moving violations, chargeable accidents or more serious charges. For questions regarding this recruitment, please contact Shelley Glasman at ext. 1340 . As an equal opportunity employer, the Districts strongly encourage qualified minorities, women and disabled persons to apply. To learn more about how the Sanitation Districts converts waste in to resources, please visit the following video: Converting Waste into Resources RETIREMENT CALPERS: The Districts belong to the California Public Employees' Retirement System (CalPERS), and all monthly status new hires will be enrolled in CalPERS. Most new hires will be enrolled in the defined benefit formula of 2% @ 62 in accordance with the Public Employees’ Pension Reform Act (PEPRA) and are required to contribute to the plan (7.75% for the 23/24 fiscal year). Those who qualify based on current or previous public service may be enrolled in the defined benefit formula in place on December 31, 2012, which was 2% @ 55 and are considered “classic” members. For “classic” members, the Districts pay the “employee share.” Please contact the Human Resources Department for more information regarding contribution rates. Although Districts employees are exempt from Social Security, employees are required by federal law to contribute a percentage of their salary for Medicare coverage. DEFERRED COMP MATCH: For some bargaining units, the Districts provides a matching contribution to an eligible deferred compensation plan pursuant to Section 457 of the Internal Revenue Code. The match with each paycheck will be the lesser of: 3% of the employee's base monthly salary as listed in the Salary Schedule; and the amount the employee is contributing with that paycheck. The annual total combined employee and employer contribution are subject to IRS limits. COMPENSATION Employees receive annual salary increases until reaching step 5 of the salary range and are provided with opportunities to promote. Cost of living adjustments are implemented annually in accordance with labor agreements. HEALTH INSURANCE MEDICAL: Districts paid. Employees may choose from several HMO and Indemnity plans. As of January 1, 2024, the Districts contribute $2,202.87 per month for medical insurance. Depending on the choice of health plan, the Districts contribution covers all or a large portion of the premium for family coverage. DENTAL: Districts paid. The Districts pay the full premium for employee and dependent coverage for a prepaid dental program which provides for most routine dental care through a panel of contracting dentists with no deductibles. Employees are eligible to enroll in an indemnity plan if requested within thirty days after completion of three years of employment (sooner for some bargaining units), or during subsequent open enrollment periods. VISION: Employee paid. LIFE: The Districts pay for a term life policy. Employees can buy additional types and amounts of life insurance coverage at group rates. LEAVE TIME VACATION: Employees receive 88 hours of paid vacation after one full year of service, increasing up to 128 hours per year after five years, 168 hours per year after 15 years and up to 208 hours after 25 years. Prior to one year of full service, employees are given partial vacation time on January 1, based on the time worked in the preceding year. SICK LEAVE : Eight hours of full-pay sick leave per month. PERSONAL LEAVE: Employees may use up to 24 hours per calendar year from current sick leave for personal reasons. Some bargaining units allow up to 40 hours per calendar year from current sick leave for personal reasons. HOLIDAYS 13 paid holidays and one-half paid holiday depending on the employee's work schedule. TUITION REIMBURSEMENT Employees may be eligible for tuition reimbursement for approved accredited course work. STUDENT LOAN PAYMENT REIMBURSEMENT For some bargaining units, the Districts will provide student loan payment reimbursements for principal or interest paid by the employee on a qualified education loan incurred by the employee for the education of the employee. The annual maximum reimbursement is $5,250 and the lifetime reimbursement limit is $21,000. WORK ENVIRONMENT & OTHER BENEFITS A rewarding career contributing to society and the environment. Flexible work schedules (e.g. 9/80 schedule) depending on the worksite. Clear policies and procedures. Health and safety programs. Carpool opportunities with monetary incentives depending on the worksite. More detailed benefits information can be found here: Districts Benefits NOTE: The provisions of this posting do not constitute an expressed or implied contract. Any provision contained in this posting may be modified and/or revoked without notice. Updated December 29, 2023 Closing Date/Time: Continuous
Apr 21, 2024
Full Time
JOB POSTING NOTICE OF EXTERNAL RECRUITMENT POSTING #SG-324-22E ELECTRICAL AND INSTRUMENTATION TECHNICIAN The Sanitation Districts of Los Angeles County is recruiting for a Electrical and Instrumentation Technician at our Compton Field Office. The essential functions of this position are to perform progressively more skilled work in the installation, maintenance, and repair of instrumentation, computer process control, and electrical equipment and systems. The Sanitation Districts are a non-civil service public agency separate from Los Angeles County government. The Districts serve the wastewater and solid waste management needs of approximately 5.6 million people across a service area that covers approximately 850 square miles and encompasses 78 cities and unincorporated territory within the county. We are nationally recognized for innovative engineering practices in wastewater treatment, solid waste management, and power generation. Working hours are 7:00 a.m. - 3:30 p.m., Monday - Friday. After hour overtime and weekend callbacks will sometimes be required. This is an excellent career opportunity, with comprehensive benefits including medical, dental, retirement, along with paid vacation, sick leave and holidays. Additional benefit information can be viewed by clicking on the Benefits tab. Initial salary placement will be based on the selected candidate's qualifications. JOB SUMMARY: Under the general supervision of a Supervisor of Electrical and Instrumentation Repair, incumbents assemble, install, maintain, calibrate, troubleshoot and repair and/or replace electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; operate, maintain, calibrate and repair pneumatic and electronic testing and measuring instruments; maintain records and prepare reports on maintenance and repair work, calibration readings and related data; order parts, supplies and equipment; instruct lower level classes in the series; read, interpret and prepare schematic diagrams, blueprints, sketches and equipment specifications; perform math calculations related to the trades; drive to and perform inspections on new construction; maintain shop area; and perform related duties as required. The ELECTRICAL AND INSTRUMENTATION TECHNICIAN is the journey level class of the series. Incumbents perform a wide variety of skilled tasks utilizing a comprehensive knowledge of the trade. MINIMUM QUALIFICATIONS Applicants must possess a valid California Class C driver license; -AND- at the ELECTRICAL AND INSTRUMENTATION TECHNICIAN level, applicants must possess four years of experience in the Electrical and Instrumentation Technician Apprentice classes with the County Sanitation Districts of Los Angeles County, or equivalent, performing progressively responsible installation, maintenance and repair work on instrumentation, computer process control and electrical equipment and systems. Twelve units of college coursework, approved by the Districts, or completion of one year of a two-year degree or certification program in instrumentation, electronics or electrical technology, or a closely related field may be substituted for one year of the required experience; - OR - Completion of a two-year degree or certification program in instrumentation, electronics or electrical technology, or a closely related field may be substituted for two years of the required experience. EXAMPLES OF ASSESSMENT CRITERIA The competitive selection process for ELECTRICAL AND INSTRUMENTATION TECHNICIAN may cover a knowledge of : Theories, principles, practices, tools, math formulas and safety considerations used in the installation, maintenance and repair of electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; plant operational systems. The ability to : Utilize specialized tools, math formulas and equipment of the trade; independently troubleshoot and repair electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; read, interpret and prepare schematic diagrams, blueprints, sketches and equipment specifications; maintain records and prepare reports; independently perform difficult assignments; instruct lower level apprentices in trade techniques. ADDITIONAL INFORMATION Please apply online at www.lacsd.org within the application period. Resumes will not be accepted in lieu of a completed LACSD Employment Application or online application. Check your email regularly throughout the recruitment process as notifications may be sent via e-mail. Please make sure that your registered email address is accurate and current. To ensure proper delivery add info@governmentjobs.com to your contact list. TO APPLY: Apply now via an “Internal Application” which can now be completed and submitted online through the Sanitation Districts’ website at www.lacsd.org . Please click on the “Employment Opportunities” link and select the “Internal Opportunities” option. By using the online application system you will receive confirmation via e-mail that your application was received for this position. If you do not have Internet access, you may submit a complete paper “Internal Application” within the application period shown above to the Employment Services Section (JAO, Room 109). All applications will be reviewed to determine if the conditions and qualifications for testing are met. SELECTION PROCESS: SELECTION PROCESS: Applications and Supplemental Questions will be reviewed and evaluated for relevant experience. Candidates considered to have the best qualifications will be invited to the written exam. Candidates must receive a qualifying score on each selection component to move forward in the selection process. The selection process will consist of a written test weighted at 25%; a performance exam weighted 25% and an interview weighted at 50 An eligibility list will be established based upon a combination of the qualified candidate's exams and interview score. NOTE: Prior to appointment, a thorough reference check will be conducted. The recommended candidate must undergo a job related pre-employment physical, which includes a drug and alcohol test. Candidates are also subject to a review of their DMV records for moving violations, chargeable accidents or more serious charges. For questions regarding this recruitment, please contact Shelley Glasman at ext. 1340 . As an equal opportunity employer, the Districts strongly encourage qualified minorities, women and disabled persons to apply. To learn more about how the Sanitation Districts converts waste in to resources, please visit the following video: Converting Waste into Resources RETIREMENT CALPERS: The Districts belong to the California Public Employees' Retirement System (CalPERS), and all monthly status new hires will be enrolled in CalPERS. Most new hires will be enrolled in the defined benefit formula of 2% @ 62 in accordance with the Public Employees’ Pension Reform Act (PEPRA) and are required to contribute to the plan (7.75% for the 23/24 fiscal year). Those who qualify based on current or previous public service may be enrolled in the defined benefit formula in place on December 31, 2012, which was 2% @ 55 and are considered “classic” members. For “classic” members, the Districts pay the “employee share.” Please contact the Human Resources Department for more information regarding contribution rates. Although Districts employees are exempt from Social Security, employees are required by federal law to contribute a percentage of their salary for Medicare coverage. DEFERRED COMP MATCH: For some bargaining units, the Districts provides a matching contribution to an eligible deferred compensation plan pursuant to Section 457 of the Internal Revenue Code. The match with each paycheck will be the lesser of: 3% of the employee's base monthly salary as listed in the Salary Schedule; and the amount the employee is contributing with that paycheck. The annual total combined employee and employer contribution are subject to IRS limits. COMPENSATION Employees receive annual salary increases until reaching step 5 of the salary range and are provided with opportunities to promote. Cost of living adjustments are implemented annually in accordance with labor agreements. HEALTH INSURANCE MEDICAL: Districts paid. Employees may choose from several HMO and Indemnity plans. As of January 1, 2024, the Districts contribute $2,202.87 per month for medical insurance. Depending on the choice of health plan, the Districts contribution covers all or a large portion of the premium for family coverage. DENTAL: Districts paid. The Districts pay the full premium for employee and dependent coverage for a prepaid dental program which provides for most routine dental care through a panel of contracting dentists with no deductibles. Employees are eligible to enroll in an indemnity plan if requested within thirty days after completion of three years of employment (sooner for some bargaining units), or during subsequent open enrollment periods. VISION: Employee paid. LIFE: The Districts pay for a term life policy. Employees can buy additional types and amounts of life insurance coverage at group rates. LEAVE TIME VACATION: Employees receive 88 hours of paid vacation after one full year of service, increasing up to 128 hours per year after five years, 168 hours per year after 15 years and up to 208 hours after 25 years. Prior to one year of full service, employees are given partial vacation time on January 1, based on the time worked in the preceding year. SICK LEAVE : Eight hours of full-pay sick leave per month. PERSONAL LEAVE: Employees may use up to 24 hours per calendar year from current sick leave for personal reasons. Some bargaining units allow up to 40 hours per calendar year from current sick leave for personal reasons. HOLIDAYS 13 paid holidays and one-half paid holiday depending on the employee's work schedule. TUITION REIMBURSEMENT Employees may be eligible for tuition reimbursement for approved accredited course work. STUDENT LOAN PAYMENT REIMBURSEMENT For some bargaining units, the Districts will provide student loan payment reimbursements for principal or interest paid by the employee on a qualified education loan incurred by the employee for the education of the employee. The annual maximum reimbursement is $5,250 and the lifetime reimbursement limit is $21,000. WORK ENVIRONMENT & OTHER BENEFITS A rewarding career contributing to society and the environment. Flexible work schedules (e.g. 9/80 schedule) depending on the worksite. Clear policies and procedures. Health and safety programs. Carpool opportunities with monetary incentives depending on the worksite. More detailed benefits information can be found here: Districts Benefits NOTE: The provisions of this posting do not constitute an expressed or implied contract. Any provision contained in this posting may be modified and/or revoked without notice. Updated December 29, 2023 Closing Date/Time: Continuous
Clark County Water Reclamation District
Las Vegas, NV, United States
ABOUT THE POSITION The Clark County Water Reclamation District is seeking qualified candidates to apply for the WRD Control Systems Technician I/II position. This position will be primarily responsible for: Performing new installations, maintenance, calibrations and repair of automated equipment controls, sensors and instrumentation at District facilities. Timely and concise communication with technical and non-technical staff, salespeople, consultants, contractors, and the public. Assisting staff with troubleshooting, installations and retrofit of control systems as required for reliable and consistent treatment process operation. Assisting in the design and design review of new facilities with a focus on process instrumentation and control systems. Conducting electric motor controls troubleshooting, installations and configuration of automated equipment. WRD Control Systems Technician I: $25.29 - $39.16 Hourly Click here to view a complete description of the job classification. WRD Control Systems Technician II: $27.29 - $42.28 Hourly Click here to view a complete description of the job classification. This recruitment will establish an Open Competitive Eligibility list to fill current and/or future vacancies that may occur within the next six (6) months or may be extended as needed by Human Resources. Human Resources reserves the right to call only the most qualified applicants to the selection process. MINIMUM REQUIREMENTS Education and Experience: WRD Control Systems Technician I Equivalent to high school graduation and two (2) years experience, training, and/or formal education directly related to fabrication, installation, maintenance and repair of electronic equipment, instrumentation or industrial control systems. WRD Control Systems Technician II In addition to the above, one (1) year of experience in the maintenance, malfunction analysis, and calibration of instrumentation and industrial electronic control systems with the ability shown to function with minimal supervision. Qualifying education and experience must be clearly documented in the "Education" and "Work Experience" sections of the application. Do not substitute a resume for your application or write "see attached resume" on your application. Working Conditions: Work is subject to performance under adverse environmental conditions. Locations include workshop, field, lift stations and wastewater treatment plant environments. Additionally, incumbent may encounter construction site environments, travel from site to site and occasionally work in confined spaces. Incumbent may be exposed to noise and electrical hazards; inclement weather conditions, dust, wastewater, hazardous or infectious materials, oils, lubricants, toxic chemicals and gases during the performance of duties. Licensing and Certification: Must possess a valid Class C Nevada driver's license at time of appointment. Background Investigation: Employment is contingent upon successful completion of a background investigation. Periodically after employment background investigations may be conducted. Medical Examination: Employment is contingent upon the results of a physical examination performed by our examining physician. Pre-Employment Drug Testing: Employment is contingent upon the results of a pre-employment drug examination. EXAMPLES OF DUTIES Click here to view a complete description of the job classification. PHYSICAL DEMANDS Click here to view a complete description of the job classification. Closing Date/Time: 6/4/2024 5:01 PM Pacific
Apr 24, 2024
Full Time
ABOUT THE POSITION The Clark County Water Reclamation District is seeking qualified candidates to apply for the WRD Control Systems Technician I/II position. This position will be primarily responsible for: Performing new installations, maintenance, calibrations and repair of automated equipment controls, sensors and instrumentation at District facilities. Timely and concise communication with technical and non-technical staff, salespeople, consultants, contractors, and the public. Assisting staff with troubleshooting, installations and retrofit of control systems as required for reliable and consistent treatment process operation. Assisting in the design and design review of new facilities with a focus on process instrumentation and control systems. Conducting electric motor controls troubleshooting, installations and configuration of automated equipment. WRD Control Systems Technician I: $25.29 - $39.16 Hourly Click here to view a complete description of the job classification. WRD Control Systems Technician II: $27.29 - $42.28 Hourly Click here to view a complete description of the job classification. This recruitment will establish an Open Competitive Eligibility list to fill current and/or future vacancies that may occur within the next six (6) months or may be extended as needed by Human Resources. Human Resources reserves the right to call only the most qualified applicants to the selection process. MINIMUM REQUIREMENTS Education and Experience: WRD Control Systems Technician I Equivalent to high school graduation and two (2) years experience, training, and/or formal education directly related to fabrication, installation, maintenance and repair of electronic equipment, instrumentation or industrial control systems. WRD Control Systems Technician II In addition to the above, one (1) year of experience in the maintenance, malfunction analysis, and calibration of instrumentation and industrial electronic control systems with the ability shown to function with minimal supervision. Qualifying education and experience must be clearly documented in the "Education" and "Work Experience" sections of the application. Do not substitute a resume for your application or write "see attached resume" on your application. Working Conditions: Work is subject to performance under adverse environmental conditions. Locations include workshop, field, lift stations and wastewater treatment plant environments. Additionally, incumbent may encounter construction site environments, travel from site to site and occasionally work in confined spaces. Incumbent may be exposed to noise and electrical hazards; inclement weather conditions, dust, wastewater, hazardous or infectious materials, oils, lubricants, toxic chemicals and gases during the performance of duties. Licensing and Certification: Must possess a valid Class C Nevada driver's license at time of appointment. Background Investigation: Employment is contingent upon successful completion of a background investigation. Periodically after employment background investigations may be conducted. Medical Examination: Employment is contingent upon the results of a physical examination performed by our examining physician. Pre-Employment Drug Testing: Employment is contingent upon the results of a pre-employment drug examination. EXAMPLES OF DUTIES Click here to view a complete description of the job classification. PHYSICAL DEMANDS Click here to view a complete description of the job classification. Closing Date/Time: 6/4/2024 5:01 PM Pacific
LA County Sanitation District
Warren - A.K. Warren Water Resource Facility, California, United States
JOB POSTING NOTICE OF EXTERNAL RECRUITMENT SELECTION #LA-110-23E ELECTRICAL AND INSTRUMENTATION TECHNICIAN (3 Positions) Our Wastewater Management Department is recruiting for Journey level Electrical and Instrumentation Technicians in Carson at our Joint Water Pollution Control Plant. The essential functions of this position are to perform progressively more skilled work in the installation, maintenance, and repair of instrumentation, computer process control, and electrical equipment and systems. The agency consists of 24 independent special districts serving about 5.5 million people in Los Angeles County. We operate and maintain the regional wastewater collection system, which includes approximately 1,400 miles of sewers, 49 pumping plants, and 11 wastewater treatment plants that transport and treat about half the wastewater in Los Angeles County. Over the last 60 years, the Sanitation Districts have been the nation's largest producer of recycled water. The positions offer a 9/80 schedule of Monday-Thursday (6:00am-3:30pm) and the working Friday (6:00am-2:30pm). Regular Days Off (RDO) are alternating Fridays. After hour, overtime, and weekend callbacks will sometimes be required. This is an excellent career opportunity with comprehensive benefits including: medical, dental, retirement, along with paid vacation, sick leave and holidays. Additional benefit information can be viewed by clicking on the Benefits tab. Initial salary placement will be based on the selected candidate's qualifications. JOB SUMMARY: Under the general supervision of a Supervisor of Electrical and Instrumentation Repair, incumbents assemble, install, maintain, calibrate, troubleshoot and repair and/or replace electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; operate, maintain, calibrate and repair pneumatic and electronic testing and measuring instruments; maintain records and prepare reports on maintenance and repair work, calibration readings and related data; order parts, supplies and equipment; instruct lower level classes in the series; read, interpret and prepare schematic diagrams, blueprints, sketches and equipment specifications; perform math calculations related to the trades; drive to and perform inspections on new construction; maintain shop area; and perform related duties as required. The ELECTRICAL AND INSTRUMENTATION TECHNICIAN is the journey level class of the series. Incumbents perform a wide variety of skilled tasks utilizing a comprehensive knowledge of the trade. MINIMUM QUALIFICATIONS Candidates must possess four years of experience performing progressively responsible installation, maintenance and repair work on instrumentation, computer process control and electrical equipment and systems. Candidates may substitute twelve units of college course work or completion of one year of a two-year degree or certification program in instrumentation, electronics or electrical technology, or a closely related field for one year of the required experience -OR- candidates may substitute completion of a two-year degree or certification program in instrumentation, electronics or electrical technology, or a closely related field for two years of the required experience. EXAMPLES OF ASSESSMENT CRITERIA The competitive selection process for ELECTRICAL AND INSTRUMENTATION TECHNICIAN may cover a knowledge of : Theories, principles, practices, tools, math formulas and safety considerations used in the installation, maintenance and repair of electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; plant operational systems. The ability to : Utilize specialized tools, math formulas and equipment of the trade; independently troubleshoot and repair electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; read, interpret and prepare schematic diagrams, blueprints, sketches and equipment specifications; maintain records and prepare reports; independently perform difficult assignments; instruct lower level apprentices in trade techniques. ADDITIONAL INFORMATION SELECTION PROCESS: All applications will be reviewed to determine if the conditions and qualifications for testing are met. The selection process will consist of a written test weighted at 25%; a performance exam weighted 25% and an interview weighted at 50%. Candidates must receive a qualifying score on each selection component to move forward in the selection process. Please apply online at www.lacsd.org within the application period. Resumes will not be accepted in lieu of a completed LACSD Employment application. Check your e-mail regularly throughout the recruitment process as notifications are sent via e-mail. Please make sure that your registered e-mail address is accurate and current. To ensure proper delivery add info@governmentjobs.com to your contact list. NOTE: The individual(s) recommended for hire must undergo a job-related pre-employment physical, as well as a reference check, background, check, DMV report, and a drug test. To learn more about how the Sanitation Districts convert waste into resources, please visit the following video: Converting Waste into Resources . For more information regarding this recruitment, please contact Luz Avila at lavila@lcsd.org or (562) 908-4288 extension 1329. As an equal opportunity employer, the Districts strongly encourage people with disabilities and people from historically marginalized communities to apply. RETIREMENT CALPERS: The Districts belong to the California Public Employees' Retirement System (CalPERS), and all monthly status new hires will be enrolled in CalPERS. Most new hires will be enrolled in the defined benefit formula of 2% @ 62 in accordance with the Public Employees’ Pension Reform Act (PEPRA) and are required to contribute to the plan (7.75% for the 23/24 fiscal year). Those who qualify based on current or previous public service may be enrolled in the defined benefit formula in place on December 31, 2012, which was 2% @ 55 and are considered “classic” members. For “classic” members, the Districts pay the “employee share.” Please contact the Human Resources Department for more information regarding contribution rates. Although Districts employees are exempt from Social Security, employees are required by federal law to contribute a percentage of their salary for Medicare coverage. DEFERRED COMP MATCH: For some bargaining units, the Districts provides a matching contribution to an eligible deferred compensation plan pursuant to Section 457 of the Internal Revenue Code. The match with each paycheck will be the lesser of: 3% of the employee's base monthly salary as listed in the Salary Schedule; and the amount the employee is contributing with that paycheck. The annual total combined employee and employer contribution are subject to IRS limits. COMPENSATION Employees receive annual salary increases until reaching step 5 of the salary range and are provided with opportunities to promote. Cost of living adjustments are implemented annually in accordance with labor agreements. HEALTH INSURANCE MEDICAL: Districts paid. Employees may choose from several HMO and Indemnity plans. As of January 1, 2024, the Districts contribute $2,202.87 per month for medical insurance. Depending on the choice of health plan, the Districts contribution covers all or a large portion of the premium for family coverage. DENTAL: Districts paid. The Districts pay the full premium for employee and dependent coverage for a prepaid dental program which provides for most routine dental care through a panel of contracting dentists with no deductibles. Employees are eligible to enroll in an indemnity plan if requested within thirty days after completion of three years of employment (sooner for some bargaining units), or during subsequent open enrollment periods. VISION: Employee paid. LIFE: The Districts pay for a term life policy. Employees can buy additional types and amounts of life insurance coverage at group rates. LEAVE TIME VACATION: Employees receive 88 hours of paid vacation after one full year of service, increasing up to 128 hours per year after five years, 168 hours per year after 15 years and up to 208 hours after 25 years. Prior to one year of full service, employees are given partial vacation time on January 1, based on the time worked in the preceding year. SICK LEAVE : Eight hours of full-pay sick leave per month. PERSONAL LEAVE: Employees may use up to 24 hours per calendar year from current sick leave for personal reasons. Some bargaining units allow up to 40 hours per calendar year from current sick leave for personal reasons. HOLIDAYS 13 paid holidays and one-half paid holiday depending on the employee's work schedule. TUITION REIMBURSEMENT Employees may be eligible for tuition reimbursement for approved accredited course work. STUDENT LOAN PAYMENT REIMBURSEMENT For some bargaining units, the Districts will provide student loan payment reimbursements for principal or interest paid by the employee on a qualified education loan incurred by the employee for the education of the employee. The annual maximum reimbursement is $5,250 and the lifetime reimbursement limit is $21,000. WORK ENVIRONMENT & OTHER BENEFITS A rewarding career contributing to society and the environment. Flexible work schedules (e.g. 9/80 schedule) depending on the worksite. Clear policies and procedures. Health and safety programs. Carpool opportunities with monetary incentives depending on the worksite. More detailed benefits information can be found here: Districts Benefits NOTE: The provisions of this posting do not constitute an expressed or implied contract. Any provision contained in this posting may be modified and/or revoked without notice. Updated December 29, 2023 Closing Date/Time: Continuous
Mar 07, 2024
Full Time
JOB POSTING NOTICE OF EXTERNAL RECRUITMENT SELECTION #LA-110-23E ELECTRICAL AND INSTRUMENTATION TECHNICIAN (3 Positions) Our Wastewater Management Department is recruiting for Journey level Electrical and Instrumentation Technicians in Carson at our Joint Water Pollution Control Plant. The essential functions of this position are to perform progressively more skilled work in the installation, maintenance, and repair of instrumentation, computer process control, and electrical equipment and systems. The agency consists of 24 independent special districts serving about 5.5 million people in Los Angeles County. We operate and maintain the regional wastewater collection system, which includes approximately 1,400 miles of sewers, 49 pumping plants, and 11 wastewater treatment plants that transport and treat about half the wastewater in Los Angeles County. Over the last 60 years, the Sanitation Districts have been the nation's largest producer of recycled water. The positions offer a 9/80 schedule of Monday-Thursday (6:00am-3:30pm) and the working Friday (6:00am-2:30pm). Regular Days Off (RDO) are alternating Fridays. After hour, overtime, and weekend callbacks will sometimes be required. This is an excellent career opportunity with comprehensive benefits including: medical, dental, retirement, along with paid vacation, sick leave and holidays. Additional benefit information can be viewed by clicking on the Benefits tab. Initial salary placement will be based on the selected candidate's qualifications. JOB SUMMARY: Under the general supervision of a Supervisor of Electrical and Instrumentation Repair, incumbents assemble, install, maintain, calibrate, troubleshoot and repair and/or replace electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; operate, maintain, calibrate and repair pneumatic and electronic testing and measuring instruments; maintain records and prepare reports on maintenance and repair work, calibration readings and related data; order parts, supplies and equipment; instruct lower level classes in the series; read, interpret and prepare schematic diagrams, blueprints, sketches and equipment specifications; perform math calculations related to the trades; drive to and perform inspections on new construction; maintain shop area; and perform related duties as required. The ELECTRICAL AND INSTRUMENTATION TECHNICIAN is the journey level class of the series. Incumbents perform a wide variety of skilled tasks utilizing a comprehensive knowledge of the trade. MINIMUM QUALIFICATIONS Candidates must possess four years of experience performing progressively responsible installation, maintenance and repair work on instrumentation, computer process control and electrical equipment and systems. Candidates may substitute twelve units of college course work or completion of one year of a two-year degree or certification program in instrumentation, electronics or electrical technology, or a closely related field for one year of the required experience -OR- candidates may substitute completion of a two-year degree or certification program in instrumentation, electronics or electrical technology, or a closely related field for two years of the required experience. EXAMPLES OF ASSESSMENT CRITERIA The competitive selection process for ELECTRICAL AND INSTRUMENTATION TECHNICIAN may cover a knowledge of : Theories, principles, practices, tools, math formulas and safety considerations used in the installation, maintenance and repair of electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; plant operational systems. The ability to : Utilize specialized tools, math formulas and equipment of the trade; independently troubleshoot and repair electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; read, interpret and prepare schematic diagrams, blueprints, sketches and equipment specifications; maintain records and prepare reports; independently perform difficult assignments; instruct lower level apprentices in trade techniques. ADDITIONAL INFORMATION SELECTION PROCESS: All applications will be reviewed to determine if the conditions and qualifications for testing are met. The selection process will consist of a written test weighted at 25%; a performance exam weighted 25% and an interview weighted at 50%. Candidates must receive a qualifying score on each selection component to move forward in the selection process. Please apply online at www.lacsd.org within the application period. Resumes will not be accepted in lieu of a completed LACSD Employment application. Check your e-mail regularly throughout the recruitment process as notifications are sent via e-mail. Please make sure that your registered e-mail address is accurate and current. To ensure proper delivery add info@governmentjobs.com to your contact list. NOTE: The individual(s) recommended for hire must undergo a job-related pre-employment physical, as well as a reference check, background, check, DMV report, and a drug test. To learn more about how the Sanitation Districts convert waste into resources, please visit the following video: Converting Waste into Resources . For more information regarding this recruitment, please contact Luz Avila at lavila@lcsd.org or (562) 908-4288 extension 1329. As an equal opportunity employer, the Districts strongly encourage people with disabilities and people from historically marginalized communities to apply. RETIREMENT CALPERS: The Districts belong to the California Public Employees' Retirement System (CalPERS), and all monthly status new hires will be enrolled in CalPERS. Most new hires will be enrolled in the defined benefit formula of 2% @ 62 in accordance with the Public Employees’ Pension Reform Act (PEPRA) and are required to contribute to the plan (7.75% for the 23/24 fiscal year). Those who qualify based on current or previous public service may be enrolled in the defined benefit formula in place on December 31, 2012, which was 2% @ 55 and are considered “classic” members. For “classic” members, the Districts pay the “employee share.” Please contact the Human Resources Department for more information regarding contribution rates. Although Districts employees are exempt from Social Security, employees are required by federal law to contribute a percentage of their salary for Medicare coverage. DEFERRED COMP MATCH: For some bargaining units, the Districts provides a matching contribution to an eligible deferred compensation plan pursuant to Section 457 of the Internal Revenue Code. The match with each paycheck will be the lesser of: 3% of the employee's base monthly salary as listed in the Salary Schedule; and the amount the employee is contributing with that paycheck. The annual total combined employee and employer contribution are subject to IRS limits. COMPENSATION Employees receive annual salary increases until reaching step 5 of the salary range and are provided with opportunities to promote. Cost of living adjustments are implemented annually in accordance with labor agreements. HEALTH INSURANCE MEDICAL: Districts paid. Employees may choose from several HMO and Indemnity plans. As of January 1, 2024, the Districts contribute $2,202.87 per month for medical insurance. Depending on the choice of health plan, the Districts contribution covers all or a large portion of the premium for family coverage. DENTAL: Districts paid. The Districts pay the full premium for employee and dependent coverage for a prepaid dental program which provides for most routine dental care through a panel of contracting dentists with no deductibles. Employees are eligible to enroll in an indemnity plan if requested within thirty days after completion of three years of employment (sooner for some bargaining units), or during subsequent open enrollment periods. VISION: Employee paid. LIFE: The Districts pay for a term life policy. Employees can buy additional types and amounts of life insurance coverage at group rates. LEAVE TIME VACATION: Employees receive 88 hours of paid vacation after one full year of service, increasing up to 128 hours per year after five years, 168 hours per year after 15 years and up to 208 hours after 25 years. Prior to one year of full service, employees are given partial vacation time on January 1, based on the time worked in the preceding year. SICK LEAVE : Eight hours of full-pay sick leave per month. PERSONAL LEAVE: Employees may use up to 24 hours per calendar year from current sick leave for personal reasons. Some bargaining units allow up to 40 hours per calendar year from current sick leave for personal reasons. HOLIDAYS 13 paid holidays and one-half paid holiday depending on the employee's work schedule. TUITION REIMBURSEMENT Employees may be eligible for tuition reimbursement for approved accredited course work. STUDENT LOAN PAYMENT REIMBURSEMENT For some bargaining units, the Districts will provide student loan payment reimbursements for principal or interest paid by the employee on a qualified education loan incurred by the employee for the education of the employee. The annual maximum reimbursement is $5,250 and the lifetime reimbursement limit is $21,000. WORK ENVIRONMENT & OTHER BENEFITS A rewarding career contributing to society and the environment. Flexible work schedules (e.g. 9/80 schedule) depending on the worksite. Clear policies and procedures. Health and safety programs. Carpool opportunities with monetary incentives depending on the worksite. More detailed benefits information can be found here: Districts Benefits NOTE: The provisions of this posting do not constitute an expressed or implied contract. Any provision contained in this posting may be modified and/or revoked without notice. Updated December 29, 2023 Closing Date/Time: Continuous
Orange County Sanitation District, CA
Orange, California, United States
Description What do you value in your next job? At the Orange County Sanitation District our Core Values form the framework of our organization and reinforce our professional work ethic. If the following values ring true with you, we'd love to invite you to explore our career opportunities further. Integrity, Inclusion, Honesty, and Respect We aspire to the highest degree of integrity, inclusion, honesty, and respect in our interaction with each other, our suppliers, our customers, and our community. We strive to demonstrate these values in our actions, commitments, and service. Leadership, Teamwork, and Problem Solving We lead by example, acknowledging the value of our resources and using them wisely to achieve our mission. We strive to reach OC San goals through cooperative efforts and collaboration with each other and our constituencies. We work to solve problems in a creative, cost-effective, and safe manner, and we acknowledge team and individual efforts. Customer Service, Transparency, and Accountability We are committed to acting in a timely, accurate, accessible, and transparent manner through excellent customer service. We are committed to act in the best interest of our internal and external stakeholders. Resiliency, Innovation, and Learning We continuously develop ourselves, enhancing our talents, skills, and abilities. We recognize that only through personal growth and development will we progress as an agency and as individuals. Safety We are committed to providing a safe work environment. We will demonstrate leadership, promote individual accountability, and participate actively in the advancement of our health and safety practices. OC San is currently looking to fill the role of an Instrumentation Technician II . Under supervision, the Instrumentation Technician II performs a variety of complex assignments in the installation, maintenance, and calibration of process control instrumentation and related equipment. This individual implements additions or modifications of control systems; troubleshoots and repairs electrical, electronic, microprocessor-based, pneumatic, and mechanical process control components. The Instrumentation Technician II identifies, isolates, and diagnoses failures using various types of test equipment; interprets schematic and loop drawings; and coordinates repairs with other divisions as necessary. Other duties will include installing, modifying, and reprogramming process control components, HVAC control systems, VFD's, panels, cables, and PLC (programmable logic controller) systems; determining measurements; and developing drawings for installations. This person will be responsible for ordering equipment, parts, and supplies for installation of systems; installing parts, equipment, piping, and wiring per design specifications; calibrating the instruments; testing the systems; correcting any failures; and coordinating installation with other divisions as necessary. Qualifications & Requirements Requirements: High school diploma or G.E.D. supplemented by specialized training or coursework such as relevant trade school in instrumentation technology or a related field. Three (3) years of increasingly responsible experience maintaining, calibrating, installing, troubleshooting, and repairing electrical, pneumatic, and mechanical process control instruments. Must possess a valid California Class C Driver's License. Desired: Knowledge of instrumentation and controls (I&C) systems' calibration and maintenance with conventional/best-practice/industry-standard methods, tools, equipment, and safety procedures. ISA Certified Control Systems Technician (CCST) certification or successful completion of an I&C formal apprenticeship and/or accredited training program. Effective and efficient troubleshooting and repair skills with extensive experience in I&C systems related to wastewater/chemical processing, electrical power generation with internal combustion engines, generators, and emissions monitoring, PLC/SCADA/DCS systems, and industrial control networking systems. Create, process, and review field data and other technical documentation to produce reports/analyses, proficiently use computer applications, such as MS Outlook, MS Excel, MS Word, and IBM Maximo, and communicate clearly both verbally and in writing. Recruitment & Selection Process Vacancies: 1 (an eligible list may be established for future vacancies) Apply online at: www.ocsan.gov/jobs APPLICATION FILING DEADLINE: Thursday, May 23rd, 2024; 5:00 P.M. (or until a sufficient number of qualified applications have been received) Hiring Salary Range: $48.47 - $53.45/Hour* *(starting salary will be within this range based upon qualifications) Supplemental Information PHYSICAL DEMANDS Mobility to work in and around wastewater treatment plants, pump/lift stations, and related utility systems and facilities; to sit, stand, and walk on level, uneven, or slippery surfaces; frequently reach, twist, turn, kneel, bend, stoop, squat, crouch, grasp, and make repetitive hand movement in the performance of daily duties; to climb and descend ladders, to operate varied hand and power tools and equipment, and to operate a motor vehicle and visit various OC San sites, projects, and/or meetings. Perform moderate to heavy physical work; to lift, carry, push, and pull materials and objects averaging a weight of 51 pounds or heavier weights, in all cases with the use of proper equipment and/or assistance from other staff. Possible entry into confined spaces and the use of confined entry equipment and protective safety equipment. Vision to inspect and operate equipment. Field work requiring frequent walking in operational areas to identify problems or hazards. Finger dexterity to operate and repair tools and equipment. ENVIRONMENTAL ELEMENTS Field work in and around facilities with exposure to loud noise levels, cold and hot temperatures, inclement weather conditions, road hazards, vibration, confining workspace, heights, chemicals, mechanical and/or electrical hazards, hazardous physical substances and fumes, dust, and air contaminants. Employees may interact with upset staff and/or public and private representatives in interpreting and enforcing departmental policies and procedures. OTHER REQUIREMENTS May be required to work extended hours, including nights, weekends, and holidays when necessary. Standby and Call Back: Employees in this classification may be required to participate in standby duty and are subject to call back, which may include nights, weekends and 24-hour emergency call out with little or no notice. Any employee designated to serve on standby, or report to an emergency, and refuses to do such, shall be subject to disciplinary action up to and including termination. Probationary Period: All OC San employees, except classifications considered "at-will", are subject to the probationary period provisions as specified in the applicable Memorandum of Understanding, policies, and/or resolutions. Employees who have not yet successfully completed their initial probationary period serve "at-will" and may be released from employment without cause or recourse to any appeal or grievance procedures. Pre-Employment: All employment offers are contingent upon successful completion of OC San's pre-employment process, which includes a background investigation, a physical examination, and a drug screen. Work Location Assignment: Employees will be assigned to a work location based on business needs which may be located at any/all of OC San locations; this work location may be changed at any time. DISASTER SERVICE WORKERS All Orange County Sanitation District employees are designated Disaster Service Workers through state law (California Government Code Section 3100-3109). Employment with the Orange County Sanitation District requires the affirmation of a loyalty oath to this effect. Employees are required to complete all related training as assigned, and to return to work as ordered in the event of an emergency. OTHER INFORMATION For the full range of duties, responsibilities, and essential job functions please review the Classification Specification for this position found on our website. Applicants must clearly demonstrate, through their application materials, that they meet the minimum requirements as outlined in the job announcement and class specification to receive further consideration. However, meeting the minimum requirements does not guarantee an interview. All properly completed applications will be reviewed, and the most appropriately qualified individuals will be invited to continue in the selection process. False statements may be cause for disqualification, removal from the eligible list, or discharge from employment. All statements made on applications are subject to investigation and verification. To ensure your application is accurate and complete, please review the Job Application Guide. Employment is contingent upon successful completion of OC San's pre-employment process, which includes a background investigation and a physical examination. For some positions, this may include a drug screen. False statements may be cause for disqualification, removal from the eligible list, or discharge from employment. All statements made on applications are subject to investigation and verification. Reference Checks will be conducted by OC San to verify employment related information for all potential employees once a contingent job offer is made during the background investigation process. This is done to ensure that individuals who join OC San are well qualified and have a strong potential to be successful in their employment. The extent of the inquiry will depend on the position being applied for, but will at least include: Verification/Reference from current and past employers Confirmation of necessary licenses, certificates, and degrees. Please have all necessary documentation ready. Additional inquiries may be necessary depending on the position for which you are applying. Human Resources will also schedule a post-offer physical examination once a job offer has been made. OC San only accepts applications submitted via our online application system. Applications submitted via mail, fax or email will not be accepted. The provisions of this announcement do not constitute an expressed or implied contract. Any provision contained in this announcement may be modified or revoked without notice. Personal leave credits; eleven paid holidays and one floating holiday; group life insurance; group disability insurance; group health insurance, dependent coverage available, including medical, dental, and vision, employee contribution is required; a retirement plan (Orange County Employees Retirement System) and the option of participating in a deferred compensation plan as well as other optional benefits. A credit union is available. Benefits are subject to the Board of Directors' periodic determination (usually annually) and the meet and confer process, and are therefore subject to change. The District makes a generous contribution toward the cost of these benefits. 01 PLEASE READ. The information provided on the Supplemental Questions will be used in conjunction with your job application to determine whether you meet the qualification requirements. Failure to provide detailed and complete information may result in your application being rejected. Do not submit a resume in place of completing these Supplemental Questions. Education obtained outside the United States must be comparable to education earned at an accredited school in the United States. We reserve the right to request further information about your academic program, evidence of comparability, or an original transcript. Any information you submit may be verified. When applying for this position, I understand that I must thoroughly complete the Education and Work Experience sections of my application and the Supplemental Questions. This includes a detailed description of each position that I feel qualifies me for the job I am seeking. I have read the above statement and understand that failure to provide sufficient detailed information may result in my application being rejected. I also understand that I may not submit a resume in lieu of filling out the job application or answering the Supplemental Questions. However, I may attach a resume to the application to provide additional information. Yes, I understand. 02 Do you possess a high school diploma or GED? ( NOTE: If you answered yes, include all pertinent details in the education section of your job application). Yes No 03 Do you have any specialized training or coursework such as relevant trade school in instrumentation technology or a related field? Yes No 04 Briefly describe any specialized training, college level course work, and/or trade school training you have completed in the instrumentation or electrical trades. Limit your answer to a small paragraph. Please note, "see resume" is not an acceptable response. If not applicable, please input N/A. 05 Do you possess a minimum of three (3) years of experience maintaining, calibrating, installing, troubleshooting, and repairing electrical, pneumatic, and mechanical process control instruments? Yes No 06 If you answered "Yes" to the previous question, briefly describe your experience maintaining, calibrating, installing, troubleshooting and repairing electrical, pneumatic, and mechanical process control instruments. If you answered "No", input "N/A". 07 Do you currently possess any relevant certifications? Yes No 08 If you answered "yes" to the previous question, please indicate which certification(s) and grade (if applicable) you currently possess. If not applicable, please input N/A. 09 Please list the types of process control instruments and analyzers you have been responsible for installing, maintaining, calibrating, and troubleshooting. Also include the length of time (years) that you have been working with these instruments. If not applicable, type "N/A". 10 Include any additional information you feel is relevant and should be evaluated, including, but not limited to, experience with control systems, PLC/SCADA/DCS system, industrial communications networks, analyzers, power generation, etc. Limit your answer to 1-2 paragraphs. If not applicable, please input N/A. 11 Do you possess, or have the ability to obtain, a valid California Class C Driver's License by time of appointment? Yes No 12 All OC San employees are designated Disaster Service Workers through state law (California Government Code Section 3100-3109). Employment with the OC San requires the affirmation of a loyalty oath to this effect. Employees are required to complete all related training as assigned, and to return to work as ordered in the event of an emergency. Click on the radio button below to acknowledge you understand these requirements. Yes, I understand. Required Question Closing Date/Time: 5/23/2024 5:00 PM Pacific
May 10, 2024
Full Time
Description What do you value in your next job? At the Orange County Sanitation District our Core Values form the framework of our organization and reinforce our professional work ethic. If the following values ring true with you, we'd love to invite you to explore our career opportunities further. Integrity, Inclusion, Honesty, and Respect We aspire to the highest degree of integrity, inclusion, honesty, and respect in our interaction with each other, our suppliers, our customers, and our community. We strive to demonstrate these values in our actions, commitments, and service. Leadership, Teamwork, and Problem Solving We lead by example, acknowledging the value of our resources and using them wisely to achieve our mission. We strive to reach OC San goals through cooperative efforts and collaboration with each other and our constituencies. We work to solve problems in a creative, cost-effective, and safe manner, and we acknowledge team and individual efforts. Customer Service, Transparency, and Accountability We are committed to acting in a timely, accurate, accessible, and transparent manner through excellent customer service. We are committed to act in the best interest of our internal and external stakeholders. Resiliency, Innovation, and Learning We continuously develop ourselves, enhancing our talents, skills, and abilities. We recognize that only through personal growth and development will we progress as an agency and as individuals. Safety We are committed to providing a safe work environment. We will demonstrate leadership, promote individual accountability, and participate actively in the advancement of our health and safety practices. OC San is currently looking to fill the role of an Instrumentation Technician II . Under supervision, the Instrumentation Technician II performs a variety of complex assignments in the installation, maintenance, and calibration of process control instrumentation and related equipment. This individual implements additions or modifications of control systems; troubleshoots and repairs electrical, electronic, microprocessor-based, pneumatic, and mechanical process control components. The Instrumentation Technician II identifies, isolates, and diagnoses failures using various types of test equipment; interprets schematic and loop drawings; and coordinates repairs with other divisions as necessary. Other duties will include installing, modifying, and reprogramming process control components, HVAC control systems, VFD's, panels, cables, and PLC (programmable logic controller) systems; determining measurements; and developing drawings for installations. This person will be responsible for ordering equipment, parts, and supplies for installation of systems; installing parts, equipment, piping, and wiring per design specifications; calibrating the instruments; testing the systems; correcting any failures; and coordinating installation with other divisions as necessary. Qualifications & Requirements Requirements: High school diploma or G.E.D. supplemented by specialized training or coursework such as relevant trade school in instrumentation technology or a related field. Three (3) years of increasingly responsible experience maintaining, calibrating, installing, troubleshooting, and repairing electrical, pneumatic, and mechanical process control instruments. Must possess a valid California Class C Driver's License. Desired: Knowledge of instrumentation and controls (I&C) systems' calibration and maintenance with conventional/best-practice/industry-standard methods, tools, equipment, and safety procedures. ISA Certified Control Systems Technician (CCST) certification or successful completion of an I&C formal apprenticeship and/or accredited training program. Effective and efficient troubleshooting and repair skills with extensive experience in I&C systems related to wastewater/chemical processing, electrical power generation with internal combustion engines, generators, and emissions monitoring, PLC/SCADA/DCS systems, and industrial control networking systems. Create, process, and review field data and other technical documentation to produce reports/analyses, proficiently use computer applications, such as MS Outlook, MS Excel, MS Word, and IBM Maximo, and communicate clearly both verbally and in writing. Recruitment & Selection Process Vacancies: 1 (an eligible list may be established for future vacancies) Apply online at: www.ocsan.gov/jobs APPLICATION FILING DEADLINE: Thursday, May 23rd, 2024; 5:00 P.M. (or until a sufficient number of qualified applications have been received) Hiring Salary Range: $48.47 - $53.45/Hour* *(starting salary will be within this range based upon qualifications) Supplemental Information PHYSICAL DEMANDS Mobility to work in and around wastewater treatment plants, pump/lift stations, and related utility systems and facilities; to sit, stand, and walk on level, uneven, or slippery surfaces; frequently reach, twist, turn, kneel, bend, stoop, squat, crouch, grasp, and make repetitive hand movement in the performance of daily duties; to climb and descend ladders, to operate varied hand and power tools and equipment, and to operate a motor vehicle and visit various OC San sites, projects, and/or meetings. Perform moderate to heavy physical work; to lift, carry, push, and pull materials and objects averaging a weight of 51 pounds or heavier weights, in all cases with the use of proper equipment and/or assistance from other staff. Possible entry into confined spaces and the use of confined entry equipment and protective safety equipment. Vision to inspect and operate equipment. Field work requiring frequent walking in operational areas to identify problems or hazards. Finger dexterity to operate and repair tools and equipment. ENVIRONMENTAL ELEMENTS Field work in and around facilities with exposure to loud noise levels, cold and hot temperatures, inclement weather conditions, road hazards, vibration, confining workspace, heights, chemicals, mechanical and/or electrical hazards, hazardous physical substances and fumes, dust, and air contaminants. Employees may interact with upset staff and/or public and private representatives in interpreting and enforcing departmental policies and procedures. OTHER REQUIREMENTS May be required to work extended hours, including nights, weekends, and holidays when necessary. Standby and Call Back: Employees in this classification may be required to participate in standby duty and are subject to call back, which may include nights, weekends and 24-hour emergency call out with little or no notice. Any employee designated to serve on standby, or report to an emergency, and refuses to do such, shall be subject to disciplinary action up to and including termination. Probationary Period: All OC San employees, except classifications considered "at-will", are subject to the probationary period provisions as specified in the applicable Memorandum of Understanding, policies, and/or resolutions. Employees who have not yet successfully completed their initial probationary period serve "at-will" and may be released from employment without cause or recourse to any appeal or grievance procedures. Pre-Employment: All employment offers are contingent upon successful completion of OC San's pre-employment process, which includes a background investigation, a physical examination, and a drug screen. Work Location Assignment: Employees will be assigned to a work location based on business needs which may be located at any/all of OC San locations; this work location may be changed at any time. DISASTER SERVICE WORKERS All Orange County Sanitation District employees are designated Disaster Service Workers through state law (California Government Code Section 3100-3109). Employment with the Orange County Sanitation District requires the affirmation of a loyalty oath to this effect. Employees are required to complete all related training as assigned, and to return to work as ordered in the event of an emergency. OTHER INFORMATION For the full range of duties, responsibilities, and essential job functions please review the Classification Specification for this position found on our website. Applicants must clearly demonstrate, through their application materials, that they meet the minimum requirements as outlined in the job announcement and class specification to receive further consideration. However, meeting the minimum requirements does not guarantee an interview. All properly completed applications will be reviewed, and the most appropriately qualified individuals will be invited to continue in the selection process. False statements may be cause for disqualification, removal from the eligible list, or discharge from employment. All statements made on applications are subject to investigation and verification. To ensure your application is accurate and complete, please review the Job Application Guide. Employment is contingent upon successful completion of OC San's pre-employment process, which includes a background investigation and a physical examination. For some positions, this may include a drug screen. False statements may be cause for disqualification, removal from the eligible list, or discharge from employment. All statements made on applications are subject to investigation and verification. Reference Checks will be conducted by OC San to verify employment related information for all potential employees once a contingent job offer is made during the background investigation process. This is done to ensure that individuals who join OC San are well qualified and have a strong potential to be successful in their employment. The extent of the inquiry will depend on the position being applied for, but will at least include: Verification/Reference from current and past employers Confirmation of necessary licenses, certificates, and degrees. Please have all necessary documentation ready. Additional inquiries may be necessary depending on the position for which you are applying. Human Resources will also schedule a post-offer physical examination once a job offer has been made. OC San only accepts applications submitted via our online application system. Applications submitted via mail, fax or email will not be accepted. The provisions of this announcement do not constitute an expressed or implied contract. Any provision contained in this announcement may be modified or revoked without notice. Personal leave credits; eleven paid holidays and one floating holiday; group life insurance; group disability insurance; group health insurance, dependent coverage available, including medical, dental, and vision, employee contribution is required; a retirement plan (Orange County Employees Retirement System) and the option of participating in a deferred compensation plan as well as other optional benefits. A credit union is available. Benefits are subject to the Board of Directors' periodic determination (usually annually) and the meet and confer process, and are therefore subject to change. The District makes a generous contribution toward the cost of these benefits. 01 PLEASE READ. The information provided on the Supplemental Questions will be used in conjunction with your job application to determine whether you meet the qualification requirements. Failure to provide detailed and complete information may result in your application being rejected. Do not submit a resume in place of completing these Supplemental Questions. Education obtained outside the United States must be comparable to education earned at an accredited school in the United States. We reserve the right to request further information about your academic program, evidence of comparability, or an original transcript. Any information you submit may be verified. When applying for this position, I understand that I must thoroughly complete the Education and Work Experience sections of my application and the Supplemental Questions. This includes a detailed description of each position that I feel qualifies me for the job I am seeking. I have read the above statement and understand that failure to provide sufficient detailed information may result in my application being rejected. I also understand that I may not submit a resume in lieu of filling out the job application or answering the Supplemental Questions. However, I may attach a resume to the application to provide additional information. Yes, I understand. 02 Do you possess a high school diploma or GED? ( NOTE: If you answered yes, include all pertinent details in the education section of your job application). Yes No 03 Do you have any specialized training or coursework such as relevant trade school in instrumentation technology or a related field? Yes No 04 Briefly describe any specialized training, college level course work, and/or trade school training you have completed in the instrumentation or electrical trades. Limit your answer to a small paragraph. Please note, "see resume" is not an acceptable response. If not applicable, please input N/A. 05 Do you possess a minimum of three (3) years of experience maintaining, calibrating, installing, troubleshooting, and repairing electrical, pneumatic, and mechanical process control instruments? Yes No 06 If you answered "Yes" to the previous question, briefly describe your experience maintaining, calibrating, installing, troubleshooting and repairing electrical, pneumatic, and mechanical process control instruments. If you answered "No", input "N/A". 07 Do you currently possess any relevant certifications? Yes No 08 If you answered "yes" to the previous question, please indicate which certification(s) and grade (if applicable) you currently possess. If not applicable, please input N/A. 09 Please list the types of process control instruments and analyzers you have been responsible for installing, maintaining, calibrating, and troubleshooting. Also include the length of time (years) that you have been working with these instruments. If not applicable, type "N/A". 10 Include any additional information you feel is relevant and should be evaluated, including, but not limited to, experience with control systems, PLC/SCADA/DCS system, industrial communications networks, analyzers, power generation, etc. Limit your answer to 1-2 paragraphs. If not applicable, please input N/A. 11 Do you possess, or have the ability to obtain, a valid California Class C Driver's License by time of appointment? Yes No 12 All OC San employees are designated Disaster Service Workers through state law (California Government Code Section 3100-3109). Employment with the OC San requires the affirmation of a loyalty oath to this effect. Employees are required to complete all related training as assigned, and to return to work as ordered in the event of an emergency. Click on the radio button below to acknowledge you understand these requirements. Yes, I understand. Required Question Closing Date/Time: 5/23/2024 5:00 PM Pacific
SAN ANTONIO WATER SYSTEM
San Antonio, Texas, United States
Grade 19 - Starting hourly rate: $29.2658. Rate of pay depends on qualifications. Job Description JO B SUMMARY The Senior Control Systems Technician is responsible for the installation, maintenance, programming, commissioning, and troubleshooting of process control systems. Under limited supervision, the Senior Control Systems Technician is responsible for efficiently prioritizing, planning, and completing the workload as assigned. The technician works as part of the instrument and controls team to meet SAWS’ mission statement. The incumbent attends required safety training and follows all safety standards. E SS E N T I A L FUNCTIONS Performs complex maintenance, troubleshooting, calibration, programming, and system administration of Process Control Systems (SCADA and DCS), Programmable Logic Controllers (PLCs), control and instrument loops, field instrumentation, chemical analysis systems, variable frequency drives, communication network systems, hazardous chemical distribution and detection systems, and HMI computer workstations. Performs installation and implementation of process instrumentation, Programmable Logic Controllers ((PLC's), PLC-based control and instrument loops, communication network systems (Serial/IP/Radio), hazardous chemical distribution/detection systems, and chemical analyzer equipment. Ensures proper software application and systems programming necessary for maintaining and troubleshooting PLC’s, HMI, Radio, and other field equipment. Creates, maintains, and updates critical information using various applications and programs. Reviews, and prepares reports from databases with information regarding assigned work orders, equipment calibration, repair, and inventory. Coordinates and facilitates monthly group meetings. Participates in design review and construction process. Reviews prints for conformity to SAWS and accepted industry standards in process control systems and instrumentation principles, practices, procedures, and terminology. Evaluates and specifies instrumentation. Provides technical guidance and training to control system technicians for special projects and PCS control systems. Performs other duties as assigned. DE C I S I O N MAKING The Senior Control Systems Technician works under limited supervision and is expected to take individual initiative in planning and performing work. Coordinates technicians of different trades in order to carry out repair and installation of complex control systems and instrumentation. M INI MU M REQUIREMENTS Associate degree in Instrumentation, Electronics, Industrial Fields or a related field or 60 college hours from an institution accredited by a nationally recognized accredited agency, or a State of Texas Journeyman Electrician License. Three years’ experience in the maintenance, troubleshooting, calibration, repair, and installation of control and instrument loops, field instrumentation, or hazardous chemical distribution/detection systems, including two years’ experience in PLC hardware and software, SCADA/DCS fundamentals. Valid Class “C” Texas Driver’s License. Ability to report to work on time, maintain a good attendance record, and work all designated work schedules. PR EFE R R E D QUALIFICATIONS Instrument Society of America Certification. Cisco certification or approved network certification. Experience in potable and non-potable water industries. Certification that relates to the essential job functions. Work order and maintenance management systems experience. Proficient skills in programming of Programmable Logic Controllers (PLCs) and Human-Machine Interface (HMI) computer workstations. J O B DIMENSIONS Thorough knowledge in communications systems protocols, including hardware and software for wired and wireless network systems. Skill in using desktop business applications, including Excel, Word, PowerPoint, Visio, and Access. Ability to work effectively in both a team and an individual self-directed environment, including coordination with end users, internal and external customers, consultants and vendors. Ability to communicate effectively, verbally and in writing. Ability to work hours other than regular schedule such as days, nights, weekends, holidays, on-call and rotating shifts. Ability to operate a company vehicle on a daily basis. Ability to proficiently utilize laptop computers, oscilloscopes, multi-meters, signal generators, communication service monitors and other calibration equipment. PH Y S I C A L DEMANDS AND WORKING CONDITIONS Physical requirements include, visual acuity, color vision, standing, sitting, walking, climbing, bending, crawling, squatting, kneeling and working in cramped and strained positions for long periods of time, and the ability to lift up to 75 pounds. Working conditions are primarily outside with frequent exposure to inclement weather; wastewater; mechanical, electrical, chemical and confined space hazards; offensive fumes; excessive noise; heavy traffic; deep excavations; animals, snakes and poisonous insects. May be required to comply with requirements as specified in applicable regulations for personal protective equipment, including clearance for use of respiratory protection and other associated equipment. San Antonio Water System values the contributions of all its employees, providing them the best in compensation and benefits. The benefits package is designed to attract and retain a workforce of qualified employees who share a responsibility in providing quality water to 1 million consumers. From an affordable medical and dental plan to life-sustaining retirement and insurance plans, we offer benefits that reward employees for their commitment to a challenging career at SAWS. Employee benefits include the following: Competitive, market-based salaries Performance-based incentives Medical benefits Dental benefits Life insurance Prescription drug program Vision care plan Two retirement plans Deferred compensation plans (457 plan) Disability income Paid leave (vacation, sick, personal) Education assistance program Employee assistance program Flexible, tax-deferred health and dependent care spending accounts Wellness programs On-Site Fitness Facilities Community service opportunities Closing Date/Time: 5/26/2024 11:59 PM Central
Apr 19, 2024
Full Time
Grade 19 - Starting hourly rate: $29.2658. Rate of pay depends on qualifications. Job Description JO B SUMMARY The Senior Control Systems Technician is responsible for the installation, maintenance, programming, commissioning, and troubleshooting of process control systems. Under limited supervision, the Senior Control Systems Technician is responsible for efficiently prioritizing, planning, and completing the workload as assigned. The technician works as part of the instrument and controls team to meet SAWS’ mission statement. The incumbent attends required safety training and follows all safety standards. E SS E N T I A L FUNCTIONS Performs complex maintenance, troubleshooting, calibration, programming, and system administration of Process Control Systems (SCADA and DCS), Programmable Logic Controllers (PLCs), control and instrument loops, field instrumentation, chemical analysis systems, variable frequency drives, communication network systems, hazardous chemical distribution and detection systems, and HMI computer workstations. Performs installation and implementation of process instrumentation, Programmable Logic Controllers ((PLC's), PLC-based control and instrument loops, communication network systems (Serial/IP/Radio), hazardous chemical distribution/detection systems, and chemical analyzer equipment. Ensures proper software application and systems programming necessary for maintaining and troubleshooting PLC’s, HMI, Radio, and other field equipment. Creates, maintains, and updates critical information using various applications and programs. Reviews, and prepares reports from databases with information regarding assigned work orders, equipment calibration, repair, and inventory. Coordinates and facilitates monthly group meetings. Participates in design review and construction process. Reviews prints for conformity to SAWS and accepted industry standards in process control systems and instrumentation principles, practices, procedures, and terminology. Evaluates and specifies instrumentation. Provides technical guidance and training to control system technicians for special projects and PCS control systems. Performs other duties as assigned. DE C I S I O N MAKING The Senior Control Systems Technician works under limited supervision and is expected to take individual initiative in planning and performing work. Coordinates technicians of different trades in order to carry out repair and installation of complex control systems and instrumentation. M INI MU M REQUIREMENTS Associate degree in Instrumentation, Electronics, Industrial Fields or a related field or 60 college hours from an institution accredited by a nationally recognized accredited agency, or a State of Texas Journeyman Electrician License. Three years’ experience in the maintenance, troubleshooting, calibration, repair, and installation of control and instrument loops, field instrumentation, or hazardous chemical distribution/detection systems, including two years’ experience in PLC hardware and software, SCADA/DCS fundamentals. Valid Class “C” Texas Driver’s License. Ability to report to work on time, maintain a good attendance record, and work all designated work schedules. PR EFE R R E D QUALIFICATIONS Instrument Society of America Certification. Cisco certification or approved network certification. Experience in potable and non-potable water industries. Certification that relates to the essential job functions. Work order and maintenance management systems experience. Proficient skills in programming of Programmable Logic Controllers (PLCs) and Human-Machine Interface (HMI) computer workstations. J O B DIMENSIONS Thorough knowledge in communications systems protocols, including hardware and software for wired and wireless network systems. Skill in using desktop business applications, including Excel, Word, PowerPoint, Visio, and Access. Ability to work effectively in both a team and an individual self-directed environment, including coordination with end users, internal and external customers, consultants and vendors. Ability to communicate effectively, verbally and in writing. Ability to work hours other than regular schedule such as days, nights, weekends, holidays, on-call and rotating shifts. Ability to operate a company vehicle on a daily basis. Ability to proficiently utilize laptop computers, oscilloscopes, multi-meters, signal generators, communication service monitors and other calibration equipment. PH Y S I C A L DEMANDS AND WORKING CONDITIONS Physical requirements include, visual acuity, color vision, standing, sitting, walking, climbing, bending, crawling, squatting, kneeling and working in cramped and strained positions for long periods of time, and the ability to lift up to 75 pounds. Working conditions are primarily outside with frequent exposure to inclement weather; wastewater; mechanical, electrical, chemical and confined space hazards; offensive fumes; excessive noise; heavy traffic; deep excavations; animals, snakes and poisonous insects. May be required to comply with requirements as specified in applicable regulations for personal protective equipment, including clearance for use of respiratory protection and other associated equipment. San Antonio Water System values the contributions of all its employees, providing them the best in compensation and benefits. The benefits package is designed to attract and retain a workforce of qualified employees who share a responsibility in providing quality water to 1 million consumers. From an affordable medical and dental plan to life-sustaining retirement and insurance plans, we offer benefits that reward employees for their commitment to a challenging career at SAWS. Employee benefits include the following: Competitive, market-based salaries Performance-based incentives Medical benefits Dental benefits Life insurance Prescription drug program Vision care plan Two retirement plans Deferred compensation plans (457 plan) Disability income Paid leave (vacation, sick, personal) Education assistance program Employee assistance program Flexible, tax-deferred health and dependent care spending accounts Wellness programs On-Site Fitness Facilities Community service opportunities Closing Date/Time: 5/26/2024 11:59 PM Central
Irvine Ranch Water District, CA
Irvine, California, United States
General Description Irvine Ranch Water District is currently accepting applications for two (2) Electrical & Instrumentation Technicians. The District Irvine Ranch Water District (IRWD) is a progressive, values-driven agency, with an international reputation for its leading-edge financial management practices, water recycling program, water use efficiency practices, water banking, urban runoff treatment, and energy generation and storage. Established in 1961 as a California Water District under the provisions of the California Water Code, IRWD is an independent special district serving central Orange County. IRWD provides high-quality drinking water, reliable sewage collection and treatment, ground-breaking recycled water programs, and environmentally sound urban runoff treatment to its customers. As an independent, not-for-profit public agency, IRWD is governed by a publicly elected five-member Board of Directors. The Board is responsible for the District's policies and decision-making. Day-to-day operations are supervised by the General Manager. Additional information can be found at the District's website: www.IRWD.com. The Position Under general supervision, Electrical & Instrumentation Technicians perform a wide variety of skilled journey-level duties in maintenance, design, modification, construction, installation, and repair of electrical and instrumentation systems, machinery, motors, equipment, devices, plant control systems, and related facilities of District domestic and reclaimed water distribution systems, sewage collection systems, water treatment systems and Bio-solids and gas recovery systems. Provide quality and cost-effective service to customers. DISTINGUISHING CHARACTERISTICS This is a skilled journey-level position within the class series. Incumbents perform technical journey-level duties working on electrical systems including motor controls, motors, power panels etc., perform preventive, corrective, predictive and demand maintenance on all electrical and instrumentation systems. Summary of Duties Install, maintain, calibrate, repair, troubleshoot, test, and modify: Electrical equipment and systems - electric motors, motorized valves, hand and power tools, conduit and wire systems, electrical inspections and start-up testing, building and area lighting, repair enunciation systems, access control systems, cathodic protection, etc. Control Systems - Motor controls, variable frequency drives (VFD's), engine controls, lighting controls. Instrument control loops, PLCs, HVAC controls, pneumatic control systems, etc. Power Distribution Systems - 5 KV power distribution systems, switchboards, motor control centers (MCC's), transformers, power panels, grounding systems, generators, automatic transfer switches, uninterruptable power supply (UPS) systems, solar arrays, etc. Instrumentation systems- Analytical instrumentation (PH, conductivity, turbidity, DO, ORP, chlorine, etc.), safety instrumentation (fixed and portable gas detectors, LEL detectors, etc.), process control instrumentation (air and water flow meters, Proportional Integral Derivative (PID) controllers, level and pressure instrumentation, chemical injection systems, etc.) Read and interpret electrical drawings, schematics, power distribution drawings, control panel wiring diagrams, and installation manuals for electrical and instrumentation systems. Provide working drawings. Work on electrical systems up to and including 4160 volts when called upon. This would include motor controls, motors, power panels, etc. Perform preventive, corrective, predictive, and demand maintenance on all electrical and instrumentation systems. Requisition supplies, materials, tools and equipment utilizing a computerized Purchase Requisition system to ensure maintenance of stock and supply. Process and track work orders utilizing a Computerized Maintenance Management system (CMMS). Utilize the Oracle and other District utilized computerized system(s). Coordinate and work with outside agencies and companies to complete assigned tasks. Participate in the department after-hours standby program. Work in vaults and other confined spaces utilizing proper safety techniques and equipment in accordance with Cal-OSHA, District, and departmental safety policies and procedures. Comply with District safety work-related practices and attend relevant safety training. Perform other related duties as assigned. Qualifications Education: A combination of education and experience equivalent to one (1) year of college course work in the area of electronics is required. Associates Degree or Technical school equivalent in electricity or electronics preferred. Experience: Two (2) years of journey level experience installing and maintaining industrial or production electrical equipment, process instrumentation, analytical instrumentation or electronic equipment is required. License: A Valid California Class C driver's license is required. A current Electrical & Instrumentation Technologist I certification is desirable. Additional Information IRWD Corporate Values Irvine Ranch Water District believes that its values drive the character, culture, and capacity of our organization. IRWD was built on values, and we weave them into the fabric of everything we do. Values are the ingredients in our recipe for both institutional and individual success. They are a code of conduct to promote positive outcomes for others and ourselves. They are more than words on a wall or a website. We live by them every day. We pledge to keep them relevant in an ever-changing world. IRWD's employees enjoy working in a safe, supportive, and nurturing environment where they form strong bonds with fellow employees. To ensure effective communication and promote a collaborative team environment, employees report to work each day in the office or in the field, depending on their positions. The physical and mental demands described below are representative of those that must be met by employees to successfully perform the essential functions of this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability and Interpersonal Communication Ability to effectively communicate both oral and written. Ability to communicate effectively with all levels of office/field employees, management and vendors. Represent District in a professional manner when dealing with outside suppliers and customers. Ability to advise and provide interpretation to others on how to apply policies, procedures and standards to specific situations. Mathematical Ability Ability to add, subtract, multiply, divide, and calculate percentages, fractions and decimals. Knowledge of algebra, basic geometry and basic trigonometry. Technology Ability Proficient in the use of Microsoft Office Suite. Ability to utilize, IBM Maximo, and Oracle computerized system. Judgment and Situational Reasoning Ability Ability to use good personal judgment and discretion in performing all job functions. Read, interpret and apply National Electric Code and other NFPA guidelines in all applications. Physical Requirements Will lift 50 lbs. on a routine basis and 75 lbs. with assistance on an infrequent basis. Must be certified annually to wear respiratory equipment. Must be clean-shaven such that facial hair does not interfere with the fit of self-contained breathing apparatus. Ability to exert moderately heavy physical effort in moderate to heavy work, typically involving some combination of climbing and balancing, stooping, kneeling, crouching, crawling, lifting, carrying, pushing, and pulling. Ability to work at heights of 55 ft. Ability to operate equipment and machinery with some requiring complex and rapid adjustments, such as hand and power tools, facility and truck mounted cranes, forklifts, scaffoldings and man-lifts and test meters associated with the electrical/instrumentation trade. Environmental Adaptability Ability to work under sometimes uncomfortable conditions with exposure to environmental factors such as electricity up to 5 KV, explosive environments, weather, toxic agents, wildlife, disease, equipment, traffic, or machinery. IRWD offers a comprehensive benefits package for eligible employees and their eligible dependents. These benefits include the following: retirement benefits; medical, dental, vision, and life insurance; anda variety of other benefits. Benefits may vary based on employment status. This benefits overview is intended to be a summary, is not intended to be all-inclusive,and may not be applicable to all employees. Retirement Employees hired on or after January 1, 2013: The District, in compliance with the California Public Employees' Pension Reform Act of 2012 (PEPRA), implemented a third tier for new employees hired on or after January 1, 2013. New employees hired on or after January 1, 2013 who have not been in PERS membership or in membership with a reciprocal retirement system within 6 months of hire date will receive benefits under the California Public Employees Retirement System at a 2 percent at age 62 formula. This formula gradually increases to a maximum benefits of 2.5 percent at age 67. Final compensation calculations will be based on the highest three-year average of regular recurring pay. The District pays the employer's share of these costs. The employee share of the pension cost of 7.50% is paid in full by the employees hired under this formula. Employees hired on or after September 29, 2012 or "Classic" PERS members hired on or after January 1, 2013: On September 24, 2012, the IRWD Board of Directors approved the addition of a second tier to the CalPERS retirement benefits. New employees hired on or after September 29th through December 31, 2012, and employees hired on or after January 1, 2013 who have been in PERS membership or in membership with a reciprocal retirement system, will receive benefits under the California Public Employees Retirement System at 2 percent at age 60 formula. This formula gradually increases to a maximum benefit of 2.418% at age 63. The District pays the employer share of these costs and the employee share of the pension cost of 7% is paid in full by the employees hired under this formula. Final retirement compensation calculations are based on the highest three-year average of regular, recurring pay. IRWDdoes not participate or pay into Social Security except for the Medicare portion. Medical Insurance IRWD contracts with CalPERS for medical insurance coverage. Employees may elect coverage from a variety of PPO and HMO plans. The employee and District contribution for health insurance varies by plan.Coverage is effective the first day of the month following the date of hire. Dental Insurance IRWD contracts with Delta Dental for dental coverage.IRWD pays 100% of the premium for dental coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Vision Insurance IRWD contracts with the EyeMed for vision coverage. IRWD pays 100% of the premium for vision coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Life Insurance Elgible employees are provided with life insurance coverage equal to three or four times their annual salary, depending on their level of compensation. Eligible dependents are also covered for a flat benefit amount. Coverage is effective the first day of the month following the date of hire. Deferred Compensation Participation in adeferred compensation plan is available through Empower Retirement. Enrollment is voluntary and contributions are employee-paid and subject to IRS limits. The District matches employee contributions up to 3% of base pay after 1 year of employment. Paid Vacation Eligible employees begin accruing vacation benefits at the rate of 80 hours per year for the first 5 years of employment and are eligible to use paid vacation time after 6 months of employment. Employees accrue 120 hours per year after 5 years of employment and 160 hours per year after 10 years of employment. Paid Holidays The District offers 11 scheduled paid holidaysplus one personal holiday per year. Sick Leave Eligible employees accrue 96 hours of sick leave annually. Flexible Spending Accounts Eligible employees may elect to participate in the District's Flex Advantage program. This program allows employees to deposit pre-tax dollars into special accounts to be used for a variety of purposes, including paying for qualified miscellaneous health care expenses and dependent care expenses. IRWD contracts with a third party administer to process payments from employee accounts using claim forms or a Flex Spending debit card. Educational Assistance The District will share in the pre-approved educational costs of tuition and books for employees who wish to attend college or take certification classes. Closing Date/Time: Continuous
Apr 20, 2024
Full Time
General Description Irvine Ranch Water District is currently accepting applications for two (2) Electrical & Instrumentation Technicians. The District Irvine Ranch Water District (IRWD) is a progressive, values-driven agency, with an international reputation for its leading-edge financial management practices, water recycling program, water use efficiency practices, water banking, urban runoff treatment, and energy generation and storage. Established in 1961 as a California Water District under the provisions of the California Water Code, IRWD is an independent special district serving central Orange County. IRWD provides high-quality drinking water, reliable sewage collection and treatment, ground-breaking recycled water programs, and environmentally sound urban runoff treatment to its customers. As an independent, not-for-profit public agency, IRWD is governed by a publicly elected five-member Board of Directors. The Board is responsible for the District's policies and decision-making. Day-to-day operations are supervised by the General Manager. Additional information can be found at the District's website: www.IRWD.com. The Position Under general supervision, Electrical & Instrumentation Technicians perform a wide variety of skilled journey-level duties in maintenance, design, modification, construction, installation, and repair of electrical and instrumentation systems, machinery, motors, equipment, devices, plant control systems, and related facilities of District domestic and reclaimed water distribution systems, sewage collection systems, water treatment systems and Bio-solids and gas recovery systems. Provide quality and cost-effective service to customers. DISTINGUISHING CHARACTERISTICS This is a skilled journey-level position within the class series. Incumbents perform technical journey-level duties working on electrical systems including motor controls, motors, power panels etc., perform preventive, corrective, predictive and demand maintenance on all electrical and instrumentation systems. Summary of Duties Install, maintain, calibrate, repair, troubleshoot, test, and modify: Electrical equipment and systems - electric motors, motorized valves, hand and power tools, conduit and wire systems, electrical inspections and start-up testing, building and area lighting, repair enunciation systems, access control systems, cathodic protection, etc. Control Systems - Motor controls, variable frequency drives (VFD's), engine controls, lighting controls. Instrument control loops, PLCs, HVAC controls, pneumatic control systems, etc. Power Distribution Systems - 5 KV power distribution systems, switchboards, motor control centers (MCC's), transformers, power panels, grounding systems, generators, automatic transfer switches, uninterruptable power supply (UPS) systems, solar arrays, etc. Instrumentation systems- Analytical instrumentation (PH, conductivity, turbidity, DO, ORP, chlorine, etc.), safety instrumentation (fixed and portable gas detectors, LEL detectors, etc.), process control instrumentation (air and water flow meters, Proportional Integral Derivative (PID) controllers, level and pressure instrumentation, chemical injection systems, etc.) Read and interpret electrical drawings, schematics, power distribution drawings, control panel wiring diagrams, and installation manuals for electrical and instrumentation systems. Provide working drawings. Work on electrical systems up to and including 4160 volts when called upon. This would include motor controls, motors, power panels, etc. Perform preventive, corrective, predictive, and demand maintenance on all electrical and instrumentation systems. Requisition supplies, materials, tools and equipment utilizing a computerized Purchase Requisition system to ensure maintenance of stock and supply. Process and track work orders utilizing a Computerized Maintenance Management system (CMMS). Utilize the Oracle and other District utilized computerized system(s). Coordinate and work with outside agencies and companies to complete assigned tasks. Participate in the department after-hours standby program. Work in vaults and other confined spaces utilizing proper safety techniques and equipment in accordance with Cal-OSHA, District, and departmental safety policies and procedures. Comply with District safety work-related practices and attend relevant safety training. Perform other related duties as assigned. Qualifications Education: A combination of education and experience equivalent to one (1) year of college course work in the area of electronics is required. Associates Degree or Technical school equivalent in electricity or electronics preferred. Experience: Two (2) years of journey level experience installing and maintaining industrial or production electrical equipment, process instrumentation, analytical instrumentation or electronic equipment is required. License: A Valid California Class C driver's license is required. A current Electrical & Instrumentation Technologist I certification is desirable. Additional Information IRWD Corporate Values Irvine Ranch Water District believes that its values drive the character, culture, and capacity of our organization. IRWD was built on values, and we weave them into the fabric of everything we do. Values are the ingredients in our recipe for both institutional and individual success. They are a code of conduct to promote positive outcomes for others and ourselves. They are more than words on a wall or a website. We live by them every day. We pledge to keep them relevant in an ever-changing world. IRWD's employees enjoy working in a safe, supportive, and nurturing environment where they form strong bonds with fellow employees. To ensure effective communication and promote a collaborative team environment, employees report to work each day in the office or in the field, depending on their positions. The physical and mental demands described below are representative of those that must be met by employees to successfully perform the essential functions of this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability and Interpersonal Communication Ability to effectively communicate both oral and written. Ability to communicate effectively with all levels of office/field employees, management and vendors. Represent District in a professional manner when dealing with outside suppliers and customers. Ability to advise and provide interpretation to others on how to apply policies, procedures and standards to specific situations. Mathematical Ability Ability to add, subtract, multiply, divide, and calculate percentages, fractions and decimals. Knowledge of algebra, basic geometry and basic trigonometry. Technology Ability Proficient in the use of Microsoft Office Suite. Ability to utilize, IBM Maximo, and Oracle computerized system. Judgment and Situational Reasoning Ability Ability to use good personal judgment and discretion in performing all job functions. Read, interpret and apply National Electric Code and other NFPA guidelines in all applications. Physical Requirements Will lift 50 lbs. on a routine basis and 75 lbs. with assistance on an infrequent basis. Must be certified annually to wear respiratory equipment. Must be clean-shaven such that facial hair does not interfere with the fit of self-contained breathing apparatus. Ability to exert moderately heavy physical effort in moderate to heavy work, typically involving some combination of climbing and balancing, stooping, kneeling, crouching, crawling, lifting, carrying, pushing, and pulling. Ability to work at heights of 55 ft. Ability to operate equipment and machinery with some requiring complex and rapid adjustments, such as hand and power tools, facility and truck mounted cranes, forklifts, scaffoldings and man-lifts and test meters associated with the electrical/instrumentation trade. Environmental Adaptability Ability to work under sometimes uncomfortable conditions with exposure to environmental factors such as electricity up to 5 KV, explosive environments, weather, toxic agents, wildlife, disease, equipment, traffic, or machinery. IRWD offers a comprehensive benefits package for eligible employees and their eligible dependents. These benefits include the following: retirement benefits; medical, dental, vision, and life insurance; anda variety of other benefits. Benefits may vary based on employment status. This benefits overview is intended to be a summary, is not intended to be all-inclusive,and may not be applicable to all employees. Retirement Employees hired on or after January 1, 2013: The District, in compliance with the California Public Employees' Pension Reform Act of 2012 (PEPRA), implemented a third tier for new employees hired on or after January 1, 2013. New employees hired on or after January 1, 2013 who have not been in PERS membership or in membership with a reciprocal retirement system within 6 months of hire date will receive benefits under the California Public Employees Retirement System at a 2 percent at age 62 formula. This formula gradually increases to a maximum benefits of 2.5 percent at age 67. Final compensation calculations will be based on the highest three-year average of regular recurring pay. The District pays the employer's share of these costs. The employee share of the pension cost of 7.50% is paid in full by the employees hired under this formula. Employees hired on or after September 29, 2012 or "Classic" PERS members hired on or after January 1, 2013: On September 24, 2012, the IRWD Board of Directors approved the addition of a second tier to the CalPERS retirement benefits. New employees hired on or after September 29th through December 31, 2012, and employees hired on or after January 1, 2013 who have been in PERS membership or in membership with a reciprocal retirement system, will receive benefits under the California Public Employees Retirement System at 2 percent at age 60 formula. This formula gradually increases to a maximum benefit of 2.418% at age 63. The District pays the employer share of these costs and the employee share of the pension cost of 7% is paid in full by the employees hired under this formula. Final retirement compensation calculations are based on the highest three-year average of regular, recurring pay. IRWDdoes not participate or pay into Social Security except for the Medicare portion. Medical Insurance IRWD contracts with CalPERS for medical insurance coverage. Employees may elect coverage from a variety of PPO and HMO plans. The employee and District contribution for health insurance varies by plan.Coverage is effective the first day of the month following the date of hire. Dental Insurance IRWD contracts with Delta Dental for dental coverage.IRWD pays 100% of the premium for dental coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Vision Insurance IRWD contracts with the EyeMed for vision coverage. IRWD pays 100% of the premium for vision coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Life Insurance Elgible employees are provided with life insurance coverage equal to three or four times their annual salary, depending on their level of compensation. Eligible dependents are also covered for a flat benefit amount. Coverage is effective the first day of the month following the date of hire. Deferred Compensation Participation in adeferred compensation plan is available through Empower Retirement. Enrollment is voluntary and contributions are employee-paid and subject to IRS limits. The District matches employee contributions up to 3% of base pay after 1 year of employment. Paid Vacation Eligible employees begin accruing vacation benefits at the rate of 80 hours per year for the first 5 years of employment and are eligible to use paid vacation time after 6 months of employment. Employees accrue 120 hours per year after 5 years of employment and 160 hours per year after 10 years of employment. Paid Holidays The District offers 11 scheduled paid holidaysplus one personal holiday per year. Sick Leave Eligible employees accrue 96 hours of sick leave annually. Flexible Spending Accounts Eligible employees may elect to participate in the District's Flex Advantage program. This program allows employees to deposit pre-tax dollars into special accounts to be used for a variety of purposes, including paying for qualified miscellaneous health care expenses and dependent care expenses. IRWD contracts with a third party administer to process payments from employee accounts using claim forms or a Flex Spending debit card. Educational Assistance The District will share in the pre-approved educational costs of tuition and books for employees who wish to attend college or take certification classes. Closing Date/Time: Continuous
City of Portland, Oregon
Portland, Oregon, United States
The Position Job Appointment: Full-Time Work Schedule: Monday - Friday, 8 am-5 pm. An alternate schedule may be available. Work Location: 5001 N COLUMBIA BLVD, PORTLAND OR 97203-2098 Benefits: Please check our benefit tab for an overview of benefits for this position. Union Representation: District Council of Trade Unions (DCTU). To view labor agreements, current and future, please visit the Current City Labor Agreements page. Language Pay Premium Eligible: This position may be eligible for Language Pay Differential for qualifying employees. Application Material: Please click APPLY to submit your application via the City of Portland’s online portal. You will need to attach a resume and cover letter. About the Position: The City of Portland Bureau of Environmental Services (BES) Operations & Maintenance Group (O&MG) A core aspect of the Bureau of Environmental Services’ work is in operating and maintaining the sewer piping network and treatment system to meet NPDES Permit compliance. Within the Operations and Maintenance Group Wastewater Pumping and Treatment Maintenance Division, this critical work includes installing, maintaining and repairing mechanical, electrical, automation, and instrumentation equipment at two large, complex wastewater treatment plants, 98 pump stations located throughout the City as well as the combined sewer overflow system. Instrument Techs operate at a journeyman level to safely install, maintain, document and repair electrical instrument systems. Cost-effective decisions regarding proper equipment installation, troubleshooting and modifications required are common and are key elements to the success of the technician’s ability to meet project schedules and keep process areas functioning as designed. Process areas must be operational in order to meet the City's discharge permit requirements. Instrument Tech duties include performing preventive and predictive maintenance on various types of instrumentation system to maintain reliability and meet permit requirements. To meet facility operational requirements, they install new equipment, respond to issues, troubleshoot and repair a variety of industrial instruments and precision process control systems. In addition, they participate in a call-out duty rotation for after-hours response. BES encourages applications from candidates with knowledge, ability and experience working with a broad range of individuals and communities with diverse racial, ethnic and socio-economic backgrounds. What y ou’ll get to do: Sets up, installs, repairs, and calibrates various analytical, instrumentation, controls, and communication equipment; interprets and works from plans and/or develops sketches or designs for work, as appropriate. Performs a variety of programming, diagnostic, analytical, and documentation work involving programmable controllers and graphical-user (human-machine) interfaces for a variety of equipment, including but not limited to programmable logic controllers (PLCs), control panels, communication panels, distributed control systems, and pneumatic/hydraulic/instrumentation panels; research information as necessary to perform duties and maintain currency. Maintains existing process measurement and control instrumentation equipment and systems and related transmitting equipment and systems to ensure proper operation and service; performs preventive maintenance, service and repairs; inspects and tests equipment and systems; locates, reviews, reformats, converts and downloads existing control system programs; reconfigures the programs to accommodate system upgrades and other environmental changes; documents work. Designs, upgrades, installs, connects and tests new and repaired control and monitoring systems. Creates supporting documentation, i.e. P&IDs, loop drawings per ISA Standards. Creates new program database reports; downloads and manipulates data using standard office suite and drawing software. Reviews designs and the work of contractors to ensure safety and compliance with specifications and standards, evaluates and assesses the safety, operability, and condition of systems; ensures that repairs and installations operate properly. Maintains records, supplies and equipment; determines materials needed. Works with others to ensure quality customer service. As assigned, may train, guide and lead the work of others. Is responsible for appropriate safety precautions, i.e. lockout tagout, confined space entry. May be required to provide work review when acting as a lead. Designs, fabricates (exclusive of welding), installs and/or retrofits instrument stands, brackets, supports and panels that are intended for instruments, and related equipment. Designs, fabricates, installs and/or retrofits piping and tubing intended for but not restricted to instrument air, sample analysis, instrument hydraulics, signal/control, stilling wells, and related instrument systems. Performs related duties as assigned. About the Bureau of Environmental Services This is an exciting time to join the Bureau of Environmental Services (BES). Collectively we are re-imagining the work we do to ensure it aligns with Our Values: We implement equity in our workplace, business practices, and service delivery. We value our customers and partners. We carefully manage our watersheds, wastewater and stormwater infrastructure, and financial resources. We encourage leadership among our employees in our City and community. We support a diverse, collaborative, healthy, and engaged workforce. We urge respectful communication and transparency. We advance innovative, sustainable, and resilient solutions. At BES, we value our customers and partners; Portlanders’ sense of connection to their waterways; conscientious stewardship of our watersheds, wastewater and stormwater infrastructure, and financial resources; a diverse, collaborative, healthy, and engaged workforce; leadership among our employees and in our City and community; equity in our workplace, business practices, and service delivery; clear communication and transparency; innovative, sustainable, and resilient solutions. BES is seeking talented individuals from diverse racial, ethnic, and socio-economic backgrounds with knowledge, ability, and experience working with a broad range of individuals and communities; and that desire to work collaboratively and creatively to broaden the variety of innovative ways to partner with and serve all Portland communities. To learn more about the work we do at BES, click on the link: www.portlandoregon.gov/bes/ Our BES 10-Year Strategic Plan can be found here: https://www.portlandoregon.gov/bes/75720 Questions?: Terrol Johnson Senior Recruiter terrol.johnson@portlandoregon.gov To Qualify Applicants should specifically address and demonstrate in their cover letter and resume how their education, training, and/or experience meet each of the following minimum qualifications: Knowledge of tools, materials, processes, and techniques of precision instruments, process control equipment, and electronics including troubleshooting techniques.Skill in repairing, troubleshooting, maintaining, modifying, and installing precision instruments and process control equipment; maintaining, developing, and troubleshooting networking as well as other electronic equipment, electronics, and communications devices. Although not required, please also include experience with SCADA systems.Ability to perform layout and sketch designs for process control installations, modifications, and repairs.Ability to communicate effectively and establish and maintain effective working relationships and work constructively as part of a team and independently. Applicants must also possess: A State of Oregon Limited Maintenance Electrical license within six months of the time of hire. (A higher level/broader electrical license may be substituted) A valid state driver's license and acceptable driving record at the time of hire. The Recruitment Process STEP 1: Apply online between March 4 , 2024 - Open Continuous Required Application Materials: Resume Cover Letter Optional Application Materials: Veteran documents to request for Veteran Preference (ex, DD214-Member 4, VA Benefit Letter, etc.) Application Tips: Your cover letter should include details describing your education, training and/or experience, and where obtained, which clearly reflects your qualifications for each of the numbered items in the "To Qualify" section of this announcement. Your resume should support the details described in your cover letter. Salary Range/Equity Pay Analysis : Please note per the Oregon State Pay Equity Law your salary is determined based on the experience and education listed in your resume/application. It is strongly encouraged to include any transferable experience (paid or unpaid regardless of how recent) to ensure your offer is reflective of all directly related and equivalent experience. Do not attach materials not requested. All completed applications for this position must be submitted no later than on the closing date and time of this recruitment. All applications must be submitted via the City's online application process. E-mailed and/or faxed applications will not be accepted. Step 2: Minimum Qualification Evaluation: Week of April 1, 2024 An evaluation of each applicant's training and paid and unpaid experience, as demonstrated in their resume and cover letter, weighted 100%. Your resume and cover letter will be the basis for our evaluation of your qualifications for this position. Incomplete or inappropriate information may result in disqualification. You have 14 days from the notice of the minimum qualification evaluation results to let us know if you like to review and discuss your evaluation result. Please read the City of Portland Administrative Rule 3.01 for complete information. Additional evaluation may be required prior to the establishment of the eligible list and/or final selection. Step 3: Establishment of Eligible List: Week of April 8, 2024 Candidates who meet the minimum qualifications will be placed on the equally ranked eligible list. Step 4: Selection (Interview): TBD The hiring bureau will review and select candidates to interview. Please note, that the selection process may take up to 90 days from the notification of being placed on the eligible list. Step 5: Offer of Employment: TBD Step 6: Start Date: TBD A start date will be determined after all conditions of employment have been met. *Timeline is approximate and subject to change* Additional Information Click here for additional information regarding the following: City of Portland Core Values Recruitment Process - Work Status Equal Employment Opportunity Veteran Preference ADA, Pregnancy, and Religious Accommodations An Equal Opportunity / Affirmative Action Employer A Career with the City of Portland offers many Employee Benefits We offer a comprehensive benefits package, including but not limited to Health Care (Medical, Vision and Dental) Carrot Fertility Wellness Benefits Life Insurance Short- and Long-term disability coverage to eligible employees and their families. Employee Assistance Plan Flexible Spending Accounts Retirement Oregon Public Employees Retirement System (PERS), including contributions to the PERS IAP plan paid by employer Family Medical Leave City Paid Parental Leave AND SO MANY MORE! Benefits may vary depending on bargaining unit and employment status. Click here to review the many different benefits the City of Portland offers . Closing Date/Time: 6/3/2024 11:59 PM Pacific
Mar 12, 2024
Full Time
The Position Job Appointment: Full-Time Work Schedule: Monday - Friday, 8 am-5 pm. An alternate schedule may be available. Work Location: 5001 N COLUMBIA BLVD, PORTLAND OR 97203-2098 Benefits: Please check our benefit tab for an overview of benefits for this position. Union Representation: District Council of Trade Unions (DCTU). To view labor agreements, current and future, please visit the Current City Labor Agreements page. Language Pay Premium Eligible: This position may be eligible for Language Pay Differential for qualifying employees. Application Material: Please click APPLY to submit your application via the City of Portland’s online portal. You will need to attach a resume and cover letter. About the Position: The City of Portland Bureau of Environmental Services (BES) Operations & Maintenance Group (O&MG) A core aspect of the Bureau of Environmental Services’ work is in operating and maintaining the sewer piping network and treatment system to meet NPDES Permit compliance. Within the Operations and Maintenance Group Wastewater Pumping and Treatment Maintenance Division, this critical work includes installing, maintaining and repairing mechanical, electrical, automation, and instrumentation equipment at two large, complex wastewater treatment plants, 98 pump stations located throughout the City as well as the combined sewer overflow system. Instrument Techs operate at a journeyman level to safely install, maintain, document and repair electrical instrument systems. Cost-effective decisions regarding proper equipment installation, troubleshooting and modifications required are common and are key elements to the success of the technician’s ability to meet project schedules and keep process areas functioning as designed. Process areas must be operational in order to meet the City's discharge permit requirements. Instrument Tech duties include performing preventive and predictive maintenance on various types of instrumentation system to maintain reliability and meet permit requirements. To meet facility operational requirements, they install new equipment, respond to issues, troubleshoot and repair a variety of industrial instruments and precision process control systems. In addition, they participate in a call-out duty rotation for after-hours response. BES encourages applications from candidates with knowledge, ability and experience working with a broad range of individuals and communities with diverse racial, ethnic and socio-economic backgrounds. What y ou’ll get to do: Sets up, installs, repairs, and calibrates various analytical, instrumentation, controls, and communication equipment; interprets and works from plans and/or develops sketches or designs for work, as appropriate. Performs a variety of programming, diagnostic, analytical, and documentation work involving programmable controllers and graphical-user (human-machine) interfaces for a variety of equipment, including but not limited to programmable logic controllers (PLCs), control panels, communication panels, distributed control systems, and pneumatic/hydraulic/instrumentation panels; research information as necessary to perform duties and maintain currency. Maintains existing process measurement and control instrumentation equipment and systems and related transmitting equipment and systems to ensure proper operation and service; performs preventive maintenance, service and repairs; inspects and tests equipment and systems; locates, reviews, reformats, converts and downloads existing control system programs; reconfigures the programs to accommodate system upgrades and other environmental changes; documents work. Designs, upgrades, installs, connects and tests new and repaired control and monitoring systems. Creates supporting documentation, i.e. P&IDs, loop drawings per ISA Standards. Creates new program database reports; downloads and manipulates data using standard office suite and drawing software. Reviews designs and the work of contractors to ensure safety and compliance with specifications and standards, evaluates and assesses the safety, operability, and condition of systems; ensures that repairs and installations operate properly. Maintains records, supplies and equipment; determines materials needed. Works with others to ensure quality customer service. As assigned, may train, guide and lead the work of others. Is responsible for appropriate safety precautions, i.e. lockout tagout, confined space entry. May be required to provide work review when acting as a lead. Designs, fabricates (exclusive of welding), installs and/or retrofits instrument stands, brackets, supports and panels that are intended for instruments, and related equipment. Designs, fabricates, installs and/or retrofits piping and tubing intended for but not restricted to instrument air, sample analysis, instrument hydraulics, signal/control, stilling wells, and related instrument systems. Performs related duties as assigned. About the Bureau of Environmental Services This is an exciting time to join the Bureau of Environmental Services (BES). Collectively we are re-imagining the work we do to ensure it aligns with Our Values: We implement equity in our workplace, business practices, and service delivery. We value our customers and partners. We carefully manage our watersheds, wastewater and stormwater infrastructure, and financial resources. We encourage leadership among our employees in our City and community. We support a diverse, collaborative, healthy, and engaged workforce. We urge respectful communication and transparency. We advance innovative, sustainable, and resilient solutions. At BES, we value our customers and partners; Portlanders’ sense of connection to their waterways; conscientious stewardship of our watersheds, wastewater and stormwater infrastructure, and financial resources; a diverse, collaborative, healthy, and engaged workforce; leadership among our employees and in our City and community; equity in our workplace, business practices, and service delivery; clear communication and transparency; innovative, sustainable, and resilient solutions. BES is seeking talented individuals from diverse racial, ethnic, and socio-economic backgrounds with knowledge, ability, and experience working with a broad range of individuals and communities; and that desire to work collaboratively and creatively to broaden the variety of innovative ways to partner with and serve all Portland communities. To learn more about the work we do at BES, click on the link: www.portlandoregon.gov/bes/ Our BES 10-Year Strategic Plan can be found here: https://www.portlandoregon.gov/bes/75720 Questions?: Terrol Johnson Senior Recruiter terrol.johnson@portlandoregon.gov To Qualify Applicants should specifically address and demonstrate in their cover letter and resume how their education, training, and/or experience meet each of the following minimum qualifications: Knowledge of tools, materials, processes, and techniques of precision instruments, process control equipment, and electronics including troubleshooting techniques.Skill in repairing, troubleshooting, maintaining, modifying, and installing precision instruments and process control equipment; maintaining, developing, and troubleshooting networking as well as other electronic equipment, electronics, and communications devices. Although not required, please also include experience with SCADA systems.Ability to perform layout and sketch designs for process control installations, modifications, and repairs.Ability to communicate effectively and establish and maintain effective working relationships and work constructively as part of a team and independently. Applicants must also possess: A State of Oregon Limited Maintenance Electrical license within six months of the time of hire. (A higher level/broader electrical license may be substituted) A valid state driver's license and acceptable driving record at the time of hire. The Recruitment Process STEP 1: Apply online between March 4 , 2024 - Open Continuous Required Application Materials: Resume Cover Letter Optional Application Materials: Veteran documents to request for Veteran Preference (ex, DD214-Member 4, VA Benefit Letter, etc.) Application Tips: Your cover letter should include details describing your education, training and/or experience, and where obtained, which clearly reflects your qualifications for each of the numbered items in the "To Qualify" section of this announcement. Your resume should support the details described in your cover letter. Salary Range/Equity Pay Analysis : Please note per the Oregon State Pay Equity Law your salary is determined based on the experience and education listed in your resume/application. It is strongly encouraged to include any transferable experience (paid or unpaid regardless of how recent) to ensure your offer is reflective of all directly related and equivalent experience. Do not attach materials not requested. All completed applications for this position must be submitted no later than on the closing date and time of this recruitment. All applications must be submitted via the City's online application process. E-mailed and/or faxed applications will not be accepted. Step 2: Minimum Qualification Evaluation: Week of April 1, 2024 An evaluation of each applicant's training and paid and unpaid experience, as demonstrated in their resume and cover letter, weighted 100%. Your resume and cover letter will be the basis for our evaluation of your qualifications for this position. Incomplete or inappropriate information may result in disqualification. You have 14 days from the notice of the minimum qualification evaluation results to let us know if you like to review and discuss your evaluation result. Please read the City of Portland Administrative Rule 3.01 for complete information. Additional evaluation may be required prior to the establishment of the eligible list and/or final selection. Step 3: Establishment of Eligible List: Week of April 8, 2024 Candidates who meet the minimum qualifications will be placed on the equally ranked eligible list. Step 4: Selection (Interview): TBD The hiring bureau will review and select candidates to interview. Please note, that the selection process may take up to 90 days from the notification of being placed on the eligible list. Step 5: Offer of Employment: TBD Step 6: Start Date: TBD A start date will be determined after all conditions of employment have been met. *Timeline is approximate and subject to change* Additional Information Click here for additional information regarding the following: City of Portland Core Values Recruitment Process - Work Status Equal Employment Opportunity Veteran Preference ADA, Pregnancy, and Religious Accommodations An Equal Opportunity / Affirmative Action Employer A Career with the City of Portland offers many Employee Benefits We offer a comprehensive benefits package, including but not limited to Health Care (Medical, Vision and Dental) Carrot Fertility Wellness Benefits Life Insurance Short- and Long-term disability coverage to eligible employees and their families. Employee Assistance Plan Flexible Spending Accounts Retirement Oregon Public Employees Retirement System (PERS), including contributions to the PERS IAP plan paid by employer Family Medical Leave City Paid Parental Leave AND SO MANY MORE! Benefits may vary depending on bargaining unit and employment status. Click here to review the many different benefits the City of Portland offers . Closing Date/Time: 6/3/2024 11:59 PM Pacific
LA County Sanitation District
Valencia (WRP), California, United States
JOB POSTING The Sanitation Districts clean the wastewater of over 5 million people and turn it into resources 24 hours a day, 7 days a week, 365 days a year. Through the operation of 11 wastewater treatment facilities, approximately 510 million gallons per day (MGD) of wastewater are treated at these facilities and 165 MGD are available for reuse. The Santa Clarita Valley Sanitation District operates the Saugus and Valencia WRPs which serve over 140,000 residents of the City of Santa Clarita and the surrounding unincorporated County areas of Stevenson Ranch and Castaic. We are now recruiting for skilled Electrical and Instrumentation Technicians at our Valencia Water Reclamation Plant . The essential functions of this position are to perform progressively more skilled work in the installation, maintenance, and repair of instrumentation, computer process control, and electrical equipment and systems. Working hours are Monday through Friday (7:00am-3:30pm). After hour, overtime, and weekend callbacks will sometimes be required with compensation. This is an excellent career opportunity, with comprehensive benefits including medical, dental, retirement, along with paid vacation, sick leave and holidays. Additional benefit information can be viewed by clicking on the Benefits tab. Initial salary placement will be based on the selected candidate's qualifications. JOB SUMMARY: Under the general supervision of a Supervisor of Electrical and Instrumentation Repair, incumbents assemble, install, maintain, calibrate, troubleshoot and repair and/or replace electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; operate, maintain, calibrate and repair pneumatic and electronic testing and measuring instruments; maintain records and prepare reports on maintenance and repair work, calibration readings and related data; order parts, supplies and equipment; instruct lower level classes in the series; read, interpret and prepare schematic diagrams, blueprints, sketches and equipment specifications; perform math calculations related to the trades; drive to and perform inspections on new construction; maintain shop area; and perform related duties as required. MINIMUM QUALIFICATIONS All candidates must possess a valid California Class C driver license -AND- four years of Electrical & Instrumentation Technician experience performing progressively responsible installation, maintenance and repair work on instrumentation, computer process control and electrical equipment and systems. Twelve units of college course work or completion of one year of a two-year degree or certification program in instrumentation, electronics or electrical technology, or a closely related field may substitute for one year of the required experience -OR- Completion of a two-year degree or certification program in instrumentation, electronics or electrical technology, or a closely related field for two years of the required experience. EXAMPLES OF ASSESSMENT CRITERIA The competitive selection process may cover a Knowledge of: Theories, principles, practices, tools, math formulas and safety considerations used in the installation, maintenance and repair of electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; plant operational systems. The Ability to: Utilize specialized tools, math formulas and equipment of the trade; independently troubleshoot and repair electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; read, interpret and prepare schematic diagrams, blueprints, sketches and equipment specifications; maintain records and prepare reports; independently perform difficult assignments; instruct lower level apprentices in trade techniques. ADDITIONAL INFORMATION SELECTION PROCESS: All applications will be reviewed to determine if the conditions and qualifications for testing are met. The selection process will consist of a written test weighted at 50% and/or an interview weighted at 50%. Candidates must receive a qualifying score on each selection component to move forward in the selection process. Please apply online at www.lacsd.org within the application period. Resumes will not be accepted in lieu of a completed LACSD Employment application. Check your e-mail regularly throughout the recruitment process as notifications are sent via e-mail. Please make sure that your registered e-mail address is accurate and current. To ensure proper delivery add info@governmentjobs.com to your contact list. NOTE: The individual(s) recommended for hire must undergo a job-related pre-employment physical, as well as a reference check, background, check, DMV report, and a drug test. To learn more about how the Sanitation Districts convert waste into resources, please visit the following video: Converting Waste into Resources . For more information regarding this recruitment, please contact Luz Avila at lavila@lacsd.org or (562) 908-4288 extension 1329. As an equal opportunity employer, the Districts strongly encourage people with disabilities and people from historically marginalized communities to apply. RETIREMENT CALPERS: The Districts belong to the California Public Employees' Retirement System (CalPERS), and all monthly status new hires will be enrolled in CalPERS. Most new hires will be enrolled in the defined benefit formula of 2% @ 62 in accordance with the Public Employees’ Pension Reform Act (PEPRA) and are required to contribute to the plan (7.75% for the 23/24 fiscal year). Those who qualify based on current or previous public service may be enrolled in the defined benefit formula in place on December 31, 2012, which was 2% @ 55 and are considered “classic” members. For “classic” members, the Districts pay the “employee share.” Please contact the Human Resources Department for more information regarding contribution rates. Although Districts employees are exempt from Social Security, employees are required by federal law to contribute a percentage of their salary for Medicare coverage. DEFERRED COMP MATCH: For some bargaining units, the Districts provides a matching contribution to an eligible deferred compensation plan pursuant to Section 457 of the Internal Revenue Code. The match with each paycheck will be the lesser of: 3% of the employee's base monthly salary as listed in the Salary Schedule; and the amount the employee is contributing with that paycheck. The annual total combined employee and employer contribution are subject to IRS limits. COMPENSATION Employees receive annual salary increases until reaching step 5 of the salary range and are provided with opportunities to promote. Cost of living adjustments are implemented annually in accordance with labor agreements. HEALTH INSURANCE MEDICAL: Districts paid. Employees may choose from several HMO and Indemnity plans. As of January 1, 2024, the Districts contribute $2,202.87 per month for medical insurance. Depending on the choice of health plan, the Districts contribution covers all or a large portion of the premium for family coverage. DENTAL: Districts paid. The Districts pay the full premium for employee and dependent coverage for a prepaid dental program which provides for most routine dental care through a panel of contracting dentists with no deductibles. Employees are eligible to enroll in an indemnity plan if requested within thirty days after completion of three years of employment (sooner for some bargaining units), or during subsequent open enrollment periods. VISION: Employee paid. LIFE: The Districts pay for a term life policy. Employees can buy additional types and amounts of life insurance coverage at group rates. LEAVE TIME VACATION: Employees receive 88 hours of paid vacation after one full year of service, increasing up to 128 hours per year after five years, 168 hours per year after 15 years and up to 208 hours after 25 years. Prior to one year of full service, employees are given partial vacation time on January 1, based on the time worked in the preceding year. SICK LEAVE : Eight hours of full-pay sick leave per month. PERSONAL LEAVE: Employees may use up to 24 hours per calendar year from current sick leave for personal reasons. Some bargaining units allow up to 40 hours per calendar year from current sick leave for personal reasons. HOLIDAYS 13 paid holidays and one-half paid holiday depending on the employee's work schedule. TUITION REIMBURSEMENT Employees may be eligible for tuition reimbursement for approved accredited course work. STUDENT LOAN PAYMENT REIMBURSEMENT For some bargaining units, the Districts will provide student loan payment reimbursements for principal or interest paid by the employee on a qualified education loan incurred by the employee for the education of the employee. The annual maximum reimbursement is $5,250 and the lifetime reimbursement limit is $21,000. WORK ENVIRONMENT & OTHER BENEFITS A rewarding career contributing to society and the environment. Flexible work schedules (e.g. 9/80 schedule) depending on the worksite. Clear policies and procedures. Health and safety programs. Carpool opportunities with monetary incentives depending on the worksite. More detailed benefits information can be found here: Districts Benefits NOTE: The provisions of this posting do not constitute an expressed or implied contract. Any provision contained in this posting may be modified and/or revoked without notice. Updated December 29, 2023 Closing Date/Time: Continuous
Mar 21, 2024
Full Time
JOB POSTING The Sanitation Districts clean the wastewater of over 5 million people and turn it into resources 24 hours a day, 7 days a week, 365 days a year. Through the operation of 11 wastewater treatment facilities, approximately 510 million gallons per day (MGD) of wastewater are treated at these facilities and 165 MGD are available for reuse. The Santa Clarita Valley Sanitation District operates the Saugus and Valencia WRPs which serve over 140,000 residents of the City of Santa Clarita and the surrounding unincorporated County areas of Stevenson Ranch and Castaic. We are now recruiting for skilled Electrical and Instrumentation Technicians at our Valencia Water Reclamation Plant . The essential functions of this position are to perform progressively more skilled work in the installation, maintenance, and repair of instrumentation, computer process control, and electrical equipment and systems. Working hours are Monday through Friday (7:00am-3:30pm). After hour, overtime, and weekend callbacks will sometimes be required with compensation. This is an excellent career opportunity, with comprehensive benefits including medical, dental, retirement, along with paid vacation, sick leave and holidays. Additional benefit information can be viewed by clicking on the Benefits tab. Initial salary placement will be based on the selected candidate's qualifications. JOB SUMMARY: Under the general supervision of a Supervisor of Electrical and Instrumentation Repair, incumbents assemble, install, maintain, calibrate, troubleshoot and repair and/or replace electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; operate, maintain, calibrate and repair pneumatic and electronic testing and measuring instruments; maintain records and prepare reports on maintenance and repair work, calibration readings and related data; order parts, supplies and equipment; instruct lower level classes in the series; read, interpret and prepare schematic diagrams, blueprints, sketches and equipment specifications; perform math calculations related to the trades; drive to and perform inspections on new construction; maintain shop area; and perform related duties as required. MINIMUM QUALIFICATIONS All candidates must possess a valid California Class C driver license -AND- four years of Electrical & Instrumentation Technician experience performing progressively responsible installation, maintenance and repair work on instrumentation, computer process control and electrical equipment and systems. Twelve units of college course work or completion of one year of a two-year degree or certification program in instrumentation, electronics or electrical technology, or a closely related field may substitute for one year of the required experience -OR- Completion of a two-year degree or certification program in instrumentation, electronics or electrical technology, or a closely related field for two years of the required experience. EXAMPLES OF ASSESSMENT CRITERIA The competitive selection process may cover a Knowledge of: Theories, principles, practices, tools, math formulas and safety considerations used in the installation, maintenance and repair of electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; plant operational systems. The Ability to: Utilize specialized tools, math formulas and equipment of the trade; independently troubleshoot and repair electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; read, interpret and prepare schematic diagrams, blueprints, sketches and equipment specifications; maintain records and prepare reports; independently perform difficult assignments; instruct lower level apprentices in trade techniques. ADDITIONAL INFORMATION SELECTION PROCESS: All applications will be reviewed to determine if the conditions and qualifications for testing are met. The selection process will consist of a written test weighted at 50% and/or an interview weighted at 50%. Candidates must receive a qualifying score on each selection component to move forward in the selection process. Please apply online at www.lacsd.org within the application period. Resumes will not be accepted in lieu of a completed LACSD Employment application. Check your e-mail regularly throughout the recruitment process as notifications are sent via e-mail. Please make sure that your registered e-mail address is accurate and current. To ensure proper delivery add info@governmentjobs.com to your contact list. NOTE: The individual(s) recommended for hire must undergo a job-related pre-employment physical, as well as a reference check, background, check, DMV report, and a drug test. To learn more about how the Sanitation Districts convert waste into resources, please visit the following video: Converting Waste into Resources . For more information regarding this recruitment, please contact Luz Avila at lavila@lacsd.org or (562) 908-4288 extension 1329. As an equal opportunity employer, the Districts strongly encourage people with disabilities and people from historically marginalized communities to apply. RETIREMENT CALPERS: The Districts belong to the California Public Employees' Retirement System (CalPERS), and all monthly status new hires will be enrolled in CalPERS. Most new hires will be enrolled in the defined benefit formula of 2% @ 62 in accordance with the Public Employees’ Pension Reform Act (PEPRA) and are required to contribute to the plan (7.75% for the 23/24 fiscal year). Those who qualify based on current or previous public service may be enrolled in the defined benefit formula in place on December 31, 2012, which was 2% @ 55 and are considered “classic” members. For “classic” members, the Districts pay the “employee share.” Please contact the Human Resources Department for more information regarding contribution rates. Although Districts employees are exempt from Social Security, employees are required by federal law to contribute a percentage of their salary for Medicare coverage. DEFERRED COMP MATCH: For some bargaining units, the Districts provides a matching contribution to an eligible deferred compensation plan pursuant to Section 457 of the Internal Revenue Code. The match with each paycheck will be the lesser of: 3% of the employee's base monthly salary as listed in the Salary Schedule; and the amount the employee is contributing with that paycheck. The annual total combined employee and employer contribution are subject to IRS limits. COMPENSATION Employees receive annual salary increases until reaching step 5 of the salary range and are provided with opportunities to promote. Cost of living adjustments are implemented annually in accordance with labor agreements. HEALTH INSURANCE MEDICAL: Districts paid. Employees may choose from several HMO and Indemnity plans. As of January 1, 2024, the Districts contribute $2,202.87 per month for medical insurance. Depending on the choice of health plan, the Districts contribution covers all or a large portion of the premium for family coverage. DENTAL: Districts paid. The Districts pay the full premium for employee and dependent coverage for a prepaid dental program which provides for most routine dental care through a panel of contracting dentists with no deductibles. Employees are eligible to enroll in an indemnity plan if requested within thirty days after completion of three years of employment (sooner for some bargaining units), or during subsequent open enrollment periods. VISION: Employee paid. LIFE: The Districts pay for a term life policy. Employees can buy additional types and amounts of life insurance coverage at group rates. LEAVE TIME VACATION: Employees receive 88 hours of paid vacation after one full year of service, increasing up to 128 hours per year after five years, 168 hours per year after 15 years and up to 208 hours after 25 years. Prior to one year of full service, employees are given partial vacation time on January 1, based on the time worked in the preceding year. SICK LEAVE : Eight hours of full-pay sick leave per month. PERSONAL LEAVE: Employees may use up to 24 hours per calendar year from current sick leave for personal reasons. Some bargaining units allow up to 40 hours per calendar year from current sick leave for personal reasons. HOLIDAYS 13 paid holidays and one-half paid holiday depending on the employee's work schedule. TUITION REIMBURSEMENT Employees may be eligible for tuition reimbursement for approved accredited course work. STUDENT LOAN PAYMENT REIMBURSEMENT For some bargaining units, the Districts will provide student loan payment reimbursements for principal or interest paid by the employee on a qualified education loan incurred by the employee for the education of the employee. The annual maximum reimbursement is $5,250 and the lifetime reimbursement limit is $21,000. WORK ENVIRONMENT & OTHER BENEFITS A rewarding career contributing to society and the environment. Flexible work schedules (e.g. 9/80 schedule) depending on the worksite. Clear policies and procedures. Health and safety programs. Carpool opportunities with monetary incentives depending on the worksite. More detailed benefits information can be found here: Districts Benefits NOTE: The provisions of this posting do not constitute an expressed or implied contract. Any provision contained in this posting may be modified and/or revoked without notice. Updated December 29, 2023 Closing Date/Time: Continuous
Minimum Qualifications Electronics Technician I Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent, plus two (2) years experience in repair and maintenance of electronics such as communications, computer and peripheral or control and instrumentation equipment. Twelve (12) semester hours of college credit in electronics, communications technology, engineering technology, computer science or related field may substitute for one year of the required experience with a maximum substitution of two (2) years. Licenses and Certifications Required: None. Electronics Technician II Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent plus three (3) years experience in repair and maintenance of electronics such as communications, computer and peripheral or control and instrumentation equipment. Twelve (12) semester hours of college credit in Electronics, Communications Technology, Engineering Technology, Computer Science or related field may substitute for one (1) year of the required experience up to a maximum of two (2) years. Licenses and Certifications Required: None. Notes to Applicants POSITION OVERVIEW : This position performs tasks in the repair, maintenance, and installation of the AUS campus life safety and security systems, to include fire alarm and suppression, fire extinguishers, public address, CCTV , proximity card readers and security doors and hardware. Assist with the review and oversight of security and life safety work that is performed by tenants, contractors, and consultants. Provides assistance and input as the subject matter expert for all AUS construction projects. It installs, troubleshoots and repairs electronic equipment. This position researches and orders electronic components and maintain parts inventory. This position maintains, tests, troubleshoots, repairs, and calibrates various electronic systems and system components. It maintains technical files and associated inspection and discrepancy records for all campus life safety systems. It maintains records of repairs, calibrations and tests. This position tests electronic components and circuits to locate defects, using oscilloscope signal generators, ammeters and voltmeters. ASSESSMENT : A skills assessment will be required for this position. TRAVEL : If you are selected for this position, and meet the Driver Safety Standards in the City of Austin Driver Safety Program, you may drive when necessary to multiple locations as part of your regular job duties. Otherwise, you are responsible for getting to and from these locations. APPLICATION INFORMATION : A detailed and complete employment application is required to help us better evaluate your qualifications and will be used to determine salary if you are selected for this position. Please list your complete employment history, to include all job duties, responsibilities and employment dates on your online application. The application is an official document; incomplete applications will not be considered (i.e., “see resume” or “see LinkedIn profile”). Resumes will not be used to qualify for the position and will not be used to recommend salary. Supplemental information or changes to your application will not be accepted after the job posting closes. The responses to the supplemental questions inquiring about experience should be reflected on your application. VETERAN : Veteran candidates will be required to provide a copy of their DD214 at the time of interview. GOOD STANDING - DEPARTMENT / DIVISION POSTINGS : Employees, in Good Standing, who are candidates within the department/division that the position resides in and who meet the minimum and preferred qualifications (if any) of the position will be included in the initial interview. Department/division employee must remain in Good Standing through the Top Candidate Selection phase at which time the Good Standing status will be re-verified. ESSENTIAL PERSONNEL : This position is categorized as an Essential Personnel. Essential personnel are required to come to work during emergencies or bad weather at the airport if they are scheduled to work and in some cases when they are not scheduled. CRIMINAL HISTORY BACKGROUND CHECK : Top candidate will be subject to a minimum 10 year criminal background check and security threat assessment. LANGUAGE : Must have the ability to read, write, and fluently speak in English. WORK HOURS : Shift may change according to departmental needs. Work hours may include after hours, holidays, and weekend work ON- CALL / CALL BACK RESPONSIBILITIES : Position may require on-call or call back responsibilities. SHIFT INCENTIVE : Shift work includes shift differential incentive for evening and night shifts and weekends. OVERTIME : Overtime may be required with or without notice. DEPARTMENT MAY CLOSE THE JOB POSTING AT ANY TIME AFTER 7 DAYS Pay Range Tech I: $21.78-$24.50 Tech II: $24.56-$28.80 Hours Sun - Wed 3:00 am - 1:30 pm Wed - Sat 3:00 am - 1:30 pm Sun - Wed 2:30 pm - 1:00 am Wed - Sat 2:30 pm - 1:00 am Hours may change depending on departmental needs. Work hours may include after-hours, holidays, and weekend work. Rotational on-call is a requirement for this position. Job Close Date 05/30/2024 Type of Posting External Department Aviation Regular/Temporary Regular Grant Funded or Pooled Position Not Applicable Category Technical Location Austin Bergstrom International Airport (AUS) Preferred Qualifications Preferred Experience: Experience in the repair, testing, programming, and troubleshooting of CCTV , Fire Alarm/Suppression systems, or Access Control. Ability to travel to more than one work location. Duties, Functions and Responsibilities This position is posted at multiple levels. For Duties, Functions and Responsibilities, please select the appropriate job description below. Essential duties and functions, pursuant to the Americans with Disabilities Act, may include the following. Other related duties may be assigned. Electronics Technician I Electronics Technician II Knowledge, Skills and Abilities This position is posted at multiple levels. For Knowledge, Skills and Abilities, please select the appropriate job description below. Must possess required knowledge, skills, abilities, and experience and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed. Electronics Technician I Electronics Technician II Criminal Background Investigation This position has been approved for a Criminal Background Investigation. EEO/ADA City of Austin is committed to compliance with the Americans with Disabilities Act. If you require reasonable accommodation during the application process or have a question regarding an essential job function, please call (512) 974-3210 or Texas Relay by dialing 7-1-1. The City of Austin will not discriminate against any applicant or employee based on race, creed, color, national origin, sex, gender identity, age, religion, veteran status, disability, or sexual orientation. In addition, the City will not discriminate in employment decisions on the basis of an individual’s AIDS , AIDS Related Complex, or HIV status; nor will the City discriminate against individuals who are perceived to be at risk of HIV infection, or who associate with individuals who are believed to be at risk. Information For City Employees: If you are an employee within the department, are in good standing and meet both the minimum and preferred qualifications, then you will receive an initial interview. Supplemental Questions Required fields are indicated with an asterisk (*). * The minimum qualifications of this position are graduation from an accredited high school or equivalent, plus two (2) years experience in repair and maintenance of electronics such as communications, computer and peripheral or control and instrumentation equipment. Twelve (12) semester hours of college credit in electronics, communications technology, engineering technology, computer science or related field may substitute for one year of the required experience with a maximum substitution of two (2) years. Do you meet this requirement? Yes No * How many years of experience do you have in the repair, testing, programing and troubleshooting of CCTV, Fire Alarm/Suppression systems, or Access Control? 0-3 years / Entry 3-5 years / Moderate 5+ years * Do you have the ability to travel to multiple sites as part of the regular job duties? Yes No * The Transportation Security Administration (TSA-division of the USA Dept. of Homeland Security) requires all employees of the Austin-Bergstrom International Airport to pass a minimum 10-year criminal background investigation and security threat assessment. By selecting the following, you are acknowledging that you understand if you are selected as a top candidate for this position, you will need a successful Criminal Background Check to be hired. I acknowledge and understand this position requires a 10-year Criminal Background Investigation and security threat assessment * Were you referred to this opportunity by a current Aviation employee? If yes, please provide the employee’s full name. (Open Ended Question) Optional & Required Documents Required Documents Optional Documents
May 17, 2024
Full Time
Minimum Qualifications Electronics Technician I Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent, plus two (2) years experience in repair and maintenance of electronics such as communications, computer and peripheral or control and instrumentation equipment. Twelve (12) semester hours of college credit in electronics, communications technology, engineering technology, computer science or related field may substitute for one year of the required experience with a maximum substitution of two (2) years. Licenses and Certifications Required: None. Electronics Technician II Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent plus three (3) years experience in repair and maintenance of electronics such as communications, computer and peripheral or control and instrumentation equipment. Twelve (12) semester hours of college credit in Electronics, Communications Technology, Engineering Technology, Computer Science or related field may substitute for one (1) year of the required experience up to a maximum of two (2) years. Licenses and Certifications Required: None. Notes to Applicants POSITION OVERVIEW : This position performs tasks in the repair, maintenance, and installation of the AUS campus life safety and security systems, to include fire alarm and suppression, fire extinguishers, public address, CCTV , proximity card readers and security doors and hardware. Assist with the review and oversight of security and life safety work that is performed by tenants, contractors, and consultants. Provides assistance and input as the subject matter expert for all AUS construction projects. It installs, troubleshoots and repairs electronic equipment. This position researches and orders electronic components and maintain parts inventory. This position maintains, tests, troubleshoots, repairs, and calibrates various electronic systems and system components. It maintains technical files and associated inspection and discrepancy records for all campus life safety systems. It maintains records of repairs, calibrations and tests. This position tests electronic components and circuits to locate defects, using oscilloscope signal generators, ammeters and voltmeters. ASSESSMENT : A skills assessment will be required for this position. TRAVEL : If you are selected for this position, and meet the Driver Safety Standards in the City of Austin Driver Safety Program, you may drive when necessary to multiple locations as part of your regular job duties. Otherwise, you are responsible for getting to and from these locations. APPLICATION INFORMATION : A detailed and complete employment application is required to help us better evaluate your qualifications and will be used to determine salary if you are selected for this position. Please list your complete employment history, to include all job duties, responsibilities and employment dates on your online application. The application is an official document; incomplete applications will not be considered (i.e., “see resume” or “see LinkedIn profile”). Resumes will not be used to qualify for the position and will not be used to recommend salary. Supplemental information or changes to your application will not be accepted after the job posting closes. The responses to the supplemental questions inquiring about experience should be reflected on your application. VETERAN : Veteran candidates will be required to provide a copy of their DD214 at the time of interview. GOOD STANDING - DEPARTMENT / DIVISION POSTINGS : Employees, in Good Standing, who are candidates within the department/division that the position resides in and who meet the minimum and preferred qualifications (if any) of the position will be included in the initial interview. Department/division employee must remain in Good Standing through the Top Candidate Selection phase at which time the Good Standing status will be re-verified. ESSENTIAL PERSONNEL : This position is categorized as an Essential Personnel. Essential personnel are required to come to work during emergencies or bad weather at the airport if they are scheduled to work and in some cases when they are not scheduled. CRIMINAL HISTORY BACKGROUND CHECK : Top candidate will be subject to a minimum 10 year criminal background check and security threat assessment. LANGUAGE : Must have the ability to read, write, and fluently speak in English. WORK HOURS : Shift may change according to departmental needs. Work hours may include after hours, holidays, and weekend work ON- CALL / CALL BACK RESPONSIBILITIES : Position may require on-call or call back responsibilities. SHIFT INCENTIVE : Shift work includes shift differential incentive for evening and night shifts and weekends. OVERTIME : Overtime may be required with or without notice. DEPARTMENT MAY CLOSE THE JOB POSTING AT ANY TIME AFTER 7 DAYS Pay Range Tech I: $21.78-$24.50 Tech II: $24.56-$28.80 Hours Sun - Wed 3:00 am - 1:30 pm Wed - Sat 3:00 am - 1:30 pm Sun - Wed 2:30 pm - 1:00 am Wed - Sat 2:30 pm - 1:00 am Hours may change depending on departmental needs. Work hours may include after-hours, holidays, and weekend work. Rotational on-call is a requirement for this position. Job Close Date 05/30/2024 Type of Posting External Department Aviation Regular/Temporary Regular Grant Funded or Pooled Position Not Applicable Category Technical Location Austin Bergstrom International Airport (AUS) Preferred Qualifications Preferred Experience: Experience in the repair, testing, programming, and troubleshooting of CCTV , Fire Alarm/Suppression systems, or Access Control. Ability to travel to more than one work location. Duties, Functions and Responsibilities This position is posted at multiple levels. For Duties, Functions and Responsibilities, please select the appropriate job description below. Essential duties and functions, pursuant to the Americans with Disabilities Act, may include the following. Other related duties may be assigned. Electronics Technician I Electronics Technician II Knowledge, Skills and Abilities This position is posted at multiple levels. For Knowledge, Skills and Abilities, please select the appropriate job description below. Must possess required knowledge, skills, abilities, and experience and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed. Electronics Technician I Electronics Technician II Criminal Background Investigation This position has been approved for a Criminal Background Investigation. EEO/ADA City of Austin is committed to compliance with the Americans with Disabilities Act. If you require reasonable accommodation during the application process or have a question regarding an essential job function, please call (512) 974-3210 or Texas Relay by dialing 7-1-1. The City of Austin will not discriminate against any applicant or employee based on race, creed, color, national origin, sex, gender identity, age, religion, veteran status, disability, or sexual orientation. In addition, the City will not discriminate in employment decisions on the basis of an individual’s AIDS , AIDS Related Complex, or HIV status; nor will the City discriminate against individuals who are perceived to be at risk of HIV infection, or who associate with individuals who are believed to be at risk. Information For City Employees: If you are an employee within the department, are in good standing and meet both the minimum and preferred qualifications, then you will receive an initial interview. Supplemental Questions Required fields are indicated with an asterisk (*). * The minimum qualifications of this position are graduation from an accredited high school or equivalent, plus two (2) years experience in repair and maintenance of electronics such as communications, computer and peripheral or control and instrumentation equipment. Twelve (12) semester hours of college credit in electronics, communications technology, engineering technology, computer science or related field may substitute for one year of the required experience with a maximum substitution of two (2) years. Do you meet this requirement? Yes No * How many years of experience do you have in the repair, testing, programing and troubleshooting of CCTV, Fire Alarm/Suppression systems, or Access Control? 0-3 years / Entry 3-5 years / Moderate 5+ years * Do you have the ability to travel to multiple sites as part of the regular job duties? Yes No * The Transportation Security Administration (TSA-division of the USA Dept. of Homeland Security) requires all employees of the Austin-Bergstrom International Airport to pass a minimum 10-year criminal background investigation and security threat assessment. By selecting the following, you are acknowledging that you understand if you are selected as a top candidate for this position, you will need a successful Criminal Background Check to be hired. I acknowledge and understand this position requires a 10-year Criminal Background Investigation and security threat assessment * Were you referred to this opportunity by a current Aviation employee? If yes, please provide the employee’s full name. (Open Ended Question) Optional & Required Documents Required Documents Optional Documents
SAN ANTONIO WATER SYSTEM
San Antonio, Texas, United States
Grade 18 - Starting Hourly Rate: $25.9346. Rate of pay depends on qualifications. Job Description JO B SUMMARY The Control Systems Technician is responsible for the maintenance, troubleshooting, calibration, and repair of process control systems. Under the guidance of the instrumentation and controls group the technician shall complete assigned tasks, attends required safety training and follows all safety standards. The technician works as part of the instrument and controls team to meet SAWS’ mission statement. ESSENTIAL FUNCTIONS Maintains, troubleshoots, and navigates Process Logic Controllers (PLCs) for automation systems. Maintains and troubleshoots chemical analysis systems, hazardous chemical distribution, and detection systems. Maintains and troubleshoots fluoride, chlorine, and PH analytical equipment. Maintains and troubleshoots RF radio communication equipment. Demonstrates technical aptitude with low voltage circuits. Assists Senior Control Systems Technicians with data and inventory of field equipment. Assists and supports Senior Control Systems Technicians with internal and external projects, installation of PLC’s, analyzers, flow meters, RF radios, and other process equipment. Performs other duties as assigned. DECISION MAKING The Control Systems Technician works under limited supervision. Coordinates technicians of different trades in order to carry out repair and installation of complex control systems and instrumentation. M INIMUM REQUIREMENTS High School Diploma or GED. Two years’ experience in the maintenance, troubleshooting, calibration, repair and installation of Process Control Systems (SCADA and DCS), or in a related field. Ability to report to work on time, maintain a good attendance record, and work all designated work schedules. Valid Class “C” Texas Driver’s License. PREFERRED QUALIFICATIONS Instrument Society of America Certification. Class “C” Groundwater Texas Water Operator License or Class “C” Texas Wastewater Treatment Operator License. Experience in potable and non-potable water industries. Work order and maintenance management systems experience. JOB DIMENSIONS Skill in using desktop business applications, including Excel, Word, and Access. Ability to work effectively in a team environment and an individual self-directed environment, including coordination with end users, internal and external customers, consultants and vendors. Ability to communicate effectively, verbally and in writing. Ability to work hours other than regular schedule such as days, nights, weekends, holidays, on-call and rotating shifts. Ability to operate a company vehicle on a daily basis. Ability to proficiently utilize laptop computers, multi-meters, and other calibration equipment. PHYSICAL DEMANDS AND WORKING CONDITIONS Physical requirements include visual acuity, color vision, standing, sitting, walking, climbing, bending, crawling, squatting, kneeling and working in cramped and strained positions for long periods of time, and the ability to lift up to 75 pounds. Working conditions are primarily outside with frequent exposure to inclement weather; wastewater; mechanical, electrical, chemical and confined space hazards; offensive fumes; excessive noise; heavy traffic; deep excavations; and animals, snakes and poisonous insects. May be required to comply with requirements as specified in applicable regulations for personal protective equipment, including clearance for use of respiratory protection and other associated equipment. San Antonio Water System values the contributions of all its employees, providing them the best in compensation and benefits. The benefits package is designed to attract and retain a workforce of qualified employees who share a responsibility in providing quality water to 1 million consumers. From an affordable medical and dental plan to life-sustaining retirement and insurance plans, we offer benefits that reward employees for their commitment to a challenging career at SAWS. Employee benefits include the following: Competitive, market-based salaries Performance-based incentives Medical benefits Dental benefits Life insurance Prescription drug program Vision care plan Two retirement plans Deferred compensation plans (457 plan) Disability income Paid leave (vacation, sick, personal) Education assistance program Employee assistance program Flexible, tax-deferred health and dependent care spending accounts Wellness programs On-Site Fitness Facilities Community service opportunities Closing Date/Time: 6/30/2024 11:59 PM Central
May 03, 2024
Full Time
Grade 18 - Starting Hourly Rate: $25.9346. Rate of pay depends on qualifications. Job Description JO B SUMMARY The Control Systems Technician is responsible for the maintenance, troubleshooting, calibration, and repair of process control systems. Under the guidance of the instrumentation and controls group the technician shall complete assigned tasks, attends required safety training and follows all safety standards. The technician works as part of the instrument and controls team to meet SAWS’ mission statement. ESSENTIAL FUNCTIONS Maintains, troubleshoots, and navigates Process Logic Controllers (PLCs) for automation systems. Maintains and troubleshoots chemical analysis systems, hazardous chemical distribution, and detection systems. Maintains and troubleshoots fluoride, chlorine, and PH analytical equipment. Maintains and troubleshoots RF radio communication equipment. Demonstrates technical aptitude with low voltage circuits. Assists Senior Control Systems Technicians with data and inventory of field equipment. Assists and supports Senior Control Systems Technicians with internal and external projects, installation of PLC’s, analyzers, flow meters, RF radios, and other process equipment. Performs other duties as assigned. DECISION MAKING The Control Systems Technician works under limited supervision. Coordinates technicians of different trades in order to carry out repair and installation of complex control systems and instrumentation. M INIMUM REQUIREMENTS High School Diploma or GED. Two years’ experience in the maintenance, troubleshooting, calibration, repair and installation of Process Control Systems (SCADA and DCS), or in a related field. Ability to report to work on time, maintain a good attendance record, and work all designated work schedules. Valid Class “C” Texas Driver’s License. PREFERRED QUALIFICATIONS Instrument Society of America Certification. Class “C” Groundwater Texas Water Operator License or Class “C” Texas Wastewater Treatment Operator License. Experience in potable and non-potable water industries. Work order and maintenance management systems experience. JOB DIMENSIONS Skill in using desktop business applications, including Excel, Word, and Access. Ability to work effectively in a team environment and an individual self-directed environment, including coordination with end users, internal and external customers, consultants and vendors. Ability to communicate effectively, verbally and in writing. Ability to work hours other than regular schedule such as days, nights, weekends, holidays, on-call and rotating shifts. Ability to operate a company vehicle on a daily basis. Ability to proficiently utilize laptop computers, multi-meters, and other calibration equipment. PHYSICAL DEMANDS AND WORKING CONDITIONS Physical requirements include visual acuity, color vision, standing, sitting, walking, climbing, bending, crawling, squatting, kneeling and working in cramped and strained positions for long periods of time, and the ability to lift up to 75 pounds. Working conditions are primarily outside with frequent exposure to inclement weather; wastewater; mechanical, electrical, chemical and confined space hazards; offensive fumes; excessive noise; heavy traffic; deep excavations; and animals, snakes and poisonous insects. May be required to comply with requirements as specified in applicable regulations for personal protective equipment, including clearance for use of respiratory protection and other associated equipment. San Antonio Water System values the contributions of all its employees, providing them the best in compensation and benefits. The benefits package is designed to attract and retain a workforce of qualified employees who share a responsibility in providing quality water to 1 million consumers. From an affordable medical and dental plan to life-sustaining retirement and insurance plans, we offer benefits that reward employees for their commitment to a challenging career at SAWS. Employee benefits include the following: Competitive, market-based salaries Performance-based incentives Medical benefits Dental benefits Life insurance Prescription drug program Vision care plan Two retirement plans Deferred compensation plans (457 plan) Disability income Paid leave (vacation, sick, personal) Education assistance program Employee assistance program Flexible, tax-deferred health and dependent care spending accounts Wellness programs On-Site Fitness Facilities Community service opportunities Closing Date/Time: 6/30/2024 11:59 PM Central
Clark County Water Reclamation District
Las Vegas, NV, United States
ABOUT THE POSITION The Clark County Water Reclamation District is seeking qualified candidates to apply for the WRD Senior Control Systems Technician position. This position will be primarily responsible for: Training and coordinating staff with tasks and work orders based on departmental responsibilities. Working independently and prioritizing assignments based on changing field conditions or process concerns. Strong knowledge of troubleshooting, testing, and repairing electrical power equipment, motor controls (including VFDs), and instrumentation. Reading and interpreting detailed electrical schematics and working with electronics, SCADA, PLCs, electrical ladder diagrams, process and instrumentation drawings (P&IDs), VFDs, telemetry or similar. Timely and concise communication with technical and non-technical staff, salespeople, consultants, contractors, and the public. Click here to view a complete description of the job classification. This recruitment will establish an Open Competitive Eligibility list to fill current and/or future vacancies that may occur within the next six (6) months or may be extended as needed by Human Resources. Human Resources reserves the right to call only the most qualified applicants to the selection process. MINIMUM REQUIREMENTS Education and Experience: Equivalent to graduation from high school and successful completion of a recognized electronics systems training program and five (5) years of full-time progressive skilled experience in the installation, maintenance, malfunction analysis, calibration and repair of industrial instrumentation such as found in water or wastewater plants. Additional experience as outlined above may be substituted for the formal training program on a year for year basis. Attendance at a recognized trade school is desirable, as is experience in an industrial or plant setting. Qualifying education and experience must be clearly documented in the "Education" and "Work Experience" sections of the application. Do not substitute a resume for your application or write "see attached resume" on your application. Working Conditions: Work is subject to performance under adverse environmental conditions. Incumbents may be exposed to oils, lubricants, toxic chemicals and gases during the performance of duties. Work extended shifts or be called back in emergency situations. Subject to shift assignment and on-call status. Licensing and Certification: Must possess a valid Class C Nevada driver's license at time of appointment. Background Investigation: Employment is contingent upon successful completion of a background investigation. Periodically after employment background investigations may be conducted. Medical Examination: Employment is contingent upon the results of a physical examination performed by our examining physician. Pre-Employment Drug Testing: Employment is contingent upon the results of a pre-employment drug examination. EXAMPLES OF DUTIES Click here to view a complete description of the job classification. PHYSICAL DEMANDS Click here to view a complete description of the job classification. Closing Date/Time: 6/4/2024 5:01 PM Pacific
Apr 24, 2024
Full Time
ABOUT THE POSITION The Clark County Water Reclamation District is seeking qualified candidates to apply for the WRD Senior Control Systems Technician position. This position will be primarily responsible for: Training and coordinating staff with tasks and work orders based on departmental responsibilities. Working independently and prioritizing assignments based on changing field conditions or process concerns. Strong knowledge of troubleshooting, testing, and repairing electrical power equipment, motor controls (including VFDs), and instrumentation. Reading and interpreting detailed electrical schematics and working with electronics, SCADA, PLCs, electrical ladder diagrams, process and instrumentation drawings (P&IDs), VFDs, telemetry or similar. Timely and concise communication with technical and non-technical staff, salespeople, consultants, contractors, and the public. Click here to view a complete description of the job classification. This recruitment will establish an Open Competitive Eligibility list to fill current and/or future vacancies that may occur within the next six (6) months or may be extended as needed by Human Resources. Human Resources reserves the right to call only the most qualified applicants to the selection process. MINIMUM REQUIREMENTS Education and Experience: Equivalent to graduation from high school and successful completion of a recognized electronics systems training program and five (5) years of full-time progressive skilled experience in the installation, maintenance, malfunction analysis, calibration and repair of industrial instrumentation such as found in water or wastewater plants. Additional experience as outlined above may be substituted for the formal training program on a year for year basis. Attendance at a recognized trade school is desirable, as is experience in an industrial or plant setting. Qualifying education and experience must be clearly documented in the "Education" and "Work Experience" sections of the application. Do not substitute a resume for your application or write "see attached resume" on your application. Working Conditions: Work is subject to performance under adverse environmental conditions. Incumbents may be exposed to oils, lubricants, toxic chemicals and gases during the performance of duties. Work extended shifts or be called back in emergency situations. Subject to shift assignment and on-call status. Licensing and Certification: Must possess a valid Class C Nevada driver's license at time of appointment. Background Investigation: Employment is contingent upon successful completion of a background investigation. Periodically after employment background investigations may be conducted. Medical Examination: Employment is contingent upon the results of a physical examination performed by our examining physician. Pre-Employment Drug Testing: Employment is contingent upon the results of a pre-employment drug examination. EXAMPLES OF DUTIES Click here to view a complete description of the job classification. PHYSICAL DEMANDS Click here to view a complete description of the job classification. Closing Date/Time: 6/4/2024 5:01 PM Pacific
Water Employee Services Agency (WESA)
Lake Elsinore, CA, US
The Position: Summary: Job descriptions are intended to present a descriptive list of the range of duties performed by employees in this job. Specifications are NOT intended to reflect all duties performed with the job. SUMMARY DESCRIPTION Under minimal direction, performs professional duties relating to installation, preventive and corrective maintenance, inspection and servicing of mechanical equipment, components, machinery and facilities associated with the production, pumping, storage, delivery and treatment of potable, agricultural, reclaimed and wastewater. Ensures compliance with the general waste discharge orders issued by the California Water Quality Board. Performs predictive, preventive and corrective maintenance on a wide variety of pumps, engines and other equipment related to wastewater treatment plants, water treatment plants, wells and booster stations. Obtains, analyzes and inputs to a computerized maintenance management program the preventive or corrective maintenance and repair information for all work performed. Participates in the development of District Safety programs. Operates and maintains a variety of light and heavy equipment as well as hand and power tools. Immediate Impact: The successful candidate will be given the following objectives upon hire: Within the first 3 months, demonstrate familiarity with the preventive and corrective maintenance program framework. This will include navigation of the Computerized Maintenance Management System (CMMS). Within the first 6 months, create and present a 30-45 minute training session on a primary mover equipment repair process of the incumbent’s choice. Within the first 9 months, demonstrate the ability to utilize the purchasing system to create requestions for outside vendors. Within the first 12 months, provide a written assessment as to the status of all the primary mover equipment in the assigned work area, for both water and wastewater, which will include the recommendations for repair, overhaul or replacement. The Ideal Candidate: Plans, leads, trains and reviews the work of staff responsible for the maintenance, troubleshooting, installation and repair of water and wastewater process equipment. Performs highly technical tasks related to diagnosis, overhaul and replacement of complex equipment Plans and coordinates preventive and corrective maintenance program jobs and projects; communicates clearly and concisely, both orally and in writing. Knowledge of occupational safety hazards and safe work practices; operating characteristics of computers and applicable software applications such as SCADA and Computerized Maintenance Management System. Five (5) years of increasingly responsible experience in the maintenance and repair of mechanical equipment used in the distribution, collection, and treatment of water or wastewater systems. Possession of a California Class B driver’s license with air brake and tanker endorsements, to be maintained throughout employment. Possession of a valid Grade II Mechanical Technologist Certificate issued by the California Water Environment Association. Possession of or ability to obtain a valid Grade III Mechanical Technologist Certificate issued by the California Water Environment Association within twelve (12) months of employment. Possession of a valid Water Distribution Operator Grade II (D2) Certificate issued by the California State Water Resources Control Board. Possession of a crane operator certification issued by the National Commission for the Certification of Crane Operators. Responsibilities: The following duties are typical for this classification. Incumbents may not perform all duties and/or may be required to perform additional or different duties from those set forth below to address business needs and changing business practices. Plans, leads and reviews the work of staff responsible for the maintenance, troubleshooting, installation and repair of equipment at the District’s wells, booster stations, water and wastewater treatment plants, and other District facilities. Trains assigned employees to ensure competence in the skills and techniques necessary to repair and maintain District’s mechanical equipment properly and safely. Leads the installation and maintenance of mechanical equipment including pumps, motors, gear boxes, valves, solenoids, mechanical seals, seal fluid filters, bearings, gaskets, air compressors, air blowers and other related equipment. Oversees and participates in troubleshooting, diagnosing and performing corrective action for the District’s mechanical equipment using specialized tools and testing/diagnostic equipment. Plans, coordinates, performs and records repair operations, equipment replacement, new equipment installations and related special projects as directed by supervisor.Maintains records, updates as-built drawings and creates a variety of reports including time, materials, and other costs related to the project. Responsible for preventive/predictive maintenance program functions including the maintenance, repair service and overhaul activities on wells, pumping stations, water/wastewater treatment plants and other equipment related to the production, pumping, storage and delivery of potable, agricultural, reclaimed and wastewater; ensures maximum performance and efficiency of equipment. Understands care and operation of assigned maintenance light and heavy equipment and tools, including service trucks, mobile knuckle crane, dump trucks, forklifts, portable/stationary generators, pressure washers, air compressors, pneumatic, hydraulic and electric tools and other equipment as assigned; sets up and uses rigging equipment to move pumps, motors, and other heavy parts or equipment; uses diagnostic, analytical, and measurement instrumentation/tools. Operates a large knuckle boom crane to install new pumps and motors on booster pumps and wells. Diagnoses well and booster pumping station operation using specialized tools and testing/diagnostic instrumentation; troubleshoots pumps and motors and makes appropriate adjustments and repairs; inspects, maintains and repairs hydraulic and pneumatic systems; installs, modifies, inspects and maintains piping associated with wells and water pumping stations. Assists in maintaining and repairing dam hydraulic gate systems. Reads, understands, interprets and works from blueprints, plans, schematics, diagrams and maps as related to wells, pumping stations, hydraulic control equipment and electrical control systems. Reads and understands electrical schematics. Maintains accurate, up to date records on all maintenance repair and service activity. Defines and enters into a computerized maintenance management program the scheduled maintenance and repair task descriptions on horizontal, centrifugal and deep well type turbine pumps, engines, motors and other mechanical or electrical equipment. Performs mechanical work in the maintenance, repair, overhauling, and/or rebuilding of equipment, components, pumps, valves, electrical motors, and engines associated with and used within municipal water, wastewater and agricultural systems. Performs preventive mechanical maintenance by inspecting and cleaning equipment, changing out lubricating fluids, repacking bearings, adjusting and replacing belts, gear boxes, pistons, filters, valves, gaskets and other related parts. Uses standard and specialized test equipment such as alignment gauges, insulation tester, voltmeter, ammeter, vibration monitoring equipment, infrared thermal imaging camera and other specialized test equipment. Performs corrective maintenance by troubleshooting cause of malfunction using visual inspection and precision measuring and testing instruments and replacing or repairing broken parts such as gauges, gaskets, sensors, switches, bearings, valves, pistons, rings, crankshafts and pumps. Rebuilds equipment by disassembling, cleaning, and repairing mechanical malfunctions; reassembles and tests equipment to ensure that it is in proper working condition. Installs and troubleshoots new electrical and mechanical equipment and tests for proper operation. Orders replacement parts to perform maintenance and repairs as necessary. Maintains inventory of replacement parts and equipment. Uses and manages District-assigned procurement credit card by allocating transactions to proper accounts and submitting receipts with monthly statement to supervisor. Operates and maintains a variety of hand tools, power tools, pneumatic tools, and other equipment in the performance of assigned mechanical duties. Works with other water/wastewater staff and sub-contractors in performing maintenance duties as necessary including electrical and/or mechanical repairs and maintenance. Performs field inventories and verifies equipment nameplate data. Provides as-built changes on plans for records. Reads, understands, and ensures compliance with the District Safety Manual; attends safety meetings, as required; reports all accidents, violations, or infractions to supervisor. Performs confined space and permit required confined space entry as defined by the California Code Of Regulations Title 8, General Industry Safety Orders, Section 5157; completes pre-entry check lists, performs atmospheric testing and evaluation of various entry conditions and situations as outlined in Appendix C to the above referenced regulations; assists in the calibration and maintenance of confined space atmospheric testing instrumentation and self-contained breathing apparatus units. Responds to water and wastewater plants, boosters, wells and lift station emergencies and problems as required; makes emergency field repairs; responds to after hour emergencies when called upon to do so. Participates in standby rotation. Responds to public inquiries in a courteous manner; provides information in accordance with district policies. Must be able to respond within a forty-five (45) minute time period to the District's Corporate Yard while on standby duty; must be able to communicate by telephone while on standby duty. Performs related duties as required. Compensation: Medical, dental, vision, accidental death and dismemberment insurance, a life insurance policy equal to two times the annual salary for the employee and a $1,000.00 policy for eligible dependents. Benefits become effective on the first of the month following a 30-day waiting period and the Authority contributes 90% of the cost of such insurance. CalPERS Retirement is provided using the 2.7 at age 55 formula for “Classic” Members. Retirement is provided using the 2% at age 62 formula for “New/PEPRA” Members. Three deferred compensation plans to which an employee may voluntarily contribute up to $23,000 per year. The Authority does not contribute to these plans. Twelve (12) paid holidays per year. Upon employment with WESA for one (1) year, employees also receive one (1) floating holiday annually. Employees accrue vacation at a rate of 3.08 hours per two-week pay period for the first 4 years of employment; 4.62 hours for years 5-9; 6.16 hours for years 10-14; 6.47 hours for years 15-19; and 6.78 for 20+ years of service. Sick leave is accrued at a rate of 3.70 hours per bi-weekly pay period for a total of 96.20 hours per year with unlimited accumulation. Additional benefits available include: 9/80 work schedule, Direct Deposit, Flexible Spending Accounts, Employee Assistance Program, Educational Assistance, Certification Reimbursement Program, Certification Bonus Program, Onsite Wellness Center, and two credit unions. Our Mission: To manage our natural resources to provide reliable, cost efficient and high quality water and wastewater services for the communities we serve, while promoting conservation, environmental responsibility, educations, community interaction, ethical behavior and recognizing employees as highly valuable assets. The Water Employee Services Authority: WESA was established as a joint powers authority between the Elsinore Valley Municipal Water District and Meeks & Daley Water Company. As a joint powers authority, WESA provides professional water and wastewater services to both agencies. WESA is committed to: •Professionalism-Demonstrating competency while maintaining a professional demeanor and upholding a reputation for expertise, efficiency, and high quality through delivery of information, services, and products. •Enthusiasm-Possessing a strong drive for learning, innovation, forward thinking, and the overall desire to do your job well. •Transparency-Demonstrating high moral standards in principles, intentions and actions; conduct that encourages loyalty, integrity, and trust. •Inclusiveness-Promoting respect and teamwork through communication and appreciation for all. •Stewardship-Taking ownership and responsibility for assigned responsibilities, while demonstrating a proactive, positive willingness to serve. The Application Process: If you are interested in this opportunity, submit a completed WESA employment application online at www.wesawater.com. Resumes and certifications may be included, but will not be accepted in lieu of a completed employment application. In order to be considered, applications must be received no later than 5:30pm on Friday, June 7, 2024. For questions and inquiries, please contact: Human Resources at HR@evmwd.net or (951) 674-3146 ext 8244. Closing Date/Time: 2024-06-07
May 14, 2024
The Position: Summary: Job descriptions are intended to present a descriptive list of the range of duties performed by employees in this job. Specifications are NOT intended to reflect all duties performed with the job. SUMMARY DESCRIPTION Under minimal direction, performs professional duties relating to installation, preventive and corrective maintenance, inspection and servicing of mechanical equipment, components, machinery and facilities associated with the production, pumping, storage, delivery and treatment of potable, agricultural, reclaimed and wastewater. Ensures compliance with the general waste discharge orders issued by the California Water Quality Board. Performs predictive, preventive and corrective maintenance on a wide variety of pumps, engines and other equipment related to wastewater treatment plants, water treatment plants, wells and booster stations. Obtains, analyzes and inputs to a computerized maintenance management program the preventive or corrective maintenance and repair information for all work performed. Participates in the development of District Safety programs. Operates and maintains a variety of light and heavy equipment as well as hand and power tools. Immediate Impact: The successful candidate will be given the following objectives upon hire: Within the first 3 months, demonstrate familiarity with the preventive and corrective maintenance program framework. This will include navigation of the Computerized Maintenance Management System (CMMS). Within the first 6 months, create and present a 30-45 minute training session on a primary mover equipment repair process of the incumbent’s choice. Within the first 9 months, demonstrate the ability to utilize the purchasing system to create requestions for outside vendors. Within the first 12 months, provide a written assessment as to the status of all the primary mover equipment in the assigned work area, for both water and wastewater, which will include the recommendations for repair, overhaul or replacement. The Ideal Candidate: Plans, leads, trains and reviews the work of staff responsible for the maintenance, troubleshooting, installation and repair of water and wastewater process equipment. Performs highly technical tasks related to diagnosis, overhaul and replacement of complex equipment Plans and coordinates preventive and corrective maintenance program jobs and projects; communicates clearly and concisely, both orally and in writing. Knowledge of occupational safety hazards and safe work practices; operating characteristics of computers and applicable software applications such as SCADA and Computerized Maintenance Management System. Five (5) years of increasingly responsible experience in the maintenance and repair of mechanical equipment used in the distribution, collection, and treatment of water or wastewater systems. Possession of a California Class B driver’s license with air brake and tanker endorsements, to be maintained throughout employment. Possession of a valid Grade II Mechanical Technologist Certificate issued by the California Water Environment Association. Possession of or ability to obtain a valid Grade III Mechanical Technologist Certificate issued by the California Water Environment Association within twelve (12) months of employment. Possession of a valid Water Distribution Operator Grade II (D2) Certificate issued by the California State Water Resources Control Board. Possession of a crane operator certification issued by the National Commission for the Certification of Crane Operators. Responsibilities: The following duties are typical for this classification. Incumbents may not perform all duties and/or may be required to perform additional or different duties from those set forth below to address business needs and changing business practices. Plans, leads and reviews the work of staff responsible for the maintenance, troubleshooting, installation and repair of equipment at the District’s wells, booster stations, water and wastewater treatment plants, and other District facilities. Trains assigned employees to ensure competence in the skills and techniques necessary to repair and maintain District’s mechanical equipment properly and safely. Leads the installation and maintenance of mechanical equipment including pumps, motors, gear boxes, valves, solenoids, mechanical seals, seal fluid filters, bearings, gaskets, air compressors, air blowers and other related equipment. Oversees and participates in troubleshooting, diagnosing and performing corrective action for the District’s mechanical equipment using specialized tools and testing/diagnostic equipment. Plans, coordinates, performs and records repair operations, equipment replacement, new equipment installations and related special projects as directed by supervisor.Maintains records, updates as-built drawings and creates a variety of reports including time, materials, and other costs related to the project. Responsible for preventive/predictive maintenance program functions including the maintenance, repair service and overhaul activities on wells, pumping stations, water/wastewater treatment plants and other equipment related to the production, pumping, storage and delivery of potable, agricultural, reclaimed and wastewater; ensures maximum performance and efficiency of equipment. Understands care and operation of assigned maintenance light and heavy equipment and tools, including service trucks, mobile knuckle crane, dump trucks, forklifts, portable/stationary generators, pressure washers, air compressors, pneumatic, hydraulic and electric tools and other equipment as assigned; sets up and uses rigging equipment to move pumps, motors, and other heavy parts or equipment; uses diagnostic, analytical, and measurement instrumentation/tools. Operates a large knuckle boom crane to install new pumps and motors on booster pumps and wells. Diagnoses well and booster pumping station operation using specialized tools and testing/diagnostic instrumentation; troubleshoots pumps and motors and makes appropriate adjustments and repairs; inspects, maintains and repairs hydraulic and pneumatic systems; installs, modifies, inspects and maintains piping associated with wells and water pumping stations. Assists in maintaining and repairing dam hydraulic gate systems. Reads, understands, interprets and works from blueprints, plans, schematics, diagrams and maps as related to wells, pumping stations, hydraulic control equipment and electrical control systems. Reads and understands electrical schematics. Maintains accurate, up to date records on all maintenance repair and service activity. Defines and enters into a computerized maintenance management program the scheduled maintenance and repair task descriptions on horizontal, centrifugal and deep well type turbine pumps, engines, motors and other mechanical or electrical equipment. Performs mechanical work in the maintenance, repair, overhauling, and/or rebuilding of equipment, components, pumps, valves, electrical motors, and engines associated with and used within municipal water, wastewater and agricultural systems. Performs preventive mechanical maintenance by inspecting and cleaning equipment, changing out lubricating fluids, repacking bearings, adjusting and replacing belts, gear boxes, pistons, filters, valves, gaskets and other related parts. Uses standard and specialized test equipment such as alignment gauges, insulation tester, voltmeter, ammeter, vibration monitoring equipment, infrared thermal imaging camera and other specialized test equipment. Performs corrective maintenance by troubleshooting cause of malfunction using visual inspection and precision measuring and testing instruments and replacing or repairing broken parts such as gauges, gaskets, sensors, switches, bearings, valves, pistons, rings, crankshafts and pumps. Rebuilds equipment by disassembling, cleaning, and repairing mechanical malfunctions; reassembles and tests equipment to ensure that it is in proper working condition. Installs and troubleshoots new electrical and mechanical equipment and tests for proper operation. Orders replacement parts to perform maintenance and repairs as necessary. Maintains inventory of replacement parts and equipment. Uses and manages District-assigned procurement credit card by allocating transactions to proper accounts and submitting receipts with monthly statement to supervisor. Operates and maintains a variety of hand tools, power tools, pneumatic tools, and other equipment in the performance of assigned mechanical duties. Works with other water/wastewater staff and sub-contractors in performing maintenance duties as necessary including electrical and/or mechanical repairs and maintenance. Performs field inventories and verifies equipment nameplate data. Provides as-built changes on plans for records. Reads, understands, and ensures compliance with the District Safety Manual; attends safety meetings, as required; reports all accidents, violations, or infractions to supervisor. Performs confined space and permit required confined space entry as defined by the California Code Of Regulations Title 8, General Industry Safety Orders, Section 5157; completes pre-entry check lists, performs atmospheric testing and evaluation of various entry conditions and situations as outlined in Appendix C to the above referenced regulations; assists in the calibration and maintenance of confined space atmospheric testing instrumentation and self-contained breathing apparatus units. Responds to water and wastewater plants, boosters, wells and lift station emergencies and problems as required; makes emergency field repairs; responds to after hour emergencies when called upon to do so. Participates in standby rotation. Responds to public inquiries in a courteous manner; provides information in accordance with district policies. Must be able to respond within a forty-five (45) minute time period to the District's Corporate Yard while on standby duty; must be able to communicate by telephone while on standby duty. Performs related duties as required. Compensation: Medical, dental, vision, accidental death and dismemberment insurance, a life insurance policy equal to two times the annual salary for the employee and a $1,000.00 policy for eligible dependents. Benefits become effective on the first of the month following a 30-day waiting period and the Authority contributes 90% of the cost of such insurance. CalPERS Retirement is provided using the 2.7 at age 55 formula for “Classic” Members. Retirement is provided using the 2% at age 62 formula for “New/PEPRA” Members. Three deferred compensation plans to which an employee may voluntarily contribute up to $23,000 per year. The Authority does not contribute to these plans. Twelve (12) paid holidays per year. Upon employment with WESA for one (1) year, employees also receive one (1) floating holiday annually. Employees accrue vacation at a rate of 3.08 hours per two-week pay period for the first 4 years of employment; 4.62 hours for years 5-9; 6.16 hours for years 10-14; 6.47 hours for years 15-19; and 6.78 for 20+ years of service. Sick leave is accrued at a rate of 3.70 hours per bi-weekly pay period for a total of 96.20 hours per year with unlimited accumulation. Additional benefits available include: 9/80 work schedule, Direct Deposit, Flexible Spending Accounts, Employee Assistance Program, Educational Assistance, Certification Reimbursement Program, Certification Bonus Program, Onsite Wellness Center, and two credit unions. Our Mission: To manage our natural resources to provide reliable, cost efficient and high quality water and wastewater services for the communities we serve, while promoting conservation, environmental responsibility, educations, community interaction, ethical behavior and recognizing employees as highly valuable assets. The Water Employee Services Authority: WESA was established as a joint powers authority between the Elsinore Valley Municipal Water District and Meeks & Daley Water Company. As a joint powers authority, WESA provides professional water and wastewater services to both agencies. WESA is committed to: •Professionalism-Demonstrating competency while maintaining a professional demeanor and upholding a reputation for expertise, efficiency, and high quality through delivery of information, services, and products. •Enthusiasm-Possessing a strong drive for learning, innovation, forward thinking, and the overall desire to do your job well. •Transparency-Demonstrating high moral standards in principles, intentions and actions; conduct that encourages loyalty, integrity, and trust. •Inclusiveness-Promoting respect and teamwork through communication and appreciation for all. •Stewardship-Taking ownership and responsibility for assigned responsibilities, while demonstrating a proactive, positive willingness to serve. The Application Process: If you are interested in this opportunity, submit a completed WESA employment application online at www.wesawater.com. Resumes and certifications may be included, but will not be accepted in lieu of a completed employment application. In order to be considered, applications must be received no later than 5:30pm on Friday, June 7, 2024. For questions and inquiries, please contact: Human Resources at HR@evmwd.net or (951) 674-3146 ext 8244. Closing Date/Time: 2024-06-07
Cal State University (CSU) Fresno
5241 N Maple Ave, Fresno, CA 93740, USA
Equipment Technician III (Equipment Technician III, Specialized Equipment) Compensation and Benefits Anticipated Hiring Salary Range: $5,600 - $6,250 per month Full CSU Classification Salary Range: $4,394 - $7,950 per month This is a full-time (equivalent to 40 hours per week), probationary, non-exempt position. The CSU system provides a comprehensive benefit package that includes medical, dental and vision plans, membership in the California Public Employees Retirement System (CalPERS), sick and vacation time, and 15 paid holidays a year. Eligible employees are also able to participate in the fee waiver education program. A summary of benefit information can be found here . Job Summary The Equipment Technician serves as the primary technician for the wide-ranging equipment housed within the Biology Department. An important focus of this position is microscope maintenance for the teaching and research labs in the department. Working independently under general supervision, this person performs duties in consultation with the Chair and other technicians in the College of Science and Mathematics to maintain instructional research equipment. Key Qualifications Learn skills and demonstrate willingness to assume new responsibilities. Work effectively with faculty, staff, students, and the general public from diverse ethnic, cultural and socio-economic backgrounds. Ability to handle multiple work priorities. Strong oral communication skills. Performs duties under all safety and environmental regulations, rules, policies, and guidelines. Possess or be willing to learn computer skills, record keeping, communication and information gathering. Possess or be willing to learn installation, maintenance, repair and operation of microscopes and other scientific instrumentation. Possess or be willing to learn to troubleshoot instrument problems. The incumbent also will be expected to take the initiative to learn how to operate and repair unique, complex, and specialized devices. Possess or be willing to learn to analyze equipment problems and determine what repairs are needed. Possess or be willing to learn to install, repair, and maintain a wide variety of equipment. Strong ethic and ability to work both independently and cooperatively. To view the full list of qualifications and job responsibilities, please click the Position Description button above. Education and Experience Three (3) years of progressively responsible journey-level or skilled experience in the maintenance, repair, and operation of scientific or technical equipment: Or equivalent to two (2) years of semi-skilled experience maintaining and repairing scientific or technical equipment or related equipment experience as part of instructional support activities may be substituted for one (1) year of the required experience. Or equivalent to two (2) years of trade school or technical arts training with specialization in the type of equipment repair to which assigned. Completion of an apprenticeship program or completion of a full military specialization in the required type of equipment maintenance and repair may be substituted for one (1) year of the required experience. Preferred Skills: Knowledge of a diverse array of optical instruments. The ability to diagnose and repair computer interfaces with biological instrumentation. Maintenance of microscopes, PCR/qPCR machines, DNA sequencer, biosafety cabinets, water baths, mass spectrometers, fridges, freezers, incubators, shakers, etc. Department Summary The mission of the Department of Biology at California State University, Fresno is to prepare students for the future with broad training in biology at the undergraduate and graduate (Master's level). The Department focuses on innovative student-centered strategies, research-focused teaching, and faculty mentoring to advance student success. At both the undergraduate and graduate levels, students work with faculty to carry out cutting edge research of relevance to Central California and beyond. Research and teaching programs are collaborative and integrative. To meet the needs of the diverse Central Valley population, the Department promotes science literacy, does outreach to the community, provides content expertise for science educators, and prepares science teachers. Deadline & Application Instructions Applications received by March 3, 2024 will be given full consideration by the search committee. Applications received after that date will be forwarded at the request of the Hiring Manager and/or search committee. Please click “Apply Now” to complete the employment application for California State University, Fresno. Interested applicants must complete the application and attach the following: 1) their most recent resumé/vitae, 2) a cover letter that addresses their specific qualifications and interest, and 3) contact information for three professional references. Fresno State California State University, Fresno is one of 23 campuses in the California State University System. The University's mission is to boldly educate and empower students for success through our values of Discovery, Diversity and Distinction. The current student population is more than 25,000, including a large percentage of students with diverse and culturally rich backgrounds. The University serves the San Joaquin Valley while maintaining deep involvement with the state, nation, and across the globe. Metropolitan Fresno, with a multi-ethnic population of over 527,000, is located in the heart of the San Joaquin Valley. The campus is within driving distance of Yosemite, Kings Canyon and Sequoia National Parks, San Francisco, Los Angeles, the Monterey Peninsula, beaches, sailing, lakes, and numerous ski resorts. Fresno boasts one of the most reasonable housing markets in California and offers a wide array of locally grown fruits and produce. Equal Employment Opportunity Information California State University, Fresno is committed to maintaining and implementing employment policies and procedures in compliance with applicable state and federal equal employment opportunity laws and regulations. Executive Orders 1096 and 1097 prohibit discrimination, harassment, and retaliation on the basis of a protected status: race, color, religion, national origin, ancestry, age, sex (including gender identity), sexual orientation, marital status, pregnancy, mental disability, physical disability, medical condition and covered veteran status. Fresno State's commitment to diversity informs our efforts in recruitment, hiring, and retention. We are proud to be an affirmative action and equal opportunity employer. COVID19 Vaccination Policy Per the CSU COVID-19 Vaccination Policy , it is strongly recommended that all employees who are accessing office and campus facilities follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications. Questions may be sent to hr@csufresno.edu . Supplemental Information Following a conditional offer of employment, a background check (including a criminal records check) must be completed satisfactorily before any candidate may start work with California State University, Fresno. Failure to satisfactorily complete the background check may result in the withdrawal of the offer of employment. Current employees who are offered positions on campus will be required to undergo a background check for any position where a background check is required by law or that Fresno State has identified as sensitive. The person holding this position is considered a "mandated reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. This position may be a "designated position" under the California State University's Conflict of Interest Code. This will require the filing of a Statement of Economic Interest on an annual basis and the completion of training within six (6) months of assuming office and every two (2) years thereafter. Fresno State is a tobacco-free, smoke-free and vapor-free campus. Fresno State is not a sponsoring agency for staff or management positions. (e.g. H1-B Visas) Advertised: Feb 09 2024 Pacific Standard Time Applications close: Closing Date/Time:
Mar 07, 2024
Equipment Technician III (Equipment Technician III, Specialized Equipment) Compensation and Benefits Anticipated Hiring Salary Range: $5,600 - $6,250 per month Full CSU Classification Salary Range: $4,394 - $7,950 per month This is a full-time (equivalent to 40 hours per week), probationary, non-exempt position. The CSU system provides a comprehensive benefit package that includes medical, dental and vision plans, membership in the California Public Employees Retirement System (CalPERS), sick and vacation time, and 15 paid holidays a year. Eligible employees are also able to participate in the fee waiver education program. A summary of benefit information can be found here . Job Summary The Equipment Technician serves as the primary technician for the wide-ranging equipment housed within the Biology Department. An important focus of this position is microscope maintenance for the teaching and research labs in the department. Working independently under general supervision, this person performs duties in consultation with the Chair and other technicians in the College of Science and Mathematics to maintain instructional research equipment. Key Qualifications Learn skills and demonstrate willingness to assume new responsibilities. Work effectively with faculty, staff, students, and the general public from diverse ethnic, cultural and socio-economic backgrounds. Ability to handle multiple work priorities. Strong oral communication skills. Performs duties under all safety and environmental regulations, rules, policies, and guidelines. Possess or be willing to learn computer skills, record keeping, communication and information gathering. Possess or be willing to learn installation, maintenance, repair and operation of microscopes and other scientific instrumentation. Possess or be willing to learn to troubleshoot instrument problems. The incumbent also will be expected to take the initiative to learn how to operate and repair unique, complex, and specialized devices. Possess or be willing to learn to analyze equipment problems and determine what repairs are needed. Possess or be willing to learn to install, repair, and maintain a wide variety of equipment. Strong ethic and ability to work both independently and cooperatively. To view the full list of qualifications and job responsibilities, please click the Position Description button above. Education and Experience Three (3) years of progressively responsible journey-level or skilled experience in the maintenance, repair, and operation of scientific or technical equipment: Or equivalent to two (2) years of semi-skilled experience maintaining and repairing scientific or technical equipment or related equipment experience as part of instructional support activities may be substituted for one (1) year of the required experience. Or equivalent to two (2) years of trade school or technical arts training with specialization in the type of equipment repair to which assigned. Completion of an apprenticeship program or completion of a full military specialization in the required type of equipment maintenance and repair may be substituted for one (1) year of the required experience. Preferred Skills: Knowledge of a diverse array of optical instruments. The ability to diagnose and repair computer interfaces with biological instrumentation. Maintenance of microscopes, PCR/qPCR machines, DNA sequencer, biosafety cabinets, water baths, mass spectrometers, fridges, freezers, incubators, shakers, etc. Department Summary The mission of the Department of Biology at California State University, Fresno is to prepare students for the future with broad training in biology at the undergraduate and graduate (Master's level). The Department focuses on innovative student-centered strategies, research-focused teaching, and faculty mentoring to advance student success. At both the undergraduate and graduate levels, students work with faculty to carry out cutting edge research of relevance to Central California and beyond. Research and teaching programs are collaborative and integrative. To meet the needs of the diverse Central Valley population, the Department promotes science literacy, does outreach to the community, provides content expertise for science educators, and prepares science teachers. Deadline & Application Instructions Applications received by March 3, 2024 will be given full consideration by the search committee. Applications received after that date will be forwarded at the request of the Hiring Manager and/or search committee. Please click “Apply Now” to complete the employment application for California State University, Fresno. Interested applicants must complete the application and attach the following: 1) their most recent resumé/vitae, 2) a cover letter that addresses their specific qualifications and interest, and 3) contact information for three professional references. Fresno State California State University, Fresno is one of 23 campuses in the California State University System. The University's mission is to boldly educate and empower students for success through our values of Discovery, Diversity and Distinction. The current student population is more than 25,000, including a large percentage of students with diverse and culturally rich backgrounds. The University serves the San Joaquin Valley while maintaining deep involvement with the state, nation, and across the globe. Metropolitan Fresno, with a multi-ethnic population of over 527,000, is located in the heart of the San Joaquin Valley. The campus is within driving distance of Yosemite, Kings Canyon and Sequoia National Parks, San Francisco, Los Angeles, the Monterey Peninsula, beaches, sailing, lakes, and numerous ski resorts. Fresno boasts one of the most reasonable housing markets in California and offers a wide array of locally grown fruits and produce. Equal Employment Opportunity Information California State University, Fresno is committed to maintaining and implementing employment policies and procedures in compliance with applicable state and federal equal employment opportunity laws and regulations. Executive Orders 1096 and 1097 prohibit discrimination, harassment, and retaliation on the basis of a protected status: race, color, religion, national origin, ancestry, age, sex (including gender identity), sexual orientation, marital status, pregnancy, mental disability, physical disability, medical condition and covered veteran status. Fresno State's commitment to diversity informs our efforts in recruitment, hiring, and retention. We are proud to be an affirmative action and equal opportunity employer. COVID19 Vaccination Policy Per the CSU COVID-19 Vaccination Policy , it is strongly recommended that all employees who are accessing office and campus facilities follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications. Questions may be sent to hr@csufresno.edu . Supplemental Information Following a conditional offer of employment, a background check (including a criminal records check) must be completed satisfactorily before any candidate may start work with California State University, Fresno. Failure to satisfactorily complete the background check may result in the withdrawal of the offer of employment. Current employees who are offered positions on campus will be required to undergo a background check for any position where a background check is required by law or that Fresno State has identified as sensitive. The person holding this position is considered a "mandated reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. This position may be a "designated position" under the California State University's Conflict of Interest Code. This will require the filing of a Statement of Economic Interest on an annual basis and the completion of training within six (6) months of assuming office and every two (2) years thereafter. Fresno State is a tobacco-free, smoke-free and vapor-free campus. Fresno State is not a sponsoring agency for staff or management positions. (e.g. H1-B Visas) Advertised: Feb 09 2024 Pacific Standard Time Applications close: Closing Date/Time:
Cal State University (CSU) San Jose
1 Washington Street, San Jose, CA 95192, USA
Job Summary Reporting to the Engineering Central Shops Department Lead, the equipment technician maintains equipment within the college, with a particular focus on Mechanical Engineering. The equipment technician assists with faculty and student projects. Key Responsibilities Maintains and upgrades equipment and instrumentation in Mechanical Engineering laboratories, such as robotics, mechatronics, controls, measurements, thermal systems, and mechanical design laboratories. Provides assistance as needed with mechanical- and aerodynamics-related equipment maintenance and upgrades in other departments in the College of Engineering. Assists with faculty and student projects as needed, particularly for Mechanical Engineering, including machining and fabricating parts and guiding students in the Engr 123 machine shop.. Ensures safe operation of department labs, club spaces, and Engr 123 machine shop. Inventories supplies and materials for Mechanical Engineering labs and Engr 123 machine shop. Orders parts, tools, and instruments. Participates as a member of College’s technician team. Interfaces collaboratively and effectively with other College technicians; assists other departments with technical issues when needed. Participates as a member of the building emergency response team Works with student assistant team to move furniture and equipment and make deliveries Programs and maintains omnilocks for the college Knowledge, Skills & Abilities Demonstrable skill in basic machine shop fabrication practices and tools such as mill, lathe, CNC, drill press, arc welder, CAD/CAM, 3D printing, and others. Ability to troubleshoot and repair, install and replace, modify and maintain equipment and associated instrumentation in mechanical/aerospace specializations down to the module level. Examples include pumps; vacuum units and gages; engines; pressure, temperature, strain, positioning, vibration, velocity and acceleration sensors and associated conditioning units; pneumatic and hydraulic actuators and controls, and electromechanical devices. Additional consideration will be given to those candidates with knowledge of data acquisition programs such as LabVIEW, instrumentation, and controls. Good communication skills; ability to work with diverse groups of people including department chair and faculty, students, other college technicians, facilities and operations, and vendors. Ability to identify and initiate tasks, to prioritize tasks, and to work independently. Ability and desire to learn new technical skills both on-the-job and through pertinent training. Required Qualifications (Only one of the three qualifications below must be met) 1. Equivalent to two years of journey-level or skilled experience in the maintenance, repair, and operation of scientific or technical equipment in the specialty area to which assigned such as mechanical, electromechanical, electronics or in the specialized category including construction and fabrication and some precision work or requiring trade or craft skills working with a variety of unique materials, or 2. Equivalent to two years of semi-skilled experience maintaining and repairing scientific or technical equipment or related experience in the type of equipment to which assigned as part of instructional support activities may be substituted for one year of the required experience, or 3. Equivalent to two years of trade school or technical arts training with specialization in the type of equipment repair to which assigned, completion of an apprenticeship program, or completion of a full military specialization in the required type of equipment maintenance and repair for one year of the required experience License A valid driver's license is required for this position. Out of state candidates selected for the position must obtain a State of California driver's license within 10 days of hire in accordance with the California Department of Motor Vehicles regulations. Once hired the employee must successfully complete the Defensive Driver Training Program provided by the State of California for California State University campuses. Preferred Qualifications Bachelor’s degree in technology or closely related field, or equivalent experience. Minimum of 5 years of experience in a technical environment Compensation Classification: Equipment Technician II - Mechanical Anticipated Hiring Range: $4,821/month - $5,056/month CSU Salary Range: $4,010/month - $7,254/month San José State University offers employees a comprehensive benefits package typically worth 30-35% of your base salary. For more information on programs available, please see the Employee Benefits Summary . Application Procedure Click Apply Now to complete the SJSU Online Employment Application and attach the following documents: Resume Letter of Interest All applicants must apply within the specified application period: October 9, 2023 through October 23, 2023 . This position is open until filled; however, applications received after screening has begun will be considered at the discretion of the university. Contact Information University Personnel jobs@sjsu.edu 408-924-2252 CSU Vaccination Policy The CSU strongly recommends that all individuals who access any in-person program or activity (on- or off-campus) operated or controlled by the University follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications and comply with other safety measures established by each campus. The system wide policy can be found at https://calstate.policystat.com/policy/9779821/latest/ and questions may be sent to jobs@sjsu.edu . Additional Information Satisfactory completion of a background check (including a criminal records check) is required for employment. SJSU will issue a contingent offer of employment to the selected candidate, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current CSU employee who was offered the position on a contingent basis. The standard background check includes: criminal check, employment and education verification. Depending on the position, a motor vehicle and/or credit check may be required. All background checks are conducted through the university's third party vendor, Accurate Background. Some positions may also require fingerprinting. SJSU will pay all costs associated with this procedure. Evidence of required degree(s) or certification(s) will be required at time of hire. SJSU IS NOT A SPONSORING AGENCY FOR STAFF OR MANAGEMENT POSITIONS. (e.g. H1-B VISAS) All San José State University employees are considered mandated reporters under the California Child Abuse and Neglect Reporting Act and are required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Incumbent is also required to promptly report any knowledge of a possible Title IX related incident to the Title IX Office or report any discrimination, harassment, and/or retaliation to the Office of Equal Opportunity. Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act and Campus Housing Fire Safety Notification: Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act, the Annual Security Report (ASR) is also now available for viewing at https://www.sjsu.edu/clery/docs/SJSU-Annual-Security-Report.pdf. The ASR contains the current security and safety-related policy statements, emergency preparedness and evacuation information, crime prevention and Sexual Assault prevention information, and information about drug and alcohol prevention programming. The ASR also contains statistics of Clery crimes for San José State University locations for the three most recent calendar years. A paper copy of the ASR is available upon request by contacting the Office of the Clery Director by phone at 408-924-1501 or by email at clerycompliance@sjsu.edu . Pursuant to the Higher Education Opportunity Act, the Annual Fire Safety Report (AFSR) is also available for viewing at https://www.sjsu.edu/clery/docs/SJSU-Annual-Fire-Safety-Report.pdf . The purpose of this report is to disclose statistics for fires that occurred within SJSU on-campus housing facilities for the three most recent calendar years, and to distribute fire safety policies and procedures intended to promote safety on Campus. A paper copy of the AFSR is available upon request by contacting the Housing Office by phone at 408-795-5600 or by email at uhs-frontdesk@sjsu.edu . Campus Security Authority - In accordance with the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act (Clery Act) and CSU systemwide policy, this position is subject to ongoing review for designation as a Campus Security Authority. Individuals that are designated as Campus Security Authorities are required to immediately report Clery incidents to the institution and complete Clery Act training as determined by the university Clery Director. Equal Employment Statement San José State University (SJSU) is an Equal Opportunity/Affirmative Action employer committed to nondiscrimination on the basis of age, ancestry, citizenship status, color, creed, disability, ethnicity, gender, genetic information, marital status, medical condition, national origin, race, religion or lack thereof, sex, sexual orientation, transgender, or protected veteran status consistent with applicable federal and state laws. This policy applies to all SJSU students, faculty and staff programs and activities. Title IX of the Education Amendments of 1972, and certain other federal and state laws, prohibit discrimination on the basis of sex in all education programs and activities operated by the university (both on and off campus). Advertised: Oct 09 2023 Pacific Daylight Time Applications close: Closing Date/Time:
Mar 07, 2024
Job Summary Reporting to the Engineering Central Shops Department Lead, the equipment technician maintains equipment within the college, with a particular focus on Mechanical Engineering. The equipment technician assists with faculty and student projects. Key Responsibilities Maintains and upgrades equipment and instrumentation in Mechanical Engineering laboratories, such as robotics, mechatronics, controls, measurements, thermal systems, and mechanical design laboratories. Provides assistance as needed with mechanical- and aerodynamics-related equipment maintenance and upgrades in other departments in the College of Engineering. Assists with faculty and student projects as needed, particularly for Mechanical Engineering, including machining and fabricating parts and guiding students in the Engr 123 machine shop.. Ensures safe operation of department labs, club spaces, and Engr 123 machine shop. Inventories supplies and materials for Mechanical Engineering labs and Engr 123 machine shop. Orders parts, tools, and instruments. Participates as a member of College’s technician team. Interfaces collaboratively and effectively with other College technicians; assists other departments with technical issues when needed. Participates as a member of the building emergency response team Works with student assistant team to move furniture and equipment and make deliveries Programs and maintains omnilocks for the college Knowledge, Skills & Abilities Demonstrable skill in basic machine shop fabrication practices and tools such as mill, lathe, CNC, drill press, arc welder, CAD/CAM, 3D printing, and others. Ability to troubleshoot and repair, install and replace, modify and maintain equipment and associated instrumentation in mechanical/aerospace specializations down to the module level. Examples include pumps; vacuum units and gages; engines; pressure, temperature, strain, positioning, vibration, velocity and acceleration sensors and associated conditioning units; pneumatic and hydraulic actuators and controls, and electromechanical devices. Additional consideration will be given to those candidates with knowledge of data acquisition programs such as LabVIEW, instrumentation, and controls. Good communication skills; ability to work with diverse groups of people including department chair and faculty, students, other college technicians, facilities and operations, and vendors. Ability to identify and initiate tasks, to prioritize tasks, and to work independently. Ability and desire to learn new technical skills both on-the-job and through pertinent training. Required Qualifications (Only one of the three qualifications below must be met) 1. Equivalent to two years of journey-level or skilled experience in the maintenance, repair, and operation of scientific or technical equipment in the specialty area to which assigned such as mechanical, electromechanical, electronics or in the specialized category including construction and fabrication and some precision work or requiring trade or craft skills working with a variety of unique materials, or 2. Equivalent to two years of semi-skilled experience maintaining and repairing scientific or technical equipment or related experience in the type of equipment to which assigned as part of instructional support activities may be substituted for one year of the required experience, or 3. Equivalent to two years of trade school or technical arts training with specialization in the type of equipment repair to which assigned, completion of an apprenticeship program, or completion of a full military specialization in the required type of equipment maintenance and repair for one year of the required experience License A valid driver's license is required for this position. Out of state candidates selected for the position must obtain a State of California driver's license within 10 days of hire in accordance with the California Department of Motor Vehicles regulations. Once hired the employee must successfully complete the Defensive Driver Training Program provided by the State of California for California State University campuses. Preferred Qualifications Bachelor’s degree in technology or closely related field, or equivalent experience. Minimum of 5 years of experience in a technical environment Compensation Classification: Equipment Technician II - Mechanical Anticipated Hiring Range: $4,821/month - $5,056/month CSU Salary Range: $4,010/month - $7,254/month San José State University offers employees a comprehensive benefits package typically worth 30-35% of your base salary. For more information on programs available, please see the Employee Benefits Summary . Application Procedure Click Apply Now to complete the SJSU Online Employment Application and attach the following documents: Resume Letter of Interest All applicants must apply within the specified application period: October 9, 2023 through October 23, 2023 . This position is open until filled; however, applications received after screening has begun will be considered at the discretion of the university. Contact Information University Personnel jobs@sjsu.edu 408-924-2252 CSU Vaccination Policy The CSU strongly recommends that all individuals who access any in-person program or activity (on- or off-campus) operated or controlled by the University follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications and comply with other safety measures established by each campus. The system wide policy can be found at https://calstate.policystat.com/policy/9779821/latest/ and questions may be sent to jobs@sjsu.edu . Additional Information Satisfactory completion of a background check (including a criminal records check) is required for employment. SJSU will issue a contingent offer of employment to the selected candidate, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current CSU employee who was offered the position on a contingent basis. The standard background check includes: criminal check, employment and education verification. Depending on the position, a motor vehicle and/or credit check may be required. All background checks are conducted through the university's third party vendor, Accurate Background. Some positions may also require fingerprinting. SJSU will pay all costs associated with this procedure. Evidence of required degree(s) or certification(s) will be required at time of hire. SJSU IS NOT A SPONSORING AGENCY FOR STAFF OR MANAGEMENT POSITIONS. (e.g. H1-B VISAS) All San José State University employees are considered mandated reporters under the California Child Abuse and Neglect Reporting Act and are required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Incumbent is also required to promptly report any knowledge of a possible Title IX related incident to the Title IX Office or report any discrimination, harassment, and/or retaliation to the Office of Equal Opportunity. Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act and Campus Housing Fire Safety Notification: Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act, the Annual Security Report (ASR) is also now available for viewing at https://www.sjsu.edu/clery/docs/SJSU-Annual-Security-Report.pdf. The ASR contains the current security and safety-related policy statements, emergency preparedness and evacuation information, crime prevention and Sexual Assault prevention information, and information about drug and alcohol prevention programming. The ASR also contains statistics of Clery crimes for San José State University locations for the three most recent calendar years. A paper copy of the ASR is available upon request by contacting the Office of the Clery Director by phone at 408-924-1501 or by email at clerycompliance@sjsu.edu . Pursuant to the Higher Education Opportunity Act, the Annual Fire Safety Report (AFSR) is also available for viewing at https://www.sjsu.edu/clery/docs/SJSU-Annual-Fire-Safety-Report.pdf . The purpose of this report is to disclose statistics for fires that occurred within SJSU on-campus housing facilities for the three most recent calendar years, and to distribute fire safety policies and procedures intended to promote safety on Campus. A paper copy of the AFSR is available upon request by contacting the Housing Office by phone at 408-795-5600 or by email at uhs-frontdesk@sjsu.edu . Campus Security Authority - In accordance with the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act (Clery Act) and CSU systemwide policy, this position is subject to ongoing review for designation as a Campus Security Authority. Individuals that are designated as Campus Security Authorities are required to immediately report Clery incidents to the institution and complete Clery Act training as determined by the university Clery Director. Equal Employment Statement San José State University (SJSU) is an Equal Opportunity/Affirmative Action employer committed to nondiscrimination on the basis of age, ancestry, citizenship status, color, creed, disability, ethnicity, gender, genetic information, marital status, medical condition, national origin, race, religion or lack thereof, sex, sexual orientation, transgender, or protected veteran status consistent with applicable federal and state laws. This policy applies to all SJSU students, faculty and staff programs and activities. Title IX of the Education Amendments of 1972, and certain other federal and state laws, prohibit discrimination on the basis of sex in all education programs and activities operated by the university (both on and off campus). Advertised: Oct 09 2023 Pacific Daylight Time Applications close: Closing Date/Time:
Sacramento County, CA
Sacramento, California, United States
The Position Come join one of Forbes Magazine's Best Employers! This is a limited continuous filing exam. The filing cut-offs are at 5:00 pm on: 3/27/24, 4/24/24, *5/24/24, *6/24/24, *8/1/24 (final) The Senior Engineering Technician performs a variety of tasks related in the performance of sub-professional engineering office, design assistance, and drafting work, including assisting the professional engineering staff in mechanical, structural, electrical, or instrumentation technical support work; perform engineering support work involving environmental control system operations & maintenance and monitoring labor compliance, traffic usage analysis, plan & map checking, construction administration, drafting, condition compliance and conformance, and issuing permits and determining required fees. Assignments may include responsibility for an ongoing project or program or providing lead direction for the implementation of systems with program or function wide impact. The Senior Engineering Technician may also provide lead direction and exercise control over the work of other assigned staff where the work requirements are well defined and a volume of past practices and precedents exist. The eligible list for this recruitment may be used to fill current and future vacancies. One current vacancy is for a Senior Labor Compliance Technician with the Construction Management and Inspection Division. Duties may include, but are not limited to the following: Administers and monitors the labor compliance requirements for construction contracts. Ensures the proper reporting of prevailing wages, fringe benefits, apprentice utilization and resolution of employee wage violations. Collects and reviews weekly Certified Payroll Reports (CPR's) and supporting payroll records (statement of compliance, fringe benefit statement, payroll deductions, apprentice registration, etc.) submitted by the prime and subcontractors on a weekly basis. Communicates with contractors to resolve discrepancies relative to the CPR submittals. Conducts investigations on alleged contractor violations uncovered from CPR reviews, site visits, workers' complaints, etc. to facilitate contractor compliance and timely contract completion. When appropriate, notifies Department of Industrial Relations and/or Department of Labor of contractor violations. Interprets and enforces all public works contract labor provisions including: DIR registration. Prepares and presents the labor compliance requirements at pre-bid and pre-construction meetings for contracts subject to the payment of prevailing wages. Responds to prevailing wage questions/concerns/matters that may arise from contractors, construction workers, County staff, and other Agencies. Responsible for documenting all prime contractors and subcontractors' responsiveness before releasing project funds and closing out labor compliance files in a timely manner. Examples of Knowledge and Abilities Knowledge of All Options Public works construction principles, practices, methodologies, and techniques Principles of training and work direction General Option Public works contract administration, fee & permit requirements Construction conditions requirements Traffic utilization analysis techniques and practices Labor compliance requirements Related legislative and rules relating to public works construction in the County Design & Drafting Option Specialized engineering support principles and practices utilizing conventional or computer-aided design and drafting techniques applicable to plans, schematics, sketches, and other materials utilized for the construction of public works facilities and structures Computer Specialist Option The principles and practices of the utilization and application of automated equipment and systems to the resolution of engineering related problems, including the knowledge of techniques and procedures for development and modification of software packages in the design, configuration, and implementation of unique solutions to engineering specific problems Geographic information Systems (GIS) Option Knowledge of GIS applications, including the capabilities, limitations, and characteristics ArcInfo computer software Mapping and geoprocessing operations of local government Computer-aided drafting Plan & Map Check Option Principles and practices of public works design and construction, Federal, State, and County improvement standards as they are applied to map and plan checking for conformance to established requirements and standards, including parcel and subdivision criteria Ability to Independently perform specialized assignments requiring extensive knowledge of sub-professional engineering work Represent the County in meetings and conferences with outside consultants, contractors, and other public agencies Provide lead direction Read, speak and write English at a level necessary for satisfactory job performance Employment Qualifications Minimum Qualifications Either : 1. Three years of full-time experience in the class of an Engineering Technician in Sacramento County service. Or : 2. Three years of sub-professional engineering experience involving public works facilities or structures work. Education Substitution: Completion of coursework in engineering or related field at an accredited college or university may be substituted for up to one year of the required experience. Related education substitutions for the required experience are computed on the basis of 3 semester units or 4.5 quarter units = 1 work month. Note: If the word “experience” is referenced in the minimum qualifications, it means full-time paid experience unless the minimum qualification states that volunteer experience is acceptable. Part-time paid experience may be accumulated and pro-rated to meet the total experience requirements. Note: If the minimum qualifications include an educational or certificate/license requirement, applicants must submit proof of requirements with the application. Failure to submit proof of requirements may result in disqualification from the examination. Unofficial transcripts are acceptable. For guidelines on submitting acceptable proof of educational requirements, please click here or speak to someone in our office before the final filing date listed in this notice. Special Requirements License Requirements: Some positions in this series require a valid California Driver's License, Class C or higher at the time of appointment. Note: Failure to maintain the appropriate valid California Driver's License constitutes cause for termination from the class in accordance with Civil Service Rule 11.4. Background Check: Applicants for positions assigned to the Department of Airports are subject to a criminal history record check in accordance with the Federal Aviation Administration, FAR 107.11(f) and Sacramento County Personnel Policies and Procedures. Probationary Period The probationary period for this classification is six (6) months. Application and Testing Information APPLICATION Qualified applicants are encouraged to apply immediately. All applicants must complete and submit an online County of Sacramento employment application by 5:00 PM on the posted cut-off date. Click here to apply. County of Sacramento Department of Personnel Services Employment Services Division 700 H Street, Room 4667 Sacramento, CA 95814 Phone (916) 874-5593; 7-1-1 California Relay Service Email EmployOffice@Saccounty.net Inter-Office Mail Code: 09-4667 www.SacCountyJobs.net Employment applications and all documentation requested in this announcement must be submitted by 5:00 p.m. on the cut-off date. Employment Services is not responsible for any issues or delays caused by an applicant's computer or web browser. Applicants will be automatically logged out if they have not submitted their applications and all documentation prior to 5:00 p.m. on the cut-off date. Your application should highlight all relevant education, training, and experience, and clearly indicate how you meet the minimum qualifications for the position as of the cut-off date. Application information must be current, concise and related to the requirements in this job announcement. You may only apply for this recruitment once. Duplicate and incomplete applications will be disqualified. A resume may be included with your application, however it will not substitute for the information requested on the application. SUPPLEMENTAL QUESTIONNAIRE Applicants are required to provide a full and complete response to each supplemental question. The Supplemental Questionnaire is located in the tab marked "Supplemental Questions". Please be descriptive in your response. Note: Responses of "See Resume" or "See Application", or copy and paste of work experience are not qualifying responses and will not be considered. Supplemental Questionnaires must be submitted by 5:00 p.m. on the cut-off date. Employment Services is not responsible for any issues or delays caused by an applicant's computer or web browser. Applicants will be automatically logged out if they have not submitted their applications and all documentation prior to 5:00 p.m. on the cut-off date. The supplemental questions are designed to elicit specific information regarding a candidate's experience, education, and training. Responses should be consistent with the information on your application and are subject to verification. Please provide place of employment, pertinent dates, and concise, descriptive and detailed information for each question. If a job included responsibilities applicable to several questions, separate the different functions of the job to answer all the questions completely. Resumes or referral to the application or other questionnaire responses will not be accepted in lieu of completing each question. If you have no experience, write "no experience" for the appropriate question. For many individuals, it is more efficient to develop responses to the supplemental questions in a word processing document and then paste them into the final document to be submitted. Changes or corrections to your Supplemental Questionnaire cannot be made once your application packet has been submitted. If the Supplemental Questionnaire is used in the Formula Rate exam, failure to complete all of the questions or incomplete responses will result in a lower score. While scoring the Supplemental Questionnaire, the candidate's application and/or attachments will not be reviewed , therefore, a candidate's responses to the questions should be accurate, thorough, detailed, and complete. FORMULA RATE EXAMINATION (Weighted 100%) All candidates meeting the minimum qualifications by the cut-off date will have their Supplemental Questionnaire scored in the Formula Rate Examination. This examination will evaluate the relevance, level, recency, progression and quality of candidate's education, training and experience. The candidate's application or other materials will not be included in this examination. Therefore, the candidate's responses to the supplemental questionnaire should be thorough, detailed and complete. The score from the Formula Rate Examination will determine the ranking on the eligible/employment list for this job. All candidates competing in the testing process will receive written notice of their examination results by email. Notices can also be accessed in their governmentjobs.com inbox. Applicants achieving a passing score will be placed on the eligible list in rank order. The rank is determined by the test score attained from the examination. FREQUENTLY ASKED QUESTIONS Click here for Frequently Asked Questions (FAQ's) For information regarding County jobs: www.saccountyjobs.net Applicants requesting reasonable accommodations during employment examinations: For more information, please review the Job Applicant Exam Reasonable Accommodation Information and submit an Employment Exam Reasonable Accommodation Online Request Form . EMPLOYEE BENEFITS As an employee of the County of Sacramento, there will be a variety of benefits available to you. These benefits currently include: health, dental and life insurance; flexible spending account options for dependent care and unreimbursed dental and/or medical cost; and an employee assistance program (EAP). GENERAL BENEFITS: Most employee benefits are similar to the following for all County employees. However, some benefits differ, depending on the employee representation unit to which the employee's job classification is assigned. Information about the exact benefits applicable to a particular job classification may be obtained from the Sacramento County Department of Benefits or by visiting www.saccountyjobs.net. TEMPORARY POSITIONS: Most benefits do not apply to temporary positions. The explanations of benefits applies to employees in regular positions. SALARY STEP INCREASES: The beginning salary and the top of the salary range are usually shown on the job announcement. Upon satisfactory service, salary increases of approximately 5% are given annually until the top of the salary range has been attained. PAY: All employees are paid bi-weekly via direct deposit into the employee's bank account. The pay period covers fourteen (14) calendar days, starting on a Sunday and ending on the second Saturday thereafter. Salaries are generally paid on the Friday following the end of the pay period. Employees can set up their direct deposit and access their pay information via Employee Self Service in MySacCounty. VACATION: Generally, vacation with pay begins at 10 days annually. With increase over a period of years, the maximum annual vacation with pay is 25 days. HOLIDAYS: 14.5 holidays per year as recognized. SICK LEAVE: Equivalent to 15 days annually, unlimited accumulation. Upon retirement, unused sick leave is converted to retirement service credit. PARENTAL LEAVE: Entitles a regular County employee, with at least one year of continuous employment, to schedule a paid parental leave of up to 160 hours upon the birth or during the process of an adoption of a minor child. Parental leave shall be approved by the employee's appointing authority, except where the granting of the parental leave request would unduly interfere with or cause severe hardship upon department operations. TUITION REIMBURSEMENT: Dependent upon union agreements, regular County employees may be eligible to receive Tuition Reimbursement. The costs for course tuition/registration fees and required books/supplies are eligible for reimbursement. Tuition reimbursement amounts may vary depending upon union agreement. RETIREMENT: Social Security and Sacramento County Employees' Retirement System coverage. HEALTH INSURANCE: The County offers a variety of health plan design options to fit individual needs. DENTAL INSURANCE: The County provides a comprehensive dental benefit program for regular full-time and part-time employees and their eligible dependents. This plan pays on a set fee schedule that varies by procedure. Any amount over the fee schedule is the employee's responsibility. The yearly maximum is $2,000 per person, not including orthodontia. The orthodontic benefit is 50% of covered charges with a lifetime maximum of $1,000 per person. LIFE INSURANCE: The County of Sacramento provides a basic life insurance benefit of $15,000 to all eligible employees at no cost. Additional coverage may be purchased through payroll deduction. DEFERRED COMPENSATION: The County offers a Deferred Compensation Program which enables employees to save in a systematic way without paying income tax on either the payroll deduction or the earned interest, prior to withdrawal. EMPLOYEE ASSISTANCE PROGRAM: The County of Sacramento provides an Employee Assistance Program (EAP) for employees and their eligible dependents. The EAP offers confidential, professional counseling services in areas such as: Legal Advice/Difficult Decisions Marriage or Family Relationships Financial or Credit Worries/Elder Care Alcohol and Drug Abuse WELLNESS INCENTIVE PROGRAM: The County will recognize and award time off to eligible employees who maintain an excellent attendance record. FLEXIBLE SPENDING ACCOUNT: The County offers regular employees two separate Flexible Spending Accounts (FSA's). These accounts allow employees to set money aside, on a pre-tax basis via payroll deduction, to pay for medical, dental or dependent care expenses. DEPENDENT CARE REIMBURSEMENT ACCOUNT: Employees may set aside pre-tax dollars to pay for qualified childcare or dependent care expenses that are necessary for the employee and/or spouse to continue working. MEDICAL REIMBURSEMENT ACCOUNT: The Medical Reimbursement Account allows pre-tax dollars to be set aside to pay for out-of-pocket expenses that are not paid by insurance or reimbursed by any other benefit plan. WORKERS' COMPENSATION: In case of injury while on the job, each employee is protected under the Workers' Compensation laws of California. SACRAMENTO CREDIT UNION: The credit union offers loan facilities and systematic saving plans through payroll deduction. SELECTION AND PLACEMENT Sacramento County encourages applications from all persons regardless of race, color, ancestry, religious creed, national origin, gender, disability, political affiliation, or age. Certain age limits may be required by law, ordinance, or Civil Service direction for specific classifications such as those identified with hazardous occupations. MINIMUM QUALIFICATIONS: Please read carefully the "Minimum Qualifications" section of your announcement. You must meet those qualifications by the application deadline date unless otherwise specified. Your application must clearly show you meet the minimum qualifications by the application deadline date, or it will not be accepted. All statements are subject to verification. "Experience" means full-time paid experience unless the announcement states that volunteer experience is acceptable. Part-time paid experience may be accumulated and pro-rated to meet the total experience requirements. PROMOTIONAL EXAMINATIONS: If the announcement indicates the examination is given on a promotional basis, candidates must hold permanent status in Sacramento County Civil Service by the application deadline date and must meet the minimum qualifications. OPEN EXAMINATIONS: Any person who meets the minimum qualifications may apply. CONTINUOUS FILING EXAMINATIONS: Applicants are eligible to reapply to and retake a continuous filing exam after 6 months from the date the previous exam results was received. ELIGIBLE LISTS: Names of qualified persons who made a passing score on an examination are entered, in order of their final grades, on an eligible list. To fill each vacancy, the hiring department will make a selection from among the top three ranks on the employment lists. EXAMINATION RATINGS: Unless otherwise stated on the announcement: To be successful, candidates must obtain a rating of at least 70% on each part of the examination. This may be an adjusted score or an arithmetic 70% of the total possible score as determined by the Director. APPEAL PROCESS: Persons who believe their applications have been improperly rejected may request the Employment Services Division to review its decision to reject the application. If the applicant desires to submit additional proof of qualifications, such proof must be received by Personnel Services not less than two (2) calendar days prior to the scheduled date for the examination. Persons who are disqualified in any phase of the examination may appeal such adverse action, in writing, to the Civil Service Commission, 700 H Street, Room 2640, Sacramento, CA 95814, telephone: (916) 874-5586. Such appeals must be filed within thirty (30) calendar days after notice of the adverse action was mailed to the candidate. FOR MORE INFORMATION PLEASE VISIT OUR FREQUENTLY ASKED QUESTIONS (FAQs): https://personnel.saccounty.net/Pages/EmploymentServicesFAQs.aspx OTHER INFORMATION VETERAN'S PREFERENCE: Military veterans who have served during wartime shall be given preference in initial appointment to County service. Such preference shall apply, provided the veteran has first achieved a minimum passing score in the examination. The passing score of a veteran shall be annotated to indicate the veteran's score shall be regarded as 5 points or higher, OR 10 points higher for disabled veterans, only for the purpose of determining the three ranks along with which the veteran's name shall be certified. No score shall actually be changed and no new rank shall be created as a result of application of veteran's preference for certification purposes. "Disabled Veteran" means any veteran who has served during wartime and, who, as of the final filing date for an examination is declared by the United States Veterans Administration or military service department to be 10% or more disabled as a result of his/her military service. Persons claiming eligibility for disabled veteran's preference must submit to the employment office, on or before the application deadline date, a certification from the United States Veterans Administration or a military service department, dated within 1 year, which certifies the present existence of a service related disability of 10% or more, or other acceptable proof of such disability as a result of his/her military service. Persons claiming eligibility for veterans preference must submit a copy of Form DD 214 or other acceptable proof of veteran's status on or before the final filing date for the examination. For purpose of this rule "reserve" status does not constitute active duty. CITIZENSHIP OR AUTHORIZED ALIEN REQUIREMENT: As required by the Immigration Reform and Control Act, all County employees must be United States citizens or aliens lawfully authorized to work in the United States. Proof of citizenship or authorized status will be required prior to appointment. CONFLICT OF INTEREST CODE: Some County Civil Service positions are covered by financial disclosure requirements intended to identify potential conflicts of interest. CONCURRENT EMPLOYMENT: No employee may concurrently occupy more than one County position. SPECIAL SKILL QUALIFICATIONS (WHEN SPECIFIED ON THE APPLICATION): Persons who have special skills required by some (but not all) positions in a class may be certified ahead of others provided that: Such special skills are based on the duties and requirements of the positions and are in conformance with merit system and equal opportunity principles, and The certification of eligibles who possess special skills have been approved by the Civil Service Commission. PRE-EMPLOYMENT MEDICAL EXAMINATION & DRUG TESTING: The County of Sacramento is committed to maintaining a drug and alcohol free workplace. All persons selected for appointment to positions must pass a medical examination and a drug test, administered by the County at no cost to the applicant. DRIVER LICENSE: Possession of a valid California Driver License may be required for some positions. PROBATIONARY PERIOD: Regular positions are subject to a probationary period which is an extension of the selection process. Unless otherwise indicated on the announcement, the probationary period is six (6) months. AGENCY SHOP/FAIR SHARE FEE: Some positions require, as a condition of continued employment, that the person either: 1. Become a union member; 2. Pay a fair share fee to the union; or, 3. Meet specific requirements under which an equivalent amount must be paid to a charity. FINGERPRINTING AND CRIMINAL RECORD CHECKS: Fingerprinting and criminal record checks are required for some positions. Closing Date/Time: 8/1/2024 5:00 PM Pacific
Mar 07, 2024
The Position Come join one of Forbes Magazine's Best Employers! This is a limited continuous filing exam. The filing cut-offs are at 5:00 pm on: 3/27/24, 4/24/24, *5/24/24, *6/24/24, *8/1/24 (final) The Senior Engineering Technician performs a variety of tasks related in the performance of sub-professional engineering office, design assistance, and drafting work, including assisting the professional engineering staff in mechanical, structural, electrical, or instrumentation technical support work; perform engineering support work involving environmental control system operations & maintenance and monitoring labor compliance, traffic usage analysis, plan & map checking, construction administration, drafting, condition compliance and conformance, and issuing permits and determining required fees. Assignments may include responsibility for an ongoing project or program or providing lead direction for the implementation of systems with program or function wide impact. The Senior Engineering Technician may also provide lead direction and exercise control over the work of other assigned staff where the work requirements are well defined and a volume of past practices and precedents exist. The eligible list for this recruitment may be used to fill current and future vacancies. One current vacancy is for a Senior Labor Compliance Technician with the Construction Management and Inspection Division. Duties may include, but are not limited to the following: Administers and monitors the labor compliance requirements for construction contracts. Ensures the proper reporting of prevailing wages, fringe benefits, apprentice utilization and resolution of employee wage violations. Collects and reviews weekly Certified Payroll Reports (CPR's) and supporting payroll records (statement of compliance, fringe benefit statement, payroll deductions, apprentice registration, etc.) submitted by the prime and subcontractors on a weekly basis. Communicates with contractors to resolve discrepancies relative to the CPR submittals. Conducts investigations on alleged contractor violations uncovered from CPR reviews, site visits, workers' complaints, etc. to facilitate contractor compliance and timely contract completion. When appropriate, notifies Department of Industrial Relations and/or Department of Labor of contractor violations. Interprets and enforces all public works contract labor provisions including: DIR registration. Prepares and presents the labor compliance requirements at pre-bid and pre-construction meetings for contracts subject to the payment of prevailing wages. Responds to prevailing wage questions/concerns/matters that may arise from contractors, construction workers, County staff, and other Agencies. Responsible for documenting all prime contractors and subcontractors' responsiveness before releasing project funds and closing out labor compliance files in a timely manner. Examples of Knowledge and Abilities Knowledge of All Options Public works construction principles, practices, methodologies, and techniques Principles of training and work direction General Option Public works contract administration, fee & permit requirements Construction conditions requirements Traffic utilization analysis techniques and practices Labor compliance requirements Related legislative and rules relating to public works construction in the County Design & Drafting Option Specialized engineering support principles and practices utilizing conventional or computer-aided design and drafting techniques applicable to plans, schematics, sketches, and other materials utilized for the construction of public works facilities and structures Computer Specialist Option The principles and practices of the utilization and application of automated equipment and systems to the resolution of engineering related problems, including the knowledge of techniques and procedures for development and modification of software packages in the design, configuration, and implementation of unique solutions to engineering specific problems Geographic information Systems (GIS) Option Knowledge of GIS applications, including the capabilities, limitations, and characteristics ArcInfo computer software Mapping and geoprocessing operations of local government Computer-aided drafting Plan & Map Check Option Principles and practices of public works design and construction, Federal, State, and County improvement standards as they are applied to map and plan checking for conformance to established requirements and standards, including parcel and subdivision criteria Ability to Independently perform specialized assignments requiring extensive knowledge of sub-professional engineering work Represent the County in meetings and conferences with outside consultants, contractors, and other public agencies Provide lead direction Read, speak and write English at a level necessary for satisfactory job performance Employment Qualifications Minimum Qualifications Either : 1. Three years of full-time experience in the class of an Engineering Technician in Sacramento County service. Or : 2. Three years of sub-professional engineering experience involving public works facilities or structures work. Education Substitution: Completion of coursework in engineering or related field at an accredited college or university may be substituted for up to one year of the required experience. Related education substitutions for the required experience are computed on the basis of 3 semester units or 4.5 quarter units = 1 work month. Note: If the word “experience” is referenced in the minimum qualifications, it means full-time paid experience unless the minimum qualification states that volunteer experience is acceptable. Part-time paid experience may be accumulated and pro-rated to meet the total experience requirements. Note: If the minimum qualifications include an educational or certificate/license requirement, applicants must submit proof of requirements with the application. Failure to submit proof of requirements may result in disqualification from the examination. Unofficial transcripts are acceptable. For guidelines on submitting acceptable proof of educational requirements, please click here or speak to someone in our office before the final filing date listed in this notice. Special Requirements License Requirements: Some positions in this series require a valid California Driver's License, Class C or higher at the time of appointment. Note: Failure to maintain the appropriate valid California Driver's License constitutes cause for termination from the class in accordance with Civil Service Rule 11.4. Background Check: Applicants for positions assigned to the Department of Airports are subject to a criminal history record check in accordance with the Federal Aviation Administration, FAR 107.11(f) and Sacramento County Personnel Policies and Procedures. Probationary Period The probationary period for this classification is six (6) months. Application and Testing Information APPLICATION Qualified applicants are encouraged to apply immediately. All applicants must complete and submit an online County of Sacramento employment application by 5:00 PM on the posted cut-off date. Click here to apply. County of Sacramento Department of Personnel Services Employment Services Division 700 H Street, Room 4667 Sacramento, CA 95814 Phone (916) 874-5593; 7-1-1 California Relay Service Email EmployOffice@Saccounty.net Inter-Office Mail Code: 09-4667 www.SacCountyJobs.net Employment applications and all documentation requested in this announcement must be submitted by 5:00 p.m. on the cut-off date. Employment Services is not responsible for any issues or delays caused by an applicant's computer or web browser. Applicants will be automatically logged out if they have not submitted their applications and all documentation prior to 5:00 p.m. on the cut-off date. Your application should highlight all relevant education, training, and experience, and clearly indicate how you meet the minimum qualifications for the position as of the cut-off date. Application information must be current, concise and related to the requirements in this job announcement. You may only apply for this recruitment once. Duplicate and incomplete applications will be disqualified. A resume may be included with your application, however it will not substitute for the information requested on the application. SUPPLEMENTAL QUESTIONNAIRE Applicants are required to provide a full and complete response to each supplemental question. The Supplemental Questionnaire is located in the tab marked "Supplemental Questions". Please be descriptive in your response. Note: Responses of "See Resume" or "See Application", or copy and paste of work experience are not qualifying responses and will not be considered. Supplemental Questionnaires must be submitted by 5:00 p.m. on the cut-off date. Employment Services is not responsible for any issues or delays caused by an applicant's computer or web browser. Applicants will be automatically logged out if they have not submitted their applications and all documentation prior to 5:00 p.m. on the cut-off date. The supplemental questions are designed to elicit specific information regarding a candidate's experience, education, and training. Responses should be consistent with the information on your application and are subject to verification. Please provide place of employment, pertinent dates, and concise, descriptive and detailed information for each question. If a job included responsibilities applicable to several questions, separate the different functions of the job to answer all the questions completely. Resumes or referral to the application or other questionnaire responses will not be accepted in lieu of completing each question. If you have no experience, write "no experience" for the appropriate question. For many individuals, it is more efficient to develop responses to the supplemental questions in a word processing document and then paste them into the final document to be submitted. Changes or corrections to your Supplemental Questionnaire cannot be made once your application packet has been submitted. If the Supplemental Questionnaire is used in the Formula Rate exam, failure to complete all of the questions or incomplete responses will result in a lower score. While scoring the Supplemental Questionnaire, the candidate's application and/or attachments will not be reviewed , therefore, a candidate's responses to the questions should be accurate, thorough, detailed, and complete. FORMULA RATE EXAMINATION (Weighted 100%) All candidates meeting the minimum qualifications by the cut-off date will have their Supplemental Questionnaire scored in the Formula Rate Examination. This examination will evaluate the relevance, level, recency, progression and quality of candidate's education, training and experience. The candidate's application or other materials will not be included in this examination. Therefore, the candidate's responses to the supplemental questionnaire should be thorough, detailed and complete. The score from the Formula Rate Examination will determine the ranking on the eligible/employment list for this job. All candidates competing in the testing process will receive written notice of their examination results by email. Notices can also be accessed in their governmentjobs.com inbox. Applicants achieving a passing score will be placed on the eligible list in rank order. The rank is determined by the test score attained from the examination. FREQUENTLY ASKED QUESTIONS Click here for Frequently Asked Questions (FAQ's) For information regarding County jobs: www.saccountyjobs.net Applicants requesting reasonable accommodations during employment examinations: For more information, please review the Job Applicant Exam Reasonable Accommodation Information and submit an Employment Exam Reasonable Accommodation Online Request Form . EMPLOYEE BENEFITS As an employee of the County of Sacramento, there will be a variety of benefits available to you. These benefits currently include: health, dental and life insurance; flexible spending account options for dependent care and unreimbursed dental and/or medical cost; and an employee assistance program (EAP). GENERAL BENEFITS: Most employee benefits are similar to the following for all County employees. However, some benefits differ, depending on the employee representation unit to which the employee's job classification is assigned. Information about the exact benefits applicable to a particular job classification may be obtained from the Sacramento County Department of Benefits or by visiting www.saccountyjobs.net. TEMPORARY POSITIONS: Most benefits do not apply to temporary positions. The explanations of benefits applies to employees in regular positions. SALARY STEP INCREASES: The beginning salary and the top of the salary range are usually shown on the job announcement. Upon satisfactory service, salary increases of approximately 5% are given annually until the top of the salary range has been attained. PAY: All employees are paid bi-weekly via direct deposit into the employee's bank account. The pay period covers fourteen (14) calendar days, starting on a Sunday and ending on the second Saturday thereafter. Salaries are generally paid on the Friday following the end of the pay period. Employees can set up their direct deposit and access their pay information via Employee Self Service in MySacCounty. VACATION: Generally, vacation with pay begins at 10 days annually. With increase over a period of years, the maximum annual vacation with pay is 25 days. HOLIDAYS: 14.5 holidays per year as recognized. SICK LEAVE: Equivalent to 15 days annually, unlimited accumulation. Upon retirement, unused sick leave is converted to retirement service credit. PARENTAL LEAVE: Entitles a regular County employee, with at least one year of continuous employment, to schedule a paid parental leave of up to 160 hours upon the birth or during the process of an adoption of a minor child. Parental leave shall be approved by the employee's appointing authority, except where the granting of the parental leave request would unduly interfere with or cause severe hardship upon department operations. TUITION REIMBURSEMENT: Dependent upon union agreements, regular County employees may be eligible to receive Tuition Reimbursement. The costs for course tuition/registration fees and required books/supplies are eligible for reimbursement. Tuition reimbursement amounts may vary depending upon union agreement. RETIREMENT: Social Security and Sacramento County Employees' Retirement System coverage. HEALTH INSURANCE: The County offers a variety of health plan design options to fit individual needs. DENTAL INSURANCE: The County provides a comprehensive dental benefit program for regular full-time and part-time employees and their eligible dependents. This plan pays on a set fee schedule that varies by procedure. Any amount over the fee schedule is the employee's responsibility. The yearly maximum is $2,000 per person, not including orthodontia. The orthodontic benefit is 50% of covered charges with a lifetime maximum of $1,000 per person. LIFE INSURANCE: The County of Sacramento provides a basic life insurance benefit of $15,000 to all eligible employees at no cost. Additional coverage may be purchased through payroll deduction. DEFERRED COMPENSATION: The County offers a Deferred Compensation Program which enables employees to save in a systematic way without paying income tax on either the payroll deduction or the earned interest, prior to withdrawal. EMPLOYEE ASSISTANCE PROGRAM: The County of Sacramento provides an Employee Assistance Program (EAP) for employees and their eligible dependents. The EAP offers confidential, professional counseling services in areas such as: Legal Advice/Difficult Decisions Marriage or Family Relationships Financial or Credit Worries/Elder Care Alcohol and Drug Abuse WELLNESS INCENTIVE PROGRAM: The County will recognize and award time off to eligible employees who maintain an excellent attendance record. FLEXIBLE SPENDING ACCOUNT: The County offers regular employees two separate Flexible Spending Accounts (FSA's). These accounts allow employees to set money aside, on a pre-tax basis via payroll deduction, to pay for medical, dental or dependent care expenses. DEPENDENT CARE REIMBURSEMENT ACCOUNT: Employees may set aside pre-tax dollars to pay for qualified childcare or dependent care expenses that are necessary for the employee and/or spouse to continue working. MEDICAL REIMBURSEMENT ACCOUNT: The Medical Reimbursement Account allows pre-tax dollars to be set aside to pay for out-of-pocket expenses that are not paid by insurance or reimbursed by any other benefit plan. WORKERS' COMPENSATION: In case of injury while on the job, each employee is protected under the Workers' Compensation laws of California. SACRAMENTO CREDIT UNION: The credit union offers loan facilities and systematic saving plans through payroll deduction. SELECTION AND PLACEMENT Sacramento County encourages applications from all persons regardless of race, color, ancestry, religious creed, national origin, gender, disability, political affiliation, or age. Certain age limits may be required by law, ordinance, or Civil Service direction for specific classifications such as those identified with hazardous occupations. MINIMUM QUALIFICATIONS: Please read carefully the "Minimum Qualifications" section of your announcement. You must meet those qualifications by the application deadline date unless otherwise specified. Your application must clearly show you meet the minimum qualifications by the application deadline date, or it will not be accepted. All statements are subject to verification. "Experience" means full-time paid experience unless the announcement states that volunteer experience is acceptable. Part-time paid experience may be accumulated and pro-rated to meet the total experience requirements. PROMOTIONAL EXAMINATIONS: If the announcement indicates the examination is given on a promotional basis, candidates must hold permanent status in Sacramento County Civil Service by the application deadline date and must meet the minimum qualifications. OPEN EXAMINATIONS: Any person who meets the minimum qualifications may apply. CONTINUOUS FILING EXAMINATIONS: Applicants are eligible to reapply to and retake a continuous filing exam after 6 months from the date the previous exam results was received. ELIGIBLE LISTS: Names of qualified persons who made a passing score on an examination are entered, in order of their final grades, on an eligible list. To fill each vacancy, the hiring department will make a selection from among the top three ranks on the employment lists. EXAMINATION RATINGS: Unless otherwise stated on the announcement: To be successful, candidates must obtain a rating of at least 70% on each part of the examination. This may be an adjusted score or an arithmetic 70% of the total possible score as determined by the Director. APPEAL PROCESS: Persons who believe their applications have been improperly rejected may request the Employment Services Division to review its decision to reject the application. If the applicant desires to submit additional proof of qualifications, such proof must be received by Personnel Services not less than two (2) calendar days prior to the scheduled date for the examination. Persons who are disqualified in any phase of the examination may appeal such adverse action, in writing, to the Civil Service Commission, 700 H Street, Room 2640, Sacramento, CA 95814, telephone: (916) 874-5586. Such appeals must be filed within thirty (30) calendar days after notice of the adverse action was mailed to the candidate. FOR MORE INFORMATION PLEASE VISIT OUR FREQUENTLY ASKED QUESTIONS (FAQs): https://personnel.saccounty.net/Pages/EmploymentServicesFAQs.aspx OTHER INFORMATION VETERAN'S PREFERENCE: Military veterans who have served during wartime shall be given preference in initial appointment to County service. Such preference shall apply, provided the veteran has first achieved a minimum passing score in the examination. The passing score of a veteran shall be annotated to indicate the veteran's score shall be regarded as 5 points or higher, OR 10 points higher for disabled veterans, only for the purpose of determining the three ranks along with which the veteran's name shall be certified. No score shall actually be changed and no new rank shall be created as a result of application of veteran's preference for certification purposes. "Disabled Veteran" means any veteran who has served during wartime and, who, as of the final filing date for an examination is declared by the United States Veterans Administration or military service department to be 10% or more disabled as a result of his/her military service. Persons claiming eligibility for disabled veteran's preference must submit to the employment office, on or before the application deadline date, a certification from the United States Veterans Administration or a military service department, dated within 1 year, which certifies the present existence of a service related disability of 10% or more, or other acceptable proof of such disability as a result of his/her military service. Persons claiming eligibility for veterans preference must submit a copy of Form DD 214 or other acceptable proof of veteran's status on or before the final filing date for the examination. For purpose of this rule "reserve" status does not constitute active duty. CITIZENSHIP OR AUTHORIZED ALIEN REQUIREMENT: As required by the Immigration Reform and Control Act, all County employees must be United States citizens or aliens lawfully authorized to work in the United States. Proof of citizenship or authorized status will be required prior to appointment. CONFLICT OF INTEREST CODE: Some County Civil Service positions are covered by financial disclosure requirements intended to identify potential conflicts of interest. CONCURRENT EMPLOYMENT: No employee may concurrently occupy more than one County position. SPECIAL SKILL QUALIFICATIONS (WHEN SPECIFIED ON THE APPLICATION): Persons who have special skills required by some (but not all) positions in a class may be certified ahead of others provided that: Such special skills are based on the duties and requirements of the positions and are in conformance with merit system and equal opportunity principles, and The certification of eligibles who possess special skills have been approved by the Civil Service Commission. PRE-EMPLOYMENT MEDICAL EXAMINATION & DRUG TESTING: The County of Sacramento is committed to maintaining a drug and alcohol free workplace. All persons selected for appointment to positions must pass a medical examination and a drug test, administered by the County at no cost to the applicant. DRIVER LICENSE: Possession of a valid California Driver License may be required for some positions. PROBATIONARY PERIOD: Regular positions are subject to a probationary period which is an extension of the selection process. Unless otherwise indicated on the announcement, the probationary period is six (6) months. AGENCY SHOP/FAIR SHARE FEE: Some positions require, as a condition of continued employment, that the person either: 1. Become a union member; 2. Pay a fair share fee to the union; or, 3. Meet specific requirements under which an equivalent amount must be paid to a charity. FINGERPRINTING AND CRIMINAL RECORD CHECKS: Fingerprinting and criminal record checks are required for some positions. Closing Date/Time: 8/1/2024 5:00 PM Pacific