City of Austin, TX
Austin, TX, United States
Minimum Qualifications Heating & Refrigeration Mechanic II Education and Experience: Graduation from an accredited high school or equivalent, plus two years experience in repair and maintenance of residential and commercial heating, ventilation, air conditioning and refrigeration equipment and systems. Completion of accredited training in air conditioning and refrigeration systems may substitute for one year of the required experience. Licenses and Certifications Required: Class “C” driver’s license. If required, must obtain an appropriate commercial driver’s license ( CDL ) within 90 days of employment with the City. If required by the assignment, must be certified within six (6) months of employment in accordance with EPA standards in air conditioning service, repairs and Freon recovery to include Freon recovery equipment operations. If required by the assignment, must be certified within six (6) months of employment as a state vehicle inspector in accordance with TDPS procedures and re Physical Requirements: Must possess Texas Class C driver license in good standing. EPA Refrigerant Recovery Certification Must be a registered HVAC Tech with Texas Department of Licensing and Regulation.. Heating & Refrigeration Mechanic III Education and Experience: Graduation from an accredited high school or equivalent, plus four years’ experience in repair and maintenance of commercial/industrial heating, ventilation, air conditioning or refrigeration systems, including chillers. Completion of accredited training in air conditioning and refrigeration systems may substitute for one year of the required experience. Licenses or Certifications: Texas Driver’s License in good standing EPA Refrigerant Recovery Certification Must obtain unrestricted Texas Air Conditioning License for City use within 120 calendar days of hire. Physical Requirements: Continuous outdoor activity, frequent sitting, standing, walking, squatting, bending, twisting upper body, climbing, exposure to extreme heat, cold, noise, mechanical hazards, fume/odor hazards, occasional kneeling, crawling, carrying up to 50 lbs., lifting up to 50lbs., client/ customer contact, indoor activity, exposure to electrical hazards, explosive hazards, biological hazards, dust/mites hazards. May require employee to be medically cleared to wear respirator. Notes to Applicants Salary: Heating & Refrig Mechanic II $25.40 - $30.10 Heating & Refrig Mechanic III $27.16 - $32.87 Heating & Refrigeration Mechanic II or III : Performs skilled and advanced senior-level work regarding: Installing, maintaining, and servicing Heating, Ventilation, Air Conditioning, and Refrigeration ( HVAC ) systems, including waterlines, valves, drive belts, steam traps, chillers, boilers, pumps, and cooling tower(s). Operates, maintains, troubleshoots, diagnoses, and repairs chiller controls/safety circuits, and refrigerant circuits on multi-stage chillers, air conditioning systems, ice machines, and other equipment. Installs, maintains, troubleshoots, diagnoses, repairs, and performs start-up of building automation system network devices and components. Maintains and repairs energy management control systems network i.e. control boards, relays, sensors, valves, etc. May have lead responsibility for special projects and provide guidance and training in HVAC work to apprentices and other maintenance personnel. NOTES TO APPLICANTS : A detailed and complete job application is REQUIRED and helps us evaluate your qualifications. In completing your job application, please be sure to provide a COMPLETE employment history regarding any relevant experience that you would like for us to consider. This information will also be used to determine base pay in the event that you are selected for this position. NOTE : A cover letter and/or resume will NOT be used to substitute for an incomplete job application. Please understand that your job application, cover letter, and resume will be used to measure or assess your written communication skills, including grammar, punctuation, and spelling, in helping us screen applications and determine candidates to be interviewed. All new employees are required to attend City of Austin and Austin Public Library training as scheduled, and should arrange their outside schedules to accommodate such training. The Austin Public Library reserves the right to close posted positions prior to the advertised close date, based on recruitment strategies and business needs. Working with the City of Austin provides a number of health and welfare benefits such as low-cost medical, dental, vision, paid leave time, a highly competitive retirement plan, training opportunities and more. Please click HERE for more information. Driving Requirement: This position requires a Texas Driver’s License in good standing or the ability to acquire one by your hire date. External New Hires must meet the City of Austin’s Driver Record Evaluation ( DRE ) requisite . To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. EPA Refrigerant Recovery Certification Please attach a copy of the EPA Refrigerant Recovery certification with the application (upload using attrachment Other Document). The Austin Public Library reserves the right to close posted jobs and positions prior to the advertised close date, based on recruitment strategies and business needs . Pay Range (See notes to the applicant) Hours Regular - Full Time (40-hours weekly) Work Schedule: Monday thru Friday (7:00 a.m. till 3:30 p.m.) May be required to respond to emergencies off hours (i.e.: evenings, nights, weekends, and holidays) May occasionally work beyond assigned shift. Work schedule is subject to change based on the needs of the organization. Job Close Date 05/06/2024 Type of Posting External Department Austin Public Library Regular/Temporary Regular Grant Funded or Pooled Position Not Applicable Category Technical Location 635 North Pleasant Valley Road., Austin Texas 78702 Preferred Qualifications Preferred Experience: Experience performing preventive maintenance and repair services on commercial/industrial HVAC equipment. (e.g. heating, ventilation, air conditioning, or refrigeration systems, including chillers). Knowledge of trades related to building maintenance and repair (e.g. plumbing, carpentry, and electrical systems) Skilled in using hand and power tools associated with the craft. Ability to read blueprints, diagrams, and professional drawings. Capability to respond and complete work order requests promptly and correctly. Knowledge of locksmith installations and repair. Ability to respond to emergencies after hours. Ability to obtain an unrestricted Texas Air Conditioning License for City use within 120 calendar days of hire. Duties, Functions and Responsibilities Essential duties and functions, pursuant to the Americans with Disabilities Act, may include the following. Other related duties may be assigned. Heating & Refrigeration Mechanic II Heating & Refrigeration Mechanic III Knowledge, Skills and Abilities Must possess required knowledge, skills, abilities, and experience and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed. Heating & Refrigeration Mechanic II Heating & Refrigeration Mechanic III Criminal Background Investigation This position has been approved for a Criminal Background Investigation. EEO/ADA The City of Austin is committed to compliance with the Americans with Disabilities Act. If you require reasonable accommodation during the application process or have a question regarding an essential job function, please call (512) 974-3210 or Texas Relay by dialing 7-1-1. The City of Austin will not discriminate against any applicant or employee based on race, creed, color, national origin, sex, gender identity, age, religion, veteran status, disability, or sexual orientation. In addition, the City will not discriminate in employment decisions on the basis of an individual’s AIDS , AIDS Related Complex, or HIV status; nor will the City discriminate against individuals who are perceived to be at risk of HIV infection, or who associate with individuals who are believed to be at risk. Information For City Employees: If you are an employee within the department, are in good standing and meet both the minimum and preferred qualifications, then you will receive an initial interview. Supplemental Questions Required fields are indicated with an asterisk (*). * This position requires high school graduation or GED, plus two years’ experience in repair and maintenance of residential and commercial heating, ventilation, air conditioning, and refrigeration equipment and systems. Completion of accredited training in air conditioning and refrigeration systems may substitute for one year of the required experience. Do you meet these requirements? Yes No * This position requires a Texas Driver’s License in good standing. Do you have a Texas Driver’s License in good standing or if selected for this position, do you have the ability to acquire a Texas Driver’s License in good standing by your hire date? Yes No * The City of Austin Driver Eligibility Standards require that External New Hires meet the City’s Driver Record Evaluation (DRE) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. Do you meet this requirement? Yes No * Do you have an EPA Refrigerant Recovery Certification? Yes No * Are you a registered HVAC Tech with Texas Department of Licensing and Regulation? Yes No * This position requires that you must obtain an unrestricted Texas Air Conditioning License for City use within 120 calendar days of hire. Can you meet this requirement? Yes No * This position requires continuous outdoor activity, frequent sitting, standing, walking, squatting, bending, twisting upper body, climbing, exposure to extreme heat, cold, noise, mechanical hazards, fume and odor hazards, occasional kneeling, crawling, carrying up to 50 lbs., lifting up to 50 lbs., client and customer contact, indoor activity, exposure to electrical hazards, explosive hazards, biological hazards, and dust/mites hazards. With or without reasonable accommodations, are you to perform the duties of this position? Yes No * This position requires a criminal background check (CBI). By selecting the following, you are acknowledging that you understand if you are selected as a top candidate for this position, you will need a successful CBI to be hired. I acknowledge and understand this position requires a Criminal Background Check How many years of experience do you have in generating, tracking and reporting work orders in a municipality/government, asset management system and/or a similar work order system. None Less than One (1) year One (1) to Three (3) years Three (3) to Five (5) years More than Five (5) years * Describe your experience in commercial building heating and air condition systems, including troubleshooting experience in HVAC and automated systems. (Open Ended Question) * Describe your knowledge of HVAC controls and the systems you have worked with. (Open Ended Question) * Select your experience in the repair and maintenance of residential and commercial heating, ventilation, air conditioning and refrigeration equipment. No Experience Limited Experience Considerable Experience Extensive Experience * Do you have experience in the troubleshooting, diagnose and repair of Building Automation Systems and if so, how many years? No Experience 0 -1 Year 1-3 Years More than 3 Years * Do you have experience in the troubleshooting, diagnose and repair of Energy Management Systems (EMS) or Building Automation Systems (BAS)? If so, how many years? No Experience 0-1 Year 1 - 3 Year 3 - 5 Year More than 5 Years * Describe your experience reading technical drawings such as blueprints, as-builts, plan sheets, or construction documents and using computerized mapping software. (Open Ended Question) * Are you willing to work after hours for emergency call-back situations? Yes No * My job application is detailed and complete, and I understand that if I am selected as the top candidate for this particular job, my salary will be determined based on the experience submitted on my job application. Yes No Optional & Required Documents Required Documents Other Document Optional Documents
Minimum Qualifications Heating & Refrigeration Mechanic II Education and Experience: Graduation from an accredited high school or equivalent, plus two years experience in repair and maintenance of residential and commercial heating, ventilation, air conditioning and refrigeration equipment and systems. Completion of accredited training in air conditioning and refrigeration systems may substitute for one year of the required experience. Licenses and Certifications Required: Class “C” driver’s license. If required, must obtain an appropriate commercial driver’s license ( CDL ) within 90 days of employment with the City. If required by the assignment, must be certified within six (6) months of employment in accordance with EPA standards in air conditioning service, repairs and Freon recovery to include Freon recovery equipment operations. If required by the assignment, must be certified within six (6) months of employment as a state vehicle inspector in accordance with TDPS procedures and re Physical Requirements: Must possess Texas Class C driver license in good standing. EPA Refrigerant Recovery Certification Must be a registered HVAC Tech with Texas Department of Licensing and Regulation.. Heating & Refrigeration Mechanic III Education and Experience: Graduation from an accredited high school or equivalent, plus four years’ experience in repair and maintenance of commercial/industrial heating, ventilation, air conditioning or refrigeration systems, including chillers. Completion of accredited training in air conditioning and refrigeration systems may substitute for one year of the required experience. Licenses or Certifications: Texas Driver’s License in good standing EPA Refrigerant Recovery Certification Must obtain unrestricted Texas Air Conditioning License for City use within 120 calendar days of hire. Physical Requirements: Continuous outdoor activity, frequent sitting, standing, walking, squatting, bending, twisting upper body, climbing, exposure to extreme heat, cold, noise, mechanical hazards, fume/odor hazards, occasional kneeling, crawling, carrying up to 50 lbs., lifting up to 50lbs., client/ customer contact, indoor activity, exposure to electrical hazards, explosive hazards, biological hazards, dust/mites hazards. May require employee to be medically cleared to wear respirator. Notes to Applicants Salary: Heating & Refrig Mechanic II $25.40 - $30.10 Heating & Refrig Mechanic III $27.16 - $32.87 Heating & Refrigeration Mechanic II or III : Performs skilled and advanced senior-level work regarding: Installing, maintaining, and servicing Heating, Ventilation, Air Conditioning, and Refrigeration ( HVAC ) systems, including waterlines, valves, drive belts, steam traps, chillers, boilers, pumps, and cooling tower(s). Operates, maintains, troubleshoots, diagnoses, and repairs chiller controls/safety circuits, and refrigerant circuits on multi-stage chillers, air conditioning systems, ice machines, and other equipment. Installs, maintains, troubleshoots, diagnoses, repairs, and performs start-up of building automation system network devices and components. Maintains and repairs energy management control systems network i.e. control boards, relays, sensors, valves, etc. May have lead responsibility for special projects and provide guidance and training in HVAC work to apprentices and other maintenance personnel. NOTES TO APPLICANTS : A detailed and complete job application is REQUIRED and helps us evaluate your qualifications. In completing your job application, please be sure to provide a COMPLETE employment history regarding any relevant experience that you would like for us to consider. This information will also be used to determine base pay in the event that you are selected for this position. NOTE : A cover letter and/or resume will NOT be used to substitute for an incomplete job application. Please understand that your job application, cover letter, and resume will be used to measure or assess your written communication skills, including grammar, punctuation, and spelling, in helping us screen applications and determine candidates to be interviewed. All new employees are required to attend City of Austin and Austin Public Library training as scheduled, and should arrange their outside schedules to accommodate such training. The Austin Public Library reserves the right to close posted positions prior to the advertised close date, based on recruitment strategies and business needs. Working with the City of Austin provides a number of health and welfare benefits such as low-cost medical, dental, vision, paid leave time, a highly competitive retirement plan, training opportunities and more. Please click HERE for more information. Driving Requirement: This position requires a Texas Driver’s License in good standing or the ability to acquire one by your hire date. External New Hires must meet the City of Austin’s Driver Record Evaluation ( DRE ) requisite . To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. EPA Refrigerant Recovery Certification Please attach a copy of the EPA Refrigerant Recovery certification with the application (upload using attrachment Other Document). The Austin Public Library reserves the right to close posted jobs and positions prior to the advertised close date, based on recruitment strategies and business needs . Pay Range (See notes to the applicant) Hours Regular - Full Time (40-hours weekly) Work Schedule: Monday thru Friday (7:00 a.m. till 3:30 p.m.) May be required to respond to emergencies off hours (i.e.: evenings, nights, weekends, and holidays) May occasionally work beyond assigned shift. Work schedule is subject to change based on the needs of the organization. Job Close Date 05/06/2024 Type of Posting External Department Austin Public Library Regular/Temporary Regular Grant Funded or Pooled Position Not Applicable Category Technical Location 635 North Pleasant Valley Road., Austin Texas 78702 Preferred Qualifications Preferred Experience: Experience performing preventive maintenance and repair services on commercial/industrial HVAC equipment. (e.g. heating, ventilation, air conditioning, or refrigeration systems, including chillers). Knowledge of trades related to building maintenance and repair (e.g. plumbing, carpentry, and electrical systems) Skilled in using hand and power tools associated with the craft. Ability to read blueprints, diagrams, and professional drawings. Capability to respond and complete work order requests promptly and correctly. Knowledge of locksmith installations and repair. Ability to respond to emergencies after hours. Ability to obtain an unrestricted Texas Air Conditioning License for City use within 120 calendar days of hire. Duties, Functions and Responsibilities Essential duties and functions, pursuant to the Americans with Disabilities Act, may include the following. Other related duties may be assigned. Heating & Refrigeration Mechanic II Heating & Refrigeration Mechanic III Knowledge, Skills and Abilities Must possess required knowledge, skills, abilities, and experience and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed. Heating & Refrigeration Mechanic II Heating & Refrigeration Mechanic III Criminal Background Investigation This position has been approved for a Criminal Background Investigation. EEO/ADA The City of Austin is committed to compliance with the Americans with Disabilities Act. If you require reasonable accommodation during the application process or have a question regarding an essential job function, please call (512) 974-3210 or Texas Relay by dialing 7-1-1. The City of Austin will not discriminate against any applicant or employee based on race, creed, color, national origin, sex, gender identity, age, religion, veteran status, disability, or sexual orientation. In addition, the City will not discriminate in employment decisions on the basis of an individual’s AIDS , AIDS Related Complex, or HIV status; nor will the City discriminate against individuals who are perceived to be at risk of HIV infection, or who associate with individuals who are believed to be at risk. Information For City Employees: If you are an employee within the department, are in good standing and meet both the minimum and preferred qualifications, then you will receive an initial interview. Supplemental Questions Required fields are indicated with an asterisk (*). * This position requires high school graduation or GED, plus two years’ experience in repair and maintenance of residential and commercial heating, ventilation, air conditioning, and refrigeration equipment and systems. Completion of accredited training in air conditioning and refrigeration systems may substitute for one year of the required experience. Do you meet these requirements? Yes No * This position requires a Texas Driver’s License in good standing. Do you have a Texas Driver’s License in good standing or if selected for this position, do you have the ability to acquire a Texas Driver’s License in good standing by your hire date? Yes No * The City of Austin Driver Eligibility Standards require that External New Hires meet the City’s Driver Record Evaluation (DRE) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. Do you meet this requirement? Yes No * Do you have an EPA Refrigerant Recovery Certification? Yes No * Are you a registered HVAC Tech with Texas Department of Licensing and Regulation? Yes No * This position requires that you must obtain an unrestricted Texas Air Conditioning License for City use within 120 calendar days of hire. Can you meet this requirement? Yes No * This position requires continuous outdoor activity, frequent sitting, standing, walking, squatting, bending, twisting upper body, climbing, exposure to extreme heat, cold, noise, mechanical hazards, fume and odor hazards, occasional kneeling, crawling, carrying up to 50 lbs., lifting up to 50 lbs., client and customer contact, indoor activity, exposure to electrical hazards, explosive hazards, biological hazards, and dust/mites hazards. With or without reasonable accommodations, are you to perform the duties of this position? Yes No * This position requires a criminal background check (CBI). By selecting the following, you are acknowledging that you understand if you are selected as a top candidate for this position, you will need a successful CBI to be hired. I acknowledge and understand this position requires a Criminal Background Check How many years of experience do you have in generating, tracking and reporting work orders in a municipality/government, asset management system and/or a similar work order system. None Less than One (1) year One (1) to Three (3) years Three (3) to Five (5) years More than Five (5) years * Describe your experience in commercial building heating and air condition systems, including troubleshooting experience in HVAC and automated systems. (Open Ended Question) * Describe your knowledge of HVAC controls and the systems you have worked with. (Open Ended Question) * Select your experience in the repair and maintenance of residential and commercial heating, ventilation, air conditioning and refrigeration equipment. No Experience Limited Experience Considerable Experience Extensive Experience * Do you have experience in the troubleshooting, diagnose and repair of Building Automation Systems and if so, how many years? No Experience 0 -1 Year 1-3 Years More than 3 Years * Do you have experience in the troubleshooting, diagnose and repair of Energy Management Systems (EMS) or Building Automation Systems (BAS)? If so, how many years? No Experience 0-1 Year 1 - 3 Year 3 - 5 Year More than 5 Years * Describe your experience reading technical drawings such as blueprints, as-builts, plan sheets, or construction documents and using computerized mapping software. (Open Ended Question) * Are you willing to work after hours for emergency call-back situations? Yes No * My job application is detailed and complete, and I understand that if I am selected as the top candidate for this particular job, my salary will be determined based on the experience submitted on my job application. Yes No Optional & Required Documents Required Documents Other Document Optional Documents
MASSACHUSETTS TRIAL COURT
Salem, Massachusetts, United States
Title: Senior Maintenance Technician- Salem Pay Grade: Grade 13 Starting Pay: $54,593.18/Yr. Departmental Mission Statement: The Facilities Management Department of Trial Court provides for the management and maintenance of 63 state-owned courthouses located in ten counties of the Commonwealth. The Department is committed to administering effective property management, and for ensuring the delivery of quality services necessary for the efficient and reliable operation of all of the facilities which it maintains. FACILITES MANAGEMENT & CAPITAL PLANNING ORGANIZATIONAL PROFILE: Notes: Candidate must be licensed as an Electrician, HVAC or a Plumber. The hours for this position is 6am-2pm. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. This position may have occasional travel. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. Position Summary: This series is responsible for performing the full range of skilled trade position duties for both licensed and unlicensed trades. Typical duties include repairing, installing and testing various types of systems and equipment. These positions may also frequently include the application of complex materials and compounds consistent with general contracting work. The title above the entry level requires the performance of increasingly more responsible and varied work which requires advanced skill and experience with regard to the various licensed and unlicensed trades. Employees are appointed at the entry level position title and are eligible for reclassification to a higher level position within this series consistent with the specifications for the higher level position title. The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Reports to a Facilities Supervisor performing structured but not always routine work; Moderate judgment is required. Senior Maintenance Tech I (13) - This is the entry level position within this series. Employees at this level are expected to perform plumbing, electrical, carpentry, HVAC, painting, and other trades and technical work in their area of expertise. Employees are expected to have an established area specialization developed through training and experience and can work independently. Senior Maintenance Tech II (14) - This is the second level within the series. These employees are generally involved in projects of a larger scope and complexity consistent with experience and training. The Senior Maintenance Tech II engages in more complex project assignments and has a higher degree of contact with court officials. Senior Maintenance Tech IIs take lead roles in the completion of projects. Employees are required to work a minimum of three years as a Senior Maintenance Tech I before being eligible to reclassify to the higher level. Senior Maintenance Tech II positions also require the employee to hold a trade or technical license if applicable in their area of specialization prior to applying for reclassification. Senior Maintenance Technician Duties: The following list of major duties represents a composite list of typical duties performed by individuals in various areas of specialization. Specific duties performed by an incumbent will vary depending upon the Division, designated assignment, and level of the employee. All positions may perform related duties as required. Carpenter Maintains buildings and related structures applying carpentry techniques and using carpentry tools to construct, alter, repair and/or install walls, stairs, floors, ceilings, windows, doors, roofs, gutters, locks, air-conditioners, handicapped chair rails and ramps, shelving, etc. Inspect buildings needing carpentry repair or alterations, estimates job duration and the cost and/or quantities of labor and materials needed to complete the job. Interprets and/or draws up sketches, patterns, blueprints, instructions and/or layouts of work to be done. Perform structural repair, alteration or improvement work such as lowering ceilings and paneling rooms; preparing surfaces for plaster or cement work; studding, wiring and plastering walls and cracks in floors or around windows; taping joints on sheetrock; and pre-cementing and/or replacing formica tops. Confers with various department heads or managers regarding handling of emergencies, the feasibility of performing repair or alterations and the scheduling of work. Performs related work such as framing pictures; making window and door screens; drilling holes in signs; ordering materials and supplies and cleaning; and sharpening and tempering various tools and equipment. Electrician Tests, repairs, installs and /or maintains various types of electrical systems and equipment by operating the appropriate equipment and tools to ensure proper maintenance and functioning of necessary equipment. Troubleshoots electrical and related equipment using necessary electrical equipment and by reading schematics, diagrams and outlines to identify and correct operational problems. Maintain an adequate inventory of equipment and materials. Elevator Repairperson The following list of major duties represents a composite list of typical duties performed by individuals in this position. Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division. Inspects and tests elevators and related machinery to ensure that they meet legal operating requirements. Review plans and specifications for proposed installations or alterations of elevators and related machinery. Test elevators to ensure the receipt of certificates of inspections. Provide technical assistance by responding orally or in writing to inquiries. Perform periodic inspections in compliance with public safety requirements. Coordinates and schedules inspections with other agencies and contractors maintaining personal logs, compiles statistical data and represents the agency at hearing or meetings. HVAC Technician Installs, repairs, alters and maintains existing heating, venting and air conditioning (HVAC) equipment and systems. Troubleshoots HVAC equipment and systems. Run standard tests to determine whether finished work meets specifications. Inspect facility to determine the need for maintenance and repair to HVAC equipment. Establish priorities and make recommendations concerning work activities. Locksmith Install lock devices in doors, desks, office equipment and other units. Repairs and/or overhauls locking devices such as mortise, rim, key-in-the knob locks, dead bolt, office equipment, padlocks and emergency exit locks by repairing for replacing worn tumblers, springs or other parts of locking devices; by making alterations to locking mechanisms and units; and/or by replacing escutcheons and face plates on doors to change the size of existing holes to assure correct Fitchburg District Court. Repairs and/or installs locks containing dual locking capabilities by reworking locking devices designed to work in conjunction with other components and equipment to form a complete security or surveillance system. Changes lock combinations by inserting new or repaired tumblers into locks in order to increase security. Mason/Plasterer Lays brick, stone and cement blocks using a variety of hand and power tools such as brick or napping hammer, brick or shill saw, pick, chisel and hammer to build, alter, repair and /or maintain brick and/or concrete surfaces and structures such as sidewalks, partitions, floors, chimneys, etc. Plasters walls and ceilings. Prepare surfaces for plastering or cement work. Pours concrete in molds or forms to make slabs or blocks .Erects and dismantles scaffolding, riggings, and/or ladders. Reads instructions and interprets blueprints and sketches to determine work to be done. Repairs masonry and walls by patching with cement or plaster. Tape joints on sheetrock Perform related duties such as caulking and waterproofing cracks in walls and floors; coring holes through cement or marble floors; cleaning tools and equipment; laying-out cement or marble floors; cleaning tools and equipment; laying-out drop cloths; studding, wiring, and plastering door and window openings, etc. Order materials and supplies. Repair and maintain power tools to ensure proper operation. Painter Applies paints, varnish, and/or stains to all types of surfaces(e.g. wood, metal, plaster, etc.) In order to protect and beautify such surfaces using appropriate utensils and equipment such as paint spraying machines. Prepares surfaces for painting using appropriate tools, equipment and techniques. Selects the types and color of paints, varnish or stain and mixes, blends and prepares the same for proper color match. Erects, repairs, maintains and operates staging, and scaffolding following accepted safety practices in order to gain access to areas needing painting. Estimates length of time, cost and quantities of materials and manpower needed to complete a job. Operates, cleans and maintains hand and power tools, air compressors and painting equipment. Confers with supervisors and department heads regarding the scheduling of work, the handling of emergencies and the feasibility of installing painting equipment and materials in the area in order to ensure that needs of the agency are met expeditiously and at a convenient time. Prepares surfaces for plaster or cement work by taping joints on sheetrock, caulking and waterproofing walls and cracks in floors, etc. by using appropriate tools and equipment. Performs related duties such as preparing various reports; maintaining records and files; setting up signs and barricades; reading instructions on lay-outs; removing and replacing glass; drilling holes in signs; printing letters and signs; laying out drop cloths; and moving office furniture. Based on assignment, may operate road-line painting machines and sand blasting equipment. Read and/or interpret blueprints, sketches, instructions or layouts to understand work to be done. Plumber Install, repairs, and alters steam plumbing systems. Reads and interprets blueprints, sketches, instructions or layouts to understand construction work to be done. Schedules installation, maintenance, and/or repair work by conferring with supervisors and other department personnel to determine location of equipment and appropriate time to complete the project. Estimates length of time, cost of materials and manpower needed to develop a project budget. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas: Ethics and Values Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. Mission Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. Problem Solving Accurately assesses maintenance problems of a routine nature and initiates corrective action. Continuous Learning Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. Commitment to Diversity Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. Customer Service Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. Collaboration Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Senior Maintenance Technician: A high school diploma or equivalent; and, the following required experience and abilities in one or more of the following skilled trades or areas of specialization: Carpenter: Must have at least four years of full-time experience in carpentry, woodworking or cabinet-making work or a combination of two years' experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the principles and techniques of carpentry. Knowledge of the types of building structures. Knowledge of the types of material used in carpentry. Knowledge of the types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging, etc. Knowledge and skill in the types and uses of small hand held tools such as hammers, saws, screwdrivers, chisels, drills, etc. Knowledge and skill in the types and uses of tools used in carpentry bench work. Knowledge and skill in the types and uses of small measurement devices such as power saws, power drills, power hammers, etc. Electrician: Possession of a current and valid Massachusetts journeyman electrician's license issued by the Board of State Examiners of Electricians. Knowledge of state and local electrical codes. Knowledge of inspection techniques used in the electrical trade. Knowledge of safety practices and precautions observed in the electrical trade. Ability to follow oral and written instructions. Ability to perform arithmetical computations with speed and accuracy. Ability to climb and work from ladders and scaffolds. Elevator Repairperson: Possession of a current and valid License as an Maintenance Man and Repairman issued by the Massachusetts Dept. of Public Safety. Knowledge of the principles of operations of elevators, escalators, and hoisting systems. Knowledge of the methods followed in the repair and maintenance of elevators and related machinery. Knowledge of safety practices and procedures followed in connection with maintenance. Skill in the operation of freight and passenger elevators and related machinery. Ability to understand and apply the laws, rules, regulations, policies, procedures, specifications, standards, and guidelines governing elevators and related machinery. Ability to read and interpret such documents as technical and equipment operation manuals, plans, specifications, blueprints, etc. HVAC Technician: Possession of a current and valid Massachusetts journeyman license in a related field or an equivalent combination of education and experience. Experience in interpreting blueprints and plans, estimating costs for renovations, maintenance/repair of HVAC systems. Experience in the use and operation of power tools and other equipment. Knowledge of the laws, rules, and regulations governing HVAC systems. Knowledge of state building codes. Ability to follow written and oral instructions. Ability to perform arithmetical computations with speed and accuracy. Locksmith: Must have at least four years of full-time experience in locksmithing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the methods and techniques used in installing and repair of lock or lock assemblies. Knowledge of the types and uses of small hand tools and uses of precision measuring equipment. Skill in the methods and techniques of making and cutting keys. Ability to exercise discretion in handling confidential information. Ability to maintain accurate records. Ability to follow written and oral instructions. Ability to read and interpret such documents as plans, specifications, blueprints, etc Mason/Plasterer: Must have at least (2) two years of full-time experience as stonemason, marble setter, bricklayer or plaster, or any combination of the required experience. A diploma or certificate from a recognized trade or vocational school, may be substituted for a maximum of one year of experience. Knowledge of standard practices, methods and techniques of masonry. Knowledge of the types and uses of materials used in masonry such as brick, stone, sand, etc. Knowledge of the types and uses of equipment used in masonry such as portable mixers, etc. Knowledge and skill in the types and uses of small hand tools used in masonry such as spades, chisels, trowels, etc. Knowledge of types of masonry bonds. Knowledge of types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging. Skills in the use of masonry equipment such as portable mixers. Ability to follow written instructions. Ability to read and interpret documents such as plans, blueprints, drawings, etc. Ability to climb and work from ladders and scaffolds. Painter: Must have at least three years of full-time experience in painting work or a combination of two year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the practices and techniques of painting. Knowledge of the types and uses of painting materials such as paint, varnishes, and stains. Knowledge of the types of finishes used in painting. Knowledge of the methods of preparation of wood, metal, glass, plaster, cement, and other materials and surfaces for painting. Knowledge of chemical solvents used to prepare surfaces for painting and cleanup. Ability to climb and work from ladders and scaffolds. Knowledge and skill in the types and uses of painting tools such as brushes, rollers, spray machine guns, etc. Knowledge and skill in the types and uses of small hand held tools and power tools such as chisels, drills, power saws, etc. Knowledge of the properties and characteristics of wood. Knowledge of the practices and techniques of mixing and matching paints. Knowledge of the types and uses of safety or climbing equipment used in painting such as scaffolds and ladders. Skill in applying paints and other finishes by brush, cloth, air gun, etc. Skill in using painting equipment such as hand and power-operated paint chippers, sand blasting equipment, etc. Plumber: Possession of a current and valid Massachusetts journeyman plumber's license issued by the Board of State Examiners of Plumbers and Gas Fitters. Knowledge of laws, rules, and regulations governing plumbing. Ability to follow oral and written instructions. Ability to lift and carry heavy objects. Physical stamina and endurance. Ability to maintain accurate records. Roofer: Must have at least two years of full-time experience in roofing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the types and uses of small measurement devices, hand held power tools, and equipment used in roofing. Knowledge of safety practices and procedures followed in roofing. Knowledge of the types and uses of materials used in roofing. Knowledge of the safety practices, methods and techniques of roofing. Skill in the use of small measurement devices, hand held power tools, and equipment used in roofing. Ability to climb and work from ladders and scaffold Closing Date/Time: 2024-08-01
Title: Senior Maintenance Technician- Salem Pay Grade: Grade 13 Starting Pay: $54,593.18/Yr. Departmental Mission Statement: The Facilities Management Department of Trial Court provides for the management and maintenance of 63 state-owned courthouses located in ten counties of the Commonwealth. The Department is committed to administering effective property management, and for ensuring the delivery of quality services necessary for the efficient and reliable operation of all of the facilities which it maintains. FACILITES MANAGEMENT & CAPITAL PLANNING ORGANIZATIONAL PROFILE: Notes: Candidate must be licensed as an Electrician, HVAC or a Plumber. The hours for this position is 6am-2pm. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. This position may have occasional travel. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. Position Summary: This series is responsible for performing the full range of skilled trade position duties for both licensed and unlicensed trades. Typical duties include repairing, installing and testing various types of systems and equipment. These positions may also frequently include the application of complex materials and compounds consistent with general contracting work. The title above the entry level requires the performance of increasingly more responsible and varied work which requires advanced skill and experience with regard to the various licensed and unlicensed trades. Employees are appointed at the entry level position title and are eligible for reclassification to a higher level position within this series consistent with the specifications for the higher level position title. The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Reports to a Facilities Supervisor performing structured but not always routine work; Moderate judgment is required. Senior Maintenance Tech I (13) - This is the entry level position within this series. Employees at this level are expected to perform plumbing, electrical, carpentry, HVAC, painting, and other trades and technical work in their area of expertise. Employees are expected to have an established area specialization developed through training and experience and can work independently. Senior Maintenance Tech II (14) - This is the second level within the series. These employees are generally involved in projects of a larger scope and complexity consistent with experience and training. The Senior Maintenance Tech II engages in more complex project assignments and has a higher degree of contact with court officials. Senior Maintenance Tech IIs take lead roles in the completion of projects. Employees are required to work a minimum of three years as a Senior Maintenance Tech I before being eligible to reclassify to the higher level. Senior Maintenance Tech II positions also require the employee to hold a trade or technical license if applicable in their area of specialization prior to applying for reclassification. Senior Maintenance Technician Duties: The following list of major duties represents a composite list of typical duties performed by individuals in various areas of specialization. Specific duties performed by an incumbent will vary depending upon the Division, designated assignment, and level of the employee. All positions may perform related duties as required. Carpenter Maintains buildings and related structures applying carpentry techniques and using carpentry tools to construct, alter, repair and/or install walls, stairs, floors, ceilings, windows, doors, roofs, gutters, locks, air-conditioners, handicapped chair rails and ramps, shelving, etc. Inspect buildings needing carpentry repair or alterations, estimates job duration and the cost and/or quantities of labor and materials needed to complete the job. Interprets and/or draws up sketches, patterns, blueprints, instructions and/or layouts of work to be done. Perform structural repair, alteration or improvement work such as lowering ceilings and paneling rooms; preparing surfaces for plaster or cement work; studding, wiring and plastering walls and cracks in floors or around windows; taping joints on sheetrock; and pre-cementing and/or replacing formica tops. Confers with various department heads or managers regarding handling of emergencies, the feasibility of performing repair or alterations and the scheduling of work. Performs related work such as framing pictures; making window and door screens; drilling holes in signs; ordering materials and supplies and cleaning; and sharpening and tempering various tools and equipment. Electrician Tests, repairs, installs and /or maintains various types of electrical systems and equipment by operating the appropriate equipment and tools to ensure proper maintenance and functioning of necessary equipment. Troubleshoots electrical and related equipment using necessary electrical equipment and by reading schematics, diagrams and outlines to identify and correct operational problems. Maintain an adequate inventory of equipment and materials. Elevator Repairperson The following list of major duties represents a composite list of typical duties performed by individuals in this position. Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division. Inspects and tests elevators and related machinery to ensure that they meet legal operating requirements. Review plans and specifications for proposed installations or alterations of elevators and related machinery. Test elevators to ensure the receipt of certificates of inspections. Provide technical assistance by responding orally or in writing to inquiries. Perform periodic inspections in compliance with public safety requirements. Coordinates and schedules inspections with other agencies and contractors maintaining personal logs, compiles statistical data and represents the agency at hearing or meetings. HVAC Technician Installs, repairs, alters and maintains existing heating, venting and air conditioning (HVAC) equipment and systems. Troubleshoots HVAC equipment and systems. Run standard tests to determine whether finished work meets specifications. Inspect facility to determine the need for maintenance and repair to HVAC equipment. Establish priorities and make recommendations concerning work activities. Locksmith Install lock devices in doors, desks, office equipment and other units. Repairs and/or overhauls locking devices such as mortise, rim, key-in-the knob locks, dead bolt, office equipment, padlocks and emergency exit locks by repairing for replacing worn tumblers, springs or other parts of locking devices; by making alterations to locking mechanisms and units; and/or by replacing escutcheons and face plates on doors to change the size of existing holes to assure correct Fitchburg District Court. Repairs and/or installs locks containing dual locking capabilities by reworking locking devices designed to work in conjunction with other components and equipment to form a complete security or surveillance system. Changes lock combinations by inserting new or repaired tumblers into locks in order to increase security. Mason/Plasterer Lays brick, stone and cement blocks using a variety of hand and power tools such as brick or napping hammer, brick or shill saw, pick, chisel and hammer to build, alter, repair and /or maintain brick and/or concrete surfaces and structures such as sidewalks, partitions, floors, chimneys, etc. Plasters walls and ceilings. Prepare surfaces for plastering or cement work. Pours concrete in molds or forms to make slabs or blocks .Erects and dismantles scaffolding, riggings, and/or ladders. Reads instructions and interprets blueprints and sketches to determine work to be done. Repairs masonry and walls by patching with cement or plaster. Tape joints on sheetrock Perform related duties such as caulking and waterproofing cracks in walls and floors; coring holes through cement or marble floors; cleaning tools and equipment; laying-out cement or marble floors; cleaning tools and equipment; laying-out drop cloths; studding, wiring, and plastering door and window openings, etc. Order materials and supplies. Repair and maintain power tools to ensure proper operation. Painter Applies paints, varnish, and/or stains to all types of surfaces(e.g. wood, metal, plaster, etc.) In order to protect and beautify such surfaces using appropriate utensils and equipment such as paint spraying machines. Prepares surfaces for painting using appropriate tools, equipment and techniques. Selects the types and color of paints, varnish or stain and mixes, blends and prepares the same for proper color match. Erects, repairs, maintains and operates staging, and scaffolding following accepted safety practices in order to gain access to areas needing painting. Estimates length of time, cost and quantities of materials and manpower needed to complete a job. Operates, cleans and maintains hand and power tools, air compressors and painting equipment. Confers with supervisors and department heads regarding the scheduling of work, the handling of emergencies and the feasibility of installing painting equipment and materials in the area in order to ensure that needs of the agency are met expeditiously and at a convenient time. Prepares surfaces for plaster or cement work by taping joints on sheetrock, caulking and waterproofing walls and cracks in floors, etc. by using appropriate tools and equipment. Performs related duties such as preparing various reports; maintaining records and files; setting up signs and barricades; reading instructions on lay-outs; removing and replacing glass; drilling holes in signs; printing letters and signs; laying out drop cloths; and moving office furniture. Based on assignment, may operate road-line painting machines and sand blasting equipment. Read and/or interpret blueprints, sketches, instructions or layouts to understand work to be done. Plumber Install, repairs, and alters steam plumbing systems. Reads and interprets blueprints, sketches, instructions or layouts to understand construction work to be done. Schedules installation, maintenance, and/or repair work by conferring with supervisors and other department personnel to determine location of equipment and appropriate time to complete the project. Estimates length of time, cost of materials and manpower needed to develop a project budget. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas: Ethics and Values Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. Mission Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. Problem Solving Accurately assesses maintenance problems of a routine nature and initiates corrective action. Continuous Learning Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. Commitment to Diversity Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. Customer Service Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. Collaboration Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Senior Maintenance Technician: A high school diploma or equivalent; and, the following required experience and abilities in one or more of the following skilled trades or areas of specialization: Carpenter: Must have at least four years of full-time experience in carpentry, woodworking or cabinet-making work or a combination of two years' experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the principles and techniques of carpentry. Knowledge of the types of building structures. Knowledge of the types of material used in carpentry. Knowledge of the types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging, etc. Knowledge and skill in the types and uses of small hand held tools such as hammers, saws, screwdrivers, chisels, drills, etc. Knowledge and skill in the types and uses of tools used in carpentry bench work. Knowledge and skill in the types and uses of small measurement devices such as power saws, power drills, power hammers, etc. Electrician: Possession of a current and valid Massachusetts journeyman electrician's license issued by the Board of State Examiners of Electricians. Knowledge of state and local electrical codes. Knowledge of inspection techniques used in the electrical trade. Knowledge of safety practices and precautions observed in the electrical trade. Ability to follow oral and written instructions. Ability to perform arithmetical computations with speed and accuracy. Ability to climb and work from ladders and scaffolds. Elevator Repairperson: Possession of a current and valid License as an Maintenance Man and Repairman issued by the Massachusetts Dept. of Public Safety. Knowledge of the principles of operations of elevators, escalators, and hoisting systems. Knowledge of the methods followed in the repair and maintenance of elevators and related machinery. Knowledge of safety practices and procedures followed in connection with maintenance. Skill in the operation of freight and passenger elevators and related machinery. Ability to understand and apply the laws, rules, regulations, policies, procedures, specifications, standards, and guidelines governing elevators and related machinery. Ability to read and interpret such documents as technical and equipment operation manuals, plans, specifications, blueprints, etc. HVAC Technician: Possession of a current and valid Massachusetts journeyman license in a related field or an equivalent combination of education and experience. Experience in interpreting blueprints and plans, estimating costs for renovations, maintenance/repair of HVAC systems. Experience in the use and operation of power tools and other equipment. Knowledge of the laws, rules, and regulations governing HVAC systems. Knowledge of state building codes. Ability to follow written and oral instructions. Ability to perform arithmetical computations with speed and accuracy. Locksmith: Must have at least four years of full-time experience in locksmithing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the methods and techniques used in installing and repair of lock or lock assemblies. Knowledge of the types and uses of small hand tools and uses of precision measuring equipment. Skill in the methods and techniques of making and cutting keys. Ability to exercise discretion in handling confidential information. Ability to maintain accurate records. Ability to follow written and oral instructions. Ability to read and interpret such documents as plans, specifications, blueprints, etc Mason/Plasterer: Must have at least (2) two years of full-time experience as stonemason, marble setter, bricklayer or plaster, or any combination of the required experience. A diploma or certificate from a recognized trade or vocational school, may be substituted for a maximum of one year of experience. Knowledge of standard practices, methods and techniques of masonry. Knowledge of the types and uses of materials used in masonry such as brick, stone, sand, etc. Knowledge of the types and uses of equipment used in masonry such as portable mixers, etc. Knowledge and skill in the types and uses of small hand tools used in masonry such as spades, chisels, trowels, etc. Knowledge of types of masonry bonds. Knowledge of types and uses of safety and/or climbing equipment such as scaffolds, ladders, rigging. Skills in the use of masonry equipment such as portable mixers. Ability to follow written instructions. Ability to read and interpret documents such as plans, blueprints, drawings, etc. Ability to climb and work from ladders and scaffolds. Painter: Must have at least three years of full-time experience in painting work or a combination of two year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the practices and techniques of painting. Knowledge of the types and uses of painting materials such as paint, varnishes, and stains. Knowledge of the types of finishes used in painting. Knowledge of the methods of preparation of wood, metal, glass, plaster, cement, and other materials and surfaces for painting. Knowledge of chemical solvents used to prepare surfaces for painting and cleanup. Ability to climb and work from ladders and scaffolds. Knowledge and skill in the types and uses of painting tools such as brushes, rollers, spray machine guns, etc. Knowledge and skill in the types and uses of small hand held tools and power tools such as chisels, drills, power saws, etc. Knowledge of the properties and characteristics of wood. Knowledge of the practices and techniques of mixing and matching paints. Knowledge of the types and uses of safety or climbing equipment used in painting such as scaffolds and ladders. Skill in applying paints and other finishes by brush, cloth, air gun, etc. Skill in using painting equipment such as hand and power-operated paint chippers, sand blasting equipment, etc. Plumber: Possession of a current and valid Massachusetts journeyman plumber's license issued by the Board of State Examiners of Plumbers and Gas Fitters. Knowledge of laws, rules, and regulations governing plumbing. Ability to follow oral and written instructions. Ability to lift and carry heavy objects. Physical stamina and endurance. Ability to maintain accurate records. Roofer: Must have at least two years of full-time experience in roofing work or a combination of one year experience and a diploma or certificate from a recognized trade, technical or vocational school at high school level. Knowledge of the types and uses of small measurement devices, hand held power tools, and equipment used in roofing. Knowledge of safety practices and procedures followed in roofing. Knowledge of the types and uses of materials used in roofing. Knowledge of the safety practices, methods and techniques of roofing. Skill in the use of small measurement devices, hand held power tools, and equipment used in roofing. Ability to climb and work from ladders and scaffold Closing Date/Time: 2024-08-01