Cal State University (CSU) San Jose
1 Washington Street, San Jose, CA 95192, USA
Job Summary The Lead Carpenter, assigned to the Carpenter Shop within the Maintenance & Operations unit of Facilities Development & Operations, works under general supervision and provides lead direction for journey-level crafts workers and semi-skilled assistants, laying out and coordinating the work flow for the shop, preparing materials lists, and ordering supplies in addition to performing work as a skilled carpenter. Staff within the Carpenter Shop are responsible for a full range of journey-level skilled work in rough and finished skilled carpentry, to ensure a clean, safe, attractive, and well maintained learning environment. The Maintenance & Operations unit of Facilities Development & Operations provides services to a University campus spread across five sites comprised of +170 acres, 52 buildings, and more than six million gross square feet. The Carpenter Shop is one of seven skilled trades shops within Maintenance & Operations and is comprised of a lead carpenter plus three journey-level carpenters and may be assisted by staff in the Facility Worker Shop. The Shop reports up to a Facilities Project Supervisor who provides supervision and guidance. Key Responsibilities Performs as a journey-level carpenter in association with basic and advanced maintenance and repair work Builds, remodels, and maintains various types of facilities, buildings, offices, classrooms, restrooms, sheds, fences and other structures Installs, builds and repaired internal and external structures Installs and repairing drywall, ceiling and floor tiles, and roofs Makes, installs, and repairs cabinets, counters, shelves, benches, partitions, floors, and door and window frames Hangs doors and installation window frames Erecting scaffolding, forms, frames, molds, and/or use electronic lifts or personnel ladders in the performance of duties Installs and repairs modular furniture Reads, interprets, and works from plans, drawings, and specifications Ensures work performed is completed in a manner conforming with plans, specifications, and building code and safety requirements Cleans and maintains materials, tools, and equipment used in the performance of duties Performs all work in accordance with established safety procedures Maintains a clean and safe work environment Work may involve exposure to hazardous materials such as lead and asbestos. Performs abatement, where certified Consults and works with other trades workers Operates power tools, shop and construction equipment typical to the carpentry trade Provides lead work direction to skilled trades staff and semi-skilled and unskilled assistants through the performance of the duties noted below understanding that operational needs vary daily and are based on priorities set by the appropriate administrator Reviews work order system to understand and plan for preventative, deferred, and reactive maintenance work efforts in a manner aligned with the priorities communicated by the appropriate administrator Ensures preventative maintenance and other work orders designated as high priority are completed on schedule Prepares for and plans work including development of material/supply needs lists and ordering supplies through the warehouse and business office so as to pursue the work according to schedule. Ensures adequate and appropriate warehouse stock supplies are on hand Develops rough sketches/diagrams and corresponding cost estimates and projected schedules for communication with the business office and customer Develops labor resource schedules and communicates assignments to assigned workers, making adjustments and coordinating with other shops, where necessary Lays out, directs, assists and coordinates the work flow for assigned work including project planning and coordinating with other shops where necessary Instructs shop members in industry best practices and safety rules through regular shop and safety meetings. Provides instruction and lead direction to unskilled and semi-skilled assistants Inspects completed work for conformance with specifications, requirements, compliance with applicable building and safety codes and regulations Ensures computerized record keeping systems are maintained with all work efforts documented accurately Communicates with customers in a professional manner to keep them informed of work efforts Provides feedback to the appropriate administrator concerning staff work performance including productivity, quality, teamwork, and communication Advises on set-up and layout of the shop as well as the selection, ordering and storage of equipment and supplies. Consults with shop staff to obtain feedback on recommendations Ensures Carpenter Shop and work areas remain neat and tidy at all times and that tools and equipment are properly cared for and stored safely Prepares standard reports, including preparation of as-builts for database updates Acts as shop supervisor in absence of the Facility Project Supervisor Knowledge, Skills & Abilities Thorough knowledge of the methods, materials, tools and equipment used in both rough carpentry and finishes carpentry including knowledge of various types and grades of lumber, and in the use of hand and power carpentry tools Thorough knowledge of the applicable state codes and regulations, including the Safety Orders of the Division of Industrial Safety of the State of California and California Building Codes Working knowledge of effective supervisory practices and techniques and the ability to lead, instruct and coordinate the work of a small group or crew of skilled and semi-skilled workers as well as provide instruction to unskilled and semi-skilled assistants Ability to provide lead work direction including supervising and instructing in the necessary work efforts and safety rules that must be adhered to Ability to make rough sketches, accurately estimate time and costs as well as necessary supplies and materials needed for assigned work, and to ensure work is performed in sequence Ability to build, install, and repair structural woodwork, flooring, ceilings, and cabinetry Ability to operate and maintain hand and power tools typical to the carpentry trade as well as to erect and work from scaffolds, ladders, and personnel lifts Ability to recognize and select appropriate materials for the work assigned including lumber types and grades Developed organizational skills to allow for the establishment of priorities and labor resource assignments to accomplish work within budget and labor resource constraints while meeting the required schedule Working knowledge of practices and procedures of safety and emergency preparedness and ability to respond appropriately to such situations Knowledge and ability to complete work in conformance with drawings, plans, and specifications, requirements and compliance with applicable building and safety codes and regulations. Ability to inspect work performed by others to ensure adherence to requirements and industry practices Ability to ensure shop, equipment, and tools are properly cleaned, maintained, and securely stored with shop being kept neat and tidy at all times Knowledge in the use of computers and technology including email, word processing, and spreadsheets Ability to use enterprise software systems to track work orders, obtain supplies, document work efforts, and maintain records Ability to read and write at a level appropriate to the position; read and interpret blueprints, and perform arithmetic calculations as required to perform the duties assigned Ability to prepare standard reports that may require one to organization information, ideas and concepts in a written or presentation format Ability to learn and maintain knowledge of a variety of state, federal, CSU, and SJSU policies and procedures pertaining to assigned duties Ability to implement a positive customer service approach, with a commitment to high ethical standards, while maintaining focus on solving problems or issues effectively and in a professional manner Ability to communicate effectively and work harmoniously with a diverse group of individuals who are directly or indirectly involved with assignments and projects Ability to foster and participate in a positive, cooperative, productive teamwork focused atmosphere and maintain positive working relationships with a diverse population including those from various backgrounds Ability to understand and embrace priorities for work assignments while also maintaining flexibility to accommodate changes while meeting deadlines despite intermittent interruptions Ability to operationalize sustainability concepts (economic justice, social justice, environmental justice) into all aspects of performing job duties Ability to perform strenuous work in potentially hazardous environments Ability to pass a physical which enables the use of a half-face respirator Possession of a valid California driver’s license and maintain a driving record that allows for the operation of any vehicle or equipment required in the performance of duties Required Qualifications These abilities normally would be acquired through any combination of progressively responsible training and experience which demonstrates achievement of journey-level skills equivalent to that acquired through the completion of a carpenter’s apprenticeship program. Must participate in all OSHA required physicals and examinations. One to two years of experience as a journey-level carpenter that included work coordination responsibilities Valid driver’s license with an appropriate safety record so as to allow operation of assigned equipment in California License A valid driver's license is required for this position. Out of state candidates selected for the position must obtain a State of California driver's license within 10 days of hire in accordance with the California Department of Motor Vehicles regulations. Once hired the employee must successfully complete the Defensive Driver Training Program provided by the State of California for California State University campuses. Preferred Qualifications Possession of a current California asbestos worker certification Possession of a current California lead worker certification Experience in maintenance of a State facility, College or University, or other multi-facility complex Working knowledge of effective supervisory practices and techniques Compensation Classification: Lead Carpenter Anticipated Hiring Range: $7,000/month - $7,205/month CSU Hiring Range: $6,151/month - $7,942/month San José State University offers employees a comprehensive benefits package typically worth 30-35% of your base salary. For more information on programs available, please see the Employee Benefits Summary . Application Procedure Click Apply Now to complete the SJSU Online Employment Application and attach the following documents: Resume Letter of Interest This position is open until filled. Contact Information University Personnel jobs@sjsu.edu 408-924-2252 CSU Vaccination Policy The CSU strongly recommends that all individuals who access any in-person program or activity (on- or off-campus) operated or controlled by the University follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications and comply with other safety measures established by each campus. The system wide policy can be found at https://calstate.policystat.com/policy/9779821/latest/ and questions may be sent to jobs@sjsu.edu . Additional Information Satisfactory completion of a background check (including a criminal records check) is required for employment. SJSU will issue a contingent offer of employment to the selected candidate, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current CSU employee who was offered the position on a contingent basis. The standard background check includes: criminal check, employment and education verification. Depending on the position, a motor vehicle and/or credit check may be required. All background checks are conducted through the university's third party vendor, Accurate Background. Some positions may also require fingerprinting. SJSU will pay all costs associated with this procedure. Evidence of required degree(s) or certification(s) will be required at time of hire. SJSU IS NOT A SPONSORING AGENCY FOR STAFF OR MANAGEMENT POSITIONS. (e.g. H1-B VISAS) All San José State University employees are considered mandated reporters under the California Child Abuse and Neglect Reporting Act and are required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Incumbent is also required to promptly report any knowledge of a possible Title IX related incident to the Title IX Office or report any discrimination, harassment, and/or retaliation to the Office of Equal Opportunity. Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act and Campus Housing Fire Safety Notification: Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act, the Annual Security Report (ASR) is also now available for viewing at https://www.sjsu.edu/clery/docs/SJSU-Annual-Security-Report.pdf. The ASR contains the current security and safety-related policy statements, emergency preparedness and evacuation information, crime prevention and Sexual Assault prevention information, and information about drug and alcohol prevention programming. The ASR also contains statistics of Clery crimes for San José State University locations for the three most recent calendar years. A paper copy of the ASR is available upon request by contacting the Office of the Clery Director by phone at 408-924-1501 or by email at clerycompliance@sjsu.edu . Pursuant to the Higher Education Opportunity Act, the Annual Fire Safety Report (AFSR) is also available for viewing at https://www.sjsu.edu/clery/docs/SJSU-Annual-Fire-Safety-Report.pdf . The purpose of this report is to disclose statistics for fires that occurred within SJSU on-campus housing facilities for the three most recent calendar years, and to distribute fire safety policies and procedures intended to promote safety on Campus. A paper copy of the AFSR is available upon request by contacting the Housing Office by phone at 408-795-5600 or by email at uhs-frontdesk@sjsu.edu . Equal Employment Statement San José State University (SJSU) is an Equal Opportunity/Affirmative Action employer committed to nondiscrimination on the basis of age, ancestry, citizenship status, color, creed, disability, ethnicity, gender, genetic information, marital status, medical condition, national origin, race, religion or lack thereof, sex, sexual orientation, transgender, or protected veteran status consistent with applicable federal and state laws. This policy applies to all SJSU students, faculty and staff programs and activities. Title IX of the Education Amendments of 1972, and certain other federal and state laws, prohibit discrimination on the basis of sex in all education programs and activities operated by the university (both on and off campus). Advertised: Jan 26 2024 Pacific Standard Time Applications close: Closing Date/Time:
Mar 07, 2024
Job Summary The Lead Carpenter, assigned to the Carpenter Shop within the Maintenance & Operations unit of Facilities Development & Operations, works under general supervision and provides lead direction for journey-level crafts workers and semi-skilled assistants, laying out and coordinating the work flow for the shop, preparing materials lists, and ordering supplies in addition to performing work as a skilled carpenter. Staff within the Carpenter Shop are responsible for a full range of journey-level skilled work in rough and finished skilled carpentry, to ensure a clean, safe, attractive, and well maintained learning environment. The Maintenance & Operations unit of Facilities Development & Operations provides services to a University campus spread across five sites comprised of +170 acres, 52 buildings, and more than six million gross square feet. The Carpenter Shop is one of seven skilled trades shops within Maintenance & Operations and is comprised of a lead carpenter plus three journey-level carpenters and may be assisted by staff in the Facility Worker Shop. The Shop reports up to a Facilities Project Supervisor who provides supervision and guidance. Key Responsibilities Performs as a journey-level carpenter in association with basic and advanced maintenance and repair work Builds, remodels, and maintains various types of facilities, buildings, offices, classrooms, restrooms, sheds, fences and other structures Installs, builds and repaired internal and external structures Installs and repairing drywall, ceiling and floor tiles, and roofs Makes, installs, and repairs cabinets, counters, shelves, benches, partitions, floors, and door and window frames Hangs doors and installation window frames Erecting scaffolding, forms, frames, molds, and/or use electronic lifts or personnel ladders in the performance of duties Installs and repairs modular furniture Reads, interprets, and works from plans, drawings, and specifications Ensures work performed is completed in a manner conforming with plans, specifications, and building code and safety requirements Cleans and maintains materials, tools, and equipment used in the performance of duties Performs all work in accordance with established safety procedures Maintains a clean and safe work environment Work may involve exposure to hazardous materials such as lead and asbestos. Performs abatement, where certified Consults and works with other trades workers Operates power tools, shop and construction equipment typical to the carpentry trade Provides lead work direction to skilled trades staff and semi-skilled and unskilled assistants through the performance of the duties noted below understanding that operational needs vary daily and are based on priorities set by the appropriate administrator Reviews work order system to understand and plan for preventative, deferred, and reactive maintenance work efforts in a manner aligned with the priorities communicated by the appropriate administrator Ensures preventative maintenance and other work orders designated as high priority are completed on schedule Prepares for and plans work including development of material/supply needs lists and ordering supplies through the warehouse and business office so as to pursue the work according to schedule. Ensures adequate and appropriate warehouse stock supplies are on hand Develops rough sketches/diagrams and corresponding cost estimates and projected schedules for communication with the business office and customer Develops labor resource schedules and communicates assignments to assigned workers, making adjustments and coordinating with other shops, where necessary Lays out, directs, assists and coordinates the work flow for assigned work including project planning and coordinating with other shops where necessary Instructs shop members in industry best practices and safety rules through regular shop and safety meetings. Provides instruction and lead direction to unskilled and semi-skilled assistants Inspects completed work for conformance with specifications, requirements, compliance with applicable building and safety codes and regulations Ensures computerized record keeping systems are maintained with all work efforts documented accurately Communicates with customers in a professional manner to keep them informed of work efforts Provides feedback to the appropriate administrator concerning staff work performance including productivity, quality, teamwork, and communication Advises on set-up and layout of the shop as well as the selection, ordering and storage of equipment and supplies. Consults with shop staff to obtain feedback on recommendations Ensures Carpenter Shop and work areas remain neat and tidy at all times and that tools and equipment are properly cared for and stored safely Prepares standard reports, including preparation of as-builts for database updates Acts as shop supervisor in absence of the Facility Project Supervisor Knowledge, Skills & Abilities Thorough knowledge of the methods, materials, tools and equipment used in both rough carpentry and finishes carpentry including knowledge of various types and grades of lumber, and in the use of hand and power carpentry tools Thorough knowledge of the applicable state codes and regulations, including the Safety Orders of the Division of Industrial Safety of the State of California and California Building Codes Working knowledge of effective supervisory practices and techniques and the ability to lead, instruct and coordinate the work of a small group or crew of skilled and semi-skilled workers as well as provide instruction to unskilled and semi-skilled assistants Ability to provide lead work direction including supervising and instructing in the necessary work efforts and safety rules that must be adhered to Ability to make rough sketches, accurately estimate time and costs as well as necessary supplies and materials needed for assigned work, and to ensure work is performed in sequence Ability to build, install, and repair structural woodwork, flooring, ceilings, and cabinetry Ability to operate and maintain hand and power tools typical to the carpentry trade as well as to erect and work from scaffolds, ladders, and personnel lifts Ability to recognize and select appropriate materials for the work assigned including lumber types and grades Developed organizational skills to allow for the establishment of priorities and labor resource assignments to accomplish work within budget and labor resource constraints while meeting the required schedule Working knowledge of practices and procedures of safety and emergency preparedness and ability to respond appropriately to such situations Knowledge and ability to complete work in conformance with drawings, plans, and specifications, requirements and compliance with applicable building and safety codes and regulations. Ability to inspect work performed by others to ensure adherence to requirements and industry practices Ability to ensure shop, equipment, and tools are properly cleaned, maintained, and securely stored with shop being kept neat and tidy at all times Knowledge in the use of computers and technology including email, word processing, and spreadsheets Ability to use enterprise software systems to track work orders, obtain supplies, document work efforts, and maintain records Ability to read and write at a level appropriate to the position; read and interpret blueprints, and perform arithmetic calculations as required to perform the duties assigned Ability to prepare standard reports that may require one to organization information, ideas and concepts in a written or presentation format Ability to learn and maintain knowledge of a variety of state, federal, CSU, and SJSU policies and procedures pertaining to assigned duties Ability to implement a positive customer service approach, with a commitment to high ethical standards, while maintaining focus on solving problems or issues effectively and in a professional manner Ability to communicate effectively and work harmoniously with a diverse group of individuals who are directly or indirectly involved with assignments and projects Ability to foster and participate in a positive, cooperative, productive teamwork focused atmosphere and maintain positive working relationships with a diverse population including those from various backgrounds Ability to understand and embrace priorities for work assignments while also maintaining flexibility to accommodate changes while meeting deadlines despite intermittent interruptions Ability to operationalize sustainability concepts (economic justice, social justice, environmental justice) into all aspects of performing job duties Ability to perform strenuous work in potentially hazardous environments Ability to pass a physical which enables the use of a half-face respirator Possession of a valid California driver’s license and maintain a driving record that allows for the operation of any vehicle or equipment required in the performance of duties Required Qualifications These abilities normally would be acquired through any combination of progressively responsible training and experience which demonstrates achievement of journey-level skills equivalent to that acquired through the completion of a carpenter’s apprenticeship program. Must participate in all OSHA required physicals and examinations. One to two years of experience as a journey-level carpenter that included work coordination responsibilities Valid driver’s license with an appropriate safety record so as to allow operation of assigned equipment in California License A valid driver's license is required for this position. Out of state candidates selected for the position must obtain a State of California driver's license within 10 days of hire in accordance with the California Department of Motor Vehicles regulations. Once hired the employee must successfully complete the Defensive Driver Training Program provided by the State of California for California State University campuses. Preferred Qualifications Possession of a current California asbestos worker certification Possession of a current California lead worker certification Experience in maintenance of a State facility, College or University, or other multi-facility complex Working knowledge of effective supervisory practices and techniques Compensation Classification: Lead Carpenter Anticipated Hiring Range: $7,000/month - $7,205/month CSU Hiring Range: $6,151/month - $7,942/month San José State University offers employees a comprehensive benefits package typically worth 30-35% of your base salary. For more information on programs available, please see the Employee Benefits Summary . Application Procedure Click Apply Now to complete the SJSU Online Employment Application and attach the following documents: Resume Letter of Interest This position is open until filled. Contact Information University Personnel jobs@sjsu.edu 408-924-2252 CSU Vaccination Policy The CSU strongly recommends that all individuals who access any in-person program or activity (on- or off-campus) operated or controlled by the University follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications and comply with other safety measures established by each campus. The system wide policy can be found at https://calstate.policystat.com/policy/9779821/latest/ and questions may be sent to jobs@sjsu.edu . Additional Information Satisfactory completion of a background check (including a criminal records check) is required for employment. SJSU will issue a contingent offer of employment to the selected candidate, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current CSU employee who was offered the position on a contingent basis. The standard background check includes: criminal check, employment and education verification. Depending on the position, a motor vehicle and/or credit check may be required. All background checks are conducted through the university's third party vendor, Accurate Background. Some positions may also require fingerprinting. SJSU will pay all costs associated with this procedure. Evidence of required degree(s) or certification(s) will be required at time of hire. SJSU IS NOT A SPONSORING AGENCY FOR STAFF OR MANAGEMENT POSITIONS. (e.g. H1-B VISAS) All San José State University employees are considered mandated reporters under the California Child Abuse and Neglect Reporting Act and are required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Incumbent is also required to promptly report any knowledge of a possible Title IX related incident to the Title IX Office or report any discrimination, harassment, and/or retaliation to the Office of Equal Opportunity. Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act and Campus Housing Fire Safety Notification: Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act, the Annual Security Report (ASR) is also now available for viewing at https://www.sjsu.edu/clery/docs/SJSU-Annual-Security-Report.pdf. The ASR contains the current security and safety-related policy statements, emergency preparedness and evacuation information, crime prevention and Sexual Assault prevention information, and information about drug and alcohol prevention programming. The ASR also contains statistics of Clery crimes for San José State University locations for the three most recent calendar years. A paper copy of the ASR is available upon request by contacting the Office of the Clery Director by phone at 408-924-1501 or by email at clerycompliance@sjsu.edu . Pursuant to the Higher Education Opportunity Act, the Annual Fire Safety Report (AFSR) is also available for viewing at https://www.sjsu.edu/clery/docs/SJSU-Annual-Fire-Safety-Report.pdf . The purpose of this report is to disclose statistics for fires that occurred within SJSU on-campus housing facilities for the three most recent calendar years, and to distribute fire safety policies and procedures intended to promote safety on Campus. A paper copy of the AFSR is available upon request by contacting the Housing Office by phone at 408-795-5600 or by email at uhs-frontdesk@sjsu.edu . Equal Employment Statement San José State University (SJSU) is an Equal Opportunity/Affirmative Action employer committed to nondiscrimination on the basis of age, ancestry, citizenship status, color, creed, disability, ethnicity, gender, genetic information, marital status, medical condition, national origin, race, religion or lack thereof, sex, sexual orientation, transgender, or protected veteran status consistent with applicable federal and state laws. This policy applies to all SJSU students, faculty and staff programs and activities. Title IX of the Education Amendments of 1972, and certain other federal and state laws, prohibit discrimination on the basis of sex in all education programs and activities operated by the university (both on and off campus). Advertised: Jan 26 2024 Pacific Standard Time Applications close: Closing Date/Time:
Cal State University (CSU) San Jose
1 Washington Street, San Jose, CA 95192, USA
Job Summary Under general supervision of the Facilities Project Supervisor, the Carpenter works independently or as a team member to perform the full range of skilled journey-level carpenter work including work from blueprints, specifications, drawings and instructions to build, remodel, maintain and repair various types of facilities, buildings, offices, classrooms, restrooms, sheds, scaffolds, forms, frames, fences and other structures; install, build and repair internal and external structures; install and repair dry wall, ceiling and floor tiles, and roofs; make cabinets, counters, shelves, benches, partitions, floors, and door and window frames; hang doors and install windows; assist in making concrete molds and structures; make rough sketches of repair work; may install and repair modular furniture; advise in the selection and storage of building materials; inspect completed work for conformance with specifications, requirements and compliance with applicable building and safety codes and regulations; inspect related work performed by contractors; estimate cost, time and materials for carpentry projects; participate in the maintenance and operations of a carpentry shop; clean, maintain and service tools and equipment used in the performance of duties; perform all work in accordance with established safety procedures; maintain a safe and clean work environment; maintain records and retrieve data related to work performed using manual and/or computerized record-keeping systems; prepare standard reports; and consult and work with other trades workers. Work may involve exposure to hazardous materials such as lead and asbestos. The incumbent uses a computerized maintenance system to ensure the preventive maintenance program objectives are met and also provides instruction and direction to unskilled or semi-skilled assistants. Knowledge, Skills & Abilities Thorough knowledge of methods, materials, tools and equipment used in both rough and finished carpentry; various types and grades of lumber; hand and power carpentry tools Through knowledge of applicable state safety codes and regulations pertaining to the carpentry trade, including the Safety Orders of the Division of Industrial safety for the state of California and California state building codes Ability to build install and repair structural woodwork, flooring, ceilings and cabinetry; operate and maintain hand and power carpentry tools Ability to operate all applicable tools and equipment necessary to perform skilled trade work Ability to read, interpret and work from blueprints, plans, drawings and specifications Ability to make rough sketches and to estimate the cost, time and materials of assigned work Ability to maintain records and retrieve data related to work performed using manual and computerized record-keeping systems, and to prepare standard reports Ability to provide instruction to unskilled and semi-skilled assistants Ability to analyze and respond appropriately to emergency situations Ability to read and write at a level appropriate to the position, and to perform arithmetic calculations as required by the position Ability to organize assigned work and carry forward assignments based on operational priorities as defined by the appropriate administrator and/or operating guidelines with a focus on efficiently performing duties required to complete assignments successfully and within given deadlines Ability to communicate effectively and work harmoniously with a diverse group of individuals throughout the organization as well as those outside of the organization who are directly or indirectly involved with projects and/or assignments Ability to participate in and successfully complete all assigned training, skill and professional development activities, including the SJSU Defensive Driver Training Program and passing of the course exam Ability to participate in all OSHA required physicals and examinations Ability to operate a motor vehicle, utility cart, scissor lift, boom lift, and forklift (as certified) and other equipment and tools required to successfully complete assignments Required Qualifications Any combination of progressively responsible training and experience which demonstrates achievement of journey-level skills equivalent to that acquired through the completion of a carpenter’s apprenticeship program or progressively responsible experience in the installation, troubleshooting, adjustment, maintenance, and repair of buildings Must participate in all OSHA required physicals and examinations License A valid driver's license is required for this position. Out of state candidates selected for the position must obtain a State of California driver's license within 10 days of hire in accordance with the California Department of Motor Vehicles regulations. Once hired the employee must successfully complete the Defensive Driver Training Program provided by the State of California for California State University campuses. Preferred Qualifications Demonstrated thorough knowledge of the carpentry trade Certification indicating completion of an applicable apprenticeship program in the carpentry trades Possession of a current California asbestos worker certification Possession of a current California lead worker certification Experience in the maintenance of a State facility, College or University or other commercial, multi-facility complex Four years of journey-level work experience in the maintenance, repair, or construction related to carpentry Compensation Classification: Carpenter Anticipated Hiring Range: $6,190/month - $6,569/month CSU Salary Range: $5,787/month - $7,396/month San José State University offers employees a comprehensive benefits package typically worth 30-35% of your base salary. For more information on programs available, please see the Employee Benefits Summary . Application Procedure Click Apply Now to complete the SJSU Online Employment Application and attach the following documents: Resume Letter of Interest All applicants must apply within the specified application period: January 16, 2024 through January 30, 2024 . This position is open until filled; however, applications received after screening has begun will be considered at the discretion of the university. Work Schedule Tuesday - Saturday from 7:30 a.m. - 4:00 p.m. Business needs may occasionally require overtime work including evening and weekend hours in order to ensure assigned tasks and duties are completed as well as to respond to afterhours needs of the campus, including emergencies. Contact Information University Personnel jobs@sjsu.edu 408-924-2252 CSU Vaccination Policy The CSU strongly recommends that all individuals who access any in-person program or activity (on- or off-campus) operated or controlled by the University follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications and comply with other safety measures established by each campus. The system wide policy can be found at https://calstate.policystat.com/policy/9779821/latest/ and questions may be sent to jobs@sjsu.edu . Additional Information Satisfactory completion of a background check (including a criminal records check) is required for employment. SJSU will issue a contingent offer of employment to the selected candidate, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current CSU employee who was offered the position on a contingent basis. The standard background check includes: criminal check, employment and education verification. Depending on the position, a motor vehicle and/or credit check may be required. All background checks are conducted through the university's third party vendor, Accurate Background. Some positions may also require fingerprinting. SJSU will pay all costs associated with this procedure. Evidence of required degree(s) or certification(s) will be required at time of hire. SJSU IS NOT A SPONSORING AGENCY FOR STAFF OR MANAGEMENT POSITIONS. (e.g. H1-B VISAS) All San José State University employees are considered mandated reporters under the California Child Abuse and Neglect Reporting Act and are required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Incumbent is also required to promptly report any knowledge of a possible Title IX related incident to the Title IX Office or report any discrimination, harassment, and/or retaliation to the Office of Equal Opportunity. Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act and Campus Housing Fire Safety Notification: Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act, the Annual Security Report (ASR) is also now available for viewing at https://www.sjsu.edu/clery/docs/SJSU-Annual-Security-Report.pdf. The ASR contains the current security and safety-related policy statements, emergency preparedness and evacuation information, crime prevention and Sexual Assault prevention information, and information about drug and alcohol prevention programming. The ASR also contains statistics of Clery crimes for San José State University locations for the three most recent calendar years. A paper copy of the ASR is available upon request by contacting the Office of the Clery Director by phone at 408-924-1501 or by email at clerycompliance@sjsu.edu . Pursuant to the Higher Education Opportunity Act, the Annual Fire Safety Report (AFSR) is also available for viewing at https://www.sjsu.edu/clery/docs/SJSU-Annual-Fire-Safety-Report.pdf . The purpose of this report is to disclose statistics for fires that occurred within SJSU on-campus housing facilities for the three most recent calendar years, and to distribute fire safety policies and procedures intended to promote safety on Campus. A paper copy of the AFSR is available upon request by contacting the Housing Office by phone at 408-795-5600 or by email at uhs-frontdesk@sjsu.edu . Campus Security Authority - In accordance with the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act (Clery Act) and CSU systemwide policy, this position is subject to ongoing review for designation as a Campus Security Authority. Individuals that are designated as Campus Security Authorities are required to immediately report Clery incidents to the institution and complete Clery Act training as determined by the university Clery Director. Equal Employment Statement San José State University (SJSU) is an Equal Opportunity/Affirmative Action employer committed to nondiscrimination on the basis of age, ancestry, citizenship status, color, creed, disability, ethnicity, gender, genetic information, marital status, medical condition, national origin, race, religion or lack thereof, sex, sexual orientation, transgender, or protected veteran status consistent with applicable federal and state laws. This policy applies to all SJSU students, faculty and staff programs and activities. Title IX of the Education Amendments of 1972, and certain other federal and state laws, prohibit discrimination on the basis of sex in all education programs and activities operated by the university (both on and off campus). Advertised: Jan 16 2024 Pacific Standard Time Applications close: Closing Date/Time:
Mar 07, 2024
Job Summary Under general supervision of the Facilities Project Supervisor, the Carpenter works independently or as a team member to perform the full range of skilled journey-level carpenter work including work from blueprints, specifications, drawings and instructions to build, remodel, maintain and repair various types of facilities, buildings, offices, classrooms, restrooms, sheds, scaffolds, forms, frames, fences and other structures; install, build and repair internal and external structures; install and repair dry wall, ceiling and floor tiles, and roofs; make cabinets, counters, shelves, benches, partitions, floors, and door and window frames; hang doors and install windows; assist in making concrete molds and structures; make rough sketches of repair work; may install and repair modular furniture; advise in the selection and storage of building materials; inspect completed work for conformance with specifications, requirements and compliance with applicable building and safety codes and regulations; inspect related work performed by contractors; estimate cost, time and materials for carpentry projects; participate in the maintenance and operations of a carpentry shop; clean, maintain and service tools and equipment used in the performance of duties; perform all work in accordance with established safety procedures; maintain a safe and clean work environment; maintain records and retrieve data related to work performed using manual and/or computerized record-keeping systems; prepare standard reports; and consult and work with other trades workers. Work may involve exposure to hazardous materials such as lead and asbestos. The incumbent uses a computerized maintenance system to ensure the preventive maintenance program objectives are met and also provides instruction and direction to unskilled or semi-skilled assistants. Knowledge, Skills & Abilities Thorough knowledge of methods, materials, tools and equipment used in both rough and finished carpentry; various types and grades of lumber; hand and power carpentry tools Through knowledge of applicable state safety codes and regulations pertaining to the carpentry trade, including the Safety Orders of the Division of Industrial safety for the state of California and California state building codes Ability to build install and repair structural woodwork, flooring, ceilings and cabinetry; operate and maintain hand and power carpentry tools Ability to operate all applicable tools and equipment necessary to perform skilled trade work Ability to read, interpret and work from blueprints, plans, drawings and specifications Ability to make rough sketches and to estimate the cost, time and materials of assigned work Ability to maintain records and retrieve data related to work performed using manual and computerized record-keeping systems, and to prepare standard reports Ability to provide instruction to unskilled and semi-skilled assistants Ability to analyze and respond appropriately to emergency situations Ability to read and write at a level appropriate to the position, and to perform arithmetic calculations as required by the position Ability to organize assigned work and carry forward assignments based on operational priorities as defined by the appropriate administrator and/or operating guidelines with a focus on efficiently performing duties required to complete assignments successfully and within given deadlines Ability to communicate effectively and work harmoniously with a diverse group of individuals throughout the organization as well as those outside of the organization who are directly or indirectly involved with projects and/or assignments Ability to participate in and successfully complete all assigned training, skill and professional development activities, including the SJSU Defensive Driver Training Program and passing of the course exam Ability to participate in all OSHA required physicals and examinations Ability to operate a motor vehicle, utility cart, scissor lift, boom lift, and forklift (as certified) and other equipment and tools required to successfully complete assignments Required Qualifications Any combination of progressively responsible training and experience which demonstrates achievement of journey-level skills equivalent to that acquired through the completion of a carpenter’s apprenticeship program or progressively responsible experience in the installation, troubleshooting, adjustment, maintenance, and repair of buildings Must participate in all OSHA required physicals and examinations License A valid driver's license is required for this position. Out of state candidates selected for the position must obtain a State of California driver's license within 10 days of hire in accordance with the California Department of Motor Vehicles regulations. Once hired the employee must successfully complete the Defensive Driver Training Program provided by the State of California for California State University campuses. Preferred Qualifications Demonstrated thorough knowledge of the carpentry trade Certification indicating completion of an applicable apprenticeship program in the carpentry trades Possession of a current California asbestos worker certification Possession of a current California lead worker certification Experience in the maintenance of a State facility, College or University or other commercial, multi-facility complex Four years of journey-level work experience in the maintenance, repair, or construction related to carpentry Compensation Classification: Carpenter Anticipated Hiring Range: $6,190/month - $6,569/month CSU Salary Range: $5,787/month - $7,396/month San José State University offers employees a comprehensive benefits package typically worth 30-35% of your base salary. For more information on programs available, please see the Employee Benefits Summary . Application Procedure Click Apply Now to complete the SJSU Online Employment Application and attach the following documents: Resume Letter of Interest All applicants must apply within the specified application period: January 16, 2024 through January 30, 2024 . This position is open until filled; however, applications received after screening has begun will be considered at the discretion of the university. Work Schedule Tuesday - Saturday from 7:30 a.m. - 4:00 p.m. Business needs may occasionally require overtime work including evening and weekend hours in order to ensure assigned tasks and duties are completed as well as to respond to afterhours needs of the campus, including emergencies. Contact Information University Personnel jobs@sjsu.edu 408-924-2252 CSU Vaccination Policy The CSU strongly recommends that all individuals who access any in-person program or activity (on- or off-campus) operated or controlled by the University follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications and comply with other safety measures established by each campus. The system wide policy can be found at https://calstate.policystat.com/policy/9779821/latest/ and questions may be sent to jobs@sjsu.edu . Additional Information Satisfactory completion of a background check (including a criminal records check) is required for employment. SJSU will issue a contingent offer of employment to the selected candidate, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current CSU employee who was offered the position on a contingent basis. The standard background check includes: criminal check, employment and education verification. Depending on the position, a motor vehicle and/or credit check may be required. All background checks are conducted through the university's third party vendor, Accurate Background. Some positions may also require fingerprinting. SJSU will pay all costs associated with this procedure. Evidence of required degree(s) or certification(s) will be required at time of hire. SJSU IS NOT A SPONSORING AGENCY FOR STAFF OR MANAGEMENT POSITIONS. (e.g. H1-B VISAS) All San José State University employees are considered mandated reporters under the California Child Abuse and Neglect Reporting Act and are required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Incumbent is also required to promptly report any knowledge of a possible Title IX related incident to the Title IX Office or report any discrimination, harassment, and/or retaliation to the Office of Equal Opportunity. Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act and Campus Housing Fire Safety Notification: Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act, the Annual Security Report (ASR) is also now available for viewing at https://www.sjsu.edu/clery/docs/SJSU-Annual-Security-Report.pdf. The ASR contains the current security and safety-related policy statements, emergency preparedness and evacuation information, crime prevention and Sexual Assault prevention information, and information about drug and alcohol prevention programming. The ASR also contains statistics of Clery crimes for San José State University locations for the three most recent calendar years. A paper copy of the ASR is available upon request by contacting the Office of the Clery Director by phone at 408-924-1501 or by email at clerycompliance@sjsu.edu . Pursuant to the Higher Education Opportunity Act, the Annual Fire Safety Report (AFSR) is also available for viewing at https://www.sjsu.edu/clery/docs/SJSU-Annual-Fire-Safety-Report.pdf . The purpose of this report is to disclose statistics for fires that occurred within SJSU on-campus housing facilities for the three most recent calendar years, and to distribute fire safety policies and procedures intended to promote safety on Campus. A paper copy of the AFSR is available upon request by contacting the Housing Office by phone at 408-795-5600 or by email at uhs-frontdesk@sjsu.edu . Campus Security Authority - In accordance with the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act (Clery Act) and CSU systemwide policy, this position is subject to ongoing review for designation as a Campus Security Authority. Individuals that are designated as Campus Security Authorities are required to immediately report Clery incidents to the institution and complete Clery Act training as determined by the university Clery Director. Equal Employment Statement San José State University (SJSU) is an Equal Opportunity/Affirmative Action employer committed to nondiscrimination on the basis of age, ancestry, citizenship status, color, creed, disability, ethnicity, gender, genetic information, marital status, medical condition, national origin, race, religion or lack thereof, sex, sexual orientation, transgender, or protected veteran status consistent with applicable federal and state laws. This policy applies to all SJSU students, faculty and staff programs and activities. Title IX of the Education Amendments of 1972, and certain other federal and state laws, prohibit discrimination on the basis of sex in all education programs and activities operated by the university (both on and off campus). Advertised: Jan 16 2024 Pacific Standard Time Applications close: Closing Date/Time:
San Diego State University
5500 Campanile Drive, San Diego, CA 92182, USA
Position Summary The Facilities Project Supervisor coordinates and oversees the in-house trades participation in project work associated with Facilities Services projects as well as with Project Management projects. The incumbent works under the direction of the Assistant Director of Projects and in collaboration with the trades supervisors and personnel, as well as with the Project Manager and Planner, Estimator, and Scheduler for Facilities Services’ projects. Plans and schedules project completion activity to accommodate maintenance work and unforeseeable challenges while managing and meeting customer expectations. This is a full-time (1.0 time-base), benefits eligible, permanent/probationary position. This position is designated non-exempt under FLSA and is eligible for overtime compensation. Standard SDSU work hours are Monday - Friday, 6:00 a.m. to 2:30 p.m., but may vary based on operational needs. The individual hired into this role will work on campus at SDSU in San Diego. Department Summary SDSU Facilities services is a customer service-based organization providing facility maintenance activities through a transparent and deliberate process. It is responsible for the operation, maintenance, repair, renovation, remodel, and alteration activities in support of the academic and research mission of the university. As part of the BFA division, we aim to offer opportunities for advancement and foster an inclusive environment, so all are valued and empowered to thrive. For more information regarding the Facilities Department, click here . Education and Experience Knowledge: Work requires thorough knowledge of methods, materials, tools and equipment used in the building and construction trades; effective supervisory practices and techniques; job design and work sequencing related to construction projects; and applicable state and federal safety, building and construction codes and regulations. Abilities: Must possess journey-level skill in a building or construction trade. Must be able to operate all applicable building tools and equipment; plan and direct the work of skilled crafts workers and their assistants; determine and coordinate staffing, material and equipment needs for multiple jobs and projects; perform basic design work; read blueprints; work from plans and specifications; prepare rough sketches; analyze and respond appropriately to emergency situations; ensure accuracy and maintenance of assigned record-keeping systems; prepare reports; read and write at a level appropriate for the position; and perform arithmetic calculations as required by the position. Incumbents may be required to possess a California Driver’s License valid for the operation of any vehicle or equipment they are required to maintain and operate. Experience: These abilities normally would be acquired through two years of experience working as a journey- level crafts worker in one or more building trades including one year in a lead/supervisory capacity. Must have demonstrated achievement of journey-level skills equivalent to those acquired through the completion of an applicable apprenticeship program. Licenses and/or Certifications Valid California Driver’s License or have the ability to obtain one within 10 days of hire. Key Qualifications Five years documented journey-level experience with two years in a supervisory capacity is preferred. Bachelor's degree in a construction related field, such as construction science, architecture, construction engineering, and/or experience as a contractor, carpenter, mason, or other skilled trade work is preferred. Demonstrated knowledge of and experience in the application of construction methodologies, including the ability to interpret multi-trade construction documents. Thorough knowledge of current applicable state and federal regulations, including the Safety Orders of the Division of Industrial Safety for the State of California and California State Building Codes, and appropriate references of Cal OSHA and Federal OSHA. Compensation and Benefits Starting salary upon appointment is not expected to exceed $8,000 per month. Salary placement is determined by the education, experience, and qualifications the candidate brings to the position, internal equity, and the hiring department’s fiscal resources. San Diego State University offers a rich benefits package that constitutes a major portion of total compensation. For more information regarding SDSU benefits, please click here . CSU Classification Salary Range: $7,170 - $9,088 per month. Diversity and Community at SDSU At SDSU, our diversity gives us power and benefits every single member of our community. Through our commitment to equity and inclusion, we encourage all members of our community to purposefully learn from one another through open and respectful dialogue and responsible engagement. For more information, click here . Principles of Community At San Diego State University, we are a community of diverse individuals who have and represent many perspectives, beliefs and identities. This diversity lends our community strength, and we commit to creating and sustaining an inclusive and intellectually vibrant environment that benefits all members of our university. SDSU’s Principles of Community is an aspirational statement that is intended to evolve over time. The statement reflects the ideals we are encouraged to uphold in our interactions with one another. Supplemental Information Initial review of the required application materials, including cover letters and resumes, will begin on February 16, 2024. To receive full consideration, apply by February 15, 2024. The position will remain open until filled. The person holding this position is considered a ‘mandated reporter’ under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. San Diego State University is not a sponsoring agency for staff or management positions (e.g., H-1B visa). Applicants must currently be authorized to work in the United States on a full-time basis. Offers of employment are contingent upon the presentation of documents that demonstrate a person's identity and authorization to work in the United States, which are consistent with the provisions of the Immigration Reform and Control Act. A background check (including a criminal records check) must be completed satisfactorily and is required for employment. SDSU will make a conditional offer of employment, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current SDSU employee who was conditionally offered the position. SDSU is a smoke-free campus. For more information, please click here . SDSU is an Equal Opportunity Employer that considers all qualified candidates for employment and does not discriminate on the basis of race, religion, color, ancestry, age, disability, genetic information, gender, gender identity, gender expression, marital status, medical condition, national origin, sex, sexual orientation, covered military and veteran status, or any other protected characteristic or status. Reasonable accommodations will be provided for qualified applicants with disabilities who request an accommodation by contacting Michelle Puentes at mpuentes2@sdsu.edu Advertised: Feb 02 2024 Pacific Standard Time Applications close: Closing Date/Time:
Mar 07, 2024
Position Summary The Facilities Project Supervisor coordinates and oversees the in-house trades participation in project work associated with Facilities Services projects as well as with Project Management projects. The incumbent works under the direction of the Assistant Director of Projects and in collaboration with the trades supervisors and personnel, as well as with the Project Manager and Planner, Estimator, and Scheduler for Facilities Services’ projects. Plans and schedules project completion activity to accommodate maintenance work and unforeseeable challenges while managing and meeting customer expectations. This is a full-time (1.0 time-base), benefits eligible, permanent/probationary position. This position is designated non-exempt under FLSA and is eligible for overtime compensation. Standard SDSU work hours are Monday - Friday, 6:00 a.m. to 2:30 p.m., but may vary based on operational needs. The individual hired into this role will work on campus at SDSU in San Diego. Department Summary SDSU Facilities services is a customer service-based organization providing facility maintenance activities through a transparent and deliberate process. It is responsible for the operation, maintenance, repair, renovation, remodel, and alteration activities in support of the academic and research mission of the university. As part of the BFA division, we aim to offer opportunities for advancement and foster an inclusive environment, so all are valued and empowered to thrive. For more information regarding the Facilities Department, click here . Education and Experience Knowledge: Work requires thorough knowledge of methods, materials, tools and equipment used in the building and construction trades; effective supervisory practices and techniques; job design and work sequencing related to construction projects; and applicable state and federal safety, building and construction codes and regulations. Abilities: Must possess journey-level skill in a building or construction trade. Must be able to operate all applicable building tools and equipment; plan and direct the work of skilled crafts workers and their assistants; determine and coordinate staffing, material and equipment needs for multiple jobs and projects; perform basic design work; read blueprints; work from plans and specifications; prepare rough sketches; analyze and respond appropriately to emergency situations; ensure accuracy and maintenance of assigned record-keeping systems; prepare reports; read and write at a level appropriate for the position; and perform arithmetic calculations as required by the position. Incumbents may be required to possess a California Driver’s License valid for the operation of any vehicle or equipment they are required to maintain and operate. Experience: These abilities normally would be acquired through two years of experience working as a journey- level crafts worker in one or more building trades including one year in a lead/supervisory capacity. Must have demonstrated achievement of journey-level skills equivalent to those acquired through the completion of an applicable apprenticeship program. Licenses and/or Certifications Valid California Driver’s License or have the ability to obtain one within 10 days of hire. Key Qualifications Five years documented journey-level experience with two years in a supervisory capacity is preferred. Bachelor's degree in a construction related field, such as construction science, architecture, construction engineering, and/or experience as a contractor, carpenter, mason, or other skilled trade work is preferred. Demonstrated knowledge of and experience in the application of construction methodologies, including the ability to interpret multi-trade construction documents. Thorough knowledge of current applicable state and federal regulations, including the Safety Orders of the Division of Industrial Safety for the State of California and California State Building Codes, and appropriate references of Cal OSHA and Federal OSHA. Compensation and Benefits Starting salary upon appointment is not expected to exceed $8,000 per month. Salary placement is determined by the education, experience, and qualifications the candidate brings to the position, internal equity, and the hiring department’s fiscal resources. San Diego State University offers a rich benefits package that constitutes a major portion of total compensation. For more information regarding SDSU benefits, please click here . CSU Classification Salary Range: $7,170 - $9,088 per month. Diversity and Community at SDSU At SDSU, our diversity gives us power and benefits every single member of our community. Through our commitment to equity and inclusion, we encourage all members of our community to purposefully learn from one another through open and respectful dialogue and responsible engagement. For more information, click here . Principles of Community At San Diego State University, we are a community of diverse individuals who have and represent many perspectives, beliefs and identities. This diversity lends our community strength, and we commit to creating and sustaining an inclusive and intellectually vibrant environment that benefits all members of our university. SDSU’s Principles of Community is an aspirational statement that is intended to evolve over time. The statement reflects the ideals we are encouraged to uphold in our interactions with one another. Supplemental Information Initial review of the required application materials, including cover letters and resumes, will begin on February 16, 2024. To receive full consideration, apply by February 15, 2024. The position will remain open until filled. The person holding this position is considered a ‘mandated reporter’ under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. San Diego State University is not a sponsoring agency for staff or management positions (e.g., H-1B visa). Applicants must currently be authorized to work in the United States on a full-time basis. Offers of employment are contingent upon the presentation of documents that demonstrate a person's identity and authorization to work in the United States, which are consistent with the provisions of the Immigration Reform and Control Act. A background check (including a criminal records check) must be completed satisfactorily and is required for employment. SDSU will make a conditional offer of employment, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current SDSU employee who was conditionally offered the position. SDSU is a smoke-free campus. For more information, please click here . SDSU is an Equal Opportunity Employer that considers all qualified candidates for employment and does not discriminate on the basis of race, religion, color, ancestry, age, disability, genetic information, gender, gender identity, gender expression, marital status, medical condition, national origin, sex, sexual orientation, covered military and veteran status, or any other protected characteristic or status. Reasonable accommodations will be provided for qualified applicants with disabilities who request an accommodation by contacting Michelle Puentes at mpuentes2@sdsu.edu Advertised: Feb 02 2024 Pacific Standard Time Applications close: Closing Date/Time:
New York State Office of Parks, Recreation & Historic Preservation
New York, New York, United States
Minimum Qualifications One year of trade experience subsequent to the completion of an apprenticeship or equivalent training and experience such as that required for a Trades Specialist (Carpenter), Trades Specialist (Electrician), Service & Repair Mechanic (Electronics), Trades Generalist, Grounds Construction Supervisor, Trades Specialist (Locksmith), Trades Specialist (Machinist), Trades Specialist (Mason and Plasterer), Service and Repair Mechanic (Motor Equipment), Trades Specialist (Painter), Trades Specialist (Plumber & Steamfitter), Service and Repair Mechanic (HVAC-R), Trades Specialist (Roofing), or Trades Specialist (Welder). Duties Description Under the direction of the Park Manager or a higher-level manager, the selected candidate will be a working supervisor involved in all aspects of maintaining and repairing park buildings, utility systems, and grounds. Typical assignments include but are not limited to: • Overseeing and coordinating the activities of a variety of permanent and seasonal skilled, semi-skilled, and unskilled staff engaged in a broad range of park maintenance and repair work, which may include skilled trades work, as well as housekeeping and groundskeeping functions at Roberto Clemente State Park or the filter plant pool operations. • Planning and laying out work, assigning staff, providing instruction and assistance, coordinating among work teams, actively supervising and inspecting work in progress and upon completion. • Preparing written reports in response to specific assignments, work orders, attendance reports, and other assignments as needed including pool water tests and pool logs. o Taking water samples from the various pools at the park, treat, repair, and backwash the systems as needed - Wade Pool, Spray Pad, Dive Pool and Main Pool. • Taking the lead in emphasizing health and safety guidelines, modeling and enforcing all Agency policies, providing training and orientation of new staff, and formally evaluating the performance of all staff under their supervision. • Perform other duties as assigned. Additional Comments OPERATING NEEDS: • Must possess and maintain a valid drivers license that allows the candidate to legally operate a motor vehicle in New York State as a term and condition of employment. • This position is 40 hours per week. Weekend, holiday, and evening work is required as operational needs. • Candidates must be well versed in local building codes, reading diagrams and understanding building plans. • The incumbent will be required to successfuly complete the agency’s Pool Operator Training by the within the probationary period. • Must have excellent communication and problem-solving skills. • Must be proficient in Microsoft Excel, Word, and Outlook. • Bilingual candidates are encouraged to apply. • Candidates may be required to report to other facilities throughout the NYC region an as-needed basis. DOWNSTATE ADJUSTMENT: $3,400 BENEFITS: Generous benefits package, worth approximately 65% of salary, including: Paid Time Off: • CSEA: 44 days - 13 Vacation days, 13 Sick days, and 5 Personal Leave days, 13 Holidays • Three (3) days of professional leave annually to participate in professional development Health Care Benefits: • Eligible employees and dependents can pick from a variety of affordable health insurance programs • Family dental and vision benefits at no additional cost Additional Benefits: • New York State Employees’ Retirement System (ERS) Membership • NYS Deferred Compensation • Access to NY 529 and NY ABLE College Savings Programs, as well as U.S. Savings Bonds • Public Service Loan Forgiveness (PSLF) • Paid Parental / Family Leave To learn more about our benefits, visit: https://parks.ny.gov/employment/benefits.aspx Some positions may require additional credentials or a background check to verify your identity. Closing Date/Time: 05/09/24
Apr 25, 2024
Full Time
Minimum Qualifications One year of trade experience subsequent to the completion of an apprenticeship or equivalent training and experience such as that required for a Trades Specialist (Carpenter), Trades Specialist (Electrician), Service & Repair Mechanic (Electronics), Trades Generalist, Grounds Construction Supervisor, Trades Specialist (Locksmith), Trades Specialist (Machinist), Trades Specialist (Mason and Plasterer), Service and Repair Mechanic (Motor Equipment), Trades Specialist (Painter), Trades Specialist (Plumber & Steamfitter), Service and Repair Mechanic (HVAC-R), Trades Specialist (Roofing), or Trades Specialist (Welder). Duties Description Under the direction of the Park Manager or a higher-level manager, the selected candidate will be a working supervisor involved in all aspects of maintaining and repairing park buildings, utility systems, and grounds. Typical assignments include but are not limited to: • Overseeing and coordinating the activities of a variety of permanent and seasonal skilled, semi-skilled, and unskilled staff engaged in a broad range of park maintenance and repair work, which may include skilled trades work, as well as housekeeping and groundskeeping functions at Roberto Clemente State Park or the filter plant pool operations. • Planning and laying out work, assigning staff, providing instruction and assistance, coordinating among work teams, actively supervising and inspecting work in progress and upon completion. • Preparing written reports in response to specific assignments, work orders, attendance reports, and other assignments as needed including pool water tests and pool logs. o Taking water samples from the various pools at the park, treat, repair, and backwash the systems as needed - Wade Pool, Spray Pad, Dive Pool and Main Pool. • Taking the lead in emphasizing health and safety guidelines, modeling and enforcing all Agency policies, providing training and orientation of new staff, and formally evaluating the performance of all staff under their supervision. • Perform other duties as assigned. Additional Comments OPERATING NEEDS: • Must possess and maintain a valid drivers license that allows the candidate to legally operate a motor vehicle in New York State as a term and condition of employment. • This position is 40 hours per week. Weekend, holiday, and evening work is required as operational needs. • Candidates must be well versed in local building codes, reading diagrams and understanding building plans. • The incumbent will be required to successfuly complete the agency’s Pool Operator Training by the within the probationary period. • Must have excellent communication and problem-solving skills. • Must be proficient in Microsoft Excel, Word, and Outlook. • Bilingual candidates are encouraged to apply. • Candidates may be required to report to other facilities throughout the NYC region an as-needed basis. DOWNSTATE ADJUSTMENT: $3,400 BENEFITS: Generous benefits package, worth approximately 65% of salary, including: Paid Time Off: • CSEA: 44 days - 13 Vacation days, 13 Sick days, and 5 Personal Leave days, 13 Holidays • Three (3) days of professional leave annually to participate in professional development Health Care Benefits: • Eligible employees and dependents can pick from a variety of affordable health insurance programs • Family dental and vision benefits at no additional cost Additional Benefits: • New York State Employees’ Retirement System (ERS) Membership • NYS Deferred Compensation • Access to NY 529 and NY ABLE College Savings Programs, as well as U.S. Savings Bonds • Public Service Loan Forgiveness (PSLF) • Paid Parental / Family Leave To learn more about our benefits, visit: https://parks.ny.gov/employment/benefits.aspx Some positions may require additional credentials or a background check to verify your identity. Closing Date/Time: 05/09/24
City of Sacramento, CA
Sacramento, California, United States
THE POSITION With supervisor approval, incumbents may be eligible for intermittent remote work; however, they must physically reside within the Sacramento region or have the ability to regularly report to a City of Sacramento physical worksite with little notice. The City of Sacramento Community Development Department is seeking a Building Inspector to join the Building Division’s addressing team. This position works on assigning and managing street names and numerical addresses for parcels of land and buildings. Working with a dedicated team, the position will coordinate with multiple city departments and outside agencies on street and address information for new and existing buildings, lots, streets, and alleys. This position will perform research, process address requests, assign addresses, and assist citizens, businesses, and developers on address-related questions. IDEAL CANDIDATE STATEMENT The ideal candidate will possess excellent customer service and interpersonal abilities, keen attention to detail, and the ability to solve problems. The ideal candidate should have experience reading plans of various construction types and designated occupancy groups. The ideal candidate is able to work independently and use good judgement to make decisions on addresses. BUILDING INSPECTOR I/ BUILDING INSPECTOR II/ BUILDING INSPECTOR III DEFINITION To perform rule specific inspection activities in the review of plans and inspections of new building projects, alterations, and repairs, to enforce a variety of codes, ordinances, and established standards to achieve compliance, and to perform other duties and responsibilities as required. Depending on qualifications, incumbents may be assigned to any one, or any combination of inspection discipline areas as: Building Specialty Inspection Plumbing/Mechanical Specialty Inspection Electrical Specialty Inspection Roofing Combination Inspection Residential Combination Inspection Multi-Family Residential and Light Commercial Combination Inspection Residential Combination & Structural Plan Review Non-Structural Building Plan Review Plumbing/Mechanical Plan Review Electrical Plan Review Project Management Enforcement Case Management Building Specialty Inspection assignments concern inspections of residential and commercial construction and applicable methods, practices, materials, codes, ordinances and policies used in construction work as related to building construction. Plumbing/Mechanical Specialty Inspection assignments concern inspections of residential and commercial construction and applicable methods, practices, materials, codes, ordinances and policies used in construction work as related to plumbing and mechanical construction. Electrical Specialty Inspection assignments concern inspections of residential and commercial construction and applicable methods, practices, materials, codes, ordinances and policies used in construction work as related to electrical construction. Roofing Combination Inspection assignments concern inspections on roofing installations on one and two family residences, multi- family and commercial buildings, including building, plumbing, mechanical, and electrical inspections, incidental to the roofing work. Residential Combination Inspection assignments concern inspections on building, plumbing, mechanical, electrical, and roofing installations on one, two, and three family residences for conformance with applicable codes and ordinances. Multi-Family Residential and Light Commercial Combination Inspection assignments concern inspections on building, plumbing, mechanical, electrical, and roofing installations on specific types of building permits for multi-family and commercial buildings qualifying for inspections by Light Commercial Inspectors. Residential Combination & Structural Plan Review assignments concern the review of all building plans and supporting materials for one, two, and three family dwellings, and the acceptance and review of building permits to ensure compliance with various codes, ordinances, and policies; responsible for the preparation of correction notices defining plan deficiencies. Inspects all work, including the most complex installations to support fast track construction and assists with other inspections, including combination inspections. Non-Structural Building Plan Review assignments concern the review of the more complex building plans and supporting materials for commercial and multi-family buildings, and the acceptance and review of building permits to ensure compliance with various codes, ordinances and policies, responsible for the preparation of correction notices defining plan deficiencies; inspects all work, including the most complex installations to support fast track construction, and assists with other inspections disciplines as they relate to non-structural building plan review and construction. Plumbing/Mechanical Plan Review assignments concern the review of all building plans and supporting materials for plumbing and mechanical installations, and the acceptance and review of building permits to ensure compliance with various codes, ordinances and policies; responsible for the preparation of correction notices defining plan deficiencies; inspects all work, including the most complex installations to support fast track construction and assists with other inspection disciplines as they relate to plumbing and mechanical plan review installations. Electrical Plan Review assignments concern the review of all building plans and supporting materials for electrical installations, and the acceptance and review of building permits to ensure compliance with various codes, ordinances and policies; responsible for the preparation of correction notices defining plan deficiencies; inspects all work, including the most complex installations to support fast track construction, and assists with other inspection disciplines as they relate to electrical plan review and installations. Project Management assignments concern the development and administration of contracts for the construction or plan review of facilities, and the inspection of construction to ensure compliance with plans and specifications, and the management and coordination of City or private venture projects. Projects are managed and coordinated from conception through completion. In addition, Project Management assignments assist the project team by coordinating and expediting project approval, plan review, permit issuance, and inspections functions with various departments and agencies. Enforcement Case Management assignments concern complaint investigations for determination of code deficiencies, not necessarily related to active construction; management of contracts to demolish or repair structures with identified deficiencies, and coordination with various organizations and agencies in managing cases. DISTINGUISHING CHARACTERISTICS The Building Inspector class levels are distinguished by the number of inspection disciplines an inspector is recognized to be qualified in based on certification and demonstrable abilities. Positions in this class are flexibly staffed and are automatically flexed to the higher level upon completion of required experience and certification as established per the discipline being flexed to. Appointment to the higher class requires that the employee be performing the full range of duties for the class and meet the qualification standards for the class. Building Inspector I is the entry-level classification in the building inspection series requiring skill and knowledge in any one inspection discipline as illustrated. Incumbents may be assigned to perform the less difficult or complex work in other disciplines as required. Building Inspector II is distinguished from Building Inspector I, in that the former requires the performance of complex duties within two inspection disciplines as illustrated. Incumbents may be assigned to perform the less difficult or complex work in other disciplines as required. Building Inspector III is distinguished from Building Inspector I and II that it requires the incumbent to perform complex duties within three inspection disciplines as illustrated. Incumbents may be assigned to perform the less difficult or complex work in other disciplines as required. Building Inspector I, II, and III is distinguished from Building Inspector IV, by the latter requiring the incumbent to perform complex duties within four inspection disciplines. SUPERVISION RECEIVED AND EXCERCISED Direct and lead supervision is provided by a Supervising Building Inspector or higher-level management personnel. ESSENTIAL DUTIES AND RESPONSIBILITIES - Identify and enforce a variety of codes, ordinances, and standards violations for conformance with plans and specifications. - Inspect workmanship and materials in building construction projects for conformance with plans and specifications, and inspect potentially substandard or dangerous buildings. - Work with diagrams, specifications, plans, and similar documents. - Read and interpret building construction and engineering plan specifications and codes. - Prepare and maintain reports. - Confer with, and assist architects, engineers, contractors, builders, homeowners, tenants and the general public in the field and office; explain and interpret requirements and restrictions, keep records and prepare reports as necessary. - Enter information into the Automated Permit System and the computer for word processing, calendaring, and electronic mail. - Perform basic plan review, routing and project management activities, issue permits, and fee calculations. - Identify illegal construction activity and issues violation notices. - May perform case or project management activities. - Other duties may be performed, not all duties may be performed by each individual holding this classification. QUALIFICATIONS Knowledge of: - Methods, practices, and materials used in construction work relating to a particular inspection discipline. - Proper inspection techniques to examine workmanship and materials. - Data entry and information retrieval from various computer systems necessary for duties. - Safety rules, regulations and practices applied to construction areas and office spaces. - Codes, ordinances, and policies applicable to a particular inspection discipline(s). Ability to: - Read and write the English language at a level of proficiency necessary for effective job performance. - Apply technical knowledge and follow proper inspection techniques to examine workmanship and materials. - Recognize correct installations of building systems; detect defects and faults in construction workmanship and materials. - Detect deviations from plans, regulations, and read and interpret building construction and engineering plans, specifications, and codes. - Understand diagrams, specifications, plans, and similar documents at a level necessary for efficient job performance. - Establish and maintain effective working relationships with staff, engineers, architects, contractors, tenants, owners, and the general public. - Operate a motor vehicle. - Operate a personal computer and other electronic equipment, including field entry devices and cellular phone. - Lift, carry, push, tools, equipment, supplies and plans weighing up to 50 pounds. - Work within confined spaces, climb ladders, work around power and noise producing equipment, work in confined spaces requiring reaching, twisting, turning, kneeling, bending, stooping, squatting, and crouching. - Work in all weather conditions including wet, hot, cold and windy. - Access construction areas within construction sites. Ability to: - Work on uneven work surfaces, trenches, slopes, roof structures, framing, and other conditions found in a construction environment. - Serve on-call, work after hours, weekends and holidays, during emergency situations, and as required. - Anticipate issues and seek resolution through various resources. - Provide service to all customers with a professional and sincere attitude; be customer service oriented. EDUCATION AND EXPERIENCE: Any combination equivalent to experience and education that could likely provide the required knowledge and abilities would be qualifying. A typical way to obtain the knowledge and abilities would be: EDUCATION: Equivalent to the completion of the 12th grade. -AND_ EXPERIENCE: One year of experience performing building inspection work within one or more inspection disciplines for a municipal or county government agency, or three years of journey level experience in the building construction field as a plumber, electrician, carpenter, roofer, or closely related field, within the discipline(s) applied. -OR- EDUCATION: Completion of 21 units of college level courses in building inspection, construction, or other related areas and possession of a certification issued by the I.C.C. or other approved certifying organization in the building construction or plans examiner fields -AND- EXPERIENCE: One year of experience performing a variety of paraprofessional/technical work related to plan checking and inspections. PROOF OF EDUCATION Should education be used to qualify for this position, then proof of education such as, but not limited to, university/college transcripts and degrees should be submitted with your application and will be required at the time of appointment . Unofficial documents and/or copies are acceptable. An applicant with a college degree obtained outside the United States must have education records evaluated by a credentials evaluation service. Evaluation of education records will be due at time of appointment. PROOF OF CERTIFICATION Should certification and/or license be used to qualify for this position, then proof of said certification and /or license should be submitted with your application and will be required at the time of appointment . SPECIAL QUALIFICATIONS DRIVER LICENSE: Possession of a valid California Class C Driver License is required at the time of appointment. Individuals who do not meet this requirement due to a physical disability will be considered for accommodation on a case by case basis. CERTIFICATION: Incumbents must possess certification from an approved certifying organization in their specific work discipline(s) and obtain recognition of competency within one year of appointment. Maintenance of required certifications is a condition for continued employment in this classification. PROBATIONARY PERIOD Employees must complete twelve (12) months of probation at a satisfactory performance level prior to gaining permanent status. In addition, incumbents in each inspection discipline must have the following knowledge, abilities, and experience and/or certification as outlined per discipline. Once appointed, inspectors may qualify and perform work in other disciplines. Building Specialty Inspection, Plumbing/Mechanical Specialty Inspection, or Electrical Specialty Inspection Knowledge of: - Methods, practices, codes, ordinances, policies, and materials used in construction work as it relates to the specialty area, and applies to both residential and commercial construction. Ability to: - Inspect all work, including the more complex or difficult installations within the specialty. Experience and Certification: - Three years of experience as a journey-level craft person in the specialty area, or a closely related discipline, and a working knowledge of building construction. - Certification by I.C.C. or other approved certifying organization in the appropriate specialty categories. - Recognition by the Chief Building Official of the competency to perform both residential and commercial building inspections. Roofing Combination Inspection Knowledge of: - Methods, practices, and materials used in roofing as applied to both residential and commercial construction. - Codes, ordinances and policies that are applied to roofing and all other disciplines that are incidental to roofing work. Ability to: - Recognize correct installation of roofing systems. - Inspect all work, including the more complex and difficult roofing systems. Experience and Certification: - Three years of experience as a journey-level crafts person in the roofing discipline, or a closely related discipline, and working knowledge of roofing construction, including all incidental disciplines associated with roofs. - Certification by I.C.C. or other approved certifying organization as a Building Inspector. - Completion of an approved testing or training program in combination roofing inspection. - Recognition by the Chief Building Official of the competency to perform both residential and commercial inspections within the specialty. Residential Combination Inspection Knowledge of: - Methods, practices, codes, ordinances, policies, and materials used in construction work applied to one, two, and three family residential construction. Ability to: - Recognize correct installation of building, plumbing and mechanical, electrical and roofing systems. Experience and Certification: - Certification by I.C.C. or other certifying organization in Combination - Dwelling Inspector and completion of an approved testing Program. - One year as a Building Inspector for another municipal or county government agency performing residential combination inspections. - Recognition by the Chief Building Official of the competency to perform residential combination inspections. -OR- - Completion of a formalized City training Program in residential combination inspections. Renewal of city certification required every three years. - Recognition by the Chief Building Official of the competency to perform residential combination inspections. Multi-Family Residential and Light Commercial Combination Inspection Knowledge of: - Methods, practices, codes, ordinances, policies, and materials used in construction work applied to multi-family and commercial buildings qualifying for inspection by Light Commercial Inspectors. Ability to: - Recognize correct installation of building, plumbing and mechanical, electrical and roofing systems as applied to multi- family and commercial buildings qualifying for inspection by Light Commercial Inspectors. Certification: - Certification by I.C.C. or other approved certifying organization in Commercial Combination Inspections, or Building Inspector, Mechanical Inspector, Plumbing Inspector, and Electrical Inspector. - Completion of an approved testing or formalized training program in Commercial Combination Inspections. - Recognition by the Chief Building Official of the competency to perform multi-family residential and light commercial inspections. Residential Combination & Structural Plan Review Knowledge of: - Standard construction drawings, plans, specifications, methods and materials applied to one, two, and three family residential structures. - Codes, ordinances, and policies that apply to Plumbing/Mechanical, electrical, and structural. - Methods and formulas for calculating various development fees. - Automated systems for tracking permits, calculating fees, and recording corrections, issuing permits, accepting plans, and performing technical plan review tasks. - State and City requirements to obtaining building permits. Ability to: - Read and interpret all levels of building construction and engineering plans, and specifications to determine code compliance related to one, two, and three family residential construction. - Calculate processing and impact fees. - Advise and assist customers on building permit requirements, and issue building permits using the City's automated permit system. - Use various computer software programs to research properties and buildings, enter permit and plan check information, calculate fees, and perform calculations. Certification: - Certification by I.C.C. or other recognized certifying organization in combination dwelling inspector and building inspector categories. - Completion of an approved testing or formalized training program in residential combination and structural plan review - Recognition by the Chief Building Official of the competency to perform all required duties. Non-Structural Building Plan Review Knowledge of: - Standard commercial drawings, plans, specifications, methods and materials as applied to multi-family and commercial structures. - Codes, ordinances, and policies that apply to non-structural, egress, and life safety. - Methods and formulas for calculating various development fees. - Automated systems for tracking permits, calculating fees, recording corrections, issuing permits, accepting plans, and performing technical plan review tasks. - State and City requirements relating to obtaining permits. Ability to: - Read and interpret all levels of building construction plans and specifications to determine code compliance related to multi-family and commercial structures. - Calculate processing and impact fees. - Advise customers of building permit requirements and issue building permits using the City's automated permit system. - Use various computer software programs to research properties and buildings, enter permit and plan check information, calculate fees, and perform calculations. Certification: - Certification by I.C.C. or other recognized certifying organization in Plans Examiner and building inspector categories - Completion of an approved testing or formalized training program in non-structural building plan review. - Recognition by the Chief Building Official of the competency to perform all required duties. Plumbing/Mechanical Plan Review Knowledge of: - Standard commercial drawings, plans, specifications, methods and materials as applied to multi-family and commercial structures. - Codes, ordinances, and policies that apply to Plumbing/Mechanical installations. - Methods and formulas for calculating various development fees. - Automated systems for tracking permits, calculating fees, recording corrections, issuing permits, accepting plans, and performing technical plan review tasks. - State and City requirements relating to obtaining permits. Ability to: - Read and interpret all levels of building construction plans and engineering plans and specifications to determine code compliance related to multi-family and commercial structures. - Calculate processing and impact fees. - Advise customers of building permit requirements and issue building permits using the City's automated permit system. - Use various computer software programs to research properties and buildings, enter permit and plan check information, calculate fees, and perform calculations. Certification: - Certification by I.C.C. or other recognized certifying organization in plumbing inspector and mechanical inspector categories. - Completion of an approved testing or formalized training program in plumbing/mechanical review. - Recognition by the Chief Building Official of the competency to perform all required duties. Electrical Plan Review Knowledge of: - Standard commercial drawings, plans, specifications, methods and materials as applied to multi-family and commercial structures. - Codes, ordinances, and policies that apply to electrical installations. - Methods and formulas for calculating various development fees. - Automated systems for tracking permits, calculating fees, recording corrections, issuing permits, accepting plans, and performing technical plan review tasks. - State and City requirements relating to obtaining permits. Ability to: - Read and interpret all levels of building construction plans and engineering plans and specifications to determine code compliance related to multi-family and commercial structures. - Calculate processing and impact fees. - Advise customers of building permit requirements and issue building permits using the City's automated permit system. - Use various computer software programs to research properties and buildings, enter permit and plan check information, calculate fees, and perform calculations. Certification: - Certification by I.C.C. or other recognized certifying organization in the electrical inspector category. - Completion of an approved testing or formalized training program in electrical plan review. - Recognition by the Chief Building Official of the competency to perform all required duties. Project Management (Public or Private Buildings) Knowledge of: - Contract management as it relates to construction and plan review contracts. - Software used for contract management purposes. - Non-code related materials and methods used in construction projects. - Permitting processes and systems utilized on complex construction projects. Ability to: - Read and understand construction contract provisions to effectively monitor contractor compliance. - Recognize correct installation of building, plumbing and mechanical, electrical and roofing systems as applied to City construction projects for both code and non-code related installations. - Manage and coordinate the more complex or difficult construction projects from conception to completion. - Work with applicants and staff from various areas to manage projects and resolve issues in relation to large and complex building projects. - Assist customers, identify problems and seek resolution. - Obtain recognition by the Public Works Department, or the Chief Building Official in project management competency. Certification: - Recognition by the Public Works Department, or the Chief Building Official in project management competency. Enforcement Case Management Knowledge of: - Search, seizure and other citation practices authorized under state and federal law. - Contract management principles as applied to demolition and repair contractors. - Provisions of the City and state codes relating to Housing and Dangerous Building activities. Ability to: - Obtain and maintain citation authority. - Enforce regulations with firmness and tact. - Perform data entry into the City Code System and use the computer to enter case notes, notices and other documents and reports. - Investigate complaints and inspect structures to determine if a Housing or Dangerous Building case needs to be initiated. - Work effectively with owners and contractors to identify deficiencies, issue building permits for corrective work or demolitions, and inspect work in progress. - Testify before City boards, and in a court of law in relation to cases, as required. - Work effectively with Police Officers and Code Enforcement Officers in enforcement of POP cases. - Manage the more difficult or complex investigations or enforcement actions. Certification: - Recognition by the Neighborhoods Department, or the Chief Building Official in Case Management. - PC 832 Certification, AACA Housing Enforcement Officer Certification. - Instruction in one or more of the following training programs: Regulatory Investigation Techniques, Community Oriented Policing or Pepper Spray. THE SELECTION PROCEDURE P lease note, the City of Sacramento's preferred method of communication with applicants is via e-mail. As such, please ensure you verify the e-mail address on your application, and check your e-mail frequently , including your spam and junk folders. All e-mail notifications can also be accessed through the governmentjobs.com applicant inbox. 1. Application: (Pass/Fail) - All applicants must complete and submit online a City of Sacramento employment application by the final filing deadline ; Employment applications must be submitted online; paper applications will not be accepted. Employment applications will be considered incomplete and will be disqualified: If applicants do not list current and/or past job-related experience in the duties area of the "Work Experience" section. Note: Qualifying experience is based on full-time experience (40 hours per week). Qualifying experience is calculated to the full-time equivalent (pro-rated if less than 40 hours/week ). If "see resume" is noted in the "Work Experience" section; a resume will not substitute for the information required in the "Work Experience" section. Proof of education such as, but not limited to, university/college transcripts and degrees should be submitted online with your application. Proof of education will be required at time of appointment. Proof of certification and/or license should be submitted online with your application. Proof of certification and/or license will be required at time of appointment. Position/job titles will not be considered in determining eligibility for meeting the minimum qualifications for this position. If you’re requesting Veteran’s credit, a copy of your DD214 must be submitted online with your application or emailed to the Employment Office by the final filing deadline . Information regarding the use of Veteran’s credit can be found in the Civil Service Board rules under rule 4.9C. Applicants are responsible for attaching a copy of their DD214 to each position for which they apply. 2. Training and Experience Exam : (Weighted 100%) - The questions located at the end of the application are the Training and Experience (T&E) Exam. Responses to the T&E questions will be rated and scored. This exam will evaluate the relevance, level, and progression of a candidate's education, training and experience. The exam score will determine your ranking on the eligible list for this job. When completing the T&E questions, please note: Responses to the T&E questions must be submitted online; paper questionnaires will not be accepted. A resume will not substitute for the information required in the T&E questions. 3. Eligibility : Candidates who pass the Training and Experience Test will be placed on the eligible list. The hiring department may contact candidates for interview at any time during the life of the one-year list. Candidate’s eligibility expires one year from the date of notification of a passing score for the Building Inspector I examination. 4. Screening Committee : (Pass/Fail)- All candidates that pass the examination and are in one of the top three ranks will have their application forwarded to the hiring department for review. The hiring department will select the most competitive applications for further consideration. Human Resources will only evaluate employment applications for the minimum qualifications, as stated on the job announcement, for applications selected by the hiring department. 5. Conditional Hire: Upon receipt of a conditional offer, the selected candidate must complete and pass Live Scan/fingerprinting. If applicable, candidates may also need to pass a pre-employment medical exam, controlled substance and/or alcohol test, and possess any required licensure or certification prior to receiving a start date from the Department. Failure to meet these prerequisites will be grounds for withdrawal of your conditional offer of employment. QUESTIONS: For questions concerning this job announcement and the application process: Please visit https://www.governmentjobs.com/Home/ApplicationGuide for a comprehensive, step-by-step guide to the application process. For technical support between 6 AM - 5 PM PT, contact Live Applicant Support at (855) 524-5627. Visit the City of Sacramento Human Resources Department website at https://www.cityofsacramento.gov/HR/employment ; Send an email to employment@cityofsacramento.org ; or Call the Human Resources Department at (916) 808-5726 Bilingual Pay Did you know that the City offers bilingual pay? That's right, most labor agreements offer the option of providing employees with bilingual pay if the department deems it to be operationally necessary. Pension Reform Act The City of Sacramento is covered by the California Public Employees' Retirement System, and as such, must adhere to the California Public Employee's Pension Reform Act (PEPRA) of 2013. Please note that the provisions within this act may affect or impact an applicant's eligibility and/or selection for open vacancies at the City of Sacramento. Equal Opportunity Employer The City of Sacramento is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. Additional Information Civil Service Rules: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/CivilServiceBoardRules62012.pdf Union Contracts: https://www.cityofsacramento.gov/HR/labor-agreements.html Salary Schedule: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/SalarySchedule.pdf Closing Date/Time: 5/14/2024 11:59 PM Pacific
May 01, 2024
Full Time
THE POSITION With supervisor approval, incumbents may be eligible for intermittent remote work; however, they must physically reside within the Sacramento region or have the ability to regularly report to a City of Sacramento physical worksite with little notice. The City of Sacramento Community Development Department is seeking a Building Inspector to join the Building Division’s addressing team. This position works on assigning and managing street names and numerical addresses for parcels of land and buildings. Working with a dedicated team, the position will coordinate with multiple city departments and outside agencies on street and address information for new and existing buildings, lots, streets, and alleys. This position will perform research, process address requests, assign addresses, and assist citizens, businesses, and developers on address-related questions. IDEAL CANDIDATE STATEMENT The ideal candidate will possess excellent customer service and interpersonal abilities, keen attention to detail, and the ability to solve problems. The ideal candidate should have experience reading plans of various construction types and designated occupancy groups. The ideal candidate is able to work independently and use good judgement to make decisions on addresses. BUILDING INSPECTOR I/ BUILDING INSPECTOR II/ BUILDING INSPECTOR III DEFINITION To perform rule specific inspection activities in the review of plans and inspections of new building projects, alterations, and repairs, to enforce a variety of codes, ordinances, and established standards to achieve compliance, and to perform other duties and responsibilities as required. Depending on qualifications, incumbents may be assigned to any one, or any combination of inspection discipline areas as: Building Specialty Inspection Plumbing/Mechanical Specialty Inspection Electrical Specialty Inspection Roofing Combination Inspection Residential Combination Inspection Multi-Family Residential and Light Commercial Combination Inspection Residential Combination & Structural Plan Review Non-Structural Building Plan Review Plumbing/Mechanical Plan Review Electrical Plan Review Project Management Enforcement Case Management Building Specialty Inspection assignments concern inspections of residential and commercial construction and applicable methods, practices, materials, codes, ordinances and policies used in construction work as related to building construction. Plumbing/Mechanical Specialty Inspection assignments concern inspections of residential and commercial construction and applicable methods, practices, materials, codes, ordinances and policies used in construction work as related to plumbing and mechanical construction. Electrical Specialty Inspection assignments concern inspections of residential and commercial construction and applicable methods, practices, materials, codes, ordinances and policies used in construction work as related to electrical construction. Roofing Combination Inspection assignments concern inspections on roofing installations on one and two family residences, multi- family and commercial buildings, including building, plumbing, mechanical, and electrical inspections, incidental to the roofing work. Residential Combination Inspection assignments concern inspections on building, plumbing, mechanical, electrical, and roofing installations on one, two, and three family residences for conformance with applicable codes and ordinances. Multi-Family Residential and Light Commercial Combination Inspection assignments concern inspections on building, plumbing, mechanical, electrical, and roofing installations on specific types of building permits for multi-family and commercial buildings qualifying for inspections by Light Commercial Inspectors. Residential Combination & Structural Plan Review assignments concern the review of all building plans and supporting materials for one, two, and three family dwellings, and the acceptance and review of building permits to ensure compliance with various codes, ordinances, and policies; responsible for the preparation of correction notices defining plan deficiencies. Inspects all work, including the most complex installations to support fast track construction and assists with other inspections, including combination inspections. Non-Structural Building Plan Review assignments concern the review of the more complex building plans and supporting materials for commercial and multi-family buildings, and the acceptance and review of building permits to ensure compliance with various codes, ordinances and policies, responsible for the preparation of correction notices defining plan deficiencies; inspects all work, including the most complex installations to support fast track construction, and assists with other inspections disciplines as they relate to non-structural building plan review and construction. Plumbing/Mechanical Plan Review assignments concern the review of all building plans and supporting materials for plumbing and mechanical installations, and the acceptance and review of building permits to ensure compliance with various codes, ordinances and policies; responsible for the preparation of correction notices defining plan deficiencies; inspects all work, including the most complex installations to support fast track construction and assists with other inspection disciplines as they relate to plumbing and mechanical plan review installations. Electrical Plan Review assignments concern the review of all building plans and supporting materials for electrical installations, and the acceptance and review of building permits to ensure compliance with various codes, ordinances and policies; responsible for the preparation of correction notices defining plan deficiencies; inspects all work, including the most complex installations to support fast track construction, and assists with other inspection disciplines as they relate to electrical plan review and installations. Project Management assignments concern the development and administration of contracts for the construction or plan review of facilities, and the inspection of construction to ensure compliance with plans and specifications, and the management and coordination of City or private venture projects. Projects are managed and coordinated from conception through completion. In addition, Project Management assignments assist the project team by coordinating and expediting project approval, plan review, permit issuance, and inspections functions with various departments and agencies. Enforcement Case Management assignments concern complaint investigations for determination of code deficiencies, not necessarily related to active construction; management of contracts to demolish or repair structures with identified deficiencies, and coordination with various organizations and agencies in managing cases. DISTINGUISHING CHARACTERISTICS The Building Inspector class levels are distinguished by the number of inspection disciplines an inspector is recognized to be qualified in based on certification and demonstrable abilities. Positions in this class are flexibly staffed and are automatically flexed to the higher level upon completion of required experience and certification as established per the discipline being flexed to. Appointment to the higher class requires that the employee be performing the full range of duties for the class and meet the qualification standards for the class. Building Inspector I is the entry-level classification in the building inspection series requiring skill and knowledge in any one inspection discipline as illustrated. Incumbents may be assigned to perform the less difficult or complex work in other disciplines as required. Building Inspector II is distinguished from Building Inspector I, in that the former requires the performance of complex duties within two inspection disciplines as illustrated. Incumbents may be assigned to perform the less difficult or complex work in other disciplines as required. Building Inspector III is distinguished from Building Inspector I and II that it requires the incumbent to perform complex duties within three inspection disciplines as illustrated. Incumbents may be assigned to perform the less difficult or complex work in other disciplines as required. Building Inspector I, II, and III is distinguished from Building Inspector IV, by the latter requiring the incumbent to perform complex duties within four inspection disciplines. SUPERVISION RECEIVED AND EXCERCISED Direct and lead supervision is provided by a Supervising Building Inspector or higher-level management personnel. ESSENTIAL DUTIES AND RESPONSIBILITIES - Identify and enforce a variety of codes, ordinances, and standards violations for conformance with plans and specifications. - Inspect workmanship and materials in building construction projects for conformance with plans and specifications, and inspect potentially substandard or dangerous buildings. - Work with diagrams, specifications, plans, and similar documents. - Read and interpret building construction and engineering plan specifications and codes. - Prepare and maintain reports. - Confer with, and assist architects, engineers, contractors, builders, homeowners, tenants and the general public in the field and office; explain and interpret requirements and restrictions, keep records and prepare reports as necessary. - Enter information into the Automated Permit System and the computer for word processing, calendaring, and electronic mail. - Perform basic plan review, routing and project management activities, issue permits, and fee calculations. - Identify illegal construction activity and issues violation notices. - May perform case or project management activities. - Other duties may be performed, not all duties may be performed by each individual holding this classification. QUALIFICATIONS Knowledge of: - Methods, practices, and materials used in construction work relating to a particular inspection discipline. - Proper inspection techniques to examine workmanship and materials. - Data entry and information retrieval from various computer systems necessary for duties. - Safety rules, regulations and practices applied to construction areas and office spaces. - Codes, ordinances, and policies applicable to a particular inspection discipline(s). Ability to: - Read and write the English language at a level of proficiency necessary for effective job performance. - Apply technical knowledge and follow proper inspection techniques to examine workmanship and materials. - Recognize correct installations of building systems; detect defects and faults in construction workmanship and materials. - Detect deviations from plans, regulations, and read and interpret building construction and engineering plans, specifications, and codes. - Understand diagrams, specifications, plans, and similar documents at a level necessary for efficient job performance. - Establish and maintain effective working relationships with staff, engineers, architects, contractors, tenants, owners, and the general public. - Operate a motor vehicle. - Operate a personal computer and other electronic equipment, including field entry devices and cellular phone. - Lift, carry, push, tools, equipment, supplies and plans weighing up to 50 pounds. - Work within confined spaces, climb ladders, work around power and noise producing equipment, work in confined spaces requiring reaching, twisting, turning, kneeling, bending, stooping, squatting, and crouching. - Work in all weather conditions including wet, hot, cold and windy. - Access construction areas within construction sites. Ability to: - Work on uneven work surfaces, trenches, slopes, roof structures, framing, and other conditions found in a construction environment. - Serve on-call, work after hours, weekends and holidays, during emergency situations, and as required. - Anticipate issues and seek resolution through various resources. - Provide service to all customers with a professional and sincere attitude; be customer service oriented. EDUCATION AND EXPERIENCE: Any combination equivalent to experience and education that could likely provide the required knowledge and abilities would be qualifying. A typical way to obtain the knowledge and abilities would be: EDUCATION: Equivalent to the completion of the 12th grade. -AND_ EXPERIENCE: One year of experience performing building inspection work within one or more inspection disciplines for a municipal or county government agency, or three years of journey level experience in the building construction field as a plumber, electrician, carpenter, roofer, or closely related field, within the discipline(s) applied. -OR- EDUCATION: Completion of 21 units of college level courses in building inspection, construction, or other related areas and possession of a certification issued by the I.C.C. or other approved certifying organization in the building construction or plans examiner fields -AND- EXPERIENCE: One year of experience performing a variety of paraprofessional/technical work related to plan checking and inspections. PROOF OF EDUCATION Should education be used to qualify for this position, then proof of education such as, but not limited to, university/college transcripts and degrees should be submitted with your application and will be required at the time of appointment . Unofficial documents and/or copies are acceptable. An applicant with a college degree obtained outside the United States must have education records evaluated by a credentials evaluation service. Evaluation of education records will be due at time of appointment. PROOF OF CERTIFICATION Should certification and/or license be used to qualify for this position, then proof of said certification and /or license should be submitted with your application and will be required at the time of appointment . SPECIAL QUALIFICATIONS DRIVER LICENSE: Possession of a valid California Class C Driver License is required at the time of appointment. Individuals who do not meet this requirement due to a physical disability will be considered for accommodation on a case by case basis. CERTIFICATION: Incumbents must possess certification from an approved certifying organization in their specific work discipline(s) and obtain recognition of competency within one year of appointment. Maintenance of required certifications is a condition for continued employment in this classification. PROBATIONARY PERIOD Employees must complete twelve (12) months of probation at a satisfactory performance level prior to gaining permanent status. In addition, incumbents in each inspection discipline must have the following knowledge, abilities, and experience and/or certification as outlined per discipline. Once appointed, inspectors may qualify and perform work in other disciplines. Building Specialty Inspection, Plumbing/Mechanical Specialty Inspection, or Electrical Specialty Inspection Knowledge of: - Methods, practices, codes, ordinances, policies, and materials used in construction work as it relates to the specialty area, and applies to both residential and commercial construction. Ability to: - Inspect all work, including the more complex or difficult installations within the specialty. Experience and Certification: - Three years of experience as a journey-level craft person in the specialty area, or a closely related discipline, and a working knowledge of building construction. - Certification by I.C.C. or other approved certifying organization in the appropriate specialty categories. - Recognition by the Chief Building Official of the competency to perform both residential and commercial building inspections. Roofing Combination Inspection Knowledge of: - Methods, practices, and materials used in roofing as applied to both residential and commercial construction. - Codes, ordinances and policies that are applied to roofing and all other disciplines that are incidental to roofing work. Ability to: - Recognize correct installation of roofing systems. - Inspect all work, including the more complex and difficult roofing systems. Experience and Certification: - Three years of experience as a journey-level crafts person in the roofing discipline, or a closely related discipline, and working knowledge of roofing construction, including all incidental disciplines associated with roofs. - Certification by I.C.C. or other approved certifying organization as a Building Inspector. - Completion of an approved testing or training program in combination roofing inspection. - Recognition by the Chief Building Official of the competency to perform both residential and commercial inspections within the specialty. Residential Combination Inspection Knowledge of: - Methods, practices, codes, ordinances, policies, and materials used in construction work applied to one, two, and three family residential construction. Ability to: - Recognize correct installation of building, plumbing and mechanical, electrical and roofing systems. Experience and Certification: - Certification by I.C.C. or other certifying organization in Combination - Dwelling Inspector and completion of an approved testing Program. - One year as a Building Inspector for another municipal or county government agency performing residential combination inspections. - Recognition by the Chief Building Official of the competency to perform residential combination inspections. -OR- - Completion of a formalized City training Program in residential combination inspections. Renewal of city certification required every three years. - Recognition by the Chief Building Official of the competency to perform residential combination inspections. Multi-Family Residential and Light Commercial Combination Inspection Knowledge of: - Methods, practices, codes, ordinances, policies, and materials used in construction work applied to multi-family and commercial buildings qualifying for inspection by Light Commercial Inspectors. Ability to: - Recognize correct installation of building, plumbing and mechanical, electrical and roofing systems as applied to multi- family and commercial buildings qualifying for inspection by Light Commercial Inspectors. Certification: - Certification by I.C.C. or other approved certifying organization in Commercial Combination Inspections, or Building Inspector, Mechanical Inspector, Plumbing Inspector, and Electrical Inspector. - Completion of an approved testing or formalized training program in Commercial Combination Inspections. - Recognition by the Chief Building Official of the competency to perform multi-family residential and light commercial inspections. Residential Combination & Structural Plan Review Knowledge of: - Standard construction drawings, plans, specifications, methods and materials applied to one, two, and three family residential structures. - Codes, ordinances, and policies that apply to Plumbing/Mechanical, electrical, and structural. - Methods and formulas for calculating various development fees. - Automated systems for tracking permits, calculating fees, and recording corrections, issuing permits, accepting plans, and performing technical plan review tasks. - State and City requirements to obtaining building permits. Ability to: - Read and interpret all levels of building construction and engineering plans, and specifications to determine code compliance related to one, two, and three family residential construction. - Calculate processing and impact fees. - Advise and assist customers on building permit requirements, and issue building permits using the City's automated permit system. - Use various computer software programs to research properties and buildings, enter permit and plan check information, calculate fees, and perform calculations. Certification: - Certification by I.C.C. or other recognized certifying organization in combination dwelling inspector and building inspector categories. - Completion of an approved testing or formalized training program in residential combination and structural plan review - Recognition by the Chief Building Official of the competency to perform all required duties. Non-Structural Building Plan Review Knowledge of: - Standard commercial drawings, plans, specifications, methods and materials as applied to multi-family and commercial structures. - Codes, ordinances, and policies that apply to non-structural, egress, and life safety. - Methods and formulas for calculating various development fees. - Automated systems for tracking permits, calculating fees, recording corrections, issuing permits, accepting plans, and performing technical plan review tasks. - State and City requirements relating to obtaining permits. Ability to: - Read and interpret all levels of building construction plans and specifications to determine code compliance related to multi-family and commercial structures. - Calculate processing and impact fees. - Advise customers of building permit requirements and issue building permits using the City's automated permit system. - Use various computer software programs to research properties and buildings, enter permit and plan check information, calculate fees, and perform calculations. Certification: - Certification by I.C.C. or other recognized certifying organization in Plans Examiner and building inspector categories - Completion of an approved testing or formalized training program in non-structural building plan review. - Recognition by the Chief Building Official of the competency to perform all required duties. Plumbing/Mechanical Plan Review Knowledge of: - Standard commercial drawings, plans, specifications, methods and materials as applied to multi-family and commercial structures. - Codes, ordinances, and policies that apply to Plumbing/Mechanical installations. - Methods and formulas for calculating various development fees. - Automated systems for tracking permits, calculating fees, recording corrections, issuing permits, accepting plans, and performing technical plan review tasks. - State and City requirements relating to obtaining permits. Ability to: - Read and interpret all levels of building construction plans and engineering plans and specifications to determine code compliance related to multi-family and commercial structures. - Calculate processing and impact fees. - Advise customers of building permit requirements and issue building permits using the City's automated permit system. - Use various computer software programs to research properties and buildings, enter permit and plan check information, calculate fees, and perform calculations. Certification: - Certification by I.C.C. or other recognized certifying organization in plumbing inspector and mechanical inspector categories. - Completion of an approved testing or formalized training program in plumbing/mechanical review. - Recognition by the Chief Building Official of the competency to perform all required duties. Electrical Plan Review Knowledge of: - Standard commercial drawings, plans, specifications, methods and materials as applied to multi-family and commercial structures. - Codes, ordinances, and policies that apply to electrical installations. - Methods and formulas for calculating various development fees. - Automated systems for tracking permits, calculating fees, recording corrections, issuing permits, accepting plans, and performing technical plan review tasks. - State and City requirements relating to obtaining permits. Ability to: - Read and interpret all levels of building construction plans and engineering plans and specifications to determine code compliance related to multi-family and commercial structures. - Calculate processing and impact fees. - Advise customers of building permit requirements and issue building permits using the City's automated permit system. - Use various computer software programs to research properties and buildings, enter permit and plan check information, calculate fees, and perform calculations. Certification: - Certification by I.C.C. or other recognized certifying organization in the electrical inspector category. - Completion of an approved testing or formalized training program in electrical plan review. - Recognition by the Chief Building Official of the competency to perform all required duties. Project Management (Public or Private Buildings) Knowledge of: - Contract management as it relates to construction and plan review contracts. - Software used for contract management purposes. - Non-code related materials and methods used in construction projects. - Permitting processes and systems utilized on complex construction projects. Ability to: - Read and understand construction contract provisions to effectively monitor contractor compliance. - Recognize correct installation of building, plumbing and mechanical, electrical and roofing systems as applied to City construction projects for both code and non-code related installations. - Manage and coordinate the more complex or difficult construction projects from conception to completion. - Work with applicants and staff from various areas to manage projects and resolve issues in relation to large and complex building projects. - Assist customers, identify problems and seek resolution. - Obtain recognition by the Public Works Department, or the Chief Building Official in project management competency. Certification: - Recognition by the Public Works Department, or the Chief Building Official in project management competency. Enforcement Case Management Knowledge of: - Search, seizure and other citation practices authorized under state and federal law. - Contract management principles as applied to demolition and repair contractors. - Provisions of the City and state codes relating to Housing and Dangerous Building activities. Ability to: - Obtain and maintain citation authority. - Enforce regulations with firmness and tact. - Perform data entry into the City Code System and use the computer to enter case notes, notices and other documents and reports. - Investigate complaints and inspect structures to determine if a Housing or Dangerous Building case needs to be initiated. - Work effectively with owners and contractors to identify deficiencies, issue building permits for corrective work or demolitions, and inspect work in progress. - Testify before City boards, and in a court of law in relation to cases, as required. - Work effectively with Police Officers and Code Enforcement Officers in enforcement of POP cases. - Manage the more difficult or complex investigations or enforcement actions. Certification: - Recognition by the Neighborhoods Department, or the Chief Building Official in Case Management. - PC 832 Certification, AACA Housing Enforcement Officer Certification. - Instruction in one or more of the following training programs: Regulatory Investigation Techniques, Community Oriented Policing or Pepper Spray. THE SELECTION PROCEDURE P lease note, the City of Sacramento's preferred method of communication with applicants is via e-mail. As such, please ensure you verify the e-mail address on your application, and check your e-mail frequently , including your spam and junk folders. All e-mail notifications can also be accessed through the governmentjobs.com applicant inbox. 1. Application: (Pass/Fail) - All applicants must complete and submit online a City of Sacramento employment application by the final filing deadline ; Employment applications must be submitted online; paper applications will not be accepted. Employment applications will be considered incomplete and will be disqualified: If applicants do not list current and/or past job-related experience in the duties area of the "Work Experience" section. Note: Qualifying experience is based on full-time experience (40 hours per week). Qualifying experience is calculated to the full-time equivalent (pro-rated if less than 40 hours/week ). If "see resume" is noted in the "Work Experience" section; a resume will not substitute for the information required in the "Work Experience" section. Proof of education such as, but not limited to, university/college transcripts and degrees should be submitted online with your application. Proof of education will be required at time of appointment. Proof of certification and/or license should be submitted online with your application. Proof of certification and/or license will be required at time of appointment. Position/job titles will not be considered in determining eligibility for meeting the minimum qualifications for this position. If you’re requesting Veteran’s credit, a copy of your DD214 must be submitted online with your application or emailed to the Employment Office by the final filing deadline . Information regarding the use of Veteran’s credit can be found in the Civil Service Board rules under rule 4.9C. Applicants are responsible for attaching a copy of their DD214 to each position for which they apply. 2. Training and Experience Exam : (Weighted 100%) - The questions located at the end of the application are the Training and Experience (T&E) Exam. Responses to the T&E questions will be rated and scored. This exam will evaluate the relevance, level, and progression of a candidate's education, training and experience. The exam score will determine your ranking on the eligible list for this job. When completing the T&E questions, please note: Responses to the T&E questions must be submitted online; paper questionnaires will not be accepted. A resume will not substitute for the information required in the T&E questions. 3. Eligibility : Candidates who pass the Training and Experience Test will be placed on the eligible list. The hiring department may contact candidates for interview at any time during the life of the one-year list. Candidate’s eligibility expires one year from the date of notification of a passing score for the Building Inspector I examination. 4. Screening Committee : (Pass/Fail)- All candidates that pass the examination and are in one of the top three ranks will have their application forwarded to the hiring department for review. The hiring department will select the most competitive applications for further consideration. Human Resources will only evaluate employment applications for the minimum qualifications, as stated on the job announcement, for applications selected by the hiring department. 5. Conditional Hire: Upon receipt of a conditional offer, the selected candidate must complete and pass Live Scan/fingerprinting. If applicable, candidates may also need to pass a pre-employment medical exam, controlled substance and/or alcohol test, and possess any required licensure or certification prior to receiving a start date from the Department. Failure to meet these prerequisites will be grounds for withdrawal of your conditional offer of employment. QUESTIONS: For questions concerning this job announcement and the application process: Please visit https://www.governmentjobs.com/Home/ApplicationGuide for a comprehensive, step-by-step guide to the application process. For technical support between 6 AM - 5 PM PT, contact Live Applicant Support at (855) 524-5627. Visit the City of Sacramento Human Resources Department website at https://www.cityofsacramento.gov/HR/employment ; Send an email to employment@cityofsacramento.org ; or Call the Human Resources Department at (916) 808-5726 Bilingual Pay Did you know that the City offers bilingual pay? That's right, most labor agreements offer the option of providing employees with bilingual pay if the department deems it to be operationally necessary. Pension Reform Act The City of Sacramento is covered by the California Public Employees' Retirement System, and as such, must adhere to the California Public Employee's Pension Reform Act (PEPRA) of 2013. Please note that the provisions within this act may affect or impact an applicant's eligibility and/or selection for open vacancies at the City of Sacramento. Equal Opportunity Employer The City of Sacramento is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. Additional Information Civil Service Rules: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/CivilServiceBoardRules62012.pdf Union Contracts: https://www.cityofsacramento.gov/HR/labor-agreements.html Salary Schedule: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/SalarySchedule.pdf Closing Date/Time: 5/14/2024 11:59 PM Pacific
Orange County, CA
Orange County, California, United States
CAREER DESCRIPTION MARINE MECHANIC This recruitment will be posted for a minimum of five (5) business days and will remain posted on a continuous basis until the needs of the Department are met. Qualified applicants are encouraged to apply immediately. In addition to performance-based merit increases, this position is scheduled to receive salary range increases on the following dates: Effective June 28, 2024 - 4.00% increase Effective June 27, 2025 - 3.75% increase Salary may be negotiable within the range listed above, based on position requirements and successful candidate's qualifications, subject to appropriate authorization. THIS RECRUITMENT IS OPEN TO THE PUBLIC POSITION/RECRUITMENT INFORMATION This recruitment is being held to establish an Open Eligible List. The list can be used to fill current and future Marine Mechanic positions. The eligible list established may also be used to fill similar and/or lower level classifications. THE DEPARTMENT The Orange County Sheriff’s Department is among the largest in the nation, providing exemplary law enforcement services focused on a collaborative, dedicated and innovative approach to public safety. The more than 3,800 sworn and professional staff, along with more than 800 reserve personnel, are committed to serving the needs of Orange County by embodying the Sheriff’s Department core values: Integrity without Compromise Service Before Self Professionalism in the Performance of Duty Vigilance in Safeguarding our Community The Department consists of six organizational Commands comprised of 23 Divisions. Together, these Commands and Divisions provide services including land, air and sea-based patrol, custody operations, investigative services, emergency management, coroner services, forensics and specialty operations, among an extensive list of other public safety services. THE DIVISION The Harbor Patrol/Marine Operations Bureau provides around-the-clock law enforcement, marine firefighting and search/rescue services along the 48 miles of Orange County coastline and within the county's three major harbors at Newport Beach, Sunset-Huntington and Dana Point.The Marine Operations fleet consists of six twin-engine fireboats and nine single-engine patrol boats. The fleet is completely maintained "in-house" by the bureau's highly skilled marine mechanics and craftsmen. The maintenance staff consists of one supervisor, four marine mechanics, two marine painters, and one marine carpenter. THE OPPORTUNITY The Marine Mechanics under direction perform journey level work in installing, maintaining and repairing marine inboard and outboard gasoline engines and propulsion equipment; to maintain and repair fire pumps and other mechanical equipment. SPECIAL REQUIREMENTS Applicants must not have been convicted of a felony or be on any form of probation and must pass an extensive background investigation to the satisfaction of the Orange County Sheriff-Coroner. Background screening includes completing of a Personal History Form, interview with a background investigator, fingerprinting and may include a polygraph test. Some of the areas considered in the background screening include prior convictions, traffic violations, drug use and credit problems, employment history, professional references and education verification (i.e. degree, license, or official transcripts). Foreign degrees require an evaluation of U.S. equivalency by an agency that is a member of the National Association of Credential Services (N.A.C.E.S). MINIMUM QUALIFICATIONS Click here to learn more about the minimum qualifications and example of duties for the Marine Mechanic position . IDEAL CANDIDATE The ideal candidate will possess more than five (5) years of experience in installing, maintaining and repairing marine inboard gasoline engines, propulsion equipment, transmissions, steering systems, outdrives, and outboards; to maintain and repair fire pumps and other mechanical equipment. Ideal candidate would also have completed service training schools from one or more of the following: Volvo-Penta, Crusader Marine, or Yamaha outboards. PHYSICAL, MENTAL, and ENVIRONMENTAL REQUIREMENT The County of Orange is committed to providing a means for applicants who may have a disability to identify areas in which they may request a reasonable accommodation. Below is a description of the physical, mental, and environmental abilities that are customarily required to perform the essential job functions of the position. Applicants are encouraged to contact the recruiter identified in the announcement for any questions or to request an accommodation during the selection process. Physical Requirements Ability to stand, reach, bend, stoop, and perform strenuous physical/manual labor. Ability to walk up/down uneven terrain/irregular surfaces/hills. Upper body strength to lift/push/pull/carry up to 50 pound objects; vision sufficient to read standard text, and to drive vehicles requiring a Class B license with passenger endorsement, such as dump crews passenger trucks; speak and hear well enough in a noisy environment to communicate clearly and understandably in person, over the telephone and in small groups; and manual dexterity to write. Able to swim and perform ocean sea tests in Harbor Patrol vessels. Environmental Conditions Stamina to work outdoors in varied climates and exposed to weather, noise, pollens, dust, fumes, birds, noise, and vibration. Ability to work on floating docks and moving vessels. SELECTION PROCEDURES Human Resources |Minimum Qualifications Sheriff Human Resources screens all application to identify the most qualified candidates for the position based on skills required to meet the needs of the Department. After the initial screening, the qualified candidates will be referred to the next step and notified of all further procedures applicable to their status in the competition. Structured Oral Interview | Oral Exam (Weighted 100%): A panel of job knowledge experts will interview and evaluate each candidate's responses to a series of structured questions designed to elicit the candidate's qualifications for the job. This is a competitive process; therefore, candidate responses to the structured questions should be thorough, detailed, and complete. Only the most successful candidates will be placed on the eligible list. Based on the Department's needs, the selection procedures listed above may be modified. All candidates will be notified of any changes in the selection procedures. ELIGIBLE LIST After all procedures have been completed, Sheriff Human Resources will establish an eligible list of qualified candidates. Candidates placed on the eligible list may be referred to a selection interview to be considered for present and future vacancies. Veterans Employment Preference Policy (VEPP) The County is committed to providing a mechanism to give preferential consideration in the employment process to veterans and their eligible spouses and will provide eligible participants the opportunity to receive interviews in the selection process for employment and paid internship openings. Please click here to review the policy. HOW TO APPLY Only on-line applications will be accepted. Resumes will not be accepted in lieu of on-line applications. Application information must be current, succinct and related to the requirements in this job announcement. Your application should demonstrate your professional experience and education related to the specific qualifications/duties listed in this bulletin, including areas which you have developed expertise. For specific information pertaining to this recruitment, contact Maria Cervantes at (714) 834-5624 or email mcervantes@ocsheriff.gov. Click here for tips to complete your application. ADDITIONAL INFORMATION EMAIL NOTIFICATION: Email is the primary form of notification during the recruitment process. Please ensure your correct email address is included in our application and use only one email account. NOTE: User accounts are established for one person only and should not be shared with another person. Multiple applications with multiple users may jeopardize your status in the recruitment process for any positions for which you apply. Candidates will be notified regarding their status as the recruitment proceeds via email through the GovernmentJobs.com site. Please check your email folders, including spam/junk folders, and/or accept emails ending with "governmentjobs.com" and "ocgov.com." If your email address should change, please update your profile at www.governmentjobs.com . FREQUENTLY ASKED QUESTIONS: Click here for additional Frequently Asked Questions. EEO INFORMATION Orange County, as an equal employment opportunity employer, encourages applicants from diverse backgrounds to apply. Non-Management Benefits In addition to the County's standard suite of benefits, such as a variety of health plan options, annual leave and paid holidays--we also offer an excellent array of benefits such as a Health Care Reimbursement Account, 457 Defined Contribution Plan and Annual Education and Professional Reimbursement. Employees are provided a Retirement Plan through the Orange County Employees Retirement System (OCERS). Please go to the following link to find out more about Defined Benefit Pensions and OCERS Plan Types/Benefits. http://www.ocers.org/active-member-information Click here for information about benefits offered to County of Orange employees. Closing Date/Time: Continuous
Mar 08, 2024
Full Time
CAREER DESCRIPTION MARINE MECHANIC This recruitment will be posted for a minimum of five (5) business days and will remain posted on a continuous basis until the needs of the Department are met. Qualified applicants are encouraged to apply immediately. In addition to performance-based merit increases, this position is scheduled to receive salary range increases on the following dates: Effective June 28, 2024 - 4.00% increase Effective June 27, 2025 - 3.75% increase Salary may be negotiable within the range listed above, based on position requirements and successful candidate's qualifications, subject to appropriate authorization. THIS RECRUITMENT IS OPEN TO THE PUBLIC POSITION/RECRUITMENT INFORMATION This recruitment is being held to establish an Open Eligible List. The list can be used to fill current and future Marine Mechanic positions. The eligible list established may also be used to fill similar and/or lower level classifications. THE DEPARTMENT The Orange County Sheriff’s Department is among the largest in the nation, providing exemplary law enforcement services focused on a collaborative, dedicated and innovative approach to public safety. The more than 3,800 sworn and professional staff, along with more than 800 reserve personnel, are committed to serving the needs of Orange County by embodying the Sheriff’s Department core values: Integrity without Compromise Service Before Self Professionalism in the Performance of Duty Vigilance in Safeguarding our Community The Department consists of six organizational Commands comprised of 23 Divisions. Together, these Commands and Divisions provide services including land, air and sea-based patrol, custody operations, investigative services, emergency management, coroner services, forensics and specialty operations, among an extensive list of other public safety services. THE DIVISION The Harbor Patrol/Marine Operations Bureau provides around-the-clock law enforcement, marine firefighting and search/rescue services along the 48 miles of Orange County coastline and within the county's three major harbors at Newport Beach, Sunset-Huntington and Dana Point.The Marine Operations fleet consists of six twin-engine fireboats and nine single-engine patrol boats. The fleet is completely maintained "in-house" by the bureau's highly skilled marine mechanics and craftsmen. The maintenance staff consists of one supervisor, four marine mechanics, two marine painters, and one marine carpenter. THE OPPORTUNITY The Marine Mechanics under direction perform journey level work in installing, maintaining and repairing marine inboard and outboard gasoline engines and propulsion equipment; to maintain and repair fire pumps and other mechanical equipment. SPECIAL REQUIREMENTS Applicants must not have been convicted of a felony or be on any form of probation and must pass an extensive background investigation to the satisfaction of the Orange County Sheriff-Coroner. Background screening includes completing of a Personal History Form, interview with a background investigator, fingerprinting and may include a polygraph test. Some of the areas considered in the background screening include prior convictions, traffic violations, drug use and credit problems, employment history, professional references and education verification (i.e. degree, license, or official transcripts). Foreign degrees require an evaluation of U.S. equivalency by an agency that is a member of the National Association of Credential Services (N.A.C.E.S). MINIMUM QUALIFICATIONS Click here to learn more about the minimum qualifications and example of duties for the Marine Mechanic position . IDEAL CANDIDATE The ideal candidate will possess more than five (5) years of experience in installing, maintaining and repairing marine inboard gasoline engines, propulsion equipment, transmissions, steering systems, outdrives, and outboards; to maintain and repair fire pumps and other mechanical equipment. Ideal candidate would also have completed service training schools from one or more of the following: Volvo-Penta, Crusader Marine, or Yamaha outboards. PHYSICAL, MENTAL, and ENVIRONMENTAL REQUIREMENT The County of Orange is committed to providing a means for applicants who may have a disability to identify areas in which they may request a reasonable accommodation. Below is a description of the physical, mental, and environmental abilities that are customarily required to perform the essential job functions of the position. Applicants are encouraged to contact the recruiter identified in the announcement for any questions or to request an accommodation during the selection process. Physical Requirements Ability to stand, reach, bend, stoop, and perform strenuous physical/manual labor. Ability to walk up/down uneven terrain/irregular surfaces/hills. Upper body strength to lift/push/pull/carry up to 50 pound objects; vision sufficient to read standard text, and to drive vehicles requiring a Class B license with passenger endorsement, such as dump crews passenger trucks; speak and hear well enough in a noisy environment to communicate clearly and understandably in person, over the telephone and in small groups; and manual dexterity to write. Able to swim and perform ocean sea tests in Harbor Patrol vessels. Environmental Conditions Stamina to work outdoors in varied climates and exposed to weather, noise, pollens, dust, fumes, birds, noise, and vibration. Ability to work on floating docks and moving vessels. SELECTION PROCEDURES Human Resources |Minimum Qualifications Sheriff Human Resources screens all application to identify the most qualified candidates for the position based on skills required to meet the needs of the Department. After the initial screening, the qualified candidates will be referred to the next step and notified of all further procedures applicable to their status in the competition. Structured Oral Interview | Oral Exam (Weighted 100%): A panel of job knowledge experts will interview and evaluate each candidate's responses to a series of structured questions designed to elicit the candidate's qualifications for the job. This is a competitive process; therefore, candidate responses to the structured questions should be thorough, detailed, and complete. Only the most successful candidates will be placed on the eligible list. Based on the Department's needs, the selection procedures listed above may be modified. All candidates will be notified of any changes in the selection procedures. ELIGIBLE LIST After all procedures have been completed, Sheriff Human Resources will establish an eligible list of qualified candidates. Candidates placed on the eligible list may be referred to a selection interview to be considered for present and future vacancies. Veterans Employment Preference Policy (VEPP) The County is committed to providing a mechanism to give preferential consideration in the employment process to veterans and their eligible spouses and will provide eligible participants the opportunity to receive interviews in the selection process for employment and paid internship openings. Please click here to review the policy. HOW TO APPLY Only on-line applications will be accepted. Resumes will not be accepted in lieu of on-line applications. Application information must be current, succinct and related to the requirements in this job announcement. Your application should demonstrate your professional experience and education related to the specific qualifications/duties listed in this bulletin, including areas which you have developed expertise. For specific information pertaining to this recruitment, contact Maria Cervantes at (714) 834-5624 or email mcervantes@ocsheriff.gov. Click here for tips to complete your application. ADDITIONAL INFORMATION EMAIL NOTIFICATION: Email is the primary form of notification during the recruitment process. Please ensure your correct email address is included in our application and use only one email account. NOTE: User accounts are established for one person only and should not be shared with another person. Multiple applications with multiple users may jeopardize your status in the recruitment process for any positions for which you apply. Candidates will be notified regarding their status as the recruitment proceeds via email through the GovernmentJobs.com site. Please check your email folders, including spam/junk folders, and/or accept emails ending with "governmentjobs.com" and "ocgov.com." If your email address should change, please update your profile at www.governmentjobs.com . FREQUENTLY ASKED QUESTIONS: Click here for additional Frequently Asked Questions. EEO INFORMATION Orange County, as an equal employment opportunity employer, encourages applicants from diverse backgrounds to apply. Non-Management Benefits In addition to the County's standard suite of benefits, such as a variety of health plan options, annual leave and paid holidays--we also offer an excellent array of benefits such as a Health Care Reimbursement Account, 457 Defined Contribution Plan and Annual Education and Professional Reimbursement. Employees are provided a Retirement Plan through the Orange County Employees Retirement System (OCERS). Please go to the following link to find out more about Defined Benefit Pensions and OCERS Plan Types/Benefits. http://www.ocers.org/active-member-information Click here for information about benefits offered to County of Orange employees. Closing Date/Time: Continuous
MASSACHUSETTS TRIAL COURT
Salem, Massachusetts, United States
Title: Senior Maintenance Technician- Salem Pay Grade: Grade 13 Starting Pay: $54,593.18/Yr. Departmental Mission Statement: The Facilities Management Department of Trial Court provides for the management and maintenance of 63 state-owned courthouses located in ten counties of the Commonwealth. The Department is committed to administering effective property management, and for ensuring the delivery of quality services necessary for the efficient and reliable operation of all of the facilities which it maintains. FACILITES MANAGEMENT & CAPITAL PLANNING ORGANIZATIONAL PROFILE: Notes: Candidate must be licensed as an Electrician, HVAC or a Plumber. The hours for this position is 6am-2pm. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. This position may have occasional travel. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. Position Summary: This series is responsible for performing the full range of skilled trade position duties for both licensed and unlicensed trades. Typical duties include repairing, installing and testing various types of systems and equipment. These positions may also frequently include the application of complex materials and compounds consistent with general contracting work. The title above the entry level requires the performance of increasingly more responsible and varied work which requires advanced skill and experience with regard to the various licensed and unlicensed trades. Employees are appointed at the entry level position title and are eligible for reclassification to a higher level position within this series consistent with the specifications for the higher level position title. The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Reports to a Facilities Supervisor performing structured but not always routine work; Moderate judgment is required. Senior Maintenance Tech I (13) - This is the entry level position within this series. Employees at this level are expected to perform plumbing, electrical, carpentry, HVAC, painting, and other trades and technical work in their area of expertise. Employees are expected to have an established area specialization developed through training and experience and can work independently. Senior Maintenance Tech II (14) - This is the second level within the series. These employees are generally involved in projects of a larger scope and complexity consistent with experience and training. The Senior Maintenance Tech II engages in more complex project assignments and has a higher degree of contact with court officials. Senior Maintenance Tech IIs take lead roles in the completion of projects. Employees are required to work a minimum of three years as a Senior Maintenance Tech I before being eligible to reclassify to the higher level. Senior Maintenance Tech II positions also require the employee to hold a trade or technical license if applicable in their area of specialization prior to applying for reclassification. Senior Maintenance Technician Duties: The following list of major duties represents a composite list of typical duties performed by individuals in various areas of specialization. Specific duties performed by an incumbent will vary depending upon the Division, designated assignment, and level of the employee. All positions may perform related duties as required. Carpenter Maintains buildings and related structures applying carpentry techniques and using carpentry tools to construct, alter, repair and/or install walls, stairs, floors, ceilings, windows, doors, roofs, gutters, locks, air-conditioners, handicapped chair rails and ramps, shelving, etc. Inspect buildings needing carpentry repair or alterations, estimates job duration and the cost and/or quantities of labor and materials needed to complete the job. Interprets and/or draws up sketches, patterns, blueprints, instructions and/or layouts of work to be done. Perform structural repair, alteration or improvement work such as lowering ceilings and paneling rooms; preparing surfaces for plaster or cement work; studding, wiring and plastering walls and cracks in floors or around windows; taping joints on sheetrock; and pre-cementing and/or replacing formica tops. Confers with various department heads or managers regarding handling of emergencies, the feasibility of performing repair or alterations and the scheduling of work. Performs related work such as framing pictures; making window and door screens; drilling holes in signs; ordering materials and supplies and cleaning; and sharpening and tempering various tools and equipment. Electrician Tests, repairs, installs and /or maintains various types of electrical systems and equipment by operating the appropriate equipment and tools to ensure proper maintenance and functioning of necessary equipment. Troubleshoots electrical and related equipment using necessary electrical equipment and by reading schematics, diagrams and outlines to identify and correct operational problems. Maintain an adequate inventory of equipment and materials. Elevator Repairperson The following list of major duties represents a composite list of typical duties performed by individuals in this position. Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division. Inspects and tests elevators and related machinery to ensure that they meet legal operating requirements. Review plans and specifications for proposed installations or alterations of elevators and related machinery. Test elevators to ensure the receipt of certificates of inspections. Provide technical assistance by responding orally or in writing to inquiries. Perform periodic inspections in compliance with public safety requirements. Coordinates and schedules inspections with other agencies and contractors maintaining personal logs, compiles statistical data and represents the agency at hearing or meetings. HVAC Technician Installs, repairs, alters and maintains existing heating, venting and air conditioning (HVAC) equipment and systems. Troubleshoots HVAC equipment and systems. Run standard tests to determine whether finished work meets specifications. Inspect facility to determine the need for maintenance and repair to HVAC equipment. Establish priorities and make recommendations concerning work activities. Locksmith Install lock devices in doors, desks, office equipment and other units. Repairs and/or overhauls locking devices such as mortise, rim, key-in-the knob locks, dead bolt, office equipment, padlocks and emergency exit locks by repairing for replacing worn tumblers, springs or other parts of locking devices; by making alterations to locking mechanisms and units; and/or by replacing escutcheons and face plates on doors to change the size of existing holes to assure correct Fitchburg District Court. Repairs and/or installs locks containing dual locking capabilities by reworking locking devices designed to work in conjunction with other components and equipment to form a complete security or surveillance system. Changes lock combinations by inserting new or repaired tumblers into locks in order to increase security. Mason/Plasterer Lays brick, stone and cement blocks using a variety of hand and power tools such as brick or napping hammer, brick or shill saw, pick, chisel and hammer to build, alter, repair and /or maintain brick and/or concrete surfaces and structures such as sidewalks, partitions, floors, chimneys, etc. Plasters walls and ceilings. Prepare surfaces for plastering or cement work. Pours concrete in molds or forms to make slabs or blocks .Erects and dismantles scaffolding, riggings, and/or ladders. Reads instructions and interprets blueprints and sketches to determine work to be done. Repairs masonry and walls by patching with cement or plaster. Tape joints on sheetrock Perform related duties such as caulking and waterproofing cracks in walls and floors; coring holes through cement or marble floors; cleaning tools and equipment; laying-out cement or marble floors; cleaning tools and equipment; laying-out drop cloths; studding, wiring, and plastering door and window openings, etc. Order materials and supplies. Repair and maintain power tools to ensure proper operation. Painter Applies paints, varnish, and/or stains to all types of surfaces(e.g. wood, metal, plaster, etc.) In order to protect and beautify such surfaces using appropriate utensils and equipment such as paint spraying machines. Prepares surfaces for painting using appropriate tools, equipment and techniques. Selects the types and color of paints, varnish or stain and mixes, blends and prepares the same for proper color match. Erects, repairs, maintains and operates staging, and scaffolding following accepted safety practices in order to gain access to areas needing painting. Estimates length of time, cost and quantities of materials and manpower needed to complete a job. Operates, cleans and maintains hand and power tools, air compressors and painting equipment. Confers with supervisors and department heads regarding the scheduling of work, the handling of emergencies and the feasibility of installing painting equipment and materials in the area in order to ensure that needs of the agency are met expeditiously and at a convenient time. Prepares surfaces for plaster or cement work by taping joints on sheetrock, caulking and waterproofing walls and cracks in floors, etc. by using appropriate tools and equipment. Performs related duties such as preparing various reports; maintaining records and files; setting up signs and barricades; reading instructions on lay-outs; removing and replacing glass; drilling holes in signs; printing letters and signs; laying out drop cloths; and moving office furniture. Based on assignment, may operate road-line painting machines and sand blasting equipment. Read and/or interpret blueprints, sketches, instructions or layouts to understand work to be done. Plumber Install, repairs, and alters steam plumbing systems. Reads and interprets blueprints, sketches, instructions or layouts to understand construction work to be done. Schedules installation, maintenance, and/or repair work by conferring with supervisors and other department personnel to determine location of equipment and appropriate time to complete the project. Estimates length of time, cost of materials and manpower needed to develop a project budget. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas: Ethics and Values Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. Mission Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. Problem Solving Accurately assesses maintenance problems of a routine nature and initiates corrective action. Continuous Learning Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. Commitment to Diversity Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. Customer Service Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. Collaboration Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Senior Maintenance Technician: A high school diploma or equivalent; and, the following required experience and abilities in one or more of the following skilled trades or areas of specialization: Carpenter: Must have at least four years of full-time experience in carpentry, woodworking or cabinet-making work or a combination of two years' experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the principles and techniques of carpentry. Knowledge of the types of building structures. Knowledge of the types of material used in carpentry. Knowledge of the types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging, etc. Knowledge and skill in the types and uses of small hand held tools such as hammers, saws, screwdrivers, chisels, drills, etc. Knowledge and skill in the types and uses of tools used in carpentry bench work. Knowledge and skill in the types and uses of small measurement devices such as power saws, power drills, power hammers, etc. Electrician: Possession of a current and valid Massachusetts journeyman electrician's license issued by the Board of State Examiners of Electricians. Knowledge of state and local electrical codes. Knowledge of inspection techniques used in the electrical trade. Knowledge of safety practices and precautions observed in the electrical trade. Ability to follow oral and written instructions. Ability to perform arithmetical computations with speed and accuracy. Ability to climb and work from ladders and scaffolds. Elevator Repairperson: Possession of a current and valid License as an Maintenance Man and Repairman issued by the Massachusetts Dept. of Public Safety. Knowledge of the principles of operations of elevators, escalators, and hoisting systems. Knowledge of the methods followed in the repair and maintenance of elevators and related machinery. Knowledge of safety practices and procedures followed in connection with maintenance. Skill in the operation of freight and passenger elevators and related machinery. Ability to understand and apply the laws, rules, regulations, policies, procedures, specifications, standards, and guidelines governing elevators and related machinery. Ability to read and interpret such documents as technical and equipment operation manuals, plans, specifications, blueprints, etc. HVAC Technician: Possession of a current and valid Massachusetts journeyman license in a related field or an equivalent combination of education and experience. Experience in interpreting blueprints and plans, estimating costs for renovations, maintenance/repair of HVAC systems. Experience in the use and operation of power tools and other equipment. Knowledge of the laws, rules, and regulations governing HVAC systems. Knowledge of state building codes. Ability to follow written and oral instructions. Ability to perform arithmetical computations with speed and accuracy. Locksmith: Must have at least four years of full-time experience in locksmithing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the methods and techniques used in installing and repair of lock or lock assemblies. Knowledge of the types and uses of small hand tools and uses of precision measuring equipment. Skill in the methods and techniques of making and cutting keys. Ability to exercise discretion in handling confidential information. Ability to maintain accurate records. Ability to follow written and oral instructions. Ability to read and interpret such documents as plans, specifications, blueprints, etc Mason/Plasterer: Must have at least (2) two years of full-time experience as stonemason, marble setter, bricklayer or plaster, or any combination of the required experience. A diploma or certificate from a recognized trade or vocational school, may be substituted for a maximum of one year of experience. Knowledge of standard practices, methods and techniques of masonry. Knowledge of the types and uses of materials used in masonry such as brick, stone, sand, etc. Knowledge of the types and uses of equipment used in masonry such as portable mixers, etc. Knowledge and skill in the types and uses of small hand tools used in masonry such as spades, chisels, trowels, etc. Knowledge of types of masonry bonds. Knowledge of types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging. Skills in the use of masonry equipment such as portable mixers. Ability to follow written instructions. Ability to read and interpret documents such as plans, blueprints, drawings, etc. Ability to climb and work from ladders and scaffolds. Painter: Must have at least three years of full-time experience in painting work or a combination of two year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the practices and techniques of painting. Knowledge of the types and uses of painting materials such as paint, varnishes, and stains. Knowledge of the types of finishes used in painting. Knowledge of the methods of preparation of wood, metal, glass, plaster, cement, and other materials and surfaces for painting. Knowledge of chemical solvents used to prepare surfaces for painting and cleanup. Ability to climb and work from ladders and scaffolds. Knowledge and skill in the types and uses of painting tools such as brushes, rollers, spray machine guns, etc. Knowledge and skill in the types and uses of small hand held tools and power tools such as chisels, drills, power saws, etc. Knowledge of the properties and characteristics of wood. Knowledge of the practices and techniques of mixing and matching paints. Knowledge of the types and uses of safety or climbing equipment used in painting such as scaffolds and ladders. Skill in applying paints and other finishes by brush, cloth, air gun, etc. Skill in using painting equipment such as hand and power-operated paint chippers, sand blasting equipment, etc. Plumber: Possession of a current and valid Massachusetts journeyman plumber's license issued by the Board of State Examiners of Plumbers and Gas Fitters. Knowledge of laws, rules, and regulations governing plumbing. Ability to follow oral and written instructions. Ability to lift and carry heavy objects. Physical stamina and endurance. Ability to maintain accurate records. Roofer: Must have at least two years of full-time experience in roofing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the types and uses of small measurement devices, hand held power tools, and equipment used in roofing. Knowledge of safety practices and procedures followed in roofing. Knowledge of the types and uses of materials used in roofing. Knowledge of the safety practices, methods and techniques of roofing. Skill in the use of small measurement devices, hand held power tools, and equipment used in roofing. Ability to climb and work from ladders and scaffold Closing Date/Time: 2024-08-01
May 03, 2024
Full Time
Title: Senior Maintenance Technician- Salem Pay Grade: Grade 13 Starting Pay: $54,593.18/Yr. Departmental Mission Statement: The Facilities Management Department of Trial Court provides for the management and maintenance of 63 state-owned courthouses located in ten counties of the Commonwealth. The Department is committed to administering effective property management, and for ensuring the delivery of quality services necessary for the efficient and reliable operation of all of the facilities which it maintains. FACILITES MANAGEMENT & CAPITAL PLANNING ORGANIZATIONAL PROFILE: Notes: Candidate must be licensed as an Electrician, HVAC or a Plumber. The hours for this position is 6am-2pm. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. This position may have occasional travel. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. Position Summary: This series is responsible for performing the full range of skilled trade position duties for both licensed and unlicensed trades. Typical duties include repairing, installing and testing various types of systems and equipment. These positions may also frequently include the application of complex materials and compounds consistent with general contracting work. The title above the entry level requires the performance of increasingly more responsible and varied work which requires advanced skill and experience with regard to the various licensed and unlicensed trades. Employees are appointed at the entry level position title and are eligible for reclassification to a higher level position within this series consistent with the specifications for the higher level position title. The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Reports to a Facilities Supervisor performing structured but not always routine work; Moderate judgment is required. Senior Maintenance Tech I (13) - This is the entry level position within this series. Employees at this level are expected to perform plumbing, electrical, carpentry, HVAC, painting, and other trades and technical work in their area of expertise. Employees are expected to have an established area specialization developed through training and experience and can work independently. Senior Maintenance Tech II (14) - This is the second level within the series. These employees are generally involved in projects of a larger scope and complexity consistent with experience and training. The Senior Maintenance Tech II engages in more complex project assignments and has a higher degree of contact with court officials. Senior Maintenance Tech IIs take lead roles in the completion of projects. Employees are required to work a minimum of three years as a Senior Maintenance Tech I before being eligible to reclassify to the higher level. Senior Maintenance Tech II positions also require the employee to hold a trade or technical license if applicable in their area of specialization prior to applying for reclassification. Senior Maintenance Technician Duties: The following list of major duties represents a composite list of typical duties performed by individuals in various areas of specialization. Specific duties performed by an incumbent will vary depending upon the Division, designated assignment, and level of the employee. All positions may perform related duties as required. Carpenter Maintains buildings and related structures applying carpentry techniques and using carpentry tools to construct, alter, repair and/or install walls, stairs, floors, ceilings, windows, doors, roofs, gutters, locks, air-conditioners, handicapped chair rails and ramps, shelving, etc. Inspect buildings needing carpentry repair or alterations, estimates job duration and the cost and/or quantities of labor and materials needed to complete the job. Interprets and/or draws up sketches, patterns, blueprints, instructions and/or layouts of work to be done. Perform structural repair, alteration or improvement work such as lowering ceilings and paneling rooms; preparing surfaces for plaster or cement work; studding, wiring and plastering walls and cracks in floors or around windows; taping joints on sheetrock; and pre-cementing and/or replacing formica tops. Confers with various department heads or managers regarding handling of emergencies, the feasibility of performing repair or alterations and the scheduling of work. Performs related work such as framing pictures; making window and door screens; drilling holes in signs; ordering materials and supplies and cleaning; and sharpening and tempering various tools and equipment. Electrician Tests, repairs, installs and /or maintains various types of electrical systems and equipment by operating the appropriate equipment and tools to ensure proper maintenance and functioning of necessary equipment. Troubleshoots electrical and related equipment using necessary electrical equipment and by reading schematics, diagrams and outlines to identify and correct operational problems. Maintain an adequate inventory of equipment and materials. Elevator Repairperson The following list of major duties represents a composite list of typical duties performed by individuals in this position. Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division. Inspects and tests elevators and related machinery to ensure that they meet legal operating requirements. Review plans and specifications for proposed installations or alterations of elevators and related machinery. Test elevators to ensure the receipt of certificates of inspections. Provide technical assistance by responding orally or in writing to inquiries. Perform periodic inspections in compliance with public safety requirements. Coordinates and schedules inspections with other agencies and contractors maintaining personal logs, compiles statistical data and represents the agency at hearing or meetings. HVAC Technician Installs, repairs, alters and maintains existing heating, venting and air conditioning (HVAC) equipment and systems. Troubleshoots HVAC equipment and systems. Run standard tests to determine whether finished work meets specifications. Inspect facility to determine the need for maintenance and repair to HVAC equipment. Establish priorities and make recommendations concerning work activities. Locksmith Install lock devices in doors, desks, office equipment and other units. Repairs and/or overhauls locking devices such as mortise, rim, key-in-the knob locks, dead bolt, office equipment, padlocks and emergency exit locks by repairing for replacing worn tumblers, springs or other parts of locking devices; by making alterations to locking mechanisms and units; and/or by replacing escutcheons and face plates on doors to change the size of existing holes to assure correct Fitchburg District Court. Repairs and/or installs locks containing dual locking capabilities by reworking locking devices designed to work in conjunction with other components and equipment to form a complete security or surveillance system. Changes lock combinations by inserting new or repaired tumblers into locks in order to increase security. Mason/Plasterer Lays brick, stone and cement blocks using a variety of hand and power tools such as brick or napping hammer, brick or shill saw, pick, chisel and hammer to build, alter, repair and /or maintain brick and/or concrete surfaces and structures such as sidewalks, partitions, floors, chimneys, etc. Plasters walls and ceilings. Prepare surfaces for plastering or cement work. Pours concrete in molds or forms to make slabs or blocks .Erects and dismantles scaffolding, riggings, and/or ladders. Reads instructions and interprets blueprints and sketches to determine work to be done. Repairs masonry and walls by patching with cement or plaster. Tape joints on sheetrock Perform related duties such as caulking and waterproofing cracks in walls and floors; coring holes through cement or marble floors; cleaning tools and equipment; laying-out cement or marble floors; cleaning tools and equipment; laying-out drop cloths; studding, wiring, and plastering door and window openings, etc. Order materials and supplies. Repair and maintain power tools to ensure proper operation. Painter Applies paints, varnish, and/or stains to all types of surfaces(e.g. wood, metal, plaster, etc.) In order to protect and beautify such surfaces using appropriate utensils and equipment such as paint spraying machines. Prepares surfaces for painting using appropriate tools, equipment and techniques. Selects the types and color of paints, varnish or stain and mixes, blends and prepares the same for proper color match. Erects, repairs, maintains and operates staging, and scaffolding following accepted safety practices in order to gain access to areas needing painting. Estimates length of time, cost and quantities of materials and manpower needed to complete a job. Operates, cleans and maintains hand and power tools, air compressors and painting equipment. Confers with supervisors and department heads regarding the scheduling of work, the handling of emergencies and the feasibility of installing painting equipment and materials in the area in order to ensure that needs of the agency are met expeditiously and at a convenient time. Prepares surfaces for plaster or cement work by taping joints on sheetrock, caulking and waterproofing walls and cracks in floors, etc. by using appropriate tools and equipment. Performs related duties such as preparing various reports; maintaining records and files; setting up signs and barricades; reading instructions on lay-outs; removing and replacing glass; drilling holes in signs; printing letters and signs; laying out drop cloths; and moving office furniture. Based on assignment, may operate road-line painting machines and sand blasting equipment. Read and/or interpret blueprints, sketches, instructions or layouts to understand work to be done. Plumber Install, repairs, and alters steam plumbing systems. Reads and interprets blueprints, sketches, instructions or layouts to understand construction work to be done. Schedules installation, maintenance, and/or repair work by conferring with supervisors and other department personnel to determine location of equipment and appropriate time to complete the project. Estimates length of time, cost of materials and manpower needed to develop a project budget. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas: Ethics and Values Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. Mission Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. Problem Solving Accurately assesses maintenance problems of a routine nature and initiates corrective action. Continuous Learning Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. Commitment to Diversity Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. Customer Service Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. Collaboration Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Senior Maintenance Technician: A high school diploma or equivalent; and, the following required experience and abilities in one or more of the following skilled trades or areas of specialization: Carpenter: Must have at least four years of full-time experience in carpentry, woodworking or cabinet-making work or a combination of two years' experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the principles and techniques of carpentry. Knowledge of the types of building structures. Knowledge of the types of material used in carpentry. Knowledge of the types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging, etc. Knowledge and skill in the types and uses of small hand held tools such as hammers, saws, screwdrivers, chisels, drills, etc. Knowledge and skill in the types and uses of tools used in carpentry bench work. Knowledge and skill in the types and uses of small measurement devices such as power saws, power drills, power hammers, etc. Electrician: Possession of a current and valid Massachusetts journeyman electrician's license issued by the Board of State Examiners of Electricians. Knowledge of state and local electrical codes. Knowledge of inspection techniques used in the electrical trade. Knowledge of safety practices and precautions observed in the electrical trade. Ability to follow oral and written instructions. Ability to perform arithmetical computations with speed and accuracy. Ability to climb and work from ladders and scaffolds. Elevator Repairperson: Possession of a current and valid License as an Maintenance Man and Repairman issued by the Massachusetts Dept. of Public Safety. Knowledge of the principles of operations of elevators, escalators, and hoisting systems. Knowledge of the methods followed in the repair and maintenance of elevators and related machinery. Knowledge of safety practices and procedures followed in connection with maintenance. Skill in the operation of freight and passenger elevators and related machinery. Ability to understand and apply the laws, rules, regulations, policies, procedures, specifications, standards, and guidelines governing elevators and related machinery. Ability to read and interpret such documents as technical and equipment operation manuals, plans, specifications, blueprints, etc. HVAC Technician: Possession of a current and valid Massachusetts journeyman license in a related field or an equivalent combination of education and experience. Experience in interpreting blueprints and plans, estimating costs for renovations, maintenance/repair of HVAC systems. Experience in the use and operation of power tools and other equipment. Knowledge of the laws, rules, and regulations governing HVAC systems. Knowledge of state building codes. Ability to follow written and oral instructions. Ability to perform arithmetical computations with speed and accuracy. Locksmith: Must have at least four years of full-time experience in locksmithing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the methods and techniques used in installing and repair of lock or lock assemblies. Knowledge of the types and uses of small hand tools and uses of precision measuring equipment. Skill in the methods and techniques of making and cutting keys. Ability to exercise discretion in handling confidential information. Ability to maintain accurate records. Ability to follow written and oral instructions. Ability to read and interpret such documents as plans, specifications, blueprints, etc Mason/Plasterer: Must have at least (2) two years of full-time experience as stonemason, marble setter, bricklayer or plaster, or any combination of the required experience. A diploma or certificate from a recognized trade or vocational school, may be substituted for a maximum of one year of experience. Knowledge of standard practices, methods and techniques of masonry. Knowledge of the types and uses of materials used in masonry such as brick, stone, sand, etc. Knowledge of the types and uses of equipment used in masonry such as portable mixers, etc. Knowledge and skill in the types and uses of small hand tools used in masonry such as spades, chisels, trowels, etc. Knowledge of types of masonry bonds. Knowledge of types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging. Skills in the use of masonry equipment such as portable mixers. Ability to follow written instructions. Ability to read and interpret documents such as plans, blueprints, drawings, etc. Ability to climb and work from ladders and scaffolds. Painter: Must have at least three years of full-time experience in painting work or a combination of two year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the practices and techniques of painting. Knowledge of the types and uses of painting materials such as paint, varnishes, and stains. Knowledge of the types of finishes used in painting. Knowledge of the methods of preparation of wood, metal, glass, plaster, cement, and other materials and surfaces for painting. Knowledge of chemical solvents used to prepare surfaces for painting and cleanup. Ability to climb and work from ladders and scaffolds. Knowledge and skill in the types and uses of painting tools such as brushes, rollers, spray machine guns, etc. Knowledge and skill in the types and uses of small hand held tools and power tools such as chisels, drills, power saws, etc. Knowledge of the properties and characteristics of wood. Knowledge of the practices and techniques of mixing and matching paints. Knowledge of the types and uses of safety or climbing equipment used in painting such as scaffolds and ladders. Skill in applying paints and other finishes by brush, cloth, air gun, etc. Skill in using painting equipment such as hand and power-operated paint chippers, sand blasting equipment, etc. Plumber: Possession of a current and valid Massachusetts journeyman plumber's license issued by the Board of State Examiners of Plumbers and Gas Fitters. Knowledge of laws, rules, and regulations governing plumbing. Ability to follow oral and written instructions. Ability to lift and carry heavy objects. Physical stamina and endurance. Ability to maintain accurate records. Roofer: Must have at least two years of full-time experience in roofing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the types and uses of small measurement devices, hand held power tools, and equipment used in roofing. Knowledge of safety practices and procedures followed in roofing. Knowledge of the types and uses of materials used in roofing. Knowledge of the safety practices, methods and techniques of roofing. Skill in the use of small measurement devices, hand held power tools, and equipment used in roofing. Ability to climb and work from ladders and scaffold Closing Date/Time: 2024-08-01