City of Sacramento, CA
Sacramento, California, United States
THE POSITION With supervisor approval, incumbents may be eligible for intermittent remote work; however, they must physically reside within the Sacramento region or have the ability to regularly report to a City of Sacramento physical worksite with little notice. The City of Sacramento Community Development Department is seeking a Building Inspector to join the Building Division’s addressing team. This position works on assigning and managing street names and numerical addresses for parcels of land and buildings. Working with a dedicated team, the position will coordinate with multiple city departments and outside agencies on street and address information for new and existing buildings, lots, streets, and alleys. This position will perform research, process address requests, assign addresses, and assist citizens, businesses, and developers on address-related questions. IDEAL CANDIDATE STATEMENT The ideal candidate will possess excellent customer service and interpersonal abilities, keen attention to detail, and the ability to solve problems. The ideal candidate should have experience reading plans of various construction types and designated occupancy groups. The ideal candidate is able to work independently and use good judgement to make decisions on addresses. BUILDING INSPECTOR I/ BUILDING INSPECTOR II/ BUILDING INSPECTOR III DEFINITION To perform rule specific inspection activities in the review of plans and inspections of new building projects, alterations, and repairs, to enforce a variety of codes, ordinances, and established standards to achieve compliance, and to perform other duties and responsibilities as required. Depending on qualifications, incumbents may be assigned to any one, or any combination of inspection discipline areas as: Building Specialty Inspection Plumbing/Mechanical Specialty Inspection Electrical Specialty Inspection Roofing Combination Inspection Residential Combination Inspection Multi-Family Residential and Light Commercial Combination Inspection Residential Combination & Structural Plan Review Non-Structural Building Plan Review Plumbing/Mechanical Plan Review Electrical Plan Review Project Management Enforcement Case Management Building Specialty Inspection assignments concern inspections of residential and commercial construction and applicable methods, practices, materials, codes, ordinances and policies used in construction work as related to building construction. Plumbing/Mechanical Specialty Inspection assignments concern inspections of residential and commercial construction and applicable methods, practices, materials, codes, ordinances and policies used in construction work as related to plumbing and mechanical construction. Electrical Specialty Inspection assignments concern inspections of residential and commercial construction and applicable methods, practices, materials, codes, ordinances and policies used in construction work as related to electrical construction. Roofing Combination Inspection assignments concern inspections on roofing installations on one and two family residences, multi- family and commercial buildings, including building, plumbing, mechanical, and electrical inspections, incidental to the roofing work. Residential Combination Inspection assignments concern inspections on building, plumbing, mechanical, electrical, and roofing installations on one, two, and three family residences for conformance with applicable codes and ordinances. Multi-Family Residential and Light Commercial Combination Inspection assignments concern inspections on building, plumbing, mechanical, electrical, and roofing installations on specific types of building permits for multi-family and commercial buildings qualifying for inspections by Light Commercial Inspectors. Residential Combination & Structural Plan Review assignments concern the review of all building plans and supporting materials for one, two, and three family dwellings, and the acceptance and review of building permits to ensure compliance with various codes, ordinances, and policies; responsible for the preparation of correction notices defining plan deficiencies. Inspects all work, including the most complex installations to support fast track construction and assists with other inspections, including combination inspections. Non-Structural Building Plan Review assignments concern the review of the more complex building plans and supporting materials for commercial and multi-family buildings, and the acceptance and review of building permits to ensure compliance with various codes, ordinances and policies, responsible for the preparation of correction notices defining plan deficiencies; inspects all work, including the most complex installations to support fast track construction, and assists with other inspections disciplines as they relate to non-structural building plan review and construction. Plumbing/Mechanical Plan Review assignments concern the review of all building plans and supporting materials for plumbing and mechanical installations, and the acceptance and review of building permits to ensure compliance with various codes, ordinances and policies; responsible for the preparation of correction notices defining plan deficiencies; inspects all work, including the most complex installations to support fast track construction and assists with other inspection disciplines as they relate to plumbing and mechanical plan review installations. Electrical Plan Review assignments concern the review of all building plans and supporting materials for electrical installations, and the acceptance and review of building permits to ensure compliance with various codes, ordinances and policies; responsible for the preparation of correction notices defining plan deficiencies; inspects all work, including the most complex installations to support fast track construction, and assists with other inspection disciplines as they relate to electrical plan review and installations. Project Management assignments concern the development and administration of contracts for the construction or plan review of facilities, and the inspection of construction to ensure compliance with plans and specifications, and the management and coordination of City or private venture projects. Projects are managed and coordinated from conception through completion. In addition, Project Management assignments assist the project team by coordinating and expediting project approval, plan review, permit issuance, and inspections functions with various departments and agencies. Enforcement Case Management assignments concern complaint investigations for determination of code deficiencies, not necessarily related to active construction; management of contracts to demolish or repair structures with identified deficiencies, and coordination with various organizations and agencies in managing cases. DISTINGUISHING CHARACTERISTICS The Building Inspector class levels are distinguished by the number of inspection disciplines an inspector is recognized to be qualified in based on certification and demonstrable abilities. Positions in this class are flexibly staffed and are automatically flexed to the higher level upon completion of required experience and certification as established per the discipline being flexed to. Appointment to the higher class requires that the employee be performing the full range of duties for the class and meet the qualification standards for the class. Building Inspector I is the entry-level classification in the building inspection series requiring skill and knowledge in any one inspection discipline as illustrated. Incumbents may be assigned to perform the less difficult or complex work in other disciplines as required. Building Inspector II is distinguished from Building Inspector I, in that the former requires the performance of complex duties within two inspection disciplines as illustrated. Incumbents may be assigned to perform the less difficult or complex work in other disciplines as required. Building Inspector III is distinguished from Building Inspector I and II that it requires the incumbent to perform complex duties within three inspection disciplines as illustrated. Incumbents may be assigned to perform the less difficult or complex work in other disciplines as required. Building Inspector I, II, and III is distinguished from Building Inspector IV, by the latter requiring the incumbent to perform complex duties within four inspection disciplines. SUPERVISION RECEIVED AND EXCERCISED Direct and lead supervision is provided by a Supervising Building Inspector or higher-level management personnel. ESSENTIAL DUTIES AND RESPONSIBILITIES - Identify and enforce a variety of codes, ordinances, and standards violations for conformance with plans and specifications. - Inspect workmanship and materials in building construction projects for conformance with plans and specifications, and inspect potentially substandard or dangerous buildings. - Work with diagrams, specifications, plans, and similar documents. - Read and interpret building construction and engineering plan specifications and codes. - Prepare and maintain reports. - Confer with, and assist architects, engineers, contractors, builders, homeowners, tenants and the general public in the field and office; explain and interpret requirements and restrictions, keep records and prepare reports as necessary. - Enter information into the Automated Permit System and the computer for word processing, calendaring, and electronic mail. - Perform basic plan review, routing and project management activities, issue permits, and fee calculations. - Identify illegal construction activity and issues violation notices. - May perform case or project management activities. - Other duties may be performed, not all duties may be performed by each individual holding this classification. QUALIFICATIONS Knowledge of: - Methods, practices, and materials used in construction work relating to a particular inspection discipline. - Proper inspection techniques to examine workmanship and materials. - Data entry and information retrieval from various computer systems necessary for duties. - Safety rules, regulations and practices applied to construction areas and office spaces. - Codes, ordinances, and policies applicable to a particular inspection discipline(s). Ability to: - Read and write the English language at a level of proficiency necessary for effective job performance. - Apply technical knowledge and follow proper inspection techniques to examine workmanship and materials. - Recognize correct installations of building systems; detect defects and faults in construction workmanship and materials. - Detect deviations from plans, regulations, and read and interpret building construction and engineering plans, specifications, and codes. - Understand diagrams, specifications, plans, and similar documents at a level necessary for efficient job performance. - Establish and maintain effective working relationships with staff, engineers, architects, contractors, tenants, owners, and the general public. - Operate a motor vehicle. - Operate a personal computer and other electronic equipment, including field entry devices and cellular phone. - Lift, carry, push, tools, equipment, supplies and plans weighing up to 50 pounds. - Work within confined spaces, climb ladders, work around power and noise producing equipment, work in confined spaces requiring reaching, twisting, turning, kneeling, bending, stooping, squatting, and crouching. - Work in all weather conditions including wet, hot, cold and windy. - Access construction areas within construction sites. Ability to: - Work on uneven work surfaces, trenches, slopes, roof structures, framing, and other conditions found in a construction environment. - Serve on-call, work after hours, weekends and holidays, during emergency situations, and as required. - Anticipate issues and seek resolution through various resources. - Provide service to all customers with a professional and sincere attitude; be customer service oriented. EDUCATION AND EXPERIENCE: Any combination equivalent to experience and education that could likely provide the required knowledge and abilities would be qualifying. A typical way to obtain the knowledge and abilities would be: EDUCATION: Equivalent to the completion of the 12th grade. -AND_ EXPERIENCE: One year of experience performing building inspection work within one or more inspection disciplines for a municipal or county government agency, or three years of journey level experience in the building construction field as a plumber, electrician, carpenter, roofer, or closely related field, within the discipline(s) applied. -OR- EDUCATION: Completion of 21 units of college level courses in building inspection, construction, or other related areas and possession of a certification issued by the I.C.C. or other approved certifying organization in the building construction or plans examiner fields -AND- EXPERIENCE: One year of experience performing a variety of paraprofessional/technical work related to plan checking and inspections. PROOF OF EDUCATION Should education be used to qualify for this position, then proof of education such as, but not limited to, university/college transcripts and degrees should be submitted with your application and will be required at the time of appointment . Unofficial documents and/or copies are acceptable. An applicant with a college degree obtained outside the United States must have education records evaluated by a credentials evaluation service. Evaluation of education records will be due at time of appointment. PROOF OF CERTIFICATION Should certification and/or license be used to qualify for this position, then proof of said certification and /or license should be submitted with your application and will be required at the time of appointment . SPECIAL QUALIFICATIONS DRIVER LICENSE: Possession of a valid California Class C Driver License is required at the time of appointment. Individuals who do not meet this requirement due to a physical disability will be considered for accommodation on a case by case basis. CERTIFICATION: Incumbents must possess certification from an approved certifying organization in their specific work discipline(s) and obtain recognition of competency within one year of appointment. Maintenance of required certifications is a condition for continued employment in this classification. PROBATIONARY PERIOD Employees must complete twelve (12) months of probation at a satisfactory performance level prior to gaining permanent status. In addition, incumbents in each inspection discipline must have the following knowledge, abilities, and experience and/or certification as outlined per discipline. Once appointed, inspectors may qualify and perform work in other disciplines. Building Specialty Inspection, Plumbing/Mechanical Specialty Inspection, or Electrical Specialty Inspection Knowledge of: - Methods, practices, codes, ordinances, policies, and materials used in construction work as it relates to the specialty area, and applies to both residential and commercial construction. Ability to: - Inspect all work, including the more complex or difficult installations within the specialty. Experience and Certification: - Three years of experience as a journey-level craft person in the specialty area, or a closely related discipline, and a working knowledge of building construction. - Certification by I.C.C. or other approved certifying organization in the appropriate specialty categories. - Recognition by the Chief Building Official of the competency to perform both residential and commercial building inspections. Roofing Combination Inspection Knowledge of: - Methods, practices, and materials used in roofing as applied to both residential and commercial construction. - Codes, ordinances and policies that are applied to roofing and all other disciplines that are incidental to roofing work. Ability to: - Recognize correct installation of roofing systems. - Inspect all work, including the more complex and difficult roofing systems. Experience and Certification: - Three years of experience as a journey-level crafts person in the roofing discipline, or a closely related discipline, and working knowledge of roofing construction, including all incidental disciplines associated with roofs. - Certification by I.C.C. or other approved certifying organization as a Building Inspector. - Completion of an approved testing or training program in combination roofing inspection. - Recognition by the Chief Building Official of the competency to perform both residential and commercial inspections within the specialty. Residential Combination Inspection Knowledge of: - Methods, practices, codes, ordinances, policies, and materials used in construction work applied to one, two, and three family residential construction. Ability to: - Recognize correct installation of building, plumbing and mechanical, electrical and roofing systems. Experience and Certification: - Certification by I.C.C. or other certifying organization in Combination - Dwelling Inspector and completion of an approved testing Program. - One year as a Building Inspector for another municipal or county government agency performing residential combination inspections. - Recognition by the Chief Building Official of the competency to perform residential combination inspections. -OR- - Completion of a formalized City training Program in residential combination inspections. Renewal of city certification required every three years. - Recognition by the Chief Building Official of the competency to perform residential combination inspections. Multi-Family Residential and Light Commercial Combination Inspection Knowledge of: - Methods, practices, codes, ordinances, policies, and materials used in construction work applied to multi-family and commercial buildings qualifying for inspection by Light Commercial Inspectors. Ability to: - Recognize correct installation of building, plumbing and mechanical, electrical and roofing systems as applied to multi- family and commercial buildings qualifying for inspection by Light Commercial Inspectors. Certification: - Certification by I.C.C. or other approved certifying organization in Commercial Combination Inspections, or Building Inspector, Mechanical Inspector, Plumbing Inspector, and Electrical Inspector. - Completion of an approved testing or formalized training program in Commercial Combination Inspections. - Recognition by the Chief Building Official of the competency to perform multi-family residential and light commercial inspections. Residential Combination & Structural Plan Review Knowledge of: - Standard construction drawings, plans, specifications, methods and materials applied to one, two, and three family residential structures. - Codes, ordinances, and policies that apply to Plumbing/Mechanical, electrical, and structural. - Methods and formulas for calculating various development fees. - Automated systems for tracking permits, calculating fees, and recording corrections, issuing permits, accepting plans, and performing technical plan review tasks. - State and City requirements to obtaining building permits. Ability to: - Read and interpret all levels of building construction and engineering plans, and specifications to determine code compliance related to one, two, and three family residential construction. - Calculate processing and impact fees. - Advise and assist customers on building permit requirements, and issue building permits using the City's automated permit system. - Use various computer software programs to research properties and buildings, enter permit and plan check information, calculate fees, and perform calculations. Certification: - Certification by I.C.C. or other recognized certifying organization in combination dwelling inspector and building inspector categories. - Completion of an approved testing or formalized training program in residential combination and structural plan review - Recognition by the Chief Building Official of the competency to perform all required duties. Non-Structural Building Plan Review Knowledge of: - Standard commercial drawings, plans, specifications, methods and materials as applied to multi-family and commercial structures. - Codes, ordinances, and policies that apply to non-structural, egress, and life safety. - Methods and formulas for calculating various development fees. - Automated systems for tracking permits, calculating fees, recording corrections, issuing permits, accepting plans, and performing technical plan review tasks. - State and City requirements relating to obtaining permits. Ability to: - Read and interpret all levels of building construction plans and specifications to determine code compliance related to multi-family and commercial structures. - Calculate processing and impact fees. - Advise customers of building permit requirements and issue building permits using the City's automated permit system. - Use various computer software programs to research properties and buildings, enter permit and plan check information, calculate fees, and perform calculations. Certification: - Certification by I.C.C. or other recognized certifying organization in Plans Examiner and building inspector categories - Completion of an approved testing or formalized training program in non-structural building plan review. - Recognition by the Chief Building Official of the competency to perform all required duties. Plumbing/Mechanical Plan Review Knowledge of: - Standard commercial drawings, plans, specifications, methods and materials as applied to multi-family and commercial structures. - Codes, ordinances, and policies that apply to Plumbing/Mechanical installations. - Methods and formulas for calculating various development fees. - Automated systems for tracking permits, calculating fees, recording corrections, issuing permits, accepting plans, and performing technical plan review tasks. - State and City requirements relating to obtaining permits. Ability to: - Read and interpret all levels of building construction plans and engineering plans and specifications to determine code compliance related to multi-family and commercial structures. - Calculate processing and impact fees. - Advise customers of building permit requirements and issue building permits using the City's automated permit system. - Use various computer software programs to research properties and buildings, enter permit and plan check information, calculate fees, and perform calculations. Certification: - Certification by I.C.C. or other recognized certifying organization in plumbing inspector and mechanical inspector categories. - Completion of an approved testing or formalized training program in plumbing/mechanical review. - Recognition by the Chief Building Official of the competency to perform all required duties. Electrical Plan Review Knowledge of: - Standard commercial drawings, plans, specifications, methods and materials as applied to multi-family and commercial structures. - Codes, ordinances, and policies that apply to electrical installations. - Methods and formulas for calculating various development fees. - Automated systems for tracking permits, calculating fees, recording corrections, issuing permits, accepting plans, and performing technical plan review tasks. - State and City requirements relating to obtaining permits. Ability to: - Read and interpret all levels of building construction plans and engineering plans and specifications to determine code compliance related to multi-family and commercial structures. - Calculate processing and impact fees. - Advise customers of building permit requirements and issue building permits using the City's automated permit system. - Use various computer software programs to research properties and buildings, enter permit and plan check information, calculate fees, and perform calculations. Certification: - Certification by I.C.C. or other recognized certifying organization in the electrical inspector category. - Completion of an approved testing or formalized training program in electrical plan review. - Recognition by the Chief Building Official of the competency to perform all required duties. Project Management (Public or Private Buildings) Knowledge of: - Contract management as it relates to construction and plan review contracts. - Software used for contract management purposes. - Non-code related materials and methods used in construction projects. - Permitting processes and systems utilized on complex construction projects. Ability to: - Read and understand construction contract provisions to effectively monitor contractor compliance. - Recognize correct installation of building, plumbing and mechanical, electrical and roofing systems as applied to City construction projects for both code and non-code related installations. - Manage and coordinate the more complex or difficult construction projects from conception to completion. - Work with applicants and staff from various areas to manage projects and resolve issues in relation to large and complex building projects. - Assist customers, identify problems and seek resolution. - Obtain recognition by the Public Works Department, or the Chief Building Official in project management competency. Certification: - Recognition by the Public Works Department, or the Chief Building Official in project management competency. Enforcement Case Management Knowledge of: - Search, seizure and other citation practices authorized under state and federal law. - Contract management principles as applied to demolition and repair contractors. - Provisions of the City and state codes relating to Housing and Dangerous Building activities. Ability to: - Obtain and maintain citation authority. - Enforce regulations with firmness and tact. - Perform data entry into the City Code System and use the computer to enter case notes, notices and other documents and reports. - Investigate complaints and inspect structures to determine if a Housing or Dangerous Building case needs to be initiated. - Work effectively with owners and contractors to identify deficiencies, issue building permits for corrective work or demolitions, and inspect work in progress. - Testify before City boards, and in a court of law in relation to cases, as required. - Work effectively with Police Officers and Code Enforcement Officers in enforcement of POP cases. - Manage the more difficult or complex investigations or enforcement actions. Certification: - Recognition by the Neighborhoods Department, or the Chief Building Official in Case Management. - PC 832 Certification, AACA Housing Enforcement Officer Certification. - Instruction in one or more of the following training programs: Regulatory Investigation Techniques, Community Oriented Policing or Pepper Spray. THE SELECTION PROCEDURE P lease note, the City of Sacramento's preferred method of communication with applicants is via e-mail. As such, please ensure you verify the e-mail address on your application, and check your e-mail frequently , including your spam and junk folders. All e-mail notifications can also be accessed through the governmentjobs.com applicant inbox. 1. Application: (Pass/Fail) - All applicants must complete and submit online a City of Sacramento employment application by the final filing deadline ; Employment applications must be submitted online; paper applications will not be accepted. Employment applications will be considered incomplete and will be disqualified: If applicants do not list current and/or past job-related experience in the duties area of the "Work Experience" section. Note: Qualifying experience is based on full-time experience (40 hours per week). Qualifying experience is calculated to the full-time equivalent (pro-rated if less than 40 hours/week ). If "see resume" is noted in the "Work Experience" section; a resume will not substitute for the information required in the "Work Experience" section. Proof of education such as, but not limited to, university/college transcripts and degrees should be submitted online with your application. Proof of education will be required at time of appointment. Proof of certification and/or license should be submitted online with your application. Proof of certification and/or license will be required at time of appointment. Position/job titles will not be considered in determining eligibility for meeting the minimum qualifications for this position. If you’re requesting Veteran’s credit, a copy of your DD214 must be submitted online with your application or emailed to the Employment Office by the final filing deadline . Information regarding the use of Veteran’s credit can be found in the Civil Service Board rules under rule 4.9C. Applicants are responsible for attaching a copy of their DD214 to each position for which they apply. 2. Training and Experience Exam : (Weighted 100%) - The questions located at the end of the application are the Training and Experience (T&E) Exam. Responses to the T&E questions will be rated and scored. This exam will evaluate the relevance, level, and progression of a candidate's education, training and experience. The exam score will determine your ranking on the eligible list for this job. When completing the T&E questions, please note: Responses to the T&E questions must be submitted online; paper questionnaires will not be accepted. A resume will not substitute for the information required in the T&E questions. 3. Eligibility : Candidates who pass the Training and Experience Test will be placed on the eligible list. The hiring department may contact candidates for interview at any time during the life of the one-year list. Candidate’s eligibility expires one year from the date of notification of a passing score for the Building Inspector I examination. 4. Screening Committee : (Pass/Fail)- All candidates that pass the examination and are in one of the top three ranks will have their application forwarded to the hiring department for review. The hiring department will select the most competitive applications for further consideration. Human Resources will only evaluate employment applications for the minimum qualifications, as stated on the job announcement, for applications selected by the hiring department. 5. Conditional Hire: Upon receipt of a conditional offer, the selected candidate must complete and pass Live Scan/fingerprinting. If applicable, candidates may also need to pass a pre-employment medical exam, controlled substance and/or alcohol test, and possess any required licensure or certification prior to receiving a start date from the Department. Failure to meet these prerequisites will be grounds for withdrawal of your conditional offer of employment. QUESTIONS: For questions concerning this job announcement and the application process: Please visit https://www.governmentjobs.com/Home/ApplicationGuide for a comprehensive, step-by-step guide to the application process. For technical support between 6 AM - 5 PM PT, contact Live Applicant Support at (855) 524-5627. Visit the City of Sacramento Human Resources Department website at https://www.cityofsacramento.gov/HR/employment ; Send an email to employment@cityofsacramento.org ; or Call the Human Resources Department at (916) 808-5726 Bilingual Pay Did you know that the City offers bilingual pay? That's right, most labor agreements offer the option of providing employees with bilingual pay if the department deems it to be operationally necessary. Pension Reform Act The City of Sacramento is covered by the California Public Employees' Retirement System, and as such, must adhere to the California Public Employee's Pension Reform Act (PEPRA) of 2013. Please note that the provisions within this act may affect or impact an applicant's eligibility and/or selection for open vacancies at the City of Sacramento. Equal Opportunity Employer The City of Sacramento is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. Additional Information Civil Service Rules: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/CivilServiceBoardRules62012.pdf Union Contracts: https://www.cityofsacramento.gov/HR/labor-agreements.html Salary Schedule: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/SalarySchedule.pdf Closing Date/Time: 5/14/2024 11:59 PM Pacific
THE POSITION With supervisor approval, incumbents may be eligible for intermittent remote work; however, they must physically reside within the Sacramento region or have the ability to regularly report to a City of Sacramento physical worksite with little notice. The City of Sacramento Community Development Department is seeking a Building Inspector to join the Building Division’s addressing team. This position works on assigning and managing street names and numerical addresses for parcels of land and buildings. Working with a dedicated team, the position will coordinate with multiple city departments and outside agencies on street and address information for new and existing buildings, lots, streets, and alleys. This position will perform research, process address requests, assign addresses, and assist citizens, businesses, and developers on address-related questions. IDEAL CANDIDATE STATEMENT The ideal candidate will possess excellent customer service and interpersonal abilities, keen attention to detail, and the ability to solve problems. The ideal candidate should have experience reading plans of various construction types and designated occupancy groups. The ideal candidate is able to work independently and use good judgement to make decisions on addresses. BUILDING INSPECTOR I/ BUILDING INSPECTOR II/ BUILDING INSPECTOR III DEFINITION To perform rule specific inspection activities in the review of plans and inspections of new building projects, alterations, and repairs, to enforce a variety of codes, ordinances, and established standards to achieve compliance, and to perform other duties and responsibilities as required. Depending on qualifications, incumbents may be assigned to any one, or any combination of inspection discipline areas as: Building Specialty Inspection Plumbing/Mechanical Specialty Inspection Electrical Specialty Inspection Roofing Combination Inspection Residential Combination Inspection Multi-Family Residential and Light Commercial Combination Inspection Residential Combination & Structural Plan Review Non-Structural Building Plan Review Plumbing/Mechanical Plan Review Electrical Plan Review Project Management Enforcement Case Management Building Specialty Inspection assignments concern inspections of residential and commercial construction and applicable methods, practices, materials, codes, ordinances and policies used in construction work as related to building construction. Plumbing/Mechanical Specialty Inspection assignments concern inspections of residential and commercial construction and applicable methods, practices, materials, codes, ordinances and policies used in construction work as related to plumbing and mechanical construction. Electrical Specialty Inspection assignments concern inspections of residential and commercial construction and applicable methods, practices, materials, codes, ordinances and policies used in construction work as related to electrical construction. Roofing Combination Inspection assignments concern inspections on roofing installations on one and two family residences, multi- family and commercial buildings, including building, plumbing, mechanical, and electrical inspections, incidental to the roofing work. Residential Combination Inspection assignments concern inspections on building, plumbing, mechanical, electrical, and roofing installations on one, two, and three family residences for conformance with applicable codes and ordinances. Multi-Family Residential and Light Commercial Combination Inspection assignments concern inspections on building, plumbing, mechanical, electrical, and roofing installations on specific types of building permits for multi-family and commercial buildings qualifying for inspections by Light Commercial Inspectors. Residential Combination & Structural Plan Review assignments concern the review of all building plans and supporting materials for one, two, and three family dwellings, and the acceptance and review of building permits to ensure compliance with various codes, ordinances, and policies; responsible for the preparation of correction notices defining plan deficiencies. Inspects all work, including the most complex installations to support fast track construction and assists with other inspections, including combination inspections. Non-Structural Building Plan Review assignments concern the review of the more complex building plans and supporting materials for commercial and multi-family buildings, and the acceptance and review of building permits to ensure compliance with various codes, ordinances and policies, responsible for the preparation of correction notices defining plan deficiencies; inspects all work, including the most complex installations to support fast track construction, and assists with other inspections disciplines as they relate to non-structural building plan review and construction. Plumbing/Mechanical Plan Review assignments concern the review of all building plans and supporting materials for plumbing and mechanical installations, and the acceptance and review of building permits to ensure compliance with various codes, ordinances and policies; responsible for the preparation of correction notices defining plan deficiencies; inspects all work, including the most complex installations to support fast track construction and assists with other inspection disciplines as they relate to plumbing and mechanical plan review installations. Electrical Plan Review assignments concern the review of all building plans and supporting materials for electrical installations, and the acceptance and review of building permits to ensure compliance with various codes, ordinances and policies; responsible for the preparation of correction notices defining plan deficiencies; inspects all work, including the most complex installations to support fast track construction, and assists with other inspection disciplines as they relate to electrical plan review and installations. Project Management assignments concern the development and administration of contracts for the construction or plan review of facilities, and the inspection of construction to ensure compliance with plans and specifications, and the management and coordination of City or private venture projects. Projects are managed and coordinated from conception through completion. In addition, Project Management assignments assist the project team by coordinating and expediting project approval, plan review, permit issuance, and inspections functions with various departments and agencies. Enforcement Case Management assignments concern complaint investigations for determination of code deficiencies, not necessarily related to active construction; management of contracts to demolish or repair structures with identified deficiencies, and coordination with various organizations and agencies in managing cases. DISTINGUISHING CHARACTERISTICS The Building Inspector class levels are distinguished by the number of inspection disciplines an inspector is recognized to be qualified in based on certification and demonstrable abilities. Positions in this class are flexibly staffed and are automatically flexed to the higher level upon completion of required experience and certification as established per the discipline being flexed to. Appointment to the higher class requires that the employee be performing the full range of duties for the class and meet the qualification standards for the class. Building Inspector I is the entry-level classification in the building inspection series requiring skill and knowledge in any one inspection discipline as illustrated. Incumbents may be assigned to perform the less difficult or complex work in other disciplines as required. Building Inspector II is distinguished from Building Inspector I, in that the former requires the performance of complex duties within two inspection disciplines as illustrated. Incumbents may be assigned to perform the less difficult or complex work in other disciplines as required. Building Inspector III is distinguished from Building Inspector I and II that it requires the incumbent to perform complex duties within three inspection disciplines as illustrated. Incumbents may be assigned to perform the less difficult or complex work in other disciplines as required. Building Inspector I, II, and III is distinguished from Building Inspector IV, by the latter requiring the incumbent to perform complex duties within four inspection disciplines. SUPERVISION RECEIVED AND EXCERCISED Direct and lead supervision is provided by a Supervising Building Inspector or higher-level management personnel. ESSENTIAL DUTIES AND RESPONSIBILITIES - Identify and enforce a variety of codes, ordinances, and standards violations for conformance with plans and specifications. - Inspect workmanship and materials in building construction projects for conformance with plans and specifications, and inspect potentially substandard or dangerous buildings. - Work with diagrams, specifications, plans, and similar documents. - Read and interpret building construction and engineering plan specifications and codes. - Prepare and maintain reports. - Confer with, and assist architects, engineers, contractors, builders, homeowners, tenants and the general public in the field and office; explain and interpret requirements and restrictions, keep records and prepare reports as necessary. - Enter information into the Automated Permit System and the computer for word processing, calendaring, and electronic mail. - Perform basic plan review, routing and project management activities, issue permits, and fee calculations. - Identify illegal construction activity and issues violation notices. - May perform case or project management activities. - Other duties may be performed, not all duties may be performed by each individual holding this classification. QUALIFICATIONS Knowledge of: - Methods, practices, and materials used in construction work relating to a particular inspection discipline. - Proper inspection techniques to examine workmanship and materials. - Data entry and information retrieval from various computer systems necessary for duties. - Safety rules, regulations and practices applied to construction areas and office spaces. - Codes, ordinances, and policies applicable to a particular inspection discipline(s). Ability to: - Read and write the English language at a level of proficiency necessary for effective job performance. - Apply technical knowledge and follow proper inspection techniques to examine workmanship and materials. - Recognize correct installations of building systems; detect defects and faults in construction workmanship and materials. - Detect deviations from plans, regulations, and read and interpret building construction and engineering plans, specifications, and codes. - Understand diagrams, specifications, plans, and similar documents at a level necessary for efficient job performance. - Establish and maintain effective working relationships with staff, engineers, architects, contractors, tenants, owners, and the general public. - Operate a motor vehicle. - Operate a personal computer and other electronic equipment, including field entry devices and cellular phone. - Lift, carry, push, tools, equipment, supplies and plans weighing up to 50 pounds. - Work within confined spaces, climb ladders, work around power and noise producing equipment, work in confined spaces requiring reaching, twisting, turning, kneeling, bending, stooping, squatting, and crouching. - Work in all weather conditions including wet, hot, cold and windy. - Access construction areas within construction sites. Ability to: - Work on uneven work surfaces, trenches, slopes, roof structures, framing, and other conditions found in a construction environment. - Serve on-call, work after hours, weekends and holidays, during emergency situations, and as required. - Anticipate issues and seek resolution through various resources. - Provide service to all customers with a professional and sincere attitude; be customer service oriented. EDUCATION AND EXPERIENCE: Any combination equivalent to experience and education that could likely provide the required knowledge and abilities would be qualifying. A typical way to obtain the knowledge and abilities would be: EDUCATION: Equivalent to the completion of the 12th grade. -AND_ EXPERIENCE: One year of experience performing building inspection work within one or more inspection disciplines for a municipal or county government agency, or three years of journey level experience in the building construction field as a plumber, electrician, carpenter, roofer, or closely related field, within the discipline(s) applied. -OR- EDUCATION: Completion of 21 units of college level courses in building inspection, construction, or other related areas and possession of a certification issued by the I.C.C. or other approved certifying organization in the building construction or plans examiner fields -AND- EXPERIENCE: One year of experience performing a variety of paraprofessional/technical work related to plan checking and inspections. PROOF OF EDUCATION Should education be used to qualify for this position, then proof of education such as, but not limited to, university/college transcripts and degrees should be submitted with your application and will be required at the time of appointment . Unofficial documents and/or copies are acceptable. An applicant with a college degree obtained outside the United States must have education records evaluated by a credentials evaluation service. Evaluation of education records will be due at time of appointment. PROOF OF CERTIFICATION Should certification and/or license be used to qualify for this position, then proof of said certification and /or license should be submitted with your application and will be required at the time of appointment . SPECIAL QUALIFICATIONS DRIVER LICENSE: Possession of a valid California Class C Driver License is required at the time of appointment. Individuals who do not meet this requirement due to a physical disability will be considered for accommodation on a case by case basis. CERTIFICATION: Incumbents must possess certification from an approved certifying organization in their specific work discipline(s) and obtain recognition of competency within one year of appointment. Maintenance of required certifications is a condition for continued employment in this classification. PROBATIONARY PERIOD Employees must complete twelve (12) months of probation at a satisfactory performance level prior to gaining permanent status. In addition, incumbents in each inspection discipline must have the following knowledge, abilities, and experience and/or certification as outlined per discipline. Once appointed, inspectors may qualify and perform work in other disciplines. Building Specialty Inspection, Plumbing/Mechanical Specialty Inspection, or Electrical Specialty Inspection Knowledge of: - Methods, practices, codes, ordinances, policies, and materials used in construction work as it relates to the specialty area, and applies to both residential and commercial construction. Ability to: - Inspect all work, including the more complex or difficult installations within the specialty. Experience and Certification: - Three years of experience as a journey-level craft person in the specialty area, or a closely related discipline, and a working knowledge of building construction. - Certification by I.C.C. or other approved certifying organization in the appropriate specialty categories. - Recognition by the Chief Building Official of the competency to perform both residential and commercial building inspections. Roofing Combination Inspection Knowledge of: - Methods, practices, and materials used in roofing as applied to both residential and commercial construction. - Codes, ordinances and policies that are applied to roofing and all other disciplines that are incidental to roofing work. Ability to: - Recognize correct installation of roofing systems. - Inspect all work, including the more complex and difficult roofing systems. Experience and Certification: - Three years of experience as a journey-level crafts person in the roofing discipline, or a closely related discipline, and working knowledge of roofing construction, including all incidental disciplines associated with roofs. - Certification by I.C.C. or other approved certifying organization as a Building Inspector. - Completion of an approved testing or training program in combination roofing inspection. - Recognition by the Chief Building Official of the competency to perform both residential and commercial inspections within the specialty. Residential Combination Inspection Knowledge of: - Methods, practices, codes, ordinances, policies, and materials used in construction work applied to one, two, and three family residential construction. Ability to: - Recognize correct installation of building, plumbing and mechanical, electrical and roofing systems. Experience and Certification: - Certification by I.C.C. or other certifying organization in Combination - Dwelling Inspector and completion of an approved testing Program. - One year as a Building Inspector for another municipal or county government agency performing residential combination inspections. - Recognition by the Chief Building Official of the competency to perform residential combination inspections. -OR- - Completion of a formalized City training Program in residential combination inspections. Renewal of city certification required every three years. - Recognition by the Chief Building Official of the competency to perform residential combination inspections. Multi-Family Residential and Light Commercial Combination Inspection Knowledge of: - Methods, practices, codes, ordinances, policies, and materials used in construction work applied to multi-family and commercial buildings qualifying for inspection by Light Commercial Inspectors. Ability to: - Recognize correct installation of building, plumbing and mechanical, electrical and roofing systems as applied to multi- family and commercial buildings qualifying for inspection by Light Commercial Inspectors. Certification: - Certification by I.C.C. or other approved certifying organization in Commercial Combination Inspections, or Building Inspector, Mechanical Inspector, Plumbing Inspector, and Electrical Inspector. - Completion of an approved testing or formalized training program in Commercial Combination Inspections. - Recognition by the Chief Building Official of the competency to perform multi-family residential and light commercial inspections. Residential Combination & Structural Plan Review Knowledge of: - Standard construction drawings, plans, specifications, methods and materials applied to one, two, and three family residential structures. - Codes, ordinances, and policies that apply to Plumbing/Mechanical, electrical, and structural. - Methods and formulas for calculating various development fees. - Automated systems for tracking permits, calculating fees, and recording corrections, issuing permits, accepting plans, and performing technical plan review tasks. - State and City requirements to obtaining building permits. Ability to: - Read and interpret all levels of building construction and engineering plans, and specifications to determine code compliance related to one, two, and three family residential construction. - Calculate processing and impact fees. - Advise and assist customers on building permit requirements, and issue building permits using the City's automated permit system. - Use various computer software programs to research properties and buildings, enter permit and plan check information, calculate fees, and perform calculations. Certification: - Certification by I.C.C. or other recognized certifying organization in combination dwelling inspector and building inspector categories. - Completion of an approved testing or formalized training program in residential combination and structural plan review - Recognition by the Chief Building Official of the competency to perform all required duties. Non-Structural Building Plan Review Knowledge of: - Standard commercial drawings, plans, specifications, methods and materials as applied to multi-family and commercial structures. - Codes, ordinances, and policies that apply to non-structural, egress, and life safety. - Methods and formulas for calculating various development fees. - Automated systems for tracking permits, calculating fees, recording corrections, issuing permits, accepting plans, and performing technical plan review tasks. - State and City requirements relating to obtaining permits. Ability to: - Read and interpret all levels of building construction plans and specifications to determine code compliance related to multi-family and commercial structures. - Calculate processing and impact fees. - Advise customers of building permit requirements and issue building permits using the City's automated permit system. - Use various computer software programs to research properties and buildings, enter permit and plan check information, calculate fees, and perform calculations. Certification: - Certification by I.C.C. or other recognized certifying organization in Plans Examiner and building inspector categories - Completion of an approved testing or formalized training program in non-structural building plan review. - Recognition by the Chief Building Official of the competency to perform all required duties. Plumbing/Mechanical Plan Review Knowledge of: - Standard commercial drawings, plans, specifications, methods and materials as applied to multi-family and commercial structures. - Codes, ordinances, and policies that apply to Plumbing/Mechanical installations. - Methods and formulas for calculating various development fees. - Automated systems for tracking permits, calculating fees, recording corrections, issuing permits, accepting plans, and performing technical plan review tasks. - State and City requirements relating to obtaining permits. Ability to: - Read and interpret all levels of building construction plans and engineering plans and specifications to determine code compliance related to multi-family and commercial structures. - Calculate processing and impact fees. - Advise customers of building permit requirements and issue building permits using the City's automated permit system. - Use various computer software programs to research properties and buildings, enter permit and plan check information, calculate fees, and perform calculations. Certification: - Certification by I.C.C. or other recognized certifying organization in plumbing inspector and mechanical inspector categories. - Completion of an approved testing or formalized training program in plumbing/mechanical review. - Recognition by the Chief Building Official of the competency to perform all required duties. Electrical Plan Review Knowledge of: - Standard commercial drawings, plans, specifications, methods and materials as applied to multi-family and commercial structures. - Codes, ordinances, and policies that apply to electrical installations. - Methods and formulas for calculating various development fees. - Automated systems for tracking permits, calculating fees, recording corrections, issuing permits, accepting plans, and performing technical plan review tasks. - State and City requirements relating to obtaining permits. Ability to: - Read and interpret all levels of building construction plans and engineering plans and specifications to determine code compliance related to multi-family and commercial structures. - Calculate processing and impact fees. - Advise customers of building permit requirements and issue building permits using the City's automated permit system. - Use various computer software programs to research properties and buildings, enter permit and plan check information, calculate fees, and perform calculations. Certification: - Certification by I.C.C. or other recognized certifying organization in the electrical inspector category. - Completion of an approved testing or formalized training program in electrical plan review. - Recognition by the Chief Building Official of the competency to perform all required duties. Project Management (Public or Private Buildings) Knowledge of: - Contract management as it relates to construction and plan review contracts. - Software used for contract management purposes. - Non-code related materials and methods used in construction projects. - Permitting processes and systems utilized on complex construction projects. Ability to: - Read and understand construction contract provisions to effectively monitor contractor compliance. - Recognize correct installation of building, plumbing and mechanical, electrical and roofing systems as applied to City construction projects for both code and non-code related installations. - Manage and coordinate the more complex or difficult construction projects from conception to completion. - Work with applicants and staff from various areas to manage projects and resolve issues in relation to large and complex building projects. - Assist customers, identify problems and seek resolution. - Obtain recognition by the Public Works Department, or the Chief Building Official in project management competency. Certification: - Recognition by the Public Works Department, or the Chief Building Official in project management competency. Enforcement Case Management Knowledge of: - Search, seizure and other citation practices authorized under state and federal law. - Contract management principles as applied to demolition and repair contractors. - Provisions of the City and state codes relating to Housing and Dangerous Building activities. Ability to: - Obtain and maintain citation authority. - Enforce regulations with firmness and tact. - Perform data entry into the City Code System and use the computer to enter case notes, notices and other documents and reports. - Investigate complaints and inspect structures to determine if a Housing or Dangerous Building case needs to be initiated. - Work effectively with owners and contractors to identify deficiencies, issue building permits for corrective work or demolitions, and inspect work in progress. - Testify before City boards, and in a court of law in relation to cases, as required. - Work effectively with Police Officers and Code Enforcement Officers in enforcement of POP cases. - Manage the more difficult or complex investigations or enforcement actions. Certification: - Recognition by the Neighborhoods Department, or the Chief Building Official in Case Management. - PC 832 Certification, AACA Housing Enforcement Officer Certification. - Instruction in one or more of the following training programs: Regulatory Investigation Techniques, Community Oriented Policing or Pepper Spray. THE SELECTION PROCEDURE P lease note, the City of Sacramento's preferred method of communication with applicants is via e-mail. As such, please ensure you verify the e-mail address on your application, and check your e-mail frequently , including your spam and junk folders. All e-mail notifications can also be accessed through the governmentjobs.com applicant inbox. 1. Application: (Pass/Fail) - All applicants must complete and submit online a City of Sacramento employment application by the final filing deadline ; Employment applications must be submitted online; paper applications will not be accepted. Employment applications will be considered incomplete and will be disqualified: If applicants do not list current and/or past job-related experience in the duties area of the "Work Experience" section. Note: Qualifying experience is based on full-time experience (40 hours per week). Qualifying experience is calculated to the full-time equivalent (pro-rated if less than 40 hours/week ). If "see resume" is noted in the "Work Experience" section; a resume will not substitute for the information required in the "Work Experience" section. Proof of education such as, but not limited to, university/college transcripts and degrees should be submitted online with your application. Proof of education will be required at time of appointment. Proof of certification and/or license should be submitted online with your application. Proof of certification and/or license will be required at time of appointment. Position/job titles will not be considered in determining eligibility for meeting the minimum qualifications for this position. If you’re requesting Veteran’s credit, a copy of your DD214 must be submitted online with your application or emailed to the Employment Office by the final filing deadline . Information regarding the use of Veteran’s credit can be found in the Civil Service Board rules under rule 4.9C. Applicants are responsible for attaching a copy of their DD214 to each position for which they apply. 2. Training and Experience Exam : (Weighted 100%) - The questions located at the end of the application are the Training and Experience (T&E) Exam. Responses to the T&E questions will be rated and scored. This exam will evaluate the relevance, level, and progression of a candidate's education, training and experience. The exam score will determine your ranking on the eligible list for this job. When completing the T&E questions, please note: Responses to the T&E questions must be submitted online; paper questionnaires will not be accepted. A resume will not substitute for the information required in the T&E questions. 3. Eligibility : Candidates who pass the Training and Experience Test will be placed on the eligible list. The hiring department may contact candidates for interview at any time during the life of the one-year list. Candidate’s eligibility expires one year from the date of notification of a passing score for the Building Inspector I examination. 4. Screening Committee : (Pass/Fail)- All candidates that pass the examination and are in one of the top three ranks will have their application forwarded to the hiring department for review. The hiring department will select the most competitive applications for further consideration. Human Resources will only evaluate employment applications for the minimum qualifications, as stated on the job announcement, for applications selected by the hiring department. 5. Conditional Hire: Upon receipt of a conditional offer, the selected candidate must complete and pass Live Scan/fingerprinting. If applicable, candidates may also need to pass a pre-employment medical exam, controlled substance and/or alcohol test, and possess any required licensure or certification prior to receiving a start date from the Department. Failure to meet these prerequisites will be grounds for withdrawal of your conditional offer of employment. QUESTIONS: For questions concerning this job announcement and the application process: Please visit https://www.governmentjobs.com/Home/ApplicationGuide for a comprehensive, step-by-step guide to the application process. For technical support between 6 AM - 5 PM PT, contact Live Applicant Support at (855) 524-5627. Visit the City of Sacramento Human Resources Department website at https://www.cityofsacramento.gov/HR/employment ; Send an email to employment@cityofsacramento.org ; or Call the Human Resources Department at (916) 808-5726 Bilingual Pay Did you know that the City offers bilingual pay? That's right, most labor agreements offer the option of providing employees with bilingual pay if the department deems it to be operationally necessary. Pension Reform Act The City of Sacramento is covered by the California Public Employees' Retirement System, and as such, must adhere to the California Public Employee's Pension Reform Act (PEPRA) of 2013. Please note that the provisions within this act may affect or impact an applicant's eligibility and/or selection for open vacancies at the City of Sacramento. Equal Opportunity Employer The City of Sacramento is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. Additional Information Civil Service Rules: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/CivilServiceBoardRules62012.pdf Union Contracts: https://www.cityofsacramento.gov/HR/labor-agreements.html Salary Schedule: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/SalarySchedule.pdf Closing Date/Time: 5/14/2024 11:59 PM Pacific
City of Fremont, CA
Fremont, California, United States
Description The City of Fremont's Community Development Department is recruiting for Building Inspector Specialist (Mechanical) VIEW OUR RECRUITMENT BROCHURE The Department The role of the Community Development Department is to help Fremont become the sustainable, strategically urban community envisioned in the City's General Plan . Department activities include: Providing professional assistance to developers, contractors, businesses, and homeowners Preserving open space Planning for and assisting with the building of high-quality strategically urban residential and commercial developments Maintaining and increasing the range of housing alternatives for the community The department includes Planning , Building and Safety , Code Enforcement , Housing , and Sustainability . First Review of Applications The first review of applications is May 17, 2024, at 12:00 p.m. (PT). This recruitment may close without notice after this date so interested applicants are encouraged to apply immediately. A resume and supplemental questionnaire (part of the online application) must be submitted with the completed City application. To be considered for this outstanding employment opportunity, please complete an application online by clicking "Apply" just above this box. Selection Process The process may include individual and/or panel interviews, professional reference checks, fingerprint check for criminal history and other related components. Only those candidates who have the best combination of qualifications in relation to the requirements and duties of the position will continue in the selection process. Meeting the minimum qualifications does not guarantee an invitation to participate in the process. Reasonable Accommodation Human Resources will make reasonable efforts in the examination process to accommodate persons with disabilities. Please advise Human Resources of any special needs a minimum of 5 days in advance of the selection process by calling (510) 494-4660 or emailing humanresources@fremont.gov . Contact Us For additional information, please contact Human Resources Department at: humanresources@fremont.gov . The information contained herein is subject to change and does not constitute either an expressed or implied contract. _______________________________________________________________________________ Building Inspector Specialist Class Specification Definition Under direction, enforces the provisions of the Building, Plumbing, Mechanical, Fire, Green and Electrical Codes by inspecting both new projects and additions and alterations to existing residential, commercial and industrial buildings; provides technical expertise and training in an assigned functional area; may be assigned to coordinate counter or development activities; and performs related duties as required. Class Characteristics This is the advanced level classification in the Building Inspection series. Positions in this classification are characterized by their responsibility to provide advanced technical expertise in one or more assigned areas. Incumbents may be rotated to either field or office work. Employees are responsible for handling routine work problems; review of work is periodic or on a problem basis with the employee presenting alternative courses of action. It is distinguished from the next lower classification of Building Inspector II by the requirement to hold a minimum of three specialty certificates (two of which shall be commercial specialty certificates, including but not limited to ICC, NICET, or OSFM Fire Inspector) and complete a minimum of 2 years as a Fremont Building Inspector II (equivalent external experience may be considered at the discretion of the Fremont Building Official). Essential Functions Performs inspections, plan checks, and related duties in a specialized field of building inspection such as structural, mechanical, plumbing, electrical, fire, accessibility, or green trades. Investigates unlisted equipment and suspect substandard installations to determine product equivalency. Resolves disputes over interpretation and application of building codes. Reviews building plans to determine compliance to specialized systems and methods and schedules of inspection. Meets with City officials, business representatives and the general public to discuss specialized facets of inspection, including procedures and problems. Represents the City at meetings and conferences. Reviews and approves building permits. Trains staff in assigned building inspection specialty. Performs combination building inspection duties. Prepares correspondence and reports. Maintains building inspection records. Utilizes computer for tracking projects, writing and generating reports. Marginal Functions Other duties as assigned. Minimum Qualifications Knowledge, Skills and Abilities Knowledge of: California Building, Fire, Plumbing, Green, Energy, Mechanical and Electrical Codes and their application in all buildings and structures; the characteristics, qualities and properties of related materials and construction methods; investigative techniques and procedures as related to building inspection; plan reading; and mathematics through algebra and trigonometry; dispute resolution techniques; written and oral communication methods; record keeping and office practices and procedures. Skill in: Reading, explaining, and interpreting building plans, specifications and codes; exercising sound and independent judgment in complex situations; dealing tactfully and effectively with a diverse population in reaching mutually beneficial design and construction solutions; communicating ideas clearly and concisely both orally and in writing; maintaining accurate records and preparing clear and concise reports, correspondence, and other written materials using a computer or mobile device. Ability to: Conduct building inspections; apply the provisions of the California Building, Plumbing, Electrical, Mechanical, Fire, and other applicable codes to residential, commercial and industrial buildings in the field and in the office; check plans; read and understand plans and specifications; perform complex calculations up to and including algebra and trigonometry; communicate effectively with others both orally and in writing; develop and maintain effective work relationships with individuals from a variety of ethnic and socio-economic backgrounds in other governmental agencies, City employees, business and industrial establishments and the general public; and train and review the work of departmental personnel. Incumbents must possess the physical and mental capacity to work under the conditions described in this document and to perform the duties required by their assigned position. Education/Experience Any combination of education and experience, which has provided the knowledge, skills and abilities necessary to satisfactorily perform the job would be qualifying. A typical way to obtain the required knowledge, skills and abilities would be: Graduation from high school and two (2) years of experience in building inspection work including one year in a specialized field of inspection or equivalent specialized training or experience. In addition, incumbents must hold the Building Inspector II position in Fremont for a minimum of 2 years (equivalent external experience may be considered at the discretion of the Fremont Building Official.) Licenses/Certificates/Special Requirements Positions in this classification require possession of, or ability to obtain by time of appointment and maintain during appointment, a valid Class C California Driver License. In addition, incumbents must possess and maintain valid ICC Certification (or equivalent certification(s)) as a Residential Building Inspector and a Commercial Building Inspector and three specialty certificates (residential or commercial mechanical, electrical, plumbing) with minimum two commercial specialty certificates. Specialists must also have both Residential and Commercial trade certifications in the same speciality. ICC Fire Inspector II NICET, or OSFM Fire Inspector may substitute as one commercial specialty certificate. Certification as a CASp (Certified Access Specialist program) is highly desirable. Failure to maintain state-mandated certifications will result in termination. (Health and Safety Code, Sections 18949.25 through 18949.31). Physical and Environmental Demands Rare = 66% Sitting: Frequent Walking: Occasional Standing: Occasional Bending (neck): Rare Bending (waist): Rare Squatting: Rare Climbing: Rare Kneeling: Rare Crawling: Rare Jumping: Rare Balancing: Rare Twisting (neck): Rare Twisting (waist): Rare Grasp - light (dominant hand): Occasional Grasp - light (non-dominant): Occasional Grasp - firm (dominant hand): Rare Grasp - firm (non-dominant): Rare Fine manipulation (dominant): Occasional Fine manipulation (non-dominant): Occasional Reach - at/below shoulder: Rare Reach - above shoulder level: Rare Push/pull: Up to 10 lbs. Rare 11 to 25 lbs. Rare 26 to 50 lbs. Rare 51 to 75 lbs. Never 76 to 100 lbs. Never Over 100 lbs. Never Lifting: Up to 10 lbs. Rare 11 to 25 lbs. Rare 26 to 50 lbs. Rare 51 to 75 lbs. Never 76 to 100 lbs. Never Over 100 lbs. Never Carrying: Up to 10 lbs. Frequent 11 to 25 lbs. Rare 26 to 50 lbs. Rare 51 to 75 lbs. Never 76 to 100 lbs. Never Over 100 lbs. Never Coordination: Eye-hand: Required Eye-hand-foot: Required Driving: Required Vision: Acuity, near: Required Acuity, far: Not required Depth perception: Required Accommodation: Required Color vision: Required Field of vision: Required Talking: Face-to-face contact: Required Verbal contact w/others: Required Public: Required Hearing: Normal conversation: Required Telephone communication: Required Earplugs required: Not required Work environment: Works indoors, works outdoors, exposure to extreme hot or cold temperature, exposure to marked changes in temperature / humidity, exposure to dust, fumes, smoke, gases, odors, mists, or other irritating particles, exposure to slippery or uneven walking surfaces, using computer monitor, exposure to vibration, works around others, works alone, works with others. Class Code: 5650 FLSA: Non-exempt EEOC Code: 3 Barg. Unit: CFEA Probation: 12 months Rev.: 7/16 The City of Fremont offers a comprehensive benefit package including general and holiday leave as well as medical, dental, vision, life, and long/short-term disability insurance. To view a summary of the benefits the City offers, please visit: City of Fremont Benefits Summary
Description The City of Fremont's Community Development Department is recruiting for Building Inspector Specialist (Mechanical) VIEW OUR RECRUITMENT BROCHURE The Department The role of the Community Development Department is to help Fremont become the sustainable, strategically urban community envisioned in the City's General Plan . Department activities include: Providing professional assistance to developers, contractors, businesses, and homeowners Preserving open space Planning for and assisting with the building of high-quality strategically urban residential and commercial developments Maintaining and increasing the range of housing alternatives for the community The department includes Planning , Building and Safety , Code Enforcement , Housing , and Sustainability . First Review of Applications The first review of applications is May 17, 2024, at 12:00 p.m. (PT). This recruitment may close without notice after this date so interested applicants are encouraged to apply immediately. A resume and supplemental questionnaire (part of the online application) must be submitted with the completed City application. To be considered for this outstanding employment opportunity, please complete an application online by clicking "Apply" just above this box. Selection Process The process may include individual and/or panel interviews, professional reference checks, fingerprint check for criminal history and other related components. Only those candidates who have the best combination of qualifications in relation to the requirements and duties of the position will continue in the selection process. Meeting the minimum qualifications does not guarantee an invitation to participate in the process. Reasonable Accommodation Human Resources will make reasonable efforts in the examination process to accommodate persons with disabilities. Please advise Human Resources of any special needs a minimum of 5 days in advance of the selection process by calling (510) 494-4660 or emailing humanresources@fremont.gov . Contact Us For additional information, please contact Human Resources Department at: humanresources@fremont.gov . The information contained herein is subject to change and does not constitute either an expressed or implied contract. _______________________________________________________________________________ Building Inspector Specialist Class Specification Definition Under direction, enforces the provisions of the Building, Plumbing, Mechanical, Fire, Green and Electrical Codes by inspecting both new projects and additions and alterations to existing residential, commercial and industrial buildings; provides technical expertise and training in an assigned functional area; may be assigned to coordinate counter or development activities; and performs related duties as required. Class Characteristics This is the advanced level classification in the Building Inspection series. Positions in this classification are characterized by their responsibility to provide advanced technical expertise in one or more assigned areas. Incumbents may be rotated to either field or office work. Employees are responsible for handling routine work problems; review of work is periodic or on a problem basis with the employee presenting alternative courses of action. It is distinguished from the next lower classification of Building Inspector II by the requirement to hold a minimum of three specialty certificates (two of which shall be commercial specialty certificates, including but not limited to ICC, NICET, or OSFM Fire Inspector) and complete a minimum of 2 years as a Fremont Building Inspector II (equivalent external experience may be considered at the discretion of the Fremont Building Official). Essential Functions Performs inspections, plan checks, and related duties in a specialized field of building inspection such as structural, mechanical, plumbing, electrical, fire, accessibility, or green trades. Investigates unlisted equipment and suspect substandard installations to determine product equivalency. Resolves disputes over interpretation and application of building codes. Reviews building plans to determine compliance to specialized systems and methods and schedules of inspection. Meets with City officials, business representatives and the general public to discuss specialized facets of inspection, including procedures and problems. Represents the City at meetings and conferences. Reviews and approves building permits. Trains staff in assigned building inspection specialty. Performs combination building inspection duties. Prepares correspondence and reports. Maintains building inspection records. Utilizes computer for tracking projects, writing and generating reports. Marginal Functions Other duties as assigned. Minimum Qualifications Knowledge, Skills and Abilities Knowledge of: California Building, Fire, Plumbing, Green, Energy, Mechanical and Electrical Codes and their application in all buildings and structures; the characteristics, qualities and properties of related materials and construction methods; investigative techniques and procedures as related to building inspection; plan reading; and mathematics through algebra and trigonometry; dispute resolution techniques; written and oral communication methods; record keeping and office practices and procedures. Skill in: Reading, explaining, and interpreting building plans, specifications and codes; exercising sound and independent judgment in complex situations; dealing tactfully and effectively with a diverse population in reaching mutually beneficial design and construction solutions; communicating ideas clearly and concisely both orally and in writing; maintaining accurate records and preparing clear and concise reports, correspondence, and other written materials using a computer or mobile device. Ability to: Conduct building inspections; apply the provisions of the California Building, Plumbing, Electrical, Mechanical, Fire, and other applicable codes to residential, commercial and industrial buildings in the field and in the office; check plans; read and understand plans and specifications; perform complex calculations up to and including algebra and trigonometry; communicate effectively with others both orally and in writing; develop and maintain effective work relationships with individuals from a variety of ethnic and socio-economic backgrounds in other governmental agencies, City employees, business and industrial establishments and the general public; and train and review the work of departmental personnel. Incumbents must possess the physical and mental capacity to work under the conditions described in this document and to perform the duties required by their assigned position. Education/Experience Any combination of education and experience, which has provided the knowledge, skills and abilities necessary to satisfactorily perform the job would be qualifying. A typical way to obtain the required knowledge, skills and abilities would be: Graduation from high school and two (2) years of experience in building inspection work including one year in a specialized field of inspection or equivalent specialized training or experience. In addition, incumbents must hold the Building Inspector II position in Fremont for a minimum of 2 years (equivalent external experience may be considered at the discretion of the Fremont Building Official.) Licenses/Certificates/Special Requirements Positions in this classification require possession of, or ability to obtain by time of appointment and maintain during appointment, a valid Class C California Driver License. In addition, incumbents must possess and maintain valid ICC Certification (or equivalent certification(s)) as a Residential Building Inspector and a Commercial Building Inspector and three specialty certificates (residential or commercial mechanical, electrical, plumbing) with minimum two commercial specialty certificates. Specialists must also have both Residential and Commercial trade certifications in the same speciality. ICC Fire Inspector II NICET, or OSFM Fire Inspector may substitute as one commercial specialty certificate. Certification as a CASp (Certified Access Specialist program) is highly desirable. Failure to maintain state-mandated certifications will result in termination. (Health and Safety Code, Sections 18949.25 through 18949.31). Physical and Environmental Demands Rare = 66% Sitting: Frequent Walking: Occasional Standing: Occasional Bending (neck): Rare Bending (waist): Rare Squatting: Rare Climbing: Rare Kneeling: Rare Crawling: Rare Jumping: Rare Balancing: Rare Twisting (neck): Rare Twisting (waist): Rare Grasp - light (dominant hand): Occasional Grasp - light (non-dominant): Occasional Grasp - firm (dominant hand): Rare Grasp - firm (non-dominant): Rare Fine manipulation (dominant): Occasional Fine manipulation (non-dominant): Occasional Reach - at/below shoulder: Rare Reach - above shoulder level: Rare Push/pull: Up to 10 lbs. Rare 11 to 25 lbs. Rare 26 to 50 lbs. Rare 51 to 75 lbs. Never 76 to 100 lbs. Never Over 100 lbs. Never Lifting: Up to 10 lbs. Rare 11 to 25 lbs. Rare 26 to 50 lbs. Rare 51 to 75 lbs. Never 76 to 100 lbs. Never Over 100 lbs. Never Carrying: Up to 10 lbs. Frequent 11 to 25 lbs. Rare 26 to 50 lbs. Rare 51 to 75 lbs. Never 76 to 100 lbs. Never Over 100 lbs. Never Coordination: Eye-hand: Required Eye-hand-foot: Required Driving: Required Vision: Acuity, near: Required Acuity, far: Not required Depth perception: Required Accommodation: Required Color vision: Required Field of vision: Required Talking: Face-to-face contact: Required Verbal contact w/others: Required Public: Required Hearing: Normal conversation: Required Telephone communication: Required Earplugs required: Not required Work environment: Works indoors, works outdoors, exposure to extreme hot or cold temperature, exposure to marked changes in temperature / humidity, exposure to dust, fumes, smoke, gases, odors, mists, or other irritating particles, exposure to slippery or uneven walking surfaces, using computer monitor, exposure to vibration, works around others, works alone, works with others. Class Code: 5650 FLSA: Non-exempt EEOC Code: 3 Barg. Unit: CFEA Probation: 12 months Rev.: 7/16 The City of Fremont offers a comprehensive benefit package including general and holiday leave as well as medical, dental, vision, life, and long/short-term disability insurance. To view a summary of the benefits the City offers, please visit: City of Fremont Benefits Summary
City of LIvermore
Livermore, California, United States
Description Click here for the job announcement ! The Water Resources Division provides a dynamic and supportive work environment providing critical services to the community. Come join the team at the Water Reclamation Plant - 101 West Jack London Boulevard in Livermore! There are three (3) Water Resources Instrument Control Technician vacancies to be filled. DEFINITION Under general supervision, the Water Resources Instrument Control Technician installs, operates, maintains, calibrates, and repairs computer hardware, process instrumentation, data logging, and telemetry; de-bugs, modifies, and customizes software; modifies, maintains, and repairs all components of a programmable logic controller (PLC) based supervisory control and data acquisition (SCADA) systems/distributed control systems; and performs other duties as assigned. DISTINGUISHING CHARACTERISTICS This classification is distinguished by the specialized, technical assignments in support of SCADA systems, PLC's, distributed control systems, computer networking systems, software and instrumentation, telemetry, lab analytical equipment, safety systems, and other related systems. Incumbents will be expected to work independently in modifying, maintaining, and operating the above referenced systems. SUPERVISION RECEIVED General supervision is provided by a Public Works Supervisor and the WR Coordinator - Electrical & Instrumentation Control. SUPERVISION EXERCISED None. Examples of Important and Essential Functions Technical Functions Installs, calibrates, programs, maintains, and repairs instruments, PLC based system/distributed control system components, meters, analyzers, recorders, control and feed systems, computers, monitors, printers, transducers, microprocessors, and data transmission systems; repairs electronics, electrical, pneumatic, mechanical, and hydraulic systems; maintains and repairs laboratory and safety equipment including gas detection, alarm systems, pH and DO meters; analyzes software problems; modifies computer programs to optimize plant operations and operator convenience; analyzes problems and repairs equipment to component level; analyzes problems and repairs 480 volt alternating current (AC) motor control centers; installs and configures security systems including access control and video system; performs service and maintenance work on a variety of electrical installations, systems, pumps, meters, and other equipment in City facilities; operates diagnostic instruments such as a voltmeter, megger, ammeter, ohmmeter, transistor checker, loop meter, and other electrical test equipment installs and repairs; replaces outlets, lighting fixtures, switches, ballasts, conduit runs and distribution panels; assists in planning and scheduling preventative maintenance programs; develops and implements emergency situation plans; performs all tasks in a safe manner observing all safety practices in performance of assigned duties; trains others in the operation of new or modified computer/instrumentation systems; and upgrades existing systems as needed. Administrative Functions Assists system users in solving data and systems problems and suggests alternative methods of operation; maintains accurate records and updates shop drawings, schematics, and wiring diagrams as changes are made; maintains an inventory of parts, materials, supplies, and equipment used in everyday tasks; ensures that work orders are completed in a timely manner; provides information for budget preparation; may provide direction to temporary employees; and evaluates systems performance and recommends actions to be taken. Job Related and Essential Qualifications Demonstrated Knowledge of : Methods, practices, materials, and tools of computer/instrumentation trade; the theory, terminology, operations, equipment, and principles of electronics including practices, techniques, and tools used in the installation and maintenance and repair of electrical or electronic systems; electrical, pneumatic, instrumentation, computer, PLC, SCADA systems, and distributed control systems as they apply to wastewater treatment plant systems; applicable programming languages; computer operating systems; Electrical Safety Orders of the Division of Industrial Safety, California Code, and the National Electric Code; effective communication techniques; and federal, state, county, and local regulations and safety practices. Demonstrated Skills to : Install, program, maintain, modify, and repair computer hardware, software, PLC, and SCADA/distributed control system components; install, calibrate, maintain, and repair process instrumentation, telemetry, communication systems, and other related equipment; maintain, calibrate, and repair laboratory and safety equipment, gas detecting and alarm systems; diagnose and repair motor control systems; interpret, use, and update technical manuals, blueprints, and schematics; keep accurate, up-to-date records and prepare reports; work independently with minimal supervision; maintain parts and equipment inventory; communicate clearly and concisely, both verbally and in writing; relate effectively to those contacted in the course of work; practice safe work methods when using hand tools, test equipment, and other related equipment; understand and work from oral and written instructions as well as procedural manuals; exercise initiative and creativity in performing assigned duties; and exemplify an enthusiastic, resourceful, cooperative, and effective customer service attitude with the public, co-workers, and others contacted in the course of the work. Ability to : Effectively apply the knowledge and skills necessary for this position; and learn the systems, procedures, practices, and operations of the treatment facility and have a proactive approach to continually improve all assigned areas of responsibility. Additional Information Experience, Education, and Training Guidelines Any combination of experience, education, and training that would provide the best qualified candidates. A typical way to obtain the knowledge, skills, and abilities would be: Experience : Three years of progressively responsible experience in a wastewater treatment facility or related industrial facility, including experience maintaining and operating computer and other electronic systems. Education : Vocational/technical school certificate or an Associate degree with course work in computer science, electronics, or process control/instrumentation is desirable. Training : Any recent training such as academic courses and certification programs, which are relevant to this job classification. Certification : Possession of a California Water Environment Association (CWEA) Plant Maintenance Technologist I certification is required prior to the completion of the probationary period. Possession of a CWEA Electrical/Instrumentation Technologist Grade II certification is required within 3 years of employment. License : Possession of a valid California driver's license and a satisfactory driving record as determined by the City. Requires possession of a valid California Class A license with the appropriate endorsements prior to the completion of the probationary period. Department of Transportation (D.O.T.) Requirement : Incumbents in this job classification may be called upon, at any time, to perform safety sensitive functions, and therefore, may be subject to the Federal Highway Administration D.O.T. regulations and the City's policy concerning drug and alcohol testing as a continuing condition of employment with the City of Livermore. Other Requirements : Must be willing and able to work scheduled and emergency overtime and be available on call as required; work under adverse conditions, such as in confined and awkward spaces, in the presence of noxious odors, toxic chemicals, biological agents, and sewage; work in potentially hazardous areas; work outdoors in all weather conditions; wear and use appropriate safety clothing and equipment, including self-contained breathing devices; and travel to and attend meetings, seminars, training schools, conferences, and workshops during work and non-work hours. Special Requirements : Essential duties require the mental and/or physical ability to read fine print and fine details with no color deficiencies; drive a motor vehicle; converse on the telephone and in person and be clearly understood; detect noises in electronic equipment; operate a computer keyboard and other electronic equipment necessary for this position; manipulate small parts and components; strength to safely lift and maneuver equipment and tools weighing up to 50 pounds; and bend, stretch, reach, stoop, and climb flights of stairs for prolonged periods of time and/or numerous times each day. CITY OF LIVERMORE BENEFITS SUMMARY Association of Livermore Employees Please click here for a copy of the current Memorandum of Understanding (MOU) for the Association of Livermore Employees. The information contained here is a summary of benefits. For a more detailed summary of benefits for all employee groups, click here . Any errors or omissions do not constitute either an expressed or implied contract. Updated 1/2024 MOU TERM 10/01/2021 - 09/30/2025 SCHEDULED INCREASES 10/11/2021 2.0% + $725.40/year 10/10/2022 3.5% + $754.56/year 10/09/2023 2.5% + $777.36/year 10/07/2024 2.0% + $796.80/year CAFETERIA PLAN (MEDICAL, DENTAL & VISION) $1,950/month towards medical, dental, and vision; unused balance paid in cash to employee. BASIC LIFE INSURANCE& ACCIDENTAL DEATH & DISMEMBERMENT INSURANCE (AD & D) FT - $60,000 EE coverage or PT - $30,000 EE coverage, ER paid $1,000 dependent coverage, ER paid EE option to purchase $25,000 additional life insurance& supplemental life to $500,000 (not to exceed 5x annual earnings). LONG TERM DISABILITY (LTD) ER paid 60% of base monthly earnings to $5,000/month max. (180 day waiting period) PERS New City of Livermore EEs are enrolled in the 2% at 60 formula or 2% at 62 formula, depending on eligibility, as per AB 340. Classic PERS Misc Member - 2% at 60 Member Rate = 7% EE paid Employer Rate = 34.43%ER paid (includes unfunded liability; FY23/24) 36 consecutive months Final Comp Sick Leave Credit 4th Level 59 Survivor Ben. Military Service Credit New PERS Misc Member - 2% at 62 Member Rate = 7.5% EE paid Employer Rate = 34.43%ER paid (includes unfunded liability; FY23/24) 36 consecutive months Final Comp Sick Leave Credit 4th Level 59 Survivor Ben. Military Service Credit MEDICARE (Hired after 3/31/86) EE paid 1.45% ER paid 1.45% RETIREMENT HEALTH SAVINGS (RHS) ER contribution of 4% of base pay into RHS account. VACATION ACCRUAL Years of ServiceTotal Accrual Per Year 180.6 hrs 2-5120.12 hrs 6-10135.98 hrs 11-15160.94 hrs 16-19180.18 hrs 20+192.4 hrs Prorated for part-time EE. Maximum accrual: 340 hours HOLIDAYS & HOLIDAY-IN-LIEU PAY Holidays: 12 observed holidays or in lieu day off or if work 2.5 times pay. Holiday-In-Lieu Pay: EE's assigned receive 7.5% of base salary, paid per pay period SICK LEAVE ACCRUAL 96.2 hours/year Pro-rated for part-time EE SICK LEAVE USAGE: FAMILY SICK LEAVE : For immediate Family Illness- ½ Annual Sick Leave Accrual. PARENTAL LEAVE : For non-birthing parentwho becomes a parent due to adoption, foster care placement, or birth of a child- 48 hours BEREAVEMENT/ FUNERAL LEAVE (non-immediate family) : 3 regularly scheduled workdays of sick leavecanbe used foraunt or uncle. FUNERAL LEAVE 3 regularly scheduled workdays max for immediate family. PERSONAL LEAVE Full-Time: 16 hours per year Pro-rated for part-time EE. PREGNANCY LEAVE & FMLA/CFRA EE may use accrued leaves in compliance with City Rules & Regs Benefit provided as per regulations: Federal Family and Medical Leave Act, California Family Rights Act, and California Pregnancy Disability Act DEFERRED COMPENSATION 457(b) ER contributes $75 per pay period, with required matching of $75 by EE 2024 Maximum : Normal = $23,000 Age 50+ = $7,500 Catchup Limits = $46,000 Voluntary EE Participation SECTION 125 PLAN No ER contribution 2024 Maximum Dependent Care*: Up to $5,000/year -- *See IRS Pub #503 Unreimbursed Medical: Up to $3,200/year Pre-tax Health Care Premiums FSA's for Dependent Care Unreimbursed Medical Expenses Other options offered by plan administrator UNIFORM ALLOWANCE $850 per year/ paid in equal amounts per pay period For Public Safety Dispatchers, Senior Public Safety Dispatchers, Supervising Public Safety Dispatchers, Police Clerks, Senior Police Clerk, Supervising Police Clerk, Animal Control Officers, Police Identification Technician, Supervising Property and Evidence Specialist, Property and Evidence Specialist, Community Service Specialists, Crime & Intelligence Analysts, and Crime Prevention Specialist. SAFETY SHOE ALLOWANCE Paid annually in July: $200/year for Meter Readers, and employees in Engineering Technician, Neighborhood Preservation Officer, and Building Inspector series who perform field work, and Public Works employees that are required to wear safety shoes or boots. PRESCRIPTION SAFETY GLASSES Reimbursement of up to $150/year for purchase of safety prescription glasses for EEs working in locations where there is a risk of eye injuries. SHIFT DIFFERENTIAL EEs regularly assigned to city facilities operating 24/7 - $2.50/hour for all hours worked when assigned to a shift requiring EE work at least 4 hours between 4:00 p.m.- 6:00 a.m. EQUIPMENT OPERATION Public Works EEs: $12.00/day for EE who operates Class A vehicle, min of 50%+ operation/day. STANDBY PAY 2 hours straight-time for standby on regularly scheduled work day 3 hours straight-time for standby on regularly scheduled days off and fixed City holidays CALL BACK PAY 3 hours min @ OT rate for FLSA nonexempt. First 3 hours can't be taken as comp time but paid to EE. WORK IN A HIGHER CLASS If work min of 3 consecutive workdays, paid @ 5% differential or the minimum of the salary range of the higher classification. COURT PAY/COURT CANCELLATION PAY If in connection with EE's usual official duties, 3 hrs min @ OT, or 4 hrs min @ OT for those required to appear on normal day off or on graveyard shift. SUPPORT SERVICES TRAINING OFFICER PAY $90/pay period for full pay period while assigned. BILINGUAL PAY $60/pay period for both written & conversational. Must be certified by Department Head and approved by Admin Services Director, and used on the job. $35/pay period for conversation level as certified by Department Head and approved by Admin Services Director. TELEPHONE PAY 20 minutes and for each minute exceeding 20 minutes at OT rate. CELL PHONE ALLOWANCE Standard = $40/month (if authorized) See Administrative Regulation 36 for details. COMMERCIAL DRIVERS' LICENSE PAY $35/pay period with valid CA Commercial Driver's License and valid DOT medical card. OT COMP & COMP TIME OFF OT for > 40 hrs/week or > 8 hrs/day in a reg scheduled day or hrs in excess of those normally scheduled & worked/day @ 1 ½ x reg. pay or Comp Time in lieu of OT for FLSA nonexempt. Accrued Comp Time in excess of 100 hours must be paid out. TUITION REIMBURSEMENT 75% reimbursement fortuition & books For undergraduate studies, $4,000 FY max; $16,000 lifetime max For graduate studies, $5,000 FY max; $10,000 lifetime max LICENSES & CERTIFICATIONS 100% reimbursement for required licenses and certifications EMPLOYEE ASSISTANCE PROGRAM Three (3) sessions per incident per family member. Unlimited telephonic consultations. FLSA WORK PERIOD 168 hour pay period beginning Monday at 12:01 a.m., ending 7 days later on Sunday at 12:00 midnight. If an EE is not on this work week schedule, something must be in writing documenting EE's work week. For WR Operator series : 168 hour period beginning Sunday at 12:00 midnight, ending 7 days later on Saturday at 11:59 p.m. PAY PERIODS 26 pay periods per year Benefits listed are for regular full-time employees. Benefits are prorated for 30-hour and 20-hour employees. ER = Employer EE = Employee FT = Full-Time PT = Part-Time Closing Date/Time: 5/27/2024 5:00 PM Pacific
Description Click here for the job announcement ! The Water Resources Division provides a dynamic and supportive work environment providing critical services to the community. Come join the team at the Water Reclamation Plant - 101 West Jack London Boulevard in Livermore! There are three (3) Water Resources Instrument Control Technician vacancies to be filled. DEFINITION Under general supervision, the Water Resources Instrument Control Technician installs, operates, maintains, calibrates, and repairs computer hardware, process instrumentation, data logging, and telemetry; de-bugs, modifies, and customizes software; modifies, maintains, and repairs all components of a programmable logic controller (PLC) based supervisory control and data acquisition (SCADA) systems/distributed control systems; and performs other duties as assigned. DISTINGUISHING CHARACTERISTICS This classification is distinguished by the specialized, technical assignments in support of SCADA systems, PLC's, distributed control systems, computer networking systems, software and instrumentation, telemetry, lab analytical equipment, safety systems, and other related systems. Incumbents will be expected to work independently in modifying, maintaining, and operating the above referenced systems. SUPERVISION RECEIVED General supervision is provided by a Public Works Supervisor and the WR Coordinator - Electrical & Instrumentation Control. SUPERVISION EXERCISED None. Examples of Important and Essential Functions Technical Functions Installs, calibrates, programs, maintains, and repairs instruments, PLC based system/distributed control system components, meters, analyzers, recorders, control and feed systems, computers, monitors, printers, transducers, microprocessors, and data transmission systems; repairs electronics, electrical, pneumatic, mechanical, and hydraulic systems; maintains and repairs laboratory and safety equipment including gas detection, alarm systems, pH and DO meters; analyzes software problems; modifies computer programs to optimize plant operations and operator convenience; analyzes problems and repairs equipment to component level; analyzes problems and repairs 480 volt alternating current (AC) motor control centers; installs and configures security systems including access control and video system; performs service and maintenance work on a variety of electrical installations, systems, pumps, meters, and other equipment in City facilities; operates diagnostic instruments such as a voltmeter, megger, ammeter, ohmmeter, transistor checker, loop meter, and other electrical test equipment installs and repairs; replaces outlets, lighting fixtures, switches, ballasts, conduit runs and distribution panels; assists in planning and scheduling preventative maintenance programs; develops and implements emergency situation plans; performs all tasks in a safe manner observing all safety practices in performance of assigned duties; trains others in the operation of new or modified computer/instrumentation systems; and upgrades existing systems as needed. Administrative Functions Assists system users in solving data and systems problems and suggests alternative methods of operation; maintains accurate records and updates shop drawings, schematics, and wiring diagrams as changes are made; maintains an inventory of parts, materials, supplies, and equipment used in everyday tasks; ensures that work orders are completed in a timely manner; provides information for budget preparation; may provide direction to temporary employees; and evaluates systems performance and recommends actions to be taken. Job Related and Essential Qualifications Demonstrated Knowledge of : Methods, practices, materials, and tools of computer/instrumentation trade; the theory, terminology, operations, equipment, and principles of electronics including practices, techniques, and tools used in the installation and maintenance and repair of electrical or electronic systems; electrical, pneumatic, instrumentation, computer, PLC, SCADA systems, and distributed control systems as they apply to wastewater treatment plant systems; applicable programming languages; computer operating systems; Electrical Safety Orders of the Division of Industrial Safety, California Code, and the National Electric Code; effective communication techniques; and federal, state, county, and local regulations and safety practices. Demonstrated Skills to : Install, program, maintain, modify, and repair computer hardware, software, PLC, and SCADA/distributed control system components; install, calibrate, maintain, and repair process instrumentation, telemetry, communication systems, and other related equipment; maintain, calibrate, and repair laboratory and safety equipment, gas detecting and alarm systems; diagnose and repair motor control systems; interpret, use, and update technical manuals, blueprints, and schematics; keep accurate, up-to-date records and prepare reports; work independently with minimal supervision; maintain parts and equipment inventory; communicate clearly and concisely, both verbally and in writing; relate effectively to those contacted in the course of work; practice safe work methods when using hand tools, test equipment, and other related equipment; understand and work from oral and written instructions as well as procedural manuals; exercise initiative and creativity in performing assigned duties; and exemplify an enthusiastic, resourceful, cooperative, and effective customer service attitude with the public, co-workers, and others contacted in the course of the work. Ability to : Effectively apply the knowledge and skills necessary for this position; and learn the systems, procedures, practices, and operations of the treatment facility and have a proactive approach to continually improve all assigned areas of responsibility. Additional Information Experience, Education, and Training Guidelines Any combination of experience, education, and training that would provide the best qualified candidates. A typical way to obtain the knowledge, skills, and abilities would be: Experience : Three years of progressively responsible experience in a wastewater treatment facility or related industrial facility, including experience maintaining and operating computer and other electronic systems. Education : Vocational/technical school certificate or an Associate degree with course work in computer science, electronics, or process control/instrumentation is desirable. Training : Any recent training such as academic courses and certification programs, which are relevant to this job classification. Certification : Possession of a California Water Environment Association (CWEA) Plant Maintenance Technologist I certification is required prior to the completion of the probationary period. Possession of a CWEA Electrical/Instrumentation Technologist Grade II certification is required within 3 years of employment. License : Possession of a valid California driver's license and a satisfactory driving record as determined by the City. Requires possession of a valid California Class A license with the appropriate endorsements prior to the completion of the probationary period. Department of Transportation (D.O.T.) Requirement : Incumbents in this job classification may be called upon, at any time, to perform safety sensitive functions, and therefore, may be subject to the Federal Highway Administration D.O.T. regulations and the City's policy concerning drug and alcohol testing as a continuing condition of employment with the City of Livermore. Other Requirements : Must be willing and able to work scheduled and emergency overtime and be available on call as required; work under adverse conditions, such as in confined and awkward spaces, in the presence of noxious odors, toxic chemicals, biological agents, and sewage; work in potentially hazardous areas; work outdoors in all weather conditions; wear and use appropriate safety clothing and equipment, including self-contained breathing devices; and travel to and attend meetings, seminars, training schools, conferences, and workshops during work and non-work hours. Special Requirements : Essential duties require the mental and/or physical ability to read fine print and fine details with no color deficiencies; drive a motor vehicle; converse on the telephone and in person and be clearly understood; detect noises in electronic equipment; operate a computer keyboard and other electronic equipment necessary for this position; manipulate small parts and components; strength to safely lift and maneuver equipment and tools weighing up to 50 pounds; and bend, stretch, reach, stoop, and climb flights of stairs for prolonged periods of time and/or numerous times each day. CITY OF LIVERMORE BENEFITS SUMMARY Association of Livermore Employees Please click here for a copy of the current Memorandum of Understanding (MOU) for the Association of Livermore Employees. The information contained here is a summary of benefits. For a more detailed summary of benefits for all employee groups, click here . Any errors or omissions do not constitute either an expressed or implied contract. Updated 1/2024 MOU TERM 10/01/2021 - 09/30/2025 SCHEDULED INCREASES 10/11/2021 2.0% + $725.40/year 10/10/2022 3.5% + $754.56/year 10/09/2023 2.5% + $777.36/year 10/07/2024 2.0% + $796.80/year CAFETERIA PLAN (MEDICAL, DENTAL & VISION) $1,950/month towards medical, dental, and vision; unused balance paid in cash to employee. BASIC LIFE INSURANCE& ACCIDENTAL DEATH & DISMEMBERMENT INSURANCE (AD & D) FT - $60,000 EE coverage or PT - $30,000 EE coverage, ER paid $1,000 dependent coverage, ER paid EE option to purchase $25,000 additional life insurance& supplemental life to $500,000 (not to exceed 5x annual earnings). LONG TERM DISABILITY (LTD) ER paid 60% of base monthly earnings to $5,000/month max. (180 day waiting period) PERS New City of Livermore EEs are enrolled in the 2% at 60 formula or 2% at 62 formula, depending on eligibility, as per AB 340. Classic PERS Misc Member - 2% at 60 Member Rate = 7% EE paid Employer Rate = 34.43%ER paid (includes unfunded liability; FY23/24) 36 consecutive months Final Comp Sick Leave Credit 4th Level 59 Survivor Ben. Military Service Credit New PERS Misc Member - 2% at 62 Member Rate = 7.5% EE paid Employer Rate = 34.43%ER paid (includes unfunded liability; FY23/24) 36 consecutive months Final Comp Sick Leave Credit 4th Level 59 Survivor Ben. Military Service Credit MEDICARE (Hired after 3/31/86) EE paid 1.45% ER paid 1.45% RETIREMENT HEALTH SAVINGS (RHS) ER contribution of 4% of base pay into RHS account. VACATION ACCRUAL Years of ServiceTotal Accrual Per Year 180.6 hrs 2-5120.12 hrs 6-10135.98 hrs 11-15160.94 hrs 16-19180.18 hrs 20+192.4 hrs Prorated for part-time EE. Maximum accrual: 340 hours HOLIDAYS & HOLIDAY-IN-LIEU PAY Holidays: 12 observed holidays or in lieu day off or if work 2.5 times pay. Holiday-In-Lieu Pay: EE's assigned receive 7.5% of base salary, paid per pay period SICK LEAVE ACCRUAL 96.2 hours/year Pro-rated for part-time EE SICK LEAVE USAGE: FAMILY SICK LEAVE : For immediate Family Illness- ½ Annual Sick Leave Accrual. PARENTAL LEAVE : For non-birthing parentwho becomes a parent due to adoption, foster care placement, or birth of a child- 48 hours BEREAVEMENT/ FUNERAL LEAVE (non-immediate family) : 3 regularly scheduled workdays of sick leavecanbe used foraunt or uncle. FUNERAL LEAVE 3 regularly scheduled workdays max for immediate family. PERSONAL LEAVE Full-Time: 16 hours per year Pro-rated for part-time EE. PREGNANCY LEAVE & FMLA/CFRA EE may use accrued leaves in compliance with City Rules & Regs Benefit provided as per regulations: Federal Family and Medical Leave Act, California Family Rights Act, and California Pregnancy Disability Act DEFERRED COMPENSATION 457(b) ER contributes $75 per pay period, with required matching of $75 by EE 2024 Maximum : Normal = $23,000 Age 50+ = $7,500 Catchup Limits = $46,000 Voluntary EE Participation SECTION 125 PLAN No ER contribution 2024 Maximum Dependent Care*: Up to $5,000/year -- *See IRS Pub #503 Unreimbursed Medical: Up to $3,200/year Pre-tax Health Care Premiums FSA's for Dependent Care Unreimbursed Medical Expenses Other options offered by plan administrator UNIFORM ALLOWANCE $850 per year/ paid in equal amounts per pay period For Public Safety Dispatchers, Senior Public Safety Dispatchers, Supervising Public Safety Dispatchers, Police Clerks, Senior Police Clerk, Supervising Police Clerk, Animal Control Officers, Police Identification Technician, Supervising Property and Evidence Specialist, Property and Evidence Specialist, Community Service Specialists, Crime & Intelligence Analysts, and Crime Prevention Specialist. SAFETY SHOE ALLOWANCE Paid annually in July: $200/year for Meter Readers, and employees in Engineering Technician, Neighborhood Preservation Officer, and Building Inspector series who perform field work, and Public Works employees that are required to wear safety shoes or boots. PRESCRIPTION SAFETY GLASSES Reimbursement of up to $150/year for purchase of safety prescription glasses for EEs working in locations where there is a risk of eye injuries. SHIFT DIFFERENTIAL EEs regularly assigned to city facilities operating 24/7 - $2.50/hour for all hours worked when assigned to a shift requiring EE work at least 4 hours between 4:00 p.m.- 6:00 a.m. EQUIPMENT OPERATION Public Works EEs: $12.00/day for EE who operates Class A vehicle, min of 50%+ operation/day. STANDBY PAY 2 hours straight-time for standby on regularly scheduled work day 3 hours straight-time for standby on regularly scheduled days off and fixed City holidays CALL BACK PAY 3 hours min @ OT rate for FLSA nonexempt. First 3 hours can't be taken as comp time but paid to EE. WORK IN A HIGHER CLASS If work min of 3 consecutive workdays, paid @ 5% differential or the minimum of the salary range of the higher classification. COURT PAY/COURT CANCELLATION PAY If in connection with EE's usual official duties, 3 hrs min @ OT, or 4 hrs min @ OT for those required to appear on normal day off or on graveyard shift. SUPPORT SERVICES TRAINING OFFICER PAY $90/pay period for full pay period while assigned. BILINGUAL PAY $60/pay period for both written & conversational. Must be certified by Department Head and approved by Admin Services Director, and used on the job. $35/pay period for conversation level as certified by Department Head and approved by Admin Services Director. TELEPHONE PAY 20 minutes and for each minute exceeding 20 minutes at OT rate. CELL PHONE ALLOWANCE Standard = $40/month (if authorized) See Administrative Regulation 36 for details. COMMERCIAL DRIVERS' LICENSE PAY $35/pay period with valid CA Commercial Driver's License and valid DOT medical card. OT COMP & COMP TIME OFF OT for > 40 hrs/week or > 8 hrs/day in a reg scheduled day or hrs in excess of those normally scheduled & worked/day @ 1 ½ x reg. pay or Comp Time in lieu of OT for FLSA nonexempt. Accrued Comp Time in excess of 100 hours must be paid out. TUITION REIMBURSEMENT 75% reimbursement fortuition & books For undergraduate studies, $4,000 FY max; $16,000 lifetime max For graduate studies, $5,000 FY max; $10,000 lifetime max LICENSES & CERTIFICATIONS 100% reimbursement for required licenses and certifications EMPLOYEE ASSISTANCE PROGRAM Three (3) sessions per incident per family member. Unlimited telephonic consultations. FLSA WORK PERIOD 168 hour pay period beginning Monday at 12:01 a.m., ending 7 days later on Sunday at 12:00 midnight. If an EE is not on this work week schedule, something must be in writing documenting EE's work week. For WR Operator series : 168 hour period beginning Sunday at 12:00 midnight, ending 7 days later on Saturday at 11:59 p.m. PAY PERIODS 26 pay periods per year Benefits listed are for regular full-time employees. Benefits are prorated for 30-hour and 20-hour employees. ER = Employer EE = Employee FT = Full-Time PT = Part-Time Closing Date/Time: 5/27/2024 5:00 PM Pacific
City of Sacramento, CA
Sacramento, California, United States
THE POSITION With supervisor approval, incumbents may be eligible for intermittent remote work; however, they must physically reside within the Sacramento region or have the ability to regularly report to a City of Sacramento physical worksite with little notice. The City of Sacramento Community Development Department is seeking a Plans Examiner III to work in the Building Division, Plan Review Section. IDEAL CANDIDATE STATEMENT The ideal candidate will have experience in building construction, building materials and construction methods, reading residential and commercial building plans, as well as experience interpreting and applying the California Building Standards Codes. The ideal candidate should possess excellent customer service and communication skills with the ability to think critically to resolve complex building code issues. Make an impact on your community by joining the City of Sacramento’s vibrant and dynamic building team. Under general supervision, receives and conducts detailed, comprehensive technical reviews of residential and commercial permit applications and building plans; provides lead work direction to subordinate personnel; provides customer service, assistance and information to members of the public pertaining to building codes and regulations, including structural, plumbing, electrical and mechanical aspects of building construction; assists in resolving complex problems regarding plan submissions and sufficiency. DISTINGUISHING CHARACTERISTICS This is the advanced journey, lead-level of the Plans Examiner classification series. Work in this class is distinguished from the lower level of Plans Examiner II by the independence with which an incumbent operates, make decisions in accordance with established rules and procedures and by the assignment of the most complex plan check responsibilities requiring comprehensive technical knowledge and expertise, in addition to the responsibility to provide lead work direction and oversight to subordinate personnel. SUPERVISION RECEIVED AND EXERCISED Direct supervision is provided by higher-level supervisory or management personnel. Incumbents provide indirect supervision and lead work direction to subordinate personnel. ESSENTIAL DUTIES AND RESPONSIBILITIES • Serves as the initial contact for members of the public submitting permit applications and building plans for review and approval. Provides customer service, technical assistance and information to customers. • Conducts the most complex technical reviews of all aspects of building plans for completeness, accuracy and compliance with established building codes and regulations, including structural, electrical, plumbing and/or mechanical systems. • Confers with and assists builders, engineers, architects, contractors and the public regarding building codes and permit requirements; responds to questions and inquiries and performs special investigations of complex building and construction related issues in order to develop resolutions to problems. • Coordinates plan check activities with other City departments and personnel. • Maintains and updates records of building plans and files; prepares required reports and correspondence as required. • Provides day-to-day work direction, lead and technical oversight to subordinate personnel. • Other related duties may also be performed; not all duties listed are necessarily performed by each individual holding this classification. QUALIFICATIONS Knowledge of: • Principles and practices of plan review. • Industry standard technical specifications for commercial and residential construction methods and materials including, electrical, plumbing, and mechanical systems and sub-systems. • Building construction and design practices. • Pertinent Federal, State and City Ordinances, laws and regulations including Uniform Building, Plumbing, Mechanical, Electrical and Fire codes. Skill in: • Identifying sufficiency, accuracy and completeness of building and construction plan submissions and compliance with applicable codes. • Interpreting the most complex technical requirements and perform calculations related to structural, electrical, plumbing and mechanical systems and sub-systems. • Responding to technical questions and providing assistance to members of the public. Ability to: • Accurately perform comprehensive plan checks in a timely, responsive manner. • Resolve difficult technical issues and problems while ensuring customer service standards are satisfied. • Identify technical and procedural deficiencies in plan submissions and accurately communicate required corrections or changes. EXPERIENCE AND EDUCATION Any combination equivalent to experience and education that could likely provide the required knowledge and abilities would be qualifying. A typical way to obtain the knowledge and abilities would be: Experience: Six years of experience in building construction work that involved the use of engineering or architectural building plans; performing comprehensive building construction plan check work in a municipal or county government agency and an accredited plan examiner certificate; or equivalent experience as a building or construction inspector in a municipal or county government agency. Education: Completion of high school or possession of a G.E.D. certificate. Substitution: Each year of college education in building construction, engineering, drafting, architecture or related courses may substitute for a year of experience. PROOF OF EDUCATION Should education be used to qualify for this position, then proof of education such as, but not limited to, university/college transcripts and degrees should be submitted with your application and will be required at the time of appointment . Unofficial documents and/or copies are acceptable. An applicant with a college degree obtained outside the United States must have education records evaluated by a credentials evaluation service. Evaluation of education records will be due at time of appointment. SPECIAL QUALIFICATIONS Building Plans Examiner Certificate: Possession of a valid Building Plans Examiner certificate from the International Code Council (ICC) at the time of appointment. Driver License: Possession of a valid California Class C Drivers License at the time of appointment. Loss of the Class C License is cause for discipline. Individuals who do not meet this requirement due to physical disability will be reviewed on a case-by-case basis. PROOF OF CERTIFICATION Proof of the required certificate and/or license should be submitted with your application and will be required at the time of appointment . Unofficial documents and/or copies are acceptable. PROBATIONARY PERIOD Employees must complete twelve (12) months of probation at a satisfactory performance level prior to gaining permanent status. THE SELECTION PROCEDURE P lease note, the City of Sacramento's preferred method of communication with applicants is via e-mail. As such, please ensure you verify the e-mail address on your application, and check your e-mail frequently , including your spam and junk folders. All e-mail notifications can also be accessed through the governmentjobs.com applicant inbox. 1. Application: (Pass/Fail) - All applicants must complete and submit online a City of Sacramento employment application by the final filing deadline ; Employment applications must be submitted online; paper applications will not be accepted. Employment applications will be considered incomplete and will be disqualified: If applicants do not list current and/or past job-related experience in the duties area of the "Work Experience" section. Note: Qualifying experience is based on full-time experience (40 hours per week). Qualifying experience is calculated to the full-time equivalent (pro-rated if less than 40 hours/week ). If "see resume" is noted in the "Work Experience" section; a resume will not substitute for the information required in the "Work Experience" section. Proof of education such as, but not limited to, university/college transcripts and degrees should be submitted online with your application. Proof of education will be required at time of appointment. Proof of certification and/or license should be submitted online with your application. Proof of certification and/or license will be required at time of appointment. Position/job titles will not be considered in determining eligibility for meeting the minimum qualifications for this position. If you’re requesting Veteran’s credit, a copy of your DD214 must be submitted online with your application or emailed to the Employment Office by the final filing deadline . Information regarding the use of Veteran’s credit can be found in the Civil Service Board rules under rule 4.9C. Applicants are responsible for attaching a copy of their DD214 to each position for which they apply. 2. Training and Experience Exam : (Weighted 100%) - The questions located at the end of the application are the Training and Experience (T&E) Exam. Responses to the T&E questions will be rated and scored. This exam will evaluate the relevance, level, and progression of a candidate's education, training and experience. The exam score will determine your ranking on the eligible list for this job. When completing the T&E questions, please note: Responses to the T&E questions must be submitted online; paper questionnaires will not be accepted. A resume will not substitute for the information required in the T&E questions. 3. Eligibility : Candidates who pass the Training and Experience Test will be placed on the eligible list. The hiring department may contact candidates for interview at any time during the life of the one-year list. Candidate’s eligibility expires one year from the date of notification of a passing score for the Plans Examiner III examination. 4. Screening Committee : (Pass/Fail)- All candidates that pass the examination and are in one of the top three ranks will have their application forwarded to the hiring department for review. The hiring department will select the most competitive applications for further consideration. Human Resources will only evaluate employment applications for the minimum qualifications, as stated on the job announcement, for applications selected by the hiring department. 5. Conditional Hire: Upon receipt of a conditional offer, the selected candidate must complete and pass Live Scan/fingerprinting. If applicable, candidates may also need to pass a pre-employment medical exam, controlled substance and/or alcohol test, and possess any required licensure or certification prior to receiving a start date from the Department. Failure to meet these prerequisites will be grounds for withdrawal of your conditional offer of employment. QUESTIONS: For questions concerning this job announcement and the application process: Please visit https://www.governmentjobs.com/Home/ApplicationGuide for a comprehensive, step-by-step guide to the application process. For technical support between 6 AM - 5 PM PT, contact Live Applicant Support at (855) 524-5627. Visit the City of Sacramento Human Resources Department website at https://www.cityofsacramento.gov/HR/employment ; Send an email to employment@cityofsacramento.org ; or Call the Human Resources Department at (916) 808-5726 Bilingual Pay Did you know that the City offers bilingual pay? That's right, most labor agreements offer the option of providing employees with bilingual pay if the department deems it to be operationally necessary. Pension Reform Act The City of Sacramento is covered by the California Public Employees' Retirement System, and as such, must adhere to the California Public Employee's Pension Reform Act (PEPRA) of 2013. Please note that the provisions within this act may affect or impact an applicant's eligibility and/or selection for open vacancies at the City of Sacramento. Equal Opportunity Employer The City of Sacramento is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. Additional Information Civil Service Rules: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/CivilServiceBoardRules62012.pdf Union Contracts: https://www.cityofsacramento.gov/HR/labor-agreements.html Salary Schedule: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/SalarySchedule.pdf Closing Date/Time: 5/12/2024 11:59 PM Pacific
THE POSITION With supervisor approval, incumbents may be eligible for intermittent remote work; however, they must physically reside within the Sacramento region or have the ability to regularly report to a City of Sacramento physical worksite with little notice. The City of Sacramento Community Development Department is seeking a Plans Examiner III to work in the Building Division, Plan Review Section. IDEAL CANDIDATE STATEMENT The ideal candidate will have experience in building construction, building materials and construction methods, reading residential and commercial building plans, as well as experience interpreting and applying the California Building Standards Codes. The ideal candidate should possess excellent customer service and communication skills with the ability to think critically to resolve complex building code issues. Make an impact on your community by joining the City of Sacramento’s vibrant and dynamic building team. Under general supervision, receives and conducts detailed, comprehensive technical reviews of residential and commercial permit applications and building plans; provides lead work direction to subordinate personnel; provides customer service, assistance and information to members of the public pertaining to building codes and regulations, including structural, plumbing, electrical and mechanical aspects of building construction; assists in resolving complex problems regarding plan submissions and sufficiency. DISTINGUISHING CHARACTERISTICS This is the advanced journey, lead-level of the Plans Examiner classification series. Work in this class is distinguished from the lower level of Plans Examiner II by the independence with which an incumbent operates, make decisions in accordance with established rules and procedures and by the assignment of the most complex plan check responsibilities requiring comprehensive technical knowledge and expertise, in addition to the responsibility to provide lead work direction and oversight to subordinate personnel. SUPERVISION RECEIVED AND EXERCISED Direct supervision is provided by higher-level supervisory or management personnel. Incumbents provide indirect supervision and lead work direction to subordinate personnel. ESSENTIAL DUTIES AND RESPONSIBILITIES • Serves as the initial contact for members of the public submitting permit applications and building plans for review and approval. Provides customer service, technical assistance and information to customers. • Conducts the most complex technical reviews of all aspects of building plans for completeness, accuracy and compliance with established building codes and regulations, including structural, electrical, plumbing and/or mechanical systems. • Confers with and assists builders, engineers, architects, contractors and the public regarding building codes and permit requirements; responds to questions and inquiries and performs special investigations of complex building and construction related issues in order to develop resolutions to problems. • Coordinates plan check activities with other City departments and personnel. • Maintains and updates records of building plans and files; prepares required reports and correspondence as required. • Provides day-to-day work direction, lead and technical oversight to subordinate personnel. • Other related duties may also be performed; not all duties listed are necessarily performed by each individual holding this classification. QUALIFICATIONS Knowledge of: • Principles and practices of plan review. • Industry standard technical specifications for commercial and residential construction methods and materials including, electrical, plumbing, and mechanical systems and sub-systems. • Building construction and design practices. • Pertinent Federal, State and City Ordinances, laws and regulations including Uniform Building, Plumbing, Mechanical, Electrical and Fire codes. Skill in: • Identifying sufficiency, accuracy and completeness of building and construction plan submissions and compliance with applicable codes. • Interpreting the most complex technical requirements and perform calculations related to structural, electrical, plumbing and mechanical systems and sub-systems. • Responding to technical questions and providing assistance to members of the public. Ability to: • Accurately perform comprehensive plan checks in a timely, responsive manner. • Resolve difficult technical issues and problems while ensuring customer service standards are satisfied. • Identify technical and procedural deficiencies in plan submissions and accurately communicate required corrections or changes. EXPERIENCE AND EDUCATION Any combination equivalent to experience and education that could likely provide the required knowledge and abilities would be qualifying. A typical way to obtain the knowledge and abilities would be: Experience: Six years of experience in building construction work that involved the use of engineering or architectural building plans; performing comprehensive building construction plan check work in a municipal or county government agency and an accredited plan examiner certificate; or equivalent experience as a building or construction inspector in a municipal or county government agency. Education: Completion of high school or possession of a G.E.D. certificate. Substitution: Each year of college education in building construction, engineering, drafting, architecture or related courses may substitute for a year of experience. PROOF OF EDUCATION Should education be used to qualify for this position, then proof of education such as, but not limited to, university/college transcripts and degrees should be submitted with your application and will be required at the time of appointment . Unofficial documents and/or copies are acceptable. An applicant with a college degree obtained outside the United States must have education records evaluated by a credentials evaluation service. Evaluation of education records will be due at time of appointment. SPECIAL QUALIFICATIONS Building Plans Examiner Certificate: Possession of a valid Building Plans Examiner certificate from the International Code Council (ICC) at the time of appointment. Driver License: Possession of a valid California Class C Drivers License at the time of appointment. Loss of the Class C License is cause for discipline. Individuals who do not meet this requirement due to physical disability will be reviewed on a case-by-case basis. PROOF OF CERTIFICATION Proof of the required certificate and/or license should be submitted with your application and will be required at the time of appointment . Unofficial documents and/or copies are acceptable. PROBATIONARY PERIOD Employees must complete twelve (12) months of probation at a satisfactory performance level prior to gaining permanent status. THE SELECTION PROCEDURE P lease note, the City of Sacramento's preferred method of communication with applicants is via e-mail. As such, please ensure you verify the e-mail address on your application, and check your e-mail frequently , including your spam and junk folders. All e-mail notifications can also be accessed through the governmentjobs.com applicant inbox. 1. Application: (Pass/Fail) - All applicants must complete and submit online a City of Sacramento employment application by the final filing deadline ; Employment applications must be submitted online; paper applications will not be accepted. Employment applications will be considered incomplete and will be disqualified: If applicants do not list current and/or past job-related experience in the duties area of the "Work Experience" section. Note: Qualifying experience is based on full-time experience (40 hours per week). Qualifying experience is calculated to the full-time equivalent (pro-rated if less than 40 hours/week ). If "see resume" is noted in the "Work Experience" section; a resume will not substitute for the information required in the "Work Experience" section. Proof of education such as, but not limited to, university/college transcripts and degrees should be submitted online with your application. Proof of education will be required at time of appointment. Proof of certification and/or license should be submitted online with your application. Proof of certification and/or license will be required at time of appointment. Position/job titles will not be considered in determining eligibility for meeting the minimum qualifications for this position. If you’re requesting Veteran’s credit, a copy of your DD214 must be submitted online with your application or emailed to the Employment Office by the final filing deadline . Information regarding the use of Veteran’s credit can be found in the Civil Service Board rules under rule 4.9C. Applicants are responsible for attaching a copy of their DD214 to each position for which they apply. 2. Training and Experience Exam : (Weighted 100%) - The questions located at the end of the application are the Training and Experience (T&E) Exam. Responses to the T&E questions will be rated and scored. This exam will evaluate the relevance, level, and progression of a candidate's education, training and experience. The exam score will determine your ranking on the eligible list for this job. When completing the T&E questions, please note: Responses to the T&E questions must be submitted online; paper questionnaires will not be accepted. A resume will not substitute for the information required in the T&E questions. 3. Eligibility : Candidates who pass the Training and Experience Test will be placed on the eligible list. The hiring department may contact candidates for interview at any time during the life of the one-year list. Candidate’s eligibility expires one year from the date of notification of a passing score for the Plans Examiner III examination. 4. Screening Committee : (Pass/Fail)- All candidates that pass the examination and are in one of the top three ranks will have their application forwarded to the hiring department for review. The hiring department will select the most competitive applications for further consideration. Human Resources will only evaluate employment applications for the minimum qualifications, as stated on the job announcement, for applications selected by the hiring department. 5. Conditional Hire: Upon receipt of a conditional offer, the selected candidate must complete and pass Live Scan/fingerprinting. If applicable, candidates may also need to pass a pre-employment medical exam, controlled substance and/or alcohol test, and possess any required licensure or certification prior to receiving a start date from the Department. Failure to meet these prerequisites will be grounds for withdrawal of your conditional offer of employment. QUESTIONS: For questions concerning this job announcement and the application process: Please visit https://www.governmentjobs.com/Home/ApplicationGuide for a comprehensive, step-by-step guide to the application process. For technical support between 6 AM - 5 PM PT, contact Live Applicant Support at (855) 524-5627. Visit the City of Sacramento Human Resources Department website at https://www.cityofsacramento.gov/HR/employment ; Send an email to employment@cityofsacramento.org ; or Call the Human Resources Department at (916) 808-5726 Bilingual Pay Did you know that the City offers bilingual pay? That's right, most labor agreements offer the option of providing employees with bilingual pay if the department deems it to be operationally necessary. Pension Reform Act The City of Sacramento is covered by the California Public Employees' Retirement System, and as such, must adhere to the California Public Employee's Pension Reform Act (PEPRA) of 2013. Please note that the provisions within this act may affect or impact an applicant's eligibility and/or selection for open vacancies at the City of Sacramento. Equal Opportunity Employer The City of Sacramento is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. Additional Information Civil Service Rules: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/CivilServiceBoardRules62012.pdf Union Contracts: https://www.cityofsacramento.gov/HR/labor-agreements.html Salary Schedule: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/SalarySchedule.pdf Closing Date/Time: 5/12/2024 11:59 PM Pacific