California State University (CSU) Northridge
18111 Nordhoff Street, Northridge, CA 91330, USA
CSUN strives to be a destination workplace, where everyone understands that they belong to a community that is vital in advancing student success and providing exemplary service to all stakeholders. We foster an environment of success, both for our students and our employees. We have a relentless passion for celebrating diversity, equity, and inclusion as well as being an employer of choice. You will also have the opportunity to realize your own personal goals and be recognized for the work you do, and enjoy the unique value the CSUN community can offer. If this sounds like you, you’ve come to the right place. Learn more: https://www.csun.edu/about-csun . Major Duties Under general supervision of the Associate Director, the Lead Locksmith plans, designs, and oversees the implementation and maintenance of the master lock and key program. The incumbent serves as the departmental expert on all matters about locks, locking systems, and fastening devices, and consults with staff on the types of systems and devices most appropriate for new facilities and replacements. Provides analysis, controls computerized maintenance management systems, and manual systems, and oversees the planning and implementation of locks and locking plan initiatives. Determines material and equipment needs; estimates costs for new locks or for replacement locks; analyzes and responds appropriately to emergencies. Maintains complex manual and/or computerized record-keeping systems to manage a facility of 37 buildings with over 3,200 locks that are in good operating condition. Performs other duties as assigned. *NOTE: To view the full position description including all of the required qualifications copy and paste this link into your browser: https://mycsun.box.com/s/t8ob5ykx5hr5naa3gz8jmlrw6p5gkag2 Qualifications Two or more years of experience as a journey-level locksmith that included lead work coordination responsibilities and training in master key systems. Combination of progressively responsible training and experience which demonstrates achievement of journey-level skills equivalent to that acquired through completion of a locksmith’s apprenticeship program. License or certification as a locksmith and a valid California Driver’s License. Knowledge, Skills, & Abilities Thorough knowledge: of the methods, materials, tools and equipment used in the locksmith trade, including complex access and control systems; all types of locks, fastening devices and related hardware; applicable state codes about the locksmith trade including those related to fire exits, door hardware and fastening devices. Comprehensive knowledge of master key systems and a working knowledge of effective supervisory practices and techniques; electrical locking and security systems and devices. Must be able to perform journey-level locksmith work; use features of applicable access control systems; read, interpret, and work from shop blueprints, plans, drawings, and specifications; maintain computerized inventory and master locking systems records; prepare standard reports; provide instruction to unskilled and semi-skilled assistants; read and write at a level appropriate to the position; and perform arithmetic calculations as required by the position. Ability to: maintain computerized inventory and master locking systems records; lead, instruct, and coordinate the work of a small group or crew of skilled and semi-skilled assistants; determine staffing, material, and equipment needs; estimate costs for new locking systems or for replacement systems; analyze and respond appropriately to emergencies; and maintain more complex manual and/or computerized record-keeping systems. Pay, Benefits, & Work Schedule The university offers an excellent benefits package, including but not limited to: medical, dental, vision, retirement & savings, tuition waiver and more. Classification: Lead Locksmith / 6643 / grade 1 The anticipated HIRING RANGE: $6459 - $7028 per month, dependent upon qualifications and experience. The salary range for this classification is: $6459 - $8339 per month. HOURS: Full Time; 40 hours per week; Monday through Friday (7 am-3:30 pm); may include evenings and weekends. This is a Regular position with a one-year probationary period. General Information This job opening has been re-posted and will remain OPEN UNTIL FILLED. This position is a sensitive position as designated by the CSU. A background check (including a criminal records check) must be completed satisfactorily. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current CSU employees who apply for the position. The person holding this position may be considered a 'mandated reporter' under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. In accordance with the California State University (CSU) Out-of-State Employment Policy, the CSU is a state entity whose business operations reside within the State of California and prohibits hiring employees to perform CSU-related work outside of California. Candidates should apply by completing the CSUN on-line application. To submit an application and for more detailed information on the application and hiring process, please visit this link: www.csun.edu/careers The CSU recommends that faculty, staff, and students who are accessing campus facilities at any university location be immunized against SARS-CoV-2, the virus that causes COVID-19, and that all individuals who access any in-person program or activity (on- or off-campus) operated or controlled by the University follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications and comply with other safety measures established by each campus. Equal Employment Opportunity CSUN is an Equal Opportunity Employer and prohibits discrimination on the basis of race, color, ethnicity, ancestry, religion, national origin, age, gender, gender identity/expression, sexual orientation, genetic information, medical condition, marital status, covered military and veteran status, and disability. Reasonable accommodations will be provided for applicants with disabilities who self-disclose by contacting Recruitment Services at 818-677-2101. Advertised: Mar 27 2024 Pacific Daylight Time Applications close: Closing Date/Time:
Jul 14, 2024
CSUN strives to be a destination workplace, where everyone understands that they belong to a community that is vital in advancing student success and providing exemplary service to all stakeholders. We foster an environment of success, both for our students and our employees. We have a relentless passion for celebrating diversity, equity, and inclusion as well as being an employer of choice. You will also have the opportunity to realize your own personal goals and be recognized for the work you do, and enjoy the unique value the CSUN community can offer. If this sounds like you, you’ve come to the right place. Learn more: https://www.csun.edu/about-csun . Major Duties Under general supervision of the Associate Director, the Lead Locksmith plans, designs, and oversees the implementation and maintenance of the master lock and key program. The incumbent serves as the departmental expert on all matters about locks, locking systems, and fastening devices, and consults with staff on the types of systems and devices most appropriate for new facilities and replacements. Provides analysis, controls computerized maintenance management systems, and manual systems, and oversees the planning and implementation of locks and locking plan initiatives. Determines material and equipment needs; estimates costs for new locks or for replacement locks; analyzes and responds appropriately to emergencies. Maintains complex manual and/or computerized record-keeping systems to manage a facility of 37 buildings with over 3,200 locks that are in good operating condition. Performs other duties as assigned. *NOTE: To view the full position description including all of the required qualifications copy and paste this link into your browser: https://mycsun.box.com/s/t8ob5ykx5hr5naa3gz8jmlrw6p5gkag2 Qualifications Two or more years of experience as a journey-level locksmith that included lead work coordination responsibilities and training in master key systems. Combination of progressively responsible training and experience which demonstrates achievement of journey-level skills equivalent to that acquired through completion of a locksmith’s apprenticeship program. License or certification as a locksmith and a valid California Driver’s License. Knowledge, Skills, & Abilities Thorough knowledge: of the methods, materials, tools and equipment used in the locksmith trade, including complex access and control systems; all types of locks, fastening devices and related hardware; applicable state codes about the locksmith trade including those related to fire exits, door hardware and fastening devices. Comprehensive knowledge of master key systems and a working knowledge of effective supervisory practices and techniques; electrical locking and security systems and devices. Must be able to perform journey-level locksmith work; use features of applicable access control systems; read, interpret, and work from shop blueprints, plans, drawings, and specifications; maintain computerized inventory and master locking systems records; prepare standard reports; provide instruction to unskilled and semi-skilled assistants; read and write at a level appropriate to the position; and perform arithmetic calculations as required by the position. Ability to: maintain computerized inventory and master locking systems records; lead, instruct, and coordinate the work of a small group or crew of skilled and semi-skilled assistants; determine staffing, material, and equipment needs; estimate costs for new locking systems or for replacement systems; analyze and respond appropriately to emergencies; and maintain more complex manual and/or computerized record-keeping systems. Pay, Benefits, & Work Schedule The university offers an excellent benefits package, including but not limited to: medical, dental, vision, retirement & savings, tuition waiver and more. Classification: Lead Locksmith / 6643 / grade 1 The anticipated HIRING RANGE: $6459 - $7028 per month, dependent upon qualifications and experience. The salary range for this classification is: $6459 - $8339 per month. HOURS: Full Time; 40 hours per week; Monday through Friday (7 am-3:30 pm); may include evenings and weekends. This is a Regular position with a one-year probationary period. General Information This job opening has been re-posted and will remain OPEN UNTIL FILLED. This position is a sensitive position as designated by the CSU. A background check (including a criminal records check) must be completed satisfactorily. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current CSU employees who apply for the position. The person holding this position may be considered a 'mandated reporter' under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. In accordance with the California State University (CSU) Out-of-State Employment Policy, the CSU is a state entity whose business operations reside within the State of California and prohibits hiring employees to perform CSU-related work outside of California. Candidates should apply by completing the CSUN on-line application. To submit an application and for more detailed information on the application and hiring process, please visit this link: www.csun.edu/careers The CSU recommends that faculty, staff, and students who are accessing campus facilities at any university location be immunized against SARS-CoV-2, the virus that causes COVID-19, and that all individuals who access any in-person program or activity (on- or off-campus) operated or controlled by the University follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications and comply with other safety measures established by each campus. Equal Employment Opportunity CSUN is an Equal Opportunity Employer and prohibits discrimination on the basis of race, color, ethnicity, ancestry, religion, national origin, age, gender, gender identity/expression, sexual orientation, genetic information, medical condition, marital status, covered military and veteran status, and disability. Reasonable accommodations will be provided for applicants with disabilities who self-disclose by contacting Recruitment Services at 818-677-2101. Advertised: Mar 27 2024 Pacific Daylight Time Applications close: Closing Date/Time:
California State University (CSU) Northridge
18111 Nordhoff Street, Northridge, CA 91330, USA
CSUN strives to be a destination workplace, where everyone understands that they belong to a community that is vital in advancing student success and providing exemplary service to all stakeholders. We foster an environment of success, both for our students and our employees. We have a relentless passion for celebrating diversity, equity, and inclusion as well as being an employer of choice. You will also have the opportunity to realize your own personal goals and be recognized for the work you do, and enjoy the unique value the CSUN community can offer. If this sounds like you, you’ve come to the right place. Learn more: https://www.csun.edu/about-csun . Major Duties Under general supervision of the Associate Director, the Locksmith plans, designs, and oversees the implementation and maintenance of the master lock and key program. The incumbent serves as the departmental expert on all matters pertaining to locks, locking systems, and fastening devices; and consults with staff on the types of systems and devices most appropriate for new facilities and replacements. Provides analysis, controls computerized maintenance management systems, and manual systems, and oversees the planning and implementation of locks and locking plan initiatives. Determines material and equipment needs; estimates costs for new locks or replacement locks; analyzes and responds appropriately to emergency situations. Maintains complex manual and/or computerized record-keeping systems to manage a facility of 37 buildings with over 3,200 locks that are in good operating condition. Performs other duties as assigned. *NOTE: To view the full position description including all of the required qualifications copy and paste this link into your browser: https://mycsun.box.com/s/2w7tvyez3og51sbxhjxu9oyx211u4tea Qualifications Experience acquired through any combination of progressively responsible training and experience that demonstrates achievement of journey-level skills equivalent to that acquired through completion of a locksmith’s apprenticeship program. CANDIDATE MUST POSSESS A VALID CALIFORNIA DRIVER'S LICENSE Knowledge, Skills, & Abilities Thorough knowledge of the methods, materials, tools, and equipment used in the locksmith trade, including complex access and control systems; all types of locks, fastening devices, and related hardware; working knowledge of electrical locking and security systems and devices. Thorough knowledge of applicable state codes pertaining to the locksmith trade including those related to fire exits, door hardware, and fastening devices. Knowledge of key blank identification, ace keys, car keys, and key stocking/ordering. Skills and Abilities to perform journey-level locksmith work; use features of applicable access control systems; read, interpret, and work from shop blueprints, plans, drawings, and specifications; maintain computerized inventory and master locking systems records; prepare standard reports; provide instruction to unskilled and semi-skilled assistants; read and write at a level appropriate to the position; and perform arithmetic calculations as required by the position. Ability to operate standard office equipment such as PC computers and software such as Microsoft Office Suite, etc. Pay, Benefits, & Work Schedule The university offers an excellent benefits package, including but not limited to: medical, dental, vision, retirement & savings, tuition waiver and more. Classification: Locksmith / 6642 / 1 The anticipated HIRING RATE: $6076 per month. The salary range for this classification is: $6076 - $7766 per month. HOURS: Full Time; 40 hours per week; Monday through Friday. This is a Regular position with a one-year probationary period. The individual hired for this role will physically work on-campus in Northridge. This is not a telecommute position. General Information Applications received through August 27, 2024 will be considered in the initial review and the review of applications will continue until the position is filled. This position is sensitive as designated by the CSU. A background check (including a criminal records check) must be completed satisfactorily. Failure to satisfactorily complete the background check may affect the application status of applicants or the continued employment of current CSU employees who apply for the position. The person holding this position may be considered a 'mandated reporter' under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements outlined in CSU Executive Order 1083 as a condition of employment. Per the California State University (CSU) Out-of-State Employment Policy, the CSU is a state entity whose business operations reside within the State of California and prohibits hiring employees to perform CSU-related work outside of California. Candidates should apply by completing the CSUN on-line application. To apply and for more detailed information on the application and hiring process, please visit this link: www.csun.edu/careers The CSU recommends that faculty, staff, and students who are accessing campus facilities at any university location be immunized against SARS-CoV-2, the virus that causes COVID-19, and that all individuals who access any in-person program or activity (on- or off-campus) operated or controlled by the University follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications and comply with other safety measures established by each campus. Equal Employment Opportunity CSUN is an Equal Opportunity Employer and prohibits discrimination on the basis of race or ethnicity, religion or religious creed, nationality, age, gender, gender identity, gender expression, sexual orientation, genetic information, medical condition, marital status, veteran or military status, and disability. Reasonable accommodations will be provided for applicants with disabilities who self-disclose by contacting Recruitment Services at 818-677-2101. Advertised: Aug 14 2024 Pacific Daylight Time Applications close: Closing Date/Time:
Aug 15, 2024
CSUN strives to be a destination workplace, where everyone understands that they belong to a community that is vital in advancing student success and providing exemplary service to all stakeholders. We foster an environment of success, both for our students and our employees. We have a relentless passion for celebrating diversity, equity, and inclusion as well as being an employer of choice. You will also have the opportunity to realize your own personal goals and be recognized for the work you do, and enjoy the unique value the CSUN community can offer. If this sounds like you, you’ve come to the right place. Learn more: https://www.csun.edu/about-csun . Major Duties Under general supervision of the Associate Director, the Locksmith plans, designs, and oversees the implementation and maintenance of the master lock and key program. The incumbent serves as the departmental expert on all matters pertaining to locks, locking systems, and fastening devices; and consults with staff on the types of systems and devices most appropriate for new facilities and replacements. Provides analysis, controls computerized maintenance management systems, and manual systems, and oversees the planning and implementation of locks and locking plan initiatives. Determines material and equipment needs; estimates costs for new locks or replacement locks; analyzes and responds appropriately to emergency situations. Maintains complex manual and/or computerized record-keeping systems to manage a facility of 37 buildings with over 3,200 locks that are in good operating condition. Performs other duties as assigned. *NOTE: To view the full position description including all of the required qualifications copy and paste this link into your browser: https://mycsun.box.com/s/2w7tvyez3og51sbxhjxu9oyx211u4tea Qualifications Experience acquired through any combination of progressively responsible training and experience that demonstrates achievement of journey-level skills equivalent to that acquired through completion of a locksmith’s apprenticeship program. CANDIDATE MUST POSSESS A VALID CALIFORNIA DRIVER'S LICENSE Knowledge, Skills, & Abilities Thorough knowledge of the methods, materials, tools, and equipment used in the locksmith trade, including complex access and control systems; all types of locks, fastening devices, and related hardware; working knowledge of electrical locking and security systems and devices. Thorough knowledge of applicable state codes pertaining to the locksmith trade including those related to fire exits, door hardware, and fastening devices. Knowledge of key blank identification, ace keys, car keys, and key stocking/ordering. Skills and Abilities to perform journey-level locksmith work; use features of applicable access control systems; read, interpret, and work from shop blueprints, plans, drawings, and specifications; maintain computerized inventory and master locking systems records; prepare standard reports; provide instruction to unskilled and semi-skilled assistants; read and write at a level appropriate to the position; and perform arithmetic calculations as required by the position. Ability to operate standard office equipment such as PC computers and software such as Microsoft Office Suite, etc. Pay, Benefits, & Work Schedule The university offers an excellent benefits package, including but not limited to: medical, dental, vision, retirement & savings, tuition waiver and more. Classification: Locksmith / 6642 / 1 The anticipated HIRING RATE: $6076 per month. The salary range for this classification is: $6076 - $7766 per month. HOURS: Full Time; 40 hours per week; Monday through Friday. This is a Regular position with a one-year probationary period. The individual hired for this role will physically work on-campus in Northridge. This is not a telecommute position. General Information Applications received through August 27, 2024 will be considered in the initial review and the review of applications will continue until the position is filled. This position is sensitive as designated by the CSU. A background check (including a criminal records check) must be completed satisfactorily. Failure to satisfactorily complete the background check may affect the application status of applicants or the continued employment of current CSU employees who apply for the position. The person holding this position may be considered a 'mandated reporter' under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements outlined in CSU Executive Order 1083 as a condition of employment. Per the California State University (CSU) Out-of-State Employment Policy, the CSU is a state entity whose business operations reside within the State of California and prohibits hiring employees to perform CSU-related work outside of California. Candidates should apply by completing the CSUN on-line application. To apply and for more detailed information on the application and hiring process, please visit this link: www.csun.edu/careers The CSU recommends that faculty, staff, and students who are accessing campus facilities at any university location be immunized against SARS-CoV-2, the virus that causes COVID-19, and that all individuals who access any in-person program or activity (on- or off-campus) operated or controlled by the University follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications and comply with other safety measures established by each campus. Equal Employment Opportunity CSUN is an Equal Opportunity Employer and prohibits discrimination on the basis of race or ethnicity, religion or religious creed, nationality, age, gender, gender identity, gender expression, sexual orientation, genetic information, medical condition, marital status, veteran or military status, and disability. Reasonable accommodations will be provided for applicants with disabilities who self-disclose by contacting Recruitment Services at 818-677-2101. Advertised: Aug 14 2024 Pacific Daylight Time Applications close: Closing Date/Time:
California State University (CSU) Northridge
18111 Nordhoff Street, Northridge, CA 91330, USA
CSUN strives to be a destination workplace, where everyone understands that they belong to a community that is vital in advancing student success and providing exemplary service to all stakeholders. We foster an environment of success, both for our students and our employees. We have a relentless passion for celebrating diversity, equity, and inclusion as well as being an employer of choice. You will also have the opportunity to realize your own personal goals and be recognized for the work you do, and enjoy the unique value the CSUN community can offer. If this sounds like you, you’ve come to the right place. Learn more: https://www.csun.edu/about-csun . Major Duties Under general supervision, the Locksmith Supervisor is responsible for the day-to-day operations of the Lock Shop and for providing guidance and advice to management regarding campus access control security. The incumbent supervises the Lock Shop consisting of a crew of journeymen, and skilled and semi-skilled employees. Serves as a project manager and may coordinate the work of various other trades in relation to projects; schedules the day-to-day work of subordinates; inspects the work for adherence to established standards; and assures appropriate building codes are met; plans and schedules work for special projects and remodel work as assigned. Oversees of the master key system including access control, key, and security lock systems throughout the University. Utilizes software applications to perform various functions of the shop and is required to have oversight for a computerized lock and key maintenance system and inventory. Performs other duties as assigned. *NOTE: To view the full position description including all of the required qualifications copy and paste this link into your browser: https://mycsun.box.com/s/9unmiyq18jc34vlblrxoghkimxgia3pu Qualifications Three or more years of experience as a journey-level locksmith that include one to two years in a lead or supervisory capacity and thorough training in a master key systems and electronic locking and security systems. LICENSE: CANDIDATE MUST POSSESS A VALID CALIFORNIA DRIVER’S LICENSE. Knowledge, Skills, & Abilities Thorough knowledge of: the methods, materials, tools, and equipment used in the locksmith trade, including complex access and control systems; all types of locks, fastening devices and related hardware; and applicable state codes pertaining to the locksmith trade including those related to fire exits, door hardware and fastening devices. Working knowledge of electrical locking and security systems and devices. Ability to perform journey-level locksmith work; uses features of applicable access control systems; read. Interpret and work from shop blueprints, plans, drawing, and specifications; maintain computerized inventory and master locking systems records; prepare standard reports; provide instruction to unskilled and semi-skilled assistants; read and write at a level appropriate to the position; and perform arithmetic calculations as required by the position. Pay, Benefits, & Work Schedule The university offers an excellent benefits package, including but not limited to: medical, dental, vision, retirement & savings, tuition waiver and more. Classification: Supervising Locksmith / 6644 / 1 The anticipated HIRING RANGE: $6787 - $7889 per month, dependent upon qualifications and experience. The salary range for this classification is: $6787 - $8606 per month. HOURS: Full Time; 40 hours per week; Monday through Friday, 7:00 am - 3:30 pm. This is a Regular position with a one-year probationary period. The individual hired for this role will physically work on-campus in Northridge. This is not a telecommute position. General Information This job opening has been re-posted and will remain OPEN UNTIL FILLED. This position is a sensitive position as designated by the CSU. A background check (including a criminal records check) must be completed satisfactorily. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current CSU employees who apply for the position. The person holding this position may be considered a 'mandated reporter' under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. In accordance with the California State University (CSU) Out-of-State Employment Policy, the CSU is a state entity whose business operations reside within the State of California and prohibits hiring employees to perform CSU-related work outside of California. Candidates should apply by completing the CSUN on-line application. To submit an application and for more detailed information on the application and hiring process, please visit this link: www.csun.edu/careers The CSU recommends that faculty, staff, and students who are accessing campus facilities at any university location be immunized against SARS-CoV-2, the virus that causes COVID-19, and that all individuals who access any in-person program or activity (on- or off-campus) operated or controlled by the University follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications and comply with other safety measures established by each campus. Equal Employment Opportunity CSUN is an Equal Opportunity Employer and prohibits discrimination on the basis of race or ethnicity, religion or religious creed, nationality, age, gender, gender identity, gender expression, sexual orientation, genetic information, medical condition, marital status, veteran or military status, and disability. Reasonable accommodations will be provided for applicants with disabilities who self-disclose by contacting Recruitment Services at 818-677-2101. Advertised: Jul 01 2024 Pacific Daylight Time Applications close: Closing Date/Time:
Jul 02, 2024
CSUN strives to be a destination workplace, where everyone understands that they belong to a community that is vital in advancing student success and providing exemplary service to all stakeholders. We foster an environment of success, both for our students and our employees. We have a relentless passion for celebrating diversity, equity, and inclusion as well as being an employer of choice. You will also have the opportunity to realize your own personal goals and be recognized for the work you do, and enjoy the unique value the CSUN community can offer. If this sounds like you, you’ve come to the right place. Learn more: https://www.csun.edu/about-csun . Major Duties Under general supervision, the Locksmith Supervisor is responsible for the day-to-day operations of the Lock Shop and for providing guidance and advice to management regarding campus access control security. The incumbent supervises the Lock Shop consisting of a crew of journeymen, and skilled and semi-skilled employees. Serves as a project manager and may coordinate the work of various other trades in relation to projects; schedules the day-to-day work of subordinates; inspects the work for adherence to established standards; and assures appropriate building codes are met; plans and schedules work for special projects and remodel work as assigned. Oversees of the master key system including access control, key, and security lock systems throughout the University. Utilizes software applications to perform various functions of the shop and is required to have oversight for a computerized lock and key maintenance system and inventory. Performs other duties as assigned. *NOTE: To view the full position description including all of the required qualifications copy and paste this link into your browser: https://mycsun.box.com/s/9unmiyq18jc34vlblrxoghkimxgia3pu Qualifications Three or more years of experience as a journey-level locksmith that include one to two years in a lead or supervisory capacity and thorough training in a master key systems and electronic locking and security systems. LICENSE: CANDIDATE MUST POSSESS A VALID CALIFORNIA DRIVER’S LICENSE. Knowledge, Skills, & Abilities Thorough knowledge of: the methods, materials, tools, and equipment used in the locksmith trade, including complex access and control systems; all types of locks, fastening devices and related hardware; and applicable state codes pertaining to the locksmith trade including those related to fire exits, door hardware and fastening devices. Working knowledge of electrical locking and security systems and devices. Ability to perform journey-level locksmith work; uses features of applicable access control systems; read. Interpret and work from shop blueprints, plans, drawing, and specifications; maintain computerized inventory and master locking systems records; prepare standard reports; provide instruction to unskilled and semi-skilled assistants; read and write at a level appropriate to the position; and perform arithmetic calculations as required by the position. Pay, Benefits, & Work Schedule The university offers an excellent benefits package, including but not limited to: medical, dental, vision, retirement & savings, tuition waiver and more. Classification: Supervising Locksmith / 6644 / 1 The anticipated HIRING RANGE: $6787 - $7889 per month, dependent upon qualifications and experience. The salary range for this classification is: $6787 - $8606 per month. HOURS: Full Time; 40 hours per week; Monday through Friday, 7:00 am - 3:30 pm. This is a Regular position with a one-year probationary period. The individual hired for this role will physically work on-campus in Northridge. This is not a telecommute position. General Information This job opening has been re-posted and will remain OPEN UNTIL FILLED. This position is a sensitive position as designated by the CSU. A background check (including a criminal records check) must be completed satisfactorily. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current CSU employees who apply for the position. The person holding this position may be considered a 'mandated reporter' under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. In accordance with the California State University (CSU) Out-of-State Employment Policy, the CSU is a state entity whose business operations reside within the State of California and prohibits hiring employees to perform CSU-related work outside of California. Candidates should apply by completing the CSUN on-line application. To submit an application and for more detailed information on the application and hiring process, please visit this link: www.csun.edu/careers The CSU recommends that faculty, staff, and students who are accessing campus facilities at any university location be immunized against SARS-CoV-2, the virus that causes COVID-19, and that all individuals who access any in-person program or activity (on- or off-campus) operated or controlled by the University follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications and comply with other safety measures established by each campus. Equal Employment Opportunity CSUN is an Equal Opportunity Employer and prohibits discrimination on the basis of race or ethnicity, religion or religious creed, nationality, age, gender, gender identity, gender expression, sexual orientation, genetic information, medical condition, marital status, veteran or military status, and disability. Reasonable accommodations will be provided for applicants with disabilities who self-disclose by contacting Recruitment Services at 818-677-2101. Advertised: Jul 01 2024 Pacific Daylight Time Applications close: Closing Date/Time:
City of Scottsdale, Arizona
Scottsdale, Arizona, United States
Introduction The Locksmith, under general supervision, performs master/journey level work in the installation, repair, remodel, and maintenance of manual and automated locks, locking systems, and security devices; computerized access control systems; door openers, closers, and hardware. Preferred: Knowledge of Keystone Web and Best Access Systems. Anticipated salary may be up to the mid-point of the posted salary range depending on candidate's experience and internal equity. Minimum Qualifications Education and Experience: A high school diploma or GED equivalent required. Must have five years experience in installation and maintenance of security systems and equipment. Licensing, Certifications, and Other Requirements: Must possess and maintain a valid, unrestricted driver's license with no major citations within the past 39 months prior to the start date. The Arizona Department of Motor Vehicles requires that out-of-state driver's licenses must be surrendered within 10 days of relocating to the State of Arizona. Preferred: Arizona registered and certified locksmith. Every person employed by the City of Scottsdale shall reside in the State of Arizona during his or her active employment by the City, regardless of whether the employee is approved to remote work. Other pertinent licenses and/or certifications may be required of some positions depending on department/section assignment. Essential Functions Performs duties and responsibilities commensurate with assigned functional area which may include, but are not limited to, any combination of the following : Installs, repairs, and maintains commercial lockable hardware, such as doors, automatic electric doors, windows, lockers, and magnetic keying systems to ensure safety of people and facilities. Makes new keys and replaces lost or broken keys. Designs and maintains master key system, including access control systems. Cleans, maintains, adjusts, calibrates, and services equipment used in the performance of duties. Responds to routine and emergency calls for repairs and service. Available 24/7 for emergencies. Utilizes keystone key and core control software for designing and maintain an A2 small format master key system with multiple keyways. Performs key audits to maintain key control. Work Environment/Physical Demands Participates in emergency on-call services. The primary duties of this class are performed in a construction/maintenance environment within a city facility/park. The ability to endure prolonged exposure to arid desert conditions i.e. prolonged sun and heat exposure with knowledge of proper hydration methods. Work performed in various maintenance settings and field situations. Work sometimes involves bending and stooping repeatedly, lifting arms above head, and moderate muscular exertion and lifting. Make precise measurements and estimates. Exposure to dust, pollen, noise, inclement weather, temperature extremes, and unpleasant odors. Visual and muscular dexterity to operate: equipment, hand tools, computer, and telephone. Skillfully maneuver small objects. Move objects weighing up to 50 pounds. Sit for extended periods of time while driving a City vehicle or equipment maintaining constant vigilance to the surrounding area. Operate a motor vehicle and travel to/from various locations. Benefits Highlights: The City of Scottsdale offers a comprehensive benefits package including: 12 Paid Holidays, which includes 1 Floating Holiday Vacation Accrual; starts at 10.3 hours/month Sick Leave Accrual; 8 hours/month Medical (which includes behavioral health coverage), Dental and Vision Benefits City Paid Basic Life Insurance (equal to one times employee annual salary); option of Supplemental Life Insurance Tuition Reimbursement; $2,500/year Participation in the Arizona State Retirement System (ASRS) Defined benefit plan with mandatory employer and employee contributions currently at 12.29% which includes a Long-Term Disability benefit Supplemental Retirement Plans through Nationwide; 457 Pet Insurance Bilingual pay compensation Health insurance coverage is extended to employee's domestic partners. This allows benefited employees to elect coverage for health and dental insurance, and life insurance for domestic partners. Please visit the Human Resources and Benefits Information page for more information. Selection Process: The application and supplemental questions are an integral part of the selection process and must be completed in full in order for you to be considered as a candidate. Please complete each section and answer all questions as thoroughly as possible. DO NOT state "See Resume" in lieu of answering. Unanswered questions, incomplete responses, omissions, or partial information may result in disqualification from the selection process. Applicants whose education, training and experience most closely meet the needs of the position may be invited to participate in a selection process that may include a panel interview. Successful candidates will receive a post-offer, pre-employment background screening that may include: Fingerprinting search of the national FBI Database Criminal Background screening Drug Screen 39-Month Motor Vehicle Department Records Check The City of Scottsdale reserves the right to change this process at any time, potentially without advance notice. PLEASE NOTE: Years of experience are based on a work schedule of 2,080 hours per year for full-time positions and 1,040 hours per year for part-time positions, and while work experience may substitute for education on a year-for-year basis, depending upon the job classification, education may not be substituted for work experience. EQUAL EMPLOYMENT OPPORTUNITY : It is the policy of the city to provide employment opportunities to all persons based solely on ability, regardless of race, color, religion, sex, national origin, age, sexual orientation, gender identity or disability. When advised, reasonable accommodations will be made in order for an "otherwise qualified applicant" with a disability to participate in any phase of the recruitment process. Please contact Human Resources to request an accommodation. Persons with a disability may request a reasonable accommodation by contacting HR Receptionist at (480) 312-2491. Requests should be made 24 hours in advance or as early as possible to allow time to arrange the accommodation. For TTY users, the Arizona Relay Service (1-800-367-8939) may contact HR Receptionist at (480) 312-2491. This position description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the position change. Closing Date/Time: 9/26/2024 11:59 PM Arizona
Sep 06, 2024
Full Time
Introduction The Locksmith, under general supervision, performs master/journey level work in the installation, repair, remodel, and maintenance of manual and automated locks, locking systems, and security devices; computerized access control systems; door openers, closers, and hardware. Preferred: Knowledge of Keystone Web and Best Access Systems. Anticipated salary may be up to the mid-point of the posted salary range depending on candidate's experience and internal equity. Minimum Qualifications Education and Experience: A high school diploma or GED equivalent required. Must have five years experience in installation and maintenance of security systems and equipment. Licensing, Certifications, and Other Requirements: Must possess and maintain a valid, unrestricted driver's license with no major citations within the past 39 months prior to the start date. The Arizona Department of Motor Vehicles requires that out-of-state driver's licenses must be surrendered within 10 days of relocating to the State of Arizona. Preferred: Arizona registered and certified locksmith. Every person employed by the City of Scottsdale shall reside in the State of Arizona during his or her active employment by the City, regardless of whether the employee is approved to remote work. Other pertinent licenses and/or certifications may be required of some positions depending on department/section assignment. Essential Functions Performs duties and responsibilities commensurate with assigned functional area which may include, but are not limited to, any combination of the following : Installs, repairs, and maintains commercial lockable hardware, such as doors, automatic electric doors, windows, lockers, and magnetic keying systems to ensure safety of people and facilities. Makes new keys and replaces lost or broken keys. Designs and maintains master key system, including access control systems. Cleans, maintains, adjusts, calibrates, and services equipment used in the performance of duties. Responds to routine and emergency calls for repairs and service. Available 24/7 for emergencies. Utilizes keystone key and core control software for designing and maintain an A2 small format master key system with multiple keyways. Performs key audits to maintain key control. Work Environment/Physical Demands Participates in emergency on-call services. The primary duties of this class are performed in a construction/maintenance environment within a city facility/park. The ability to endure prolonged exposure to arid desert conditions i.e. prolonged sun and heat exposure with knowledge of proper hydration methods. Work performed in various maintenance settings and field situations. Work sometimes involves bending and stooping repeatedly, lifting arms above head, and moderate muscular exertion and lifting. Make precise measurements and estimates. Exposure to dust, pollen, noise, inclement weather, temperature extremes, and unpleasant odors. Visual and muscular dexterity to operate: equipment, hand tools, computer, and telephone. Skillfully maneuver small objects. Move objects weighing up to 50 pounds. Sit for extended periods of time while driving a City vehicle or equipment maintaining constant vigilance to the surrounding area. Operate a motor vehicle and travel to/from various locations. Benefits Highlights: The City of Scottsdale offers a comprehensive benefits package including: 12 Paid Holidays, which includes 1 Floating Holiday Vacation Accrual; starts at 10.3 hours/month Sick Leave Accrual; 8 hours/month Medical (which includes behavioral health coverage), Dental and Vision Benefits City Paid Basic Life Insurance (equal to one times employee annual salary); option of Supplemental Life Insurance Tuition Reimbursement; $2,500/year Participation in the Arizona State Retirement System (ASRS) Defined benefit plan with mandatory employer and employee contributions currently at 12.29% which includes a Long-Term Disability benefit Supplemental Retirement Plans through Nationwide; 457 Pet Insurance Bilingual pay compensation Health insurance coverage is extended to employee's domestic partners. This allows benefited employees to elect coverage for health and dental insurance, and life insurance for domestic partners. Please visit the Human Resources and Benefits Information page for more information. Selection Process: The application and supplemental questions are an integral part of the selection process and must be completed in full in order for you to be considered as a candidate. Please complete each section and answer all questions as thoroughly as possible. DO NOT state "See Resume" in lieu of answering. Unanswered questions, incomplete responses, omissions, or partial information may result in disqualification from the selection process. Applicants whose education, training and experience most closely meet the needs of the position may be invited to participate in a selection process that may include a panel interview. Successful candidates will receive a post-offer, pre-employment background screening that may include: Fingerprinting search of the national FBI Database Criminal Background screening Drug Screen 39-Month Motor Vehicle Department Records Check The City of Scottsdale reserves the right to change this process at any time, potentially without advance notice. PLEASE NOTE: Years of experience are based on a work schedule of 2,080 hours per year for full-time positions and 1,040 hours per year for part-time positions, and while work experience may substitute for education on a year-for-year basis, depending upon the job classification, education may not be substituted for work experience. EQUAL EMPLOYMENT OPPORTUNITY : It is the policy of the city to provide employment opportunities to all persons based solely on ability, regardless of race, color, religion, sex, national origin, age, sexual orientation, gender identity or disability. When advised, reasonable accommodations will be made in order for an "otherwise qualified applicant" with a disability to participate in any phase of the recruitment process. Please contact Human Resources to request an accommodation. Persons with a disability may request a reasonable accommodation by contacting HR Receptionist at (480) 312-2491. Requests should be made 24 hours in advance or as early as possible to allow time to arrange the accommodation. For TTY users, the Arizona Relay Service (1-800-367-8939) may contact HR Receptionist at (480) 312-2491. This position description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the position change. Closing Date/Time: 9/26/2024 11:59 PM Arizona
State of Missouri
Jefferson City, Missouri, United States
A position in the Missouri National Guard Facilities Division is more than a job, it's a calling. Our maintenance personnel supports soldiers that protect and aid Missourians citizens. Job Location: This position will be located at Ike Skelton Training Site, Jefferson City, MO. Performs skilled locksmith work by installing, maintaining and repairing different types of building locks including cylindrical, unit, mortise and rim, and reload cylinders; cutting new or replacement keys for authorized personnel as requested on Key Request forms; repairing locks on desks, file cabinets, display cases, and similar containers; picking locks for which keys have been lost; repairing or replacing door closure panic hardware or ADA openers; and making emergency repairs of locks as required under emergency conditions. Assists in maintaining Master Key Systems for the Missouri Army National Guard security by keeping accurate records of hardware changes and new lock installations in each building, and repairing, maintaining, and reloading cylinders for locks in the master key system. Aids during renovation of existing or construction of new facilities by determining the requirements for locking devices and systems from blueprints, schematics, or sketches, making recommendations for such systems based upon knowledge of available products, and installing or monitoring the installation of locking devices or systems on renovated or newly constructed facilities. Determines established applicable hardware specifications for locks and locking devices by interpreting hardware schedules, blueprints, plans, sketches, work orders, etc. Ensures that an adequate and appropriate stock of locksmith supplies and equipment is available for use by maintaining an inventory of supplies and equipment including key blanks, lock parts, levers and springs, knobs, and cylinders, preparing requisitions for replacements items as necessary, and storing the supplies and equipment in a secure storage facility. Establishes and maintains effective working relationships with those contacted in the course of work. Contributes to a work environment that encourages knowledge of, respect for, and development of skills to engage with those of other cultures or backgrounds. Contributes to the overall success of the department by performing other essential duties and responsibilities as assigned. We are looking for a self-motivated person with practical experience in the locksmithing field. Minimum Qualifications Valid State Driver’s License Be able to pass a background check. Lack of post-secondary education will not be used as the sole basis denying consideration to any applicant. The State of Missouri offers an excellent benefits package that includes a defined pension plan, generous amounts of leave and holiday time, and eligibility for health insurance coverage. Your total compensation is more than the dollars you receive in your paycheck. To help demonstrate the value of working for the State of Missouri, we have created an interactive Total Compensation Calculator. This tool provides a comprehensive view of benefits and more that are offered to prospective employees. The Total Compensation Calculator and other applicant resources can be found here .
Sep 13, 2024
Full Time
A position in the Missouri National Guard Facilities Division is more than a job, it's a calling. Our maintenance personnel supports soldiers that protect and aid Missourians citizens. Job Location: This position will be located at Ike Skelton Training Site, Jefferson City, MO. Performs skilled locksmith work by installing, maintaining and repairing different types of building locks including cylindrical, unit, mortise and rim, and reload cylinders; cutting new or replacement keys for authorized personnel as requested on Key Request forms; repairing locks on desks, file cabinets, display cases, and similar containers; picking locks for which keys have been lost; repairing or replacing door closure panic hardware or ADA openers; and making emergency repairs of locks as required under emergency conditions. Assists in maintaining Master Key Systems for the Missouri Army National Guard security by keeping accurate records of hardware changes and new lock installations in each building, and repairing, maintaining, and reloading cylinders for locks in the master key system. Aids during renovation of existing or construction of new facilities by determining the requirements for locking devices and systems from blueprints, schematics, or sketches, making recommendations for such systems based upon knowledge of available products, and installing or monitoring the installation of locking devices or systems on renovated or newly constructed facilities. Determines established applicable hardware specifications for locks and locking devices by interpreting hardware schedules, blueprints, plans, sketches, work orders, etc. Ensures that an adequate and appropriate stock of locksmith supplies and equipment is available for use by maintaining an inventory of supplies and equipment including key blanks, lock parts, levers and springs, knobs, and cylinders, preparing requisitions for replacements items as necessary, and storing the supplies and equipment in a secure storage facility. Establishes and maintains effective working relationships with those contacted in the course of work. Contributes to a work environment that encourages knowledge of, respect for, and development of skills to engage with those of other cultures or backgrounds. Contributes to the overall success of the department by performing other essential duties and responsibilities as assigned. We are looking for a self-motivated person with practical experience in the locksmithing field. Minimum Qualifications Valid State Driver’s License Be able to pass a background check. Lack of post-secondary education will not be used as the sole basis denying consideration to any applicant. The State of Missouri offers an excellent benefits package that includes a defined pension plan, generous amounts of leave and holiday time, and eligibility for health insurance coverage. Your total compensation is more than the dollars you receive in your paycheck. To help demonstrate the value of working for the State of Missouri, we have created an interactive Total Compensation Calculator. This tool provides a comprehensive view of benefits and more that are offered to prospective employees. The Total Compensation Calculator and other applicant resources can be found here .
Announcement Number: 47123 Open to all qualified persons. Posted 04/18/2024 Recruiter: MARJALISA ROBERTS Phone: (775)977-5268 Email: mbroberts@doc.nv.gov Applications accepted until recruitment needs are satisfied ** Qualified individuals are encouraged to apply immediately. Lists of eligible candidates will be established and hiring may occur early in the recruiting process. Recruitment will close without notice when a sufficient number of applications are received or a hiring decision has been made. The Position Locksmiths maintain the master key system for a major facility and install and maintain locking devices and systems. Incumbents possess a degree of knowledge and proficiency sufficient to perform advanced-level work and may provide work direction and training to others. Locksmith II will be working under the direct supervision of the Facility Supervisor II. They will have direct contact, working with inmates on a daily basis. Direct responsibilities will include troubleshooting on site problems with locking devices; perform need repairs; cut keys as needed; maintain all locking devices; adjust metal doors for proper operations; install locking devices for new construction; keep a continuous inventory of initial key locations; document changes in location and key patterns; follow procedures/polices regarding security and key control; complete routine preventative maintenance on all locking devices; closely supervise all inmate help. Provide quality and quantity of information and service to co-workers and external customers and display a professional demeanor at all times when interacting with staff and inmates. The State of Nevada is an equal opportunity employer dedicated to building diverse, inclusive, and innovative work environments with employees who reflect our communities and enthusiastically serve them. All applicants are considered without regard to race, color, national origin, religion or belief, age, disability, sex, sexual orientation, gender identity or expression, pregnancy, domestic partnership, genetic information (GINA), or compensation and/or wages. *** THIS RECRUITMENT MAY CLOSE WITHOUT FURTHER NOTICE DEPENDING ON THE NUMBER OF APPLICATIONS RECEIVED. APPLICANTS ARE ENCOURAGED TO APPLY AS SOON AS POSSIBLE*** To see full Class Specifications visit: http://hr.nv.gov/Resources/ClassSpecs/Class_Specifications-9_0/ To Qualify: In order to be qualified, you must meet the following requirements: Education and Experience (Minimum Qualifications) Completion of a recognized locksmith apprenticeship program followed by one year of journey level locksmithing experience; OR one year of experience as a Locksmith I in Nevada State service; OR an equivalent combination of education and experience. Special Requirements A State of Nevada/FBI background check will be required of the selected applicant. Pursuant to NRS 284.4066, this position has been identified as affecting public safety. Persons offered employment in this position must submit to a pre-employment screening for controlled substances. A pre-employment criminal history check and fingerprinting are required. The Examination Application Evaluation Exam The exam will consist of an application evaluation. It is essential that applications include detailed information with time frames regarding education and experience. The most qualified applicants will be contacted by the hiring agency for interview. The hiring agency may require specific skills related testing as part of the interviewing process. INFORMATIONAL LINKS For more information about state employment, visit the following: Division of Human Resource Management: http://hr.nv.gov Public Employees Retirement System: http://www.nvpers.org Public Employees Benefits Program: http://pebp.state.nv.us More Benefits Information: http://nvjobs.nv.gov/Applicants/EB REFER A FRIEND Help us reach qualified candidates! Refer a friend by clicking here: Email Direct Inquiries or Correspondence to: Division of Human Resource Management Northern Nevada 515 East Musser Street, First Floor Carson City, Nevada 89701-4204
Jul 14, 2024
Full Time
Announcement Number: 47123 Open to all qualified persons. Posted 04/18/2024 Recruiter: MARJALISA ROBERTS Phone: (775)977-5268 Email: mbroberts@doc.nv.gov Applications accepted until recruitment needs are satisfied ** Qualified individuals are encouraged to apply immediately. Lists of eligible candidates will be established and hiring may occur early in the recruiting process. Recruitment will close without notice when a sufficient number of applications are received or a hiring decision has been made. The Position Locksmiths maintain the master key system for a major facility and install and maintain locking devices and systems. Incumbents possess a degree of knowledge and proficiency sufficient to perform advanced-level work and may provide work direction and training to others. Locksmith II will be working under the direct supervision of the Facility Supervisor II. They will have direct contact, working with inmates on a daily basis. Direct responsibilities will include troubleshooting on site problems with locking devices; perform need repairs; cut keys as needed; maintain all locking devices; adjust metal doors for proper operations; install locking devices for new construction; keep a continuous inventory of initial key locations; document changes in location and key patterns; follow procedures/polices regarding security and key control; complete routine preventative maintenance on all locking devices; closely supervise all inmate help. Provide quality and quantity of information and service to co-workers and external customers and display a professional demeanor at all times when interacting with staff and inmates. The State of Nevada is an equal opportunity employer dedicated to building diverse, inclusive, and innovative work environments with employees who reflect our communities and enthusiastically serve them. All applicants are considered without regard to race, color, national origin, religion or belief, age, disability, sex, sexual orientation, gender identity or expression, pregnancy, domestic partnership, genetic information (GINA), or compensation and/or wages. *** THIS RECRUITMENT MAY CLOSE WITHOUT FURTHER NOTICE DEPENDING ON THE NUMBER OF APPLICATIONS RECEIVED. APPLICANTS ARE ENCOURAGED TO APPLY AS SOON AS POSSIBLE*** To see full Class Specifications visit: http://hr.nv.gov/Resources/ClassSpecs/Class_Specifications-9_0/ To Qualify: In order to be qualified, you must meet the following requirements: Education and Experience (Minimum Qualifications) Completion of a recognized locksmith apprenticeship program followed by one year of journey level locksmithing experience; OR one year of experience as a Locksmith I in Nevada State service; OR an equivalent combination of education and experience. Special Requirements A State of Nevada/FBI background check will be required of the selected applicant. Pursuant to NRS 284.4066, this position has been identified as affecting public safety. Persons offered employment in this position must submit to a pre-employment screening for controlled substances. A pre-employment criminal history check and fingerprinting are required. The Examination Application Evaluation Exam The exam will consist of an application evaluation. It is essential that applications include detailed information with time frames regarding education and experience. The most qualified applicants will be contacted by the hiring agency for interview. The hiring agency may require specific skills related testing as part of the interviewing process. INFORMATIONAL LINKS For more information about state employment, visit the following: Division of Human Resource Management: http://hr.nv.gov Public Employees Retirement System: http://www.nvpers.org Public Employees Benefits Program: http://pebp.state.nv.us More Benefits Information: http://nvjobs.nv.gov/Applicants/EB REFER A FRIEND Help us reach qualified candidates! Refer a friend by clicking here: Email Direct Inquiries or Correspondence to: Division of Human Resource Management Northern Nevada 515 East Musser Street, First Floor Carson City, Nevada 89701-4204
State of Missouri
Pacific, Missouri, United States
A position in the Missouri Department of Corrections is more than a job. It's a calling. Corrections employees transform lives, equipping Missourians in the criminal justice system with the skills they need to contribute to their communities, inside and outside our walls. More than 95 percent of people who enter the prison system ultimately are released. We want to make sure they’re good neighbors. We offer great benefits!Missouri State Employee Retirement System / Deferred compensation plan / Health insurance (medical, vision, dental for employees and family) / Paid life insurance / Long-term disability insurance / Cafeteria plan / Paid holidays / 10 hours annual leave per month / 10 hours sick leave per month / Uniforms provided when required / Pre-service and in-service training / Access to credit union / Direct deposit of paycheck (required) / Employee health, wellness and safety initiatives / MOST 529 College Savings Program Opens/repairs locks using hand tools and special equipment; checks for proper operation of locking devices; disassembles padlocks/safe locks/door locks; repairs or replaces worn pins/springs/other parts; adjusts pin length; inserts new or repaired pins into locks to change combination; fabricates new or duplicate keys using key cutting machine; installs locks and strike plates Maintains and repairs a variety of mechanical and electrical locks/door closures/associated structures; prepares and maintains a file of installed locks and a list of doors that are keyed together or separately; prepares and maintains a list of personnel assigned keys to facility locks; maintains equipment/supply inventory Exercises independence and initiative in the performance of responsibilities; receives general administrative direction; performs other related work as assigned Minimum Qualifications: 4-6 years of experience / on-the-job training in the trade area. Preferred Qualifications/Skills: One or more years of experience involving the installation, repair, and rebuilding of locks. All requested documents MUST be received by the closing date listed. Some positions are eligible for a shift differential of $173.34 semi-monthly, which is provided to employees with shifts that begin on or between 12:00pm (noon) and 5:00am, and who work at a 24/7 worksite (i.e. institution, transition center, supervision center, or command center), or whose work requires regular visits to these locations. If selected for interview, eligibility may be discussed at that time with the hiring manager. The Department of Corrections is the only State agency that currently offers a guaranteed 1% pay increase for every two years of service up to 20 years! The Missouri Department of Corrections is proud to have a tradition of promotion from within for employees looking for and seeking distinctive career paths. As you work for the department, we invite you to consider your goals and make choices to actively head toward them. We seek to recognize employees who serve with distinction.
Sep 10, 2024
Full Time
A position in the Missouri Department of Corrections is more than a job. It's a calling. Corrections employees transform lives, equipping Missourians in the criminal justice system with the skills they need to contribute to their communities, inside and outside our walls. More than 95 percent of people who enter the prison system ultimately are released. We want to make sure they’re good neighbors. We offer great benefits!Missouri State Employee Retirement System / Deferred compensation plan / Health insurance (medical, vision, dental for employees and family) / Paid life insurance / Long-term disability insurance / Cafeteria plan / Paid holidays / 10 hours annual leave per month / 10 hours sick leave per month / Uniforms provided when required / Pre-service and in-service training / Access to credit union / Direct deposit of paycheck (required) / Employee health, wellness and safety initiatives / MOST 529 College Savings Program Opens/repairs locks using hand tools and special equipment; checks for proper operation of locking devices; disassembles padlocks/safe locks/door locks; repairs or replaces worn pins/springs/other parts; adjusts pin length; inserts new or repaired pins into locks to change combination; fabricates new or duplicate keys using key cutting machine; installs locks and strike plates Maintains and repairs a variety of mechanical and electrical locks/door closures/associated structures; prepares and maintains a file of installed locks and a list of doors that are keyed together or separately; prepares and maintains a list of personnel assigned keys to facility locks; maintains equipment/supply inventory Exercises independence and initiative in the performance of responsibilities; receives general administrative direction; performs other related work as assigned Minimum Qualifications: 4-6 years of experience / on-the-job training in the trade area. Preferred Qualifications/Skills: One or more years of experience involving the installation, repair, and rebuilding of locks. All requested documents MUST be received by the closing date listed. Some positions are eligible for a shift differential of $173.34 semi-monthly, which is provided to employees with shifts that begin on or between 12:00pm (noon) and 5:00am, and who work at a 24/7 worksite (i.e. institution, transition center, supervision center, or command center), or whose work requires regular visits to these locations. If selected for interview, eligibility may be discussed at that time with the hiring manager. The Department of Corrections is the only State agency that currently offers a guaranteed 1% pay increase for every two years of service up to 20 years! The Missouri Department of Corrections is proud to have a tradition of promotion from within for employees looking for and seeking distinctive career paths. As you work for the department, we invite you to consider your goals and make choices to actively head toward them. We seek to recognize employees who serve with distinction.
MASSACHUSETTS TRIAL COURT
Salem, Massachusetts, United States
Title: Senior Maintenance Technician- Salem Pay Grade: Grade 13 Starting Pay: $54,593.18/Yr. Departmental Mission Statement: The Facilities Management Department of Trial Court provides for the management and maintenance of 63 state-owned courthouses located in ten counties of the Commonwealth. The Department is committed to administering effective property management, and for ensuring the delivery of quality services necessary for the efficient and reliable operation of all of the facilities which it maintains. FACILITES MANAGEMENT & CAPITAL PLANNING ORGANIZATIONAL PROFILE: Notes: Candidate must be licensed as an Electrician, HVAC or a Plumber. The hours for this position is 6am-2pm. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. This position may have occasional travel. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. Position Summary: This series is responsible for performing the full range of skilled trade position duties for both licensed and unlicensed trades. Typical duties include repairing, installing and testing various types of systems and equipment. These positions may also frequently include the application of complex materials and compounds consistent with general contracting work. The title above the entry level requires the performance of increasingly more responsible and varied work which requires advanced skill and experience with regard to the various licensed and unlicensed trades. Employees are appointed at the entry level position title and are eligible for reclassification to a higher level position within this series consistent with the specifications for the higher level position title. The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Reports to a Facilities Supervisor performing structured but not always routine work; Moderate judgment is required. Senior Maintenance Tech I (13) - This is the entry level position within this series. Employees at this level are expected to perform plumbing, electrical, carpentry, HVAC, painting, and other trades and technical work in their area of expertise. Employees are expected to have an established area specialization developed through training and experience and can work independently. Senior Maintenance Tech II (14) - This is the second level within the series. These employees are generally involved in projects of a larger scope and complexity consistent with experience and training. The Senior Maintenance Tech II engages in more complex project assignments and has a higher degree of contact with court officials. Senior Maintenance Tech IIs take lead roles in the completion of projects. Employees are required to work a minimum of three years as a Senior Maintenance Tech I before being eligible to reclassify to the higher level. Senior Maintenance Tech II positions also require the employee to hold a trade or technical license if applicable in their area of specialization prior to applying for reclassification. Senior Maintenance Technician Duties: The following list of major duties represents a composite list of typical duties performed by individuals in various areas of specialization. Specific duties performed by an incumbent will vary depending upon the Division, designated assignment, and level of the employee. All positions may perform related duties as required. Carpenter Maintains buildings and related structures applying carpentry techniques and using carpentry tools to construct, alter, repair and/or install walls, stairs, floors, ceilings, windows, doors, roofs, gutters, locks, air-conditioners, handicapped chair rails and ramps, shelving, etc. Inspect buildings needing carpentry repair or alterations, estimates job duration and the cost and/or quantities of labor and materials needed to complete the job. Interprets and/or draws up sketches, patterns, blueprints, instructions and/or layouts of work to be done. Perform structural repair, alteration or improvement work such as lowering ceilings and paneling rooms; preparing surfaces for plaster or cement work; studding, wiring and plastering walls and cracks in floors or around windows; taping joints on sheetrock; and pre-cementing and/or replacing formica tops. Confers with various department heads or managers regarding handling of emergencies, the feasibility of performing repair or alterations and the scheduling of work. Performs related work such as framing pictures; making window and door screens; drilling holes in signs; ordering materials and supplies and cleaning; and sharpening and tempering various tools and equipment. Electrician Tests, repairs, installs and /or maintains various types of electrical systems and equipment by operating the appropriate equipment and tools to ensure proper maintenance and functioning of necessary equipment. Troubleshoots electrical and related equipment using necessary electrical equipment and by reading schematics, diagrams and outlines to identify and correct operational problems. Maintain an adequate inventory of equipment and materials. Elevator Repairperson The following list of major duties represents a composite list of typical duties performed by individuals in this position. Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division. Inspects and tests elevators and related machinery to ensure that they meet legal operating requirements. Review plans and specifications for proposed installations or alterations of elevators and related machinery. Test elevators to ensure the receipt of certificates of inspections. Provide technical assistance by responding orally or in writing to inquiries. Perform periodic inspections in compliance with public safety requirements. Coordinates and schedules inspections with other agencies and contractors maintaining personal logs, compiles statistical data and represents the agency at hearing or meetings. HVAC Technician Installs, repairs, alters and maintains existing heating, venting and air conditioning (HVAC) equipment and systems. Troubleshoots HVAC equipment and systems. Run standard tests to determine whether finished work meets specifications. Inspect facility to determine the need for maintenance and repair to HVAC equipment. Establish priorities and make recommendations concerning work activities. Locksmith Install lock devices in doors, desks, office equipment and other units. Repairs and/or overhauls locking devices such as mortise, rim, key-in-the knob locks, dead bolt, office equipment, padlocks and emergency exit locks by repairing for replacing worn tumblers, springs or other parts of locking devices; by making alterations to locking mechanisms and units; and/or by replacing escutcheons and face plates on doors to change the size of existing holes to assure correct Fitchburg District Court. Repairs and/or installs locks containing dual locking capabilities by reworking locking devices designed to work in conjunction with other components and equipment to form a complete security or surveillance system. Changes lock combinations by inserting new or repaired tumblers into locks in order to increase security. Mason/Plasterer Lays brick, stone and cement blocks using a variety of hand and power tools such as brick or napping hammer, brick or shill saw, pick, chisel and hammer to build, alter, repair and /or maintain brick and/or concrete surfaces and structures such as sidewalks, partitions, floors, chimneys, etc. Plasters walls and ceilings. Prepare surfaces for plastering or cement work. Pours concrete in molds or forms to make slabs or blocks .Erects and dismantles scaffolding, riggings, and/or ladders. Reads instructions and interprets blueprints and sketches to determine work to be done. Repairs masonry and walls by patching with cement or plaster. Tape joints on sheetrock Perform related duties such as caulking and waterproofing cracks in walls and floors; coring holes through cement or marble floors; cleaning tools and equipment; laying-out cement or marble floors; cleaning tools and equipment; laying-out drop cloths; studding, wiring, and plastering door and window openings, etc. Order materials and supplies. Repair and maintain power tools to ensure proper operation. Painter Applies paints, varnish, and/or stains to all types of surfaces(e.g. wood, metal, plaster, etc.) In order to protect and beautify such surfaces using appropriate utensils and equipment such as paint spraying machines. Prepares surfaces for painting using appropriate tools, equipment and techniques. Selects the types and color of paints, varnish or stain and mixes, blends and prepares the same for proper color match. Erects, repairs, maintains and operates staging, and scaffolding following accepted safety practices in order to gain access to areas needing painting. Estimates length of time, cost and quantities of materials and manpower needed to complete a job. Operates, cleans and maintains hand and power tools, air compressors and painting equipment. Confers with supervisors and department heads regarding the scheduling of work, the handling of emergencies and the feasibility of installing painting equipment and materials in the area in order to ensure that needs of the agency are met expeditiously and at a convenient time. Prepares surfaces for plaster or cement work by taping joints on sheetrock, caulking and waterproofing walls and cracks in floors, etc. by using appropriate tools and equipment. Performs related duties such as preparing various reports; maintaining records and files; setting up signs and barricades; reading instructions on lay-outs; removing and replacing glass; drilling holes in signs; printing letters and signs; laying out drop cloths; and moving office furniture. Based on assignment, may operate road-line painting machines and sand blasting equipment. Read and/or interpret blueprints, sketches, instructions or layouts to understand work to be done. Plumber Install, repairs, and alters steam plumbing systems. Reads and interprets blueprints, sketches, instructions or layouts to understand construction work to be done. Schedules installation, maintenance, and/or repair work by conferring with supervisors and other department personnel to determine location of equipment and appropriate time to complete the project. Estimates length of time, cost of materials and manpower needed to develop a project budget. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas: Ethics and Values Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. Mission Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. Problem Solving Accurately assesses maintenance problems of a routine nature and initiates corrective action. Continuous Learning Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. Commitment to Diversity Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. Customer Service Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. Collaboration Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Senior Maintenance Technician: A high school diploma or equivalent; and, the following required experience and abilities in one or more of the following skilled trades or areas of specialization: Carpenter: Must have at least four years of full-time experience in carpentry, woodworking or cabinet-making work or a combination of two years' experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the principles and techniques of carpentry. Knowledge of the types of building structures. Knowledge of the types of material used in carpentry. Knowledge of the types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging, etc. Knowledge and skill in the types and uses of small hand held tools such as hammers, saws, screwdrivers, chisels, drills, etc. Knowledge and skill in the types and uses of tools used in carpentry bench work. Knowledge and skill in the types and uses of small measurement devices such as power saws, power drills, power hammers, etc. Electrician: Possession of a current and valid Massachusetts journeyman electrician's license issued by the Board of State Examiners of Electricians. Knowledge of state and local electrical codes. Knowledge of inspection techniques used in the electrical trade. Knowledge of safety practices and precautions observed in the electrical trade. Ability to follow oral and written instructions. Ability to perform arithmetical computations with speed and accuracy. Ability to climb and work from ladders and scaffolds. Elevator Repairperson: Possession of a current and valid License as an Maintenance Man and Repairman issued by the Massachusetts Dept. of Public Safety. Knowledge of the principles of operations of elevators, escalators, and hoisting systems. Knowledge of the methods followed in the repair and maintenance of elevators and related machinery. Knowledge of safety practices and procedures followed in connection with maintenance. Skill in the operation of freight and passenger elevators and related machinery. Ability to understand and apply the laws, rules, regulations, policies, procedures, specifications, standards, and guidelines governing elevators and related machinery. Ability to read and interpret such documents as technical and equipment operation manuals, plans, specifications, blueprints, etc. HVAC Technician: Possession of a current and valid Massachusetts journeyman license in a related field or an equivalent combination of education and experience. Experience in interpreting blueprints and plans, estimating costs for renovations, maintenance/repair of HVAC systems. Experience in the use and operation of power tools and other equipment. Knowledge of the laws, rules, and regulations governing HVAC systems. Knowledge of state building codes. Ability to follow written and oral instructions. Ability to perform arithmetical computations with speed and accuracy. Locksmith: Must have at least four years of full-time experience in locksmithing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the methods and techniques used in installing and repair of lock or lock assemblies. Knowledge of the types and uses of small hand tools and uses of precision measuring equipment. Skill in the methods and techniques of making and cutting keys. Ability to exercise discretion in handling confidential information. Ability to maintain accurate records. Ability to follow written and oral instructions. Ability to read and interpret such documents as plans, specifications, blueprints, etc Mason/Plasterer: Must have at least (2) two years of full-time experience as stonemason, marble setter, bricklayer or plaster, or any combination of the required experience. A diploma or certificate from a recognized trade or vocational school, may be substituted for a maximum of one year of experience. Knowledge of standard practices, methods and techniques of masonry. Knowledge of the types and uses of materials used in masonry such as brick, stone, sand, etc. Knowledge of the types and uses of equipment used in masonry such as portable mixers, etc. Knowledge and skill in the types and uses of small hand tools used in masonry such as spades, chisels, trowels, etc. Knowledge of types of masonry bonds. Knowledge of types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging. Skills in the use of masonry equipment such as portable mixers. Ability to follow written instructions. Ability to read and interpret documents such as plans, blueprints, drawings, etc. Ability to climb and work from ladders and scaffolds. Painter: Must have at least three years of full-time experience in painting work or a combination of two year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the practices and techniques of painting. Knowledge of the types and uses of painting materials such as paint, varnishes, and stains. Knowledge of the types of finishes used in painting. Knowledge of the methods of preparation of wood, metal, glass, plaster, cement, and other materials and surfaces for painting. Knowledge of chemical solvents used to prepare surfaces for painting and cleanup. Ability to climb and work from ladders and scaffolds. Knowledge and skill in the types and uses of painting tools such as brushes, rollers, spray machine guns, etc. Knowledge and skill in the types and uses of small hand held tools and power tools such as chisels, drills, power saws, etc. Knowledge of the properties and characteristics of wood. Knowledge of the practices and techniques of mixing and matching paints. Knowledge of the types and uses of safety or climbing equipment used in painting such as scaffolds and ladders. Skill in applying paints and other finishes by brush, cloth, air gun, etc. Skill in using painting equipment such as hand and power-operated paint chippers, sand blasting equipment, etc. Plumber: Possession of a current and valid Massachusetts journeyman plumber's license issued by the Board of State Examiners of Plumbers and Gas Fitters. Knowledge of laws, rules, and regulations governing plumbing. Ability to follow oral and written instructions. Ability to lift and carry heavy objects. Physical stamina and endurance. Ability to maintain accurate records. Roofer: Must have at least two years of full-time experience in roofing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the types and uses of small measurement devices, hand held power tools, and equipment used in roofing. Knowledge of safety practices and procedures followed in roofing. Knowledge of the types and uses of materials used in roofing. Knowledge of the safety practices, methods and techniques of roofing. Skill in the use of small measurement devices, hand held power tools, and equipment used in roofing. Ability to climb and work from ladders and scaffold Closing Date/Time: 2024-12-17
Sep 07, 2024
Full Time
Title: Senior Maintenance Technician- Salem Pay Grade: Grade 13 Starting Pay: $54,593.18/Yr. Departmental Mission Statement: The Facilities Management Department of Trial Court provides for the management and maintenance of 63 state-owned courthouses located in ten counties of the Commonwealth. The Department is committed to administering effective property management, and for ensuring the delivery of quality services necessary for the efficient and reliable operation of all of the facilities which it maintains. FACILITES MANAGEMENT & CAPITAL PLANNING ORGANIZATIONAL PROFILE: Notes: Candidate must be licensed as an Electrician, HVAC or a Plumber. The hours for this position is 6am-2pm. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. This position may have occasional travel. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. Position Summary: This series is responsible for performing the full range of skilled trade position duties for both licensed and unlicensed trades. Typical duties include repairing, installing and testing various types of systems and equipment. These positions may also frequently include the application of complex materials and compounds consistent with general contracting work. The title above the entry level requires the performance of increasingly more responsible and varied work which requires advanced skill and experience with regard to the various licensed and unlicensed trades. Employees are appointed at the entry level position title and are eligible for reclassification to a higher level position within this series consistent with the specifications for the higher level position title. The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Reports to a Facilities Supervisor performing structured but not always routine work; Moderate judgment is required. Senior Maintenance Tech I (13) - This is the entry level position within this series. Employees at this level are expected to perform plumbing, electrical, carpentry, HVAC, painting, and other trades and technical work in their area of expertise. Employees are expected to have an established area specialization developed through training and experience and can work independently. Senior Maintenance Tech II (14) - This is the second level within the series. These employees are generally involved in projects of a larger scope and complexity consistent with experience and training. The Senior Maintenance Tech II engages in more complex project assignments and has a higher degree of contact with court officials. Senior Maintenance Tech IIs take lead roles in the completion of projects. Employees are required to work a minimum of three years as a Senior Maintenance Tech I before being eligible to reclassify to the higher level. Senior Maintenance Tech II positions also require the employee to hold a trade or technical license if applicable in their area of specialization prior to applying for reclassification. Senior Maintenance Technician Duties: The following list of major duties represents a composite list of typical duties performed by individuals in various areas of specialization. Specific duties performed by an incumbent will vary depending upon the Division, designated assignment, and level of the employee. All positions may perform related duties as required. Carpenter Maintains buildings and related structures applying carpentry techniques and using carpentry tools to construct, alter, repair and/or install walls, stairs, floors, ceilings, windows, doors, roofs, gutters, locks, air-conditioners, handicapped chair rails and ramps, shelving, etc. Inspect buildings needing carpentry repair or alterations, estimates job duration and the cost and/or quantities of labor and materials needed to complete the job. Interprets and/or draws up sketches, patterns, blueprints, instructions and/or layouts of work to be done. Perform structural repair, alteration or improvement work such as lowering ceilings and paneling rooms; preparing surfaces for plaster or cement work; studding, wiring and plastering walls and cracks in floors or around windows; taping joints on sheetrock; and pre-cementing and/or replacing formica tops. Confers with various department heads or managers regarding handling of emergencies, the feasibility of performing repair or alterations and the scheduling of work. Performs related work such as framing pictures; making window and door screens; drilling holes in signs; ordering materials and supplies and cleaning; and sharpening and tempering various tools and equipment. Electrician Tests, repairs, installs and /or maintains various types of electrical systems and equipment by operating the appropriate equipment and tools to ensure proper maintenance and functioning of necessary equipment. Troubleshoots electrical and related equipment using necessary electrical equipment and by reading schematics, diagrams and outlines to identify and correct operational problems. Maintain an adequate inventory of equipment and materials. Elevator Repairperson The following list of major duties represents a composite list of typical duties performed by individuals in this position. Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division. Inspects and tests elevators and related machinery to ensure that they meet legal operating requirements. Review plans and specifications for proposed installations or alterations of elevators and related machinery. Test elevators to ensure the receipt of certificates of inspections. Provide technical assistance by responding orally or in writing to inquiries. Perform periodic inspections in compliance with public safety requirements. Coordinates and schedules inspections with other agencies and contractors maintaining personal logs, compiles statistical data and represents the agency at hearing or meetings. HVAC Technician Installs, repairs, alters and maintains existing heating, venting and air conditioning (HVAC) equipment and systems. Troubleshoots HVAC equipment and systems. Run standard tests to determine whether finished work meets specifications. Inspect facility to determine the need for maintenance and repair to HVAC equipment. Establish priorities and make recommendations concerning work activities. Locksmith Install lock devices in doors, desks, office equipment and other units. Repairs and/or overhauls locking devices such as mortise, rim, key-in-the knob locks, dead bolt, office equipment, padlocks and emergency exit locks by repairing for replacing worn tumblers, springs or other parts of locking devices; by making alterations to locking mechanisms and units; and/or by replacing escutcheons and face plates on doors to change the size of existing holes to assure correct Fitchburg District Court. Repairs and/or installs locks containing dual locking capabilities by reworking locking devices designed to work in conjunction with other components and equipment to form a complete security or surveillance system. Changes lock combinations by inserting new or repaired tumblers into locks in order to increase security. Mason/Plasterer Lays brick, stone and cement blocks using a variety of hand and power tools such as brick or napping hammer, brick or shill saw, pick, chisel and hammer to build, alter, repair and /or maintain brick and/or concrete surfaces and structures such as sidewalks, partitions, floors, chimneys, etc. Plasters walls and ceilings. Prepare surfaces for plastering or cement work. Pours concrete in molds or forms to make slabs or blocks .Erects and dismantles scaffolding, riggings, and/or ladders. Reads instructions and interprets blueprints and sketches to determine work to be done. Repairs masonry and walls by patching with cement or plaster. Tape joints on sheetrock Perform related duties such as caulking and waterproofing cracks in walls and floors; coring holes through cement or marble floors; cleaning tools and equipment; laying-out cement or marble floors; cleaning tools and equipment; laying-out drop cloths; studding, wiring, and plastering door and window openings, etc. Order materials and supplies. Repair and maintain power tools to ensure proper operation. Painter Applies paints, varnish, and/or stains to all types of surfaces(e.g. wood, metal, plaster, etc.) In order to protect and beautify such surfaces using appropriate utensils and equipment such as paint spraying machines. Prepares surfaces for painting using appropriate tools, equipment and techniques. Selects the types and color of paints, varnish or stain and mixes, blends and prepares the same for proper color match. Erects, repairs, maintains and operates staging, and scaffolding following accepted safety practices in order to gain access to areas needing painting. Estimates length of time, cost and quantities of materials and manpower needed to complete a job. Operates, cleans and maintains hand and power tools, air compressors and painting equipment. Confers with supervisors and department heads regarding the scheduling of work, the handling of emergencies and the feasibility of installing painting equipment and materials in the area in order to ensure that needs of the agency are met expeditiously and at a convenient time. Prepares surfaces for plaster or cement work by taping joints on sheetrock, caulking and waterproofing walls and cracks in floors, etc. by using appropriate tools and equipment. Performs related duties such as preparing various reports; maintaining records and files; setting up signs and barricades; reading instructions on lay-outs; removing and replacing glass; drilling holes in signs; printing letters and signs; laying out drop cloths; and moving office furniture. Based on assignment, may operate road-line painting machines and sand blasting equipment. Read and/or interpret blueprints, sketches, instructions or layouts to understand work to be done. Plumber Install, repairs, and alters steam plumbing systems. Reads and interprets blueprints, sketches, instructions or layouts to understand construction work to be done. Schedules installation, maintenance, and/or repair work by conferring with supervisors and other department personnel to determine location of equipment and appropriate time to complete the project. Estimates length of time, cost of materials and manpower needed to develop a project budget. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas: Ethics and Values Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. Mission Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. Problem Solving Accurately assesses maintenance problems of a routine nature and initiates corrective action. Continuous Learning Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. Commitment to Diversity Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. Customer Service Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. Collaboration Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Senior Maintenance Technician: A high school diploma or equivalent; and, the following required experience and abilities in one or more of the following skilled trades or areas of specialization: Carpenter: Must have at least four years of full-time experience in carpentry, woodworking or cabinet-making work or a combination of two years' experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the principles and techniques of carpentry. Knowledge of the types of building structures. Knowledge of the types of material used in carpentry. Knowledge of the types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging, etc. Knowledge and skill in the types and uses of small hand held tools such as hammers, saws, screwdrivers, chisels, drills, etc. Knowledge and skill in the types and uses of tools used in carpentry bench work. Knowledge and skill in the types and uses of small measurement devices such as power saws, power drills, power hammers, etc. Electrician: Possession of a current and valid Massachusetts journeyman electrician's license issued by the Board of State Examiners of Electricians. Knowledge of state and local electrical codes. Knowledge of inspection techniques used in the electrical trade. Knowledge of safety practices and precautions observed in the electrical trade. Ability to follow oral and written instructions. Ability to perform arithmetical computations with speed and accuracy. Ability to climb and work from ladders and scaffolds. Elevator Repairperson: Possession of a current and valid License as an Maintenance Man and Repairman issued by the Massachusetts Dept. of Public Safety. Knowledge of the principles of operations of elevators, escalators, and hoisting systems. Knowledge of the methods followed in the repair and maintenance of elevators and related machinery. Knowledge of safety practices and procedures followed in connection with maintenance. Skill in the operation of freight and passenger elevators and related machinery. Ability to understand and apply the laws, rules, regulations, policies, procedures, specifications, standards, and guidelines governing elevators and related machinery. Ability to read and interpret such documents as technical and equipment operation manuals, plans, specifications, blueprints, etc. HVAC Technician: Possession of a current and valid Massachusetts journeyman license in a related field or an equivalent combination of education and experience. Experience in interpreting blueprints and plans, estimating costs for renovations, maintenance/repair of HVAC systems. Experience in the use and operation of power tools and other equipment. Knowledge of the laws, rules, and regulations governing HVAC systems. Knowledge of state building codes. Ability to follow written and oral instructions. Ability to perform arithmetical computations with speed and accuracy. Locksmith: Must have at least four years of full-time experience in locksmithing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the methods and techniques used in installing and repair of lock or lock assemblies. Knowledge of the types and uses of small hand tools and uses of precision measuring equipment. Skill in the methods and techniques of making and cutting keys. Ability to exercise discretion in handling confidential information. Ability to maintain accurate records. Ability to follow written and oral instructions. Ability to read and interpret such documents as plans, specifications, blueprints, etc Mason/Plasterer: Must have at least (2) two years of full-time experience as stonemason, marble setter, bricklayer or plaster, or any combination of the required experience. A diploma or certificate from a recognized trade or vocational school, may be substituted for a maximum of one year of experience. Knowledge of standard practices, methods and techniques of masonry. Knowledge of the types and uses of materials used in masonry such as brick, stone, sand, etc. Knowledge of the types and uses of equipment used in masonry such as portable mixers, etc. Knowledge and skill in the types and uses of small hand tools used in masonry such as spades, chisels, trowels, etc. Knowledge of types of masonry bonds. Knowledge of types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging. Skills in the use of masonry equipment such as portable mixers. Ability to follow written instructions. Ability to read and interpret documents such as plans, blueprints, drawings, etc. Ability to climb and work from ladders and scaffolds. Painter: Must have at least three years of full-time experience in painting work or a combination of two year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the practices and techniques of painting. Knowledge of the types and uses of painting materials such as paint, varnishes, and stains. Knowledge of the types of finishes used in painting. Knowledge of the methods of preparation of wood, metal, glass, plaster, cement, and other materials and surfaces for painting. Knowledge of chemical solvents used to prepare surfaces for painting and cleanup. Ability to climb and work from ladders and scaffolds. Knowledge and skill in the types and uses of painting tools such as brushes, rollers, spray machine guns, etc. Knowledge and skill in the types and uses of small hand held tools and power tools such as chisels, drills, power saws, etc. Knowledge of the properties and characteristics of wood. Knowledge of the practices and techniques of mixing and matching paints. Knowledge of the types and uses of safety or climbing equipment used in painting such as scaffolds and ladders. Skill in applying paints and other finishes by brush, cloth, air gun, etc. Skill in using painting equipment such as hand and power-operated paint chippers, sand blasting equipment, etc. Plumber: Possession of a current and valid Massachusetts journeyman plumber's license issued by the Board of State Examiners of Plumbers and Gas Fitters. Knowledge of laws, rules, and regulations governing plumbing. Ability to follow oral and written instructions. Ability to lift and carry heavy objects. Physical stamina and endurance. Ability to maintain accurate records. Roofer: Must have at least two years of full-time experience in roofing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the types and uses of small measurement devices, hand held power tools, and equipment used in roofing. Knowledge of safety practices and procedures followed in roofing. Knowledge of the types and uses of materials used in roofing. Knowledge of the safety practices, methods and techniques of roofing. Skill in the use of small measurement devices, hand held power tools, and equipment used in roofing. Ability to climb and work from ladders and scaffold Closing Date/Time: 2024-12-17
City of Kansas City, MO
Kansas City, Missouri, United States
Full-time position available with the Aviation Department, Charles B. Wheeler Downtown Airport located at 900 NW Richards Rd Salary Range: $20.10-$30.64/hour Normal Work Days/Hours: Monday-Friday, 7:00 a.m.-3:30 p.m.*Mandatory overtime during inclement weather and emergencies. Application Deadline Date: Open Until Filled Responsibilities Assists with maintenance and repairs to the airfield, pavement, structures, systems, infrastructure, and grounds of the airport. Performs duties related to new construction and general carpentry work. Frames, drywalls, trims, paints, installs fixtures and devices as well as makes minor plumbing repairs. Performs masonry, concrete and asphalt crack sealing, patching and repair, concrete flatwork, and repair of stone or block walls. Installs and repairs fences and signs. Performs minor electrical and locksmith repairs. Performs daily inspections, maintenance, repairs, and general upkeep of all machinery, equipment and tools used in airport maintenance. Small engine repair and grounds maintenance to include licensed pesticide application, landscaping, and mowing. Work involves the operation, maintenance, and minor repair of a variety of heavy snow removal equipment, motorized construction and raised platform equipment, and farm implements such as front end loaders, skid loaders, backhoes, boom lifts, dump trucks, heavy duty airfield plow trucks, and large farm tractors. Qualifications REQUIRES completion of a trade school or a shop training program; OR 6 months experience in general maintenance and repair work. May be required to obtain a valid MO Class A,B, or C CDL prior to the end of the probationary period as determined by the department. Must pass a pre-employment drug screen and post-offer physical examination as prescribed by the City. Other Information URGENT!!! CRITICAL RECRUITMENT INFORMATION Applications and/or resumes are evaluated on the information received by the application deadline. Please ensure that your application or resume clearly demonstrates how you meet the minimum qualifications for the position for which you are applying, this includes providing all relevant educational dates and a detailed description of relevant work experience, including months/years of employment. Applications and/or resumes may not be considered if information is incomplete. In order for a resume to be used in lieu of an application the resume must have been submitted online via the City's Applicant Tracking System. Positions requiring a high school diploma/GED certificate must be obtained from a school/program accredited by the Department of Education and recognized by the U.S. Secretary of Education. The minimum education requirement for positions that allow for experience equivalency for an accredited degree is a high school diploma. Unless otherwise specified, an accredited degree must be obtained from a college or university listed with the U.S. Department of Education and recognized by the U.S. Secretary of Education. For positions with a salary grade of EX6 or higher that require an accredited degree, qualifying professional experience must be obtained AFTER the accredited degree is obtained. Successful completion of a pre-employment criminal history/background check is required for all positions. Some positions require a post offer drug screen and/or physical. If appointed, non-residents must obtain residency inside Kansas City, Missouri's city limits within nine months. The City of KCMO is an equal opportunity employer that values diversity and inclusion in the workplace. The City is committed to providing a workplace environment for its employees and citizens free from discrimination based on race, color, sex (including pregnancy), national origin, religion, age, disability, marital status, genetic information, sexual orientation, or gender identity. For more information, please see our EEO Policy The City of KCMO is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call 816-513-1908 or send an e-mail to accommodations@kcmo.org . If claiming military veterans' preference points, you must attach a copy of your DD-214 or a DD-256 (for reservists). To claim veterans' points you must have served 180 days of regular active duty service and be discharged or released under honorable conditions during peacetimes or 90 days of active duty service, one (1) day during "wartime" and a last discharge or release under honorable conditions. (DOD) 38 U.S. Code • 4211).
Jul 14, 2024
Full Time
Full-time position available with the Aviation Department, Charles B. Wheeler Downtown Airport located at 900 NW Richards Rd Salary Range: $20.10-$30.64/hour Normal Work Days/Hours: Monday-Friday, 7:00 a.m.-3:30 p.m.*Mandatory overtime during inclement weather and emergencies. Application Deadline Date: Open Until Filled Responsibilities Assists with maintenance and repairs to the airfield, pavement, structures, systems, infrastructure, and grounds of the airport. Performs duties related to new construction and general carpentry work. Frames, drywalls, trims, paints, installs fixtures and devices as well as makes minor plumbing repairs. Performs masonry, concrete and asphalt crack sealing, patching and repair, concrete flatwork, and repair of stone or block walls. Installs and repairs fences and signs. Performs minor electrical and locksmith repairs. Performs daily inspections, maintenance, repairs, and general upkeep of all machinery, equipment and tools used in airport maintenance. Small engine repair and grounds maintenance to include licensed pesticide application, landscaping, and mowing. Work involves the operation, maintenance, and minor repair of a variety of heavy snow removal equipment, motorized construction and raised platform equipment, and farm implements such as front end loaders, skid loaders, backhoes, boom lifts, dump trucks, heavy duty airfield plow trucks, and large farm tractors. Qualifications REQUIRES completion of a trade school or a shop training program; OR 6 months experience in general maintenance and repair work. May be required to obtain a valid MO Class A,B, or C CDL prior to the end of the probationary period as determined by the department. Must pass a pre-employment drug screen and post-offer physical examination as prescribed by the City. Other Information URGENT!!! CRITICAL RECRUITMENT INFORMATION Applications and/or resumes are evaluated on the information received by the application deadline. Please ensure that your application or resume clearly demonstrates how you meet the minimum qualifications for the position for which you are applying, this includes providing all relevant educational dates and a detailed description of relevant work experience, including months/years of employment. Applications and/or resumes may not be considered if information is incomplete. In order for a resume to be used in lieu of an application the resume must have been submitted online via the City's Applicant Tracking System. Positions requiring a high school diploma/GED certificate must be obtained from a school/program accredited by the Department of Education and recognized by the U.S. Secretary of Education. The minimum education requirement for positions that allow for experience equivalency for an accredited degree is a high school diploma. Unless otherwise specified, an accredited degree must be obtained from a college or university listed with the U.S. Department of Education and recognized by the U.S. Secretary of Education. For positions with a salary grade of EX6 or higher that require an accredited degree, qualifying professional experience must be obtained AFTER the accredited degree is obtained. Successful completion of a pre-employment criminal history/background check is required for all positions. Some positions require a post offer drug screen and/or physical. If appointed, non-residents must obtain residency inside Kansas City, Missouri's city limits within nine months. The City of KCMO is an equal opportunity employer that values diversity and inclusion in the workplace. The City is committed to providing a workplace environment for its employees and citizens free from discrimination based on race, color, sex (including pregnancy), national origin, religion, age, disability, marital status, genetic information, sexual orientation, or gender identity. For more information, please see our EEO Policy The City of KCMO is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call 816-513-1908 or send an e-mail to accommodations@kcmo.org . If claiming military veterans' preference points, you must attach a copy of your DD-214 or a DD-256 (for reservists). To claim veterans' points you must have served 180 days of regular active duty service and be discharged or released under honorable conditions during peacetimes or 90 days of active duty service, one (1) day during "wartime" and a last discharge or release under honorable conditions. (DOD) 38 U.S. Code • 4211).
CSU, Sacramento
6000 J Street, Sacramento, CA 95819, USA
Working Title: Facilities Worker II Classification Title: Facilities Worker II Posting Details Priority Application Deadline (Posting will remain open until filled): Sunday, June 9, 2024 @ 11:55pm PST Hiring Preference Not Applicable Position Summary The Facilities Worker II works under the lead work direction of the Facilities Project Supervisor and provides facilities repair and maintenance support to all residence halls. This position performs a wide range of more complex semi-skilled and basic skilled facilities and systems maintenance but doesn't require full journey-level skills. The Facilities Worker Il is trained in specific trade tasks which require a broader knowledge in several trades and a basic knowledge of theories, codes, procedures and general trade practices in applicable trade areas. The incumbent will work under the direction of a skilled crafts worker (Facilities Mechanic or more senior Facilities worker II) on the more complex, trade related assignments such as installing faucets and flush valves; soldering pipe; replacing lighting ballasts; pulling wire. FLSA : Non-Exempt (Eligible for overtime compensation) Anticipated Hiring Range : $5,457 per month - $5,750 per m onth; commensurate with candidate's education, experience, skills, and training CSU Classification Salary Range : $5,457 per month - $6,859 per month Best-in-class Benefits : Click here to learn more CSU Total Compensation : Click here to learn more Salary Grade/Range : 1 Recruitment Type : Regular (Probationary) Time Base : Full-Time Pay Plan : 12 months Work Hours : 2:30pm - 11:00pm with split weekends . Work hours may vary depending on department need. Department Information Facilities Management is the steward for the university buildings, infrastructure, grounds and landscape. We perform maintenance and renovation to facilities, plan and manage new building construction and support the Redefine the Possible initiative through our commitment to building a welcoming campus and by creating a dynamic physical environment for students, faculty, staff, and the community. For more information please visit: https://www.csus.edu/student-life/housing/ Minimum Qualifications Knowledge: In addition to knowledge required of the Facilities Worker I, the Facilities Worker II must possess a more comprehensive knowledge of specific methods, practices and tools related to facilities and systems maintenance and repair in areas such as plumbing, HVAC, electrical, carpentry, painting and mechanical systems; semi-skilled and basic skilled knowledge across multiple trades; general knowledge of applicable trade safety practices; working knowledge of building codes; and basic knowledge of electrical theory and mechanical principles. Abilities: In addition to the abilities required of the Facilities Worker I, the Facilities Worker II must demonstrate semi-skilled and basic trade proficiency in multiple trade and maintenance tasks. Experience: In addition to the experience required of the Facilities Worker I, the abilities of the Facilities Worker II normally would be acquired through any combination of experience and training equivalent to three years of hands-on experience in general facilities and systems maintenance and repair, or comparable experience as a trades assistant or laborer with demonstrated proficiency in the required duties. Required Qualifications Experience: Experience in installation of electrical, plumbing and/or HVAC equipment. Experience in performing a wide range of complex facilities and systems maintenance, repair work and preventative maintenance tasks (i.e. sanding and patching drywall, furniture and closet repairs, window and door repair and basic locksmith maintenance). Experience interpreting drawings and blueprints. Experience in analyzing and troubleshooting problems across multiple trade functions. Knowledge/Skills /Abilities: Ability to provide excellent customer service in a diverse environment. Ability to work independently as well as collaboratively in a team environment. Ability to use a computerized maintenance management system. Strong verbal communication skills and ability to use two-way radios for communication. Commitment to maintaining a welcoming and inclusive work environment with diverse colleagues and constituents including faculty, students, staff, and members of the community. Physical Requirements: Ability to occasionally lift and carry up to 50 lbs. (e.g. materials, tools, equipment) Work Schedule Requirements: Ability to work 2 nd shift 2:30 PM - 11:30 PM with split weekends. License/ Other: Must possess and maintain a valid Driver’s License, and maintain a safe driving record. Conditions of Employment: Ability to pass a background check Preferred Qualifications Working knowledge of computerized maintenance management system for data entry. Experience working in a higher education environment. Required Licenses/Certifications Must possess and maintain a valid Driver’s License, and maintain a safe driving record. Documents Needed to Apply Resume and Cover Letter Failure to upload required documents to the online application may result in disqualification. About Sacramento State Sacramento State is located in the heart of California’s capital city, five miles from State Capitol. The lush, 300-acre campus is situated along the American River, close to numerous bike trails and other recreational areas. Sacramento, also known as the “Farm-to-Fork Capital,” is one of the most ethnically diverse and livable cities in the country, with a population of half of a million. Sacramento State is a Hispanic and AANAPISI serving institution with about 31,000 students coming not only from the Greater Sacramento Region, but also from across the state, country, and world. Our 1,800 faculty and 1,500 staff are committed to meeting our mission: “As California’s capital university, we transform lives by preparing students to lead, serve, and succeed. Sacramento State will be a welcoming, caring, and inclusive leader in education, innovation, and engagement.” As the regional hub of higher education, Sacramento State is dedicated to learning and student success ; teaching, research, scholarship and creative activity ; justice, diversity, equity and inclusion ; resource development and sustainability ; dedicated community engagement , and wellness and safety . As evidenced by the values embedded in our Hornet Honor Code , Sacramento State is committed to creating an inclusive environment where all faculty, staff, students, and guests are welcome and valued. Our commitment is more than simply ensuring that our campus is free from bias and discrimination, but is one devoted to celebrating many diverse identities, life experiences, and perspectives that enrich our community, teaching and learning. To learn more about why you should join the Hornet Family, please visit the Why Sac State? page. Equal Employment Opportunity California State University, Sacramento is an Affirmative Action/Equal Opportunity Employer and has a strong institutional commitment to the principle of diversity in all areas. We consider qualified applicants for employment without regard to race, color, religion, national origin, age, sex, gender identity/expression, sexual orientation, pregnancy, genetic information, medical condition, marital status, veteran status, or disability. Sacramento State hires only those individuals who are lawfully authorized to accept employment in the United States. It is the policy of California State University, Sacramento to provide reasonable accommodations for qualified persons with disabilities who are employees or applicants for employment. If you need a disability related reasonable accommodation as part of the application and/or interviewing process, visit https://www.csus.edu/administration-business-affairs/human-resources/benefits/reasonable-accomodation.html . The University is committed to creating an education and working environment free from discrimination, sexual harassment, sexual violence, domestic violence, dating violence, and stalking. For more information on mandatory training for new employees, visit https://www.csus.edu/administration-business-affairs/human-resources/learning-development/csu-learn.html . Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act and Campus Fire Safety Right-To-know Act Notification: Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act, the current Annual Security Report (ASR) is available for viewing at https://www.csus.edu/clery . The ASR contains the current security and safety-related policy statements, emergency preparedness and evacuation information, crime prevention and sexual assault prevention information, and drug and alcohol prevention programming. The ASR also contains statistics of Clery Act crimes for Sacramento State for the last three (3) calendar years. Paper copies are available upon request at the Police Service Center located in the University Union. Background Check Disclaimer A background check (including a criminal records check) must be completed satisfactorily before any candidate can be offered a position with California State University, Sacramento. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current California State University, Sacramento employees who apply for the position. COVID19 Vaccination Policy Effective May 2023, per the CSU COVID-19 Vaccination Policy , it is strongly recommended that all California State University, Sacramento employees who are accessing office and campus facilities follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications. Out of State Employment Sacramento State University, as part of the CSU system, is a State of California Employer. As such, the University requires all employees (up)on date of hire to reside in the State of California. As of January 1, 2022 the CSU Out-of-State Employment Policy prohibits the hiring of employees to perform CSU-related work outside the state of California. Eligibility Verification Candidate must furnish proof of eligibility to work in the U.S. California State University, Sacramento is not a sponsoring agency for staff and management positions (ie. H-1-B Visa). Note to Applicants: Possession of the minimum qualifications does not guarantee an interview unless required by collective bargaining agreement. Advertised: May 24 2024 Pacific Daylight Time Applications close: Closing Date/Time:
Jul 14, 2024
Working Title: Facilities Worker II Classification Title: Facilities Worker II Posting Details Priority Application Deadline (Posting will remain open until filled): Sunday, June 9, 2024 @ 11:55pm PST Hiring Preference Not Applicable Position Summary The Facilities Worker II works under the lead work direction of the Facilities Project Supervisor and provides facilities repair and maintenance support to all residence halls. This position performs a wide range of more complex semi-skilled and basic skilled facilities and systems maintenance but doesn't require full journey-level skills. The Facilities Worker Il is trained in specific trade tasks which require a broader knowledge in several trades and a basic knowledge of theories, codes, procedures and general trade practices in applicable trade areas. The incumbent will work under the direction of a skilled crafts worker (Facilities Mechanic or more senior Facilities worker II) on the more complex, trade related assignments such as installing faucets and flush valves; soldering pipe; replacing lighting ballasts; pulling wire. FLSA : Non-Exempt (Eligible for overtime compensation) Anticipated Hiring Range : $5,457 per month - $5,750 per m onth; commensurate with candidate's education, experience, skills, and training CSU Classification Salary Range : $5,457 per month - $6,859 per month Best-in-class Benefits : Click here to learn more CSU Total Compensation : Click here to learn more Salary Grade/Range : 1 Recruitment Type : Regular (Probationary) Time Base : Full-Time Pay Plan : 12 months Work Hours : 2:30pm - 11:00pm with split weekends . Work hours may vary depending on department need. Department Information Facilities Management is the steward for the university buildings, infrastructure, grounds and landscape. We perform maintenance and renovation to facilities, plan and manage new building construction and support the Redefine the Possible initiative through our commitment to building a welcoming campus and by creating a dynamic physical environment for students, faculty, staff, and the community. For more information please visit: https://www.csus.edu/student-life/housing/ Minimum Qualifications Knowledge: In addition to knowledge required of the Facilities Worker I, the Facilities Worker II must possess a more comprehensive knowledge of specific methods, practices and tools related to facilities and systems maintenance and repair in areas such as plumbing, HVAC, electrical, carpentry, painting and mechanical systems; semi-skilled and basic skilled knowledge across multiple trades; general knowledge of applicable trade safety practices; working knowledge of building codes; and basic knowledge of electrical theory and mechanical principles. Abilities: In addition to the abilities required of the Facilities Worker I, the Facilities Worker II must demonstrate semi-skilled and basic trade proficiency in multiple trade and maintenance tasks. Experience: In addition to the experience required of the Facilities Worker I, the abilities of the Facilities Worker II normally would be acquired through any combination of experience and training equivalent to three years of hands-on experience in general facilities and systems maintenance and repair, or comparable experience as a trades assistant or laborer with demonstrated proficiency in the required duties. Required Qualifications Experience: Experience in installation of electrical, plumbing and/or HVAC equipment. Experience in performing a wide range of complex facilities and systems maintenance, repair work and preventative maintenance tasks (i.e. sanding and patching drywall, furniture and closet repairs, window and door repair and basic locksmith maintenance). Experience interpreting drawings and blueprints. Experience in analyzing and troubleshooting problems across multiple trade functions. Knowledge/Skills /Abilities: Ability to provide excellent customer service in a diverse environment. Ability to work independently as well as collaboratively in a team environment. Ability to use a computerized maintenance management system. Strong verbal communication skills and ability to use two-way radios for communication. Commitment to maintaining a welcoming and inclusive work environment with diverse colleagues and constituents including faculty, students, staff, and members of the community. Physical Requirements: Ability to occasionally lift and carry up to 50 lbs. (e.g. materials, tools, equipment) Work Schedule Requirements: Ability to work 2 nd shift 2:30 PM - 11:30 PM with split weekends. License/ Other: Must possess and maintain a valid Driver’s License, and maintain a safe driving record. Conditions of Employment: Ability to pass a background check Preferred Qualifications Working knowledge of computerized maintenance management system for data entry. Experience working in a higher education environment. Required Licenses/Certifications Must possess and maintain a valid Driver’s License, and maintain a safe driving record. Documents Needed to Apply Resume and Cover Letter Failure to upload required documents to the online application may result in disqualification. About Sacramento State Sacramento State is located in the heart of California’s capital city, five miles from State Capitol. The lush, 300-acre campus is situated along the American River, close to numerous bike trails and other recreational areas. Sacramento, also known as the “Farm-to-Fork Capital,” is one of the most ethnically diverse and livable cities in the country, with a population of half of a million. Sacramento State is a Hispanic and AANAPISI serving institution with about 31,000 students coming not only from the Greater Sacramento Region, but also from across the state, country, and world. Our 1,800 faculty and 1,500 staff are committed to meeting our mission: “As California’s capital university, we transform lives by preparing students to lead, serve, and succeed. Sacramento State will be a welcoming, caring, and inclusive leader in education, innovation, and engagement.” As the regional hub of higher education, Sacramento State is dedicated to learning and student success ; teaching, research, scholarship and creative activity ; justice, diversity, equity and inclusion ; resource development and sustainability ; dedicated community engagement , and wellness and safety . As evidenced by the values embedded in our Hornet Honor Code , Sacramento State is committed to creating an inclusive environment where all faculty, staff, students, and guests are welcome and valued. Our commitment is more than simply ensuring that our campus is free from bias and discrimination, but is one devoted to celebrating many diverse identities, life experiences, and perspectives that enrich our community, teaching and learning. To learn more about why you should join the Hornet Family, please visit the Why Sac State? page. Equal Employment Opportunity California State University, Sacramento is an Affirmative Action/Equal Opportunity Employer and has a strong institutional commitment to the principle of diversity in all areas. We consider qualified applicants for employment without regard to race, color, religion, national origin, age, sex, gender identity/expression, sexual orientation, pregnancy, genetic information, medical condition, marital status, veteran status, or disability. Sacramento State hires only those individuals who are lawfully authorized to accept employment in the United States. It is the policy of California State University, Sacramento to provide reasonable accommodations for qualified persons with disabilities who are employees or applicants for employment. If you need a disability related reasonable accommodation as part of the application and/or interviewing process, visit https://www.csus.edu/administration-business-affairs/human-resources/benefits/reasonable-accomodation.html . The University is committed to creating an education and working environment free from discrimination, sexual harassment, sexual violence, domestic violence, dating violence, and stalking. For more information on mandatory training for new employees, visit https://www.csus.edu/administration-business-affairs/human-resources/learning-development/csu-learn.html . Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act and Campus Fire Safety Right-To-know Act Notification: Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act, the current Annual Security Report (ASR) is available for viewing at https://www.csus.edu/clery . The ASR contains the current security and safety-related policy statements, emergency preparedness and evacuation information, crime prevention and sexual assault prevention information, and drug and alcohol prevention programming. The ASR also contains statistics of Clery Act crimes for Sacramento State for the last three (3) calendar years. Paper copies are available upon request at the Police Service Center located in the University Union. Background Check Disclaimer A background check (including a criminal records check) must be completed satisfactorily before any candidate can be offered a position with California State University, Sacramento. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current California State University, Sacramento employees who apply for the position. COVID19 Vaccination Policy Effective May 2023, per the CSU COVID-19 Vaccination Policy , it is strongly recommended that all California State University, Sacramento employees who are accessing office and campus facilities follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications. Out of State Employment Sacramento State University, as part of the CSU system, is a State of California Employer. As such, the University requires all employees (up)on date of hire to reside in the State of California. As of January 1, 2022 the CSU Out-of-State Employment Policy prohibits the hiring of employees to perform CSU-related work outside the state of California. Eligibility Verification Candidate must furnish proof of eligibility to work in the U.S. California State University, Sacramento is not a sponsoring agency for staff and management positions (ie. H-1-B Visa). Note to Applicants: Possession of the minimum qualifications does not guarantee an interview unless required by collective bargaining agreement. Advertised: May 24 2024 Pacific Daylight Time Applications close: Closing Date/Time:
Job Summary Mohave County Public Works-Facilities Division is currently recruiting for the position of a Facility/Grounds Worker located at Kingman, AZ. ** M-F 7:30am-4pm ** “Hiring salary is $18.22 - $19.91 - DOQ. ” This is the entry level class in the Facility/Grounds Worker series. Positions are normally filled by advancement from the Trades Helper level or, when filled from outside, requires prior general maintenance experience and will be involved in maintaining, repairing and modifying county-owned buildings, facilities, parks, and grounds. REPORTS TO Work is performed under general supervision of a higher level of authority. SUPERVISION EXERCISED None Essential Job Functions Performs a variety of construction and maintenance work including, carpentry, heating, electrical, plumbing, cement finishing, painting, and welding in the maintenance and repair of buildings. Alters and repairs buildings, park equipment, floors, roofs, walls, and related structures. Installs repairs and alters electrical installations, components and equipment. Performs preventive maintenance of same. Set forms, pours, and finishes concrete floors and structures. Paints and refinishes interior and exterior walls, ceilings, and surfaces. Estimates, performs cost comparisons, selects, and requisitions appropriate materials to complete work assignments. Picks up and delivers materials and supplies to job site. Plans and completes work assignments in accordance with blueprints, diagrams, specifications, oral and written instructions in accordance with the standard procedures and safety precautions of the trade. Utilizes a variety of maintenance and grounds keeping equipment and mechanical hand and power tools in performing work assignments. Maintains daily work records of work done, material used and time spent. Maintains an adequate supply of materials, equipment and tools required to fulfill work assignments. Cleans, maintains and services required equipment and tools used during performance of work assignments. Performs other maintenance work assignments as required in other areas of general maintenance and construction. SECONDARY JOB FUNCTIONS Performs related work as required. Performs special assignments as requested. Exercise regular and predictable attendance and punctuality in accordance with Mohave County Personnel Policies and Procedures. Minimum Qualifications High School diploma /GED (General Education Degree). Minimum three (3) years successful experience in the general maintenance/construction area with possible focus on a specialty area such as facility’s grounds keeping, and/or parks maintenance. Completion of trade school and apprenticeship program in the building maintenance/construction trades. OR an equivalent combination of education, experience, and training which provides the required knowledge, skills and abilities may be considered in meeting the minimum qualifications. SPECIAL JOB REQUIREMENT Must pass drug screen post offer. Must possess a valid Driver's License for operation of motor vehicles on Arizona roads at the start of employment and maintain said license while employed in this position. Must provide driving history upon acceptance of appointment at no cost to the County. Knowledge, Skills & Abilities Knowledge of: Materials, techniques, practices and procedures of general maintenance and construction tasks to include carpentry, electrical, plumbing, cement work, welding, locksmith, grounds keeping, and construction and renovation of buildings and facilities and property. The use and care of a variety of maintenance, construction, grounds keeping equipment mechanical hand and power tools. The occupational hazards and safety requirements of maintenance, construction, grounds keeping and related trades. Local building codes as they related to construction and renovation of facilities. Mohave County Personnel Policies and Procedures, and Department Regulation. Skill in: The maintenance, construction, installation and repair of building structures and related furnishings, and grounds keeping work assignments including layout and estimation and selection of materials. Safe, effective operation and maintenance of hand and power tools and equipment used in maintenance, construction, grounds keeping, and related trades. Ability to: Perform work accurately and in accordance with established standards from blueprints, diagrams, specifications, and oral and written instructions. Safely and effectively service, maintain and repair assigned tools and equipment in accordance with standard repair, maintenance, operation, and safety procedures. Estimate material quantities and labor hours required to perform work assignments. Maintain accurate and up-to-date chronological records and documentation. Direct, train and supervise the activities of assigned personnel. Interpret and apply established guidelines and procedures as provided in trade manuals, building codes and related documentation. Establish and maintain effective working relationships with associate personnel, personnel of other County departments and general public. Perform the essential functions of the job specifications with or without a reasonable accommodation. Fulfill physical requirements of work assignments to include frequent moderate lifting of 25 - 50 pounds, performance of moderate to strenuous manual labor and performing work assignments with the use of tools and equipment in cramped and contorted positions. Comply with Mohave County Personnel Policies and Procedures, and Department Regulation. https://resources.mohave.gov/file/HumanResources/Benefits/Benefits%20Overview.pdf
Sep 19, 2024
Full Time
Job Summary Mohave County Public Works-Facilities Division is currently recruiting for the position of a Facility/Grounds Worker located at Kingman, AZ. ** M-F 7:30am-4pm ** “Hiring salary is $18.22 - $19.91 - DOQ. ” This is the entry level class in the Facility/Grounds Worker series. Positions are normally filled by advancement from the Trades Helper level or, when filled from outside, requires prior general maintenance experience and will be involved in maintaining, repairing and modifying county-owned buildings, facilities, parks, and grounds. REPORTS TO Work is performed under general supervision of a higher level of authority. SUPERVISION EXERCISED None Essential Job Functions Performs a variety of construction and maintenance work including, carpentry, heating, electrical, plumbing, cement finishing, painting, and welding in the maintenance and repair of buildings. Alters and repairs buildings, park equipment, floors, roofs, walls, and related structures. Installs repairs and alters electrical installations, components and equipment. Performs preventive maintenance of same. Set forms, pours, and finishes concrete floors and structures. Paints and refinishes interior and exterior walls, ceilings, and surfaces. Estimates, performs cost comparisons, selects, and requisitions appropriate materials to complete work assignments. Picks up and delivers materials and supplies to job site. Plans and completes work assignments in accordance with blueprints, diagrams, specifications, oral and written instructions in accordance with the standard procedures and safety precautions of the trade. Utilizes a variety of maintenance and grounds keeping equipment and mechanical hand and power tools in performing work assignments. Maintains daily work records of work done, material used and time spent. Maintains an adequate supply of materials, equipment and tools required to fulfill work assignments. Cleans, maintains and services required equipment and tools used during performance of work assignments. Performs other maintenance work assignments as required in other areas of general maintenance and construction. SECONDARY JOB FUNCTIONS Performs related work as required. Performs special assignments as requested. Exercise regular and predictable attendance and punctuality in accordance with Mohave County Personnel Policies and Procedures. Minimum Qualifications High School diploma /GED (General Education Degree). Minimum three (3) years successful experience in the general maintenance/construction area with possible focus on a specialty area such as facility’s grounds keeping, and/or parks maintenance. Completion of trade school and apprenticeship program in the building maintenance/construction trades. OR an equivalent combination of education, experience, and training which provides the required knowledge, skills and abilities may be considered in meeting the minimum qualifications. SPECIAL JOB REQUIREMENT Must pass drug screen post offer. Must possess a valid Driver's License for operation of motor vehicles on Arizona roads at the start of employment and maintain said license while employed in this position. Must provide driving history upon acceptance of appointment at no cost to the County. Knowledge, Skills & Abilities Knowledge of: Materials, techniques, practices and procedures of general maintenance and construction tasks to include carpentry, electrical, plumbing, cement work, welding, locksmith, grounds keeping, and construction and renovation of buildings and facilities and property. The use and care of a variety of maintenance, construction, grounds keeping equipment mechanical hand and power tools. The occupational hazards and safety requirements of maintenance, construction, grounds keeping and related trades. Local building codes as they related to construction and renovation of facilities. Mohave County Personnel Policies and Procedures, and Department Regulation. Skill in: The maintenance, construction, installation and repair of building structures and related furnishings, and grounds keeping work assignments including layout and estimation and selection of materials. Safe, effective operation and maintenance of hand and power tools and equipment used in maintenance, construction, grounds keeping, and related trades. Ability to: Perform work accurately and in accordance with established standards from blueprints, diagrams, specifications, and oral and written instructions. Safely and effectively service, maintain and repair assigned tools and equipment in accordance with standard repair, maintenance, operation, and safety procedures. Estimate material quantities and labor hours required to perform work assignments. Maintain accurate and up-to-date chronological records and documentation. Direct, train and supervise the activities of assigned personnel. Interpret and apply established guidelines and procedures as provided in trade manuals, building codes and related documentation. Establish and maintain effective working relationships with associate personnel, personnel of other County departments and general public. Perform the essential functions of the job specifications with or without a reasonable accommodation. Fulfill physical requirements of work assignments to include frequent moderate lifting of 25 - 50 pounds, performance of moderate to strenuous manual labor and performing work assignments with the use of tools and equipment in cramped and contorted positions. Comply with Mohave County Personnel Policies and Procedures, and Department Regulation. https://resources.mohave.gov/file/HumanResources/Benefits/Benefits%20Overview.pdf