HARRY REID INTERNATIONAL AIRPORT
Harry Reid International Airport - Las Vegas, Nevada, United States
ABOUT THE POSITION THE POSTING DATE FOR THIS RECRUITMENT HAS BEEN CHANGED AND IS NOW REFLECTED IN THE JOB ANNOUNCEMENT. The Clark County Department of Aviation is seeking qualified candidates to apply for the Airport ATS Technician I/II position. This position performs journey level work in the installation, maintenance and repair of the highly complex Airport Transit Systems (Trams). Includes system and vehicle recovery (manually operates trains, doors, and power distribution systems), electrical (low voltage up to 600V), mechanical, pneumatic, electro-mechanical functions, CCTV, RF signaling, basic PLC understanding, and basic network understanding - CISCO switches. Airport ATS Technician I: $25.29 - $39.16 Hourly Airport ATS Technician II: $27.29 - $42.28 Hourly The Airport ATS Technician I is a training underfill position, upon successful completion of the training program the successful candidate will be non-competitively promoted to Airport ATS Technician II. This is an open and continuous recruitment, scheduling dates will vary depending on when the application was received and reviewed by Human Resources. Human Resources reserves the right to call only the most qualified applicants to the selection process. MINIMUM REQUIREMENTS Education and Experience: Airport ATS Technician I: Equivalent to graduation from high school and six (6) years of mechanical, electro-mechanical, electronic and pneumatic experience. An apprenticeship in any of these areas will substitute on a year to year basis for experience. Airport ATS Technician II: In addition to the above, two (2) years of maintenance and repair experience, in the area of automated transit systems. Qualifying education and experience must be clearly documented in the “Education” and “Work Experience” sections of the application. Do not substitute a resume for your application or write "see attached resume" on your application. Licensing and Certification: Must possess a valid Class C Nevada driver's license at time of hire. Medical and Drug Examination: Employment is contingent upon the results of a physical examination performed by our examining physician, including pre-employment drug testing. Residency Requirement: Permanent employees must maintain a principal place of residency within the boundaries of Clark County and provide proof of compliance with Nevada motor vehicle registration and drivers' license laws within 90 days of employment. Background Check: Employment with the Department of Aviation is contingent upon completion of an education/experience background investigation, a fingerprint-based criminal history record check processed by the FBI, and upon the ability to be granted a security badge as mandated by the Transportation Security Administration. Note: all prospective hires must present two original government issued ID's upon acceptance of job offer. Examples of acceptable ID's include a Passport, Driver's License or DMV issued ID, birth certificate, Social Security card, Voter Registration card, school issued ID with picture, etc. PHYSICAL DEMANDS Mobility to work in a typical shop , mechanical room, or related maintenance setting, including operating typical trade equipment, hand and power tools and standard office equipment, and to drive a motor vehicle to various work sites; stamina to stand, sit, walk, balance, stoop, kneel, crouch, crawl and climb. Ability to work on ladders, in tunnels, and on elevated guideways exposed to the elements in inclement weather. Ability to work in confined or awkward spaces for an extended period of time; strength to lift and maneuver materials and equipment weighing up to 100 pounds with proper equipment; vision to read printed materials and a computer screen; color vision and depth perception; hearing and speech to communicate in person or over a radio or telephone. Accommodation may be made for some of these physical demands for otherwise qualified individuals who require and request such accommodation. EXAMPLES OF DUTIES Performs skilled and semi-skilled electrical, mechanical, electro-mechanical and pneumatic work in the operation, installation, and maintenance and repair of the airport's automated transit systems. Troubleshoots complex ATS system and subsystem components (tram equipment, vehicle and station doors, power distribution, and computer operating systems), to identify problems or failures and implements repairs. Conducts pre-defined inspections on the ATS system and subsystems at periodic intervals to ensure they operate in accordance with Clark County Issued Ride Certification . Replaces worn or damaged parts, removes and replaces system units and checks system operation when new or repaired units are installed; maintains records of repairs, parts used, calibration data, maintenance performed, and longevity of system assets; performs maintenance and repairs on tires, brakes, motors, switches, relays, air compressors and related system components; may troubleshoot computer boards and electrical breakers; assists service contract personnel in the maintenance of aftermarket programs; may instruct and train maintenance and service personnel in equipment installation, maintenance and repair. Contributes to the efficiency and effectiveness of the unit's service to its customers by offering suggestions and directing or participating as an active member of a work team. Performs other similar and related duties as required. Conducts safety and technical training on ATS related systems and subsystems as assigned; troubleshoots problems and repairs as required. May operate light equipment and drive a truck as assigned. Observes safe work methods and uses safety equipment; attends safety training, technical training and meetings. Utilizes an automated maintenance management system (Maximo) to record and document work performed. Join the Clark County Department of Aviation Family where we offer a comprehensive benefits package that includes: Alternative Work Schedules More Money in Your Pocket 100% Employer Paid Defined Benefit Retirement No Social Security Deduction No State Income Taxes Two Employer Sponsored Health Plans Offered - Choice of PPO or EPO (hybrid of HMO) - eligible first of the month following15 days of employment Medical - Employer pays 90% of premium Pharmacy Benefits (30, 90-day retail or mail order fills) 24/7 Telephone Advice Nurse - no employee cost Teledoc, Doctoroo, and Dispatch Health Retiree insurance - eligible after 5 years of service Dental Vision Life Insurance - Employer Paid AD&D - Employer Paid Long Term Disability - Employer Paid Generous Leave Accruals that include: 12 Paid Holidays plus a Floating Birthday Holiday Paid Vacation Leave Paid Sick Leave Holiday Leave Other leave options Catastrophic Leave Parental Leave - Up to 90 days Wide Variety of Voluntary Benefits that include Guardian - Accident, Cancer, Critical Illness, Hospital Indemnity, and Short-Term Disability Insurance. Trustmark - Permanent Life Insurance benefits and long-term care. Sunlife Financial - Basic and Voluntary Life Insurance, AD&D, and long-term disability insurance TASC - Flexible Spending Account - FSA & Dependent Day Care Debit Card Available Morgan Stanley - Deferred Compensation Plan Employee Assistance Program Onsite Fitness Center The Department of Aviation, a department of Clark County, is an affirmative action/equal opportunity employer Community Volunteer Opportunities Comprehensive training program Wellness program Closing Date/Time: Continuous
ABOUT THE POSITION THE POSTING DATE FOR THIS RECRUITMENT HAS BEEN CHANGED AND IS NOW REFLECTED IN THE JOB ANNOUNCEMENT. The Clark County Department of Aviation is seeking qualified candidates to apply for the Airport ATS Technician I/II position. This position performs journey level work in the installation, maintenance and repair of the highly complex Airport Transit Systems (Trams). Includes system and vehicle recovery (manually operates trains, doors, and power distribution systems), electrical (low voltage up to 600V), mechanical, pneumatic, electro-mechanical functions, CCTV, RF signaling, basic PLC understanding, and basic network understanding - CISCO switches. Airport ATS Technician I: $25.29 - $39.16 Hourly Airport ATS Technician II: $27.29 - $42.28 Hourly The Airport ATS Technician I is a training underfill position, upon successful completion of the training program the successful candidate will be non-competitively promoted to Airport ATS Technician II. This is an open and continuous recruitment, scheduling dates will vary depending on when the application was received and reviewed by Human Resources. Human Resources reserves the right to call only the most qualified applicants to the selection process. MINIMUM REQUIREMENTS Education and Experience: Airport ATS Technician I: Equivalent to graduation from high school and six (6) years of mechanical, electro-mechanical, electronic and pneumatic experience. An apprenticeship in any of these areas will substitute on a year to year basis for experience. Airport ATS Technician II: In addition to the above, two (2) years of maintenance and repair experience, in the area of automated transit systems. Qualifying education and experience must be clearly documented in the “Education” and “Work Experience” sections of the application. Do not substitute a resume for your application or write "see attached resume" on your application. Licensing and Certification: Must possess a valid Class C Nevada driver's license at time of hire. Medical and Drug Examination: Employment is contingent upon the results of a physical examination performed by our examining physician, including pre-employment drug testing. Residency Requirement: Permanent employees must maintain a principal place of residency within the boundaries of Clark County and provide proof of compliance with Nevada motor vehicle registration and drivers' license laws within 90 days of employment. Background Check: Employment with the Department of Aviation is contingent upon completion of an education/experience background investigation, a fingerprint-based criminal history record check processed by the FBI, and upon the ability to be granted a security badge as mandated by the Transportation Security Administration. Note: all prospective hires must present two original government issued ID's upon acceptance of job offer. Examples of acceptable ID's include a Passport, Driver's License or DMV issued ID, birth certificate, Social Security card, Voter Registration card, school issued ID with picture, etc. PHYSICAL DEMANDS Mobility to work in a typical shop , mechanical room, or related maintenance setting, including operating typical trade equipment, hand and power tools and standard office equipment, and to drive a motor vehicle to various work sites; stamina to stand, sit, walk, balance, stoop, kneel, crouch, crawl and climb. Ability to work on ladders, in tunnels, and on elevated guideways exposed to the elements in inclement weather. Ability to work in confined or awkward spaces for an extended period of time; strength to lift and maneuver materials and equipment weighing up to 100 pounds with proper equipment; vision to read printed materials and a computer screen; color vision and depth perception; hearing and speech to communicate in person or over a radio or telephone. Accommodation may be made for some of these physical demands for otherwise qualified individuals who require and request such accommodation. EXAMPLES OF DUTIES Performs skilled and semi-skilled electrical, mechanical, electro-mechanical and pneumatic work in the operation, installation, and maintenance and repair of the airport's automated transit systems. Troubleshoots complex ATS system and subsystem components (tram equipment, vehicle and station doors, power distribution, and computer operating systems), to identify problems or failures and implements repairs. Conducts pre-defined inspections on the ATS system and subsystems at periodic intervals to ensure they operate in accordance with Clark County Issued Ride Certification . Replaces worn or damaged parts, removes and replaces system units and checks system operation when new or repaired units are installed; maintains records of repairs, parts used, calibration data, maintenance performed, and longevity of system assets; performs maintenance and repairs on tires, brakes, motors, switches, relays, air compressors and related system components; may troubleshoot computer boards and electrical breakers; assists service contract personnel in the maintenance of aftermarket programs; may instruct and train maintenance and service personnel in equipment installation, maintenance and repair. Contributes to the efficiency and effectiveness of the unit's service to its customers by offering suggestions and directing or participating as an active member of a work team. Performs other similar and related duties as required. Conducts safety and technical training on ATS related systems and subsystems as assigned; troubleshoots problems and repairs as required. May operate light equipment and drive a truck as assigned. Observes safe work methods and uses safety equipment; attends safety training, technical training and meetings. Utilizes an automated maintenance management system (Maximo) to record and document work performed. Join the Clark County Department of Aviation Family where we offer a comprehensive benefits package that includes: Alternative Work Schedules More Money in Your Pocket 100% Employer Paid Defined Benefit Retirement No Social Security Deduction No State Income Taxes Two Employer Sponsored Health Plans Offered - Choice of PPO or EPO (hybrid of HMO) - eligible first of the month following15 days of employment Medical - Employer pays 90% of premium Pharmacy Benefits (30, 90-day retail or mail order fills) 24/7 Telephone Advice Nurse - no employee cost Teledoc, Doctoroo, and Dispatch Health Retiree insurance - eligible after 5 years of service Dental Vision Life Insurance - Employer Paid AD&D - Employer Paid Long Term Disability - Employer Paid Generous Leave Accruals that include: 12 Paid Holidays plus a Floating Birthday Holiday Paid Vacation Leave Paid Sick Leave Holiday Leave Other leave options Catastrophic Leave Parental Leave - Up to 90 days Wide Variety of Voluntary Benefits that include Guardian - Accident, Cancer, Critical Illness, Hospital Indemnity, and Short-Term Disability Insurance. Trustmark - Permanent Life Insurance benefits and long-term care. Sunlife Financial - Basic and Voluntary Life Insurance, AD&D, and long-term disability insurance TASC - Flexible Spending Account - FSA & Dependent Day Care Debit Card Available Morgan Stanley - Deferred Compensation Plan Employee Assistance Program Onsite Fitness Center The Department of Aviation, a department of Clark County, is an affirmative action/equal opportunity employer Community Volunteer Opportunities Comprehensive training program Wellness program Closing Date/Time: Continuous
Cal State University (CSU) Monterey Bay
100 Campus Center, Seaside, CA 93955, USA
Classification: Instructional Support Technician II - 11/12 - Non-exempt Hours: Full-time / 40 hours per week FLSA: Non-exempt Anticipated Hiring Salary Range: $4,114 to $4,644* mo. CSU Salary Schedule *CSUMB provides pay scales representing its good faith estimate of what the university reasonably expects to pay for this position. The pay offered to a selected candidate will be determined on factors such as (but not limited to) the scope and responsibilities of the position, the qualifications of the selected candidate, departmental budget availability, internal equity, and CSU systemwide pay for comparable jobs. This is an 11-month position with the month of July off. Scheduling options include 11 months of work paid over a 12 month period. Priority Screening Date: February 26, 2024 Recruitment Status: Extended ABOUT CSUMB California State University, Monterey Bay is a mid-sized university in California’s Central Coast that grants undergraduate and graduate degrees. Powered by an inspiring Founding Vision Statement , CSUMB is part of the nation’s largest four-year public university system, California State University , which educates nearly 460,000 students every year. With a vibrant, diverse student body of over 7,000 students, CSU Monterey Bay is both a Minority Serving Institution and a Hispanic Serving Institution. Our staff and faculty transform students’ lives with a focus on student success and engagement through experiential learning, service learning, and a strong emphasis on multicultural and global perspectives. CSUMB’s sustainability goal is to be carbon neutral by 2030. The university’s Strategic Plan prioritizes inclusive excellence through recruiting and investing in developing a diverse body of faculty, staff and administrators. Many appreciate living and working close to the shores of beautiful Monterey Bay, with easy access to recreational areas from Big Sur to Santa Cruz. Nearby opportunities for collaborative research include working in the Monterey Bay National Marine Sanctuary and Silicon Valley, and with colleagues at local research universities, including UC Santa Cruz and Stanford University. As one of the 23 campuses in the CSU system, CSUMB offers excellent benefits, including access to below-market-rate rental housing on East Campus, and competitive salaries for faculty and staff. With proximity to the San Francisco Bay Area and San Jose, opportunities for faculty, staff and students are as endless as the shores of the nearby Pacific Ocean. PURPOSE : Under the general supervision of the Dean of the College of Science and the work direction of the Chair of the Department of Mechatronics Engineering, the Laboratory Support Technician shall provide comprehensive services in support of laboratory courses within the Department of Mechatronics Engineering. ESSENTIAL DUTIES AND RESPONSIBILITIES include, but are not limited to, the following : Prepare, set-up, and clean up materials for labs courses that include engineering and physics, and/or other related fields as needed. Document lab set-ups and organize materials for future labs. Work with faculty and staff to plan, coordinate, and troubleshoot lab activities. Proactively plan ahead to meet multiple deadlines and priorities. Accurately maintain existing inventories of lab materials, supplies, equipment, and chemicals. Organize materials and lab spaces in collaboration with other lab staff. Provide specifications for ordering laboratory materials, reagents, and lab and field equipment. Assist in scheduling and checkout of shared resources among multiple users. Troubleshoot, maintain, and perform minor repairs on specialized lab and field instrumentation, including computer interfaces for data collection. May interact with repair technicians from outside the department. Responsible for the purchase, installation, and maintenance of engineering laboratories Develop familiarity with safety aspects of all materials, equipment, and procedures used in engineering and science labs. Organize and update safety information for access by students, instructors, and staff. Prepare biological and chemical hazards for disposal as needed, acting in compliance with relevant regulations and guidelines. Share safety information with staff, faculty, and students. Design, fabrication and construction for unique, highly technical and prototype equipment or systems Provide training as necessary for faculty, staff, and students in the use of specialized instrumentation and protocols. Train student workers in safety aspects of specialized procedures. Develop protocols for equipment use. Train students in fabrication equipment such as 3D printers, CNC, lathes, among others. Other Functions : Performs other job-related duties and special projects as assigned. KNOWLEDGE, SKILLS AND ABILITIES : Knowledge of the principles of performing support services; knowledge of the principles, methods, and techniques related to the discipline and the curriculum; knowledge of the materials and supplies in the curriculum and the curriculum and their uses. Ability to: plan, organize, and schedule activities; ability to operate technical equipment related to the discipline; ability to maintain records; ability to adjust and perform simple maintenance of technical and scientific equipment. MINIMUM QUALIFICATIONS : Equivalent to three years of experience providing instructional support services for a related unit or discipline, or in producing materials or supplies or repairing equipment in a discipline related to the area to which assigned. OR the equivalent to two years of college with 16 semester units in courses involving extensive use of materials, supplies, or equipment and in a discipline related to the area may be substituted for one year of the required experience; OR the equivalent to four years of college with 16 semester units in courses involving extensive use of materials, supplies, or equipment and in a discipline related to the area to which assigned may be substituted for two years of the required experience. SPECIALIZED SKILLS : Ability to: adjust, trouble-shoot, and perform simple maintenance of scientific and engineering instrumentation; pay attention to detail and follow verbal and written instructions; work both independently and interdependently in a rapidly evolving setting; read and write at a level appropriate to the duties of the position; communicate verbally and in writing in a cooperative, professional, and tactful manner within a diverse team of students, faculty, and support staff. Use electronic and electrical test equipment, such as multimeters, oscilloscopes, and function generators. Skilled troubleshooting, repair, maintenance, calibration, and assembly of mechanical, pneumatic, hydraulic, and electro, mechanical instructional support equipment. Use fabrication equipment, such as CNC router, lathe, laser cutters, 3D printers, and welding. PREFERRED QUALIFICATIONS : Bachelor's degree or equivalent in Engineering, Engineering Technology, Industrial Automation, or related discipline with coursework in engineering, manufacturing, or closely related discipline with at least two (2) years of experience as a technician where duties included direct responsibility for preparing labs for college courses in engineering or closely related discipline. Experience operating, maintaining, and troubleshooting engineering equipment and lab instrumentation used in college-level courses. Experience handling chemicals and hazardous waste safely; specifying scientific supplies and equipment for procurement; and with the safe operation of hand and power tools. Experience with electronic equipment, pneumatics, machining tools, lathes, welding, CNC routers, mills, among other equipment. RSS or equivalent chemical inventory database and experience with tracking scientific supplies and equipment. Technical fluency in the use of Microsoft Office Professional, including with Excel and Access, or similar programs; Google Workspace (Gmail, Docs, Sheets, Drive, Calendar, Forms, etc.); CAD software, Oracle-PeopleSoft/Common Management System or equivalent student, HR and Financial information systems; intranet drives; and internet browsers. SPECIAL CONDITIONS OF EMPLOYMENT & POSITION DESIGNATIONS : All offers of employment are contingent upon the successful completion of a background check (including a criminal records check). The person holding this position is considered a “mandated reporter” under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. This position will have a duty to report to the Campus Title IX Officer information pertaining to victims of sex discrimination, sexual harassment, sexual misconduct, dating/domestic violence, and stalking as required by CSU Executive Order 1095 . This position has been designated as a sensitive position with: responsibility for the care, safety and security of people (including children and minors), animals and CSU property; access to controlled or hazardous substances; access to and responsibility for detailed personally identifiable Level 1 confidential information about students, faculty, staff or alumni that is protected, personal or sensitive as defined in the CSU Information Security Data Classification Standards ; and responsibility for operating commercial vehicles, machinery or equipment that could pose environmental hazards or cause injury, illness, or death. This position is required to comply with confidentiality requirements outlined in the Department of Education’s Family Educational Rights and Privacy and California’s Educational Code Chapter 13 regarding sensitive student issues. Must possess and maintain a valid license to drive in the State of California, pass the Defensive Training Class, and be insurable under the University's liability coverage. May require occasional evenings and/or weekend work. PHYSICAL ENVIRONMENT : Position requires frequent movement; bending; climbing; reaching; standing; lifting objects up to 40 pounds; and applying force. Office environment with standard equipment and tasks. Position requires working at a computer and desk for extended periods of time. Requires travel between campus offices and off-campus locations. This position requires, but is not limited to, performing work indoors and outdoors in a variety of local weather conditions and environments. Must participate in all OSHA and University safety programs, as required, and follow all work safety guidelines. Involves working with chemicals; compressed gases; biological materials; glass and other sharps. Work involves use and maintenance of scientific equipment, risk of being exposed to fire, fumes, chemical and biological hazards, and electrical shock. The health and safety of our students, faculty, and staff remain our highest priority. While on campus, students, faculty, staff, and the community will be expected to follow all campus safety mandates. BENEFITS/PERKS : CSUMB offers a premium benefit package that includes outstanding vacation, health, dental and vision plans; membership in the California Public Employees Retirement System (CalPERS); and 15 paid holidays a year. For more information, visit Employee Benefits Summary . As a perk, the University Corporation at CSU Monterey Bay provides access to affordable campus housing based on availability; visit Schoonover Employee Housing for more information. APPLICATION PROCEDURE : For full consideration, applicants must complete the required online application prior to the priority screen date found at Careers at CSUMB . Application submissions received after the application screening date will be reviewed at the discretion of the University. Materials submitted become the property of CSUMB and will not be returned. CSUMB is not a sponsoring agency for staff or management positions. Reasonable accommodations will be provided for qualified applicants with disabilities who self-disclose by contacting Human Resources at (831) 582-3389 or emailing humanresources@csumb.edu . All employees must be eligible for employment in the U.S. GENERAL INFORMATION : CSUMB hires only individuals lawfully authorized to work in the United States and is an E-Verify employer. In compliance with federal crime awareness and campus security legislation, including the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics, you can view the notice of availability and access the Cal State University, Monterey Bay annual security and fire safety reports at https://csumb.edu/clery/asr-and-fsr-notices-availability/ . CSUMB is a smoke and tobacco-free campus. EQUAL OPPORTUNITY EMPLOYER : CSUMB is an Equal Opportunity employer seeking to recruit and support a broadly diverse community of faculty and staff. We value and celebrate diversity in all its forms and strive to foster an inclusive culture built on respect that affirms inter-group relations and builds cohesion. We consider qualified applicants for employment for their anticipated contributions and without regard to race, color, religion, national origin, age, gender, gender identity or expression, sexual orientation, genetic information, medical condition, pregnancy, marital status, veteran status, or disability. Advertised: Jan 22 2024 Pacific Standard Time Applications close: Closing Date/Time:
Classification: Instructional Support Technician II - 11/12 - Non-exempt Hours: Full-time / 40 hours per week FLSA: Non-exempt Anticipated Hiring Salary Range: $4,114 to $4,644* mo. CSU Salary Schedule *CSUMB provides pay scales representing its good faith estimate of what the university reasonably expects to pay for this position. The pay offered to a selected candidate will be determined on factors such as (but not limited to) the scope and responsibilities of the position, the qualifications of the selected candidate, departmental budget availability, internal equity, and CSU systemwide pay for comparable jobs. This is an 11-month position with the month of July off. Scheduling options include 11 months of work paid over a 12 month period. Priority Screening Date: February 26, 2024 Recruitment Status: Extended ABOUT CSUMB California State University, Monterey Bay is a mid-sized university in California’s Central Coast that grants undergraduate and graduate degrees. Powered by an inspiring Founding Vision Statement , CSUMB is part of the nation’s largest four-year public university system, California State University , which educates nearly 460,000 students every year. With a vibrant, diverse student body of over 7,000 students, CSU Monterey Bay is both a Minority Serving Institution and a Hispanic Serving Institution. Our staff and faculty transform students’ lives with a focus on student success and engagement through experiential learning, service learning, and a strong emphasis on multicultural and global perspectives. CSUMB’s sustainability goal is to be carbon neutral by 2030. The university’s Strategic Plan prioritizes inclusive excellence through recruiting and investing in developing a diverse body of faculty, staff and administrators. Many appreciate living and working close to the shores of beautiful Monterey Bay, with easy access to recreational areas from Big Sur to Santa Cruz. Nearby opportunities for collaborative research include working in the Monterey Bay National Marine Sanctuary and Silicon Valley, and with colleagues at local research universities, including UC Santa Cruz and Stanford University. As one of the 23 campuses in the CSU system, CSUMB offers excellent benefits, including access to below-market-rate rental housing on East Campus, and competitive salaries for faculty and staff. With proximity to the San Francisco Bay Area and San Jose, opportunities for faculty, staff and students are as endless as the shores of the nearby Pacific Ocean. PURPOSE : Under the general supervision of the Dean of the College of Science and the work direction of the Chair of the Department of Mechatronics Engineering, the Laboratory Support Technician shall provide comprehensive services in support of laboratory courses within the Department of Mechatronics Engineering. ESSENTIAL DUTIES AND RESPONSIBILITIES include, but are not limited to, the following : Prepare, set-up, and clean up materials for labs courses that include engineering and physics, and/or other related fields as needed. Document lab set-ups and organize materials for future labs. Work with faculty and staff to plan, coordinate, and troubleshoot lab activities. Proactively plan ahead to meet multiple deadlines and priorities. Accurately maintain existing inventories of lab materials, supplies, equipment, and chemicals. Organize materials and lab spaces in collaboration with other lab staff. Provide specifications for ordering laboratory materials, reagents, and lab and field equipment. Assist in scheduling and checkout of shared resources among multiple users. Troubleshoot, maintain, and perform minor repairs on specialized lab and field instrumentation, including computer interfaces for data collection. May interact with repair technicians from outside the department. Responsible for the purchase, installation, and maintenance of engineering laboratories Develop familiarity with safety aspects of all materials, equipment, and procedures used in engineering and science labs. Organize and update safety information for access by students, instructors, and staff. Prepare biological and chemical hazards for disposal as needed, acting in compliance with relevant regulations and guidelines. Share safety information with staff, faculty, and students. Design, fabrication and construction for unique, highly technical and prototype equipment or systems Provide training as necessary for faculty, staff, and students in the use of specialized instrumentation and protocols. Train student workers in safety aspects of specialized procedures. Develop protocols for equipment use. Train students in fabrication equipment such as 3D printers, CNC, lathes, among others. Other Functions : Performs other job-related duties and special projects as assigned. KNOWLEDGE, SKILLS AND ABILITIES : Knowledge of the principles of performing support services; knowledge of the principles, methods, and techniques related to the discipline and the curriculum; knowledge of the materials and supplies in the curriculum and the curriculum and their uses. Ability to: plan, organize, and schedule activities; ability to operate technical equipment related to the discipline; ability to maintain records; ability to adjust and perform simple maintenance of technical and scientific equipment. MINIMUM QUALIFICATIONS : Equivalent to three years of experience providing instructional support services for a related unit or discipline, or in producing materials or supplies or repairing equipment in a discipline related to the area to which assigned. OR the equivalent to two years of college with 16 semester units in courses involving extensive use of materials, supplies, or equipment and in a discipline related to the area may be substituted for one year of the required experience; OR the equivalent to four years of college with 16 semester units in courses involving extensive use of materials, supplies, or equipment and in a discipline related to the area to which assigned may be substituted for two years of the required experience. SPECIALIZED SKILLS : Ability to: adjust, trouble-shoot, and perform simple maintenance of scientific and engineering instrumentation; pay attention to detail and follow verbal and written instructions; work both independently and interdependently in a rapidly evolving setting; read and write at a level appropriate to the duties of the position; communicate verbally and in writing in a cooperative, professional, and tactful manner within a diverse team of students, faculty, and support staff. Use electronic and electrical test equipment, such as multimeters, oscilloscopes, and function generators. Skilled troubleshooting, repair, maintenance, calibration, and assembly of mechanical, pneumatic, hydraulic, and electro, mechanical instructional support equipment. Use fabrication equipment, such as CNC router, lathe, laser cutters, 3D printers, and welding. PREFERRED QUALIFICATIONS : Bachelor's degree or equivalent in Engineering, Engineering Technology, Industrial Automation, or related discipline with coursework in engineering, manufacturing, or closely related discipline with at least two (2) years of experience as a technician where duties included direct responsibility for preparing labs for college courses in engineering or closely related discipline. Experience operating, maintaining, and troubleshooting engineering equipment and lab instrumentation used in college-level courses. Experience handling chemicals and hazardous waste safely; specifying scientific supplies and equipment for procurement; and with the safe operation of hand and power tools. Experience with electronic equipment, pneumatics, machining tools, lathes, welding, CNC routers, mills, among other equipment. RSS or equivalent chemical inventory database and experience with tracking scientific supplies and equipment. Technical fluency in the use of Microsoft Office Professional, including with Excel and Access, or similar programs; Google Workspace (Gmail, Docs, Sheets, Drive, Calendar, Forms, etc.); CAD software, Oracle-PeopleSoft/Common Management System or equivalent student, HR and Financial information systems; intranet drives; and internet browsers. SPECIAL CONDITIONS OF EMPLOYMENT & POSITION DESIGNATIONS : All offers of employment are contingent upon the successful completion of a background check (including a criminal records check). The person holding this position is considered a “mandated reporter” under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. This position will have a duty to report to the Campus Title IX Officer information pertaining to victims of sex discrimination, sexual harassment, sexual misconduct, dating/domestic violence, and stalking as required by CSU Executive Order 1095 . This position has been designated as a sensitive position with: responsibility for the care, safety and security of people (including children and minors), animals and CSU property; access to controlled or hazardous substances; access to and responsibility for detailed personally identifiable Level 1 confidential information about students, faculty, staff or alumni that is protected, personal or sensitive as defined in the CSU Information Security Data Classification Standards ; and responsibility for operating commercial vehicles, machinery or equipment that could pose environmental hazards or cause injury, illness, or death. This position is required to comply with confidentiality requirements outlined in the Department of Education’s Family Educational Rights and Privacy and California’s Educational Code Chapter 13 regarding sensitive student issues. Must possess and maintain a valid license to drive in the State of California, pass the Defensive Training Class, and be insurable under the University's liability coverage. May require occasional evenings and/or weekend work. PHYSICAL ENVIRONMENT : Position requires frequent movement; bending; climbing; reaching; standing; lifting objects up to 40 pounds; and applying force. Office environment with standard equipment and tasks. Position requires working at a computer and desk for extended periods of time. Requires travel between campus offices and off-campus locations. This position requires, but is not limited to, performing work indoors and outdoors in a variety of local weather conditions and environments. Must participate in all OSHA and University safety programs, as required, and follow all work safety guidelines. Involves working with chemicals; compressed gases; biological materials; glass and other sharps. Work involves use and maintenance of scientific equipment, risk of being exposed to fire, fumes, chemical and biological hazards, and electrical shock. The health and safety of our students, faculty, and staff remain our highest priority. While on campus, students, faculty, staff, and the community will be expected to follow all campus safety mandates. BENEFITS/PERKS : CSUMB offers a premium benefit package that includes outstanding vacation, health, dental and vision plans; membership in the California Public Employees Retirement System (CalPERS); and 15 paid holidays a year. For more information, visit Employee Benefits Summary . As a perk, the University Corporation at CSU Monterey Bay provides access to affordable campus housing based on availability; visit Schoonover Employee Housing for more information. APPLICATION PROCEDURE : For full consideration, applicants must complete the required online application prior to the priority screen date found at Careers at CSUMB . Application submissions received after the application screening date will be reviewed at the discretion of the University. Materials submitted become the property of CSUMB and will not be returned. CSUMB is not a sponsoring agency for staff or management positions. Reasonable accommodations will be provided for qualified applicants with disabilities who self-disclose by contacting Human Resources at (831) 582-3389 or emailing humanresources@csumb.edu . All employees must be eligible for employment in the U.S. GENERAL INFORMATION : CSUMB hires only individuals lawfully authorized to work in the United States and is an E-Verify employer. In compliance with federal crime awareness and campus security legislation, including the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics, you can view the notice of availability and access the Cal State University, Monterey Bay annual security and fire safety reports at https://csumb.edu/clery/asr-and-fsr-notices-availability/ . CSUMB is a smoke and tobacco-free campus. EQUAL OPPORTUNITY EMPLOYER : CSUMB is an Equal Opportunity employer seeking to recruit and support a broadly diverse community of faculty and staff. We value and celebrate diversity in all its forms and strive to foster an inclusive culture built on respect that affirms inter-group relations and builds cohesion. We consider qualified applicants for employment for their anticipated contributions and without regard to race, color, religion, national origin, age, gender, gender identity or expression, sexual orientation, genetic information, medical condition, pregnancy, marital status, veteran status, or disability. Advertised: Jan 22 2024 Pacific Standard Time Applications close: Closing Date/Time:
CITY OF KINGMAN, AZ
City of Kingman, Arizona, United States
Job Summary CITY OF KINGMAN SIGNAL AND LIGHTING TECHNICIAN I PUBLIC WORKS - STREETS DIVISION $45,385.60 - $54,454.40/ANNUALLY $21.82 - $26.18/HOURLY TYPICAL SCHEDULE - 5 DAYS/WEEK - MONDAY TO FRIDAY APRIL - SEPTEMBER 5AM - 1PM OCTOBER - MARCH 6AM - 2PM POSITION IS FLSA NON-EXEMPT - SUBJECT TO OVERTIME/CALL-OUT PAY Learn more about our Benefits & Wellness Incentives . APPLICATIONS MUST BE SUBMITTED BY 5/30/24 5:00PM The Signal and Lighting Technician I position require a CDL B. Candidates that do not currently possess the CDL, in general, should not be discouraged from applying. The City of Kingman works closely with local partners to offer paid training. Commercial Truck Driver Training (Paid Training) Our local CDL program consists of four weeks of classroom instruction and behind-the-wheel training with an experienced and highly qualified instructor. The cost of training may be covered in full by scholarship through AZ@Work or by the City of Kingman. We will assist you through the process each step of the way and you will get paid a $21.82* hourly wage while you train. Six Months On-the-Job (Paid Training) Once you graduate from the Driving Academy and with the appropriate class of license and any applicable endorsements, you will begin on-the job paid training during your 6-month introductory period. OVERVIEW The City of Kingman is located in Mohave County approximately 100 miles southeast of Las Vegas and 195 miles northwest of Phoenix nestled between the beautiful Cerbat and Hualapai mountain ranges along historic Route 66. In 2019, Reader’s Digest named Kingman one of the “Nicest Places in Arizona” for its thoughtful residents and spirit of generosity. In addition to its small-town look and feel, the area also offers a wide range of recreational activities that include hiking, bike and ATV trails, camping, golf, beautiful parks, historical attractions, nearby lakes and the Colorado River. With more than 400 full and part-time employees across 30 divisions, the City of Kingman provides exceptional public services to over 30,000 residents. Our focus on high-quality customer service, safety and teamwork underpins our efforts to foster an atmosphere where citizens and businesses can thrive. For more information about the City of Kingman, please see our Open Finance Portal , Choose Kingman Economic Development page and our Go Kingman tourism page for more information. GENERAL DESCRIPTION OF POSITION Performs skilled level electrical work involving installation, inspection, maintenance, alteration and repairs of electronic traffic control signals and devices, pole-mounted outdoor lighting, associated mechanical equipment and solid-state traffic control devices in accordance with standard practices of the electrical trade. Maintains an on-call status to ensure the safe operation of the traffic signals, traffic control devices, and City lighting systems; performs other duties as required within the scope of the classification. SUPERVISION RECEIVED Work is performed with considerable independence under the general supervision of a Crew Leader or Maintenance Supervisor. Work is reviewed for results obtained and for conformance with technical standards. May receive cross-functional guidance from Signal Tech II. SUPERVISION EXERCISED May provide instruction and advice to other employees on an assignment basis. May supervise temporary employees, community service workers, and DOC Inmate workers as directed, or as assigned by Maintenance Supervisor. Minimum Qualifications/Special Requirements EDUCATION AND EXPERIENCE Graduation from high school diploma or GED equivalent supplemented by technical/trade school coursework or apprenticeship in electrical trades work. Completion of a recognized four year electrical apprenticeship program, or equivalent training, or three years of experience as a skilled electrician/Traffic Signal Technician. Other combinations of experience and education that meet the minimum requirements may be substituted. Any combination of experience and training which demonstrates the knowledge and experience to perform the work. SPECIAL REQUIREMENTS Valid Arizona Commercial Driver's License at a minimum level of Class B or ability to obtain one within six (6) months of hire to position. May require certification or demonstrated competence as electrician Possess Level One International Municipal Signal Association (IMSA) Traffic Signal Certification within one (1) year of hire to position. Based on assignment, may be required to participate and obtain NIMS (National Incident Management System) training certifications. Essential Functions Essential Functions are not intended to be an exhaustive list of all responsibilities, duties and skills. They are intended to be accurate summaries of what the job classification involves and what is required to perform it. Diagnoses and repairs traffic signal systems using hand tools, power tools, and electrical diagnostic equipment; performs repairs on poles, signal heads, signs, vehicle sensors, cabinet-electronics and microprocessors, switches, communications, timing and all other subsystems; diagnoses and prioritizes the steps necessary for each situation and executes repairs. Installs, alters, maintains, diagnoses, and repairs electrical wiring systems and equipment, both high and low voltage (i.e., traffic signal systems, traffic control devices, electrical boxes, motors, streetlights, and other electronic appliances and housings). Locates short and open circuit conditions in wiring systems. Replaces worn and/or damaged components in traffic control devices and electrical streetlight fixtures. Installs and maintains electrical motors, signal heads, signal cables, span wire, and traffic signal poles and pedestals. Inspects a wide variety of defective electronic equipment to determine malfunctions to perform repair work. Reads and interprets blueprints, schematic diagrams, logic charts, and manufacturer's manuals to isolate malfunctioning components. Performs scheduled preventative maintenance on traffic signals and street lighting through visual inspections, hardware and software equipment replacement, group re-lamping, and equipment testing. Performs routine maintenance, painting of backplates, visors, signal heads, signal poles, light poles and mast arms. Performs scheduled preventative maintenance on traffic signals and street lighting through visual inspections, hardware and software equipment replacement, group re-lamping, and equipment testing. Documents information on preventive maintenance file on electrical equipment and machinery and monitors a preventative maintenance program. Operates aerial equipment and pneumatic equipment in the installation and repair of electrical equipment. Participates in the blueprint plan review process for lighting and signal projects. Responds to emergency call outs. Operate and work from an aerial bucket truck, or crane truck for repairs or for removal and placement of poles and equipment. Replenishes electrical parts and supplies and maintains an inventory. Performs construction, maintenance and/ or mechanical work as needed or assigned on industrial and automotive equipment. Cleans and maintains tools, equipment and work space. Supervises and leads DOC Inmate Labor as trained and assigned. Communicates and acts in a professional manner with the public, co-workers, and work contacts. Provides excellent customer service to all contacts. Regular attendance is an essential function of this job to ensure continuity. May be required to work early mornings, evenings, nights, holidays or weekends as needed. Performs all work duties and activities in accordance with National Electric Code, relevant City codes, City policies and procedures; follows safety policies and practices, works in a safe manner, and reports unsafe activity and conditions. PERIPHERAL DUTIES Maintains effective contact with other city departments and vendors when making electrical repairs or to obtain electrical parts and supplies. Performs electrical maintenance of city-building and related duties and special assignments as required or as needed. May serve on a variety of employee committees. NECESSARY KNOWLEDGE, SKILLS AND ABILITIES Knowledge and skill in use of methods, materials and tools used in electrical construction and maintenance work, including installation of all sizes of electrical conduit, cables, wires, switches, automatic starting equipment, and pole line construction. Occupational hazards and necessary safety precautions of the trade. Considerable knowledge of the principles of electrical theory as applied to electrical circuits and wiring systems and ability to apply this knowledge to work situations. Working knowledge of the methods, procedures, materials, and tools related to the maintenance and installation of electrically operated traffic control devices, electro-mechanic traffic control devices, and electricity as it relates to traffic control devices. Principles and theories of electronics as related to the repair of digital electronic traffic control devices. Test equipment and testing procedures used in the calibration and repair of digital and analog electronic equipment. Work zone traffic control signing and flagging in accordance with MUTCD standards. Skill in performing journey-level trades electrical installation and maintenance and locating and adjusting faulty or defective electrical systems and equipment. Preparing and maintaining accurate records. Working in a team environment. Application of first aid methods including artificial respiration. Ability to read, interpret, and analyze applicable federal, state, and city codes, Traffic Signal and Pole Lighting manuals, industry periodicals and electrical diagrams, schematics, blueprints, specifications and sketches. Install, inspect, maintain and repair traffic signal and pole-mounted outdoor lighting. Work at heights greater than 10 feet. Work according to prescribed safety and professional standards. Direct jobs safely, efficiently and economically. Understand and follow complex oral and written instructions. Work under varying weather conditions. Perform basic mathematical calculations. Distinguish between the full range of colors in the color spectrum to work with electrical wires, electronic components, traffic signal and street lights. Work safely without presenting a direct threat to self or others. Establish effective, cooperative working relationships with other employees, supervisors and the public. Wear OSHA required personal protective equipment including safety restraints, hard hat. Miscellaneous WORK ENVIRONMENT The work environment characteristics attached to the job description are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. See Physical Demands. COMMITMENT TO SAFETY & WELLNESS It is the policy of the City of Kingman to ensure a safe, healthful workplace for all its employees. It requires that every person in the organization assumes the responsibility of individual and organizational safety. Injury and illness losses from incidents are costly and preventable. The City of Kingman will employ an effective accident and illness prevention program and a comprehensive wellness program that involves all its employees in the effort to eliminate workplace hazards and promote employee health and wellness. All employees are expected and encouraged to participate in safety and wellness program activities including the following: reporting hazards, unsafe work practices and accidents immediately to their supervisors or a safety committee representative; wearing required personal protective equipment; and participating in and supporting safety committee activities. DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel in this position. This job description is subject to change as the needs and requirements of the position changes. FIND YOUR REWARDING CAREER WITH US! Personal Growth Opportunities ~ Meaningful and Challenging Work ~ Public Service Community Spirit ~ Training and Development 2023-2024 Benefit Guide (PDF) Health Excellent medical, dental and vision insurance. Telemedicine available through BlueCare Anywhere for general medical and behavioral health. Flexible spending (FSA) or health savings accounts (HSA). Employer contribution to HSA equivalent to 50% of plan-year deductible. This is currently $750 for Single Coverage and $1,500 for Family Coverage. Employer-paid group basic life insurance coverage for employee and dependents on medical plan. Supplemental group insurance and third-party options available. Virgin Pulse, our comprehensive well-being platform designed to push you towardsgood health in mind, body and spirit. Participation incentives with up to $300 redeemable annually. Work/Life support services through the SupportLincEmployee Assistance Program (EAP). Six free counseling visits annually. Leave 12 paid holidays , including a floating birthday holiday each year. 16-35 paid vacation days per year. 6.15 hrs. 1-5 years; 7.69 hrs. 5-10 yrs.; 9.23 hrs. 10-15 yrs.; 10.77 hrs. 15+ yrs. Shift fire personnel accrue leave at 1/3 more per pay period. 3.69 sick hrs per pay period (approx. 9-12 sick days per year). Shift fire personnel accrue leave at 1/3 more per pay period. Part-time/seasonal employees earn 1 hours of sick time for every 30 hours worked. Other leave types available, including: 10 hours of Volunteer Time Off (VTO). Up to 5 days for bereavement. Jury Duty. Military Training, and more. Leave donation program. Financial Tuition reimbursement up to $4,500 annually. Shift differential pay (2nd & 3rd shift). Bonus Programs. Skill-based, Certification & Bilingual Pay. Clothing Allowance for Uniformed Personnel. Recognition & Appreciation Quarterly Performance Conversations (TrakStar). Mission, Vision, Values (MVV) Excellence Awards. Safety Awards. Service Awards at 5, 10, 15, 20+ years of service. Biannual All-Employee BBQ Lunch. Annual Employee Pool Party. Retirement City matching to AZ State Retirement System & Long Term Disability (ASRS). Additional retirement solutions available through optional third-party on pre-tax basis, including457-deferred compensation and Roth IRA. Closing Date/Time: 5/30/2024 5:00 PM Arizona
Job Summary CITY OF KINGMAN SIGNAL AND LIGHTING TECHNICIAN I PUBLIC WORKS - STREETS DIVISION $45,385.60 - $54,454.40/ANNUALLY $21.82 - $26.18/HOURLY TYPICAL SCHEDULE - 5 DAYS/WEEK - MONDAY TO FRIDAY APRIL - SEPTEMBER 5AM - 1PM OCTOBER - MARCH 6AM - 2PM POSITION IS FLSA NON-EXEMPT - SUBJECT TO OVERTIME/CALL-OUT PAY Learn more about our Benefits & Wellness Incentives . APPLICATIONS MUST BE SUBMITTED BY 5/30/24 5:00PM The Signal and Lighting Technician I position require a CDL B. Candidates that do not currently possess the CDL, in general, should not be discouraged from applying. The City of Kingman works closely with local partners to offer paid training. Commercial Truck Driver Training (Paid Training) Our local CDL program consists of four weeks of classroom instruction and behind-the-wheel training with an experienced and highly qualified instructor. The cost of training may be covered in full by scholarship through AZ@Work or by the City of Kingman. We will assist you through the process each step of the way and you will get paid a $21.82* hourly wage while you train. Six Months On-the-Job (Paid Training) Once you graduate from the Driving Academy and with the appropriate class of license and any applicable endorsements, you will begin on-the job paid training during your 6-month introductory period. OVERVIEW The City of Kingman is located in Mohave County approximately 100 miles southeast of Las Vegas and 195 miles northwest of Phoenix nestled between the beautiful Cerbat and Hualapai mountain ranges along historic Route 66. In 2019, Reader’s Digest named Kingman one of the “Nicest Places in Arizona” for its thoughtful residents and spirit of generosity. In addition to its small-town look and feel, the area also offers a wide range of recreational activities that include hiking, bike and ATV trails, camping, golf, beautiful parks, historical attractions, nearby lakes and the Colorado River. With more than 400 full and part-time employees across 30 divisions, the City of Kingman provides exceptional public services to over 30,000 residents. Our focus on high-quality customer service, safety and teamwork underpins our efforts to foster an atmosphere where citizens and businesses can thrive. For more information about the City of Kingman, please see our Open Finance Portal , Choose Kingman Economic Development page and our Go Kingman tourism page for more information. GENERAL DESCRIPTION OF POSITION Performs skilled level electrical work involving installation, inspection, maintenance, alteration and repairs of electronic traffic control signals and devices, pole-mounted outdoor lighting, associated mechanical equipment and solid-state traffic control devices in accordance with standard practices of the electrical trade. Maintains an on-call status to ensure the safe operation of the traffic signals, traffic control devices, and City lighting systems; performs other duties as required within the scope of the classification. SUPERVISION RECEIVED Work is performed with considerable independence under the general supervision of a Crew Leader or Maintenance Supervisor. Work is reviewed for results obtained and for conformance with technical standards. May receive cross-functional guidance from Signal Tech II. SUPERVISION EXERCISED May provide instruction and advice to other employees on an assignment basis. May supervise temporary employees, community service workers, and DOC Inmate workers as directed, or as assigned by Maintenance Supervisor. Minimum Qualifications/Special Requirements EDUCATION AND EXPERIENCE Graduation from high school diploma or GED equivalent supplemented by technical/trade school coursework or apprenticeship in electrical trades work. Completion of a recognized four year electrical apprenticeship program, or equivalent training, or three years of experience as a skilled electrician/Traffic Signal Technician. Other combinations of experience and education that meet the minimum requirements may be substituted. Any combination of experience and training which demonstrates the knowledge and experience to perform the work. SPECIAL REQUIREMENTS Valid Arizona Commercial Driver's License at a minimum level of Class B or ability to obtain one within six (6) months of hire to position. May require certification or demonstrated competence as electrician Possess Level One International Municipal Signal Association (IMSA) Traffic Signal Certification within one (1) year of hire to position. Based on assignment, may be required to participate and obtain NIMS (National Incident Management System) training certifications. Essential Functions Essential Functions are not intended to be an exhaustive list of all responsibilities, duties and skills. They are intended to be accurate summaries of what the job classification involves and what is required to perform it. Diagnoses and repairs traffic signal systems using hand tools, power tools, and electrical diagnostic equipment; performs repairs on poles, signal heads, signs, vehicle sensors, cabinet-electronics and microprocessors, switches, communications, timing and all other subsystems; diagnoses and prioritizes the steps necessary for each situation and executes repairs. Installs, alters, maintains, diagnoses, and repairs electrical wiring systems and equipment, both high and low voltage (i.e., traffic signal systems, traffic control devices, electrical boxes, motors, streetlights, and other electronic appliances and housings). Locates short and open circuit conditions in wiring systems. Replaces worn and/or damaged components in traffic control devices and electrical streetlight fixtures. Installs and maintains electrical motors, signal heads, signal cables, span wire, and traffic signal poles and pedestals. Inspects a wide variety of defective electronic equipment to determine malfunctions to perform repair work. Reads and interprets blueprints, schematic diagrams, logic charts, and manufacturer's manuals to isolate malfunctioning components. Performs scheduled preventative maintenance on traffic signals and street lighting through visual inspections, hardware and software equipment replacement, group re-lamping, and equipment testing. Performs routine maintenance, painting of backplates, visors, signal heads, signal poles, light poles and mast arms. Performs scheduled preventative maintenance on traffic signals and street lighting through visual inspections, hardware and software equipment replacement, group re-lamping, and equipment testing. Documents information on preventive maintenance file on electrical equipment and machinery and monitors a preventative maintenance program. Operates aerial equipment and pneumatic equipment in the installation and repair of electrical equipment. Participates in the blueprint plan review process for lighting and signal projects. Responds to emergency call outs. Operate and work from an aerial bucket truck, or crane truck for repairs or for removal and placement of poles and equipment. Replenishes electrical parts and supplies and maintains an inventory. Performs construction, maintenance and/ or mechanical work as needed or assigned on industrial and automotive equipment. Cleans and maintains tools, equipment and work space. Supervises and leads DOC Inmate Labor as trained and assigned. Communicates and acts in a professional manner with the public, co-workers, and work contacts. Provides excellent customer service to all contacts. Regular attendance is an essential function of this job to ensure continuity. May be required to work early mornings, evenings, nights, holidays or weekends as needed. Performs all work duties and activities in accordance with National Electric Code, relevant City codes, City policies and procedures; follows safety policies and practices, works in a safe manner, and reports unsafe activity and conditions. PERIPHERAL DUTIES Maintains effective contact with other city departments and vendors when making electrical repairs or to obtain electrical parts and supplies. Performs electrical maintenance of city-building and related duties and special assignments as required or as needed. May serve on a variety of employee committees. NECESSARY KNOWLEDGE, SKILLS AND ABILITIES Knowledge and skill in use of methods, materials and tools used in electrical construction and maintenance work, including installation of all sizes of electrical conduit, cables, wires, switches, automatic starting equipment, and pole line construction. Occupational hazards and necessary safety precautions of the trade. Considerable knowledge of the principles of electrical theory as applied to electrical circuits and wiring systems and ability to apply this knowledge to work situations. Working knowledge of the methods, procedures, materials, and tools related to the maintenance and installation of electrically operated traffic control devices, electro-mechanic traffic control devices, and electricity as it relates to traffic control devices. Principles and theories of electronics as related to the repair of digital electronic traffic control devices. Test equipment and testing procedures used in the calibration and repair of digital and analog electronic equipment. Work zone traffic control signing and flagging in accordance with MUTCD standards. Skill in performing journey-level trades electrical installation and maintenance and locating and adjusting faulty or defective electrical systems and equipment. Preparing and maintaining accurate records. Working in a team environment. Application of first aid methods including artificial respiration. Ability to read, interpret, and analyze applicable federal, state, and city codes, Traffic Signal and Pole Lighting manuals, industry periodicals and electrical diagrams, schematics, blueprints, specifications and sketches. Install, inspect, maintain and repair traffic signal and pole-mounted outdoor lighting. Work at heights greater than 10 feet. Work according to prescribed safety and professional standards. Direct jobs safely, efficiently and economically. Understand and follow complex oral and written instructions. Work under varying weather conditions. Perform basic mathematical calculations. Distinguish between the full range of colors in the color spectrum to work with electrical wires, electronic components, traffic signal and street lights. Work safely without presenting a direct threat to self or others. Establish effective, cooperative working relationships with other employees, supervisors and the public. Wear OSHA required personal protective equipment including safety restraints, hard hat. Miscellaneous WORK ENVIRONMENT The work environment characteristics attached to the job description are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. See Physical Demands. COMMITMENT TO SAFETY & WELLNESS It is the policy of the City of Kingman to ensure a safe, healthful workplace for all its employees. It requires that every person in the organization assumes the responsibility of individual and organizational safety. Injury and illness losses from incidents are costly and preventable. The City of Kingman will employ an effective accident and illness prevention program and a comprehensive wellness program that involves all its employees in the effort to eliminate workplace hazards and promote employee health and wellness. All employees are expected and encouraged to participate in safety and wellness program activities including the following: reporting hazards, unsafe work practices and accidents immediately to their supervisors or a safety committee representative; wearing required personal protective equipment; and participating in and supporting safety committee activities. DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel in this position. This job description is subject to change as the needs and requirements of the position changes. FIND YOUR REWARDING CAREER WITH US! Personal Growth Opportunities ~ Meaningful and Challenging Work ~ Public Service Community Spirit ~ Training and Development 2023-2024 Benefit Guide (PDF) Health Excellent medical, dental and vision insurance. Telemedicine available through BlueCare Anywhere for general medical and behavioral health. Flexible spending (FSA) or health savings accounts (HSA). Employer contribution to HSA equivalent to 50% of plan-year deductible. This is currently $750 for Single Coverage and $1,500 for Family Coverage. Employer-paid group basic life insurance coverage for employee and dependents on medical plan. Supplemental group insurance and third-party options available. Virgin Pulse, our comprehensive well-being platform designed to push you towardsgood health in mind, body and spirit. Participation incentives with up to $300 redeemable annually. Work/Life support services through the SupportLincEmployee Assistance Program (EAP). Six free counseling visits annually. Leave 12 paid holidays , including a floating birthday holiday each year. 16-35 paid vacation days per year. 6.15 hrs. 1-5 years; 7.69 hrs. 5-10 yrs.; 9.23 hrs. 10-15 yrs.; 10.77 hrs. 15+ yrs. Shift fire personnel accrue leave at 1/3 more per pay period. 3.69 sick hrs per pay period (approx. 9-12 sick days per year). Shift fire personnel accrue leave at 1/3 more per pay period. Part-time/seasonal employees earn 1 hours of sick time for every 30 hours worked. Other leave types available, including: 10 hours of Volunteer Time Off (VTO). Up to 5 days for bereavement. Jury Duty. Military Training, and more. Leave donation program. Financial Tuition reimbursement up to $4,500 annually. Shift differential pay (2nd & 3rd shift). Bonus Programs. Skill-based, Certification & Bilingual Pay. Clothing Allowance for Uniformed Personnel. Recognition & Appreciation Quarterly Performance Conversations (TrakStar). Mission, Vision, Values (MVV) Excellence Awards. Safety Awards. Service Awards at 5, 10, 15, 20+ years of service. Biannual All-Employee BBQ Lunch. Annual Employee Pool Party. Retirement City matching to AZ State Retirement System & Long Term Disability (ASRS). Additional retirement solutions available through optional third-party on pre-tax basis, including457-deferred compensation and Roth IRA. Closing Date/Time: 5/30/2024 5:00 PM Arizona
Cal State University (CSU) LA
5151 State University Drive, Los Angeles, CA 90032, USA
Job No: 528131; 6/9/2023 MAKERSPACE PROJECT COORDINATOR Equipment Technician II, Electro-Mechanical College of Engineering Computer Science and Technology, Dean’s Office Salary Range : $4211 - $7617/Monthly Work Schedule : Full-Time, Monday-Friday 8:00 a.m. to 5:00 p.m.; non-exempt classification. Essential Functions : Under the general supervision of ECST (Engineering, Computer Science, and Technology) Associate Dean who oversees Technical Operations in the College, the incumbent will primarily assist students, staff, and faculty be successful in undertaking the design process. This includes the generation of project requirements, ideation, concept selection, engineering analysis, prototyping, material selection and procurement, manufacturing, fabrication, and assembly of designs. The incumbent will also assist in the operation of the ECST Labs and ECST Makerspace, assist in maintaining the equipment in the Makerspace, assist in supervising the use of equipment and tools, and provide assistance to faculty or lab coordinators to develop institutional/training materials on the safe use of materials, supplies, and equipment. Incumbent will assist in the supervision of the student shop stewards. Work at this level requires independent knowledge of design principles and extensive practical experience. Required Qualifications & Experience : Equivalent to two years of journey-level or skilled experience in the maintenance, repair, and operation of scientific or technical equipment in the specialty area to which assigned such as mechanical, electromechanical, electronics or in the specialized category including construction and fabrication and some precision work or requiring trade or craft skills working with a variety of unique materials. Two years of semi-skilled experience maintaining and repairing scientific or technical equipment or related experience in the type of equipment to which assigned as part of instructional support activities may be substituted for one year of the required experience. Two years of trade school or technical arts training with specialization in the type of equipment repair to which assigned, completion of an apprenticeship program, or completion of a full military specialization in the required type of equipment maintenance and repair for one year of the required experience. Work at this level requires independent knowledge of design principles and extensive practical experience. Comprehensive knowledge of the methods, materials, tools and equipment used in the area of electro-mechanical labs and shops; and knowledge of design and safety protocols. Ability to: train and supervise students; plan, organize, and coordinate the work of technical projects; design, fabricate, and assemble devices and systems; install, replace, repair, and maintain a wide variety of equipment for the Makerspace, shops, and electro-mechanical labs; establish and maintain cooperative relationships; use modern productivity software; and train and supervise students. The incumbent must have a demonstrated interest and/or ability in working in a multicultural/multiethnic environment. A background check (including a criminal records check) must be completed satisfactorily before any candidate can be offered a position with the CSU. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current CSU employees who may apply for the position. California State University, Los Angeles, as part of the CSU system, is a State of California Employer. As such, the University requires all employees upon date of hire to reside in the State of California. As of January 1, 2022 the CSU Out-of-State Employment Policy prohibits the hiring of employees to perform CSU-related work outside the state of California. Desired Qualifications : Experience working with students and project teams. Experience working in a Makerspace or equivalent. Closing Date : Review of applications will continue until the position is filled; however, the position may close when an adequate number of qualified applications are received. A COMPLETED ON-LINE CAL STATE LA EMPLOYMENT APPLICATION IS REQUIRED. RESUMES WILL NOT BE ACCEPTED IN LIEU OF A COMPLETED APPLICATION. The person holding this position is considered a "mandated reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 revised July 21, 2017, as a condition of employment. In addition to meeting fully its obligations under federal and state law, California State University, Los Angeles is committed to creating a community in which a diverse population can live and work in an atmosphere of tolerance, civility and respect for the rights and sensibilities of each individual. To that end, all qualified individuals will receive equal consideration without regard to economic status, race, ethnicity, color, religion, disability, national origin or cultural background, political views, sex or sexual orientation, gender, or other personal characteristics or beliefs. Candidates must demonstrate ability and/or interest in working in a multicultural/multiethnic environment. Certain positions require fingerprinting. The University actively encourages qualified minorities, women and persons with a disability to apply. Upon request, reasonable accommodation will be provided to individuals with protected disabilities to (a) complete the employment process and (b) perform essential job functions when this does not cause an undue hardship. We are an Equal Opportunity/Title IX Employer. To obtain employment information for the impaired call: TDD Line (323) 343-3670 24-hour Dial-A-Job Line (323) 343-3678 Advertised: Jun 09 2023 Pacific Daylight Time Applications close: Closing Date/Time:
Job No: 528131; 6/9/2023 MAKERSPACE PROJECT COORDINATOR Equipment Technician II, Electro-Mechanical College of Engineering Computer Science and Technology, Dean’s Office Salary Range : $4211 - $7617/Monthly Work Schedule : Full-Time, Monday-Friday 8:00 a.m. to 5:00 p.m.; non-exempt classification. Essential Functions : Under the general supervision of ECST (Engineering, Computer Science, and Technology) Associate Dean who oversees Technical Operations in the College, the incumbent will primarily assist students, staff, and faculty be successful in undertaking the design process. This includes the generation of project requirements, ideation, concept selection, engineering analysis, prototyping, material selection and procurement, manufacturing, fabrication, and assembly of designs. The incumbent will also assist in the operation of the ECST Labs and ECST Makerspace, assist in maintaining the equipment in the Makerspace, assist in supervising the use of equipment and tools, and provide assistance to faculty or lab coordinators to develop institutional/training materials on the safe use of materials, supplies, and equipment. Incumbent will assist in the supervision of the student shop stewards. Work at this level requires independent knowledge of design principles and extensive practical experience. Required Qualifications & Experience : Equivalent to two years of journey-level or skilled experience in the maintenance, repair, and operation of scientific or technical equipment in the specialty area to which assigned such as mechanical, electromechanical, electronics or in the specialized category including construction and fabrication and some precision work or requiring trade or craft skills working with a variety of unique materials. Two years of semi-skilled experience maintaining and repairing scientific or technical equipment or related experience in the type of equipment to which assigned as part of instructional support activities may be substituted for one year of the required experience. Two years of trade school or technical arts training with specialization in the type of equipment repair to which assigned, completion of an apprenticeship program, or completion of a full military specialization in the required type of equipment maintenance and repair for one year of the required experience. Work at this level requires independent knowledge of design principles and extensive practical experience. Comprehensive knowledge of the methods, materials, tools and equipment used in the area of electro-mechanical labs and shops; and knowledge of design and safety protocols. Ability to: train and supervise students; plan, organize, and coordinate the work of technical projects; design, fabricate, and assemble devices and systems; install, replace, repair, and maintain a wide variety of equipment for the Makerspace, shops, and electro-mechanical labs; establish and maintain cooperative relationships; use modern productivity software; and train and supervise students. The incumbent must have a demonstrated interest and/or ability in working in a multicultural/multiethnic environment. A background check (including a criminal records check) must be completed satisfactorily before any candidate can be offered a position with the CSU. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current CSU employees who may apply for the position. California State University, Los Angeles, as part of the CSU system, is a State of California Employer. As such, the University requires all employees upon date of hire to reside in the State of California. As of January 1, 2022 the CSU Out-of-State Employment Policy prohibits the hiring of employees to perform CSU-related work outside the state of California. Desired Qualifications : Experience working with students and project teams. Experience working in a Makerspace or equivalent. Closing Date : Review of applications will continue until the position is filled; however, the position may close when an adequate number of qualified applications are received. A COMPLETED ON-LINE CAL STATE LA EMPLOYMENT APPLICATION IS REQUIRED. RESUMES WILL NOT BE ACCEPTED IN LIEU OF A COMPLETED APPLICATION. The person holding this position is considered a "mandated reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 revised July 21, 2017, as a condition of employment. In addition to meeting fully its obligations under federal and state law, California State University, Los Angeles is committed to creating a community in which a diverse population can live and work in an atmosphere of tolerance, civility and respect for the rights and sensibilities of each individual. To that end, all qualified individuals will receive equal consideration without regard to economic status, race, ethnicity, color, religion, disability, national origin or cultural background, political views, sex or sexual orientation, gender, or other personal characteristics or beliefs. Candidates must demonstrate ability and/or interest in working in a multicultural/multiethnic environment. Certain positions require fingerprinting. The University actively encourages qualified minorities, women and persons with a disability to apply. Upon request, reasonable accommodation will be provided to individuals with protected disabilities to (a) complete the employment process and (b) perform essential job functions when this does not cause an undue hardship. We are an Equal Opportunity/Title IX Employer. To obtain employment information for the impaired call: TDD Line (323) 343-3670 24-hour Dial-A-Job Line (323) 343-3678 Advertised: Jun 09 2023 Pacific Daylight Time Applications close: Closing Date/Time: