California State Polytechnic University Pomona
3801 West Temple Avenue, Pomona, CA 91768, USA
Type of Appointment : Full-Time, Probationary Job Classification : Facilities Maintenance Mechanic Anticipated Hiring Amount : $5,787 per month ($69,444 annually) Work Hours : Monday - Friday, 8am - 5pm, unless otherwise notified Recruitment Closing Date : May 22, 2024 THE DEPARTMENT: Facilities Planning and Management (FP&M) serves as the lead organization for planning, developing, and maintaining the campus ‘natural and built environments in support of the university’s mission. The department seeks to preserve and enhance CPP’s history, aesthetics, physical assets, and natural ecosystems through coordinated planning, design, and construction of buildings, roads, infrastructure, landscaping and other physical improvements. As an advocate on behalf of the university and its auxiliaries, FPM strives to provide facilities that meet scope, budget, operational needs and functional requirements. FPM is comprised of approximately 200 facilities professionals (FTE) that also provides maintenance services including custodial services, landscaping, recycling, building and mechanical trades, energy and utility management, and auto fleet services. The workforce is culturally diverse and multilingual. Its composition includes full time staff throughout FPM who are also earning their degrees and many whom have graduated from Cal Poly Pomona. The staff includes licensed architects and engineers, accountants, planners, project managers, administrative staff, carpenters, plumbers, locksmiths, painters, electricians, landscapers, computer technicians, custodians and other building and mechanical trade technicians. DUTIES AND RESPONSIBILITIES: Working in a team environment, under the general supervision of the Manager of MEP Services and the Supervising and/or Lead Building Service Engineer and primarily responsible for the following: Responsible to perform general routine and preventative maintenance and repairs of the buildings’ mechanical equipment and associated apparatus including work on the utility infrastructure. Perform corrective and preventive maintenance on pumps, pump seals, pump bearings, motors, motor bearings and blower fan bearings, shaft alignments and air compressors. May work in a team or independently, to clean pools & decorative fountains, clean equipment rooms, collect utility meter readings, and perform other related duties as assigned by the shop supervisor and/or lead. Works with journeymen Building Service Engineers on inspecting, troubleshooting, diagnosing and performing preventative maintenance and complex repairs on stationary HVAC equipment such as boilers, chillers, ventilation systems, fans, motors, compressors, condensers, cooling towers, pumps, water treatment systems, and all other associated equipment related to HVAC systems. Incumbent must learn to safely troubleshoot and repair mechanical equipment and apparatus using various test instruments. Learn and expand knowledge on maintaining HVAC controls systems, and other building automation systems such as integrated lighting controls. Incumbent would perform daily assigned work orders and respond to periodic service calls from faculties and staff for hot and cold discomfort calls, report of strange smells, noises, and water leaks, and making minor adjustments and repairs to the mechanical systems to improve occupancy comforts, while providing quality customer service. Perform administrative duties and attend training related to the position. Using the TMA system incumbent is required to routinely and timely enter material and labor hours expended and technician notes related to execution of work orders. Provide material lists and/or estimated labor hours needed to perform specific task or assignments. Attend training classes related to the positions and for professional development to expand mechanical knowledge and skillsets. Maintains a safe, clean and organized work environment that would include the mechanical rooms, trades shops, and assigned service vehicles, tools and equipment used in the performance of work. Organize and keep adequate stock inventory of commonly used supplies and materials, in the storerooms and in the assigned vehicle. Assist other MEP (Electrical and Plumbing) shops by performing needed repairs and maintenance work such as: replacing and re-lamping lighting fixtures and ballasts, installing new electrical circuits, replacing plumbing fixtures, performing valve maintenance, testing & refueling emergency generators, and assisting in fire alarm testing, and perform other related duties as assigned by the shop supervisors. May also be assigned to work with other trade shops to accomplish multi-trade work orders and/or to assist with a variety of miscellaneous maintenance and repair work at the semi-skilled level, including strenuous manual labor. Hand excavates to locate utilities, trench for utilities, perform concrete work, and make minor asphalt repairs. Clean, maintain and make minor repairs to roofs, rain gutters and roof drain systems. Assist in flood control by setting up barricades and providing sandbags. Clean pools, fountains, and storm drains. Place signs, street signs and banners. Install and repair fencing, and move furniture, equipment, and heavy objects. Install earthquake safety preparation anchor fixtures. Install bulletin boards, black and white boards, name plates, and other items. Assemble and make minor repairs to furniture, lay carpet and floor tile, install ceiling tiles, hang doors & frames, clean up liquid spills, and remove hazardous materials. May assist the Lock Shop with rekeying locksets and cutting new keys. May operate forklifts, bobcats, manlift and other related equipment required to accomplish maintenance and repair work. QUALIFICATIONS: High school diploma or equivalent Valid California driver’s license and proof of insurance Four (4) years of increasingly responsible experience leading to journey-level skills in a mechanical or facilities/building trade, or any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Knowledge : Work requires thorough knowledge of the methods, materials, equipment and tools used in one skilled trade area; working knowledge of materials, methods, equipment and tools in related trade areas pertaining to facilities, systems, construction and renovation; thorough knowledge of generally accepted trade practices in trade specialty; working knowledge of computerized maintenance and building automation systems; working knowledge of applicable building and safety codes and regulations related to facilities, systems and renovations. Abilities : Must be able to demonstrate journey-level skill in one trade and strong skills in other applicable trades; operate construction and related equipment; use considerable judgment and discretion in performing duties; read, interpret and work from blueprints, plans, drawings, and specifications; make rough sketches; estimate cost, time and materials of maintenance, repair and renovation work; maintain records and retrieve data related to work performed using manual and/or computerized record-keeping systems; prepare standard reports; provide instruction to unskilled and semi-skilled assistants; analyze and respond to emergency situations; read and write at a level appropriate to the position; and perform arithmetic calculations as required by the position. PREFERRED EXPERIENCE: Operate a bobcat, backhoe; experience in welding, MIG, TIG, Arch and gas and soldering. Ability to perform semi-skill work of electrical, plumbing, locksmith, carpenter, painter and other general maintenance trades. Out of State Work The California State University (CSU) system is a network of twenty-three public universities providing access to a quality education through the support of California taxpayers. Part of CSU’s mission is to prepare educated, responsible individuals to contribute to California’s schools, economy, culture, and future. As an agency of the State of California, the CSU’s business operations almost exclusively reside within California. The CSU Out-of-State Employment Policy prohibits hiring employees to perform CSU-related work outside California. For more information, go to https://calstate.policystat.com/policy/10899725/latest/ . Background Check Cal Poly Pomona will make a conditional offer of employment to final job candidates, pending the satisfactory completion of a background check (including a criminal records check). The conditional offer of employment may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. In determining the suitability of the candidate for the position, Cal Poly Pomona will give an individualized assessment to any information that the applicant submits for consideration regarding the criminal conviction history such as the nature, gravity and recency of the conviction, the candidate’s conduct, performance or rehabilitation efforts since the conviction and the nature of the job applied for. For more information, go to https://calstate.policystat.com/policy/13813878/latest/ . CSU Classification Salary Range This position is part of the Teamsters Local 2010 bargaining unit 6. The CSU Classification Standards for this position are located on the following site: https://www.calstate.edu/csu-system/careers/compensation/Pages/Classification-Standards.aspx . The CSU Salary Schedule is located on the following site: https://www.calstate.edu/csu-system/careers/compensation/Pages/salary-schedule-documents.aspx . The classification salary range for this position according to the respective skill level is: minimum $5,787 and maximum $7,396 per month. Please refer to the anticipated hiring range for the appropriate salary rate for this particular position. Employment Eligibility Verification Cal Poly Pomona hires only individuals lawfully authorized to work in the United States. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. For more information, go to https://www.uscis.gov/i-9-central/form-i-9-acceptable-documents Child Abuse/Neglect Reporting Act (CANRA) The person holding this position is considered a “mandated reporter” under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. See policy at https://calstate.policystat.com/v2/policy/10927154/latest/ . Security & Fire Safety In compliance with state and federal crime awareness and campus security legislation, including The Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act, California Education Code section 67380, and the Higher Education Opportunity Act (HEOA), Cal Poly Pomona’s Annual Security Report and Annual Fire Safety Report are available for viewing at: https://www.cpp.edu/pdfs/annual_security_report.pdf and https://www.cpp.edu/housing/documents/fire_safety_report.pdf. Pay Transparency Nondiscrimination As a federal contractor, Cal Poly Pomona will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. For more information, see the Pay Transparency Nondiscrimination Provision poster . Reasonable Accommodation We provide reasonable accommodations to applicants and employees with disabilities. Applicants with questions about access or requiring a reasonable accommodation for any part of the application or hiring process should contact the ADA Coordinator by email at ADACoordinator@cpp.edu . For more information, go to Employment Notices . Equal Employment Opportunity Cal Poly Pomona is an Equal Opportunity Employer, committed to promoting an inclusive and diverse workforce. The university subscribes to all state and federal regulations that prohibit discrimination based on race, color, religion, national origin, sex, gender identity/gender expression, sexual orientation, marital status, pregnancy, age, disability, genetic information, medical condition, and veteran or military status. We engage the talents of all qualified workers, regardless of their background. More information is available at Equal Employment Opportunity statement . Other Notices For other important employment notices, we invite you to visit Cal Poly Pomona’s Employment Notices web page. Advertised: May 08 2024 Pacific Daylight Time Applications close: May 22 2024 Pacific Daylight Time Closing Date/Time:
May 09, 2024
Type of Appointment : Full-Time, Probationary Job Classification : Facilities Maintenance Mechanic Anticipated Hiring Amount : $5,787 per month ($69,444 annually) Work Hours : Monday - Friday, 8am - 5pm, unless otherwise notified Recruitment Closing Date : May 22, 2024 THE DEPARTMENT: Facilities Planning and Management (FP&M) serves as the lead organization for planning, developing, and maintaining the campus ‘natural and built environments in support of the university’s mission. The department seeks to preserve and enhance CPP’s history, aesthetics, physical assets, and natural ecosystems through coordinated planning, design, and construction of buildings, roads, infrastructure, landscaping and other physical improvements. As an advocate on behalf of the university and its auxiliaries, FPM strives to provide facilities that meet scope, budget, operational needs and functional requirements. FPM is comprised of approximately 200 facilities professionals (FTE) that also provides maintenance services including custodial services, landscaping, recycling, building and mechanical trades, energy and utility management, and auto fleet services. The workforce is culturally diverse and multilingual. Its composition includes full time staff throughout FPM who are also earning their degrees and many whom have graduated from Cal Poly Pomona. The staff includes licensed architects and engineers, accountants, planners, project managers, administrative staff, carpenters, plumbers, locksmiths, painters, electricians, landscapers, computer technicians, custodians and other building and mechanical trade technicians. DUTIES AND RESPONSIBILITIES: Working in a team environment, under the general supervision of the Manager of MEP Services and the Supervising and/or Lead Building Service Engineer and primarily responsible for the following: Responsible to perform general routine and preventative maintenance and repairs of the buildings’ mechanical equipment and associated apparatus including work on the utility infrastructure. Perform corrective and preventive maintenance on pumps, pump seals, pump bearings, motors, motor bearings and blower fan bearings, shaft alignments and air compressors. May work in a team or independently, to clean pools & decorative fountains, clean equipment rooms, collect utility meter readings, and perform other related duties as assigned by the shop supervisor and/or lead. Works with journeymen Building Service Engineers on inspecting, troubleshooting, diagnosing and performing preventative maintenance and complex repairs on stationary HVAC equipment such as boilers, chillers, ventilation systems, fans, motors, compressors, condensers, cooling towers, pumps, water treatment systems, and all other associated equipment related to HVAC systems. Incumbent must learn to safely troubleshoot and repair mechanical equipment and apparatus using various test instruments. Learn and expand knowledge on maintaining HVAC controls systems, and other building automation systems such as integrated lighting controls. Incumbent would perform daily assigned work orders and respond to periodic service calls from faculties and staff for hot and cold discomfort calls, report of strange smells, noises, and water leaks, and making minor adjustments and repairs to the mechanical systems to improve occupancy comforts, while providing quality customer service. Perform administrative duties and attend training related to the position. Using the TMA system incumbent is required to routinely and timely enter material and labor hours expended and technician notes related to execution of work orders. Provide material lists and/or estimated labor hours needed to perform specific task or assignments. Attend training classes related to the positions and for professional development to expand mechanical knowledge and skillsets. Maintains a safe, clean and organized work environment that would include the mechanical rooms, trades shops, and assigned service vehicles, tools and equipment used in the performance of work. Organize and keep adequate stock inventory of commonly used supplies and materials, in the storerooms and in the assigned vehicle. Assist other MEP (Electrical and Plumbing) shops by performing needed repairs and maintenance work such as: replacing and re-lamping lighting fixtures and ballasts, installing new electrical circuits, replacing plumbing fixtures, performing valve maintenance, testing & refueling emergency generators, and assisting in fire alarm testing, and perform other related duties as assigned by the shop supervisors. May also be assigned to work with other trade shops to accomplish multi-trade work orders and/or to assist with a variety of miscellaneous maintenance and repair work at the semi-skilled level, including strenuous manual labor. Hand excavates to locate utilities, trench for utilities, perform concrete work, and make minor asphalt repairs. Clean, maintain and make minor repairs to roofs, rain gutters and roof drain systems. Assist in flood control by setting up barricades and providing sandbags. Clean pools, fountains, and storm drains. Place signs, street signs and banners. Install and repair fencing, and move furniture, equipment, and heavy objects. Install earthquake safety preparation anchor fixtures. Install bulletin boards, black and white boards, name plates, and other items. Assemble and make minor repairs to furniture, lay carpet and floor tile, install ceiling tiles, hang doors & frames, clean up liquid spills, and remove hazardous materials. May assist the Lock Shop with rekeying locksets and cutting new keys. May operate forklifts, bobcats, manlift and other related equipment required to accomplish maintenance and repair work. QUALIFICATIONS: High school diploma or equivalent Valid California driver’s license and proof of insurance Four (4) years of increasingly responsible experience leading to journey-level skills in a mechanical or facilities/building trade, or any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Knowledge : Work requires thorough knowledge of the methods, materials, equipment and tools used in one skilled trade area; working knowledge of materials, methods, equipment and tools in related trade areas pertaining to facilities, systems, construction and renovation; thorough knowledge of generally accepted trade practices in trade specialty; working knowledge of computerized maintenance and building automation systems; working knowledge of applicable building and safety codes and regulations related to facilities, systems and renovations. Abilities : Must be able to demonstrate journey-level skill in one trade and strong skills in other applicable trades; operate construction and related equipment; use considerable judgment and discretion in performing duties; read, interpret and work from blueprints, plans, drawings, and specifications; make rough sketches; estimate cost, time and materials of maintenance, repair and renovation work; maintain records and retrieve data related to work performed using manual and/or computerized record-keeping systems; prepare standard reports; provide instruction to unskilled and semi-skilled assistants; analyze and respond to emergency situations; read and write at a level appropriate to the position; and perform arithmetic calculations as required by the position. PREFERRED EXPERIENCE: Operate a bobcat, backhoe; experience in welding, MIG, TIG, Arch and gas and soldering. Ability to perform semi-skill work of electrical, plumbing, locksmith, carpenter, painter and other general maintenance trades. Out of State Work The California State University (CSU) system is a network of twenty-three public universities providing access to a quality education through the support of California taxpayers. Part of CSU’s mission is to prepare educated, responsible individuals to contribute to California’s schools, economy, culture, and future. As an agency of the State of California, the CSU’s business operations almost exclusively reside within California. The CSU Out-of-State Employment Policy prohibits hiring employees to perform CSU-related work outside California. For more information, go to https://calstate.policystat.com/policy/10899725/latest/ . Background Check Cal Poly Pomona will make a conditional offer of employment to final job candidates, pending the satisfactory completion of a background check (including a criminal records check). The conditional offer of employment may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. In determining the suitability of the candidate for the position, Cal Poly Pomona will give an individualized assessment to any information that the applicant submits for consideration regarding the criminal conviction history such as the nature, gravity and recency of the conviction, the candidate’s conduct, performance or rehabilitation efforts since the conviction and the nature of the job applied for. For more information, go to https://calstate.policystat.com/policy/13813878/latest/ . CSU Classification Salary Range This position is part of the Teamsters Local 2010 bargaining unit 6. The CSU Classification Standards for this position are located on the following site: https://www.calstate.edu/csu-system/careers/compensation/Pages/Classification-Standards.aspx . The CSU Salary Schedule is located on the following site: https://www.calstate.edu/csu-system/careers/compensation/Pages/salary-schedule-documents.aspx . The classification salary range for this position according to the respective skill level is: minimum $5,787 and maximum $7,396 per month. Please refer to the anticipated hiring range for the appropriate salary rate for this particular position. Employment Eligibility Verification Cal Poly Pomona hires only individuals lawfully authorized to work in the United States. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. For more information, go to https://www.uscis.gov/i-9-central/form-i-9-acceptable-documents Child Abuse/Neglect Reporting Act (CANRA) The person holding this position is considered a “mandated reporter” under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. See policy at https://calstate.policystat.com/v2/policy/10927154/latest/ . Security & Fire Safety In compliance with state and federal crime awareness and campus security legislation, including The Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act, California Education Code section 67380, and the Higher Education Opportunity Act (HEOA), Cal Poly Pomona’s Annual Security Report and Annual Fire Safety Report are available for viewing at: https://www.cpp.edu/pdfs/annual_security_report.pdf and https://www.cpp.edu/housing/documents/fire_safety_report.pdf. Pay Transparency Nondiscrimination As a federal contractor, Cal Poly Pomona will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. For more information, see the Pay Transparency Nondiscrimination Provision poster . Reasonable Accommodation We provide reasonable accommodations to applicants and employees with disabilities. Applicants with questions about access or requiring a reasonable accommodation for any part of the application or hiring process should contact the ADA Coordinator by email at ADACoordinator@cpp.edu . For more information, go to Employment Notices . Equal Employment Opportunity Cal Poly Pomona is an Equal Opportunity Employer, committed to promoting an inclusive and diverse workforce. The university subscribes to all state and federal regulations that prohibit discrimination based on race, color, religion, national origin, sex, gender identity/gender expression, sexual orientation, marital status, pregnancy, age, disability, genetic information, medical condition, and veteran or military status. We engage the talents of all qualified workers, regardless of their background. More information is available at Equal Employment Opportunity statement . Other Notices For other important employment notices, we invite you to visit Cal Poly Pomona’s Employment Notices web page. Advertised: May 08 2024 Pacific Daylight Time Applications close: May 22 2024 Pacific Daylight Time Closing Date/Time:
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
Posting Open Until Filled Salary Range: $35,350 - $44,241 GENERAL DESCRIPTION AND CLASSIFIACTION STANDARDS Maintains assigned City of Atlanta facilities to maximize operational performance and reduce equipment operating costs. Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility. On call for after-hour facility emergencies. SUPERVISION RECEIVED Works under the direction of the Facilities Maintenance Supervisor. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned facility tasks. ESSENTIAL DUTIES & RESPONSIBILITIES Performs scheduled preventive, predictive, corrective and reactive maintenance on facility assets as assigned. Leads continuous improvement activities. Participates in Root-Cause Analysis activities. Utilizes Computerized Maintenance Management System (CMMS) to document work orders and maintain work history. Performs general repairs and maintenance not limited to: Repairs or adjusts doors, carpentry, painting, replacing light bulbs or fixtures, repairs to plumbing/pipes/sinks, and HVAC. Organizes daily work routine; establishes priorities for the completion of work in accordance with facility needs. Utilizes experience to lead in developing standards/work procedures while performing those duties and provides work order feedback on discrepancies as noted during service delivery. Uses a variety of hand-powered and shop tools. Complies with safety regulations and maintains clean and orderly work areas. Helps and trains new personnel on equipment operation. Performs all duties with a strong and diligent focus on safety and quality. Responds to customer requests and complaints in a timely and appropriate manner; identifies and records needs or problems and determines best approach to resolve situation following departmental guidelines. Responds to emergency situations during and after hours for the purpose of resolving immediate safety/operational concerns. Participates in meetings, workshops, training, and seminars, as assigned for the purpose of conveying and/or gathering information required to perform job functions. MINIMUNM QUALIFICATIONS A high school diploma Five plus (5+) years of experience in building repairs and maintenance. Trade proficiency in basic plumbing, simple electrical, carpentry, drywall, tile, flooring, painting, miscellaneous repairs and maintenance. Must have a valid Georgia Driver's license PREFERRED QUALIFICATIONS Building Operators Certification (BOC) Building Owners and Managers Association (BOMA) Certification International Facility Management Association (IFMA) Certification HVAC Certification PHYSICAL REQUIREMENTS Frequent standing & walking; occasional sitting; Physical demands may vary depending on assigned work area and work tasks. Carrying of objects up to 35 lbs; The ability to lift 50 pounds and bending, k neeling, stooping, and twisting, is frequently required.
May 17, 2024
Full Time
Posting Open Until Filled Salary Range: $35,350 - $44,241 GENERAL DESCRIPTION AND CLASSIFIACTION STANDARDS Maintains assigned City of Atlanta facilities to maximize operational performance and reduce equipment operating costs. Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility. On call for after-hour facility emergencies. SUPERVISION RECEIVED Works under the direction of the Facilities Maintenance Supervisor. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned facility tasks. ESSENTIAL DUTIES & RESPONSIBILITIES Performs scheduled preventive, predictive, corrective and reactive maintenance on facility assets as assigned. Leads continuous improvement activities. Participates in Root-Cause Analysis activities. Utilizes Computerized Maintenance Management System (CMMS) to document work orders and maintain work history. Performs general repairs and maintenance not limited to: Repairs or adjusts doors, carpentry, painting, replacing light bulbs or fixtures, repairs to plumbing/pipes/sinks, and HVAC. Organizes daily work routine; establishes priorities for the completion of work in accordance with facility needs. Utilizes experience to lead in developing standards/work procedures while performing those duties and provides work order feedback on discrepancies as noted during service delivery. Uses a variety of hand-powered and shop tools. Complies with safety regulations and maintains clean and orderly work areas. Helps and trains new personnel on equipment operation. Performs all duties with a strong and diligent focus on safety and quality. Responds to customer requests and complaints in a timely and appropriate manner; identifies and records needs or problems and determines best approach to resolve situation following departmental guidelines. Responds to emergency situations during and after hours for the purpose of resolving immediate safety/operational concerns. Participates in meetings, workshops, training, and seminars, as assigned for the purpose of conveying and/or gathering information required to perform job functions. MINIMUNM QUALIFICATIONS A high school diploma Five plus (5+) years of experience in building repairs and maintenance. Trade proficiency in basic plumbing, simple electrical, carpentry, drywall, tile, flooring, painting, miscellaneous repairs and maintenance. Must have a valid Georgia Driver's license PREFERRED QUALIFICATIONS Building Operators Certification (BOC) Building Owners and Managers Association (BOMA) Certification International Facility Management Association (IFMA) Certification HVAC Certification PHYSICAL REQUIREMENTS Frequent standing & walking; occasional sitting; Physical demands may vary depending on assigned work area and work tasks. Carrying of objects up to 35 lbs; The ability to lift 50 pounds and bending, k neeling, stooping, and twisting, is frequently required.
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $17.97/hour The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. General Description and Classification Standards Participates in more complex and difficult work Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties and Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, HVAC, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventory levels of tools and materials orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Planning and Organizing Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Equipment use and Maintenance Operates and maintains equipment, machinery and tools related to construction and maintenance projects which includes an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, as applicable. Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Marginal Job Functions Performs other related duties as required. Typical Qualifications: High school diploma or GED required Valid Georgia Driver’s License required One year (1) of experience in construction, carpentry, building trades; such as HVAC, plumbing, welding or electrical. Preferred Qualifications: A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
Mar 08, 2024
Full Time
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $17.97/hour The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. General Description and Classification Standards Participates in more complex and difficult work Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties and Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, HVAC, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventory levels of tools and materials orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Planning and Organizing Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Equipment use and Maintenance Operates and maintains equipment, machinery and tools related to construction and maintenance projects which includes an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, as applicable. Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Marginal Job Functions Performs other related duties as required. Typical Qualifications: High school diploma or GED required Valid Georgia Driver’s License required One year (1) of experience in construction, carpentry, building trades; such as HVAC, plumbing, welding or electrical. Preferred Qualifications: A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $18.23/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications: High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred. A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
Mar 08, 2024
Full Time
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $18.23/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications: High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred. A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $18.23/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications: High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
Mar 08, 2024
Full Time
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $18.23/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications: High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
Posting Open Until Filled Salary Range: $33,422 - $40,760 GENERAL DESCRIPTION AND CLASSIFICATION STANDARDS Under general supervision, performs a variety of routine semi-skilled maintenance for facilities; ensures that facilities are available for use and consistently maintained in a safe and clean condition. Areas of responsibility include, but are not limited to, carpentry, painting, plumbing, and electrical trades work. Operates a variety of maintenance and cleaning tools and equipment; and performs related work as required. SUPERVISION RECEIVED Works under the direction of the Facilities Maintenance Supervisor. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. ESSENTIAL DUTIES & RESPONSIBILITIES Performs general maintenance, repair, and installation tasks such as installing/repairing doors, changing light bulbs, locks, fences, basic plumbing duties, changing plumbing fixtures; repairing gutters/down spouts and roof leaks; assembling furniture or equipment; hanging pictures, blinds, event setups/breakdown, and moving furniture. Performs exterior facility grounds/landscaping tasks, exterior facility pressure washing. Provides assistance to other positions as needed. Communicates effectively with co-workers and other employees concerning work orders, problems, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Plans and organizes daily work orders; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments with the ability to prioritize accordingly. Plans and prepares for special projects on a monthly basis. Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. Performs other related duties as required. MINIMUM QUALIFICATIONS - Education and Experience High school diploma or GED required Three (3) years of building repairs and maintenance, carpentry, or t rade proficiency in basic plumbing, simple electrical, carpentry, drywall, tile, flooring, and painting. PREFERRED QUALIFICATIONs - Education and Experience Building Operators Certification (BOC) Building Owners and Managers Association (BOMA) Certification International Facility Management Association (IFMA) Certification HVAC Certification CERTIFICATIONS AND LICENSURE Valid Georgia Driver’s License. PHYSICAL REQUIREMENTS Frequent standing & walking; occasional sitting; Physical demands may vary depending on assigned work area and work tasks. Carrying of objects up to 50 lbs; The ability to lift 50 pounds and bending, k neeling, stooping, and twisting, is frequently required.
May 17, 2024
Full Time
Posting Open Until Filled Salary Range: $33,422 - $40,760 GENERAL DESCRIPTION AND CLASSIFICATION STANDARDS Under general supervision, performs a variety of routine semi-skilled maintenance for facilities; ensures that facilities are available for use and consistently maintained in a safe and clean condition. Areas of responsibility include, but are not limited to, carpentry, painting, plumbing, and electrical trades work. Operates a variety of maintenance and cleaning tools and equipment; and performs related work as required. SUPERVISION RECEIVED Works under the direction of the Facilities Maintenance Supervisor. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. ESSENTIAL DUTIES & RESPONSIBILITIES Performs general maintenance, repair, and installation tasks such as installing/repairing doors, changing light bulbs, locks, fences, basic plumbing duties, changing plumbing fixtures; repairing gutters/down spouts and roof leaks; assembling furniture or equipment; hanging pictures, blinds, event setups/breakdown, and moving furniture. Performs exterior facility grounds/landscaping tasks, exterior facility pressure washing. Provides assistance to other positions as needed. Communicates effectively with co-workers and other employees concerning work orders, problems, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Plans and organizes daily work orders; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments with the ability to prioritize accordingly. Plans and prepares for special projects on a monthly basis. Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. Performs other related duties as required. MINIMUM QUALIFICATIONS - Education and Experience High school diploma or GED required Three (3) years of building repairs and maintenance, carpentry, or t rade proficiency in basic plumbing, simple electrical, carpentry, drywall, tile, flooring, and painting. PREFERRED QUALIFICATIONs - Education and Experience Building Operators Certification (BOC) Building Owners and Managers Association (BOMA) Certification International Facility Management Association (IFMA) Certification HVAC Certification CERTIFICATIONS AND LICENSURE Valid Georgia Driver’s License. PHYSICAL REQUIREMENTS Frequent standing & walking; occasional sitting; Physical demands may vary depending on assigned work area and work tasks. Carrying of objects up to 50 lbs; The ability to lift 50 pounds and bending, k neeling, stooping, and twisting, is frequently required.
New York State Office of Parks, Recreation & Historic Preservation
New York, New York, United States
Minimum Qualifications One year of trade experience subsequent to the completion of an apprenticeship or equivalent training and experience such as that required for a Trades Specialist (Carpenter), Trades Specialist (Electrician), Service & Repair Mechanic (Electronics), Trades Generalist, Grounds Construction Supervisor, Trades Specialist (Locksmith), Trades Specialist (Machinist), Trades Specialist (Mason and Plasterer), Service and Repair Mechanic (Motor Equipment), Trades Specialist (Painter), Trades Specialist (Plumber & Steamfitter), Service and Repair Mechanic (HVAC-R), Trades Specialist (Roofing), or Trades Specialist (Welder). Duties Description Under the supervision of higher-level managers and the Park Administrative team, the Maintenance Supervisor 1 supervises programs and operations within Denny Farrell Riverbank State Park in the Maintenance Department. The incumbent will be a working supervisor involved in all aspects of maintaining and repairing park buildings, utility systems and grounds. Typical assignments include but are not limited to: • Supervises and coordinates the activities of a variety of permanent and seasonal skilled, semi-skilled, and unskilled staff engaging in a broad range of park maintenance and repair work, which may include skilled trades work, as well as housekeeping and groundskeeping functions at Denny Farrell Riverbank State Park or the filter plant within the park. • Plans and lays out work, assigns staff, provides instruction and assistance, coordinates among work teams, actively supervises and inspects work in progress and upon completion. • Prepares written reports in response to specific assignments, work orders and other assignments as needed. • Leads the staff by emphasizing health and safety guidelines, modeling and enforcing all Agency policies, providing training and orientation of new staff, and formally evaluating the performance of all staff under their supervision. • Coordinates with higher level management staff as directed to assure that priority needs for maintenance and repair are promptly identified and addressed in a manner which avoids disruption of park operations to the greatest extent feasible. • Determines needs for purchasing materials, equipment, and supplementary contractor services for required maintenance and repair of buildings, mechanical systems, fixed equipment, and grounds. • Completes necessary purchasing requests and prepares and/or compiles any required supporting documentation. • Evaluates park facilities for energy conservation and sustainability of operations. • Sets standards and assigns tasks based on the daily operational needs of the park. • May also serve as shift supervisor in another complex by supervising programs and operations as needed. • Carries out other related duties and responsibilities as assigned. Additional Comments OPERATING NEEDS: • Must possess and maintain a valid driver’s license that allows the candidate to legally operate a motor vehicle in New York State as a term and condition of employment. • This position is 40 hours per week. Evening, weekend, and holiday work is required. • Must be well versed in local building codes, reading diagrams, and understanding building plans as well as performing grounds maintenance. • Must be well organized and have excellent oral and written communication skills. • Must be proficient in Microsoft Word, Excel, and Outlook. • Bilingual candidates are encouraged to apply. • May be required to report to other facilities throughout the New York City region on an as-needed basis. DOWNSTATE ADJUSTMENT: $3,400 BENEFITS: This position has the option to join the NYS Employee’s Retirement System and is eligible for health insurance, dental and vision coverage. There is opportunity for paid time off in the form of vacation, sick, personal and holiday leave after time & service requirements has been met. Generous benefits package, worth approximately 65% of salary, including: • Paid Time Off: o PEF and CSEA: 44 days - 13 Vacation days, 13 Sick days, and 5 Personal Leave days, 13 Holidays. o M/C: 39 days - 13 Vacation days, 8 Sick days, and 5 Personal Leave days, 13 Holidays. o PEF and M/C: Three (3) days of professional leave annually to participate in professional development. • Health Care Benefits: o Eligible employees and dependents can pick from a variety of affordable health insurance programs. o Family dental and vision benefits at no additional cost • Additional Benefits: o New York State Employees’ Retirement System (ERS) Membership o NYS Deferred Compensation o Access to NY 529 and NY ABLE College Savings Programs, as well as U.S. Savings Bonds o Public Service Loan Forgiveness (PSLF) o Paid Parental / Family Leave To learn more about our benefits, visit: https://parks.ny.gov/employment/benefits.aspx Some positions may require additional credentials or a background check to verify your identity. Closing Date/Time: 05/21/24
May 07, 2024
Full Time
Minimum Qualifications One year of trade experience subsequent to the completion of an apprenticeship or equivalent training and experience such as that required for a Trades Specialist (Carpenter), Trades Specialist (Electrician), Service & Repair Mechanic (Electronics), Trades Generalist, Grounds Construction Supervisor, Trades Specialist (Locksmith), Trades Specialist (Machinist), Trades Specialist (Mason and Plasterer), Service and Repair Mechanic (Motor Equipment), Trades Specialist (Painter), Trades Specialist (Plumber & Steamfitter), Service and Repair Mechanic (HVAC-R), Trades Specialist (Roofing), or Trades Specialist (Welder). Duties Description Under the supervision of higher-level managers and the Park Administrative team, the Maintenance Supervisor 1 supervises programs and operations within Denny Farrell Riverbank State Park in the Maintenance Department. The incumbent will be a working supervisor involved in all aspects of maintaining and repairing park buildings, utility systems and grounds. Typical assignments include but are not limited to: • Supervises and coordinates the activities of a variety of permanent and seasonal skilled, semi-skilled, and unskilled staff engaging in a broad range of park maintenance and repair work, which may include skilled trades work, as well as housekeeping and groundskeeping functions at Denny Farrell Riverbank State Park or the filter plant within the park. • Plans and lays out work, assigns staff, provides instruction and assistance, coordinates among work teams, actively supervises and inspects work in progress and upon completion. • Prepares written reports in response to specific assignments, work orders and other assignments as needed. • Leads the staff by emphasizing health and safety guidelines, modeling and enforcing all Agency policies, providing training and orientation of new staff, and formally evaluating the performance of all staff under their supervision. • Coordinates with higher level management staff as directed to assure that priority needs for maintenance and repair are promptly identified and addressed in a manner which avoids disruption of park operations to the greatest extent feasible. • Determines needs for purchasing materials, equipment, and supplementary contractor services for required maintenance and repair of buildings, mechanical systems, fixed equipment, and grounds. • Completes necessary purchasing requests and prepares and/or compiles any required supporting documentation. • Evaluates park facilities for energy conservation and sustainability of operations. • Sets standards and assigns tasks based on the daily operational needs of the park. • May also serve as shift supervisor in another complex by supervising programs and operations as needed. • Carries out other related duties and responsibilities as assigned. Additional Comments OPERATING NEEDS: • Must possess and maintain a valid driver’s license that allows the candidate to legally operate a motor vehicle in New York State as a term and condition of employment. • This position is 40 hours per week. Evening, weekend, and holiday work is required. • Must be well versed in local building codes, reading diagrams, and understanding building plans as well as performing grounds maintenance. • Must be well organized and have excellent oral and written communication skills. • Must be proficient in Microsoft Word, Excel, and Outlook. • Bilingual candidates are encouraged to apply. • May be required to report to other facilities throughout the New York City region on an as-needed basis. DOWNSTATE ADJUSTMENT: $3,400 BENEFITS: This position has the option to join the NYS Employee’s Retirement System and is eligible for health insurance, dental and vision coverage. There is opportunity for paid time off in the form of vacation, sick, personal and holiday leave after time & service requirements has been met. Generous benefits package, worth approximately 65% of salary, including: • Paid Time Off: o PEF and CSEA: 44 days - 13 Vacation days, 13 Sick days, and 5 Personal Leave days, 13 Holidays. o M/C: 39 days - 13 Vacation days, 8 Sick days, and 5 Personal Leave days, 13 Holidays. o PEF and M/C: Three (3) days of professional leave annually to participate in professional development. • Health Care Benefits: o Eligible employees and dependents can pick from a variety of affordable health insurance programs. o Family dental and vision benefits at no additional cost • Additional Benefits: o New York State Employees’ Retirement System (ERS) Membership o NYS Deferred Compensation o Access to NY 529 and NY ABLE College Savings Programs, as well as U.S. Savings Bonds o Public Service Loan Forgiveness (PSLF) o Paid Parental / Family Leave To learn more about our benefits, visit: https://parks.ny.gov/employment/benefits.aspx Some positions may require additional credentials or a background check to verify your identity. Closing Date/Time: 05/21/24
TEXAS PARKS AND WILDLIFE
Austin, Texas, United States
TPWD MISSION To manage and conserve the natural and cultural resources of Texas and to provide hunting, fishing and outdoor recreation opportunities for the use and enjoyment of present and future generations. PLEASE NOTE: All applications must contain complete job histories, which includes job title, dates of employment (month/year) and hours worked per week, name of employer, supervisor's name and phone number and a description of duties performed. Job history and volunteer experience should be listed in the work history section of the application to receive credit towards meeting the minimum requirements. Part-time experience credit is prorated based on the duration and hours worked per week. Please indicate hours worked for part-time/temporary/seasonal experience. If this information is not submitted, your application will be considered incomplete. Applications with "See attached" or "See resume" will not be accepted in lieu of a completed application. Omission of data can be the basis for disqualification; you may state 'unknown' for any incomplete fields. If education is used to meet the minimum requirements of the job posting, a copy of a college transcript(s) issued from the registrar must be provided if you are selected for an interview. WATCH OUR VIDEO ON HOW TO APPLY FOR JOBS APPLICATIONS SUBMITTED THROUGH WORK IN TEXAS: Work In Texas (WIT) applicants must complete the supplemental questions to be considered for the posting. To complete the supplemental questions, go to CAPPS Recruit to register or login. CAPPS Recruit, https://capps.taleo.net/careersection/ex/jobsearch.ftl?lang=en MILITARY OCCUPATIONAL SPECIALTY CODES: Job Classification Service Military Specialty HVAC Mechanic I - III Army 91C HVAC Mechanic I - III Navy EN, MM, UT HVAC Mechanic I - III Coast Guard MK HVAC Mechanic I - III Marine Corps 1161, 6073, 6499 HVAC Mechanic I - III Air Force 3E1X1 *More information on military occupational specialty codes can be found below: https://www.onetonline.org/crosswalk/MOC/ https://hr.sao.texas.gov/Compensation/MilitaryCrosswalk/MilitaryCrosswalkGuide.pdf MILITARY EMPLOYMENT PREFERENCE: If you choose to claim military employment preference as outlined by the State of Texas, you must complete the Military Employment Preference Survey and attach this form and required documentation referenced on this form at the time your application is submitted . If you have questions regarding this requirement, please visit our Military Employment Reference page at https://tpwd.texas.gov/jobs/veterans/ Required forms that will need to be attached with application for Military Employment Preference: 1. Veteran- DD214 showing honorable discharge. 2. Surviving spouse of a veteran who has not remarried- Marriage Certificate and DD Form 1300 or appropriate documentation. 3. Orphan of a veteran killed while on active duty- Birth Certificate and DD Form 1300 or appropriate documentation. 4. Spouse of a member of the US Armed Forces/Texas National Guard serving on Active Duty- Marriage Certificate and copy of spouses active duty military orders. 5. Spouse of a veteran with disability and is the primary income for household- Marriage Certificate, Veterans DD214, and VA Benefits Summary Letter showing disability rating. Documentation must be attached to the application before military preference can be granted. BENEFITS: Texas Parks and Wildlife offers a variety of benefits for employees such as generous paid time off, group insurance, retirement and pension, and frequent training and staff development opportunities. Other benefits include longevity pay, merit pay, deferred compensation, flexible benefit plans, 401K/457 retirement plans, direct deposit, telework, staggered work hours, Employee Assistance Program and a Return to Work Program. For new employees or rehires, health insurance is available the 1st of the following month after a 60-day waiting period. Click HERE to view our Benefits page. HIRING CONTACT: Phillip Torres, (512) 389-8050 PHYSICAL WORK ADDRESS: TPWD Headquarters, 4200 Smith School Road, Austin, TX 78744 GENERAL DESCRIPTION Under the direction of the Facility Manager, this position performs advanced (senior level) heating, ventilation, and air conditioning (HVAC) mechanic work for equipment to ensure effective operation. Overhauls, services or oversees the overhauling and servicing of HVAC and mechanical equipment. Performs advanced HVAC mechanic work by assigning, scheduling, or overseeing the work of staff engaged in the maintenance and repair mechanical systems, HVAC equipment, high pressure power boilers, large centrifugal refrigeration chillers, screw chiller and components such as condensers, chillers, cooling towers, pumps, and valves. Air Quality and Control Administers and maintains HQ facilities HVAC equipment and controls. Makes technical / troubleshooting to building management systems. Recommends solutions to improve efficiency, improve air quality, and comfort within office environments. Building Management system administers computer HVAC and building management systems, maintaining system operation from facility and by remote. Monitors the operation of HVAC system's, making modifications and adjustments. Works under limited supervision, with moderate latitude for the use of initiative and independent judgment. Performs additional duties as assigned. Complies with all Agency, Division, and Branch rules, regulations, and procedures. Qualifications: MINIMUM QUALIFICATIONS: Education: Graduation from High School or GED. Experience: Three years' experience in maintaining, troubleshooting, repairing, contracting, and operating HVAC systems in a large commercial or industrial setting; Three years' experience using and operating Building Automated Controls; Three years' plumbing experience; Three years' commercial electrical experience. Licensure: Must possess EPA universal Certification; Must possess or be able to obtain, within 30 days of employment, a valid class "C" Texas driver's license. NOTE: Retention of position contingent upon obtaining and maintaining required licenses. ACCEPTABLE SUBSTITUTIONS: Experience: Completion of a 5-year apprenticeship program, including receipt of Journeyman certification, may substitute for three years commercial HVAC Mechanical experience. KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of commercial HVAC systems; Knowledge of electrical low voltage control circuits; Knowledge of energy efficiency in HVAC system operations; Knowledge of HVAC capital construction and improvement projects; Knowledge of preventative maintenance programs; Knowledge of single phase and three phase electrical commercial system; Knowledge of refrigeration systems (Ice Machines, Water fountains); Knowledge of Air Quality Control; Knowledge of Chiller systems; Knowledge of Boiler systems ; Skill in operating automated building controls associated with HVAC systems in a commercial building; Skill in maintaining, troubleshooting, and repairing commercial roof top units and split systems; Skill in wiring duct smoke detectors; Skill in operating and maintaining 300-ton chillers, cooling towers, and gas fired boilers; Skill in operating and maintaining pumps, motors, and automated controls; Skill in operating, calibrating, and replacing high and low voltage controls and other related control sensing instruments and equipment; Skill in using MS Word, Excel and Outlook; Skill in effective verbal and written communication; Skill in providing quality customer service in a courteous and professional manner; Skill in using digital test instruments required for maintenance and repair; Skill in low voltage (24V or 1 to 10V) associated with HVAC equipment, Air Handling equipment, and duct systems associated with HVAC equipment; Skill in commercial electrical systems; Skill in maintaining, diagnose, and repair of refrigeration equipment. (Ice Machines, Water Fountains); Ability to read and comprehend blueprints, write job specifications and service agreements, project cost analysis, project management of service, construction, repair and maintenance jobs; Ability to replace and repair major components of AC and heating systems; Ability to coordinate contract repairs and manage contract service maintenance work for HVAC systems; Ability to inspect HVAC service and repairs contracts and contractors; Ability to maintain status and service records on specified equipment and compose memos and reports; Ability to interpret and work from blueprints and specifications on HVAC projects and equipment; Ability to lead and delegate a work group in repair and installation projects; Ability to perform frequent, proactive evaluation and resolution of facility air comfort and quality problems; Ability to implement new approaches in solving problems, following up and communicating with employees during and after modification; Ability to operate, maintain and train staff in HVAC and building management computer control systems, research and implement enhancements; Ability to compose reports and correspondence; Ability to work independently with little or no supervision; Ability to perform work at high altitudes; Ability to perform manual labor including, lifting supplies and materials up to 100 lbs.; Ability to conduct work activities in accordance with TPWD safety program. WORKING CONDITIONS: Required to work from 8:00 a.m. to 5:00 p.m., Monday through Friday; Required to work on holidays, weekends and hours other than 8:00 a.m. to 5:00 p.m. as necessary; Required to work overtime as necessary; Required to respond to emergency and on call situations; Required to perform work at high altitudes; Required to perform work outdoors, occasionally in adverse weather conditions; Required to perform manual labor including, lifting supplies and materials up to 100 lbs.; Required to travel 10%; Required to operate a State vehicle; Must conform to TPWD dress and grooming standards, work rules and safety procedures; Non-smoking environment in State buildings and vehicles. TPWD IS AN EQUAL OPPORTUNITY EMPLOYER Closing Date: May 27, 2024, 11:59:00 PM
Apr 30, 2024
Full Time
TPWD MISSION To manage and conserve the natural and cultural resources of Texas and to provide hunting, fishing and outdoor recreation opportunities for the use and enjoyment of present and future generations. PLEASE NOTE: All applications must contain complete job histories, which includes job title, dates of employment (month/year) and hours worked per week, name of employer, supervisor's name and phone number and a description of duties performed. Job history and volunteer experience should be listed in the work history section of the application to receive credit towards meeting the minimum requirements. Part-time experience credit is prorated based on the duration and hours worked per week. Please indicate hours worked for part-time/temporary/seasonal experience. If this information is not submitted, your application will be considered incomplete. Applications with "See attached" or "See resume" will not be accepted in lieu of a completed application. Omission of data can be the basis for disqualification; you may state 'unknown' for any incomplete fields. If education is used to meet the minimum requirements of the job posting, a copy of a college transcript(s) issued from the registrar must be provided if you are selected for an interview. WATCH OUR VIDEO ON HOW TO APPLY FOR JOBS APPLICATIONS SUBMITTED THROUGH WORK IN TEXAS: Work In Texas (WIT) applicants must complete the supplemental questions to be considered for the posting. To complete the supplemental questions, go to CAPPS Recruit to register or login. CAPPS Recruit, https://capps.taleo.net/careersection/ex/jobsearch.ftl?lang=en MILITARY OCCUPATIONAL SPECIALTY CODES: Job Classification Service Military Specialty HVAC Mechanic I - III Army 91C HVAC Mechanic I - III Navy EN, MM, UT HVAC Mechanic I - III Coast Guard MK HVAC Mechanic I - III Marine Corps 1161, 6073, 6499 HVAC Mechanic I - III Air Force 3E1X1 *More information on military occupational specialty codes can be found below: https://www.onetonline.org/crosswalk/MOC/ https://hr.sao.texas.gov/Compensation/MilitaryCrosswalk/MilitaryCrosswalkGuide.pdf MILITARY EMPLOYMENT PREFERENCE: If you choose to claim military employment preference as outlined by the State of Texas, you must complete the Military Employment Preference Survey and attach this form and required documentation referenced on this form at the time your application is submitted . If you have questions regarding this requirement, please visit our Military Employment Reference page at https://tpwd.texas.gov/jobs/veterans/ Required forms that will need to be attached with application for Military Employment Preference: 1. Veteran- DD214 showing honorable discharge. 2. Surviving spouse of a veteran who has not remarried- Marriage Certificate and DD Form 1300 or appropriate documentation. 3. Orphan of a veteran killed while on active duty- Birth Certificate and DD Form 1300 or appropriate documentation. 4. Spouse of a member of the US Armed Forces/Texas National Guard serving on Active Duty- Marriage Certificate and copy of spouses active duty military orders. 5. Spouse of a veteran with disability and is the primary income for household- Marriage Certificate, Veterans DD214, and VA Benefits Summary Letter showing disability rating. Documentation must be attached to the application before military preference can be granted. BENEFITS: Texas Parks and Wildlife offers a variety of benefits for employees such as generous paid time off, group insurance, retirement and pension, and frequent training and staff development opportunities. Other benefits include longevity pay, merit pay, deferred compensation, flexible benefit plans, 401K/457 retirement plans, direct deposit, telework, staggered work hours, Employee Assistance Program and a Return to Work Program. For new employees or rehires, health insurance is available the 1st of the following month after a 60-day waiting period. Click HERE to view our Benefits page. HIRING CONTACT: Phillip Torres, (512) 389-8050 PHYSICAL WORK ADDRESS: TPWD Headquarters, 4200 Smith School Road, Austin, TX 78744 GENERAL DESCRIPTION Under the direction of the Facility Manager, this position performs advanced (senior level) heating, ventilation, and air conditioning (HVAC) mechanic work for equipment to ensure effective operation. Overhauls, services or oversees the overhauling and servicing of HVAC and mechanical equipment. Performs advanced HVAC mechanic work by assigning, scheduling, or overseeing the work of staff engaged in the maintenance and repair mechanical systems, HVAC equipment, high pressure power boilers, large centrifugal refrigeration chillers, screw chiller and components such as condensers, chillers, cooling towers, pumps, and valves. Air Quality and Control Administers and maintains HQ facilities HVAC equipment and controls. Makes technical / troubleshooting to building management systems. Recommends solutions to improve efficiency, improve air quality, and comfort within office environments. Building Management system administers computer HVAC and building management systems, maintaining system operation from facility and by remote. Monitors the operation of HVAC system's, making modifications and adjustments. Works under limited supervision, with moderate latitude for the use of initiative and independent judgment. Performs additional duties as assigned. Complies with all Agency, Division, and Branch rules, regulations, and procedures. Qualifications: MINIMUM QUALIFICATIONS: Education: Graduation from High School or GED. Experience: Three years' experience in maintaining, troubleshooting, repairing, contracting, and operating HVAC systems in a large commercial or industrial setting; Three years' experience using and operating Building Automated Controls; Three years' plumbing experience; Three years' commercial electrical experience. Licensure: Must possess EPA universal Certification; Must possess or be able to obtain, within 30 days of employment, a valid class "C" Texas driver's license. NOTE: Retention of position contingent upon obtaining and maintaining required licenses. ACCEPTABLE SUBSTITUTIONS: Experience: Completion of a 5-year apprenticeship program, including receipt of Journeyman certification, may substitute for three years commercial HVAC Mechanical experience. KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of commercial HVAC systems; Knowledge of electrical low voltage control circuits; Knowledge of energy efficiency in HVAC system operations; Knowledge of HVAC capital construction and improvement projects; Knowledge of preventative maintenance programs; Knowledge of single phase and three phase electrical commercial system; Knowledge of refrigeration systems (Ice Machines, Water fountains); Knowledge of Air Quality Control; Knowledge of Chiller systems; Knowledge of Boiler systems ; Skill in operating automated building controls associated with HVAC systems in a commercial building; Skill in maintaining, troubleshooting, and repairing commercial roof top units and split systems; Skill in wiring duct smoke detectors; Skill in operating and maintaining 300-ton chillers, cooling towers, and gas fired boilers; Skill in operating and maintaining pumps, motors, and automated controls; Skill in operating, calibrating, and replacing high and low voltage controls and other related control sensing instruments and equipment; Skill in using MS Word, Excel and Outlook; Skill in effective verbal and written communication; Skill in providing quality customer service in a courteous and professional manner; Skill in using digital test instruments required for maintenance and repair; Skill in low voltage (24V or 1 to 10V) associated with HVAC equipment, Air Handling equipment, and duct systems associated with HVAC equipment; Skill in commercial electrical systems; Skill in maintaining, diagnose, and repair of refrigeration equipment. (Ice Machines, Water Fountains); Ability to read and comprehend blueprints, write job specifications and service agreements, project cost analysis, project management of service, construction, repair and maintenance jobs; Ability to replace and repair major components of AC and heating systems; Ability to coordinate contract repairs and manage contract service maintenance work for HVAC systems; Ability to inspect HVAC service and repairs contracts and contractors; Ability to maintain status and service records on specified equipment and compose memos and reports; Ability to interpret and work from blueprints and specifications on HVAC projects and equipment; Ability to lead and delegate a work group in repair and installation projects; Ability to perform frequent, proactive evaluation and resolution of facility air comfort and quality problems; Ability to implement new approaches in solving problems, following up and communicating with employees during and after modification; Ability to operate, maintain and train staff in HVAC and building management computer control systems, research and implement enhancements; Ability to compose reports and correspondence; Ability to work independently with little or no supervision; Ability to perform work at high altitudes; Ability to perform manual labor including, lifting supplies and materials up to 100 lbs.; Ability to conduct work activities in accordance with TPWD safety program. WORKING CONDITIONS: Required to work from 8:00 a.m. to 5:00 p.m., Monday through Friday; Required to work on holidays, weekends and hours other than 8:00 a.m. to 5:00 p.m. as necessary; Required to work overtime as necessary; Required to respond to emergency and on call situations; Required to perform work at high altitudes; Required to perform work outdoors, occasionally in adverse weather conditions; Required to perform manual labor including, lifting supplies and materials up to 100 lbs.; Required to travel 10%; Required to operate a State vehicle; Must conform to TPWD dress and grooming standards, work rules and safety procedures; Non-smoking environment in State buildings and vehicles. TPWD IS AN EQUAL OPPORTUNITY EMPLOYER Closing Date: May 27, 2024, 11:59:00 PM
Contra Costa County, CA
Martinez, California, United States
The Position Contra Costa County’s Public Works Department is seeking qualified individuals to fill multiple Stationary Engineer (Building Maintenance Mechanic) vacancies. All interested and qualified individuals are encouraged to apply. The Public Works Department has an organizational culture that strives for continuous improvement. Our mission is to deliver cost effective, safe, reliable, and sustainable projects, programs, and quality services with a focus on our communities and provide support services that are competitive, attentive, responsive, efficient, and safe to enable the County Departments to provide high quality services to the public. Stationary Engineers operate, maintain, and repair HVAC systems in a variety of buildings throughout the County. Responsibilities include resolving customer complaints related to airflow, heating, cooling, and ventilation; responding to HVAC related alarms and elevator malfunctions; calibrating and maintaining pneumatic, electric, and computerized (DDC system) controls; inspecting chillers and ensuring containment and proper handling of refrigerants, which may contain chlorofluorocarbons and other hazardous materials; and other related work as required. The Public Works Department is currently recruiting to fill four (4) vacant positions for the Stationary Engineer classification. Employees may work in detention facilities and in close proximity to inmates and patients. We are looking for someone who is: Detail oriented . You can deliver measurable high-quality, timely, and cost-effective results. Safety oriented . You can adhere to all safety practices in the workplace A problem solver . You can adapt to new situations and challenges as they arise. A team player . You will develop and maintain working relationships and continuously work to improve relationships, contacts, and networks. Organized. You will complete your assignments with minimal supervision. Positive . You can maintain a positive attitude when working with co-workers, management, and customers. What you will typically be responsible for: Performing regular inspections of your assigned facilities for proper equipment operation. Recording and maintaining maintenance records of all mechanical equipment in your facilities. Inspecting and logging conditions of fire extinguishers and emergency lighting. Testing and treating open and closed loop water systems used for heating and cooling. Responding to routine and emergency work orders submitted by customer departments. Working with outside contractors who perform EPA and OSHA required inspections and testing. Working with fellow tradespersons on tenant improvement projects within the County. A few reasons you might love this job: You will be part of a supportive environment with a strong and dedicated administration. All of the tools and equipment required to perform the duties will be provided. You will be part of a collaborative team where teamwork is highly encouraged and supported. Work-life balance that includes flexible scheduling and steady work. A few challenges you might face in this job : You may be assigned to work in a Detention Facility around inmates or detainees and /or in a hospital or medical setting around patients. You will spend time working alone around Contra Costa County, without a team member or supervisor present. Managing and completing multiple work orders in a timely manner. Scheduling work to meet customer needs such as working nights and weekends. Competencies: Delivering results: Meeting organizational goals and customer expectations and making decisions that produce high-quality results by applying technical knowledge, analyzing problems, and calculating risks Mechanical Insight: Comprehending how mechanical, electrical, and structural systems operate and interact Professional & Technical Expertise: Applying technical subject matter to the job Safety Focus: Showing vigilance and care in identifying and addressing health risks and safety hazards Actions & Results Focused (Taking Initiative): Initiating tasks and focusing on accomplishments Adaptability: Responding positively to change and modifying behaviors as the situation requires Attention to Detail: Focusing on the details of work content, work steps and final work products Oral Communication: Engaging effectively in dialogue Building & Maintaining Relationships: Establishing rapport and maintaining mutually productive relationships Teamwork: Collaborating with others to achieve shared goals To read the complete job description, please visit: Class Specifications | Stationary Engineer | Class Spec Details (governmentjobs.com) The eligible list established from this recruitment may remain in effect for six months Minimum Qualifications License Required: Possession of a valid California Motor Vehicle Operator's License. Out of state motor vehicle operator’s license will be accepted during the application process. Certificates: Must be Type 1 or Type 2 certified for Handling Chlorofluorocarbons at the time of application, and obtain a Federal Universal Certification for Handling Chlorofluorocarbons within nine (9) months from the date of hire. Education: 1) Possession of a high school diploma, G.E.D. equivalency or high school proficiency certificates and (2) satisfactory completion of at least one college-level course in BOTH basic refrigeration and electricity OR completion of a HVAC trade school program. Experience: Two (2) years of full-time or its equivalent experience as a stationary engineer or operating engineer maintaining and repairing HVAC equipment. Substitution for College Courses: An additional three (3) years of full time (or its equivalent) experience as a Stationary Engineer or Operating Engineer, maintaining and repairing HVAC equipment; one (1) year of which must have been at the journey level Substitution for Experience: Completion of a HVAC apprenticeship certification program Other Requirement: Applicants must be able to obtain the Detention Facility Clearance to work in the detention facilities COMPLETE APPLICATION AND CERTIFICATION ARE REQUIRED. YOU MUST ATTACH COPIES OF REQIRED CERTIFICATION TO YOUR APPLICATION. INCOMPLETE APPLICATIONS OR APPLICATIONS WITHOUT REQUIRED CERTIFICATION WILL BE DISQUALIFIED. Desirable Qualifications: Knowledge of diesel generators. Experience working with data/server room cooling systems. Knowledge of current Title 24 and/or OSHA requirements. Selection Process Application Filing and Evaluation: Applications will be evaluated to determine which candidates will move forward in the next phase of the recruitment process. Training and Experience Evaluation: Candidates that clearly demonstrate they possess the minimum qualifications will have their training and experience evaluated. The training and experience questionnaire is a part of the application and is designed to evaluate each ca ndidate's relevant education, training and/or experience as presented in the application and supplemental questionnaire. (Weighted 100%) Final Selection Interviews: These will be scheduled by the department once the eligible list is established. The Human Resources Department may change the examination steps noted above in accordance with the Personnel Management Regulations and accepted selection practices. For recruitment-specific questions, please contact Delaina Gillaspy at Delaina.Gillaspy@hrd.cccounty.us or any technical issues, please contact the Government Jobs’ applicant support team for assistance at +1 855-524-5627. CONVICTION HISTORY After you receive a conditional job offer, you will be fingerprinted, and your fingerprints will be sent to the California Department of Justice (DOJ) and the Federal Bureau of Investigation (FBI). The resulting report of your conviction history (if any) will be used to determine whether the nature of your conviction conflicts with the specific duties and responsibilities of the job for which you have received a conditional job offer. If a conflict exists, you will be asked to present any evidence of rehabilitation that may mitigate the conflict, except when federal or state regulations bar employment in specific circumstances. Having a conviction history does not automatically preclude you from a job with Contra Costa County. If you accept a conditional job offer, the Human Resources department will contact you to schedule a fingerprinting appointment. DISASTER SERVICE WORKER All Contra Costa County employees are designated Disaster Service Workers through state and local law. Employment with the County requires the affirmation of a loyalty oath to this effect. Employees are required to complete all Disaster Service Worker-related training as assigned, and to return to work as ordered in the event of an emergency. EQUAL EMPLOYMENT OPPORTUNITY It is the policy of Contra Costa County to consider all applicants for employment without regard to race, color, religion, sex, national origin, ethnicity, age, disability, sexual orientation, gender, gender identity, gender expression, marital status, ancestry, medical condition, genetic information, military or veteran status, or other protected category under the law. To find more information on Benefits offered by Contra Costa County, please go to https://www.contracosta.ca.gov/1343/Employee-Benefits Closing Date/Time: Continuous
Apr 21, 2024
Full Time
The Position Contra Costa County’s Public Works Department is seeking qualified individuals to fill multiple Stationary Engineer (Building Maintenance Mechanic) vacancies. All interested and qualified individuals are encouraged to apply. The Public Works Department has an organizational culture that strives for continuous improvement. Our mission is to deliver cost effective, safe, reliable, and sustainable projects, programs, and quality services with a focus on our communities and provide support services that are competitive, attentive, responsive, efficient, and safe to enable the County Departments to provide high quality services to the public. Stationary Engineers operate, maintain, and repair HVAC systems in a variety of buildings throughout the County. Responsibilities include resolving customer complaints related to airflow, heating, cooling, and ventilation; responding to HVAC related alarms and elevator malfunctions; calibrating and maintaining pneumatic, electric, and computerized (DDC system) controls; inspecting chillers and ensuring containment and proper handling of refrigerants, which may contain chlorofluorocarbons and other hazardous materials; and other related work as required. The Public Works Department is currently recruiting to fill four (4) vacant positions for the Stationary Engineer classification. Employees may work in detention facilities and in close proximity to inmates and patients. We are looking for someone who is: Detail oriented . You can deliver measurable high-quality, timely, and cost-effective results. Safety oriented . You can adhere to all safety practices in the workplace A problem solver . You can adapt to new situations and challenges as they arise. A team player . You will develop and maintain working relationships and continuously work to improve relationships, contacts, and networks. Organized. You will complete your assignments with minimal supervision. Positive . You can maintain a positive attitude when working with co-workers, management, and customers. What you will typically be responsible for: Performing regular inspections of your assigned facilities for proper equipment operation. Recording and maintaining maintenance records of all mechanical equipment in your facilities. Inspecting and logging conditions of fire extinguishers and emergency lighting. Testing and treating open and closed loop water systems used for heating and cooling. Responding to routine and emergency work orders submitted by customer departments. Working with outside contractors who perform EPA and OSHA required inspections and testing. Working with fellow tradespersons on tenant improvement projects within the County. A few reasons you might love this job: You will be part of a supportive environment with a strong and dedicated administration. All of the tools and equipment required to perform the duties will be provided. You will be part of a collaborative team where teamwork is highly encouraged and supported. Work-life balance that includes flexible scheduling and steady work. A few challenges you might face in this job : You may be assigned to work in a Detention Facility around inmates or detainees and /or in a hospital or medical setting around patients. You will spend time working alone around Contra Costa County, without a team member or supervisor present. Managing and completing multiple work orders in a timely manner. Scheduling work to meet customer needs such as working nights and weekends. Competencies: Delivering results: Meeting organizational goals and customer expectations and making decisions that produce high-quality results by applying technical knowledge, analyzing problems, and calculating risks Mechanical Insight: Comprehending how mechanical, electrical, and structural systems operate and interact Professional & Technical Expertise: Applying technical subject matter to the job Safety Focus: Showing vigilance and care in identifying and addressing health risks and safety hazards Actions & Results Focused (Taking Initiative): Initiating tasks and focusing on accomplishments Adaptability: Responding positively to change and modifying behaviors as the situation requires Attention to Detail: Focusing on the details of work content, work steps and final work products Oral Communication: Engaging effectively in dialogue Building & Maintaining Relationships: Establishing rapport and maintaining mutually productive relationships Teamwork: Collaborating with others to achieve shared goals To read the complete job description, please visit: Class Specifications | Stationary Engineer | Class Spec Details (governmentjobs.com) The eligible list established from this recruitment may remain in effect for six months Minimum Qualifications License Required: Possession of a valid California Motor Vehicle Operator's License. Out of state motor vehicle operator’s license will be accepted during the application process. Certificates: Must be Type 1 or Type 2 certified for Handling Chlorofluorocarbons at the time of application, and obtain a Federal Universal Certification for Handling Chlorofluorocarbons within nine (9) months from the date of hire. Education: 1) Possession of a high school diploma, G.E.D. equivalency or high school proficiency certificates and (2) satisfactory completion of at least one college-level course in BOTH basic refrigeration and electricity OR completion of a HVAC trade school program. Experience: Two (2) years of full-time or its equivalent experience as a stationary engineer or operating engineer maintaining and repairing HVAC equipment. Substitution for College Courses: An additional three (3) years of full time (or its equivalent) experience as a Stationary Engineer or Operating Engineer, maintaining and repairing HVAC equipment; one (1) year of which must have been at the journey level Substitution for Experience: Completion of a HVAC apprenticeship certification program Other Requirement: Applicants must be able to obtain the Detention Facility Clearance to work in the detention facilities COMPLETE APPLICATION AND CERTIFICATION ARE REQUIRED. YOU MUST ATTACH COPIES OF REQIRED CERTIFICATION TO YOUR APPLICATION. INCOMPLETE APPLICATIONS OR APPLICATIONS WITHOUT REQUIRED CERTIFICATION WILL BE DISQUALIFIED. Desirable Qualifications: Knowledge of diesel generators. Experience working with data/server room cooling systems. Knowledge of current Title 24 and/or OSHA requirements. Selection Process Application Filing and Evaluation: Applications will be evaluated to determine which candidates will move forward in the next phase of the recruitment process. Training and Experience Evaluation: Candidates that clearly demonstrate they possess the minimum qualifications will have their training and experience evaluated. The training and experience questionnaire is a part of the application and is designed to evaluate each ca ndidate's relevant education, training and/or experience as presented in the application and supplemental questionnaire. (Weighted 100%) Final Selection Interviews: These will be scheduled by the department once the eligible list is established. The Human Resources Department may change the examination steps noted above in accordance with the Personnel Management Regulations and accepted selection practices. For recruitment-specific questions, please contact Delaina Gillaspy at Delaina.Gillaspy@hrd.cccounty.us or any technical issues, please contact the Government Jobs’ applicant support team for assistance at +1 855-524-5627. CONVICTION HISTORY After you receive a conditional job offer, you will be fingerprinted, and your fingerprints will be sent to the California Department of Justice (DOJ) and the Federal Bureau of Investigation (FBI). The resulting report of your conviction history (if any) will be used to determine whether the nature of your conviction conflicts with the specific duties and responsibilities of the job for which you have received a conditional job offer. If a conflict exists, you will be asked to present any evidence of rehabilitation that may mitigate the conflict, except when federal or state regulations bar employment in specific circumstances. Having a conviction history does not automatically preclude you from a job with Contra Costa County. If you accept a conditional job offer, the Human Resources department will contact you to schedule a fingerprinting appointment. DISASTER SERVICE WORKER All Contra Costa County employees are designated Disaster Service Workers through state and local law. Employment with the County requires the affirmation of a loyalty oath to this effect. Employees are required to complete all Disaster Service Worker-related training as assigned, and to return to work as ordered in the event of an emergency. EQUAL EMPLOYMENT OPPORTUNITY It is the policy of Contra Costa County to consider all applicants for employment without regard to race, color, religion, sex, national origin, ethnicity, age, disability, sexual orientation, gender, gender identity, gender expression, marital status, ancestry, medical condition, genetic information, military or veteran status, or other protected category under the law. To find more information on Benefits offered by Contra Costa County, please go to https://www.contracosta.ca.gov/1343/Employee-Benefits Closing Date/Time: Continuous
Clark County Water Reclamation District
Las Vegas, NV, United States
ABOUT THE POSITION The Clark County Water Reclamation District is seeking qualified candidates to apply for the position of Part Time Program Assistant. Incumbents in this position will work in assigned Service Groups to obtain entry-level experience in the wastewater industry. Incumbents will work with professional level staff to acquire the knowledge and skills to assist them in becoming familiar with the wastewater treatment industry. This recruitment will be used to fill current and futures vacancies at the Las Vegas, Nevada (Flamingo Water Resource Center) worksite location. Automotive Fleet (Program Assistant) Under the direction of the WRD Fleet Supervisor, incumbents will learn and perform a variety of basic and technical work in automotive fleet. Incumbents will have the opportunity to operate and maintain equipment, perform maintenance and repairs on vehicles and equipment, and carry out other activities related to the successful operation of an automotive fleet service group. Wastewater Plant Operations (Program Assistant) Under the direction of the WRD WW Plant Operations Supervisor, incumbents will learn and perform a variety of skilled and semi-skilled work in operations. Incumbents will have the opportunity to operate and maintain equipment, monitor flow, learn wastewater treatment processes, conduct plant sampling, and carry out other activities related to the successful operation of a large wastewater treatment facility. Wastewater Collection Systems (Program Assistant) Under the direction of the WRD WW Collection Systems Supervisor, incumbents will learn and perform a variety of skilled, semi-skilled and unskilled work in collection system operations. Incumbents will have the opportunity to operate and maintain a combination vacuum and jet-rod truck, assist with odor control maintenance and operations, support construction and repair activities, help with condition assessment, and carry out other activities related to the successful operation of a wastewater collection systems. Centralized Maintenance/Lift Stations (Program Assistant) Under the direction of the WRD Maintenance Supervisor, incumbents will learn and perform a variety of skilled and semi-skilled work in maintenance operations. Incumbents will have the opportunity to operate and maintain equipment, learn wastewater treatment processes, and carry out electrical, HVAC, facility and mechanical maintenance or other activities related to the successful operation and maintenance of a large wastewater treatment facility and pumping stations. Human Resources reserves the right to call only the most qualified applicants to the selection process. MINIMUM REQUIREMENTS Education and Experience: Applicants must be 18 years of age or older. Equivalent to graduation from high school. Qualifying education and experience must be clearly documented in the "Education" and "Work Experience" sections of the application. Do not substitute a resume for your application or write "see attached resume" on your application. Working Conditions: Work outdoors in all weather conditions. Some positions may be exposed to hazardous chemicals and may be required to wear self-contained breathing equipment. Licensing and Certification: Must possess a valid Class C Nevada Driver's License at the time of appointment. Background Investigation: Employment is contingent upon successful completion of a background investigation. Periodically after employment background investigations may be conducted. Medical Examination: Employment is contingent upon the results of an physical examination performed by our examining physician. Pre-Employment Drug Testing: Employment is contingent upon the results of a pre-employment drug examination. EXAMPLES OF DUTIES General Program Assistant Tasks Performed in All Service Groups Uses standard office equipment, including a computer. Will use standard Microsoft software such as Outlook, Word, and Excel. Participates as an active member of a work team; assists other staff as required; performs additional duties as necessary. The part time Program Assistant position functions as an entry-level position. Due to the diverse utilization of the position, incumbents in this classification may be assigned to any of the following Service Groups. Automotive Fleet (Program Assistant) Helps mechanic perform maintenance and repairs such as tune-ups and oil changes, checks tires and brakes, replaces spark plugs and engages in other similar tasks; Assists mechanic with electrical systems such as replacing batteries, starters, and lights; Test drives vehicles to ensure repairs are completed properly; Cleans the shop and returns tools to proper location; Inspects tools and equipment to ensure they are in working order; and Updates maintenance and repair logs for vehicles. Wastewater Plant Operations (Program Assistant) Learns and performs the operation of pumps, valves, and other equipment by computer, hand or mechanical means to regulate the flow of wastewater through various preliminary, primary, secondary and tertiary treatment processes; Learns and performs the operation of solid processing equipment to separate liquids from solids; Performs daily rounds in the treatment process area of the plant; Inspects plant equipment and reports any failures or operating difficulties to the lead operator; May initiate work orders and request repairs in the computerized maintenance management system; Performs collection of samples of wastewater, scum, grit, sludge, and other materials; Properly records chain of custody information for samples delivered to the laboratory; Assists and may run process lab testing to determine daily efficiency of treatment processes and online instrumentation; Performs daily reading of meters, gauges, charts and instruments and documents all required information; Receives and unloads bulk chemicals, some of which are hazardous; Learns to interpret material safety data sheets (SDS) for all chemicals used on site; Performs general housekeeping duties and performs routine preventive maintenance of plant equipment, grounds, and facilities; and Performs record keeping functions such as logging information regarding plant operation, test results from process lab, maintenance work performed and unusual operating conditions in a logbook and or database. Wastewater Collection Systems (Program Assistant) Assists with the operation of high-pressure jet rodding and vacuum equipment to clean sewers and storm drains, hydro-excavate around underground utilities and support other cleaning activities; Assists with all construction activities associated with pipeline and manhole repairs in roadways and easements, including paving; Performs heavy physical labor involved with loading/unloading supplies, equipment and materials; Assists in setting up and breaking down temporary traffic safety patterns, as directed; Assists in the operation and maintenance of odor control facilities; Installs and removes odor control manhole inserts and replaces carbon media; Performs basic maintenance of equipment, pumps and mechanical equipment; Assists in the operation of a closed-circuit camera truck to televise sanitary sewer lines; and Learns basic maintenance of all Collection Systems equipment. Centralized Maintenance/Lift Stations Service Groups (Program Assistant) Performs preventive maintenance of pumps, valves, compressors, and other mechanical equipment that push the flow of wastewater through various preliminary, primary, secondary and tertiary treatment processes. Assists in the repair of pumps, valves, compressors, and other mechanical equipment; Performs maintenance on electrical equipment, HVAC equipment and facilities equipment; Assists with daily preventive maintenance electrical equipment, HVAC equipment and facilities equipment; Performs daily reading of meters, gauges, charts and instruments and documents all required information; Interprets material safety data sheets (SDS) for all chemicals used on site; and Performs general housekeeping duties and performs routine preventive maintenance of plant equipment, grounds, and facilities. PHYSICAL DEMANDS PHYSICAL DEMANDS Mobility to work in a typical plant operation and/or field construction and maintenance setting, including operating typical trade and construction equipment, hand and power tools; Ability to use standard office equipment, and to drive a motor vehicle to various work sites; May be required to work on roadways; Stamina to stand, walk and climb and to work in confined or awkward spaces for an extended period of time; strength to lift and maneuver materials and equipment weighing up to 100 pounds with proper equipment; vision to read printed materials; and hearing and speech to communicate in person or over a radio or telephone. Accommodation may be made for some of these physical demands for otherwise qualified individuals who require and request such accommodation. Closing Date/Time: Continuous
Mar 08, 2024
Part Time
ABOUT THE POSITION The Clark County Water Reclamation District is seeking qualified candidates to apply for the position of Part Time Program Assistant. Incumbents in this position will work in assigned Service Groups to obtain entry-level experience in the wastewater industry. Incumbents will work with professional level staff to acquire the knowledge and skills to assist them in becoming familiar with the wastewater treatment industry. This recruitment will be used to fill current and futures vacancies at the Las Vegas, Nevada (Flamingo Water Resource Center) worksite location. Automotive Fleet (Program Assistant) Under the direction of the WRD Fleet Supervisor, incumbents will learn and perform a variety of basic and technical work in automotive fleet. Incumbents will have the opportunity to operate and maintain equipment, perform maintenance and repairs on vehicles and equipment, and carry out other activities related to the successful operation of an automotive fleet service group. Wastewater Plant Operations (Program Assistant) Under the direction of the WRD WW Plant Operations Supervisor, incumbents will learn and perform a variety of skilled and semi-skilled work in operations. Incumbents will have the opportunity to operate and maintain equipment, monitor flow, learn wastewater treatment processes, conduct plant sampling, and carry out other activities related to the successful operation of a large wastewater treatment facility. Wastewater Collection Systems (Program Assistant) Under the direction of the WRD WW Collection Systems Supervisor, incumbents will learn and perform a variety of skilled, semi-skilled and unskilled work in collection system operations. Incumbents will have the opportunity to operate and maintain a combination vacuum and jet-rod truck, assist with odor control maintenance and operations, support construction and repair activities, help with condition assessment, and carry out other activities related to the successful operation of a wastewater collection systems. Centralized Maintenance/Lift Stations (Program Assistant) Under the direction of the WRD Maintenance Supervisor, incumbents will learn and perform a variety of skilled and semi-skilled work in maintenance operations. Incumbents will have the opportunity to operate and maintain equipment, learn wastewater treatment processes, and carry out electrical, HVAC, facility and mechanical maintenance or other activities related to the successful operation and maintenance of a large wastewater treatment facility and pumping stations. Human Resources reserves the right to call only the most qualified applicants to the selection process. MINIMUM REQUIREMENTS Education and Experience: Applicants must be 18 years of age or older. Equivalent to graduation from high school. Qualifying education and experience must be clearly documented in the "Education" and "Work Experience" sections of the application. Do not substitute a resume for your application or write "see attached resume" on your application. Working Conditions: Work outdoors in all weather conditions. Some positions may be exposed to hazardous chemicals and may be required to wear self-contained breathing equipment. Licensing and Certification: Must possess a valid Class C Nevada Driver's License at the time of appointment. Background Investigation: Employment is contingent upon successful completion of a background investigation. Periodically after employment background investigations may be conducted. Medical Examination: Employment is contingent upon the results of an physical examination performed by our examining physician. Pre-Employment Drug Testing: Employment is contingent upon the results of a pre-employment drug examination. EXAMPLES OF DUTIES General Program Assistant Tasks Performed in All Service Groups Uses standard office equipment, including a computer. Will use standard Microsoft software such as Outlook, Word, and Excel. Participates as an active member of a work team; assists other staff as required; performs additional duties as necessary. The part time Program Assistant position functions as an entry-level position. Due to the diverse utilization of the position, incumbents in this classification may be assigned to any of the following Service Groups. Automotive Fleet (Program Assistant) Helps mechanic perform maintenance and repairs such as tune-ups and oil changes, checks tires and brakes, replaces spark plugs and engages in other similar tasks; Assists mechanic with electrical systems such as replacing batteries, starters, and lights; Test drives vehicles to ensure repairs are completed properly; Cleans the shop and returns tools to proper location; Inspects tools and equipment to ensure they are in working order; and Updates maintenance and repair logs for vehicles. Wastewater Plant Operations (Program Assistant) Learns and performs the operation of pumps, valves, and other equipment by computer, hand or mechanical means to regulate the flow of wastewater through various preliminary, primary, secondary and tertiary treatment processes; Learns and performs the operation of solid processing equipment to separate liquids from solids; Performs daily rounds in the treatment process area of the plant; Inspects plant equipment and reports any failures or operating difficulties to the lead operator; May initiate work orders and request repairs in the computerized maintenance management system; Performs collection of samples of wastewater, scum, grit, sludge, and other materials; Properly records chain of custody information for samples delivered to the laboratory; Assists and may run process lab testing to determine daily efficiency of treatment processes and online instrumentation; Performs daily reading of meters, gauges, charts and instruments and documents all required information; Receives and unloads bulk chemicals, some of which are hazardous; Learns to interpret material safety data sheets (SDS) for all chemicals used on site; Performs general housekeeping duties and performs routine preventive maintenance of plant equipment, grounds, and facilities; and Performs record keeping functions such as logging information regarding plant operation, test results from process lab, maintenance work performed and unusual operating conditions in a logbook and or database. Wastewater Collection Systems (Program Assistant) Assists with the operation of high-pressure jet rodding and vacuum equipment to clean sewers and storm drains, hydro-excavate around underground utilities and support other cleaning activities; Assists with all construction activities associated with pipeline and manhole repairs in roadways and easements, including paving; Performs heavy physical labor involved with loading/unloading supplies, equipment and materials; Assists in setting up and breaking down temporary traffic safety patterns, as directed; Assists in the operation and maintenance of odor control facilities; Installs and removes odor control manhole inserts and replaces carbon media; Performs basic maintenance of equipment, pumps and mechanical equipment; Assists in the operation of a closed-circuit camera truck to televise sanitary sewer lines; and Learns basic maintenance of all Collection Systems equipment. Centralized Maintenance/Lift Stations Service Groups (Program Assistant) Performs preventive maintenance of pumps, valves, compressors, and other mechanical equipment that push the flow of wastewater through various preliminary, primary, secondary and tertiary treatment processes. Assists in the repair of pumps, valves, compressors, and other mechanical equipment; Performs maintenance on electrical equipment, HVAC equipment and facilities equipment; Assists with daily preventive maintenance electrical equipment, HVAC equipment and facilities equipment; Performs daily reading of meters, gauges, charts and instruments and documents all required information; Interprets material safety data sheets (SDS) for all chemicals used on site; and Performs general housekeeping duties and performs routine preventive maintenance of plant equipment, grounds, and facilities. PHYSICAL DEMANDS PHYSICAL DEMANDS Mobility to work in a typical plant operation and/or field construction and maintenance setting, including operating typical trade and construction equipment, hand and power tools; Ability to use standard office equipment, and to drive a motor vehicle to various work sites; May be required to work on roadways; Stamina to stand, walk and climb and to work in confined or awkward spaces for an extended period of time; strength to lift and maneuver materials and equipment weighing up to 100 pounds with proper equipment; vision to read printed materials; and hearing and speech to communicate in person or over a radio or telephone. Accommodation may be made for some of these physical demands for otherwise qualified individuals who require and request such accommodation. Closing Date/Time: Continuous