Announcement Number: 47082 Open to all qualified persons. Posted 04/16/2024 Recruiter: KRISTEN BURKE Phone: (775)888-1491 Email: kburke@dot.nv.gov Applications accepted until recruitment needs are satisfied ** Qualified individuals are encouraged to apply immediately. Lists of eligible candidates will be established and hiring may occur early in the recruiting process. Recruitment will close without notice when a sufficient number of applications are received or a hiring decision has been made. The Position Welders plan and lay out projects and join metal components together using gas welding, arc welding, soldering and brazing processes to fabricate, strengthen and/or repair components, equipment and fixtures. Under general supervision, incumbents perform the full range of duties described in the series concept, and in addition, at the advanced journey level, either: 1) function as a leadworker for lower-level Welders on a regular basis by assigning and reviewing work, and providing input to performance evaluations, training and technical assistance; or 2) in a correctional environment, function as a leadworker for an inmate crew on a regular basis; document inmate performance through completion of periodic performance reports; implement work safety and security procedures to ensure efficient, secure and safe operation of the work unit and the security of assigned inmates, staff, buildings, tools, and equipment in accordance with the Department of Corrections requirements and department policy; secure work areas from unauthorized inmates; or 3) function as a Combination Layout Welder or Specialty Welder performing duties that require a greater degree of ingenuity and original problem solving; perform complex layout and fabrication to integrate structural integrity and conserve materials. This position makes equipment repairs, modifications and adaptations using a variety of equipment and technique as well as original problem-solving skills in performing complex layout of welded equipment components. This knowledge and skill are used to keep a substantial equipment fleet such as trucks, plows and other pieces of equipment used for roadway maintenance, repair, and emergencies response in a safe and efficient operating condition. The State of Nevada is an equal opportunity employer dedicated to building diverse, inclusive, and innovative work environments with employees who reflect our communities and enthusiastically serve them. All applicants are considered without regard to race, color, national origin, religion or belief, age, disability, sex, sexual orientation, gender identity or expression, pregnancy, domestic partnership, genetic information (GINA), or compensation and/or wages. *** THIS RECRUITMENT MAY CLOSE WITHOUT FURTHER NOTICE DEPENDING ON THE NUMBER OF APPLICATIONS RECEIVED. APPLICANTS ARE ENCOURAGED TO APPLY AS SOON AS POSSIBLE*** To see full Class Specifications visit: http://hr.nv.gov/Resources/ClassSpecs/Class_Specifications-9_0/ To Qualify: In order to be qualified, you must meet the following requirements: Education and Experience (Minimum Qualifications) Completion of an approved welding apprenticeship training program followed by one year of journey level welding experience; OR one year of experience as a Welder I in Nevada State service; OR an equivalent combination of education and experience as described above. Special Requirements Pursuant to NRS 284.4066, this position has been identified as affecting public safety. Persons offered employment in this position must submit to a pre-employment screening for controlled substances. Some positions require employees to furnish their own tools. Additional Position Criteria A valid Class A or B commercial driver's license is required within six months of employment. The Examination Application Evaluation Exam The exam will consist of an application evaluation. It is essential that applications include detailed information with time frames regarding education and experience. The most qualified applicants will be contacted by the hiring agency for interview. The hiring agency may require specific skills related testing as part of the interviewing process. INFORMATIONAL LINKS For more information about state employment, visit the following: Division of Human Resource Management: http://hr.nv.gov Public Employees Retirement System: http://www.nvpers.org Public Employees Benefits Program: http://pebp.state.nv.us More Benefits Information: http://nvjobs.nv.gov/Applicants/EB REFER A FRIEND Help us reach qualified candidates! Refer a friend by clicking here: Email Direct Inquiries or Correspondence to: Division of Human Resource Management Northern Nevada 515 East Musser Street, First Floor Carson City, Nevada 89701-4204
Jul 04, 2024
Full Time
Announcement Number: 47082 Open to all qualified persons. Posted 04/16/2024 Recruiter: KRISTEN BURKE Phone: (775)888-1491 Email: kburke@dot.nv.gov Applications accepted until recruitment needs are satisfied ** Qualified individuals are encouraged to apply immediately. Lists of eligible candidates will be established and hiring may occur early in the recruiting process. Recruitment will close without notice when a sufficient number of applications are received or a hiring decision has been made. The Position Welders plan and lay out projects and join metal components together using gas welding, arc welding, soldering and brazing processes to fabricate, strengthen and/or repair components, equipment and fixtures. Under general supervision, incumbents perform the full range of duties described in the series concept, and in addition, at the advanced journey level, either: 1) function as a leadworker for lower-level Welders on a regular basis by assigning and reviewing work, and providing input to performance evaluations, training and technical assistance; or 2) in a correctional environment, function as a leadworker for an inmate crew on a regular basis; document inmate performance through completion of periodic performance reports; implement work safety and security procedures to ensure efficient, secure and safe operation of the work unit and the security of assigned inmates, staff, buildings, tools, and equipment in accordance with the Department of Corrections requirements and department policy; secure work areas from unauthorized inmates; or 3) function as a Combination Layout Welder or Specialty Welder performing duties that require a greater degree of ingenuity and original problem solving; perform complex layout and fabrication to integrate structural integrity and conserve materials. This position makes equipment repairs, modifications and adaptations using a variety of equipment and technique as well as original problem-solving skills in performing complex layout of welded equipment components. This knowledge and skill are used to keep a substantial equipment fleet such as trucks, plows and other pieces of equipment used for roadway maintenance, repair, and emergencies response in a safe and efficient operating condition. The State of Nevada is an equal opportunity employer dedicated to building diverse, inclusive, and innovative work environments with employees who reflect our communities and enthusiastically serve them. All applicants are considered without regard to race, color, national origin, religion or belief, age, disability, sex, sexual orientation, gender identity or expression, pregnancy, domestic partnership, genetic information (GINA), or compensation and/or wages. *** THIS RECRUITMENT MAY CLOSE WITHOUT FURTHER NOTICE DEPENDING ON THE NUMBER OF APPLICATIONS RECEIVED. APPLICANTS ARE ENCOURAGED TO APPLY AS SOON AS POSSIBLE*** To see full Class Specifications visit: http://hr.nv.gov/Resources/ClassSpecs/Class_Specifications-9_0/ To Qualify: In order to be qualified, you must meet the following requirements: Education and Experience (Minimum Qualifications) Completion of an approved welding apprenticeship training program followed by one year of journey level welding experience; OR one year of experience as a Welder I in Nevada State service; OR an equivalent combination of education and experience as described above. Special Requirements Pursuant to NRS 284.4066, this position has been identified as affecting public safety. Persons offered employment in this position must submit to a pre-employment screening for controlled substances. Some positions require employees to furnish their own tools. Additional Position Criteria A valid Class A or B commercial driver's license is required within six months of employment. The Examination Application Evaluation Exam The exam will consist of an application evaluation. It is essential that applications include detailed information with time frames regarding education and experience. The most qualified applicants will be contacted by the hiring agency for interview. The hiring agency may require specific skills related testing as part of the interviewing process. INFORMATIONAL LINKS For more information about state employment, visit the following: Division of Human Resource Management: http://hr.nv.gov Public Employees Retirement System: http://www.nvpers.org Public Employees Benefits Program: http://pebp.state.nv.us More Benefits Information: http://nvjobs.nv.gov/Applicants/EB REFER A FRIEND Help us reach qualified candidates! Refer a friend by clicking here: Email Direct Inquiries or Correspondence to: Division of Human Resource Management Northern Nevada 515 East Musser Street, First Floor Carson City, Nevada 89701-4204
City of Los Angeles
City Of Los Angeles, California, United States
DUTIES ANNUAL SALARY $97,029 (flat-rated) The salary for the Harbor Department is $98,950 (flat-rated) The salary range in the Department of Water and Power is $116,948 to $122,649. The salary range covers multiple pay grades within the class. NOTES : Candidates from the eligible list are normally appointed to vacancies in the lower pay grade positions.The current salary is subject to change. Please confirm the starting salary with the hiring department before accepting a job offer. For information regarding reciprocity between the City of Los Angeles departments and LADWP, go to http://per.lacity.org/Reciprocity_CityDepts_and_DWP.pdf . A Welder performs skilled heating, welding, plasma cutting, and brazing, using arc, flux core, MIG, and TIG welding on a variety of modern metals in a shop, in a generating station, or in the field, using oxyacetylene and electric welding equipment; layout and fabrication work, using manual and power shears, hydraulic punch presses, notchers, benders, drill presses, disc sanders, bench and box breaks, rollers, and a variety of hand tools; reads blueprints, and maintains equipment, performing minor mechanical repairs. NOTE : A Welder may weld at various heights, including working on scaffolding, in excavations, boats, barges, container cranes, on fuel tanks, confined spaces, and in other hazardous locations; and may be required to wear a full or half-face respirator mask under certain working conditions. REQUIREMENT(S)/MINIMUM QUALIFICATION(S) 1. Completion of a recognized apprenticeship as a welder; or 2. Four years of full-time paid experience in the following welding processes: shielded metal arc, tungsten inert gas, gas metal arc, and oxyacetylene cutting. Completion of a welding program at an accredited institution may be substituted for each year of experience lacking up to a maximum of two years at a rate of 15 units in welding to one year of experience specified in Requirement #2. PROCESS NOTES A license as a certified Welder for Structural Steel issued by the Los Angeles City Department of Building and Safety is required for all positions in the General Services Department, for most other positions in the City, and in the Department of Water and Power prior to appointment.Applicants who lack six months or less of the required experience may file for this examination. However, they cannot be appointed until the full experience requirement is met.Applicants filing under Requirement #1 must submit an Apprenticeship Certificate at the time of filing. The copy of the Certificate must be attached to the online application BEFORE the application is submitted. If the Certificate is attached AFTER the online application has been submitted, it will not be available to the City and applicants WILL NOT be credited with having submitted it. Applicants who fail to submit the Apprenticeship Certificate at the time of filing by attaching it to the online application and will not be considered further in this examination.Applicants filing under Requirement #2 must list their specific welding processes experience separately for each employer with the dates of employment on their application. Applicants who fail to provide this information will not be considered further in this examination.Some positions may require a valid California Class C driver’s license; or a valid Class B driver’s license and valid medical certificate approved by the State of California Department of Motor Vehicles, prior to appointment. Candidates may not be eligible for appointment to these positions if their record within the last 36 months reflects three or more moving violations and/or at-fault accidents, or a conviction of a major moving violation (such as DUI).In accordance with Section 608 of the Clean Air Act, an Environmental Protection Agency approved Technician Certificate may be required for some positions prior to appointment.Prior to appointment to some positions, Welders will be required to pass the tests for Operator Qualification in accordance with Section IX of the ASME Boiler and Pressure Vessel Code. Employees in these positions must maintain their welding Operator Performance Qualifications throughout the course of employment.Please note that qualifying education must be from a trade school, college or university accredited by a City of Los Angeles recognized agency. A list of approved accrediting agencies can be found at http://per.lacity.org/Accredited%20institutions%2008-21-08.pdf .Applicants wishing to substitute completion of a welding program for experience must list their school name and location, appropriate course titles, their respective number of semester or quarter units, and completion dates for each course claimed as qualifying in the text box which will appear in the Supplemental Questions section of the online application.Candidates completing the examination process will be contacted by the Personnel Department to provide required proof of qualifying coursework, if applicable. Applicants who wish to expedite this process may attach a copy of their qualifying coursework to their on-line application at the time of filing in the Attachments section. WHERE TO APPLY & APPLICATION DEADLINE Applications will only be accepted on-line on the dates listed in the “Application Deadline” section of this bulletin. When you are viewing the on-line job bulletin of your choice, simply scroll to the top of the page and select the “Apply” icon. On-line job bulletins are also available at https://www.governmentjobs.com/careers/lacity . NOTE : Applicants are urged to apply early to ensure you have time to resolve any technical issues you may encounter. Applications will only be accepted on-line on the following dates listed below: From 8:00 am Friday, January 13, 2023 to 11:59 pm, Thursday, January 26, 2023 From 8:00 am Friday, January 19, 2024 to 11:59 pm, Thursday, February 1, 2024 The examination may close without prior notice at any time after a sufficient number of applications have been received. Filing periods may change without prior notice or additional dates may be added, as needed, at a later date. For administrative purposes, filing will close periodically and reopen on the dates noted in the “Application Deadline” section of this bulletin. In accordance with Civil Service Rule 4.2, all applicants who apply may not be tested in this examination. To meet anticipated hiring needs, only a limited number of qualified applicants will be invited to participate in the selection process in the following order: 1) Los Angeles City Promotional applicants who meet the minimum requirements. You must have received a regular appointment to a City position or be on a reserve list to apply for this examination as a promotional candidate; 2) Applicants currently employed by the City of Los Angeles on a part-time or exempt basis who meet the minimum requirements; 3) Remaining applicants who meet the minimum requirements in sufficient numbers to meet hiring needs based on random sampling of those qualified candidates. Applicants not selected to be tested may re-apply in a subsequent filing period in order to be considered for that period's selection process. SELECTION PROCESS Examination Weight : Multiple-Choice Test . . . . . 100% The examination will consist entirely of a weighted multiple-choice test administered and proctored on-line. In the on-line multiple-choice test the following competencies may be evaluated: Mathematics; Self-Management; Safety Focus; Customer Service; Teamwork; Job Knowledge, including knowledge of: the operation and adjustment of electric welding equipment; processes of welding, cutting, brazing, hard-facing, and skilled heating; types and uses of joints and filler metals for ferrous and nonferrous metals; fabrication and uses of templates and drawings; standard welding symbols approved by the American Welding Society; the air arc gouging process; oxy-acetylene processes; and other necessary skills, knowledge, and abilities. Additional information can be obtained by going to https://per.lacity.org/jobs/job-analyses.cfm and clicking on Competencies under Welder. The multiple-choice test will be proctored and administered on-line during a single session. Candidates invited to participate in the on-line multiple-choice test will be able to take the test from a remote location (i.e., their home) using a computer with a webcam and a reliable internet connection. Candidates will receive an e-mail from the City of Los Angeles outlining the dates and specific steps on how to take the multiple-choice test on-line. Candidates who do not complete and submit the remote proctored multiple-choice test on-line using a computer by the specified date and time will not be considered further in this examination. For candidates who apply during Filing Period 1, it is anticipated that the remote proctored multiple-choice test will be administered between WEDNESDAY, MARCH 29, 2023 and TUESDAY, APRIL 4, 2023 For candidates who apply during Filing Period 2, it is anticipated that the remote proctored multiple-choice test will be administered between TUESDAY, APRIL 2, 2024 and MONDAY, APRIL 8, 2024. FAQs for on-line testing are available at https://per.lacity.org/faqs/employment-testing-process.html . Due to COVID-19 and social distancing requirements, only candidates who demonstrate a hardship may be offered the option to take the multiple-choice test onsite at a City facility. NOTICE : Test dates may be postponed in order to help protect the safety of our candidates and prevent the spread of COVID-19. Candidates will receive an e-mail from the City of Los Angeles Personnel Department if the anticipated test dates are postponed. NOTES : This examination is based on a validation study, and as provided by the Civil Service Commission Rule 4.20, the multiple choice will not be subject to candidate inspection.As a covered entity under the Fair Employment and Housing Act and Title II of the Americans with Disabilities Act, the City of Los Angeles does not discriminate on the basis of disability and upon request, will provide reasonable accommodations to ensure equal access to its programs, services, and activities. To request a disability accommodation, please complete the Disability Accommodation Form within 14 calendar days of the submittal of the City application. The Disability Accommodation Form can be obtained at http://per.lacity.org/exams/verify_disability.pdf . Applications are accepted subject to review to ensure that minimum qualifications are met. Candidates may be disqualified at any time if it is determined that they do not possess the minimum qualifications stated on this bulletin.Based on City Policy, you may be required to undergo mandatory drug and alcohol testing prior to and during employment in this class.Incumbents of some positions in this class may be required to pass an annual or periodic work fitness evaluation to determine their eligibility for continued employment in this class.In conjunction with Civil Service Rules, applicants who have received a regular appointment to a City position or are on a reserve list will be considered Promotional candidates while all other applicants will be considered Open candidates.Seniority credit at the rate of 0.25 of a point for each year of continuous City service will be added to the weighted test score of each promotional candidate.The promotional list will ordinarily be used ahead of the open competitive list. However, if open competitive candidates receive a higher score, without military credits, than the highest available promotional candidate, after adding 0.25 of a point seniority credit for each year of service, the Civil Service Commission, upon request of the appointing authority, may approve certification of such competitive candidates ahead of the promotional candidates.A final average score of 70% or higher is required to be placed on the eligible listYour name may be removed from the open competitive list after 6 months.Your rank on the employment list may change as candidates from other administrations of the examination are merged onto one list.You may take the Welder multiple-choice test only once every 24 months under this bulletin. If you have taken the Welder multiple-choice test during an open filing period in the Personnel Department within the last 24 months under this bulletin, you may not file for this examination at this time.In accordance with Civil Service Rule, Sec. 4.24, review periods may be combined. Candidates in the examination process may file protests as provided in Sec. 4.20, 4.22 and 4.23 as applicable and within the required time frame; however, the Personnel Department may respond to and resolve protests prior to the establishment of the eligible listFor candidates seeking initial City employment, in accordance with Los Angeles City Ordinance 187134, information regarding COVID-19 vaccination requirements as conditions of employment may be found at : https://clkrep.lacity.org/onlinedocs/2021/21-0921_ord_187134_8-24-21.pdf . Notice : If you receive and accept an offer of employment to a regular position with the City of Los Angeles, your employee benefit coverage (including health and dental coverage as well as life insurance) will commence approximately six weeks after your original regular appointment. Not all positions in the City receive benefit coverage; you should inquire regarding the availability of employee benefits prior to accepting a position. . All City employees are required to be Disaster Service Workers. THIS EXAMINATION IS TO BE GIVEN BOTH ON AN INTERDEPARTMENTAL PROMOTIONAL AND AN OPEN COMPETITIVE BASIS The City of Los Angeles does not discriminate on the basis of race, religion, national origin, sex, age, marital status, sexual orientation, gender identity, gender expression, disability, creed, color, ancestry, medical condition (cancer), or Acquired Immune Deficiency Syndrome. AN EQUAL EMPLOYMENT OPPORTUNITY EMPLOYER For additional information and FAQs regarding the City's hiring process, please go to: https://per.lacity.org/faqs/employment-testing-process.html There are many things to consider in a new employer. Visit the following webpage to view benefits the City of Los Angeles offers its employees: http://per.lacity.org/bens/index.html Closing Date/Time:
Jul 14, 2024
Full Time
DUTIES ANNUAL SALARY $97,029 (flat-rated) The salary for the Harbor Department is $98,950 (flat-rated) The salary range in the Department of Water and Power is $116,948 to $122,649. The salary range covers multiple pay grades within the class. NOTES : Candidates from the eligible list are normally appointed to vacancies in the lower pay grade positions.The current salary is subject to change. Please confirm the starting salary with the hiring department before accepting a job offer. For information regarding reciprocity between the City of Los Angeles departments and LADWP, go to http://per.lacity.org/Reciprocity_CityDepts_and_DWP.pdf . A Welder performs skilled heating, welding, plasma cutting, and brazing, using arc, flux core, MIG, and TIG welding on a variety of modern metals in a shop, in a generating station, or in the field, using oxyacetylene and electric welding equipment; layout and fabrication work, using manual and power shears, hydraulic punch presses, notchers, benders, drill presses, disc sanders, bench and box breaks, rollers, and a variety of hand tools; reads blueprints, and maintains equipment, performing minor mechanical repairs. NOTE : A Welder may weld at various heights, including working on scaffolding, in excavations, boats, barges, container cranes, on fuel tanks, confined spaces, and in other hazardous locations; and may be required to wear a full or half-face respirator mask under certain working conditions. REQUIREMENT(S)/MINIMUM QUALIFICATION(S) 1. Completion of a recognized apprenticeship as a welder; or 2. Four years of full-time paid experience in the following welding processes: shielded metal arc, tungsten inert gas, gas metal arc, and oxyacetylene cutting. Completion of a welding program at an accredited institution may be substituted for each year of experience lacking up to a maximum of two years at a rate of 15 units in welding to one year of experience specified in Requirement #2. PROCESS NOTES A license as a certified Welder for Structural Steel issued by the Los Angeles City Department of Building and Safety is required for all positions in the General Services Department, for most other positions in the City, and in the Department of Water and Power prior to appointment.Applicants who lack six months or less of the required experience may file for this examination. However, they cannot be appointed until the full experience requirement is met.Applicants filing under Requirement #1 must submit an Apprenticeship Certificate at the time of filing. The copy of the Certificate must be attached to the online application BEFORE the application is submitted. If the Certificate is attached AFTER the online application has been submitted, it will not be available to the City and applicants WILL NOT be credited with having submitted it. Applicants who fail to submit the Apprenticeship Certificate at the time of filing by attaching it to the online application and will not be considered further in this examination.Applicants filing under Requirement #2 must list their specific welding processes experience separately for each employer with the dates of employment on their application. Applicants who fail to provide this information will not be considered further in this examination.Some positions may require a valid California Class C driver’s license; or a valid Class B driver’s license and valid medical certificate approved by the State of California Department of Motor Vehicles, prior to appointment. Candidates may not be eligible for appointment to these positions if their record within the last 36 months reflects three or more moving violations and/or at-fault accidents, or a conviction of a major moving violation (such as DUI).In accordance with Section 608 of the Clean Air Act, an Environmental Protection Agency approved Technician Certificate may be required for some positions prior to appointment.Prior to appointment to some positions, Welders will be required to pass the tests for Operator Qualification in accordance with Section IX of the ASME Boiler and Pressure Vessel Code. Employees in these positions must maintain their welding Operator Performance Qualifications throughout the course of employment.Please note that qualifying education must be from a trade school, college or university accredited by a City of Los Angeles recognized agency. A list of approved accrediting agencies can be found at http://per.lacity.org/Accredited%20institutions%2008-21-08.pdf .Applicants wishing to substitute completion of a welding program for experience must list their school name and location, appropriate course titles, their respective number of semester or quarter units, and completion dates for each course claimed as qualifying in the text box which will appear in the Supplemental Questions section of the online application.Candidates completing the examination process will be contacted by the Personnel Department to provide required proof of qualifying coursework, if applicable. Applicants who wish to expedite this process may attach a copy of their qualifying coursework to their on-line application at the time of filing in the Attachments section. WHERE TO APPLY & APPLICATION DEADLINE Applications will only be accepted on-line on the dates listed in the “Application Deadline” section of this bulletin. When you are viewing the on-line job bulletin of your choice, simply scroll to the top of the page and select the “Apply” icon. On-line job bulletins are also available at https://www.governmentjobs.com/careers/lacity . NOTE : Applicants are urged to apply early to ensure you have time to resolve any technical issues you may encounter. Applications will only be accepted on-line on the following dates listed below: From 8:00 am Friday, January 13, 2023 to 11:59 pm, Thursday, January 26, 2023 From 8:00 am Friday, January 19, 2024 to 11:59 pm, Thursday, February 1, 2024 The examination may close without prior notice at any time after a sufficient number of applications have been received. Filing periods may change without prior notice or additional dates may be added, as needed, at a later date. For administrative purposes, filing will close periodically and reopen on the dates noted in the “Application Deadline” section of this bulletin. In accordance with Civil Service Rule 4.2, all applicants who apply may not be tested in this examination. To meet anticipated hiring needs, only a limited number of qualified applicants will be invited to participate in the selection process in the following order: 1) Los Angeles City Promotional applicants who meet the minimum requirements. You must have received a regular appointment to a City position or be on a reserve list to apply for this examination as a promotional candidate; 2) Applicants currently employed by the City of Los Angeles on a part-time or exempt basis who meet the minimum requirements; 3) Remaining applicants who meet the minimum requirements in sufficient numbers to meet hiring needs based on random sampling of those qualified candidates. Applicants not selected to be tested may re-apply in a subsequent filing period in order to be considered for that period's selection process. SELECTION PROCESS Examination Weight : Multiple-Choice Test . . . . . 100% The examination will consist entirely of a weighted multiple-choice test administered and proctored on-line. In the on-line multiple-choice test the following competencies may be evaluated: Mathematics; Self-Management; Safety Focus; Customer Service; Teamwork; Job Knowledge, including knowledge of: the operation and adjustment of electric welding equipment; processes of welding, cutting, brazing, hard-facing, and skilled heating; types and uses of joints and filler metals for ferrous and nonferrous metals; fabrication and uses of templates and drawings; standard welding symbols approved by the American Welding Society; the air arc gouging process; oxy-acetylene processes; and other necessary skills, knowledge, and abilities. Additional information can be obtained by going to https://per.lacity.org/jobs/job-analyses.cfm and clicking on Competencies under Welder. The multiple-choice test will be proctored and administered on-line during a single session. Candidates invited to participate in the on-line multiple-choice test will be able to take the test from a remote location (i.e., their home) using a computer with a webcam and a reliable internet connection. Candidates will receive an e-mail from the City of Los Angeles outlining the dates and specific steps on how to take the multiple-choice test on-line. Candidates who do not complete and submit the remote proctored multiple-choice test on-line using a computer by the specified date and time will not be considered further in this examination. For candidates who apply during Filing Period 1, it is anticipated that the remote proctored multiple-choice test will be administered between WEDNESDAY, MARCH 29, 2023 and TUESDAY, APRIL 4, 2023 For candidates who apply during Filing Period 2, it is anticipated that the remote proctored multiple-choice test will be administered between TUESDAY, APRIL 2, 2024 and MONDAY, APRIL 8, 2024. FAQs for on-line testing are available at https://per.lacity.org/faqs/employment-testing-process.html . Due to COVID-19 and social distancing requirements, only candidates who demonstrate a hardship may be offered the option to take the multiple-choice test onsite at a City facility. NOTICE : Test dates may be postponed in order to help protect the safety of our candidates and prevent the spread of COVID-19. Candidates will receive an e-mail from the City of Los Angeles Personnel Department if the anticipated test dates are postponed. NOTES : This examination is based on a validation study, and as provided by the Civil Service Commission Rule 4.20, the multiple choice will not be subject to candidate inspection.As a covered entity under the Fair Employment and Housing Act and Title II of the Americans with Disabilities Act, the City of Los Angeles does not discriminate on the basis of disability and upon request, will provide reasonable accommodations to ensure equal access to its programs, services, and activities. To request a disability accommodation, please complete the Disability Accommodation Form within 14 calendar days of the submittal of the City application. The Disability Accommodation Form can be obtained at http://per.lacity.org/exams/verify_disability.pdf . Applications are accepted subject to review to ensure that minimum qualifications are met. Candidates may be disqualified at any time if it is determined that they do not possess the minimum qualifications stated on this bulletin.Based on City Policy, you may be required to undergo mandatory drug and alcohol testing prior to and during employment in this class.Incumbents of some positions in this class may be required to pass an annual or periodic work fitness evaluation to determine their eligibility for continued employment in this class.In conjunction with Civil Service Rules, applicants who have received a regular appointment to a City position or are on a reserve list will be considered Promotional candidates while all other applicants will be considered Open candidates.Seniority credit at the rate of 0.25 of a point for each year of continuous City service will be added to the weighted test score of each promotional candidate.The promotional list will ordinarily be used ahead of the open competitive list. However, if open competitive candidates receive a higher score, without military credits, than the highest available promotional candidate, after adding 0.25 of a point seniority credit for each year of service, the Civil Service Commission, upon request of the appointing authority, may approve certification of such competitive candidates ahead of the promotional candidates.A final average score of 70% or higher is required to be placed on the eligible listYour name may be removed from the open competitive list after 6 months.Your rank on the employment list may change as candidates from other administrations of the examination are merged onto one list.You may take the Welder multiple-choice test only once every 24 months under this bulletin. If you have taken the Welder multiple-choice test during an open filing period in the Personnel Department within the last 24 months under this bulletin, you may not file for this examination at this time.In accordance with Civil Service Rule, Sec. 4.24, review periods may be combined. Candidates in the examination process may file protests as provided in Sec. 4.20, 4.22 and 4.23 as applicable and within the required time frame; however, the Personnel Department may respond to and resolve protests prior to the establishment of the eligible listFor candidates seeking initial City employment, in accordance with Los Angeles City Ordinance 187134, information regarding COVID-19 vaccination requirements as conditions of employment may be found at : https://clkrep.lacity.org/onlinedocs/2021/21-0921_ord_187134_8-24-21.pdf . Notice : If you receive and accept an offer of employment to a regular position with the City of Los Angeles, your employee benefit coverage (including health and dental coverage as well as life insurance) will commence approximately six weeks after your original regular appointment. Not all positions in the City receive benefit coverage; you should inquire regarding the availability of employee benefits prior to accepting a position. . All City employees are required to be Disaster Service Workers. THIS EXAMINATION IS TO BE GIVEN BOTH ON AN INTERDEPARTMENTAL PROMOTIONAL AND AN OPEN COMPETITIVE BASIS The City of Los Angeles does not discriminate on the basis of race, religion, national origin, sex, age, marital status, sexual orientation, gender identity, gender expression, disability, creed, color, ancestry, medical condition (cancer), or Acquired Immune Deficiency Syndrome. AN EQUAL EMPLOYMENT OPPORTUNITY EMPLOYER For additional information and FAQs regarding the City's hiring process, please go to: https://per.lacity.org/faqs/employment-testing-process.html There are many things to consider in a new employer. Visit the following webpage to view benefits the City of Los Angeles offers its employees: http://per.lacity.org/bens/index.html Closing Date/Time:
TULARE COUNTY
Terra Bella, California, United States
This recruitment will establish an employment list to fill current and any future vacancies within the Resource Management Agency. The anticipated life of the employment list is six months. If interested in employment for this position for current or future vacancies, please submit an online application for consideration. Current vacancy is with the Resource Management Agency located in Terra Bella. The anticipated life of the list is six months. Typical Duties Weld a variety of materials using both gas and arc welding processes. Do cutting, forging and heating of materials to facilitate forming, bending, shaping, tempering or repairing of metal parts. Repair cracks and broken parts of mold, stainless and carbon steel. Grind and shape steel using angle head and bench grinders; fabricate racks, boxes, cylinders and tanks: repair welders and welding cable connections, cast iron manifolds, casting and housings; braze pipe and tubing; replace or repair bearings, thrust washers, seals, belts, chains, gears, hydraulic hoses, pumps, gauges, valves, rams, sprockets and rollers; use oxygen and acetylene torches, saws, shears, arc cutting rods and metal snips to cut, shear or scarify different grades and types of metal; use drill press and handheld drill motors; inspect and determine the type of repair or maintenance work needed on a variety of heavy equipment in shop or field; take down, repair and reassemble engines, transmissions, differentials, gear boxes, steering mechanisms, hydraulics, electrical, cooling, fuel and brake systems; do engine tune-ups and trouble shooting; read and interpret plans and repair manuals; keep time and work records. Minimum Qualifications Education: Equivalent to completion of the twelfth (12th) grade with course work in algebra and geometry. Experience: Level I: Three (3) years in the maintenance and repair of heavy gasoline and diesel-powered construction equipment which included one year performing journey level welding using both gas and arc processes. Level II: Two (2) years of experience as a Heavy Equipment Welder Mechanic I or Five (5) years of experience in the maintenance and repair of heavy gasoline and diesel-powered construction equipment which included one year performing journey level welding using both gas and arc processes. Knowledge of : Gas and arc welding processes, equipment, materials and shop practices; metals for welding, cutting, grinding and drilling; repair, overhaul and maintenance of heavy equipment and accessories, internal combustion gasoline and diesel engines, transmissions and differentials, fuel, hydraulic, electrical, cooling, brake and power-train systems and components; shop equipment such as jacks, hoists and lifting cranes; floor mounted power tools such as drill presses, grinders and hydraulic presses; electrically powered hand tools such as drill motors grinders, impact wrenches; and mechanics' hand tools such as ratchets, sockets and end wrenches; math sufficient to keep timecards and work with measuring tools; metric conversion; safe work practices. Skill/Ability to : Work and communicate effectively with people of various education and socioeconomic backgrounds by respecting beliefs, interpersonal styles and behaviors of both clients and co-workers; operate contemporary office equipment inclusive of computer, keyboard, and all applicable electronic equipment; arc weld various types of materials; braze and silver solder with an acetylene torch; cut, forge, drill, and grind metals; inspect, diagnose, repair, overhaul and maintain heavy equipment engines, systems and components; use manual and powered tools and shop equipment; read, understand and work from blueprints, parts books and service manuals; write accurately to complete service records and timecards; work cooperatively with other shop and yard personnel. License or Certificate: Possession of, or ability to obtain, an appropriate, valid California driver's license. DESIRABLE EMPLOYMENT STANDARDS Knowledge of: Speed setting for drilling and cutting different metals. Additional Information Conditions of Employment Candidates selected will be required to pass a pre-employment drug and alcohol screening. Additionally, a background investigation may also be conducted, which may include a re-investigation every 10 years for some positions. An Employment Eligibility Verification using E-Verify may be required on the first day of employment for some positions. Some job classes may also require a physical exam. College Cost Reduction Access Act This may be a qualifying position for student loan forgiveness through the College Cost Reduction and Access Act (CCRAA). Only student loan payments made after October 1, 2007 and in a qualified repayment plan are eligible. For more information you are encouraged to speak with your student loan servicer or visit: https://studentaid.gov/manage-loans/forgiveness-cancellation/public-service . EQUAL EMPLOYMENT OPPORTUNITY EMPLOYER Bargaining Unit 2 The information listed is a general summary of benefits. These provisions do not constitute an expressed or implied contract and are subject to change. Benefit Amount: An annualbenefit amountis provided and may be applied towards health insurance premiums (medical, dental, vision andlife).This benefit is pro-rated and paid on a pay period basis (24 pay periods). Health Insurance: A choice of PPO and HMOmedical plans which include PPOand HMO dental plans andinclude dentalandvision coverage. Dependent coverage is available. Providers include Anthem Blue Cross, Kaiser Permanente, Delta Dental, andVision Services Plan (VSP) . Retirement: The retirement plan is a defined benefit plan administered pursuant to the 1937 Act County Employees Retirement Act and integrated with Social Security. In addition to ordinary retirement benefits, the plan provides disability and death benefits. Retirement contributions are made by both the County and the employee. The County has reciprocity with the State of California, contracting PERS agencies, and all County 1937 Act Retirement Systems. Paid Holiday Leave: 12 set days and 1 personal holiday . Vacation Accrual: 2 weeks per year (0-3 years of service) 3 weeks per year (3-7 years of service) 4 weeks per year (7-11 years of service) 5 weeks per year (11+ years of service) Limit of 300 hours. Sick Leave Accrual: 12 days per year with unlimited accumulation, 50 hours of which may be used toward family sick leave. Group Term Life Insurance and AD&D: $10,000; Provided by Standard Insurance Company . Disability Insurance: Employees are covered by State Disability Insurance. The premium is paid by the employee. Deferred Compensation: A voluntary deferred compensation plan is available. To view more detailed descriptions of Tulare County's benefits, please view the Benefits section of our Web site at https://tularecounty.ca.gov/hrd/benefits-wellness/health-plans-active-employees/ The Provisions Of This Bulletin Do Not Constitute An Expressed Or Implied Contract And Are Subject To Change. Closing Date/Time: 9/24/2024 11:59 PM Pacific
Sep 15, 2024
Full Time
This recruitment will establish an employment list to fill current and any future vacancies within the Resource Management Agency. The anticipated life of the employment list is six months. If interested in employment for this position for current or future vacancies, please submit an online application for consideration. Current vacancy is with the Resource Management Agency located in Terra Bella. The anticipated life of the list is six months. Typical Duties Weld a variety of materials using both gas and arc welding processes. Do cutting, forging and heating of materials to facilitate forming, bending, shaping, tempering or repairing of metal parts. Repair cracks and broken parts of mold, stainless and carbon steel. Grind and shape steel using angle head and bench grinders; fabricate racks, boxes, cylinders and tanks: repair welders and welding cable connections, cast iron manifolds, casting and housings; braze pipe and tubing; replace or repair bearings, thrust washers, seals, belts, chains, gears, hydraulic hoses, pumps, gauges, valves, rams, sprockets and rollers; use oxygen and acetylene torches, saws, shears, arc cutting rods and metal snips to cut, shear or scarify different grades and types of metal; use drill press and handheld drill motors; inspect and determine the type of repair or maintenance work needed on a variety of heavy equipment in shop or field; take down, repair and reassemble engines, transmissions, differentials, gear boxes, steering mechanisms, hydraulics, electrical, cooling, fuel and brake systems; do engine tune-ups and trouble shooting; read and interpret plans and repair manuals; keep time and work records. Minimum Qualifications Education: Equivalent to completion of the twelfth (12th) grade with course work in algebra and geometry. Experience: Level I: Three (3) years in the maintenance and repair of heavy gasoline and diesel-powered construction equipment which included one year performing journey level welding using both gas and arc processes. Level II: Two (2) years of experience as a Heavy Equipment Welder Mechanic I or Five (5) years of experience in the maintenance and repair of heavy gasoline and diesel-powered construction equipment which included one year performing journey level welding using both gas and arc processes. Knowledge of : Gas and arc welding processes, equipment, materials and shop practices; metals for welding, cutting, grinding and drilling; repair, overhaul and maintenance of heavy equipment and accessories, internal combustion gasoline and diesel engines, transmissions and differentials, fuel, hydraulic, electrical, cooling, brake and power-train systems and components; shop equipment such as jacks, hoists and lifting cranes; floor mounted power tools such as drill presses, grinders and hydraulic presses; electrically powered hand tools such as drill motors grinders, impact wrenches; and mechanics' hand tools such as ratchets, sockets and end wrenches; math sufficient to keep timecards and work with measuring tools; metric conversion; safe work practices. Skill/Ability to : Work and communicate effectively with people of various education and socioeconomic backgrounds by respecting beliefs, interpersonal styles and behaviors of both clients and co-workers; operate contemporary office equipment inclusive of computer, keyboard, and all applicable electronic equipment; arc weld various types of materials; braze and silver solder with an acetylene torch; cut, forge, drill, and grind metals; inspect, diagnose, repair, overhaul and maintain heavy equipment engines, systems and components; use manual and powered tools and shop equipment; read, understand and work from blueprints, parts books and service manuals; write accurately to complete service records and timecards; work cooperatively with other shop and yard personnel. License or Certificate: Possession of, or ability to obtain, an appropriate, valid California driver's license. DESIRABLE EMPLOYMENT STANDARDS Knowledge of: Speed setting for drilling and cutting different metals. Additional Information Conditions of Employment Candidates selected will be required to pass a pre-employment drug and alcohol screening. Additionally, a background investigation may also be conducted, which may include a re-investigation every 10 years for some positions. An Employment Eligibility Verification using E-Verify may be required on the first day of employment for some positions. Some job classes may also require a physical exam. College Cost Reduction Access Act This may be a qualifying position for student loan forgiveness through the College Cost Reduction and Access Act (CCRAA). Only student loan payments made after October 1, 2007 and in a qualified repayment plan are eligible. For more information you are encouraged to speak with your student loan servicer or visit: https://studentaid.gov/manage-loans/forgiveness-cancellation/public-service . EQUAL EMPLOYMENT OPPORTUNITY EMPLOYER Bargaining Unit 2 The information listed is a general summary of benefits. These provisions do not constitute an expressed or implied contract and are subject to change. Benefit Amount: An annualbenefit amountis provided and may be applied towards health insurance premiums (medical, dental, vision andlife).This benefit is pro-rated and paid on a pay period basis (24 pay periods). Health Insurance: A choice of PPO and HMOmedical plans which include PPOand HMO dental plans andinclude dentalandvision coverage. Dependent coverage is available. Providers include Anthem Blue Cross, Kaiser Permanente, Delta Dental, andVision Services Plan (VSP) . Retirement: The retirement plan is a defined benefit plan administered pursuant to the 1937 Act County Employees Retirement Act and integrated with Social Security. In addition to ordinary retirement benefits, the plan provides disability and death benefits. Retirement contributions are made by both the County and the employee. The County has reciprocity with the State of California, contracting PERS agencies, and all County 1937 Act Retirement Systems. Paid Holiday Leave: 12 set days and 1 personal holiday . Vacation Accrual: 2 weeks per year (0-3 years of service) 3 weeks per year (3-7 years of service) 4 weeks per year (7-11 years of service) 5 weeks per year (11+ years of service) Limit of 300 hours. Sick Leave Accrual: 12 days per year with unlimited accumulation, 50 hours of which may be used toward family sick leave. Group Term Life Insurance and AD&D: $10,000; Provided by Standard Insurance Company . Disability Insurance: Employees are covered by State Disability Insurance. The premium is paid by the employee. Deferred Compensation: A voluntary deferred compensation plan is available. To view more detailed descriptions of Tulare County's benefits, please view the Benefits section of our Web site at https://tularecounty.ca.gov/hrd/benefits-wellness/health-plans-active-employees/ The Provisions Of This Bulletin Do Not Constitute An Expressed Or Implied Contract And Are Subject To Change. Closing Date/Time: 9/24/2024 11:59 PM Pacific
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $18.23/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications: High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
Jul 14, 2024
Full Time
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $18.23/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications: High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $42,000/annually General Description and Classification Standards Performs journey-level welding, machining, and fabrication of metals and special alloys for the Department of Parks and Recreation. Duties may include, but are not limited to: maintaining, repairing, designing, and modifying vehicles and construction related equipment as well as fences/gates, cages, burglar bars, plates; and constructs specialized devices, parts and structures. Supervision Received Works under direct supervision and follows standard procedures and written instructions to accomplish assigned tasks. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. May perform other duties as assigned. Uses plans, diagrams, blueprints, and work requests to determine project design, and works with requester to ensure needs are met. Fabricates and modifies parts, equipment, and any item needed in shop or field operations to satisfy work request. Determines metals needed, welding methods, and all particulars of requested jobs; heats and tempers metals; designs, lays-out, and cuts special parts or designs jigs to develop items from ferrous and non-ferrous metals; figures angle, length, diameter, and weight of metals for specific jobs and calculates extremely close tolerances to machine work. Prepares and cleans surfaces and special parts for welding and machining; selects, positions, aligns, and bolts parts or fixtures to be welded or machined. Repairs heavy equipment such as graders, loaders, crawlers, and fabricates repair parts using lathes, milling machines, shavers, and various welders, torches, metal shears, presses, benders and rollers, air tools, saws, and drill presses; uses micrometers and precision measuring tools and all related hand and power tools. Cleans, lubricates, and repairs tools and shop equipment. Completes and maintains records and reports of materials, and time and costs involved in completing projects. Inventories and maintains supplies. May instruct and/or supervise others in the use of welding and machining equipment. Decision Making Selects from multiple procedures and methods to accomplish tasks. Leadership Provided None. May oversee temporary, contract/seasonal or lower grade workers as needed. Knowledge, Skills & Abilities This is a partial listing of necessary knowledge, skills, and abilities required to perform the job successfully. It is not an exhaustive list. Knowledge of: the methods and standard practices of the welding and machinist trades; various metals and alloys. Skilled in: the use of appropriate tools and equipment in a manner consistent with safety principles; in effective communication. Ability to: determine procedures or equipment needed to accomplish task. Minimum Qualifications Education and Experience High school diploma or General Equivalency Diploma (GED). 1 year of experience in the welding, machining, and fabrication of metals and special alloys. Preferred Education & Experience Technical trade certification and 2 years' of experience in the welding, machining, and fabrication of metals and special alloys. CDL License. Licensures and Certifications State of Georgia issued driver’s license required. License must remain valid during tenure in this position. Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job. DPR2024
Jul 14, 2024
Full Time
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $42,000/annually General Description and Classification Standards Performs journey-level welding, machining, and fabrication of metals and special alloys for the Department of Parks and Recreation. Duties may include, but are not limited to: maintaining, repairing, designing, and modifying vehicles and construction related equipment as well as fences/gates, cages, burglar bars, plates; and constructs specialized devices, parts and structures. Supervision Received Works under direct supervision and follows standard procedures and written instructions to accomplish assigned tasks. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. May perform other duties as assigned. Uses plans, diagrams, blueprints, and work requests to determine project design, and works with requester to ensure needs are met. Fabricates and modifies parts, equipment, and any item needed in shop or field operations to satisfy work request. Determines metals needed, welding methods, and all particulars of requested jobs; heats and tempers metals; designs, lays-out, and cuts special parts or designs jigs to develop items from ferrous and non-ferrous metals; figures angle, length, diameter, and weight of metals for specific jobs and calculates extremely close tolerances to machine work. Prepares and cleans surfaces and special parts for welding and machining; selects, positions, aligns, and bolts parts or fixtures to be welded or machined. Repairs heavy equipment such as graders, loaders, crawlers, and fabricates repair parts using lathes, milling machines, shavers, and various welders, torches, metal shears, presses, benders and rollers, air tools, saws, and drill presses; uses micrometers and precision measuring tools and all related hand and power tools. Cleans, lubricates, and repairs tools and shop equipment. Completes and maintains records and reports of materials, and time and costs involved in completing projects. Inventories and maintains supplies. May instruct and/or supervise others in the use of welding and machining equipment. Decision Making Selects from multiple procedures and methods to accomplish tasks. Leadership Provided None. May oversee temporary, contract/seasonal or lower grade workers as needed. Knowledge, Skills & Abilities This is a partial listing of necessary knowledge, skills, and abilities required to perform the job successfully. It is not an exhaustive list. Knowledge of: the methods and standard practices of the welding and machinist trades; various metals and alloys. Skilled in: the use of appropriate tools and equipment in a manner consistent with safety principles; in effective communication. Ability to: determine procedures or equipment needed to accomplish task. Minimum Qualifications Education and Experience High school diploma or General Equivalency Diploma (GED). 1 year of experience in the welding, machining, and fabrication of metals and special alloys. Preferred Education & Experience Technical trade certification and 2 years' of experience in the welding, machining, and fabrication of metals and special alloys. CDL License. Licensures and Certifications State of Georgia issued driver’s license required. License must remain valid during tenure in this position. Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job. DPR2024
Irvine Ranch Water District, CA
Irvine, California, United States
General Description The District: Irvine Ranch Water District (IRWD) is a progressive, values-driven agency, with an international reputation for its leading-edge financial management practices, water recycling program, water use efficiency practices, water banking, urban runoff treatment, and energy generation and storage. Established in 1961 as a California Water District under the provisions of the California Water Code, IRWD is an independent special district serving central Orange County. IRWD provides high-quality drinking water, reliable sewage collection and treatment, ground-breaking recycled water programs, and environmentally sound urban runoff treatment to its customers. As an independent, not-for-profit public agency, IRWD is governed by a publicly elected five-member Board of Directors. The Board is responsible for the District's policies and decision-making. Day-to-day operations are supervised by the General Manager. Additional information can be found at the District's website: www.IRWD.com. IRWD Corporate Values Irvine Ranch Water District believes that its values drive the character, culture, and capacity of our organization. IRWD was built on values, and we weave them into the fabric of everything we do. Values are the ingredients in our recipe for both institutional and individual success. They are a code of conduct to promote positive outcomes for others and ourselves. They are more than words on a wall or a website. We live by them every day. We pledge to keep them relevant in an ever-changing world. IRWD's employees enjoy working in a safe, supportive, and nurturing environment where they form strong bonds with fellow employees. To ensure effective communication and promote a collaborative team environment, employees report to work each day in the office or in the field, depending on their positions. The Position: Under direct supervision, install, replace, repair, modify and maintain potable and recycled water in a large metropolitan water infrastructure. May be required to participate in the District standby program and scheduled or unscheduled overtime. There are currently two (2) vacancies within the Water Maintenance Technician Series within Construction Services. For the full job description and responsibilities of the position, please click here. Summary of Duties Perform appropriate maintenance, installation, repair, modification or fabrication of various District pipelines and systems per District specifications. Routinely required to work in the streets and provide own traffic control, according to District safety standards. Drive, operate, and maintain equipment, tools, and vehicles. Assume role of District representative to communicate with customers affected by scheduled work. Provide equipment and maintenance support to other departments. Comply with District Dechlorination Procedures. Ensure job site is left safe and clean. Work in permit and non-permit required confined space and rescue operations environment. Comply with District safety work-related practices and attend relevant safety training. Read and interpret blueprints, maps, atlases, District Specification Book and SDS. Other related duties as assigned. When Assigned to Construction Services: Shutdown water service at repair site and install appropriate shoring as needed. Restore water service, backfill excavation site and install trench plate according to city and county specifications. Ability to identify and use transition couplings, full circle repair clamps, pipeline adapters, compression fittings and other water related repair materials. Familiarity with C-900 PVC, A.C.P., ductile iron, steel, copper, brass, polybutylene and plastic pipes. Ability to use gas detectors, pipe locator, jackhammer, compactor, chipping gun, cutoff saw, tapping machine, saw cutter, silver solder, gas torch, coring machine, boring machine, cement mixer, welder, compressor, pipe freezer , generator, pumps, rotary hammer, dump truck, forklift and a variety of other hand and power tools, as well as heavy equipment including backhoe, skiploader, dozer, crane, mini excavator, water truck and air shovel. Perform pre-trip safety inspection on vehicles and equipment to be used daily. Ensure parts and materials are available and stocked on the crew truck. Identify utility markings at job site to determine location for excavation. Safely handle and transport hazardous materials including: chlorine, sodium thiosulfate, ammonia, bitumastic, acetylene, asbestos and fuels . Qualifications High school graduation or equivalent and: Water Maintenance Technician III : Three years experience in water related maintenance, construction, installation or repair. Familiarity with hand and power tools. Familiarity with Windows based computerized environment. Water Maintenance Technician II : Two years of experience in water related maintenance, construction, installation or repair. Familiarity with hand and power tools. Familiarity with Windows based computerized environment. Water Maintenance Technician I : One year of experience in water related maintenance, construction, installation or repair. Familiarity with hand and power tools. Licenses and Certifications : Valid Class 'A' California Driver's License. Tanker Endorsement required. Water Maintenance Technician III : State Water Resources Control Board Grade 3 Water Distribution Certification. Water Maintenance Technician II : State Water Resources Control Board Grade 2 Water Distribution Certification. Water Maintenance Technician I : State Water Resources Control Board Grade 1 Water Distribution Certification. Competent Person Certification within 6 months of hire date may be required on some crews. Forklift certification desired. Additional Information The physical and mental demands described below are representative of those that must be met by employees to successfully perform the essential functions of this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability and Interpersonal Communication Ability to effectively communicate both orally and in writing. Ability to communicate effectively with all levels of office/field employees, management and vendors. Represent District in a professional manner when dealing with customers, outside contractors and agency officials. Ability to advise and provide interpretation to others on how to apply policies, procedures and standards to specific situations. Mathematical Ability Ability to add, subtract, multiply and divide. Ability to calculate cubic yards and square footage, and convert water equivalents. Technology Ability Proficient in the use of MS Office Suite (Word, Excel). Keyboarding abilities sufficient to perform the job. Judgment and Situational Reasoning Ability Ability to use good personal judgment and discretion in performing all job functions. Physical Requirements Ability to lift 50 lbs. on a routine basis and up to 90 lbs. with assistance. Must be certified annually to wear respiratory equipment. Must be clean-shaven such that facial hair does not interfere with the fit of a tight-fitting respirator. Ability to exert heavy physical effort in heavy work, typically involving some combination of climbing and balancing, stooping, kneeling, crouching, crawling, lifting, carrying, pushing, twisting and pulling. Ability to operate equipment and machinery with some operations requiring complex and rapid adjustments. Ability to work in a confined space environment and in underground and high locations. Environmental Adaptability Ability to work under sometimes uncomfortable conditions with exposure to environmental factors such as toxic agents, wildlife, disease, equipment, high-speed traffic or machinery. IMPORTANT APPLICATION INFORMATION AND INSTRUCTION All applicants are required to complete and submit a District application form online and answer the supplemental questionnaire. Stating "See Resume" is not an acceptable substitute for a completed application. Resumes or faxed copies will not be accepted in lieu of the District online application. To apply, click on the "Apply" link located at the top of this page. New users must create an account first. Click on this link for instructions on how to set up your account and apply for the first time: Online Employment Application Guide Applications will be reviewed by the Human Resources Department and the subject matter expert. Those applicants possessing the most pertinent qualifications will be invited to continue in the selection process, which will include: Performance Skills Assessment ( tentatively scheduled for October 1, 2024 ) : which will evaluate candidates' proficiency in using and operating backhoe for those candidates qualifying for Water Maintenance Technician III. Oral Interview Examination ( tentatively scheduled for October 1, 2024 ) : will evaluate the candidates' experience, training, education, and abilities in relation to those factors which are essential for successful performance on the job. Communication regarding your application and/or status will be sent to the email address listed on your application. Please check your email regularly throughout the recruitment process as you will not receive communications by any other method. Disaster Service Worker: In accordance with Government Code Section 3100, Irvine Ranch Water District employees, in the event of a disaster, are considered disaster service workers and may be asked to respond accordingly. Equal Opportunity Employer Irvine Ranch Water District is an Equal Opportunity Employer and provides reasonable accommodations to qualified individuals with disabilities. If you consider yourself a person with a disability, you may contact the Human Resources Department for a reasonable accommodation. IRWD offers a comprehensive benefits package for eligible employees and their eligible dependents. These benefits include the following: retirement benefits; medical, dental, vision, and life insurance; anda variety of other benefits. Benefits may vary based on employment status. This benefits overview is intended to be a summary, is not intended to be all-inclusive,and may not be applicable to all employees. Retirement Employees hired on or after January 1, 2013: The District, in compliance with the California Public Employees' Pension Reform Act of 2012 (PEPRA), implemented a third tier for new employees hired on or after January 1, 2013. New employees hired on or after January 1, 2013 who have not been in PERS membership or in membership with a reciprocal retirement system within 6 months of hire date will receive benefits under the California Public Employees Retirement System at a 2 percent at age 62 formula. This formula gradually increases to a maximum benefits of 2.5 percent at age 67. Final compensation calculations will be based on the highest three-year average of regular recurring pay. The District pays the employer's share of these costs. The employee share of the pension cost of 7.50% is paid in full by the employees hired under this formula. Employees hired on or after September 29, 2012 or "Classic" PERS members hired on or after January 1, 2013: On September 24, 2012, the IRWD Board of Directors approved the addition of a second tier to the CalPERS retirement benefits. New employees hired on or after September 29th through December 31, 2012, and employees hired on or after January 1, 2013 who have been in PERS membership or in membership with a reciprocal retirement system, will receive benefits under the California Public Employees Retirement System at 2 percent at age 60 formula. This formula gradually increases to a maximum benefit of 2.418% at age 63. The District pays the employer share of these costs and the employee share of the pension cost of 7% is paid in full by the employees hired under this formula. Final retirement compensation calculations are based on the highest three-year average of regular, recurring pay. IRWDdoes not participate or pay into Social Security except for the Medicare portion. Medical Insurance IRWD contracts with CalPERS for medical insurance coverage. Employees may elect coverage from a variety of PPO and HMO plans. The employee and District contribution for health insurance varies by plan.Coverage is effective the first day of the month following the date of hire. Dental Insurance IRWD contracts with Delta Dental for dental coverage.IRWD pays 100% of the premium for dental coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Vision Insurance IRWD contracts with the EyeMed for vision coverage. IRWD pays 100% of the premium for vision coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Life Insurance Elgible employees are provided with life insurance coverage equal to three or four times their annual salary, depending on their level of compensation. Eligible dependents are also covered for a flat benefit amount. Coverage is effective the first day of the month following the date of hire. Deferred Compensation Participation in adeferred compensation plan is available through Empower Retirement. Enrollment is voluntary and contributions are employee-paid and subject to IRS limits. The District matches employee contributions up to 3% of base pay after 1 year of employment. Paid Vacation Eligible employees begin accruing vacation benefits at the rate of 80 hours per year for the first 5 years of employment. Employees accrue 120 hours per year after 5 years of employment and 160 hours per year after 10 years of employment. Paid Holidays The District offers 11 scheduled paid holidaysplus one personal holiday per year. Sick Leave Eligible employees accrue 96 hours of sick leave annually. Flexible Spending Accounts Eligible employees may elect to participate in the District's Flex Advantage program. This program allows employees to deposit pre-tax dollars into special accounts to be used for a variety of purposes, including paying for qualified miscellaneous health care expenses and dependent care expenses. IRWD contracts with a third party administer to process payments from employee accounts using claim forms or a Flex Spending debit card. Educational Assistance The District will share in the pre-approved educational costs of tuition and books for employees who wish to attend college or take certification classes. Closing Date/Time: 9/20/2024 11:59 PM Pacific
Sep 07, 2024
Full Time
General Description The District: Irvine Ranch Water District (IRWD) is a progressive, values-driven agency, with an international reputation for its leading-edge financial management practices, water recycling program, water use efficiency practices, water banking, urban runoff treatment, and energy generation and storage. Established in 1961 as a California Water District under the provisions of the California Water Code, IRWD is an independent special district serving central Orange County. IRWD provides high-quality drinking water, reliable sewage collection and treatment, ground-breaking recycled water programs, and environmentally sound urban runoff treatment to its customers. As an independent, not-for-profit public agency, IRWD is governed by a publicly elected five-member Board of Directors. The Board is responsible for the District's policies and decision-making. Day-to-day operations are supervised by the General Manager. Additional information can be found at the District's website: www.IRWD.com. IRWD Corporate Values Irvine Ranch Water District believes that its values drive the character, culture, and capacity of our organization. IRWD was built on values, and we weave them into the fabric of everything we do. Values are the ingredients in our recipe for both institutional and individual success. They are a code of conduct to promote positive outcomes for others and ourselves. They are more than words on a wall or a website. We live by them every day. We pledge to keep them relevant in an ever-changing world. IRWD's employees enjoy working in a safe, supportive, and nurturing environment where they form strong bonds with fellow employees. To ensure effective communication and promote a collaborative team environment, employees report to work each day in the office or in the field, depending on their positions. The Position: Under direct supervision, install, replace, repair, modify and maintain potable and recycled water in a large metropolitan water infrastructure. May be required to participate in the District standby program and scheduled or unscheduled overtime. There are currently two (2) vacancies within the Water Maintenance Technician Series within Construction Services. For the full job description and responsibilities of the position, please click here. Summary of Duties Perform appropriate maintenance, installation, repair, modification or fabrication of various District pipelines and systems per District specifications. Routinely required to work in the streets and provide own traffic control, according to District safety standards. Drive, operate, and maintain equipment, tools, and vehicles. Assume role of District representative to communicate with customers affected by scheduled work. Provide equipment and maintenance support to other departments. Comply with District Dechlorination Procedures. Ensure job site is left safe and clean. Work in permit and non-permit required confined space and rescue operations environment. Comply with District safety work-related practices and attend relevant safety training. Read and interpret blueprints, maps, atlases, District Specification Book and SDS. Other related duties as assigned. When Assigned to Construction Services: Shutdown water service at repair site and install appropriate shoring as needed. Restore water service, backfill excavation site and install trench plate according to city and county specifications. Ability to identify and use transition couplings, full circle repair clamps, pipeline adapters, compression fittings and other water related repair materials. Familiarity with C-900 PVC, A.C.P., ductile iron, steel, copper, brass, polybutylene and plastic pipes. Ability to use gas detectors, pipe locator, jackhammer, compactor, chipping gun, cutoff saw, tapping machine, saw cutter, silver solder, gas torch, coring machine, boring machine, cement mixer, welder, compressor, pipe freezer , generator, pumps, rotary hammer, dump truck, forklift and a variety of other hand and power tools, as well as heavy equipment including backhoe, skiploader, dozer, crane, mini excavator, water truck and air shovel. Perform pre-trip safety inspection on vehicles and equipment to be used daily. Ensure parts and materials are available and stocked on the crew truck. Identify utility markings at job site to determine location for excavation. Safely handle and transport hazardous materials including: chlorine, sodium thiosulfate, ammonia, bitumastic, acetylene, asbestos and fuels . Qualifications High school graduation or equivalent and: Water Maintenance Technician III : Three years experience in water related maintenance, construction, installation or repair. Familiarity with hand and power tools. Familiarity with Windows based computerized environment. Water Maintenance Technician II : Two years of experience in water related maintenance, construction, installation or repair. Familiarity with hand and power tools. Familiarity with Windows based computerized environment. Water Maintenance Technician I : One year of experience in water related maintenance, construction, installation or repair. Familiarity with hand and power tools. Licenses and Certifications : Valid Class 'A' California Driver's License. Tanker Endorsement required. Water Maintenance Technician III : State Water Resources Control Board Grade 3 Water Distribution Certification. Water Maintenance Technician II : State Water Resources Control Board Grade 2 Water Distribution Certification. Water Maintenance Technician I : State Water Resources Control Board Grade 1 Water Distribution Certification. Competent Person Certification within 6 months of hire date may be required on some crews. Forklift certification desired. Additional Information The physical and mental demands described below are representative of those that must be met by employees to successfully perform the essential functions of this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability and Interpersonal Communication Ability to effectively communicate both orally and in writing. Ability to communicate effectively with all levels of office/field employees, management and vendors. Represent District in a professional manner when dealing with customers, outside contractors and agency officials. Ability to advise and provide interpretation to others on how to apply policies, procedures and standards to specific situations. Mathematical Ability Ability to add, subtract, multiply and divide. Ability to calculate cubic yards and square footage, and convert water equivalents. Technology Ability Proficient in the use of MS Office Suite (Word, Excel). Keyboarding abilities sufficient to perform the job. Judgment and Situational Reasoning Ability Ability to use good personal judgment and discretion in performing all job functions. Physical Requirements Ability to lift 50 lbs. on a routine basis and up to 90 lbs. with assistance. Must be certified annually to wear respiratory equipment. Must be clean-shaven such that facial hair does not interfere with the fit of a tight-fitting respirator. Ability to exert heavy physical effort in heavy work, typically involving some combination of climbing and balancing, stooping, kneeling, crouching, crawling, lifting, carrying, pushing, twisting and pulling. Ability to operate equipment and machinery with some operations requiring complex and rapid adjustments. Ability to work in a confined space environment and in underground and high locations. Environmental Adaptability Ability to work under sometimes uncomfortable conditions with exposure to environmental factors such as toxic agents, wildlife, disease, equipment, high-speed traffic or machinery. IMPORTANT APPLICATION INFORMATION AND INSTRUCTION All applicants are required to complete and submit a District application form online and answer the supplemental questionnaire. Stating "See Resume" is not an acceptable substitute for a completed application. Resumes or faxed copies will not be accepted in lieu of the District online application. To apply, click on the "Apply" link located at the top of this page. New users must create an account first. Click on this link for instructions on how to set up your account and apply for the first time: Online Employment Application Guide Applications will be reviewed by the Human Resources Department and the subject matter expert. Those applicants possessing the most pertinent qualifications will be invited to continue in the selection process, which will include: Performance Skills Assessment ( tentatively scheduled for October 1, 2024 ) : which will evaluate candidates' proficiency in using and operating backhoe for those candidates qualifying for Water Maintenance Technician III. Oral Interview Examination ( tentatively scheduled for October 1, 2024 ) : will evaluate the candidates' experience, training, education, and abilities in relation to those factors which are essential for successful performance on the job. Communication regarding your application and/or status will be sent to the email address listed on your application. Please check your email regularly throughout the recruitment process as you will not receive communications by any other method. Disaster Service Worker: In accordance with Government Code Section 3100, Irvine Ranch Water District employees, in the event of a disaster, are considered disaster service workers and may be asked to respond accordingly. Equal Opportunity Employer Irvine Ranch Water District is an Equal Opportunity Employer and provides reasonable accommodations to qualified individuals with disabilities. If you consider yourself a person with a disability, you may contact the Human Resources Department for a reasonable accommodation. IRWD offers a comprehensive benefits package for eligible employees and their eligible dependents. These benefits include the following: retirement benefits; medical, dental, vision, and life insurance; anda variety of other benefits. Benefits may vary based on employment status. This benefits overview is intended to be a summary, is not intended to be all-inclusive,and may not be applicable to all employees. Retirement Employees hired on or after January 1, 2013: The District, in compliance with the California Public Employees' Pension Reform Act of 2012 (PEPRA), implemented a third tier for new employees hired on or after January 1, 2013. New employees hired on or after January 1, 2013 who have not been in PERS membership or in membership with a reciprocal retirement system within 6 months of hire date will receive benefits under the California Public Employees Retirement System at a 2 percent at age 62 formula. This formula gradually increases to a maximum benefits of 2.5 percent at age 67. Final compensation calculations will be based on the highest three-year average of regular recurring pay. The District pays the employer's share of these costs. The employee share of the pension cost of 7.50% is paid in full by the employees hired under this formula. Employees hired on or after September 29, 2012 or "Classic" PERS members hired on or after January 1, 2013: On September 24, 2012, the IRWD Board of Directors approved the addition of a second tier to the CalPERS retirement benefits. New employees hired on or after September 29th through December 31, 2012, and employees hired on or after January 1, 2013 who have been in PERS membership or in membership with a reciprocal retirement system, will receive benefits under the California Public Employees Retirement System at 2 percent at age 60 formula. This formula gradually increases to a maximum benefit of 2.418% at age 63. The District pays the employer share of these costs and the employee share of the pension cost of 7% is paid in full by the employees hired under this formula. Final retirement compensation calculations are based on the highest three-year average of regular, recurring pay. IRWDdoes not participate or pay into Social Security except for the Medicare portion. Medical Insurance IRWD contracts with CalPERS for medical insurance coverage. Employees may elect coverage from a variety of PPO and HMO plans. The employee and District contribution for health insurance varies by plan.Coverage is effective the first day of the month following the date of hire. Dental Insurance IRWD contracts with Delta Dental for dental coverage.IRWD pays 100% of the premium for dental coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Vision Insurance IRWD contracts with the EyeMed for vision coverage. IRWD pays 100% of the premium for vision coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Life Insurance Elgible employees are provided with life insurance coverage equal to three or four times their annual salary, depending on their level of compensation. Eligible dependents are also covered for a flat benefit amount. Coverage is effective the first day of the month following the date of hire. Deferred Compensation Participation in adeferred compensation plan is available through Empower Retirement. Enrollment is voluntary and contributions are employee-paid and subject to IRS limits. The District matches employee contributions up to 3% of base pay after 1 year of employment. Paid Vacation Eligible employees begin accruing vacation benefits at the rate of 80 hours per year for the first 5 years of employment. Employees accrue 120 hours per year after 5 years of employment and 160 hours per year after 10 years of employment. Paid Holidays The District offers 11 scheduled paid holidaysplus one personal holiday per year. Sick Leave Eligible employees accrue 96 hours of sick leave annually. Flexible Spending Accounts Eligible employees may elect to participate in the District's Flex Advantage program. This program allows employees to deposit pre-tax dollars into special accounts to be used for a variety of purposes, including paying for qualified miscellaneous health care expenses and dependent care expenses. IRWD contracts with a third party administer to process payments from employee accounts using claim forms or a Flex Spending debit card. Educational Assistance The District will share in the pre-approved educational costs of tuition and books for employees who wish to attend college or take certification classes. Closing Date/Time: 9/20/2024 11:59 PM Pacific
University Medical Center of Southern Nevada
Las Vegas, Nevada, United States
Position Summary EMPLOYER-PAID PENSION PLAN ( NEVADA PERS) COMPETITIVE SALARY & BENEFITS PACKAGE. As an academic medical center with a rich history of providing life-saving treatment in Southern Nevada, UMC serves as the anchor hospital of the Las Vegas Medical District, offering Nevada’s highest level of care to promote successful medical outcomes for patients. We are home to Nevada's ONLY Level I Trauma Center, Designated Pediatric Trauma Center, Burn Care Center, and Transplant Center. We are a Pathway Designated facility by ANCC, and we are on our journey to Magnet status. Position Summary: Performs the duties of one of the skilled trades, such as carpentry, electrical, electronics, plumbing, HVAC, welding, painting, etc., to maintain all clinical and non-clinical facilities equipment and furnishings. Duties may include repair work, Preventative maintenance routines, new maintenance projects, facility maintenance, etc. Job Requirement Education/Experience: Equivalent to graduation from high school and successful completion of a recognized apprenticeship in one of the trades and two (2) years of journey-level experience in the installation, maintenance and repair of building operating systems and facilities. Two (2) additional years of experience will be accepted in lieu of completion of an apprenticeship program. Licensing/Certification Requirements: Positions in this class may require one of the following licenses: carpenter, or; electrician, or; HVAC, or; plumber License, or; welder. Valid Class C Nevada driver's license is required. Additional and/or Preferred Position Requirements APPLICANTS WHO DOCUMENT THE FOLLOWING WILL BE GIVEN PREFERENCE: Local 501 Referrals ONLY Healthcare experience a plus Experience with electrical, (High Voltage, Generator, ATS), low voltage, plumbing/HVAC and electronic repair Possess a valid NEC/ICC electrical card and or a Clark County Journeymen plumbing license Knowledge, Skills, Abilities, and Physical Requirements Knowledge of: Codes, laws and regulations governing area of assignment; basic mathematical computations; systems in area of assignment and how systems interact and relate to one another; certain positions require knowledge of: electronic equipment, video surveillance systems, televisions and VCRs, public address systems and master antenna systems; Schematic diagrams; building schematics including electrical lines, alarms and electrical boxes; building structures, codes and standards such as American Disability Act requirements and fire codes; department and hospital safety practices and procedures; patient rights; infection control policies and practices; handling, storage, use and disposal of hazardous materials; department and hospital emergency response policies and procedures. Skill in: Applying techniques used in one of the semi-skilled trade functions; reading and understanding technical manuals, blueprints and schematics; creating schematics for work completed; handling emergency situations; handling hazardous materials; using equipment and tools used in performing the skilled trade function assigned to; installing and servicing equipment; using equipment and hand tools such as amprobes, digital voltmeters, oscilloscopes, meters, circuit testers, hydrometers, screw drivers, wrenches, hammers, drills, saws and levels; communicating with a wide variety of people from diverse socio-economic and ethnic backgrounds; establishing and maintaining effective working relationships with all personnel contacted in the course of duties; efficient, effective and safe use of equipment. Physical Requirements and Working Conditions: Mobility to work in a shop, mechanical room, or related maintenance environment, including the operation of typical trade equipment, hand and power tools and standard office equipment; and to drive a motor vehicle to various work sites; stamina to stand, walk and climb and to work in confined or awkward spaces for extended periods of time; stamina to work under adverse environmental conditions for extended periods of time; vision to read printed materials and VDT screens; hearing and speech to communicate effectively over the telephone, radio and in-person. Strength and agility to exert up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of forces constantly to move objects. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this classification. The University Medical Center of Southern Nevada offers a comprehensive & competitive benefits package: Employer Paid Pension Plan through Nevada Public Employees' Retirement System "PERS"!https://www.nvpers.org/front Vestingin the pension plan after 5 years of qualifying employment! Health/Dental/Vision Insurance - Less than $20 per paycheck for employee-only coverage Consolidated Annual Leave (CAL) - CAL is used for personal leave, holidays (eleven scheduled holidays per year), doctor appointments, vacation, and sick days up to 16 consecutive scheduled work hours (short-term sick leave), etc. Extended Illness Bank (a/k/a Sick Bank) 457 Deferred Compensation Plan Comprehensive Group Health Insurance Plan Nevada has no State Income Tax No Social Security (FICA) Deduction As an academic medical center with a rich history of providing life-saving treatment in Southern Nevada, UMC serves as the anchor hospital of the Las Vegas Medical District, offering Nevada’s highest level of care to promote successful medical outcomes for patients. We are home to Nevada's ONLY Level I Trauma Center, Designated Pediatric Trauma Center, Burn Care Center, and Transplant Center. We are a Pathway Designated facility by ANCC, and we are on our journey to Magnet status. THE UNIVERSITY MEDICAL CENTER OF SOUTHERN NEVADA IS AN AFFIRMATIVE ACTION/ EQUAL OPPORTUNITY EMPLOYER Closing Date/Time: 9/23/2024 5:00 PM Pacific
Sep 17, 2024
Full Time
Position Summary EMPLOYER-PAID PENSION PLAN ( NEVADA PERS) COMPETITIVE SALARY & BENEFITS PACKAGE. As an academic medical center with a rich history of providing life-saving treatment in Southern Nevada, UMC serves as the anchor hospital of the Las Vegas Medical District, offering Nevada’s highest level of care to promote successful medical outcomes for patients. We are home to Nevada's ONLY Level I Trauma Center, Designated Pediatric Trauma Center, Burn Care Center, and Transplant Center. We are a Pathway Designated facility by ANCC, and we are on our journey to Magnet status. Position Summary: Performs the duties of one of the skilled trades, such as carpentry, electrical, electronics, plumbing, HVAC, welding, painting, etc., to maintain all clinical and non-clinical facilities equipment and furnishings. Duties may include repair work, Preventative maintenance routines, new maintenance projects, facility maintenance, etc. Job Requirement Education/Experience: Equivalent to graduation from high school and successful completion of a recognized apprenticeship in one of the trades and two (2) years of journey-level experience in the installation, maintenance and repair of building operating systems and facilities. Two (2) additional years of experience will be accepted in lieu of completion of an apprenticeship program. Licensing/Certification Requirements: Positions in this class may require one of the following licenses: carpenter, or; electrician, or; HVAC, or; plumber License, or; welder. Valid Class C Nevada driver's license is required. Additional and/or Preferred Position Requirements APPLICANTS WHO DOCUMENT THE FOLLOWING WILL BE GIVEN PREFERENCE: Local 501 Referrals ONLY Healthcare experience a plus Experience with electrical, (High Voltage, Generator, ATS), low voltage, plumbing/HVAC and electronic repair Possess a valid NEC/ICC electrical card and or a Clark County Journeymen plumbing license Knowledge, Skills, Abilities, and Physical Requirements Knowledge of: Codes, laws and regulations governing area of assignment; basic mathematical computations; systems in area of assignment and how systems interact and relate to one another; certain positions require knowledge of: electronic equipment, video surveillance systems, televisions and VCRs, public address systems and master antenna systems; Schematic diagrams; building schematics including electrical lines, alarms and electrical boxes; building structures, codes and standards such as American Disability Act requirements and fire codes; department and hospital safety practices and procedures; patient rights; infection control policies and practices; handling, storage, use and disposal of hazardous materials; department and hospital emergency response policies and procedures. Skill in: Applying techniques used in one of the semi-skilled trade functions; reading and understanding technical manuals, blueprints and schematics; creating schematics for work completed; handling emergency situations; handling hazardous materials; using equipment and tools used in performing the skilled trade function assigned to; installing and servicing equipment; using equipment and hand tools such as amprobes, digital voltmeters, oscilloscopes, meters, circuit testers, hydrometers, screw drivers, wrenches, hammers, drills, saws and levels; communicating with a wide variety of people from diverse socio-economic and ethnic backgrounds; establishing and maintaining effective working relationships with all personnel contacted in the course of duties; efficient, effective and safe use of equipment. Physical Requirements and Working Conditions: Mobility to work in a shop, mechanical room, or related maintenance environment, including the operation of typical trade equipment, hand and power tools and standard office equipment; and to drive a motor vehicle to various work sites; stamina to stand, walk and climb and to work in confined or awkward spaces for extended periods of time; stamina to work under adverse environmental conditions for extended periods of time; vision to read printed materials and VDT screens; hearing and speech to communicate effectively over the telephone, radio and in-person. Strength and agility to exert up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of forces constantly to move objects. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this classification. The University Medical Center of Southern Nevada offers a comprehensive & competitive benefits package: Employer Paid Pension Plan through Nevada Public Employees' Retirement System "PERS"!https://www.nvpers.org/front Vestingin the pension plan after 5 years of qualifying employment! Health/Dental/Vision Insurance - Less than $20 per paycheck for employee-only coverage Consolidated Annual Leave (CAL) - CAL is used for personal leave, holidays (eleven scheduled holidays per year), doctor appointments, vacation, and sick days up to 16 consecutive scheduled work hours (short-term sick leave), etc. Extended Illness Bank (a/k/a Sick Bank) 457 Deferred Compensation Plan Comprehensive Group Health Insurance Plan Nevada has no State Income Tax No Social Security (FICA) Deduction As an academic medical center with a rich history of providing life-saving treatment in Southern Nevada, UMC serves as the anchor hospital of the Las Vegas Medical District, offering Nevada’s highest level of care to promote successful medical outcomes for patients. We are home to Nevada's ONLY Level I Trauma Center, Designated Pediatric Trauma Center, Burn Care Center, and Transplant Center. We are a Pathway Designated facility by ANCC, and we are on our journey to Magnet status. THE UNIVERSITY MEDICAL CENTER OF SOUTHERN NEVADA IS AN AFFIRMATIVE ACTION/ EQUAL OPPORTUNITY EMPLOYER Closing Date/Time: 9/23/2024 5:00 PM Pacific
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
Parks & Recreation Facilities Maintenance Mechanic, Senior Posting Expires: Open Until Filled Salary: $21.71/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred. Preferred Qualifications A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
Sep 10, 2024
Full Time
Parks & Recreation Facilities Maintenance Mechanic, Senior Posting Expires: Open Until Filled Salary: $21.71/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred. Preferred Qualifications A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
Cal State University (CSU) San Jose
1 Washington Street, San Jose, CA 95192, USA
Job Summary Reporting to the Engineering Central Shops Department Lead, the equipment technician maintains equipment within the college, with a particular focus on Mechanical Engineering. The equipment technician assists with faculty and student projects. Key Responsibilities Maintains and upgrades equipment and instrumentation in Mechanical Engineering laboratories, such as robotics, mechatronics, controls, measurements, thermal systems, and mechanical design laboratories. Provides assistance as needed with mechanical- and aerodynamics-related equipment maintenance and upgrades in other departments in the College of Engineering. Assists with faculty and student projects as needed, particularly for Mechanical Engineering, including machining and fabricating parts and guiding students in the Engr 123 machine shop.. Ensures safe operation of department labs, club spaces, and Engr 123 machine shop. Inventories supplies and materials for Mechanical Engineering labs and Engr 123 machine shop. Orders parts, tools, and instruments. Participates as a member of College’s technician team. Interfaces collaboratively and effectively with other College technicians; assists other departments with technical issues when needed. Participates as a member of the building emergency response team Works with student assistant team to move furniture and equipment and make deliveries Programs and maintains omnilocks for the college Knowledge, Skills & Abilities Demonstrable skill in basic machine shop fabrication practices and tools such as mill, lathe, CNC, drill press, arc welder, CAD/CAM, 3D printing, and others. Ability to troubleshoot and repair, install and replace, modify and maintain equipment and associated instrumentation in mechanical/aerospace specializations down to the module level. Examples include pumps; vacuum units and gages; engines; pressure, temperature, strain, positioning, vibration, velocity and acceleration sensors and associated conditioning units; pneumatic and hydraulic actuators and controls, and electromechanical devices. Additional consideration will be given to those candidates with knowledge of data acquisition programs such as LabVIEW, instrumentation, and controls. Good communication skills; ability to work with diverse groups of people including department chair and faculty, students, other college technicians, facilities and operations, and vendors. Ability to identify and initiate tasks, to prioritize tasks, and to work independently. Ability and desire to learn new technical skills both on-the-job and through pertinent training. Required Qualifications (Only one of the three qualifications below must be met) 1. Equivalent to two years of journey-level or skilled experience in the maintenance, repair, and operation of scientific or technical equipment in the specialty area to which assigned such as mechanical, electromechanical, electronics or in the specialized category including construction and fabrication and some precision work or requiring trade or craft skills working with a variety of unique materials, or 2. Equivalent to two years of semi-skilled experience maintaining and repairing scientific or technical equipment or related experience in the type of equipment to which assigned as part of instructional support activities may be substituted for one year of the required experience, or 3. Equivalent to two years of trade school or technical arts training with specialization in the type of equipment repair to which assigned, completion of an apprenticeship program, or completion of a full military specialization in the required type of equipment maintenance and repair for one year of the required experience License A valid driver's license is required for this position. Out of state candidates selected for the position must obtain a State of California driver's license within 10 days of hire in accordance with the California Department of Motor Vehicles regulations. Once hired the employee must successfully complete the Defensive Driver Training Program provided by the State of California for California State University campuses. Preferred Qualifications Bachelor’s degree in technology or closely related field, or equivalent experience. Minimum of 5 years of experience in a technical environment Compensation Classification: Equipment Technician II - Mechanical Anticipated Hiring Range: $4,821/month - $5,056/month CSU Salary Range: $4,010/month - $7,254/month San José State University offers employees a comprehensive benefits package typically worth 30-35% of your base salary. For more information on programs available, please see the Employee Benefits Summary . Application Procedure Click Apply Now to complete the SJSU Online Employment Application and attach the following documents: Resume Letter of Interest All applicants must apply within the specified application period: October 9, 2023 through October 23, 2023 . This position is open until filled; however, applications received after screening has begun will be considered at the discretion of the university. Contact Information University Personnel jobs@sjsu.edu 408-924-2252 CSU Vaccination Policy The CSU strongly recommends that all individuals who access any in-person program or activity (on- or off-campus) operated or controlled by the University follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications and comply with other safety measures established by each campus. The system wide policy can be found at https://calstate.policystat.com/policy/9779821/latest/ and questions may be sent to jobs@sjsu.edu . Additional Information Satisfactory completion of a background check (including a criminal records check) is required for employment. SJSU will issue a contingent offer of employment to the selected candidate, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current CSU employee who was offered the position on a contingent basis. The standard background check includes: criminal check, employment and education verification. Depending on the position, a motor vehicle and/or credit check may be required. All background checks are conducted through the university's third party vendor, Accurate Background. Some positions may also require fingerprinting. SJSU will pay all costs associated with this procedure. Evidence of required degree(s) or certification(s) will be required at time of hire. SJSU IS NOT A SPONSORING AGENCY FOR STAFF OR MANAGEMENT POSITIONS. (e.g. H1-B VISAS) All San José State University employees are considered mandated reporters under the California Child Abuse and Neglect Reporting Act and are required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Incumbent is also required to promptly report any knowledge of a possible Title IX related incident to the Title IX Office or report any discrimination, harassment, and/or retaliation to the Office of Equal Opportunity. Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act and Campus Housing Fire Safety Notification: Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act, the Annual Security Report (ASR) is also now available for viewing at https://www.sjsu.edu/clery/docs/SJSU-Annual-Security-Report.pdf. The ASR contains the current security and safety-related policy statements, emergency preparedness and evacuation information, crime prevention and Sexual Assault prevention information, and information about drug and alcohol prevention programming. The ASR also contains statistics of Clery crimes for San José State University locations for the three most recent calendar years. A paper copy of the ASR is available upon request by contacting the Office of the Clery Director by phone at 408-924-1501 or by email at clerycompliance@sjsu.edu . Pursuant to the Higher Education Opportunity Act, the Annual Fire Safety Report (AFSR) is also available for viewing at https://www.sjsu.edu/clery/docs/SJSU-Annual-Fire-Safety-Report.pdf . The purpose of this report is to disclose statistics for fires that occurred within SJSU on-campus housing facilities for the three most recent calendar years, and to distribute fire safety policies and procedures intended to promote safety on Campus. A paper copy of the AFSR is available upon request by contacting the Housing Office by phone at 408-795-5600 or by email at uhs-frontdesk@sjsu.edu . Campus Security Authority - In accordance with the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act (Clery Act) and CSU systemwide policy, this position is subject to ongoing review for designation as a Campus Security Authority. Individuals that are designated as Campus Security Authorities are required to immediately report Clery incidents to the institution and complete Clery Act training as determined by the university Clery Director. Equal Employment Statement San José State University (SJSU) is an Equal Opportunity/Affirmative Action employer committed to nondiscrimination on the basis of age, ancestry, citizenship status, color, creed, disability, ethnicity, gender, genetic information, marital status, medical condition, national origin, race, religion or lack thereof, sex, sexual orientation, transgender, or protected veteran status consistent with applicable federal and state laws. This policy applies to all SJSU students, faculty and staff programs and activities. Title IX of the Education Amendments of 1972, and certain other federal and state laws, prohibit discrimination on the basis of sex in all education programs and activities operated by the university (both on and off campus). Advertised: Oct 09 2023 Pacific Daylight Time Applications close: Closing Date/Time:
Jul 14, 2024
Job Summary Reporting to the Engineering Central Shops Department Lead, the equipment technician maintains equipment within the college, with a particular focus on Mechanical Engineering. The equipment technician assists with faculty and student projects. Key Responsibilities Maintains and upgrades equipment and instrumentation in Mechanical Engineering laboratories, such as robotics, mechatronics, controls, measurements, thermal systems, and mechanical design laboratories. Provides assistance as needed with mechanical- and aerodynamics-related equipment maintenance and upgrades in other departments in the College of Engineering. Assists with faculty and student projects as needed, particularly for Mechanical Engineering, including machining and fabricating parts and guiding students in the Engr 123 machine shop.. Ensures safe operation of department labs, club spaces, and Engr 123 machine shop. Inventories supplies and materials for Mechanical Engineering labs and Engr 123 machine shop. Orders parts, tools, and instruments. Participates as a member of College’s technician team. Interfaces collaboratively and effectively with other College technicians; assists other departments with technical issues when needed. Participates as a member of the building emergency response team Works with student assistant team to move furniture and equipment and make deliveries Programs and maintains omnilocks for the college Knowledge, Skills & Abilities Demonstrable skill in basic machine shop fabrication practices and tools such as mill, lathe, CNC, drill press, arc welder, CAD/CAM, 3D printing, and others. Ability to troubleshoot and repair, install and replace, modify and maintain equipment and associated instrumentation in mechanical/aerospace specializations down to the module level. Examples include pumps; vacuum units and gages; engines; pressure, temperature, strain, positioning, vibration, velocity and acceleration sensors and associated conditioning units; pneumatic and hydraulic actuators and controls, and electromechanical devices. Additional consideration will be given to those candidates with knowledge of data acquisition programs such as LabVIEW, instrumentation, and controls. Good communication skills; ability to work with diverse groups of people including department chair and faculty, students, other college technicians, facilities and operations, and vendors. Ability to identify and initiate tasks, to prioritize tasks, and to work independently. Ability and desire to learn new technical skills both on-the-job and through pertinent training. Required Qualifications (Only one of the three qualifications below must be met) 1. Equivalent to two years of journey-level or skilled experience in the maintenance, repair, and operation of scientific or technical equipment in the specialty area to which assigned such as mechanical, electromechanical, electronics or in the specialized category including construction and fabrication and some precision work or requiring trade or craft skills working with a variety of unique materials, or 2. Equivalent to two years of semi-skilled experience maintaining and repairing scientific or technical equipment or related experience in the type of equipment to which assigned as part of instructional support activities may be substituted for one year of the required experience, or 3. Equivalent to two years of trade school or technical arts training with specialization in the type of equipment repair to which assigned, completion of an apprenticeship program, or completion of a full military specialization in the required type of equipment maintenance and repair for one year of the required experience License A valid driver's license is required for this position. Out of state candidates selected for the position must obtain a State of California driver's license within 10 days of hire in accordance with the California Department of Motor Vehicles regulations. Once hired the employee must successfully complete the Defensive Driver Training Program provided by the State of California for California State University campuses. Preferred Qualifications Bachelor’s degree in technology or closely related field, or equivalent experience. Minimum of 5 years of experience in a technical environment Compensation Classification: Equipment Technician II - Mechanical Anticipated Hiring Range: $4,821/month - $5,056/month CSU Salary Range: $4,010/month - $7,254/month San José State University offers employees a comprehensive benefits package typically worth 30-35% of your base salary. For more information on programs available, please see the Employee Benefits Summary . Application Procedure Click Apply Now to complete the SJSU Online Employment Application and attach the following documents: Resume Letter of Interest All applicants must apply within the specified application period: October 9, 2023 through October 23, 2023 . This position is open until filled; however, applications received after screening has begun will be considered at the discretion of the university. Contact Information University Personnel jobs@sjsu.edu 408-924-2252 CSU Vaccination Policy The CSU strongly recommends that all individuals who access any in-person program or activity (on- or off-campus) operated or controlled by the University follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications and comply with other safety measures established by each campus. The system wide policy can be found at https://calstate.policystat.com/policy/9779821/latest/ and questions may be sent to jobs@sjsu.edu . Additional Information Satisfactory completion of a background check (including a criminal records check) is required for employment. SJSU will issue a contingent offer of employment to the selected candidate, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current CSU employee who was offered the position on a contingent basis. The standard background check includes: criminal check, employment and education verification. Depending on the position, a motor vehicle and/or credit check may be required. All background checks are conducted through the university's third party vendor, Accurate Background. Some positions may also require fingerprinting. SJSU will pay all costs associated with this procedure. Evidence of required degree(s) or certification(s) will be required at time of hire. SJSU IS NOT A SPONSORING AGENCY FOR STAFF OR MANAGEMENT POSITIONS. (e.g. H1-B VISAS) All San José State University employees are considered mandated reporters under the California Child Abuse and Neglect Reporting Act and are required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Incumbent is also required to promptly report any knowledge of a possible Title IX related incident to the Title IX Office or report any discrimination, harassment, and/or retaliation to the Office of Equal Opportunity. Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act and Campus Housing Fire Safety Notification: Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act, the Annual Security Report (ASR) is also now available for viewing at https://www.sjsu.edu/clery/docs/SJSU-Annual-Security-Report.pdf. The ASR contains the current security and safety-related policy statements, emergency preparedness and evacuation information, crime prevention and Sexual Assault prevention information, and information about drug and alcohol prevention programming. The ASR also contains statistics of Clery crimes for San José State University locations for the three most recent calendar years. A paper copy of the ASR is available upon request by contacting the Office of the Clery Director by phone at 408-924-1501 or by email at clerycompliance@sjsu.edu . Pursuant to the Higher Education Opportunity Act, the Annual Fire Safety Report (AFSR) is also available for viewing at https://www.sjsu.edu/clery/docs/SJSU-Annual-Fire-Safety-Report.pdf . The purpose of this report is to disclose statistics for fires that occurred within SJSU on-campus housing facilities for the three most recent calendar years, and to distribute fire safety policies and procedures intended to promote safety on Campus. A paper copy of the AFSR is available upon request by contacting the Housing Office by phone at 408-795-5600 or by email at uhs-frontdesk@sjsu.edu . Campus Security Authority - In accordance with the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act (Clery Act) and CSU systemwide policy, this position is subject to ongoing review for designation as a Campus Security Authority. Individuals that are designated as Campus Security Authorities are required to immediately report Clery incidents to the institution and complete Clery Act training as determined by the university Clery Director. Equal Employment Statement San José State University (SJSU) is an Equal Opportunity/Affirmative Action employer committed to nondiscrimination on the basis of age, ancestry, citizenship status, color, creed, disability, ethnicity, gender, genetic information, marital status, medical condition, national origin, race, religion or lack thereof, sex, sexual orientation, transgender, or protected veteran status consistent with applicable federal and state laws. This policy applies to all SJSU students, faculty and staff programs and activities. Title IX of the Education Amendments of 1972, and certain other federal and state laws, prohibit discrimination on the basis of sex in all education programs and activities operated by the university (both on and off campus). Advertised: Oct 09 2023 Pacific Daylight Time Applications close: Closing Date/Time: