MISSOULA COUNTY, MONTANA
Missoula, Montana, United States
Definition This is a full-time opportunity with many benefits! As a Missoula County employee, you will be part of a team that is committed to positively impacting the community. The pay range for this position is $20.44 - $23.13 DOE.The Facilities Management Department is seeking a PREVENTIVE MAINTENANCE TECHNICIAN to join their team. This position will p erform preventive maintenance work on complex HVAC equipment to ensure peak efficiency and air quality standards set forth by code. Details: Priority screening will begin on Thursday , February 15, 2024 . It is in your best interest to apply by this date. Applications will continue to be accepted until an adequate applicant pool has been established, or the position has been filled. To Apply: Please complete all sections of the online application, even if a resume is requested. Please include with your completed application the following attachments: A letter of interest, a resume, and any relevant certifications. Incomplete applications will be disqualified. Complete job description available upon request to the Department of Human Resources. Representative Examples of Work Develops and maintains familiarity with County facilities; reports any maintenance issues or unsafe conditions to the supervisor; and notifies supervisor when supplies are needed. Performs preventive maintenance on heating and air conditioning systems and on generators at mountain transmitter sites. Performs preventive maintenance on low pressure boilers and adds chemical treatment as needed. Performs work to assist in the repair of building systems including: fire and security systems; tube system; inmate phone system; and video arraignment system. Makes plumbing repairs as assigned. Assists in changes of office layout in accordance with facility plans. Moves office furniture, files and equipment as needed. Assists in fire extinguishers maintenance. Performs grounds maintenance including snow removal, de-icing; lawn maintenance and work on lawn sprinkler systems. May assist community service or inmate workers to perform assigned tasks. Minimum Qualifications High school graduation or GED. Requires one year of work experience performing physical, manual labor. Preventive maintenance experience in a multi-building facility or other large operation preferred. SPECIAL REQUIREMENTS : Must possess a valid Montana Driver's License and pass an extensive background check. Physical/Environmental Demands The work requires considerable physical activity, occasionally in adverse weather conditions. Requires work in detention cells and exposure to inmates. Requires frequent walking, stooping, bending, climbing of stairs and ladders and lifting of moderate to very heavy objects (50 to 100 plus pounds) with the use of mechanical or people assists. The work requires the physical ability to operate a snowmobile, drive a four wheel drive motor vehicle, and operate a forklift. Requires work outside of the normal workday; requires carrying a cell phone. Work may cause exposure to health threats such as sewage and blood-borne pathogens. Located halfway between Yellowstone and Glacier National Parks and home to the University of Montana, Missoula is an academic center situated in an outdoor enthusiast’s paradise. Depending on the season, you can hike, ski, fish, float rivers, ride mountain bikes, or just sit back and marvel at the surrounding scenery. Join us in scenic, sophisticated, and service-oriented Missoula! Missoula County covers over 2,618 square miles of mountain lands varying in topography and climate from temperate river valleys to snow-capped peaks. Five large valleys and two major rivers wind through this mountainous region. Missoula County is large and diverse, featuring everything from the spectacular scenery of Clark Fork River running through town to lush ranches and a growing economy of small business. Skiers, outdoor enthusiasts, wildlife watchers, mothers and fathers, business owners, vacationers, fisherman, retirees, students, and many others have grown to love Missoula County's boundless opportunities. This summary outlines the benefit programs; actual benefits may vary depending on bargaining unit and employment status. Missoula County will reward your contributions to our community with competitive compensation and generous benefits, including but not limited to: Excellent Medical Health Benefits – Group health benefits, including dental and vision coverage, are available to eligible County employees. The medical health benefits premium is covered for full-time employees. The County contribution is pro-rated on hours paid for part-time employees. The employee pays the premium portion for dependent coverage. Family health benefits coverage is $258.00 per pay period. Medical deductible is $500 for an individual and $1,000 for a family. Flexible Benefits Plan – Pre-tax out-of-pocket medical expenses and day care expenses. Voluntary Life Insurance Coverage, Long and Short-Term Disability, Critical and Accident Insurance are offered through Mutual ofOmaha. Public Employees Retirement System – Montana public employees of the state, university system, local governments and certain employees of school districts are covered by the Public Employees Retirement System (PERS). New members to the PERS have an opportunity to choose between two retirement plan options: the Defined Benefit Plan or the Defined Contribution Plan. Sheriffs' Retirement System (SRS) – A public pension plan for all Montana Sheriffs hired after July 1, 1974 and Detention Officers hired after July 1, 2005. Public Service Loan Forgiveness - Working for Missoula County may qualify you to receive student loan forgiveness. Look here to learn more and understand whether you may be eligible. Supplemental Retirement Benefits are offered through Valic or Nationwide. Sick Leave – Full-time employees accrue 7.38hours per month and are eligible to use sick leave once you have been an employee for 90 days.The accrual is pro-rated for part-time employees. Vacation Leave – Full-time employees accrue 9.24 hours per month and are eligible to use leave after continuous employment for a period of 6 full months. The accrual is pro-rated for part-time employees. Holidays – The County observes eleven legal holidays in even numbered years and ten legal holidays in odd numbered years. Paid Parental Leave (PPL)- In recognition of the importance of bonding and care of a newborn child or a child placed for adoption, Missoula County 6 continuous weeks of PPL to eligible full-time employees that have been with the county for 180 days. The hours are pro-rated for part-time employees. Tuition Assistance - Because we value the professional and personal development of our employees, Missoula County is proud to offer reimbursement of certain education expenses.
Mar 08, 2024
Full Time
Definition This is a full-time opportunity with many benefits! As a Missoula County employee, you will be part of a team that is committed to positively impacting the community. The pay range for this position is $20.44 - $23.13 DOE.The Facilities Management Department is seeking a PREVENTIVE MAINTENANCE TECHNICIAN to join their team. This position will p erform preventive maintenance work on complex HVAC equipment to ensure peak efficiency and air quality standards set forth by code. Details: Priority screening will begin on Thursday , February 15, 2024 . It is in your best interest to apply by this date. Applications will continue to be accepted until an adequate applicant pool has been established, or the position has been filled. To Apply: Please complete all sections of the online application, even if a resume is requested. Please include with your completed application the following attachments: A letter of interest, a resume, and any relevant certifications. Incomplete applications will be disqualified. Complete job description available upon request to the Department of Human Resources. Representative Examples of Work Develops and maintains familiarity with County facilities; reports any maintenance issues or unsafe conditions to the supervisor; and notifies supervisor when supplies are needed. Performs preventive maintenance on heating and air conditioning systems and on generators at mountain transmitter sites. Performs preventive maintenance on low pressure boilers and adds chemical treatment as needed. Performs work to assist in the repair of building systems including: fire and security systems; tube system; inmate phone system; and video arraignment system. Makes plumbing repairs as assigned. Assists in changes of office layout in accordance with facility plans. Moves office furniture, files and equipment as needed. Assists in fire extinguishers maintenance. Performs grounds maintenance including snow removal, de-icing; lawn maintenance and work on lawn sprinkler systems. May assist community service or inmate workers to perform assigned tasks. Minimum Qualifications High school graduation or GED. Requires one year of work experience performing physical, manual labor. Preventive maintenance experience in a multi-building facility or other large operation preferred. SPECIAL REQUIREMENTS : Must possess a valid Montana Driver's License and pass an extensive background check. Physical/Environmental Demands The work requires considerable physical activity, occasionally in adverse weather conditions. Requires work in detention cells and exposure to inmates. Requires frequent walking, stooping, bending, climbing of stairs and ladders and lifting of moderate to very heavy objects (50 to 100 plus pounds) with the use of mechanical or people assists. The work requires the physical ability to operate a snowmobile, drive a four wheel drive motor vehicle, and operate a forklift. Requires work outside of the normal workday; requires carrying a cell phone. Work may cause exposure to health threats such as sewage and blood-borne pathogens. Located halfway between Yellowstone and Glacier National Parks and home to the University of Montana, Missoula is an academic center situated in an outdoor enthusiast’s paradise. Depending on the season, you can hike, ski, fish, float rivers, ride mountain bikes, or just sit back and marvel at the surrounding scenery. Join us in scenic, sophisticated, and service-oriented Missoula! Missoula County covers over 2,618 square miles of mountain lands varying in topography and climate from temperate river valleys to snow-capped peaks. Five large valleys and two major rivers wind through this mountainous region. Missoula County is large and diverse, featuring everything from the spectacular scenery of Clark Fork River running through town to lush ranches and a growing economy of small business. Skiers, outdoor enthusiasts, wildlife watchers, mothers and fathers, business owners, vacationers, fisherman, retirees, students, and many others have grown to love Missoula County's boundless opportunities. This summary outlines the benefit programs; actual benefits may vary depending on bargaining unit and employment status. Missoula County will reward your contributions to our community with competitive compensation and generous benefits, including but not limited to: Excellent Medical Health Benefits – Group health benefits, including dental and vision coverage, are available to eligible County employees. The medical health benefits premium is covered for full-time employees. The County contribution is pro-rated on hours paid for part-time employees. The employee pays the premium portion for dependent coverage. Family health benefits coverage is $258.00 per pay period. Medical deductible is $500 for an individual and $1,000 for a family. Flexible Benefits Plan – Pre-tax out-of-pocket medical expenses and day care expenses. Voluntary Life Insurance Coverage, Long and Short-Term Disability, Critical and Accident Insurance are offered through Mutual ofOmaha. Public Employees Retirement System – Montana public employees of the state, university system, local governments and certain employees of school districts are covered by the Public Employees Retirement System (PERS). New members to the PERS have an opportunity to choose between two retirement plan options: the Defined Benefit Plan or the Defined Contribution Plan. Sheriffs' Retirement System (SRS) – A public pension plan for all Montana Sheriffs hired after July 1, 1974 and Detention Officers hired after July 1, 2005. Public Service Loan Forgiveness - Working for Missoula County may qualify you to receive student loan forgiveness. Look here to learn more and understand whether you may be eligible. Supplemental Retirement Benefits are offered through Valic or Nationwide. Sick Leave – Full-time employees accrue 7.38hours per month and are eligible to use sick leave once you have been an employee for 90 days.The accrual is pro-rated for part-time employees. Vacation Leave – Full-time employees accrue 9.24 hours per month and are eligible to use leave after continuous employment for a period of 6 full months. The accrual is pro-rated for part-time employees. Holidays – The County observes eleven legal holidays in even numbered years and ten legal holidays in odd numbered years. Paid Parental Leave (PPL)- In recognition of the importance of bonding and care of a newborn child or a child placed for adoption, Missoula County 6 continuous weeks of PPL to eligible full-time employees that have been with the county for 180 days. The hours are pro-rated for part-time employees. Tuition Assistance - Because we value the professional and personal development of our employees, Missoula County is proud to offer reimbursement of certain education expenses.
MASSACHUSETTS TRIAL COURT
Salem, Massachusetts, United States
Title: Maintenance Tech-Salem Pay Grade: Grade 9 Starting Pay: $45,943.50/Yr. Departmental Mission Statement: The Facilities Management and Capital Planning department provides for the management and maintenance of 62 state-owned courthouses, and 42 leased facilities located in ten counties of the Commonwealth. The Department is committed to administering effective property management, facility operations, facility renewal, and the delivery of quality customer service in support of the administration of justice throughout the Commonwealth. Facilities Management & Capital Planning Department: Notes: The hours for this position is 6:00am-2:00pm. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. Position Summary: • This series is responsible for assisting in a range of skilled trades duties for both licensed and unlicensed trades. • Duties focus on the application of complex materials and compounds consistent with general contracting work. • Other duties include providing assistance in repairing, installing, and testing various types of systems and equipment. • A classification above the entry level requires the performance of increasingly more responsible and complex work which requires advanced skill and experience. • Employees are appointed at the entry level and are eligible for reclassification to the higher grade within this series consistent with the requirements in the job description. • The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Receives moderate supervision from the Facilities Supervisor in performing structured but not always routine work. • Moderate judgment is required. ORGANIZATIONAL LEVELS : Maintenance Technician I - This is the entry level position title within this series. • Employees at this level are expected to perform minor repairs and improvements in a variety of trades under the direction of a building or maintenance supervisor. • Maintenance Technician II - This is the second level position title within this series. • Employees at this level are expected begin to develop a trade of expertise utilized by the Court Facilities Bureau and have the ability to work independently in the performance of standard maintenance and repairs. Maintenance Technician I Duties : The following list of major duties represents a composite list of typical duties performed by individuals in this position. • Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division: • Assists in servicing and replacing minor plumbing fixtures. • Performs minor electrical work not requiring a licensed electrician such as replacing light bulbs and fuses. • Assists in minor carpentry and repair work. • Maintain machinery, equipment, and tools by cleaning, lubricating, greasing, and oiling, to ensure optimum working order. • Applies paint, varnish, and stain to all types of surfaces in order to protect and beautify surfaces using appropriate tools and equipment; and performs related duties as required. • Maintenance Technician II Duties: Performs preventive maintenance and makes repairs to heating, ventilating, air conditioning equipment according to instructions such as replacing belts on motors, changing filters, bearings, etc. • Maintains and makes routine repairs to electrically powered equipment and appliances according to instruction from senior technicians and equipment service manual. • Apply carpentry techniques and using carpentry tools to construct, alter, repair, and/or install walls, stairs, floors, ceiling, windows, doors, roofs, gutters, and locks. • Perform structural repair, alterations, or improvement work such as preparing surfaces for plaster or cement work; studding, wiring, and plastering walls. • Install glass in doors and windows; All duties covered under Maintenance Technician I; and performs related duties as required. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas. • Ethics and Values: Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. • Mission: Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. • Problem Solving: Accurately assesses maintenance problems of a routine nature and initiates corrective action. • Continuous Learning: Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. • Commitment to Diversity: Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. • Customer Service: Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. • Collaboration: Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Maintenance Technician: • Maintenance Technician I Requirements: A high school diploma and at least one year of general building repair and maintenance; or an equivalent combination of education and experience. • Knowledge in a variety of trade areas common to the field of building maintenance • Knowledge of the use and operation of hand tools, power tools, and equipment • Ability to lift and carry heavy objects. • Ability to climb and work on scaffolds and ladders, Physical stamina, and endurance. • Additional Requirements for Maintenance Technician II: A minimum of two years' experience working at the entry level. • A demonstration of competence and expertise in an area of specialization consistent with licensed and unlicensed trades utilized by the Court Facilities Bureau • The acquisition of a trade or technical license where applicable is preferred. • Ability to give direction and instruction to senior staff. Closing Date/Time: 2024-06-25
Mar 22, 2024
Full Time
Title: Maintenance Tech-Salem Pay Grade: Grade 9 Starting Pay: $45,943.50/Yr. Departmental Mission Statement: The Facilities Management and Capital Planning department provides for the management and maintenance of 62 state-owned courthouses, and 42 leased facilities located in ten counties of the Commonwealth. The Department is committed to administering effective property management, facility operations, facility renewal, and the delivery of quality customer service in support of the administration of justice throughout the Commonwealth. Facilities Management & Capital Planning Department: Notes: The hours for this position is 6:00am-2:00pm. This position is designated as a union position and is covered by the Collective Bargaining Agreement with O.P.E.I.U., Local 6. This position may be considered essential personnel in certain emergencies and may be required to work outside of regularly scheduled hours, including staying late or coming in early. Position Summary: • This series is responsible for assisting in a range of skilled trades duties for both licensed and unlicensed trades. • Duties focus on the application of complex materials and compounds consistent with general contracting work. • Other duties include providing assistance in repairing, installing, and testing various types of systems and equipment. • A classification above the entry level requires the performance of increasingly more responsible and complex work which requires advanced skill and experience. • Employees are appointed at the entry level and are eligible for reclassification to the higher grade within this series consistent with the requirements in the job description. • The position title reverts to the entry level of this series when there is a vacancy. SUPERVISION RECEIVED: Receives moderate supervision from the Facilities Supervisor in performing structured but not always routine work. • Moderate judgment is required. ORGANIZATIONAL LEVELS : Maintenance Technician I - This is the entry level position title within this series. • Employees at this level are expected to perform minor repairs and improvements in a variety of trades under the direction of a building or maintenance supervisor. • Maintenance Technician II - This is the second level position title within this series. • Employees at this level are expected begin to develop a trade of expertise utilized by the Court Facilities Bureau and have the ability to work independently in the performance of standard maintenance and repairs. Maintenance Technician I Duties : The following list of major duties represents a composite list of typical duties performed by individuals in this position. • Specific duties performed by an incumbent will vary depending upon the Division and the department within the Division: • Assists in servicing and replacing minor plumbing fixtures. • Performs minor electrical work not requiring a licensed electrician such as replacing light bulbs and fuses. • Assists in minor carpentry and repair work. • Maintain machinery, equipment, and tools by cleaning, lubricating, greasing, and oiling, to ensure optimum working order. • Applies paint, varnish, and stain to all types of surfaces in order to protect and beautify surfaces using appropriate tools and equipment; and performs related duties as required. • Maintenance Technician II Duties: Performs preventive maintenance and makes repairs to heating, ventilating, air conditioning equipment according to instructions such as replacing belts on motors, changing filters, bearings, etc. • Maintains and makes routine repairs to electrically powered equipment and appliances according to instruction from senior technicians and equipment service manual. • Apply carpentry techniques and using carpentry tools to construct, alter, repair, and/or install walls, stairs, floors, ceiling, windows, doors, roofs, gutters, and locks. • Perform structural repair, alterations, or improvement work such as preparing surfaces for plaster or cement work; studding, wiring, and plastering walls. • Install glass in doors and windows; All duties covered under Maintenance Technician I; and performs related duties as required. Job Competencies: All applicants must be able, through the interview process, to demonstrate knowledge and understanding of the following areas. • Ethics and Values: Communicates and demonstrates the ethics and values of the Court Facilities Department and the Trial Court. • Mission: Understands, upholds, and communicates the Trial Court and Court Facilities Department missions. Applied Knowledge Understands standard facility management methods, codes, and operational best practices. • Problem Solving: Accurately assesses maintenance problems of a routine nature and initiates corrective action. • Continuous Learning: Demonstrates a commitment to continuously improve himself or herself through training and making use of new methods and equipment. • Commitment to Diversity: Promotes an environment of diversity through understanding, respect, and positive communication with persons of varied racial, ethnic, economic, and cultural backgrounds. • Customer Service: Contributes to a departmental environment emphasizing conduct that is courteous and professional toward both Trial Court employees and the public. • Collaboration: Works with others cooperatively, and demonstrates teamwork, contributing to a work environment that focuses on shared goals. Minimum Requirements: These are the minimum requirements necessary to apply for the position of Maintenance Technician: • Maintenance Technician I Requirements: A high school diploma and at least one year of general building repair and maintenance; or an equivalent combination of education and experience. • Knowledge in a variety of trade areas common to the field of building maintenance • Knowledge of the use and operation of hand tools, power tools, and equipment • Ability to lift and carry heavy objects. • Ability to climb and work on scaffolds and ladders, Physical stamina, and endurance. • Additional Requirements for Maintenance Technician II: A minimum of two years' experience working at the entry level. • A demonstration of competence and expertise in an area of specialization consistent with licensed and unlicensed trades utilized by the Court Facilities Bureau • The acquisition of a trade or technical license where applicable is preferred. • Ability to give direction and instruction to senior staff. Closing Date/Time: 2024-06-25
City of Kansas City, MO
Kansas City, Missouri, United States
Full-time position available with the Aviation Department, with the Aviation Fleet Maintenance Division located at 125 Paris Street Salary Range: $23.98-$36.60/hour Normal Work Days/Hours: Monday-Friday 7:00 AM-3:30PM * Mandatory overtime during inclement weather and emergencies. Application Deadline Date: Open Until Filled (OUF) Responsibilities Repairs and maintains automobiles, light and heavy-duty trucks, medium duty shuttle buses, heavy duty runway snow removal equipment and other mechanical or construction equipment, and specialized Airport vehicles and/or construction equipment such as back hoes, cranes, and front end loaders, etc. -Conducts required annual vehicles state inspection to certify the road worthiness of departmental equipment. Performs scheduled preventive maintenance, which includes but not limited to replacing fluids, filters, lubes chassis, complete inspection and adjustment of vehicles, tires, chassis parts, brakes, lights, etc. Changes and repairs tires and tubes, services batteries, adjusts brakes, installs exhaust systems, engine components, spark plugs. Performs overhaul and repair work in different types of gas, diesel, and CNG engines, repairs to alternators, generators, carburetors, clutches, ignitions systems, replaces springs, axles, differentials, air conditions systems, hydraulic systems. Performs electrical work and trouble-shooting of all equipment. Cleans work areas, keeping them free from grease, oil and debris. Qualifications REQUIRES 3 years of experience as an automotive technician, including 1 year in the repair and maintenance of heavy duty automotive and construction equipment; OR an equivalent combination of qualifying education and experience, which may include the successful completion of an automotive repair trade school or the successful completion of a vocational technical program in automotive maintenance or completion of the Automotive Service Excellence (ASE) certification as a master automotive/truck technician. Must possess a valid State-issued driver's license in accordance with the City of KCMO policies. Must possess a valid Missouri Class A, B or C CDL prior to the end of the employee's probationary period as determined by the department. Must possess a valid State of Missouri Inspector Mechanic Permit prior to the end of the employee's probationary period. Must pass a preemployment drug screen and post offer physical examination as prescribed by the City. Other Information URGENT!!! CRITICAL RECRUITMENT INFORMATION Applications and/or resumes are evaluated on the information received by the application deadline. Please ensure that your application or resume clearly demonstrates how you meet the minimum qualifications for the position for which you are applying, this includes providing all relevant educational dates and a detailed description of relevant work experience, including months/years of employment. Applications and/or resumes may not be considered if information is incomplete. In order for a resume to be used in lieu of an application the resume must have been submitted online via the City's Applicant Tracking System. Positions requiring a high school diploma/GED certificate must be obtained from a school/program accredited by the Department of Education and recognized by the U.S. Secretary of Education. The minimum education requirement for positions that allow for experience equivalency for an accredited degree is a high school diploma. Unless otherwise specified, an accredited degree must be obtained from a college or university listed with the U.S. Department of Education and recognized by the U.S. Secretary of Education. For positions with a salary grade of EX6 or higher that require an accredited degree, qualifying professional experience must be obtained AFTER the accredited degree is obtained. Successful completion of a pre-employment criminal history/background check is required for all positions. Some positions require a post offer drug screen and/or physical. If appointed, non-residents must obtain residency inside Kansas City, Missouri's city limits within nine months. The City of KCMO is an equal opportunity employer that values diversity and inclusion in the workplace. The City is committed to providing a workplace environment for its employees and citizens free from discrimination based on race, color, sex (including pregnancy), national origin, religion, age, disability, marital status, genetic information, sexual orientation, or gender identity. For more information, please see our EEO Policy The City of KCMO is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call 816-513-1908 or send an e-mail to accommodations@kcmo.org . If claiming military veterans' preference points, you must attach a copy of your DD-214 or a DD-256 (for reservists). To claim veterans' points you must have served 180 days of regular active duty service and be discharged or released under honorable conditions during peacetimes or 90 days of active duty service, one (1) day during "wartime" and a last discharge or release under honorable conditions. (DOD) 38 U.S. Code • 4211).
Mar 08, 2024
Full Time
Full-time position available with the Aviation Department, with the Aviation Fleet Maintenance Division located at 125 Paris Street Salary Range: $23.98-$36.60/hour Normal Work Days/Hours: Monday-Friday 7:00 AM-3:30PM * Mandatory overtime during inclement weather and emergencies. Application Deadline Date: Open Until Filled (OUF) Responsibilities Repairs and maintains automobiles, light and heavy-duty trucks, medium duty shuttle buses, heavy duty runway snow removal equipment and other mechanical or construction equipment, and specialized Airport vehicles and/or construction equipment such as back hoes, cranes, and front end loaders, etc. -Conducts required annual vehicles state inspection to certify the road worthiness of departmental equipment. Performs scheduled preventive maintenance, which includes but not limited to replacing fluids, filters, lubes chassis, complete inspection and adjustment of vehicles, tires, chassis parts, brakes, lights, etc. Changes and repairs tires and tubes, services batteries, adjusts brakes, installs exhaust systems, engine components, spark plugs. Performs overhaul and repair work in different types of gas, diesel, and CNG engines, repairs to alternators, generators, carburetors, clutches, ignitions systems, replaces springs, axles, differentials, air conditions systems, hydraulic systems. Performs electrical work and trouble-shooting of all equipment. Cleans work areas, keeping them free from grease, oil and debris. Qualifications REQUIRES 3 years of experience as an automotive technician, including 1 year in the repair and maintenance of heavy duty automotive and construction equipment; OR an equivalent combination of qualifying education and experience, which may include the successful completion of an automotive repair trade school or the successful completion of a vocational technical program in automotive maintenance or completion of the Automotive Service Excellence (ASE) certification as a master automotive/truck technician. Must possess a valid State-issued driver's license in accordance with the City of KCMO policies. Must possess a valid Missouri Class A, B or C CDL prior to the end of the employee's probationary period as determined by the department. Must possess a valid State of Missouri Inspector Mechanic Permit prior to the end of the employee's probationary period. Must pass a preemployment drug screen and post offer physical examination as prescribed by the City. Other Information URGENT!!! CRITICAL RECRUITMENT INFORMATION Applications and/or resumes are evaluated on the information received by the application deadline. Please ensure that your application or resume clearly demonstrates how you meet the minimum qualifications for the position for which you are applying, this includes providing all relevant educational dates and a detailed description of relevant work experience, including months/years of employment. Applications and/or resumes may not be considered if information is incomplete. In order for a resume to be used in lieu of an application the resume must have been submitted online via the City's Applicant Tracking System. Positions requiring a high school diploma/GED certificate must be obtained from a school/program accredited by the Department of Education and recognized by the U.S. Secretary of Education. The minimum education requirement for positions that allow for experience equivalency for an accredited degree is a high school diploma. Unless otherwise specified, an accredited degree must be obtained from a college or university listed with the U.S. Department of Education and recognized by the U.S. Secretary of Education. For positions with a salary grade of EX6 or higher that require an accredited degree, qualifying professional experience must be obtained AFTER the accredited degree is obtained. Successful completion of a pre-employment criminal history/background check is required for all positions. Some positions require a post offer drug screen and/or physical. If appointed, non-residents must obtain residency inside Kansas City, Missouri's city limits within nine months. The City of KCMO is an equal opportunity employer that values diversity and inclusion in the workplace. The City is committed to providing a workplace environment for its employees and citizens free from discrimination based on race, color, sex (including pregnancy), national origin, religion, age, disability, marital status, genetic information, sexual orientation, or gender identity. For more information, please see our EEO Policy The City of KCMO is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call 816-513-1908 or send an e-mail to accommodations@kcmo.org . If claiming military veterans' preference points, you must attach a copy of your DD-214 or a DD-256 (for reservists). To claim veterans' points you must have served 180 days of regular active duty service and be discharged or released under honorable conditions during peacetimes or 90 days of active duty service, one (1) day during "wartime" and a last discharge or release under honorable conditions. (DOD) 38 U.S. Code • 4211).
TEXAS PARKS AND WILDLIFE
Rockport, Texas, United States
TPWD MISSION To manage and conserve the natural and cultural resources of Texas and to provide hunting, fishing and outdoor recreation opportunities for the use and enjoyment of present and future generations. PLEASE NOTE: All applications must contain complete job histories, which includes job title, dates of employment (month/year) and hours worked per week, name of employer, supervisor's name and phone number and a description of duties performed. Job history and volunteer experience should be listed in the work history section of the application to receive credit towards meeting the minimum requirements. Part-time experience credit is prorated based on the duration and hours worked per week. Please indicate hours worked for part-time/temporary/seasonal experience. If this information is not submitted, your application will be considered incomplete. Applications with "See attached" or "See resume" will not be accepted in lieu of a completed application. Omission of data can be the basis for disqualification; you may state 'unknown' for any incomplete fields. If education is used to meet the minimum requirements of the job posting, a copy of a college transcript(s) issued from the registrar must be provided if you are selected for an interview. WATCH OUR VIDEO ON HOW TO APPLY FOR JOBS APPLICATIONS SUBMITTED THROUGH WORK IN TEXAS: Work In Texas (WIT) applicants must complete the supplemental questions to be considered for the posting. To complete the supplemental questions, go to CAPPS Recruit to register or login. CAPPS Recruit, https://capps.taleo.net/careersection/ex/jobsearch.ftl?lang=en MILITARY OCCUPATIONAL SPECIALTY CODES: Job Classification Service Military Specialty Maintenance Specialist I-V Army 12C, 12G, 12N, 12V, 12W, 91C, 91E, 91J, 91L, 914A Maintenance Specialist I-V Navy AB, AN, BM, BU, CM, CN, DC, EO, FN, HT, SN, SW, 914A Maintenance Specialist I-V Coast Guard BM, DC, MK, DOSN, ENG, MAT Maintenance Specialist I-V Marine Corps 1169, 1171, 1300, 1316, 1371 Maintenance Specialist I-V Air Force 3E2X1, 3E3X1, 3E4X1, 3E4X3 *More information on military occupational specialty codes can be found below: https://www.onetonline.org/crosswalk/MOC/ https://hr.sao.texas.gov/Compensation/MilitaryCrosswalk/MilitaryCrosswalkGuide.pdf MILITARY EMPLOYMENT PREFERENCE: If you choose to claim military employment preference as outlined by the State of Texas, you must complete the TPWD Military Employment Preference Survey and attach this form and required documentation referenced on this form at the time your application is submitted . If you have questions regarding this requirement, please visit our Military Employment Reference page at https://tpwd.texas.gov/jobs/veterans/ Required forms that will need to be attached with application for Military Employment Preference: 1. Veteran- DD214 showing honorable discharge. 2. Surviving spouse of a veteran who has not remarried- Marriage Certificate and DD Form 1300 or appropriate documentation. 3. Orphan of a veteran killed while on active duty- Birth Certificate and DD Form 1300 or appropriate documentation. 4. Spouse of a member of the US Armed Forces/Texas National Guard serving on Active Duty- Marriage Certificate and copy of spouses active duty military orders. 5. Spouse of a veteran with disability and is the primary income for household- Marriage Certificate, Veterans DD214, and VA Benefits Summary Letter showing disability rating. Documentation must be attached to the application before military preference can be granted. BENEFITS: Texas Parks and Wildlife offers a variety of benefits for employees such as generous paid time off, group insurance, retirement and pension, and frequent training and staff development opportunities. Other benefits include longevity pay, merit pay, deferred compensation, flexible benefit plans, 401K/457 retirement plans, direct deposit, telework, staggered work hours, Employee Assistance Program and a Return to Work Program. For new employees or rehires, health insurance is available the 1st of the following month after a 60-day waiting period. Click HERE to view our Benefits page. HIRING CONTACT: Ed Corbett, (361) 441-7205 PHYSICAL WORK ADDRESS: TPWD State Park Region 2 Office, 715 HWY 35 S, Rockport, TX 78382 GENERAL DESCRIPTION: Under the direction of the Regional Maintenance Specialist, this position performs advanced (senior-level) construction, restoration, renovation, and maintenance work and is responsible for providing assistance to Region 2 State Parks. Conducts complex work in several skilled construction trades such as carpentry, roofing, concrete, masonry, electrical, plumbing and welding. Performs difficult and critical phases/tasks involved in the repair and construction of buildings, utility systems and other facilities. Responsible for material specification/estimation and material/labor cost estimation. Supervises and trains other individuals performing work that involves a specific trade. Required to work on special park-based projects, assist with special events and working natural disasters throughout the state. Assists in facility management of all Region 2 sites. Assists in performing facility inspections and safety audits. Works under minimal supervision with considerable latitude for the use of initiative and independent judgment. Performs additional duties as assigned. Complies with all Agency, Division and Branch rules, regulations and procedures. Qualifications: MINIMUM QUALIFICATIONS: Education: Graduation from High School or GED. Experience: Four years experience in building and equipment maintenance such as carpentry, roofing, masonry, painting, electrical, plumbing and welding. Licensure: Must possess a valid class "A" Texas Commercial driver's license OR must possess or be able to obtain, within 30 days of employment, a valid class "C" Texas driver's license and convert to a class "A" Commercial driver's license within 12 months of employment; Required to pass the air brake component of a class "A" Commercial driver's license standard examination. NOTE: Retention of position is contingent upon obtaining and maintaining required licenses and compliance with State and Federal regulations including the Department of Transportation (DOT) required drug and alcohol testing. PREFERRED QUALIFICATIONS: Education: Training related to designated building trades(s) and/or areas of expertise; Graduation from a standard senior high school or equivalent, supplemented by vocational training in a designated trade. Experience: Experience in construction, maintenance, and repair work. Licensure: Certification associated with designated building trade(s) training; A current valid class "A" Commercial Texas driver's license. KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of conventional and historic building techniques, materials, equipment, and tools; Knowledge of advanced plumbing, carpentry, electrical, masonry, mechanical maintenance, and repair tasks; Knowledge of OSHA and state safety regulations; Knowledge of State purchasing procedures and regulations; Knowledge of basic mathematics; Skill in using MS Word, Excel, and Outlook; Skill in equipment and electronic maintenance; Skill in selecting appropriate tools and equipment and in troubleshooting situations to determine appropriate actions to resolve problems; Skill in effective verbal and written communication; Skill in using the tools, equipment and materials associated with designated building trades; Skill in the use of hand and power tools, mowers, trimmers, chain saws, tractors, vehicles, generators, and other mechanical equipment; Skill in planning, assigning and/or supervising the work of others; Skill in providing quality customer service in a courteous and professional manner; Skill in establishing and maintaining effective work relationships with co-workers and work-related contacts; Skill in making independent, sound, and timely decisions; Skill in participating as team member, cooperating with both co-workers and management to effectively accomplish regional goals; Skill in project management of multi-discipline programming; Skill in training others; Ability to read and interpret construction plans and specifications; Ability to organize preventive maintenance programs; Ability to apply proper methods, techniques and procedures in the maintenance and repair of buildings, vehicles, and equipment; Ability to interpret drawings, diagrams, and blueprints; Ability to communicate effectively; Ability to perform maintenance and repairs, to diagnose malfunctioning units, to maintain records; Ability to estimate construction labor and material costs; Ability to perform materials take-offs/estimates and to prepare lists for purchase; Ability to provide direction and guidance to others; Ability to work independently with little or no supervision; Ability to work as a member of a team; Ability to purchase supplies, materials, services, and equipment per departmental and state regulations; Ability to maintain flexibility and work with frequent interruptions and multiple changing priorities; Ability to perform manual labor including, lifting supplies and materials up to 50 lbs.; Ability conduct work activities in accordance with TPWD safety program. WORKING CONDITIONS: Required to work 40 hours per week with hours other than 8:00 a.m. to 5:00 p.m. and days off other than Saturdays, Sundays and holidays; Required to perform work outdoors, occasionally in adverse weather conditions; Must be willing to reside in shared housing with other crewmembers; Required to work overtime as necessary; Required to travel 80% with possible overnight stays; Required to use appropriate safety procedures and equipment; Required to perform manual labor including, lifting supplies and materials up to 50 lbs.; Required to operate a State vehicle; Required to pass drug screening prior to employment; Required to pass a previous employment drug testing history verification for all CDL positions held within the past two years; Subject to random, post incident and reasonable cause testing for the duration of employment; Must conform to TPWD dress and grooming standards, work rules and safety procedures; Non-smoking environment in State vehicles and buildings. TPWD IS AN EQUAL OPPORTUNITY EMPLOYER Closing Date: Apr 2, 2024, 11:59:00 PM
Mar 20, 2024
Full Time
TPWD MISSION To manage and conserve the natural and cultural resources of Texas and to provide hunting, fishing and outdoor recreation opportunities for the use and enjoyment of present and future generations. PLEASE NOTE: All applications must contain complete job histories, which includes job title, dates of employment (month/year) and hours worked per week, name of employer, supervisor's name and phone number and a description of duties performed. Job history and volunteer experience should be listed in the work history section of the application to receive credit towards meeting the minimum requirements. Part-time experience credit is prorated based on the duration and hours worked per week. Please indicate hours worked for part-time/temporary/seasonal experience. If this information is not submitted, your application will be considered incomplete. Applications with "See attached" or "See resume" will not be accepted in lieu of a completed application. Omission of data can be the basis for disqualification; you may state 'unknown' for any incomplete fields. If education is used to meet the minimum requirements of the job posting, a copy of a college transcript(s) issued from the registrar must be provided if you are selected for an interview. WATCH OUR VIDEO ON HOW TO APPLY FOR JOBS APPLICATIONS SUBMITTED THROUGH WORK IN TEXAS: Work In Texas (WIT) applicants must complete the supplemental questions to be considered for the posting. To complete the supplemental questions, go to CAPPS Recruit to register or login. CAPPS Recruit, https://capps.taleo.net/careersection/ex/jobsearch.ftl?lang=en MILITARY OCCUPATIONAL SPECIALTY CODES: Job Classification Service Military Specialty Maintenance Specialist I-V Army 12C, 12G, 12N, 12V, 12W, 91C, 91E, 91J, 91L, 914A Maintenance Specialist I-V Navy AB, AN, BM, BU, CM, CN, DC, EO, FN, HT, SN, SW, 914A Maintenance Specialist I-V Coast Guard BM, DC, MK, DOSN, ENG, MAT Maintenance Specialist I-V Marine Corps 1169, 1171, 1300, 1316, 1371 Maintenance Specialist I-V Air Force 3E2X1, 3E3X1, 3E4X1, 3E4X3 *More information on military occupational specialty codes can be found below: https://www.onetonline.org/crosswalk/MOC/ https://hr.sao.texas.gov/Compensation/MilitaryCrosswalk/MilitaryCrosswalkGuide.pdf MILITARY EMPLOYMENT PREFERENCE: If you choose to claim military employment preference as outlined by the State of Texas, you must complete the TPWD Military Employment Preference Survey and attach this form and required documentation referenced on this form at the time your application is submitted . If you have questions regarding this requirement, please visit our Military Employment Reference page at https://tpwd.texas.gov/jobs/veterans/ Required forms that will need to be attached with application for Military Employment Preference: 1. Veteran- DD214 showing honorable discharge. 2. Surviving spouse of a veteran who has not remarried- Marriage Certificate and DD Form 1300 or appropriate documentation. 3. Orphan of a veteran killed while on active duty- Birth Certificate and DD Form 1300 or appropriate documentation. 4. Spouse of a member of the US Armed Forces/Texas National Guard serving on Active Duty- Marriage Certificate and copy of spouses active duty military orders. 5. Spouse of a veteran with disability and is the primary income for household- Marriage Certificate, Veterans DD214, and VA Benefits Summary Letter showing disability rating. Documentation must be attached to the application before military preference can be granted. BENEFITS: Texas Parks and Wildlife offers a variety of benefits for employees such as generous paid time off, group insurance, retirement and pension, and frequent training and staff development opportunities. Other benefits include longevity pay, merit pay, deferred compensation, flexible benefit plans, 401K/457 retirement plans, direct deposit, telework, staggered work hours, Employee Assistance Program and a Return to Work Program. For new employees or rehires, health insurance is available the 1st of the following month after a 60-day waiting period. Click HERE to view our Benefits page. HIRING CONTACT: Ed Corbett, (361) 441-7205 PHYSICAL WORK ADDRESS: TPWD State Park Region 2 Office, 715 HWY 35 S, Rockport, TX 78382 GENERAL DESCRIPTION: Under the direction of the Regional Maintenance Specialist, this position performs advanced (senior-level) construction, restoration, renovation, and maintenance work and is responsible for providing assistance to Region 2 State Parks. Conducts complex work in several skilled construction trades such as carpentry, roofing, concrete, masonry, electrical, plumbing and welding. Performs difficult and critical phases/tasks involved in the repair and construction of buildings, utility systems and other facilities. Responsible for material specification/estimation and material/labor cost estimation. Supervises and trains other individuals performing work that involves a specific trade. Required to work on special park-based projects, assist with special events and working natural disasters throughout the state. Assists in facility management of all Region 2 sites. Assists in performing facility inspections and safety audits. Works under minimal supervision with considerable latitude for the use of initiative and independent judgment. Performs additional duties as assigned. Complies with all Agency, Division and Branch rules, regulations and procedures. Qualifications: MINIMUM QUALIFICATIONS: Education: Graduation from High School or GED. Experience: Four years experience in building and equipment maintenance such as carpentry, roofing, masonry, painting, electrical, plumbing and welding. Licensure: Must possess a valid class "A" Texas Commercial driver's license OR must possess or be able to obtain, within 30 days of employment, a valid class "C" Texas driver's license and convert to a class "A" Commercial driver's license within 12 months of employment; Required to pass the air brake component of a class "A" Commercial driver's license standard examination. NOTE: Retention of position is contingent upon obtaining and maintaining required licenses and compliance with State and Federal regulations including the Department of Transportation (DOT) required drug and alcohol testing. PREFERRED QUALIFICATIONS: Education: Training related to designated building trades(s) and/or areas of expertise; Graduation from a standard senior high school or equivalent, supplemented by vocational training in a designated trade. Experience: Experience in construction, maintenance, and repair work. Licensure: Certification associated with designated building trade(s) training; A current valid class "A" Commercial Texas driver's license. KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of conventional and historic building techniques, materials, equipment, and tools; Knowledge of advanced plumbing, carpentry, electrical, masonry, mechanical maintenance, and repair tasks; Knowledge of OSHA and state safety regulations; Knowledge of State purchasing procedures and regulations; Knowledge of basic mathematics; Skill in using MS Word, Excel, and Outlook; Skill in equipment and electronic maintenance; Skill in selecting appropriate tools and equipment and in troubleshooting situations to determine appropriate actions to resolve problems; Skill in effective verbal and written communication; Skill in using the tools, equipment and materials associated with designated building trades; Skill in the use of hand and power tools, mowers, trimmers, chain saws, tractors, vehicles, generators, and other mechanical equipment; Skill in planning, assigning and/or supervising the work of others; Skill in providing quality customer service in a courteous and professional manner; Skill in establishing and maintaining effective work relationships with co-workers and work-related contacts; Skill in making independent, sound, and timely decisions; Skill in participating as team member, cooperating with both co-workers and management to effectively accomplish regional goals; Skill in project management of multi-discipline programming; Skill in training others; Ability to read and interpret construction plans and specifications; Ability to organize preventive maintenance programs; Ability to apply proper methods, techniques and procedures in the maintenance and repair of buildings, vehicles, and equipment; Ability to interpret drawings, diagrams, and blueprints; Ability to communicate effectively; Ability to perform maintenance and repairs, to diagnose malfunctioning units, to maintain records; Ability to estimate construction labor and material costs; Ability to perform materials take-offs/estimates and to prepare lists for purchase; Ability to provide direction and guidance to others; Ability to work independently with little or no supervision; Ability to work as a member of a team; Ability to purchase supplies, materials, services, and equipment per departmental and state regulations; Ability to maintain flexibility and work with frequent interruptions and multiple changing priorities; Ability to perform manual labor including, lifting supplies and materials up to 50 lbs.; Ability conduct work activities in accordance with TPWD safety program. WORKING CONDITIONS: Required to work 40 hours per week with hours other than 8:00 a.m. to 5:00 p.m. and days off other than Saturdays, Sundays and holidays; Required to perform work outdoors, occasionally in adverse weather conditions; Must be willing to reside in shared housing with other crewmembers; Required to work overtime as necessary; Required to travel 80% with possible overnight stays; Required to use appropriate safety procedures and equipment; Required to perform manual labor including, lifting supplies and materials up to 50 lbs.; Required to operate a State vehicle; Required to pass drug screening prior to employment; Required to pass a previous employment drug testing history verification for all CDL positions held within the past two years; Subject to random, post incident and reasonable cause testing for the duration of employment; Must conform to TPWD dress and grooming standards, work rules and safety procedures; Non-smoking environment in State vehicles and buildings. TPWD IS AN EQUAL OPPORTUNITY EMPLOYER Closing Date: Apr 2, 2024, 11:59:00 PM
CITY OF ESCONDIDO, CA
City of Escondido, California, United States
Summary Maintenance Technician I: $3,830 - $4,655 per month Maintenance Technician II: $4,227 - $5,138 per month Testing dates: Written/Practical Exam: Tentatively scheduled for Tuesday, April 30, 2024 Oral Interview: Tentatively scheduled for Thursday, May 16, 2024 If you want to join a hardworking team that shares a commitment to provide top-quality municipal services in a prime North County location , consider a career with the City of Escondido. We have an opening for the position of Maintenance Technician in our Public Works Department, Parks and Streets Divisions. For a complete listing of job duties and qualifications, please refer to the corresponding job description, which can be obtained from the Human Resources Department or downloaded from the City's website. Under general supervision, performs a variety of manual or semi-skilled duties related to construction, maintenance and repair of City facilities including streets, traffic signal control devices, City lakes and open spaces, building maintenance, and parks landscape installation and maintenance; operates light power equipment; performs related work as required. CLASS CHARACTERISTICS These classifications are progressively staffed with the Maintenance Trainee as the entry level position. Maintenance Technician I incumbents are eligible to progress to the II level after 12 months of successful performance and upon completion of the department training plan. As employees progress into the higher level classification, they are expected to work more independently and at a higher level. Key Responsibilities The following duties are typical for this classification. Incumbents may not perform all of the listed duties and/or may be required to perform additional or different duties from those set forth below to address business needs and changing business practices. General Functions: Performs a wide variety of skilled and semi-skilled construction, landscape, and maintenance work, including low voltage electrical, painting, street patching, and curb repair. Operates hand and portable power tools. Operates motor-driven equipment and trucks on streets, highways and over terrain. Participates and may lead a crew in assigned work projects. Uses chemicals and/or other supplies. Maintains simple records. Retrieves abandoned shopping carts. Performs litter prevention and debris removal. Uses computer for work reporting and information access. Cleans, maintains and stores equipment. Reads and interprets directions and sketches. Performs vacation and temporary relief as necessary. Performs related work as required. Parks Maintenance Functions: Prepares soil for planting and transplanting. Plants, waters, cultivates, fertilizes, rakes, and cares for lawns and ground with hand tools and light power equipment. Sprays for pest and weed control using non-restricted chemicals and products. Trims shrubs and hedges. Mows lawns, fields or street medians. Cleans and maintains rest rooms and park structures. Assists in installation and repair of irrigation systems, fencing and lighting. Sets up safety devices for trimming crew and may act as flag person. Operates a variety of vehicles and equipment such as water trucks, riding lawn mowers, tanker trucks and large trailers. Installs and repairs lawn sprinkler system, ball field fencing and pool facilities. Lines out ball fields. Operates a chipper, chain saw or tractor mower. Checks chlorine and pH levels and performs minor maintenance of pools. Tree Worker Functions: Climbs trees using climbing equipment or works from bucket of an aerial lift truck boom to perform tree maintenance tasks, pruning, limb removal, or line clearing. Establishes safe work zones and adheres to safe work practices including the use of personal protective equipment. Directs the work of the immediate support crew in a safe and effective manner. Operates all types of tree maintenance equipment such as aerial lift trucks, chainsaws, brush chippers, sprayers, stump grinders, or other tools and equipment. Keeps records of work performed, including damage to property. Assists in the training and supervision of lower level staff. Maintains tree maintenance equipment. Responds to inquiries from the general public regarding tree maintenance work and explains City tree policies. Street Maintenance Functions: Patches streets and assists in paving streets and alleys. Constructs and repairs curbs and gutters by excavating with pneumatic and hand tools, building forms, mixing, placing and finishing concrete. Places traffic control and warning signs and monitors traffic flow. Fabricates and installs street and traffic control signs. Paints street lines, crosswalks, and curbs using spray tank, street striper and brush. Places preformed plastic pavement markings and applies raised pavement markers. Cleans, maintains and stores painting equipment. Cleans storm drains, drainage ditches and culverts. Operates street sweeper. Performs tree trimming duties. QUALIFICATIONS Knowledge of: Operational characteristics of electrical systems and internal components. Principles, practices, techniques, tools, and materials used in the installation, maintenance, and repair of electrical or electronic systems and equipment. Principles of electrical theory as applied to electrical circuits and wiring systems. Operating characteristics and application of electrical test equipment. Methods and techniques of troubleshooting and calibrating electric and electronic systems and components. Preventive and corrective maintenance techniques. Use and maintenance of a variety of power and hand tools. Precautions necessary for working with electricity. Blueprint and symbol identification. Basic principles of mathematics. Office procedures, methods, and equipment including computers. Principles and procedures of record keeping. Occupational hazards and standard safety practices. Pertinent federal, state and local codes, laws and regulations including Electrical Safety Orders of the Division of Industrial Safety, California Electrical Code, the National Electric Code, and Cal/OSHA safety rules, regulations, and other safe work practices Ability to: Perform a variety of installation, repair, and maintenance duties on electrical equipment and systems. Inspect, troubleshoot, diagnose, and repair electrical and electronic malfunctions. Operate a variety of electrical testing, maintenance, repair, and installation equipment in a safe and effective manner. Use electrical test equipment. Operate hand and power tools competently and safely. Operate and maintain a computerized traffic control system and keep accurate and detailed records. Handle a variety of tasks with minimum supervision. Maintain required work logs, records, and related operational and maintenance data. Prepare clear and concise written reports. Perform accurate mathematical calculations. Read, interpret, and work from blueprints, electrical diagrams and schematics, manufacturer instructions, and directions. Perform assigned work in accordance with appropriate safety practices and regulations. Operate office equipment including computers. Demonstrate an awareness and appreciation of the cultural diversity of the community. Communicate clearly and concisely, both orally and in writing. Establish and maintain effective working relationships with those contacted in the course of work. Minimum Requirements Maintenance Technician I/II Education/Training: Graduation from the 12th grade or equivalent. Maintenance Technician I Experience: Equivalent to 12 months (full-time equivalent) experience performing general maintenance, including at least six months (full-time equivalent) manual labor experience involving the use of hand tools and portable power tools. Maintenance Technician II Experience: Upon successful completion of the training plan established by the department and at least 12 months (full-time equivalent) with the City of Escondido at the Maintenance Technician I level, incumbents are eligible to progress to Maintenance Technician II. License, Certificate or Other Requirements: Incumbents must possess a valid Class “C” California driver’s license at the time of application. Incumbents assigned to Streets or Parks Maintenance must obtain a Class A commercial driver’s license within six months of hire into the position. A Commercial driver’s license with a tank endorsement may be required of some positions. Incumbents must be willing to work mandatory overtime when required; may be required to work nights, weekends and holidays as required in emergency situations. Tree Worker Function (in addition to above): Certified Tree Worker Certificate (ISA) and Certified Line Clearance certificate are highly desirable. Special Requirements : Safety regulations prohibit incumbents from wearing contact lenses when working with certain chemicals. Incumbents in positions requiring use of a respirator are prohibited from wearing beards or other facial hair which prevents a proper respirator fit. In addition to the above, essential functions of all positions require the following physical, environmental and communication demands. Specific position requirements may vary. Supplemental Information NOTE: For a complete listing of job duties and qualifications, please refer to the corresponding job description, which can be obtained from the Human Resources Department or downloaded from the City's web site. The City of Escondido is committed to a drug and alcohol free workplace. All applicants will be subject to fingerprint investigation before a conditional offer of employment is extended. A pre-employment medical examination will be conducted following a conditional offer of employment for all positions. Safety sensitive positions will include a pre-employment drug screen. Positions subject to the Department of Transportation (DOT) regulations will be subject to DOT pre-employment drug testing and random drug and alcohol testing. SELECTION PROCEDURE Applications will be screened and the most qualified candidates will be invited to appear for testing. All positions require the ability to read, write and speak English. Types of tests may include written and/or oral examination, physical agility, practical exam or other appropriate job-related selection process. When testing is completed, candidates will be ranked on an eligibility list in the order of their test score. Selection for appointments is made from names certified on the eligibility list. All appointments are subject to the successful completion of background investigation including LIVESCAN fingerprinting, and will be required to submit verification of the legal right to work in the United States. Qualification by a medical examination will be required at the time of appointment. After appointment, classified employees must satisfactorily complete a probationary period to be eligible for regular status. In accordance with the Immigration Reform and Control Act of 1986, all new employees must produce proof of eligibility to work in the United States within the first three days of their employment. The City of Escondido participates in E-Verify®. The Loyalty Oath will be administered to all new employees on their first day of hire. New employees hired into positions that require a driver's license must provide proof of a valid California Driver's License of the appropriate class level on their first day of employment. Additional information regarding the essential functions and physical, environmental and communication demands of the position may be obtained from the Human Resources Department. If you require reasonable accommodation in the testing process, such as an alternate means of testing, you must contact the Human Resources Department by the final filing date to complete a Request for Reasonable Accommodation form. The provisions of this bulletin do not constitute an express or implied contract. Any provision contained in this bulletin may be modified or revoked without notice. Note: Pursuant to California Civil Code section 1786.53, the City of Escondido shall provide to all job candidates a copy of any records of arrest, indictment, conviction, civil judicial action, tax lien or outstanding judgment which was obtained in the course of conducting an evaluation for employment, assignment, and/or promotion. A copy of this information, if received by the City, will be given to candidates within seven days of the City's receipt. VETERANS' PREFERENCE Eligible individuals are those who meet the following criteria: Served in the U.S. armed forces Received an honorable discharge Did not retire from military service Seeking employment with the City of Escondido for the first time. Guard and Reserve active duty for training purposes does not qualify for veterans' preference. Proof of eligibility (copy of DD-214) must be submitted at time of application, or later if the promulgation of the eligibility list will not be delayed. Veterans' preference credit will only be applied to eligible applicants who attained a passing grade (total score exclusive of credit) on the final open examination. ABOUT OUR CITY The City of Escondido is a prominent agricultural, commercial hub and residential center of North San Diego County. Located a short 30-minute drive from the beach, the mountains or downtown San Diego, Escondido residents enjoy the pleasure of a rural lifestyle with all the benefits of suburban living. Escondido is a diverse, vibrant community with many amenities. The city offers attractive homes in a wide range of prices, two lakes, several parks, a sports center, golf courses, restaurants, wineries, shopping centers, a variety of art galleries, entertainment venues, and a state of the art hospital. Established in 1888, the city's rich past brings charm and stability to the community; yet integrated with Escondido's treasured heritage is a progressive future, bright and brimming with promise. EOE The City of Escondido does not discriminate on the basis of race, color, religion, disability, sex, age, national origin, or sexual orientation. We will attempt to reasonably accommodate applicants with disabilities upon request. The City of Escondido offers a comprehensive benefit package including vacation, holiday, and sick leave as well as medical, dental, vision, and life insurance. The Benefits of Choice program offers you a range of benefits. You choose the coverage that is right for you, your family and your budget. Read this e-Guide for an overview of your options, with links to additional details and forms. For a more detailed overview of this benefits package, please visit the Maintenance & Operations Benefit Summary. Closing Date/Time: 4/8/2024 5:00 PM Pacific
Mar 26, 2024
Full Time
Summary Maintenance Technician I: $3,830 - $4,655 per month Maintenance Technician II: $4,227 - $5,138 per month Testing dates: Written/Practical Exam: Tentatively scheduled for Tuesday, April 30, 2024 Oral Interview: Tentatively scheduled for Thursday, May 16, 2024 If you want to join a hardworking team that shares a commitment to provide top-quality municipal services in a prime North County location , consider a career with the City of Escondido. We have an opening for the position of Maintenance Technician in our Public Works Department, Parks and Streets Divisions. For a complete listing of job duties and qualifications, please refer to the corresponding job description, which can be obtained from the Human Resources Department or downloaded from the City's website. Under general supervision, performs a variety of manual or semi-skilled duties related to construction, maintenance and repair of City facilities including streets, traffic signal control devices, City lakes and open spaces, building maintenance, and parks landscape installation and maintenance; operates light power equipment; performs related work as required. CLASS CHARACTERISTICS These classifications are progressively staffed with the Maintenance Trainee as the entry level position. Maintenance Technician I incumbents are eligible to progress to the II level after 12 months of successful performance and upon completion of the department training plan. As employees progress into the higher level classification, they are expected to work more independently and at a higher level. Key Responsibilities The following duties are typical for this classification. Incumbents may not perform all of the listed duties and/or may be required to perform additional or different duties from those set forth below to address business needs and changing business practices. General Functions: Performs a wide variety of skilled and semi-skilled construction, landscape, and maintenance work, including low voltage electrical, painting, street patching, and curb repair. Operates hand and portable power tools. Operates motor-driven equipment and trucks on streets, highways and over terrain. Participates and may lead a crew in assigned work projects. Uses chemicals and/or other supplies. Maintains simple records. Retrieves abandoned shopping carts. Performs litter prevention and debris removal. Uses computer for work reporting and information access. Cleans, maintains and stores equipment. Reads and interprets directions and sketches. Performs vacation and temporary relief as necessary. Performs related work as required. Parks Maintenance Functions: Prepares soil for planting and transplanting. Plants, waters, cultivates, fertilizes, rakes, and cares for lawns and ground with hand tools and light power equipment. Sprays for pest and weed control using non-restricted chemicals and products. Trims shrubs and hedges. Mows lawns, fields or street medians. Cleans and maintains rest rooms and park structures. Assists in installation and repair of irrigation systems, fencing and lighting. Sets up safety devices for trimming crew and may act as flag person. Operates a variety of vehicles and equipment such as water trucks, riding lawn mowers, tanker trucks and large trailers. Installs and repairs lawn sprinkler system, ball field fencing and pool facilities. Lines out ball fields. Operates a chipper, chain saw or tractor mower. Checks chlorine and pH levels and performs minor maintenance of pools. Tree Worker Functions: Climbs trees using climbing equipment or works from bucket of an aerial lift truck boom to perform tree maintenance tasks, pruning, limb removal, or line clearing. Establishes safe work zones and adheres to safe work practices including the use of personal protective equipment. Directs the work of the immediate support crew in a safe and effective manner. Operates all types of tree maintenance equipment such as aerial lift trucks, chainsaws, brush chippers, sprayers, stump grinders, or other tools and equipment. Keeps records of work performed, including damage to property. Assists in the training and supervision of lower level staff. Maintains tree maintenance equipment. Responds to inquiries from the general public regarding tree maintenance work and explains City tree policies. Street Maintenance Functions: Patches streets and assists in paving streets and alleys. Constructs and repairs curbs and gutters by excavating with pneumatic and hand tools, building forms, mixing, placing and finishing concrete. Places traffic control and warning signs and monitors traffic flow. Fabricates and installs street and traffic control signs. Paints street lines, crosswalks, and curbs using spray tank, street striper and brush. Places preformed plastic pavement markings and applies raised pavement markers. Cleans, maintains and stores painting equipment. Cleans storm drains, drainage ditches and culverts. Operates street sweeper. Performs tree trimming duties. QUALIFICATIONS Knowledge of: Operational characteristics of electrical systems and internal components. Principles, practices, techniques, tools, and materials used in the installation, maintenance, and repair of electrical or electronic systems and equipment. Principles of electrical theory as applied to electrical circuits and wiring systems. Operating characteristics and application of electrical test equipment. Methods and techniques of troubleshooting and calibrating electric and electronic systems and components. Preventive and corrective maintenance techniques. Use and maintenance of a variety of power and hand tools. Precautions necessary for working with electricity. Blueprint and symbol identification. Basic principles of mathematics. Office procedures, methods, and equipment including computers. Principles and procedures of record keeping. Occupational hazards and standard safety practices. Pertinent federal, state and local codes, laws and regulations including Electrical Safety Orders of the Division of Industrial Safety, California Electrical Code, the National Electric Code, and Cal/OSHA safety rules, regulations, and other safe work practices Ability to: Perform a variety of installation, repair, and maintenance duties on electrical equipment and systems. Inspect, troubleshoot, diagnose, and repair electrical and electronic malfunctions. Operate a variety of electrical testing, maintenance, repair, and installation equipment in a safe and effective manner. Use electrical test equipment. Operate hand and power tools competently and safely. Operate and maintain a computerized traffic control system and keep accurate and detailed records. Handle a variety of tasks with minimum supervision. Maintain required work logs, records, and related operational and maintenance data. Prepare clear and concise written reports. Perform accurate mathematical calculations. Read, interpret, and work from blueprints, electrical diagrams and schematics, manufacturer instructions, and directions. Perform assigned work in accordance with appropriate safety practices and regulations. Operate office equipment including computers. Demonstrate an awareness and appreciation of the cultural diversity of the community. Communicate clearly and concisely, both orally and in writing. Establish and maintain effective working relationships with those contacted in the course of work. Minimum Requirements Maintenance Technician I/II Education/Training: Graduation from the 12th grade or equivalent. Maintenance Technician I Experience: Equivalent to 12 months (full-time equivalent) experience performing general maintenance, including at least six months (full-time equivalent) manual labor experience involving the use of hand tools and portable power tools. Maintenance Technician II Experience: Upon successful completion of the training plan established by the department and at least 12 months (full-time equivalent) with the City of Escondido at the Maintenance Technician I level, incumbents are eligible to progress to Maintenance Technician II. License, Certificate or Other Requirements: Incumbents must possess a valid Class “C” California driver’s license at the time of application. Incumbents assigned to Streets or Parks Maintenance must obtain a Class A commercial driver’s license within six months of hire into the position. A Commercial driver’s license with a tank endorsement may be required of some positions. Incumbents must be willing to work mandatory overtime when required; may be required to work nights, weekends and holidays as required in emergency situations. Tree Worker Function (in addition to above): Certified Tree Worker Certificate (ISA) and Certified Line Clearance certificate are highly desirable. Special Requirements : Safety regulations prohibit incumbents from wearing contact lenses when working with certain chemicals. Incumbents in positions requiring use of a respirator are prohibited from wearing beards or other facial hair which prevents a proper respirator fit. In addition to the above, essential functions of all positions require the following physical, environmental and communication demands. Specific position requirements may vary. Supplemental Information NOTE: For a complete listing of job duties and qualifications, please refer to the corresponding job description, which can be obtained from the Human Resources Department or downloaded from the City's web site. The City of Escondido is committed to a drug and alcohol free workplace. All applicants will be subject to fingerprint investigation before a conditional offer of employment is extended. A pre-employment medical examination will be conducted following a conditional offer of employment for all positions. Safety sensitive positions will include a pre-employment drug screen. Positions subject to the Department of Transportation (DOT) regulations will be subject to DOT pre-employment drug testing and random drug and alcohol testing. SELECTION PROCEDURE Applications will be screened and the most qualified candidates will be invited to appear for testing. All positions require the ability to read, write and speak English. Types of tests may include written and/or oral examination, physical agility, practical exam or other appropriate job-related selection process. When testing is completed, candidates will be ranked on an eligibility list in the order of their test score. Selection for appointments is made from names certified on the eligibility list. All appointments are subject to the successful completion of background investigation including LIVESCAN fingerprinting, and will be required to submit verification of the legal right to work in the United States. Qualification by a medical examination will be required at the time of appointment. After appointment, classified employees must satisfactorily complete a probationary period to be eligible for regular status. In accordance with the Immigration Reform and Control Act of 1986, all new employees must produce proof of eligibility to work in the United States within the first three days of their employment. The City of Escondido participates in E-Verify®. The Loyalty Oath will be administered to all new employees on their first day of hire. New employees hired into positions that require a driver's license must provide proof of a valid California Driver's License of the appropriate class level on their first day of employment. Additional information regarding the essential functions and physical, environmental and communication demands of the position may be obtained from the Human Resources Department. If you require reasonable accommodation in the testing process, such as an alternate means of testing, you must contact the Human Resources Department by the final filing date to complete a Request for Reasonable Accommodation form. The provisions of this bulletin do not constitute an express or implied contract. Any provision contained in this bulletin may be modified or revoked without notice. Note: Pursuant to California Civil Code section 1786.53, the City of Escondido shall provide to all job candidates a copy of any records of arrest, indictment, conviction, civil judicial action, tax lien or outstanding judgment which was obtained in the course of conducting an evaluation for employment, assignment, and/or promotion. A copy of this information, if received by the City, will be given to candidates within seven days of the City's receipt. VETERANS' PREFERENCE Eligible individuals are those who meet the following criteria: Served in the U.S. armed forces Received an honorable discharge Did not retire from military service Seeking employment with the City of Escondido for the first time. Guard and Reserve active duty for training purposes does not qualify for veterans' preference. Proof of eligibility (copy of DD-214) must be submitted at time of application, or later if the promulgation of the eligibility list will not be delayed. Veterans' preference credit will only be applied to eligible applicants who attained a passing grade (total score exclusive of credit) on the final open examination. ABOUT OUR CITY The City of Escondido is a prominent agricultural, commercial hub and residential center of North San Diego County. Located a short 30-minute drive from the beach, the mountains or downtown San Diego, Escondido residents enjoy the pleasure of a rural lifestyle with all the benefits of suburban living. Escondido is a diverse, vibrant community with many amenities. The city offers attractive homes in a wide range of prices, two lakes, several parks, a sports center, golf courses, restaurants, wineries, shopping centers, a variety of art galleries, entertainment venues, and a state of the art hospital. Established in 1888, the city's rich past brings charm and stability to the community; yet integrated with Escondido's treasured heritage is a progressive future, bright and brimming with promise. EOE The City of Escondido does not discriminate on the basis of race, color, religion, disability, sex, age, national origin, or sexual orientation. We will attempt to reasonably accommodate applicants with disabilities upon request. The City of Escondido offers a comprehensive benefit package including vacation, holiday, and sick leave as well as medical, dental, vision, and life insurance. The Benefits of Choice program offers you a range of benefits. You choose the coverage that is right for you, your family and your budget. Read this e-Guide for an overview of your options, with links to additional details and forms. For a more detailed overview of this benefits package, please visit the Maintenance & Operations Benefit Summary. Closing Date/Time: 4/8/2024 5:00 PM Pacific
If you are a current City of Olathe employee, please click this link to apply through your Workday account. Employment Type Full Time Job Summary Plant Maintenance Technician Pay Range: $21.75 to $30.00, depending on qualifications The City of Olathe is seeking a Plant Maintenance Technician to join our Environmental Services Plant Maintenance team. Plant Maintenance Technicians play a key role in supporting the City’s Water Plant, Wastewater Plants, and Environmental Lab by maintaining essential infrastructure, ensuring operational efficiency, and upholding quality and safety standards. We invite you to bring your talent and skills and become a valued addition to a workforce that is our greatest asset. Working for the City of Olathe is more than a job. You will be trained, supported, and valued. You’ll make a difference in the community, work alongside experienced people, receive leadership support, and work in a stable and positive work environment. The City of Olathe strives to be an inclusive place to work. We set the standard for success in Public Service! Our employees are dedicated to the City’s core values of Leadership through Service, Teamwork, Customer Service, Learning and Communication. The City of Olathe's Infrastructure Department where this position resides is nationally accredited by the American Public Works Association. Work Schedule: 7:00 AM to 3:30 PM M-F. May become eligible for 4-10 hour shifts per week following introductory period. Will participate in on-call rotation Must successfully pass pre-employment screenings which include: Criminal Background Check Review of Driving Record Physical Drug Screen Additional information: Please include your work history or attach a resume in PDF or .doc format. Job will be posted until filled. For more details, review the full job details and requirements below. Perform preventive, corrective, and some predictive maintenance on pumps, mixers, motors, blowers, valves, actuators, water lines, HVAC, instrumentation, and other related equipment including the ability to maintain various types of electrical (24V, 120V, 240V, 480V) and mechanical equipment. Perform troubleshooting and repair/replacement work on electrical and mechanical equipment and participate in housekeeping duties and building maintenance. Operate a variety of equipment including trucks, hand tools, power tools, pumps, valves, actuators, electronic test meters, and various other vehicles and equipment. Document work completed in the City’s computerized maintenance management system (Cartegraph) and provide support to more skilled workers involved in the adjustment, maintenance, part replacement, and repair of tools and equipment. Model positive safety behaviors to aid i n the development of the safety culture for the department. Perform duties following all safety protocols according to City policies. Perform on-call duties and overtime as required. Experience and Education Guidelines Any combination of experience and education that would likely provide the required knowledge, skills and abilities is acceptable. A typical way to obtain the knowledge, skills and abilities would be: Experience: At least one year or equivalent experience in a related field such as HVAC technician, plumber, electrician, or mechanical maintenance. Education : High school diploma supplemented by specialized courses. License or Certificate: Possess or have the ability to meet the requirement to obtain a Class I Plant Maintenance Technologist certification within 24 months of start date and possess a valid driver’s license with favorable driving record. SUPERVISED BY : Plant Maintenance Superintendent or Team Supervisor. SUPERVISES : None.
Mar 07, 2024
Full Time
If you are a current City of Olathe employee, please click this link to apply through your Workday account. Employment Type Full Time Job Summary Plant Maintenance Technician Pay Range: $21.75 to $30.00, depending on qualifications The City of Olathe is seeking a Plant Maintenance Technician to join our Environmental Services Plant Maintenance team. Plant Maintenance Technicians play a key role in supporting the City’s Water Plant, Wastewater Plants, and Environmental Lab by maintaining essential infrastructure, ensuring operational efficiency, and upholding quality and safety standards. We invite you to bring your talent and skills and become a valued addition to a workforce that is our greatest asset. Working for the City of Olathe is more than a job. You will be trained, supported, and valued. You’ll make a difference in the community, work alongside experienced people, receive leadership support, and work in a stable and positive work environment. The City of Olathe strives to be an inclusive place to work. We set the standard for success in Public Service! Our employees are dedicated to the City’s core values of Leadership through Service, Teamwork, Customer Service, Learning and Communication. The City of Olathe's Infrastructure Department where this position resides is nationally accredited by the American Public Works Association. Work Schedule: 7:00 AM to 3:30 PM M-F. May become eligible for 4-10 hour shifts per week following introductory period. Will participate in on-call rotation Must successfully pass pre-employment screenings which include: Criminal Background Check Review of Driving Record Physical Drug Screen Additional information: Please include your work history or attach a resume in PDF or .doc format. Job will be posted until filled. For more details, review the full job details and requirements below. Perform preventive, corrective, and some predictive maintenance on pumps, mixers, motors, blowers, valves, actuators, water lines, HVAC, instrumentation, and other related equipment including the ability to maintain various types of electrical (24V, 120V, 240V, 480V) and mechanical equipment. Perform troubleshooting and repair/replacement work on electrical and mechanical equipment and participate in housekeeping duties and building maintenance. Operate a variety of equipment including trucks, hand tools, power tools, pumps, valves, actuators, electronic test meters, and various other vehicles and equipment. Document work completed in the City’s computerized maintenance management system (Cartegraph) and provide support to more skilled workers involved in the adjustment, maintenance, part replacement, and repair of tools and equipment. Model positive safety behaviors to aid i n the development of the safety culture for the department. Perform duties following all safety protocols according to City policies. Perform on-call duties and overtime as required. Experience and Education Guidelines Any combination of experience and education that would likely provide the required knowledge, skills and abilities is acceptable. A typical way to obtain the knowledge, skills and abilities would be: Experience: At least one year or equivalent experience in a related field such as HVAC technician, plumber, electrician, or mechanical maintenance. Education : High school diploma supplemented by specialized courses. License or Certificate: Possess or have the ability to meet the requirement to obtain a Class I Plant Maintenance Technologist certification within 24 months of start date and possess a valid driver’s license with favorable driving record. SUPERVISED BY : Plant Maintenance Superintendent or Team Supervisor. SUPERVISES : None.
Description Under general supervision, the purpose of the position is to perform installation, repair and maintenance work in the construction and maintenance of the City’s wastewater treatment, collection, and reuse facilities. Employees in this classification function at the entry level, and are accountable for ensuring the efficient and effective operation of wastewater facilities and equipment and gain abilities and skill primarily through on-the-job training. Employee works and confers with the Utility Maintenance Supervisor or higher level Technician on unusual or highly complex operational repairs or construction projects. Duties Other duties may be assigned. Assists work crews in installation, repair and maintenance of distribution and/or collection lines to include the operation of various pieces of mechanical equipment. Performs inspection of facilities and equipment to identify and repair existing or potential problems; informs supervisor and Chief Wastewater System Operator of breakdown or obstruction. Performs preventive maintenance as directed by the Utilities Maintenance Supervisor. Performs routine repairs, replacement tasks and construction projects to wastewater treatment, collection, and reuse facilities and equipment. Performs trades work, e.g., masonry, carpentry, electrical, welding; threads, cuts, fits and replaces pipes and plumbing infrastructure. Performs various custodial and maintenance duties in and around wastewater facilities, e.g., litter collecting, mowing, tree trimming, fertilizing, placing sod, raking, planting and painting. Operates a variety of hand and power tools for both electrical and mechanical repairs, e.g., air wrenches, air hammer, chisel, shovel, rodder. Assists in the development and integration of Utility Division policies and procedures for operational enhancement. Cleans, inspects and maintains lift stations and wastewater facilities and equipment, e.g., removes grease; lubricates motors and equipment, replaces packing in pumps and valves, replaces wiring and bearings in motors and pumps. Develops lists of materials required, identifies suppliers, orders and receives materials under the direction of the supervisor. Employee is subject to 24-hour on-call emergency availability and complies with Departmental on-call policies and procedures. Assists with emergency preparedness and evacuation activities as directed. Required Education, Experience, License, Registration, and Certification Qualifications High school diploma or GED; Vocational training/certification with major coursework in electrical, mechanical and/or pluming; supplemented by one (1) year responsible experience in the skilled labor of Utilities maintenance and repair; or an equivalent combination of education, training, and experience. Must possess a valid Class “B” Florida Commercial Driver's License or the ability to acquire the license within six (6) months from the date of hire. MUST possess a Class “C” Wastewater Collections System Certificate issued by the Florida Water and Pollution Control Operators Association or a wastewater collections system certificate issued by California State University, Sacramento within eighteen months of appointment. Supplemental or Additional Information To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Knowledge of maintenance and repair techniques for assigned facilities, vehicles and equipment. Knowledge and practice of occupational safety rules and practices. Ability to perform strenuous work in all weather conditions. Ability to perform electrical, welding and other repair and maintenance of assigned facilities and equipment. Ability to work effectively with other employees and the public. Skill in the use of power and manual tools and equipment required for repairs, maintenance and testing. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Ability to work in confined spaces. Benefits for full-time employeesinclude: Health insurance and subsidy for family and spouse coverage Dental insurance Life Insurance Accidental Death & Dismembermentinsurance Retirement plan 457 Deferred compensation plan Retirement Health Savings Plan Roth IRA Vacation, medical and personal leave Blood donation leave program 10paid holidays Beach parking sticker at resident rate Reimbursementof co-pays for annual physical and cancer screenings Paid Family Membership to SanibelRecreation Center Unlimited Sanibel Causeway transponder Cape Coral bridges transponder, if applicable
Mar 08, 2024
Full Time
Description Under general supervision, the purpose of the position is to perform installation, repair and maintenance work in the construction and maintenance of the City’s wastewater treatment, collection, and reuse facilities. Employees in this classification function at the entry level, and are accountable for ensuring the efficient and effective operation of wastewater facilities and equipment and gain abilities and skill primarily through on-the-job training. Employee works and confers with the Utility Maintenance Supervisor or higher level Technician on unusual or highly complex operational repairs or construction projects. Duties Other duties may be assigned. Assists work crews in installation, repair and maintenance of distribution and/or collection lines to include the operation of various pieces of mechanical equipment. Performs inspection of facilities and equipment to identify and repair existing or potential problems; informs supervisor and Chief Wastewater System Operator of breakdown or obstruction. Performs preventive maintenance as directed by the Utilities Maintenance Supervisor. Performs routine repairs, replacement tasks and construction projects to wastewater treatment, collection, and reuse facilities and equipment. Performs trades work, e.g., masonry, carpentry, electrical, welding; threads, cuts, fits and replaces pipes and plumbing infrastructure. Performs various custodial and maintenance duties in and around wastewater facilities, e.g., litter collecting, mowing, tree trimming, fertilizing, placing sod, raking, planting and painting. Operates a variety of hand and power tools for both electrical and mechanical repairs, e.g., air wrenches, air hammer, chisel, shovel, rodder. Assists in the development and integration of Utility Division policies and procedures for operational enhancement. Cleans, inspects and maintains lift stations and wastewater facilities and equipment, e.g., removes grease; lubricates motors and equipment, replaces packing in pumps and valves, replaces wiring and bearings in motors and pumps. Develops lists of materials required, identifies suppliers, orders and receives materials under the direction of the supervisor. Employee is subject to 24-hour on-call emergency availability and complies with Departmental on-call policies and procedures. Assists with emergency preparedness and evacuation activities as directed. Required Education, Experience, License, Registration, and Certification Qualifications High school diploma or GED; Vocational training/certification with major coursework in electrical, mechanical and/or pluming; supplemented by one (1) year responsible experience in the skilled labor of Utilities maintenance and repair; or an equivalent combination of education, training, and experience. Must possess a valid Class “B” Florida Commercial Driver's License or the ability to acquire the license within six (6) months from the date of hire. MUST possess a Class “C” Wastewater Collections System Certificate issued by the Florida Water and Pollution Control Operators Association or a wastewater collections system certificate issued by California State University, Sacramento within eighteen months of appointment. Supplemental or Additional Information To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Knowledge of maintenance and repair techniques for assigned facilities, vehicles and equipment. Knowledge and practice of occupational safety rules and practices. Ability to perform strenuous work in all weather conditions. Ability to perform electrical, welding and other repair and maintenance of assigned facilities and equipment. Ability to work effectively with other employees and the public. Skill in the use of power and manual tools and equipment required for repairs, maintenance and testing. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Ability to work in confined spaces. Benefits for full-time employeesinclude: Health insurance and subsidy for family and spouse coverage Dental insurance Life Insurance Accidental Death & Dismembermentinsurance Retirement plan 457 Deferred compensation plan Retirement Health Savings Plan Roth IRA Vacation, medical and personal leave Blood donation leave program 10paid holidays Beach parking sticker at resident rate Reimbursementof co-pays for annual physical and cancer screenings Paid Family Membership to SanibelRecreation Center Unlimited Sanibel Causeway transponder Cape Coral bridges transponder, if applicable
Jefferson County
Wheat Ridge, Colorado, United States
The Maintenance Technician is responsible for receiving, generating, prioritizing, and closing work requests. Assists in a variety of semi-skilled work in the maintenance and repair of county buildings and assets. Conducts equipment and mechanical inventory evaluations, repairs and/or replaces building parts as necessary for preventative maintenance and proper building functions. Assists higher skilled trades personnel with repairs, troubleshooting, and cleanup. Coordinates and responds to service requests and evaluates and documents maintenance and costs. Exercises discretion in identifying projects requiring the services of higher skilled trades personnel; assists in obtaining quotes and arranging for services and escort of outside vendors and contractors as needed; annotates and updates work logs for specific site requirements. Apply By: 03/31/24 Division: Library Division Management Level: Individual Contributor Scheduled Weekly Hours: 40 Benefit Eligibility: This position is eligible for Standard Benefits which includes dental, medical, and vision insurance, paid time off and holidays, retirement matching, wellness programs, and tuition reimbursement. Description: Hiring Range: $19.06 - $24.07 per hour. Performs a variety of work in the maintenance and repair of county buildings, structures, and grounds in accordance with blueprints, manuals, building codes, and industry standards using common, task specific hand and specialized tools, and equipment. Maintains clean, safe, and orderly sites and service rooms. Performs masonry, painting and heating and cooling systems repairs and troubleshooting. Performs basic electrical installation and repair work in wiring for switches, outlets, plugs, cables, power circuits and appliances; repairs lighting systems; inspects electrical systems and fixtures for unsafe conditions. Performs basic rough and finished carpentry work in construction and repair of structures such as partitions, walls, doors, fences, window frames, office furniture, and selves. Performs basic repairs of plumbing leaks or breaks; opens clogged lines and drains; replaces washers and other minor parts; maintains and monitors septic systems. Moves and removes furniture in buildings. Sets up various spaces and functions for public and staff. Deliver, move, and remove boxes, supplies, books, and materials. May use forklift, pallet jacks, manual lifting, and other equipment. Maintains grounds by conducting projects for grounds and exterior improvement, preventative maintenance, safety, and order. May include partitions, walls, outdoor equipment, furniture, irrigation repair and maintenance, lawn mowing, trimming, weeding, aerating, weed control, seeding, fertilizing, pesticide application and all other outdoor related projects. Replaces furniture, equipment, plants, sets sprinklers, replaces broken sprinkler heads, adjusts automatic time clocks and system pressure, if necessary, maintains grounds maintenance equipment, remove and trims small trees, tree branches and shrubs. Maintains exterior surfaces, curbs, and parking stops by conducting projects for improvement, preventative maintenance, safety, and order. May include sidewalk, pavement, and curbing maintenance and repair to include of concrete, asphalt, painting. Performs various administrative tasks by utilizing technology and software to maintain facility notebooks, records, logs, manuals, equipment, inventory, and organizing and properly documenting budget. Provide inventory and cost analysis. Track and tag inventory. Enter data and generate reports from computer-based spreadsheets, databases, and word processing programs. Record service requests and maintenance information on the computer. Communicates via email, phone, and face to face. Participates in performing snow and ice removal duties when required, including operating snow removal equipment. Responds to building emergency calls and alarms 24/7 when scheduled and as needed. Maintain, clean, and operate county vehicles and equipment, including basic preventive maintenance. Maintain and order parts for equipment and janitorial supplies. Other duties as assigned. Required-- Motor Vehicle Record check at hire. First Aid, CPR and AED certificate may be required within 6 months. Colorado Driver's License - at hire. Motor Vehicle Record check - at hire. JCPL -- Forklift certification within 6 months of hire. JCPL - OSHA 10 certification within 1 year of hire. Education: Experience: Work Experience: Minimum one year Certifications: Languages: Category: Maintenance & Trades
Mar 12, 2024
Full Time
The Maintenance Technician is responsible for receiving, generating, prioritizing, and closing work requests. Assists in a variety of semi-skilled work in the maintenance and repair of county buildings and assets. Conducts equipment and mechanical inventory evaluations, repairs and/or replaces building parts as necessary for preventative maintenance and proper building functions. Assists higher skilled trades personnel with repairs, troubleshooting, and cleanup. Coordinates and responds to service requests and evaluates and documents maintenance and costs. Exercises discretion in identifying projects requiring the services of higher skilled trades personnel; assists in obtaining quotes and arranging for services and escort of outside vendors and contractors as needed; annotates and updates work logs for specific site requirements. Apply By: 03/31/24 Division: Library Division Management Level: Individual Contributor Scheduled Weekly Hours: 40 Benefit Eligibility: This position is eligible for Standard Benefits which includes dental, medical, and vision insurance, paid time off and holidays, retirement matching, wellness programs, and tuition reimbursement. Description: Hiring Range: $19.06 - $24.07 per hour. Performs a variety of work in the maintenance and repair of county buildings, structures, and grounds in accordance with blueprints, manuals, building codes, and industry standards using common, task specific hand and specialized tools, and equipment. Maintains clean, safe, and orderly sites and service rooms. Performs masonry, painting and heating and cooling systems repairs and troubleshooting. Performs basic electrical installation and repair work in wiring for switches, outlets, plugs, cables, power circuits and appliances; repairs lighting systems; inspects electrical systems and fixtures for unsafe conditions. Performs basic rough and finished carpentry work in construction and repair of structures such as partitions, walls, doors, fences, window frames, office furniture, and selves. Performs basic repairs of plumbing leaks or breaks; opens clogged lines and drains; replaces washers and other minor parts; maintains and monitors septic systems. Moves and removes furniture in buildings. Sets up various spaces and functions for public and staff. Deliver, move, and remove boxes, supplies, books, and materials. May use forklift, pallet jacks, manual lifting, and other equipment. Maintains grounds by conducting projects for grounds and exterior improvement, preventative maintenance, safety, and order. May include partitions, walls, outdoor equipment, furniture, irrigation repair and maintenance, lawn mowing, trimming, weeding, aerating, weed control, seeding, fertilizing, pesticide application and all other outdoor related projects. Replaces furniture, equipment, plants, sets sprinklers, replaces broken sprinkler heads, adjusts automatic time clocks and system pressure, if necessary, maintains grounds maintenance equipment, remove and trims small trees, tree branches and shrubs. Maintains exterior surfaces, curbs, and parking stops by conducting projects for improvement, preventative maintenance, safety, and order. May include sidewalk, pavement, and curbing maintenance and repair to include of concrete, asphalt, painting. Performs various administrative tasks by utilizing technology and software to maintain facility notebooks, records, logs, manuals, equipment, inventory, and organizing and properly documenting budget. Provide inventory and cost analysis. Track and tag inventory. Enter data and generate reports from computer-based spreadsheets, databases, and word processing programs. Record service requests and maintenance information on the computer. Communicates via email, phone, and face to face. Participates in performing snow and ice removal duties when required, including operating snow removal equipment. Responds to building emergency calls and alarms 24/7 when scheduled and as needed. Maintain, clean, and operate county vehicles and equipment, including basic preventive maintenance. Maintain and order parts for equipment and janitorial supplies. Other duties as assigned. Required-- Motor Vehicle Record check at hire. First Aid, CPR and AED certificate may be required within 6 months. Colorado Driver's License - at hire. Motor Vehicle Record check - at hire. JCPL -- Forklift certification within 6 months of hire. JCPL - OSHA 10 certification within 1 year of hire. Education: Experience: Work Experience: Minimum one year Certifications: Languages: Category: Maintenance & Trades
City of Portland, Oregon
Portland, Oregon, United States
The Position Are you service-minded with strong facilitation, reporting, analytical and writing skills? Are you seeking to apply your knowledge and expertise toward meaningful work? Would you like to obtain your Limited Maintenance Electrical License and have experience working for the City of Portland? If so , this may be a rewarding opportunity to support the needs of the Bureau of Environmental Services as an Instrument Technician. The City of Portland Bureau of Environmental Services (BES) Operations & Maintenance Group (O&MG) A core aspect of the Bureau of Environmental Services’ work is in operating and maintaining the sewer piping network and treatment system to meet NPDES Permit compliance. Within the Operations and Maintenance Group Wastewater Pumping and Treatment Maintenance Division, this critical work includes installing, maintaining and repairing mechanical, electrical, automation, and instrumentation equipment at two large, complex wastewater treatment plants, 98 pump stations located throughout the City as well as the combined sewer overflow system. Instrument Techs operate at a journeyman level to safely install, maintain, document and repair electrical instrument systems. Cost-effective decisions regarding proper equipment installation, troubleshooting and modifications required are common and are key elements to the success of the technician’s ability to meet project schedules and keep process areas functioning as designed. Instrument Tech duties include performing preventive and predictive maintenance on various types of instrumentation system to maintain reliability and meet permit requirements. To meet facility operational requirements, they install new equipment, respond to issues, troubleshoot and repair a variety of industrial instruments and precision process control systems. In addition, they participate in a call-out duty rotation for after-hours response. The apprentice level of this class typically assists with and learns to perform the full range of Instrument Technician tasks under the instruction of a journey Instrument Technician and as active participant in Apprenticeship Program. The apprenticeship program is a structured 4,000-hour program involving classroom instruction plus on-the-job training and work performance. Training progress is subject to review by a training and apprenticeship committee. Upon successful completion of the prescribed training program and acquiring the required license, apprentices will be eligible for appointment as an Instrument Technician. What you’ll get to do: Work under the direction of a journey-level Instrument Technician and/or Electrician and assisting in performing a variety of skilled instrument and process control work while also obtaining the required training to get the Oregon Limited Maintenance Electrical license. Instrument technician duties include performing preventive and predictive maintenance on various types of industrial instrumentation and automation systems to maintain reliability. To meet facility operational requirements, an Instrument Technician installs new equipment, responds to issues, troubleshoots and repairs a variety of industrial instruments and precision process control systems. Typical tools of the trade used include precision hand tools, power tools, and precision calibration tools. The work completed by this position will be critical for successful operations of the treatment plant. Below are some common tasks of the Instrument Technician, Apprentice: Assists in set up, installation, and calibration of various analytical and communication equipment and instrumentation. Interprets and works from plans and/or develops sketches or designs for work, as appropriate. Participates in performing a variety of programming, diagnostic, analytical, and documentation work involving programmable controllers and graphical-user (human machine) interfaces for a variety of equipment, including but not limited to programmable logic controllers (PLCs), control panels, communications panels, distributed control systems, and pneumatic/hydraulic/instrumentation panels; research information as necessary to perform duties and maintain currency. Works to maintain and repair existing process measurement and control instrumentation equipment and systems and related transmitting equipment and systems to ensure proper operation and service. Assists in performing preventive maintenance, service and repairs Contributes in reconfiguring the programs to accommodate system upgrades and other environmental changes; documents work. Participates in designing, upgrading, installing, connecting and testing new and repaired control and monitoring systems. Collaborates to create supporting documentation, i.e., P&IDs, loop drawings per ISA Standards, Instrument Specification Sheets, etc. Assists in evaluating and assessing the safety, operability, and condition of systems; assists in ensuring that repairs and installations operate properly. Maintains records, supplies and equipment; assists in determining materials needed. Works with others to ensure quality customer service. Responsible for appropriate safety precautions Assists with designing, fabricating (exclusive of welding), installing and/or retrofitting instrument equipment and certain piping and tubing. The Ideal Candidate will have: Exposure to analytical instrumentation Process control experience and calibration Associate degree in instrumentation or equivalent vocational Certificate of Completion and or equivalent. Past experience working with a broad range of individuals and communities with diverse racial, ethnic and socio-economic backgrounds. The position will sit at the Columbia Boulevard Wastewater Treatment Plant located in North Portland but be expected to travel to the Tryon Creek Wastewater Treatment Plant located at Lake Oswego and any of the other 100 pump stations/facilities owned and operated by the O&M Group. About the Bureau of Environmental Services BES is seeking talented individuals from diverse racial, ethnic, and socio-economic backgrounds with knowledge, ability, and experience working with a broad range of individuals and communities; and that desire to work collaboratively and creatively to broaden the variety of innovative ways to partner with and serve all Portland communities. To learn more about the work we do at BES, click on the link: www.portlandoregon.gov/bes/ Our BES 10-Year Strategic Plan can be found here: https://www.portlandoregon.gov/bes/75720 This classification is represented by The District Council of Trade Unions (DCTU). To view this labor agreement, please go to https://www.portland.gov/bhr/employee-relations/labor-relations/labor-agreements and click on the appropriate link. A pplicants start at the entry salary rate. If you are a DCTU represented employee, see labor agreement for additional information or talk to your union representative City of Portland Core Values: Anti-racism | Communication | Collaboration | Equity | Transparency | Fiscal Responsibility These values guide our actions as we serve the community and engage our workforce. To learn more about the City's core values, please click here . Why work at the City of Portland? The City of Portland workforce serves a population of over 650,000. We are culture- and solutions-driven, viewing every challenge as an opportunity to learn, improve, and share our expertise. We are committed to removing systemic barriers to resources, access, and opportunity. The City is a believer in ALL people and continues to actively recruit and retain diverse top talent every day. We offer a comprehensive benefits package , including but not limited to medical, dental, vision, healthcare flexible and/or dependent care spending accounts, Carrot Fertility, basic life, short- and long-term disability coverage to eligible employees and their families. If you are open-minded, motivated, community-focused, and self-aware, please apply yourself at the City of Portland today. Work Location This position will report in person. City Council approved a human resources administrative rule in January 2023, HRAR - 4.045 , requiring employees, including those who are fully remote and hybrid, to perform work within Oregon or Washington. For more information, click here . To Qualify The following minimum qualifications are required for this posting: Ability to understand and follow oral and simple written instructionsExperience establishing and maintaining effective working relationshipsAbility to learn and apply safe work practicesExperience writing legibly and filling out simple forms with training Preferred Qualification(s): Knowledge of basic instrumentation Applicants must also possess: The ability to be a high school graduate or possess a GED Equivalency Certificate at time of hire . Ability to register as a PCC student. https://www.pcc.edu/programs/apprenticeship/se-admin/ A valid state’s driver’s license and acceptable driving record at time of hire . Ability to pass the Physical Capabilities Test after an offer of employment has been made and accepted. Ability to pass pre-employment physical examination after an offer of employment has been made and accepted. The Recruitment Process A qualifying review includes a review of each applicant’s yes/no responses to the minimum qualifications in the Supplemental Questions. Those candidates passing this review will have their work experience, education and certificates/licenses and responses to the minimum qualifications in Supplemental Questions No. 13 and 14 evaluated, weighted 100%. Only those candidates passing the work experience, education, certificates/license and Supplemental Application review for minimum qualifications will be placed on an equally ranked list. You have 14 days from the notice of the examination results to let us know if you disagree with your results. Please read the City of Portland Administrative Rule 3.01 for complete information. Additional evaluation may be required prior to final selection and/or establishment of the eligible list. Recruitment Activity Schedule: Posting Closes: 04/29/24 Applications Reviewed: week of 4/29/24 1st Eligible List: week of 2/26/2024 and every thirty days until filled Selection Phase Begins: TBD *Timeline is approximate and subject to change. Please note, all completed applications for this position must be submitted no later than on the closing date and time of this recruitment. All applications must be submitted via the City's online application process. Do not attach materials not requested. E-mailed and/or faxed applications will not be accepted. Additional Information Applicants MUST FOLLOW the process below and submit the following application materials to be considered for this position. Failure to submit the required application materials will result in elimination from further consideration: A COMPLETED Resume or Work Experience document. This document should contain information about work experience, education, certifications and licenses. Please note, a cover letter is NOT required for this recruitment. A resume or work experience document should be attached. Submit responses to the minimum qualification Supplemental Questions: Read and complete the yes / no minimum qualification Supplemental Questions 3- 12. Provide written responses to the minimum qualification Supplemental Questions 13-14. Failure to respond to this minimum qualification questions (13-14) will result in elimination from further consideration. Work Status: Non-citizen applicants must be authorized to work in the United States at the time of application. Veterans' Preference: If you are requesting Veterans' Preference, attach a copy of your DD214/DD215 and/or Veterans Administration letter stating your disability to your profile, as well as checking the box identifying yourself as a Veteran. You must request Veterans' Preference AND include a copy of your documentation for each recruitment to which you apply. Veterans' Preference documentation must be submitted no later than 11:59 PM on the closing date of this recruitment. ADA, Pregnancy, and Religious Accommodations: If you identify as a person with a disability, are pregnant or nursing, or observe a religious practice(s), and would like to request a reasonable accommodation when applying for this job, please contact the Recruiter below for assistance. Equal Employment Opportunity: It is the policy of the City of Portland that no person shall be discriminated against based on race, religion, color, sex, marital status, family status, national origin, age, mental or physical disability, protected veteran status, sexual orientation, gender identity or source of income. The City values diversity and encourages everyone who is interested in employment with the City to apply. Language Pay Differential: City of Portland employees who speak one or more languages in addition to English, may be eligible to receive a “language pay differential.” This is compensation for qualifying multilingual City employees who use their language skill to assist the community. More about the language pay differential can be found here. Did you know? The City of Portland offers "How to Apply Classes" that are free and review best practices for applying to the City. Follow the link for the most recent list of scheduled dates: https://www.portland.gov/bhr/events . Overview of the Apprentice Program This is a 4000-hour (approximately 2 years) program that provides apprentices with the knowledge and skills required to be a journey Limited Maintenance Electrician, working as a Instrument Technician, through a combination of on-the-job and outside classroom training. In addition to the 4000 hours of on-the-job training, 288 hours of related classroom training is required. The Apprentices' skill development is assessed throughout the program and raises are based on progress in the program. Apprentice will be attending classroom training at Portland Community College Swan Island Trades Center. Each apprentice will be required to enroll as student with PCC and pass any required math testing administered by the college. There is a process in place for reviewing credit for previous education, work experience, and training which may shorten the actual length of your apprenticeship program. They will also be required to submit monthly job reports to verify training is on-track with the program adjectives. Classroom training is held on weekday evenings and some Saturdays. Attendance is required for classroom training. Pay advances for the apprenticeship are determined by the TAC (Training and Apprenticeship Committee) at PCC. All applicants must review the PCC website associated with this job posting. The PCC apprenticeship website is https://www.pcc.edu/programs/apprenticeship/se-admin/ The approximately 4000 hours of On-The-Job Training are in the following areas: Work Process Motors and generators (500 Hours) Assembly and testingRepair and maintenanceInternal and external connections to change direction of rotation and speed, and for a change of supply of voltageMotor settings, drives, pulleys, gears, coupling devicesRelated mechanical equipment: Traction units, cranes, winches, hoistIn place motor cleaning, (100 hours maximum credit) Controls (1000 hours) Manual and automatic, including magnetic and solid state Trouble shooting (1000 hours) Power Distribution (500 hours) Inside and outside, high and low voltage distribution systems, maintenance and replacement Lighting (500 hours) Electrical and oriented drawings (100 hours) The remaining time is necessary to complete the apprenticeship program shall be applied according to the apprentice’s training needs by the apprenticeship committee and the employer The 288 hours of classroom related training is in the following areas: Course Hours Electricity and electronics 36 Fundamental mechanical principles 36 Mathematics of the trade 18 Instrumentation and controls 18 Federal, state and local electrical laws, codes and rules 140 Blueprint reading, electrical drawings and pictorial, block, one-line and schematic diagrams 36 Industrial electrical safety: A certified CPR (Cardiopulmonary Resuscitation) course of the committee’s choice 4 Questions? Terrol Johnson, Senior Recruiter Bureau of Human Resources terrol.johnson@portlandoregon.gov An Equal Opportunity Employer A Career with the City of Portland offers many Employee Benefits We offer a comprehensive benefits package, including but not limited to Health Care (Medical, Vision and Dental) Carrot Fertility Wellness Benefits Life Insurance Short- and Long-term disability coverage to eligible employees and their families. Employee Assistance Plan Flexible Spending Accounts Retirement Oregon Public Employees Retirement System (PERS), including contributions to the PERS IAP plan paid by employer Family Medical Leave City Paid Parental Leave AND SO MANY MORE! Benefits may vary depending on bargaining unit and employment status. Click here to review the many different benefits the City of Portland offers . Closing Date/Time: 4/29/2024 11:59 PM Pacific
Mar 07, 2024
Full Time
The Position Are you service-minded with strong facilitation, reporting, analytical and writing skills? Are you seeking to apply your knowledge and expertise toward meaningful work? Would you like to obtain your Limited Maintenance Electrical License and have experience working for the City of Portland? If so , this may be a rewarding opportunity to support the needs of the Bureau of Environmental Services as an Instrument Technician. The City of Portland Bureau of Environmental Services (BES) Operations & Maintenance Group (O&MG) A core aspect of the Bureau of Environmental Services’ work is in operating and maintaining the sewer piping network and treatment system to meet NPDES Permit compliance. Within the Operations and Maintenance Group Wastewater Pumping and Treatment Maintenance Division, this critical work includes installing, maintaining and repairing mechanical, electrical, automation, and instrumentation equipment at two large, complex wastewater treatment plants, 98 pump stations located throughout the City as well as the combined sewer overflow system. Instrument Techs operate at a journeyman level to safely install, maintain, document and repair electrical instrument systems. Cost-effective decisions regarding proper equipment installation, troubleshooting and modifications required are common and are key elements to the success of the technician’s ability to meet project schedules and keep process areas functioning as designed. Instrument Tech duties include performing preventive and predictive maintenance on various types of instrumentation system to maintain reliability and meet permit requirements. To meet facility operational requirements, they install new equipment, respond to issues, troubleshoot and repair a variety of industrial instruments and precision process control systems. In addition, they participate in a call-out duty rotation for after-hours response. The apprentice level of this class typically assists with and learns to perform the full range of Instrument Technician tasks under the instruction of a journey Instrument Technician and as active participant in Apprenticeship Program. The apprenticeship program is a structured 4,000-hour program involving classroom instruction plus on-the-job training and work performance. Training progress is subject to review by a training and apprenticeship committee. Upon successful completion of the prescribed training program and acquiring the required license, apprentices will be eligible for appointment as an Instrument Technician. What you’ll get to do: Work under the direction of a journey-level Instrument Technician and/or Electrician and assisting in performing a variety of skilled instrument and process control work while also obtaining the required training to get the Oregon Limited Maintenance Electrical license. Instrument technician duties include performing preventive and predictive maintenance on various types of industrial instrumentation and automation systems to maintain reliability. To meet facility operational requirements, an Instrument Technician installs new equipment, responds to issues, troubleshoots and repairs a variety of industrial instruments and precision process control systems. Typical tools of the trade used include precision hand tools, power tools, and precision calibration tools. The work completed by this position will be critical for successful operations of the treatment plant. Below are some common tasks of the Instrument Technician, Apprentice: Assists in set up, installation, and calibration of various analytical and communication equipment and instrumentation. Interprets and works from plans and/or develops sketches or designs for work, as appropriate. Participates in performing a variety of programming, diagnostic, analytical, and documentation work involving programmable controllers and graphical-user (human machine) interfaces for a variety of equipment, including but not limited to programmable logic controllers (PLCs), control panels, communications panels, distributed control systems, and pneumatic/hydraulic/instrumentation panels; research information as necessary to perform duties and maintain currency. Works to maintain and repair existing process measurement and control instrumentation equipment and systems and related transmitting equipment and systems to ensure proper operation and service. Assists in performing preventive maintenance, service and repairs Contributes in reconfiguring the programs to accommodate system upgrades and other environmental changes; documents work. Participates in designing, upgrading, installing, connecting and testing new and repaired control and monitoring systems. Collaborates to create supporting documentation, i.e., P&IDs, loop drawings per ISA Standards, Instrument Specification Sheets, etc. Assists in evaluating and assessing the safety, operability, and condition of systems; assists in ensuring that repairs and installations operate properly. Maintains records, supplies and equipment; assists in determining materials needed. Works with others to ensure quality customer service. Responsible for appropriate safety precautions Assists with designing, fabricating (exclusive of welding), installing and/or retrofitting instrument equipment and certain piping and tubing. The Ideal Candidate will have: Exposure to analytical instrumentation Process control experience and calibration Associate degree in instrumentation or equivalent vocational Certificate of Completion and or equivalent. Past experience working with a broad range of individuals and communities with diverse racial, ethnic and socio-economic backgrounds. The position will sit at the Columbia Boulevard Wastewater Treatment Plant located in North Portland but be expected to travel to the Tryon Creek Wastewater Treatment Plant located at Lake Oswego and any of the other 100 pump stations/facilities owned and operated by the O&M Group. About the Bureau of Environmental Services BES is seeking talented individuals from diverse racial, ethnic, and socio-economic backgrounds with knowledge, ability, and experience working with a broad range of individuals and communities; and that desire to work collaboratively and creatively to broaden the variety of innovative ways to partner with and serve all Portland communities. To learn more about the work we do at BES, click on the link: www.portlandoregon.gov/bes/ Our BES 10-Year Strategic Plan can be found here: https://www.portlandoregon.gov/bes/75720 This classification is represented by The District Council of Trade Unions (DCTU). To view this labor agreement, please go to https://www.portland.gov/bhr/employee-relations/labor-relations/labor-agreements and click on the appropriate link. A pplicants start at the entry salary rate. If you are a DCTU represented employee, see labor agreement for additional information or talk to your union representative City of Portland Core Values: Anti-racism | Communication | Collaboration | Equity | Transparency | Fiscal Responsibility These values guide our actions as we serve the community and engage our workforce. To learn more about the City's core values, please click here . Why work at the City of Portland? The City of Portland workforce serves a population of over 650,000. We are culture- and solutions-driven, viewing every challenge as an opportunity to learn, improve, and share our expertise. We are committed to removing systemic barriers to resources, access, and opportunity. The City is a believer in ALL people and continues to actively recruit and retain diverse top talent every day. We offer a comprehensive benefits package , including but not limited to medical, dental, vision, healthcare flexible and/or dependent care spending accounts, Carrot Fertility, basic life, short- and long-term disability coverage to eligible employees and their families. If you are open-minded, motivated, community-focused, and self-aware, please apply yourself at the City of Portland today. Work Location This position will report in person. City Council approved a human resources administrative rule in January 2023, HRAR - 4.045 , requiring employees, including those who are fully remote and hybrid, to perform work within Oregon or Washington. For more information, click here . To Qualify The following minimum qualifications are required for this posting: Ability to understand and follow oral and simple written instructionsExperience establishing and maintaining effective working relationshipsAbility to learn and apply safe work practicesExperience writing legibly and filling out simple forms with training Preferred Qualification(s): Knowledge of basic instrumentation Applicants must also possess: The ability to be a high school graduate or possess a GED Equivalency Certificate at time of hire . Ability to register as a PCC student. https://www.pcc.edu/programs/apprenticeship/se-admin/ A valid state’s driver’s license and acceptable driving record at time of hire . Ability to pass the Physical Capabilities Test after an offer of employment has been made and accepted. Ability to pass pre-employment physical examination after an offer of employment has been made and accepted. The Recruitment Process A qualifying review includes a review of each applicant’s yes/no responses to the minimum qualifications in the Supplemental Questions. Those candidates passing this review will have their work experience, education and certificates/licenses and responses to the minimum qualifications in Supplemental Questions No. 13 and 14 evaluated, weighted 100%. Only those candidates passing the work experience, education, certificates/license and Supplemental Application review for minimum qualifications will be placed on an equally ranked list. You have 14 days from the notice of the examination results to let us know if you disagree with your results. Please read the City of Portland Administrative Rule 3.01 for complete information. Additional evaluation may be required prior to final selection and/or establishment of the eligible list. Recruitment Activity Schedule: Posting Closes: 04/29/24 Applications Reviewed: week of 4/29/24 1st Eligible List: week of 2/26/2024 and every thirty days until filled Selection Phase Begins: TBD *Timeline is approximate and subject to change. Please note, all completed applications for this position must be submitted no later than on the closing date and time of this recruitment. All applications must be submitted via the City's online application process. Do not attach materials not requested. E-mailed and/or faxed applications will not be accepted. Additional Information Applicants MUST FOLLOW the process below and submit the following application materials to be considered for this position. Failure to submit the required application materials will result in elimination from further consideration: A COMPLETED Resume or Work Experience document. This document should contain information about work experience, education, certifications and licenses. Please note, a cover letter is NOT required for this recruitment. A resume or work experience document should be attached. Submit responses to the minimum qualification Supplemental Questions: Read and complete the yes / no minimum qualification Supplemental Questions 3- 12. Provide written responses to the minimum qualification Supplemental Questions 13-14. Failure to respond to this minimum qualification questions (13-14) will result in elimination from further consideration. Work Status: Non-citizen applicants must be authorized to work in the United States at the time of application. Veterans' Preference: If you are requesting Veterans' Preference, attach a copy of your DD214/DD215 and/or Veterans Administration letter stating your disability to your profile, as well as checking the box identifying yourself as a Veteran. You must request Veterans' Preference AND include a copy of your documentation for each recruitment to which you apply. Veterans' Preference documentation must be submitted no later than 11:59 PM on the closing date of this recruitment. ADA, Pregnancy, and Religious Accommodations: If you identify as a person with a disability, are pregnant or nursing, or observe a religious practice(s), and would like to request a reasonable accommodation when applying for this job, please contact the Recruiter below for assistance. Equal Employment Opportunity: It is the policy of the City of Portland that no person shall be discriminated against based on race, religion, color, sex, marital status, family status, national origin, age, mental or physical disability, protected veteran status, sexual orientation, gender identity or source of income. The City values diversity and encourages everyone who is interested in employment with the City to apply. Language Pay Differential: City of Portland employees who speak one or more languages in addition to English, may be eligible to receive a “language pay differential.” This is compensation for qualifying multilingual City employees who use their language skill to assist the community. More about the language pay differential can be found here. Did you know? The City of Portland offers "How to Apply Classes" that are free and review best practices for applying to the City. Follow the link for the most recent list of scheduled dates: https://www.portland.gov/bhr/events . Overview of the Apprentice Program This is a 4000-hour (approximately 2 years) program that provides apprentices with the knowledge and skills required to be a journey Limited Maintenance Electrician, working as a Instrument Technician, through a combination of on-the-job and outside classroom training. In addition to the 4000 hours of on-the-job training, 288 hours of related classroom training is required. The Apprentices' skill development is assessed throughout the program and raises are based on progress in the program. Apprentice will be attending classroom training at Portland Community College Swan Island Trades Center. Each apprentice will be required to enroll as student with PCC and pass any required math testing administered by the college. There is a process in place for reviewing credit for previous education, work experience, and training which may shorten the actual length of your apprenticeship program. They will also be required to submit monthly job reports to verify training is on-track with the program adjectives. Classroom training is held on weekday evenings and some Saturdays. Attendance is required for classroom training. Pay advances for the apprenticeship are determined by the TAC (Training and Apprenticeship Committee) at PCC. All applicants must review the PCC website associated with this job posting. The PCC apprenticeship website is https://www.pcc.edu/programs/apprenticeship/se-admin/ The approximately 4000 hours of On-The-Job Training are in the following areas: Work Process Motors and generators (500 Hours) Assembly and testingRepair and maintenanceInternal and external connections to change direction of rotation and speed, and for a change of supply of voltageMotor settings, drives, pulleys, gears, coupling devicesRelated mechanical equipment: Traction units, cranes, winches, hoistIn place motor cleaning, (100 hours maximum credit) Controls (1000 hours) Manual and automatic, including magnetic and solid state Trouble shooting (1000 hours) Power Distribution (500 hours) Inside and outside, high and low voltage distribution systems, maintenance and replacement Lighting (500 hours) Electrical and oriented drawings (100 hours) The remaining time is necessary to complete the apprenticeship program shall be applied according to the apprentice’s training needs by the apprenticeship committee and the employer The 288 hours of classroom related training is in the following areas: Course Hours Electricity and electronics 36 Fundamental mechanical principles 36 Mathematics of the trade 18 Instrumentation and controls 18 Federal, state and local electrical laws, codes and rules 140 Blueprint reading, electrical drawings and pictorial, block, one-line and schematic diagrams 36 Industrial electrical safety: A certified CPR (Cardiopulmonary Resuscitation) course of the committee’s choice 4 Questions? Terrol Johnson, Senior Recruiter Bureau of Human Resources terrol.johnson@portlandoregon.gov An Equal Opportunity Employer A Career with the City of Portland offers many Employee Benefits We offer a comprehensive benefits package, including but not limited to Health Care (Medical, Vision and Dental) Carrot Fertility Wellness Benefits Life Insurance Short- and Long-term disability coverage to eligible employees and their families. Employee Assistance Plan Flexible Spending Accounts Retirement Oregon Public Employees Retirement System (PERS), including contributions to the PERS IAP plan paid by employer Family Medical Leave City Paid Parental Leave AND SO MANY MORE! Benefits may vary depending on bargaining unit and employment status. Click here to review the many different benefits the City of Portland offers . Closing Date/Time: 4/29/2024 11:59 PM Pacific
Irvine Ranch Water District, CA
Irvine, California, United States
General Description We are excited to announce that we are accepting applications for the position of Metering Systems Technician III. The District Irvine Ranch Water District (IRWD) is a progressive, values-driven agency, with an international reputation for its leading-edge financial management practices, water recycling program, water use efficiency practices, water banking, urban runoff treatment, and energy generation and storage. Established in 1961 as a California Water District under the provisions of the California Water Code, IRWD is an independent special district serving central Orange County. IRWD provides high-quality drinking water, reliable sewage collection and treatment, ground-breaking recycled water programs, and environmentally sound urban runoff treatment to its customers. As an independent, not-for-profit public agency, IRWD is governed by a publicly elected five-member Board of Directors. The Board is responsible for the District's policies and decision-making. Day-to-day operations are supervised by the General Manager. Additional information can be found at the District's website: www.IRWD.com. The Position: The Metering Systems Technician III is responsible for installation, testing, replacement and repair of all size meters, both in the field and meter shop for domestic, untreated and recycled water distribution systems and for maintaining all District meter information. The ideal candidate is someone with mechanical skills and knowledge of various tasks related to meter maintenance and calibration requirements. This person is self-motivated, a self-starter, who provides excellent customer service; focused on safety and maintaining professionalism and is detail oriented, dependable and flexible while using critical thinking skills to problem solve. Leadership, Traffic control requirements and Computer Maintenance Management Systems (CMMS) database experience is desired . Distinguishing Characteristics: The Metering Systems Technician III position is distinguished from the Metering Systems Technician I and II by the following: In the absence of the Water Maintenance Supervisor, responsible for supervising the crew, preparing work schedules, daily/weekly logs and reports and administrative responsibility for the work order system. Assist in the training of Metering Systems Technician in proper procedures and responsibilities in both routine and emergency situations and provide on-the-job training. Make recommendations to the Supervisor regarding the selection, counseling and training of employees. May initiate purchase requisitions and material sign out sheets. Provide input to the Supervisor for reviews and performance evaluations of Metering Systems Technicians. Responsible for the Large Meter Maintenance Program, including all maintenance databases. Summary of Duties Install, maintain, test, calibrate, repair, troubleshoot and make recommendations for modification to all sizes (5/8" to 36") and types of District meters including: positive displacement, turbine, single jet and propeller. Read and interpret blueprints and installation manuals for metering systems and provide technical support and advice to other departments or outside customers. Coordinate with electrical and other departments regarding type of equipment and parts needed. Perform preventive and demand maintenance on all District meters utilizing the Customer Care & Billing System (CC&B) and the Computerized Maintenance Management System - Tabware (CMMS) or other computerized programs. Diagnose meter failures and repair/replace as appropriate. Provide miscellaneous support to other Operations and Maintenance groups regarding any systems maintenance. Ensure maintenance of stock and supply of meters and meter repair parts. Advise and request from supervisor, requisition of supplies, materials, tools and equipment. Coordinate with Engineering Department on new meter installations with customers, contractors and developers for recycled and domestic water meters 2" and smaller. Ensure customer and interdepartmental coordination for water interruption to perform meter maintenance. Comply with District Dechlorination Procedures. May be required to participate in District Standby Program. Comply with District safety work-related practices and attend relevant safety training. Qualifications Education: High School graduation or equivalent. For degrees obtained outside of the U.S., an official equivalency evaluation is required. Experience: Three (3) years of experience testing or replacing/repairing or calibrating meters (5/8" through 36") in either the field or shop settings. Familiarity with hand and power tools. License/Certification(s): California State Water Resources Control Board Grade III Water Distribution Certificate is required. Valid California Class C Driver's License is required. Additional Information IRWD Corporate Values Irvine Ranch Water District believes that its values drive the character, culture, and capacity of our organization. IRWD was built on values, and we weave them into the fabric of everything we do. Values are the ingredients in our recipe for both institutional and individual success. They are a code of conduct to promote positive outcomes for others and ourselves. They are more than words on a wall or a website. We live by them every day. We pledge to keep them relevant in an ever-changing world. IRWD's employees enjoy working in a safe, supportive, and nurturing environment where they form strong bonds with fellow employees. To ensure effective communication and promote a collaborative team environment, employees report to work each day in the office or in the field, depending on their positions. The physical and mental demands described below are representative of those that must be met by employees to successfully perform the essential functions of this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability and Interpersonal Communication Ability to effectively communicate both orally and in writing. Ability to communicate effectively with all levels of office/field employees, management, customers and vendors. Represent District in a professional manner when dealing with customers, outside contractors and agency officials. Ability to advise and provide interpretation to others on how to apply policies, procedures and standards to specific situations. Mathematical Ability Ability to add, subtract, multiply and divide. Ability to calculate water formulas and interpret applicable tables and charts. Knowledge of algebra. Technology Ability Familiarity with Windows based computerized environment and Preventive Maintenance data base programs desirable. Judgment and Situational Reasoning Ability Ability to use good personal judgment and discretion in performing all job functions. Must exercise independent judgment when making decisions involving specific job functions, shutdowns and most efficient utilization of staff and equipment in the absence of the Supervisor. Physical Requirements Ability to lift 50 lbs. on a routine basis and up to 80 lbs. with assistance. Must be certified annually to wear respiratory equipment. Must be clean-shaven such that facial hair does not interfere with the fit of a tight-fitting respirator. Ability to exert moderate to heavy physical effort in heavy work, typically involving some combination of climbing and balancing, stooping, kneeling, crouching, crawling, lifting, carrying, pushing, twisting and pulling. Ability to operate equipment and machinery with some operations requiring complex and rapid adjustments. Ability to work in a confined space environment and in underground locations. Environmental Adaptability Ability to work under sometimes uncomfortable conditions with exposure to environmental factors such as toxic agents, wildlife, disease, equipment, high speed traffic or machinery. IRWD offers a comprehensive benefits package for eligible employees and their eligible dependents. These benefits include the following: retirement benefits; medical, dental, vision, and life insurance; anda variety of other benefits. Benefits may vary based on employment status. This benefits overview is intended to be a summary, is not intended to be all-inclusive,and may not be applicable to all employees. Retirement Employees hired on or after January 1, 2013: The District, in compliance with the California Public Employees' Pension Reform Act of 2012 (PEPRA), implemented a third tier for new employees hired on or after January 1, 2013. New employees hired on or after January 1, 2013 who have not been in PERS membership or in membership with a reciprocal retirement system within 6 months of hire date will receive benefits under the California Public Employees Retirement System at a 2 percent at age 62 formula. This formula gradually increases to a maximum benefits of 2.5 percent at age 67. Final compensation calculations will be based on the highest three-year average of regular recurring pay. The District pays the employer's share of these costs. The employee share of the pension cost of 7.50% is paid in full by the employees hired under this formula. Employees hired on or after September 29, 2012 or "Classic" PERS members hired on or after January 1, 2013: On September 24, 2012, the IRWD Board of Directors approved the addition of a second tier to the CalPERS retirement benefits. New employees hired on or after September 29th through December 31, 2012, and employees hired on or after January 1, 2013 who have been in PERS membership or in membership with a reciprocal retirement system, will receive benefits under the California Public Employees Retirement System at 2 percent at age 60 formula. This formula gradually increases to a maximum benefit of 2.418% at age 63. The District pays the employer share of these costs and the employee share of the pension cost of 7% is paid in full by the employees hired under this formula. Final retirement compensation calculations are based on the highest three-year average of regular, recurring pay. IRWDdoes not participate or pay into Social Security except for the Medicare portion. Medical Insurance IRWD contracts with CalPERS for medical insurance coverage. Employees may elect coverage from a variety of PPO and HMO plans. The employee and District contribution for health insurance varies by plan.Coverage is effective the first day of the month following the date of hire. Dental Insurance IRWD contracts with Delta Dental for dental coverage.IRWD pays 100% of the premium for dental coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Vision Insurance IRWD contracts with the EyeMed for vision coverage. IRWD pays 100% of the premium for vision coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Life Insurance Elgible employees are provided with life insurance coverage equal to three or four times their annual salary, depending on their level of compensation. Eligible dependents are also covered for a flat benefit amount. Coverage is effective the first day of the month following the date of hire. Deferred Compensation Participation in adeferred compensation plan is available through Empower Retirement. Enrollment is voluntary and contributions are employee-paid and subject to IRS limits. The District matches employee contributions up to 3% of base pay after 1 year of employment. Paid Vacation Eligible employees begin accruing vacation benefits at the rate of 80 hours per year for the first 5 years of employment and are eligible to use paid vacation time after 6 months of employment. Employees accrue 120 hours per year after 5 years of employment and 160 hours per year after 10 years of employment. Paid Holidays The District offers 11 scheduled paid holidaysplus one personal holiday per year. Sick Leave Eligible employees accrue 96 hours of sick leave annually. Flexible Spending Accounts Eligible employees may elect to participate in the District's Flex Advantage program. This program allows employees to deposit pre-tax dollars into special accounts to be used for a variety of purposes, including paying for qualified miscellaneous health care expenses and dependent care expenses. IRWD contracts with a third party administer to process payments from employee accounts using claim forms or a Flex Spending debit card. Educational Assistance The District will share in the pre-approved educational costs of tuition and books for employees who wish to attend college or take certification classes. Closing Date/Time: Continuous
Mar 08, 2024
Full Time
General Description We are excited to announce that we are accepting applications for the position of Metering Systems Technician III. The District Irvine Ranch Water District (IRWD) is a progressive, values-driven agency, with an international reputation for its leading-edge financial management practices, water recycling program, water use efficiency practices, water banking, urban runoff treatment, and energy generation and storage. Established in 1961 as a California Water District under the provisions of the California Water Code, IRWD is an independent special district serving central Orange County. IRWD provides high-quality drinking water, reliable sewage collection and treatment, ground-breaking recycled water programs, and environmentally sound urban runoff treatment to its customers. As an independent, not-for-profit public agency, IRWD is governed by a publicly elected five-member Board of Directors. The Board is responsible for the District's policies and decision-making. Day-to-day operations are supervised by the General Manager. Additional information can be found at the District's website: www.IRWD.com. The Position: The Metering Systems Technician III is responsible for installation, testing, replacement and repair of all size meters, both in the field and meter shop for domestic, untreated and recycled water distribution systems and for maintaining all District meter information. The ideal candidate is someone with mechanical skills and knowledge of various tasks related to meter maintenance and calibration requirements. This person is self-motivated, a self-starter, who provides excellent customer service; focused on safety and maintaining professionalism and is detail oriented, dependable and flexible while using critical thinking skills to problem solve. Leadership, Traffic control requirements and Computer Maintenance Management Systems (CMMS) database experience is desired . Distinguishing Characteristics: The Metering Systems Technician III position is distinguished from the Metering Systems Technician I and II by the following: In the absence of the Water Maintenance Supervisor, responsible for supervising the crew, preparing work schedules, daily/weekly logs and reports and administrative responsibility for the work order system. Assist in the training of Metering Systems Technician in proper procedures and responsibilities in both routine and emergency situations and provide on-the-job training. Make recommendations to the Supervisor regarding the selection, counseling and training of employees. May initiate purchase requisitions and material sign out sheets. Provide input to the Supervisor for reviews and performance evaluations of Metering Systems Technicians. Responsible for the Large Meter Maintenance Program, including all maintenance databases. Summary of Duties Install, maintain, test, calibrate, repair, troubleshoot and make recommendations for modification to all sizes (5/8" to 36") and types of District meters including: positive displacement, turbine, single jet and propeller. Read and interpret blueprints and installation manuals for metering systems and provide technical support and advice to other departments or outside customers. Coordinate with electrical and other departments regarding type of equipment and parts needed. Perform preventive and demand maintenance on all District meters utilizing the Customer Care & Billing System (CC&B) and the Computerized Maintenance Management System - Tabware (CMMS) or other computerized programs. Diagnose meter failures and repair/replace as appropriate. Provide miscellaneous support to other Operations and Maintenance groups regarding any systems maintenance. Ensure maintenance of stock and supply of meters and meter repair parts. Advise and request from supervisor, requisition of supplies, materials, tools and equipment. Coordinate with Engineering Department on new meter installations with customers, contractors and developers for recycled and domestic water meters 2" and smaller. Ensure customer and interdepartmental coordination for water interruption to perform meter maintenance. Comply with District Dechlorination Procedures. May be required to participate in District Standby Program. Comply with District safety work-related practices and attend relevant safety training. Qualifications Education: High School graduation or equivalent. For degrees obtained outside of the U.S., an official equivalency evaluation is required. Experience: Three (3) years of experience testing or replacing/repairing or calibrating meters (5/8" through 36") in either the field or shop settings. Familiarity with hand and power tools. License/Certification(s): California State Water Resources Control Board Grade III Water Distribution Certificate is required. Valid California Class C Driver's License is required. Additional Information IRWD Corporate Values Irvine Ranch Water District believes that its values drive the character, culture, and capacity of our organization. IRWD was built on values, and we weave them into the fabric of everything we do. Values are the ingredients in our recipe for both institutional and individual success. They are a code of conduct to promote positive outcomes for others and ourselves. They are more than words on a wall or a website. We live by them every day. We pledge to keep them relevant in an ever-changing world. IRWD's employees enjoy working in a safe, supportive, and nurturing environment where they form strong bonds with fellow employees. To ensure effective communication and promote a collaborative team environment, employees report to work each day in the office or in the field, depending on their positions. The physical and mental demands described below are representative of those that must be met by employees to successfully perform the essential functions of this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability and Interpersonal Communication Ability to effectively communicate both orally and in writing. Ability to communicate effectively with all levels of office/field employees, management, customers and vendors. Represent District in a professional manner when dealing with customers, outside contractors and agency officials. Ability to advise and provide interpretation to others on how to apply policies, procedures and standards to specific situations. Mathematical Ability Ability to add, subtract, multiply and divide. Ability to calculate water formulas and interpret applicable tables and charts. Knowledge of algebra. Technology Ability Familiarity with Windows based computerized environment and Preventive Maintenance data base programs desirable. Judgment and Situational Reasoning Ability Ability to use good personal judgment and discretion in performing all job functions. Must exercise independent judgment when making decisions involving specific job functions, shutdowns and most efficient utilization of staff and equipment in the absence of the Supervisor. Physical Requirements Ability to lift 50 lbs. on a routine basis and up to 80 lbs. with assistance. Must be certified annually to wear respiratory equipment. Must be clean-shaven such that facial hair does not interfere with the fit of a tight-fitting respirator. Ability to exert moderate to heavy physical effort in heavy work, typically involving some combination of climbing and balancing, stooping, kneeling, crouching, crawling, lifting, carrying, pushing, twisting and pulling. Ability to operate equipment and machinery with some operations requiring complex and rapid adjustments. Ability to work in a confined space environment and in underground locations. Environmental Adaptability Ability to work under sometimes uncomfortable conditions with exposure to environmental factors such as toxic agents, wildlife, disease, equipment, high speed traffic or machinery. IRWD offers a comprehensive benefits package for eligible employees and their eligible dependents. These benefits include the following: retirement benefits; medical, dental, vision, and life insurance; anda variety of other benefits. Benefits may vary based on employment status. This benefits overview is intended to be a summary, is not intended to be all-inclusive,and may not be applicable to all employees. Retirement Employees hired on or after January 1, 2013: The District, in compliance with the California Public Employees' Pension Reform Act of 2012 (PEPRA), implemented a third tier for new employees hired on or after January 1, 2013. New employees hired on or after January 1, 2013 who have not been in PERS membership or in membership with a reciprocal retirement system within 6 months of hire date will receive benefits under the California Public Employees Retirement System at a 2 percent at age 62 formula. This formula gradually increases to a maximum benefits of 2.5 percent at age 67. Final compensation calculations will be based on the highest three-year average of regular recurring pay. The District pays the employer's share of these costs. The employee share of the pension cost of 7.50% is paid in full by the employees hired under this formula. Employees hired on or after September 29, 2012 or "Classic" PERS members hired on or after January 1, 2013: On September 24, 2012, the IRWD Board of Directors approved the addition of a second tier to the CalPERS retirement benefits. New employees hired on or after September 29th through December 31, 2012, and employees hired on or after January 1, 2013 who have been in PERS membership or in membership with a reciprocal retirement system, will receive benefits under the California Public Employees Retirement System at 2 percent at age 60 formula. This formula gradually increases to a maximum benefit of 2.418% at age 63. The District pays the employer share of these costs and the employee share of the pension cost of 7% is paid in full by the employees hired under this formula. Final retirement compensation calculations are based on the highest three-year average of regular, recurring pay. IRWDdoes not participate or pay into Social Security except for the Medicare portion. Medical Insurance IRWD contracts with CalPERS for medical insurance coverage. Employees may elect coverage from a variety of PPO and HMO plans. The employee and District contribution for health insurance varies by plan.Coverage is effective the first day of the month following the date of hire. Dental Insurance IRWD contracts with Delta Dental for dental coverage.IRWD pays 100% of the premium for dental coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Vision Insurance IRWD contracts with the EyeMed for vision coverage. IRWD pays 100% of the premium for vision coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Life Insurance Elgible employees are provided with life insurance coverage equal to three or four times their annual salary, depending on their level of compensation. Eligible dependents are also covered for a flat benefit amount. Coverage is effective the first day of the month following the date of hire. Deferred Compensation Participation in adeferred compensation plan is available through Empower Retirement. Enrollment is voluntary and contributions are employee-paid and subject to IRS limits. The District matches employee contributions up to 3% of base pay after 1 year of employment. Paid Vacation Eligible employees begin accruing vacation benefits at the rate of 80 hours per year for the first 5 years of employment and are eligible to use paid vacation time after 6 months of employment. Employees accrue 120 hours per year after 5 years of employment and 160 hours per year after 10 years of employment. Paid Holidays The District offers 11 scheduled paid holidaysplus one personal holiday per year. Sick Leave Eligible employees accrue 96 hours of sick leave annually. Flexible Spending Accounts Eligible employees may elect to participate in the District's Flex Advantage program. This program allows employees to deposit pre-tax dollars into special accounts to be used for a variety of purposes, including paying for qualified miscellaneous health care expenses and dependent care expenses. IRWD contracts with a third party administer to process payments from employee accounts using claim forms or a Flex Spending debit card. Educational Assistance The District will share in the pre-approved educational costs of tuition and books for employees who wish to attend college or take certification classes. Closing Date/Time: Continuous
City of Vallejo
Vallejo, California, United States
Description PLEASE READ THIS BULLETIN IN ITS ENTIRETY THE POSITION This recruitment is being conducted to fill one full-time vacancy. The list established by this recruitment may be used to fill future full-time, part-time, limited term, and temporary vacancies for up to one year. The ideal Plant Maintenance Supervisor will have at least four years of journey-level experience performing instrumentation/electrical or mechanical installation or repair work which includes the maintenance, repair, and alteration of industrial instrumentation/electrical mechanical systems and equipment like those found in large municipal water treatment plants and have the ability to supervise, assign, review, and participate in the work of Water Department Facilities staff responsible for maintenance and repair services for the City's water treatment and pumping facilities, systems and equipment. While not required at time of hire, the following licenses and certifications are required within specified period below: First Aid CPR certification (within 18 months from time of appointment). Forklift Operator certification (within 18 months from time of appointment). Aerial Lift platform certification (within 18 months from time of appointment). California Water Environment Association (CWEA) Mechanical Technologist Grade 3 certification (within 24 months from time of appointment). State Water Resources Control Board (SWRBC) Grade 3 Distribution Operator license (within 24 months from time of appointment). National Commission for Certified Crane Operators (NCCCO) Operators and Riggers license (within 24 months from time of appointment). Society for Maintenance and Reliability Professionals (SMRP) Maintenance and Reliability Technician certification (highly desirable). State Water Resources Control Board (SWRCB) Grade 2 Treatment Operator license (highly desirable). Association of Boards (ABC) Plant Maintenance Technologist III certification (highly desirable). THE DEPARTMENT The Vallejo Water Department is a dynamic organization engaged in growth and positive change for the benefit of our customers and community. The Department provides potable water to 121,000 customers through a highly complex system including multiple raw water sources, three treatment plants, a Sludge Dewatering Facility, 600 miles of distribution pipes, 8 pressure zones, 27 pump stations, and 37,000 service connections. Vallejo Water is a Treatment-5/Distribution-5system. In 2017, Vallejo water services transitioned from a division of Public Works, to a standalone Water Department reporting directly to the City Manager. This change gives drinking water-related operations and issues greater visibility and strategic direction for the benefit of rate-payers. The Water Department's strategic goals include: infrastructure reliability, public trust, sustainability, organizational performance, and financial viability. The Water Department has six Divisions: Water Treatment, Engineering, Distribution, Watershed and Facilities Management, and Administration/Conservation. The Water Quality Division of the Water Department is an important stakeholder in projects unfolding in Vallejo and the Advance Water Treatment Plant Operator is a key member of the team. THE CITY OF VALLEJO The City of Vallejo is located in Solano County and has a population of approximately 121,000 residents. Vallejo is a rapidly changing, highly diverse community located midway between the cities of San Francisco and Sacramento. It is a friendly, active waterfront community that attracts innovative, hardworking people and takes great pride in its 148-year history and maritime heritage. Residents of Vallejo are situated to take advantage of the best of what the area has to offer. Golf, museums, performing arts, boutique shopping, brewpubs and a wide selection of restaurants are all available in Vallejo. Residents and visitors alike enjoy Vallejo's delightful historical downtown area, weekly downtown farmer's market, and beautifully restored Victorian homes and business facades. Vallejo is also home to Six Flags Discovery Kingdom, one of America's only combination wildlife, oceanarium and theme parks. DISTINGUISHING CHARACTERISTICS This is the full supervisory level classification in the City's Water Department. Incumbents are expected to provide supervision and coordination of work, and to perform the full range of duties for their assigned unit. This class is distinguished from subordinate mechanical and instrumentation/electrical maintenance staff by the level of responsibility, complexity of duties, and high degree of independence in the performance of their duties. This classification is designated as at-will. SUPERVISION RECEIVED AND EXERCISED Receives direction from the Water Facilities Superintendent. Exercises direct supervision over plant maintenance instrumentation/electrical or mechanical staff, depending on assigned unit. Essential Functions EXAMPLES OF DUTIES The following duties are typical for this classification. Incumbents may not perform all of the listed duties and/or may be required to perform additional or different duties from those set forth below to address business needs and changing business practices. Important responsibilities and duties may include but are not limited to the following: Receive general written and/or oral work assignments from the Water Facilities Superintendent; assist in determining the type of equipment, personnel, and materials needed, as well as the relative priority of multiple tasks and projects. Plan, prioritize, schedule, assign, supervise and review the work of subordinate staff. Participate in the selection of assigned staff; provide or coordinate staff training; conduct performance evaluations; work with employees to correct deficiencies; implement disciplinary procedures when necessary. Participate in the daily inspection, preventive maintenance, calibration, installation, and repair of a variety of instrumentation and electrical equipment or mechanical equipment, depending on assigned unit. Read, interpret, and modify electrical or mechanical schematics, mechanical drawings, and specifications as necessary to install, service and/or repair equipment in accordance with related regulations; may design instrumentation, and electrical or mechanical system components and drawings, depending on assigned unit. Depending on assigned unit, install, maintain, monitor, repair, modify, calibrate, test and perform routine preventive maintenance work on water treatment and distribution plant equipment, including a wide variety of mechanical equipment or electronic recording, analyzing, indicating, controlling, telemetering and other test instruments used in large municipal water treatment plants, pump stations, storage tanks and reservoirs. Use diagnostic routines, and test equipment to verify and/or adjust control system equipment according to manufacturer's recommendations, and/or utility needs. Perform light building maintenance on pump stations, plant facilities, tanks, and reservoirs, including light carpentry, masonry, concrete, electrical and HVAC work. Prepare various reports on operations and activities. Recommend and assist in the implementation of goals and objectives; assist in the development and planning of unit programs; establish schedules and methods for providing maintenance and repair services; coordinate with other departments/divisions for the repair of equipment as required; implement policies and procedures. Participate in the preparation and administration of the assigned budget; submit budget recommendations; monitor expenditures. Obtain quotes and prepare specifications for material and equipment purchases; requisition supplies and materials as needed; ensure inventory remains stocked in warehouse. Maintain field and/or shop records including cost estimates and supplies, materials, equipment, and/or personnel used in the course of work performed. Ensure the adherence to City, departmental and safety policies and procedures by personnel; conduct training sessions with employees regarding safety, equipment operation procedures and related topics. Respond to and resolve difficult and sensitive citizen or staff inquiries and complaints. Investigate liability claims submitted to the City; provide information to appropriate staff; coordinate repair actions if required. Assist in preparation of work site for service and ensure that materials and tools are clean, properly located on the job, in the shop area, or in the service vehicle in preparation for daily work; help keep the shop area and service vehicles generally clean and orderly; clean-up work area after job is completed. Assist in the preparation of maintenance contracts for work to be performed by outside contractors; assist in the preparation of instrumentation/electrical or mechanical repair and alteration plans and specifications; oversee and inspect the work of contractors related to instrumentation/electrical or mechanical maintenance services; ensure work is accomplished in a timely and appropriate manner; ensure compliance with applicable codes. Assist in a variety of Department and Division operations; perform special projects and assignments as requested. Inspect City facilities for needed maintenance and repairs; coordinate a system for preventive maintenance. Inspect work sites before, during, and after completion to ensure work is completed in a satisfactory and thorough manner. Perform related duties and responsibilities as required. When Assigned to the Instrumentation and Electrical Unit: Perform a wide variety of field and shop instrumentation/electrical work, including the installation, monitoring, repair, modification, calibration, testing, daily inspection, and preventative maintenance of electrical, instrumentation, SCADA, and telemetry equipment, and other test instruments used in large municipal water treatment plants, pump stations, storage tanks, and reservoirs. Use a variety of hand and power tools, gauges, measuring and testing instruments common to the instrumentation and electrical trades such as multi meters, amp meter, megohm meters, signal generator, high voltage testers. Install, maintain, troubleshoot, and repair high, medium, and low voltage equipment, substations, co-generation systems, solar systems, emergency power systems, transfer switches, motors, variable frequency drives, circuits, controls, motor control centers, valve operators, rectifiers, cathodic protection systems, pump control systems, meters, digital and analog instruments, printed circuits, differential pressure transmitters, multiplex equipment, process control equipment, loss-of-head indicators, level indicators, solid state equipment, alarm circuits and systems, pressure and temperature regulators, gauges and recorders, chemical feeder controllers, water quality analyzers, PLC's (Programmable Logic Controls), SCADA, radio communications, various network systems, and other utility related components. When Assigned to the Mechanical Unit: Perform a wide variety of field and shop mechanical work, including the installation, repair, and maintenance of mechanical equipment used in large municipal water treatment plants, pump stations, storage tanks, and reservoirs. Use a variety of hand and power tools, gauges, and measuring and testing instruments common to the mechanical maintenance trades such as cutting torches, welders, impact wrenches, band saws, pipe threading machines, taps and dies, drill presses, grinders, milling machines, scales, micrometers, dial indicators, and Vernier calipers. Install, maintain, and repair pumps, valves, piping/plumbing, chemical systems, air and hydraulic systems, clarifiers, ozone generators, co-generation equipment, emergency power equipment, and other utility related components. Troubleshoot, maintain, repair, and install pumps, motors, mixers, gearboxes, bearings, valves, hydraulic controls, regulators, piping systems, chemical feed devices, oxygen systems, ozone gas production and distribution equipment, compressors, gas/diesel engines or generators, co-generation equipment, and other related equipment and machinery used in a water treatment plant and related facilities; change filters, check belt tensions, lubricate moving parts and bearings, and in inspect pumps, motors, compressors, plant equipment and facilities for proper operation and condition. Perform, and assist in the disassembly, cleaning, lubrication, and reassembly of all related plant mechanical equipment. Perform other related duties as assigned. Minimum Qualifications/Knowledge, Skills & Abilities Knowledge of: Principles, practices, techniques, and operations involved in water treatment, pumping facilities, systems and equipment; specifically, as they relate to instrumentation/electrical or mechanical systems. Principles, practices, and techniques of supervision. Operations, services, and activities of a comprehensive maintenance and repair program for water treatment and pumping system facilities. Procedures, methods, practices, materials, and equipment commonly used in an electrical or mechanical maintenance and repair program for water treatment and pumping system facilities. Occupational hazards and standard safety practices associated with an electrical or mechanical maintenance and repair program in a water treatment and pumping system environment. Pertinent Federal, State, and local laws, codes and regulations. Principles and procedures of record keeping and reporting. Principles of municipal budget preparation and control. Modern office procedures, methods and computer equipment. When Assigned to the Instrumentation and Electrical Unit: Methods, practices, and tools used in maintaining, repairing, testing, and calibrating electro-mechanical recording and metering instruments, programmable logic controllers, process control equipment, mechanical linkage, and telemetering systems. Lead supervision and training, safety practices, precautions and procedures pertaining to the work, computer-based data acquisition and control systems, microwave point-to-point and point-to-multi-point channel radio data communications equipment, telephone line interface for data communications, software diagnostic routines and test equipment, metering instruments and flow in open channel and closed loop systems. Principles, techniques, and operations involved in water treatment and distribution; common equipment, tools and materials used in electronic and instrument maintenance and repair; applied principles of electronic and electrical theory including Ohm's law, basic D.C. circuit analysis, A.C. circuit analysis; and applicable mathematics including algebra, geometry and trigonometry as related to specific work applications. When Assigned to the Mechanical Unit: Methods, practices, and tools used in maintaining, repairing, testing, identification and use of standard stationary, hand and power tool; the materials, terms, practices, and equipment common to mechanical trades, arithmetic and mechanical principles related to shop and field work. Lead supervision and training, safety practices, precautions and procedures pertaining to the work. Principles, techniques, and operations involved in water treatment and distribution; common equipment, tools and materials used in mechanical equipment maintenance and repair; applied principles of mechanical theory. Ability to: Perform a variety of advanced journey level instrumentation/electrical or mechanical work involved in the maintenance and repair of the City's water treatment plants and related facilities. Diagnose, disassemble, perform extensive repair, and rebuilding of various instrumentation/electrical or mechanical equipment and systems used in large municipal water treatment plants, pump stations, storage tanks and reservoirs. Assist in the installation, maintenance, troubleshooting, and repair of instrumentation/electrical or mechanical equipment and machinery including pumps, valves, valve operators, and chemical feed equipment. Supervise, organize, and review the work of subordinate personnel; select, supervise, train and evaluate staff; oversee the work of outside contractors. Interpret, explain and enforce City and departmental policies and procedures. Ensure crew compliance with Federal, State and local rules, laws and regulations. Maintain accurate records and prepare clear and concise reports. Perform responsible and difficult work involving the use of independent judgment and personal initiative. Conduct studies, prepare comprehensive reports, and determine cost effective ways for conducting the assigned plant maintenance operations. Operate and maintain machinery and equipment related to the maintenance and repair of water treatment and pumping facilities. Accurately determine work required and estimate the hours, materials and cost of such work. Read, interpret, explain, and follow electrical and mechanical blueprints, drawings, specifications, technical manuals, and oral and written instructions. Communicate clearly and concisely, both orally and in writing. Establish and maintain effective working relationships with those contacted in the course of work, including the public, coworkers, and vendors. Work underground in tanks, channels, or other structures while assisting in the maintenance and repair of equipment and facilities. Perform rigging as required for the lifting and placement of heavy machinery or equipment. Operate mobile equipment such as forklifts, telescoping boom trucks, stationary cranes, and man lifts. Perform various landscape and vegetation control duties within service areas. Wear personal protective equipment (PPE) appropriate for job assignments/working environments. Perform confined space entries, wear a self-contained breathing apparatus (SCBA) weighing up to 40 lbs. for extended periods of time. Respond to emergency and after hours calls. Must be willing to carry and operate a smart phone in support of 24-hour operations in assigned area of responsibility or to respond to emergency situations in off hours as required. Must be able to pass a background/criminal investigation to gain access to military base for the length of employment. Experience and Training Guidelines Any combination of experience and training that would likely provide the required knowledge and abilities is qualifying. A typical way to obtain the knowledge and abilities would be: Experience: Four years of increasingly responsible journey level experience performing instrumentation/electrical or mechanical installation or repair work which includes the maintenance, repair, and alteration of industrial instrumentation/electrical or mechanical systems and equipment like those found in large municipal water treatment plants, including one year of lead or supervisory experience. Education: High School diploma or GED, supplemented by college or technical school coursework in electrical or mechanical maintenance and repair. License or Certificate : Possession of, or ability to obtain and maintain, a valid driver's license and satisfactory driving record. Certified and proficient in confined space entry and rescue within 18 months from time of appointment. First Aid CPR certification within 18 months from time of appointment. Certified as a competent forklift operator in accordance with Title 8, Section 3650, 3664 & 3668 within 18 months from time of appointment. Aerial Lift platform certificate 18 months from time of appointment. Possession of, or ability to obtain and maintain, a SWRCB (State Water Resources Control Board) Grade 3 Distribution Operator license within 24 months from time of appointment. NCCCO (National Commission for Certified Crane Operators) operators and riggers license within 24 months from time of appointment. Class A driver's license is highly desirable. SWRCB (State Water Resources Control Board) Grade 2 Treatment Operator license is highly desirable. When Assigned to Instrumentation & Electrical Unit: Possess and maintain a CWEA (California Water Environment Association) Instrument/Electrical Grade 3 within 24 months from time of appointment. California State Division of Industrial Standards Electrician's license is highly desirable. ISA certified control systems technician (CCST) Level II certificate is highly desirable. When Assigned to Mechanical Unit: Possess and maintain a CWEA (California Water Environment Association) Mechanical Technologist Grade 3 within 24 months from time of appointment. Society for Maintenance and Reliability Professionals (SMRP) Certified Maintenance and Reliability Technician is highly desirable. Association of Boards (ABC) Certification: Plant Maintenance Technologist Certification III is highly desirable. *Any license, certification, or registration required for this position shall be maintained (i.e. active and in good standing) at all times during employment with City of Vallejo. For continued employment with City of Vallejo, you must maintain such license, certification, or registration to meet the minimum qualifications of this position. Additional Information SUPPLEMENTAL INFORMATION Working Conditions Water treatment plant, pump stations, storage locations and field setting with travel from site to site; exposure to noise, dust, grease, smoke, fumes, noxious odors, gases, mechanical and electrical hazards, and all types of weather and temperature conditions; work in or around water; work and/or walk on various types of surfaces including slippery or uneven surfaces; occasionally work at heights; incumbents must be willing to work overtime and off hour shifts in emergency situations. Primary functions require sufficient physical ability and mobility to work in an office, plant and field setting; to walk, stand, and sit for prolonged periods of time; to frequently stoop, bend, kneel, crouch, crawl, climb, reach, twist, grasp, and make repetitive hand movement in the performance of daily duties; to climb unusual heights on ladders; to lift, carry, push, and/or pull moderate to heavy amounts of weight; to operate assigned equipment and vehicles; and to verbally communicate to exchange information. Operating equipment and machines requires making precise arm-hand position movements, fine, highly controlled muscular movements, standing for extended periods of time unable to sit or rest at will. Many aspects involve making skillful, controlled manipulations of small objects. Performs tasks requiring: strength and stamina, such as lifting and moving equipment weighing up to 50 pounds; sitting, standing, walking on uneven or slippery surfaces, kneeling, bending, stooping, squatting, and grasping; ascending and descending stairs and ladders; work both inside and outside with exposure to weather, odors, dust and pollen; exposure to chemicals, skin irritants, fumes and solvents; frequent and repetitive hand and arm motion; hand and finger dexterity sufficient to use small tools and key pads; the ability to see well enough to read gauges and documents; the ability to distinguish colors; the ability to communicate verbally, including projecting a voice that can be heard in a noisy environment; the ability to hear and distinguish various sounds, such as alarms, voices of co-workers and sounds of operating equipment in both quiet and noisy environments; and the ability to sit or stand for extended periods of time. Operating a forklift or crane requires coordinating the movement of more than one limb simultaneously. Working on equipment often involves bending or stooping repeatedly or continually over time. Working on overhead systems requires lifting arms above shoulder level. Work is performed in sumps, vaults, galleys, and other small, cramped areas and involves sitting/standing for extended periods of time with the inability to change positions. Work on overhead and or roof-mounted equipment is performed at elevated heights greater than 10 feet. Work often requires walking over rough, uneven, or rocky surfaces and is performed in a variety of weather conditions with exposure to the elements. Water Facilities Maintenance staff must be able to hear alarms, carry equipment and or tools weighing more than 50 pounds more than 20 feet. Some work is performed in enclosed spaces with exposure to temperatures as high as 120 degrees Fahrenheit. A self-contained breathing apparatus may be necessary when working in confined spaces and other hazardous locations. Must be able to pass a background/criminal investigation to gain access to military base for the length of employment. The Recruitment & Selection Process Applications are due by 5:00 P.M. on Monday, April 8, 2024. Applicants must submit a completed City of Vallejo online application, including all responses to the Supplemental Questionnaire (Resume/Cover Letter Optional), by the posted deadline in order to be considered. NOTE: If you have problems creating a user account, obtaining your already created account information, or submitting your online application, please contact governmentjobs.com applicant support directly at 855-524-5627. City of Vallejo staff are unable to assist with these issues. Applications will be screened for overall qualifications the week of April 8, 2024. Applicants who meet the minimum qualifications will have their supplemental responses scored by subject matter experts the week of April 8, 2024. The most qualified applicants from the scoring of the supplemental questions will be invited for an Oral Panel Interview. Oral Panel Interviews are tentatively scheduled to take place the week of April 29, 2024. Oral Panel Interviews are weighted at 100% of the candidates' score. Candidates must achieve a minimum passing score of 70%. Those achieving 70% or higher will be placed on the Register of Eligibles (eligible list) and may be considered to fill positions for up to one year. The City reserves the right to limit the number of candidates to those determined to be best qualified based upon all requested application materials, including training and experience, current resume, and responses to supplemental questions. Candidates placed on the Register of Eligibles (eligible list) will be referred to the department for final interviews based on their performance in the exam. The number of candidates referred for a hiring interview is at the discretion of the hiring department. REASONABLE ACCOMMODATIONS The City of Vallejo is committed to providing reasonable accommodation to applicants as required by the Americans with Disabilities Act (ADA) and the Fair Employment and Housing Act (FEHA). Qualified individuals with disabilities who need a reasonable accommodation during the application, assessment or selection process may contact the Human Resources Department to request an accommodation. Please contact Sukari Dixon at (707) 648-4398 or send an email to: sukari.dixon@cityofvallejo.net no later than April 8, 2024, at 5:00 p.m. PRIOR TO HIRE The selected candidate will be required to: 1) Submit to reference checks 2) Submit to and successfully pass a pre-employment background check, including fingerprint check. 3) Successfully complete a job-related pre-placement medical exam. 4) Provide proof of legal right to work in the United States. Disaster Service Workers - All City of Vallejo ("City") employees are designated Disaster Service Workers ("DSW") by state law (California Government Code Section 3100-3109). Employment with the City requires the affirmation of a loyalty oath to this effect. Employees are required to complete all DSW-related training as assigned and to return to work as ordered in the event of an emergency. Veteran's Preference - Veteran's preference points will be applied in accordance with Civil Service Rule 24. A copy of the DD 214 form must be filed at time of application. Equal Opportunity Employer (EOE ) - The City of Vallejo is an Equal Opportunity Employer. It is the policy of the City of Vallejo to provide equal employment opportunity for all qualified persons. All applicants will be considered without regard to race, color, religion, sex, national origin, age, disability, sexual orientation, gender, gender identity, gender expression, marital status, ancestry, medical condition (cancer and genetic characteristics), genetic information, or denial of medical and family care leave, or any other non-job-related factors. Note: The provisions in this bulletin do not constitute a contract, expressed or implied, and any provisions contained in this bulletin may be modified or revoked without notice. Closing Date/Time: 4/8/2024 5:00 PM Pacific
Mar 12, 2024
Full Time
Description PLEASE READ THIS BULLETIN IN ITS ENTIRETY THE POSITION This recruitment is being conducted to fill one full-time vacancy. The list established by this recruitment may be used to fill future full-time, part-time, limited term, and temporary vacancies for up to one year. The ideal Plant Maintenance Supervisor will have at least four years of journey-level experience performing instrumentation/electrical or mechanical installation or repair work which includes the maintenance, repair, and alteration of industrial instrumentation/electrical mechanical systems and equipment like those found in large municipal water treatment plants and have the ability to supervise, assign, review, and participate in the work of Water Department Facilities staff responsible for maintenance and repair services for the City's water treatment and pumping facilities, systems and equipment. While not required at time of hire, the following licenses and certifications are required within specified period below: First Aid CPR certification (within 18 months from time of appointment). Forklift Operator certification (within 18 months from time of appointment). Aerial Lift platform certification (within 18 months from time of appointment). California Water Environment Association (CWEA) Mechanical Technologist Grade 3 certification (within 24 months from time of appointment). State Water Resources Control Board (SWRBC) Grade 3 Distribution Operator license (within 24 months from time of appointment). National Commission for Certified Crane Operators (NCCCO) Operators and Riggers license (within 24 months from time of appointment). Society for Maintenance and Reliability Professionals (SMRP) Maintenance and Reliability Technician certification (highly desirable). State Water Resources Control Board (SWRCB) Grade 2 Treatment Operator license (highly desirable). Association of Boards (ABC) Plant Maintenance Technologist III certification (highly desirable). THE DEPARTMENT The Vallejo Water Department is a dynamic organization engaged in growth and positive change for the benefit of our customers and community. The Department provides potable water to 121,000 customers through a highly complex system including multiple raw water sources, three treatment plants, a Sludge Dewatering Facility, 600 miles of distribution pipes, 8 pressure zones, 27 pump stations, and 37,000 service connections. Vallejo Water is a Treatment-5/Distribution-5system. In 2017, Vallejo water services transitioned from a division of Public Works, to a standalone Water Department reporting directly to the City Manager. This change gives drinking water-related operations and issues greater visibility and strategic direction for the benefit of rate-payers. The Water Department's strategic goals include: infrastructure reliability, public trust, sustainability, organizational performance, and financial viability. The Water Department has six Divisions: Water Treatment, Engineering, Distribution, Watershed and Facilities Management, and Administration/Conservation. The Water Quality Division of the Water Department is an important stakeholder in projects unfolding in Vallejo and the Advance Water Treatment Plant Operator is a key member of the team. THE CITY OF VALLEJO The City of Vallejo is located in Solano County and has a population of approximately 121,000 residents. Vallejo is a rapidly changing, highly diverse community located midway between the cities of San Francisco and Sacramento. It is a friendly, active waterfront community that attracts innovative, hardworking people and takes great pride in its 148-year history and maritime heritage. Residents of Vallejo are situated to take advantage of the best of what the area has to offer. Golf, museums, performing arts, boutique shopping, brewpubs and a wide selection of restaurants are all available in Vallejo. Residents and visitors alike enjoy Vallejo's delightful historical downtown area, weekly downtown farmer's market, and beautifully restored Victorian homes and business facades. Vallejo is also home to Six Flags Discovery Kingdom, one of America's only combination wildlife, oceanarium and theme parks. DISTINGUISHING CHARACTERISTICS This is the full supervisory level classification in the City's Water Department. Incumbents are expected to provide supervision and coordination of work, and to perform the full range of duties for their assigned unit. This class is distinguished from subordinate mechanical and instrumentation/electrical maintenance staff by the level of responsibility, complexity of duties, and high degree of independence in the performance of their duties. This classification is designated as at-will. SUPERVISION RECEIVED AND EXERCISED Receives direction from the Water Facilities Superintendent. Exercises direct supervision over plant maintenance instrumentation/electrical or mechanical staff, depending on assigned unit. Essential Functions EXAMPLES OF DUTIES The following duties are typical for this classification. Incumbents may not perform all of the listed duties and/or may be required to perform additional or different duties from those set forth below to address business needs and changing business practices. Important responsibilities and duties may include but are not limited to the following: Receive general written and/or oral work assignments from the Water Facilities Superintendent; assist in determining the type of equipment, personnel, and materials needed, as well as the relative priority of multiple tasks and projects. Plan, prioritize, schedule, assign, supervise and review the work of subordinate staff. Participate in the selection of assigned staff; provide or coordinate staff training; conduct performance evaluations; work with employees to correct deficiencies; implement disciplinary procedures when necessary. Participate in the daily inspection, preventive maintenance, calibration, installation, and repair of a variety of instrumentation and electrical equipment or mechanical equipment, depending on assigned unit. Read, interpret, and modify electrical or mechanical schematics, mechanical drawings, and specifications as necessary to install, service and/or repair equipment in accordance with related regulations; may design instrumentation, and electrical or mechanical system components and drawings, depending on assigned unit. Depending on assigned unit, install, maintain, monitor, repair, modify, calibrate, test and perform routine preventive maintenance work on water treatment and distribution plant equipment, including a wide variety of mechanical equipment or electronic recording, analyzing, indicating, controlling, telemetering and other test instruments used in large municipal water treatment plants, pump stations, storage tanks and reservoirs. Use diagnostic routines, and test equipment to verify and/or adjust control system equipment according to manufacturer's recommendations, and/or utility needs. Perform light building maintenance on pump stations, plant facilities, tanks, and reservoirs, including light carpentry, masonry, concrete, electrical and HVAC work. Prepare various reports on operations and activities. Recommend and assist in the implementation of goals and objectives; assist in the development and planning of unit programs; establish schedules and methods for providing maintenance and repair services; coordinate with other departments/divisions for the repair of equipment as required; implement policies and procedures. Participate in the preparation and administration of the assigned budget; submit budget recommendations; monitor expenditures. Obtain quotes and prepare specifications for material and equipment purchases; requisition supplies and materials as needed; ensure inventory remains stocked in warehouse. Maintain field and/or shop records including cost estimates and supplies, materials, equipment, and/or personnel used in the course of work performed. Ensure the adherence to City, departmental and safety policies and procedures by personnel; conduct training sessions with employees regarding safety, equipment operation procedures and related topics. Respond to and resolve difficult and sensitive citizen or staff inquiries and complaints. Investigate liability claims submitted to the City; provide information to appropriate staff; coordinate repair actions if required. Assist in preparation of work site for service and ensure that materials and tools are clean, properly located on the job, in the shop area, or in the service vehicle in preparation for daily work; help keep the shop area and service vehicles generally clean and orderly; clean-up work area after job is completed. Assist in the preparation of maintenance contracts for work to be performed by outside contractors; assist in the preparation of instrumentation/electrical or mechanical repair and alteration plans and specifications; oversee and inspect the work of contractors related to instrumentation/electrical or mechanical maintenance services; ensure work is accomplished in a timely and appropriate manner; ensure compliance with applicable codes. Assist in a variety of Department and Division operations; perform special projects and assignments as requested. Inspect City facilities for needed maintenance and repairs; coordinate a system for preventive maintenance. Inspect work sites before, during, and after completion to ensure work is completed in a satisfactory and thorough manner. Perform related duties and responsibilities as required. When Assigned to the Instrumentation and Electrical Unit: Perform a wide variety of field and shop instrumentation/electrical work, including the installation, monitoring, repair, modification, calibration, testing, daily inspection, and preventative maintenance of electrical, instrumentation, SCADA, and telemetry equipment, and other test instruments used in large municipal water treatment plants, pump stations, storage tanks, and reservoirs. Use a variety of hand and power tools, gauges, measuring and testing instruments common to the instrumentation and electrical trades such as multi meters, amp meter, megohm meters, signal generator, high voltage testers. Install, maintain, troubleshoot, and repair high, medium, and low voltage equipment, substations, co-generation systems, solar systems, emergency power systems, transfer switches, motors, variable frequency drives, circuits, controls, motor control centers, valve operators, rectifiers, cathodic protection systems, pump control systems, meters, digital and analog instruments, printed circuits, differential pressure transmitters, multiplex equipment, process control equipment, loss-of-head indicators, level indicators, solid state equipment, alarm circuits and systems, pressure and temperature regulators, gauges and recorders, chemical feeder controllers, water quality analyzers, PLC's (Programmable Logic Controls), SCADA, radio communications, various network systems, and other utility related components. When Assigned to the Mechanical Unit: Perform a wide variety of field and shop mechanical work, including the installation, repair, and maintenance of mechanical equipment used in large municipal water treatment plants, pump stations, storage tanks, and reservoirs. Use a variety of hand and power tools, gauges, and measuring and testing instruments common to the mechanical maintenance trades such as cutting torches, welders, impact wrenches, band saws, pipe threading machines, taps and dies, drill presses, grinders, milling machines, scales, micrometers, dial indicators, and Vernier calipers. Install, maintain, and repair pumps, valves, piping/plumbing, chemical systems, air and hydraulic systems, clarifiers, ozone generators, co-generation equipment, emergency power equipment, and other utility related components. Troubleshoot, maintain, repair, and install pumps, motors, mixers, gearboxes, bearings, valves, hydraulic controls, regulators, piping systems, chemical feed devices, oxygen systems, ozone gas production and distribution equipment, compressors, gas/diesel engines or generators, co-generation equipment, and other related equipment and machinery used in a water treatment plant and related facilities; change filters, check belt tensions, lubricate moving parts and bearings, and in inspect pumps, motors, compressors, plant equipment and facilities for proper operation and condition. Perform, and assist in the disassembly, cleaning, lubrication, and reassembly of all related plant mechanical equipment. Perform other related duties as assigned. Minimum Qualifications/Knowledge, Skills & Abilities Knowledge of: Principles, practices, techniques, and operations involved in water treatment, pumping facilities, systems and equipment; specifically, as they relate to instrumentation/electrical or mechanical systems. Principles, practices, and techniques of supervision. Operations, services, and activities of a comprehensive maintenance and repair program for water treatment and pumping system facilities. Procedures, methods, practices, materials, and equipment commonly used in an electrical or mechanical maintenance and repair program for water treatment and pumping system facilities. Occupational hazards and standard safety practices associated with an electrical or mechanical maintenance and repair program in a water treatment and pumping system environment. Pertinent Federal, State, and local laws, codes and regulations. Principles and procedures of record keeping and reporting. Principles of municipal budget preparation and control. Modern office procedures, methods and computer equipment. When Assigned to the Instrumentation and Electrical Unit: Methods, practices, and tools used in maintaining, repairing, testing, and calibrating electro-mechanical recording and metering instruments, programmable logic controllers, process control equipment, mechanical linkage, and telemetering systems. Lead supervision and training, safety practices, precautions and procedures pertaining to the work, computer-based data acquisition and control systems, microwave point-to-point and point-to-multi-point channel radio data communications equipment, telephone line interface for data communications, software diagnostic routines and test equipment, metering instruments and flow in open channel and closed loop systems. Principles, techniques, and operations involved in water treatment and distribution; common equipment, tools and materials used in electronic and instrument maintenance and repair; applied principles of electronic and electrical theory including Ohm's law, basic D.C. circuit analysis, A.C. circuit analysis; and applicable mathematics including algebra, geometry and trigonometry as related to specific work applications. When Assigned to the Mechanical Unit: Methods, practices, and tools used in maintaining, repairing, testing, identification and use of standard stationary, hand and power tool; the materials, terms, practices, and equipment common to mechanical trades, arithmetic and mechanical principles related to shop and field work. Lead supervision and training, safety practices, precautions and procedures pertaining to the work. Principles, techniques, and operations involved in water treatment and distribution; common equipment, tools and materials used in mechanical equipment maintenance and repair; applied principles of mechanical theory. Ability to: Perform a variety of advanced journey level instrumentation/electrical or mechanical work involved in the maintenance and repair of the City's water treatment plants and related facilities. Diagnose, disassemble, perform extensive repair, and rebuilding of various instrumentation/electrical or mechanical equipment and systems used in large municipal water treatment plants, pump stations, storage tanks and reservoirs. Assist in the installation, maintenance, troubleshooting, and repair of instrumentation/electrical or mechanical equipment and machinery including pumps, valves, valve operators, and chemical feed equipment. Supervise, organize, and review the work of subordinate personnel; select, supervise, train and evaluate staff; oversee the work of outside contractors. Interpret, explain and enforce City and departmental policies and procedures. Ensure crew compliance with Federal, State and local rules, laws and regulations. Maintain accurate records and prepare clear and concise reports. Perform responsible and difficult work involving the use of independent judgment and personal initiative. Conduct studies, prepare comprehensive reports, and determine cost effective ways for conducting the assigned plant maintenance operations. Operate and maintain machinery and equipment related to the maintenance and repair of water treatment and pumping facilities. Accurately determine work required and estimate the hours, materials and cost of such work. Read, interpret, explain, and follow electrical and mechanical blueprints, drawings, specifications, technical manuals, and oral and written instructions. Communicate clearly and concisely, both orally and in writing. Establish and maintain effective working relationships with those contacted in the course of work, including the public, coworkers, and vendors. Work underground in tanks, channels, or other structures while assisting in the maintenance and repair of equipment and facilities. Perform rigging as required for the lifting and placement of heavy machinery or equipment. Operate mobile equipment such as forklifts, telescoping boom trucks, stationary cranes, and man lifts. Perform various landscape and vegetation control duties within service areas. Wear personal protective equipment (PPE) appropriate for job assignments/working environments. Perform confined space entries, wear a self-contained breathing apparatus (SCBA) weighing up to 40 lbs. for extended periods of time. Respond to emergency and after hours calls. Must be willing to carry and operate a smart phone in support of 24-hour operations in assigned area of responsibility or to respond to emergency situations in off hours as required. Must be able to pass a background/criminal investigation to gain access to military base for the length of employment. Experience and Training Guidelines Any combination of experience and training that would likely provide the required knowledge and abilities is qualifying. A typical way to obtain the knowledge and abilities would be: Experience: Four years of increasingly responsible journey level experience performing instrumentation/electrical or mechanical installation or repair work which includes the maintenance, repair, and alteration of industrial instrumentation/electrical or mechanical systems and equipment like those found in large municipal water treatment plants, including one year of lead or supervisory experience. Education: High School diploma or GED, supplemented by college or technical school coursework in electrical or mechanical maintenance and repair. License or Certificate : Possession of, or ability to obtain and maintain, a valid driver's license and satisfactory driving record. Certified and proficient in confined space entry and rescue within 18 months from time of appointment. First Aid CPR certification within 18 months from time of appointment. Certified as a competent forklift operator in accordance with Title 8, Section 3650, 3664 & 3668 within 18 months from time of appointment. Aerial Lift platform certificate 18 months from time of appointment. Possession of, or ability to obtain and maintain, a SWRCB (State Water Resources Control Board) Grade 3 Distribution Operator license within 24 months from time of appointment. NCCCO (National Commission for Certified Crane Operators) operators and riggers license within 24 months from time of appointment. Class A driver's license is highly desirable. SWRCB (State Water Resources Control Board) Grade 2 Treatment Operator license is highly desirable. When Assigned to Instrumentation & Electrical Unit: Possess and maintain a CWEA (California Water Environment Association) Instrument/Electrical Grade 3 within 24 months from time of appointment. California State Division of Industrial Standards Electrician's license is highly desirable. ISA certified control systems technician (CCST) Level II certificate is highly desirable. When Assigned to Mechanical Unit: Possess and maintain a CWEA (California Water Environment Association) Mechanical Technologist Grade 3 within 24 months from time of appointment. Society for Maintenance and Reliability Professionals (SMRP) Certified Maintenance and Reliability Technician is highly desirable. Association of Boards (ABC) Certification: Plant Maintenance Technologist Certification III is highly desirable. *Any license, certification, or registration required for this position shall be maintained (i.e. active and in good standing) at all times during employment with City of Vallejo. For continued employment with City of Vallejo, you must maintain such license, certification, or registration to meet the minimum qualifications of this position. Additional Information SUPPLEMENTAL INFORMATION Working Conditions Water treatment plant, pump stations, storage locations and field setting with travel from site to site; exposure to noise, dust, grease, smoke, fumes, noxious odors, gases, mechanical and electrical hazards, and all types of weather and temperature conditions; work in or around water; work and/or walk on various types of surfaces including slippery or uneven surfaces; occasionally work at heights; incumbents must be willing to work overtime and off hour shifts in emergency situations. Primary functions require sufficient physical ability and mobility to work in an office, plant and field setting; to walk, stand, and sit for prolonged periods of time; to frequently stoop, bend, kneel, crouch, crawl, climb, reach, twist, grasp, and make repetitive hand movement in the performance of daily duties; to climb unusual heights on ladders; to lift, carry, push, and/or pull moderate to heavy amounts of weight; to operate assigned equipment and vehicles; and to verbally communicate to exchange information. Operating equipment and machines requires making precise arm-hand position movements, fine, highly controlled muscular movements, standing for extended periods of time unable to sit or rest at will. Many aspects involve making skillful, controlled manipulations of small objects. Performs tasks requiring: strength and stamina, such as lifting and moving equipment weighing up to 50 pounds; sitting, standing, walking on uneven or slippery surfaces, kneeling, bending, stooping, squatting, and grasping; ascending and descending stairs and ladders; work both inside and outside with exposure to weather, odors, dust and pollen; exposure to chemicals, skin irritants, fumes and solvents; frequent and repetitive hand and arm motion; hand and finger dexterity sufficient to use small tools and key pads; the ability to see well enough to read gauges and documents; the ability to distinguish colors; the ability to communicate verbally, including projecting a voice that can be heard in a noisy environment; the ability to hear and distinguish various sounds, such as alarms, voices of co-workers and sounds of operating equipment in both quiet and noisy environments; and the ability to sit or stand for extended periods of time. Operating a forklift or crane requires coordinating the movement of more than one limb simultaneously. Working on equipment often involves bending or stooping repeatedly or continually over time. Working on overhead systems requires lifting arms above shoulder level. Work is performed in sumps, vaults, galleys, and other small, cramped areas and involves sitting/standing for extended periods of time with the inability to change positions. Work on overhead and or roof-mounted equipment is performed at elevated heights greater than 10 feet. Work often requires walking over rough, uneven, or rocky surfaces and is performed in a variety of weather conditions with exposure to the elements. Water Facilities Maintenance staff must be able to hear alarms, carry equipment and or tools weighing more than 50 pounds more than 20 feet. Some work is performed in enclosed spaces with exposure to temperatures as high as 120 degrees Fahrenheit. A self-contained breathing apparatus may be necessary when working in confined spaces and other hazardous locations. Must be able to pass a background/criminal investigation to gain access to military base for the length of employment. The Recruitment & Selection Process Applications are due by 5:00 P.M. on Monday, April 8, 2024. Applicants must submit a completed City of Vallejo online application, including all responses to the Supplemental Questionnaire (Resume/Cover Letter Optional), by the posted deadline in order to be considered. NOTE: If you have problems creating a user account, obtaining your already created account information, or submitting your online application, please contact governmentjobs.com applicant support directly at 855-524-5627. City of Vallejo staff are unable to assist with these issues. Applications will be screened for overall qualifications the week of April 8, 2024. Applicants who meet the minimum qualifications will have their supplemental responses scored by subject matter experts the week of April 8, 2024. The most qualified applicants from the scoring of the supplemental questions will be invited for an Oral Panel Interview. Oral Panel Interviews are tentatively scheduled to take place the week of April 29, 2024. Oral Panel Interviews are weighted at 100% of the candidates' score. Candidates must achieve a minimum passing score of 70%. Those achieving 70% or higher will be placed on the Register of Eligibles (eligible list) and may be considered to fill positions for up to one year. The City reserves the right to limit the number of candidates to those determined to be best qualified based upon all requested application materials, including training and experience, current resume, and responses to supplemental questions. Candidates placed on the Register of Eligibles (eligible list) will be referred to the department for final interviews based on their performance in the exam. The number of candidates referred for a hiring interview is at the discretion of the hiring department. REASONABLE ACCOMMODATIONS The City of Vallejo is committed to providing reasonable accommodation to applicants as required by the Americans with Disabilities Act (ADA) and the Fair Employment and Housing Act (FEHA). Qualified individuals with disabilities who need a reasonable accommodation during the application, assessment or selection process may contact the Human Resources Department to request an accommodation. Please contact Sukari Dixon at (707) 648-4398 or send an email to: sukari.dixon@cityofvallejo.net no later than April 8, 2024, at 5:00 p.m. PRIOR TO HIRE The selected candidate will be required to: 1) Submit to reference checks 2) Submit to and successfully pass a pre-employment background check, including fingerprint check. 3) Successfully complete a job-related pre-placement medical exam. 4) Provide proof of legal right to work in the United States. Disaster Service Workers - All City of Vallejo ("City") employees are designated Disaster Service Workers ("DSW") by state law (California Government Code Section 3100-3109). Employment with the City requires the affirmation of a loyalty oath to this effect. Employees are required to complete all DSW-related training as assigned and to return to work as ordered in the event of an emergency. Veteran's Preference - Veteran's preference points will be applied in accordance with Civil Service Rule 24. A copy of the DD 214 form must be filed at time of application. Equal Opportunity Employer (EOE ) - The City of Vallejo is an Equal Opportunity Employer. It is the policy of the City of Vallejo to provide equal employment opportunity for all qualified persons. All applicants will be considered without regard to race, color, religion, sex, national origin, age, disability, sexual orientation, gender, gender identity, gender expression, marital status, ancestry, medical condition (cancer and genetic characteristics), genetic information, or denial of medical and family care leave, or any other non-job-related factors. Note: The provisions in this bulletin do not constitute a contract, expressed or implied, and any provisions contained in this bulletin may be modified or revoked without notice. Closing Date/Time: 4/8/2024 5:00 PM Pacific
Marketing Statement Ride BART to a satisfying career that lets you both: 1) make a difference to Bay Area residents, and 2) enjoy excellent pay, benefits, and employment stability. BART is looking for people who like to be challenged, work in a fast-paced environment, and have a passion for connecting riders to work, school and other places they need to go. BART offers a competitive salary, comprehensive health benefits, paid time off, and the CalPERS retirement program. Job Summary Pay Rate SEIU Maint Worker III Step 76: $39.48/hour to Step 99: $51.61/hour Starting hourly rate will be $39.48/hour (Step 76) for external candidates Reports To Variable Current Assignment This announcement will be used to establish an eligibility list of qualified candidates. Under general supervision, performs skilled preventive maintenance, troubleshooting, primary and some secondary repair, and modification to a variety of electronic and electro-mechanical equipment and components found in revenue vehicles; performs related work as assigned. Selection Process This is a SEIU Local 1021 Bargaining unit position. However, All SEIU members must follow the "Bid Form Process", failure to comply will invalidate an employee's application. The selection process will include a screening for minimum qualifications as listed in this posting and may additionally involve a skills/performance test, written exam, and/or a panel interview. Outside applicants will not be considered until all employees who have applied have been considered first. Application Process All SEIU Local 1021 members MUST submit their bid forms in the bid box. Failure to comply may invalidate the employee's bid. Current Non-SEIU employees are strongly encouraged to apply online, either at www.bart.gov/jobs, or on WebBART. Current Non-SEIU employees may also apply using a BART paper application by delivering the completed form to the Human Resources Department, or by mailing it to P. O. Box 12688, Oakland, CA 94604-2688. On line or paper applications are considered to provide supplemental information and should not be considered a substitution for the bid form itself. Applications must be complete by the closing date and time listed on the job announcement. Examples of Duties Following a pre-established schedule, performs preventive maintenance, testing and adjustment of electronic and related electro-mechanical systems found on transit vehicles, including those associated with propulsion, train control, brake control, air conditioning, annunciation, communications, door control, lighting, and auxiliary electrical supply. Troubleshoots and performs primary maintenance on such systems, removing and replacing components as required to enable vehicles to be returned to revenue service. Responds to and assesses transit vehicle operating problems in the field. Makes field repairs to vehicles, provides technical information to central operations and maintenance control staff regarding equipment status and safety. Performs major repair of vehicles involved in accidents. Performs modifications to revenue vehicle electronic and electro-mechanical systems, as directed by engineering and supervisory staff. Suggests improvements and works with engineering and other maintenance staff regarding modifications. Uses diagnostic test equipment and precision measuring devices in the course of the work; may fabricate new testing equipment as required for use on new components and systems. Performs secondary dismantling and repair of electronic and electro-mechanical systems. Verifies performance of new or modified systems or equipment. Works closely with transit vehicle mechanics in troubleshooting problems and performing primary repairs. Reads and interprets diagrams, engineering drawings, manuals, schematics and work orders. Measures, tests and inspects completed work to confirm adherence to specifications. Documents work performed and parts and materials used; follows specified safety procedures. Minimum Qualifications Education Associate in Science degree in electronics from an accredited community college or an Electronics Credential from an accredited electronics certificate program, or its equivalent (i.e., completion of a military electronics training program). Substitution Four (4) years of verifiable full-time work experience in electronic maintenance (troubleshooting, repair, and maintenance of electronic and/or electro-mechanical equipment) can be substituted for the education. Other Requirements : Must possess adequate color vision and be physically capable of working in confining workspaces and lifting equipment weighing up to 70 pounds. Must be willing to work weekends, holidays, off hours shifts and occasional emergency overtime. Must be able to climb ladders to perform railcar maintenance work. Knowledge and Skills Knowledge of : Basic operating principles of analog and digital electronics, electrical and electronic circuitry, and associated mechanical mechanisms, methods, equipment and materials used in the primary maintenance and repair of a variety of electronic and electro-mechanical systems, components and equipment. Use and care of testing and power and hand tools of the trade. Troubleshooting and diagnostic techniques. Shop arithmetic as required for the trade. Safety practices pertaining to the work. Skill in : Diagnosing and repairing operational problems in a variety of electronic and electro-mechanical systems, components and equipment. Performing preventive maintenance on and modifications to electronic systems and components. Reading and interpreting engineering drawings, diagrams, manuals and work orders. Using and maintaining hand and power tools and testing equipment of the trade. Understanding and following oral and written directions. Maintaining accurate records of work performed and materials used. Establishing and maintaining effective working relationships with those contacted in the course of the work. Equal Employment Opportunity GroupBox1 The San Francisco Bay Area Rapid Transit District is an equal opportunity employer. Applicants shall not be discriminated against because of race, color, sex, sexual orientation, gender identity, gender expression, age (40 and above), religion, national origin (including language use restrictions), disability (mental and physical, including HIV and AIDS), ancestry, marital status, military status, veteran status, medical condition (cancer/genetic characteristics and information), or any protected category prohibited by local, state or federal laws. The BART Human Resources Department will make reasonable efforts in the examination process to accommodate persons with disabilities or for religious reasons. Please advise the Human Resources Department of any special needs in advance of the examination by emailing at least 5 days before your examination date at employment@bart.gov . Qualified veterans may be eligible to obtain additional veteran's credit in the selection process for this recruitment (effective Jan. 1, 2013). To obtain the credit, veterans must attach to the application a DD214 discharge document or proof of disability and complete/submit the Veteran's Preference Application no later than the closing date of the posting. For more information about this credit please go to the Veteran's Preference Policy and Application link at www.bart.gov/jobs . The San Francisco Bay Area Rapid Transit District (BART) prides itself in offering best in class benefits packages to employees of the District. Currently, the following benefits may be available to employees in this job classification. Highlights Medical Coverage (or $350/month if opted out) Dental Coverage Vision Insurance (Basic and Enhanced Plans Available) Retirement Plan through the CA Public Employees’ Retirement System (CalPERS) 2% @ 55 (Classic Members) 2% @ 62 (PEPRA Members) Reciprocity available for existing members of many other public retirement systems (see BART website and/or CalPERS website for details) Money Purchase Pension Plan (in-lieu of participating in Social Security tax) 6.65% employer contribution up to annual maximum of $1,868.65 Deferred Compensation & Roth 457 Sick Leave Accruals (12 days per year) Vacation Accruals (3-6 weeks based on time worked w/ the District) Holidays: 10 observed holidays and 3 floating holidays Life Insurance w/ ability to obtain additional coverage Accidental Death and Dismemberment (AD&D) Insurance Survivor Benefits through BART Short-Term Disability Insurance Long-Term Disability Insurance Flexible Spending Accounts: Health and Dependent Care Commuter Benefits Free BART Passes for BART employees and eligible family members. Closing Date/Time: 4/19/2024 11:59 PM Pacific
Mar 19, 2024
Full Time
Marketing Statement Ride BART to a satisfying career that lets you both: 1) make a difference to Bay Area residents, and 2) enjoy excellent pay, benefits, and employment stability. BART is looking for people who like to be challenged, work in a fast-paced environment, and have a passion for connecting riders to work, school and other places they need to go. BART offers a competitive salary, comprehensive health benefits, paid time off, and the CalPERS retirement program. Job Summary Pay Rate SEIU Maint Worker III Step 76: $39.48/hour to Step 99: $51.61/hour Starting hourly rate will be $39.48/hour (Step 76) for external candidates Reports To Variable Current Assignment This announcement will be used to establish an eligibility list of qualified candidates. Under general supervision, performs skilled preventive maintenance, troubleshooting, primary and some secondary repair, and modification to a variety of electronic and electro-mechanical equipment and components found in revenue vehicles; performs related work as assigned. Selection Process This is a SEIU Local 1021 Bargaining unit position. However, All SEIU members must follow the "Bid Form Process", failure to comply will invalidate an employee's application. The selection process will include a screening for minimum qualifications as listed in this posting and may additionally involve a skills/performance test, written exam, and/or a panel interview. Outside applicants will not be considered until all employees who have applied have been considered first. Application Process All SEIU Local 1021 members MUST submit their bid forms in the bid box. Failure to comply may invalidate the employee's bid. Current Non-SEIU employees are strongly encouraged to apply online, either at www.bart.gov/jobs, or on WebBART. Current Non-SEIU employees may also apply using a BART paper application by delivering the completed form to the Human Resources Department, or by mailing it to P. O. Box 12688, Oakland, CA 94604-2688. On line or paper applications are considered to provide supplemental information and should not be considered a substitution for the bid form itself. Applications must be complete by the closing date and time listed on the job announcement. Examples of Duties Following a pre-established schedule, performs preventive maintenance, testing and adjustment of electronic and related electro-mechanical systems found on transit vehicles, including those associated with propulsion, train control, brake control, air conditioning, annunciation, communications, door control, lighting, and auxiliary electrical supply. Troubleshoots and performs primary maintenance on such systems, removing and replacing components as required to enable vehicles to be returned to revenue service. Responds to and assesses transit vehicle operating problems in the field. Makes field repairs to vehicles, provides technical information to central operations and maintenance control staff regarding equipment status and safety. Performs major repair of vehicles involved in accidents. Performs modifications to revenue vehicle electronic and electro-mechanical systems, as directed by engineering and supervisory staff. Suggests improvements and works with engineering and other maintenance staff regarding modifications. Uses diagnostic test equipment and precision measuring devices in the course of the work; may fabricate new testing equipment as required for use on new components and systems. Performs secondary dismantling and repair of electronic and electro-mechanical systems. Verifies performance of new or modified systems or equipment. Works closely with transit vehicle mechanics in troubleshooting problems and performing primary repairs. Reads and interprets diagrams, engineering drawings, manuals, schematics and work orders. Measures, tests and inspects completed work to confirm adherence to specifications. Documents work performed and parts and materials used; follows specified safety procedures. Minimum Qualifications Education Associate in Science degree in electronics from an accredited community college or an Electronics Credential from an accredited electronics certificate program, or its equivalent (i.e., completion of a military electronics training program). Substitution Four (4) years of verifiable full-time work experience in electronic maintenance (troubleshooting, repair, and maintenance of electronic and/or electro-mechanical equipment) can be substituted for the education. Other Requirements : Must possess adequate color vision and be physically capable of working in confining workspaces and lifting equipment weighing up to 70 pounds. Must be willing to work weekends, holidays, off hours shifts and occasional emergency overtime. Must be able to climb ladders to perform railcar maintenance work. Knowledge and Skills Knowledge of : Basic operating principles of analog and digital electronics, electrical and electronic circuitry, and associated mechanical mechanisms, methods, equipment and materials used in the primary maintenance and repair of a variety of electronic and electro-mechanical systems, components and equipment. Use and care of testing and power and hand tools of the trade. Troubleshooting and diagnostic techniques. Shop arithmetic as required for the trade. Safety practices pertaining to the work. Skill in : Diagnosing and repairing operational problems in a variety of electronic and electro-mechanical systems, components and equipment. Performing preventive maintenance on and modifications to electronic systems and components. Reading and interpreting engineering drawings, diagrams, manuals and work orders. Using and maintaining hand and power tools and testing equipment of the trade. Understanding and following oral and written directions. Maintaining accurate records of work performed and materials used. Establishing and maintaining effective working relationships with those contacted in the course of the work. Equal Employment Opportunity GroupBox1 The San Francisco Bay Area Rapid Transit District is an equal opportunity employer. Applicants shall not be discriminated against because of race, color, sex, sexual orientation, gender identity, gender expression, age (40 and above), religion, national origin (including language use restrictions), disability (mental and physical, including HIV and AIDS), ancestry, marital status, military status, veteran status, medical condition (cancer/genetic characteristics and information), or any protected category prohibited by local, state or federal laws. The BART Human Resources Department will make reasonable efforts in the examination process to accommodate persons with disabilities or for religious reasons. Please advise the Human Resources Department of any special needs in advance of the examination by emailing at least 5 days before your examination date at employment@bart.gov . Qualified veterans may be eligible to obtain additional veteran's credit in the selection process for this recruitment (effective Jan. 1, 2013). To obtain the credit, veterans must attach to the application a DD214 discharge document or proof of disability and complete/submit the Veteran's Preference Application no later than the closing date of the posting. For more information about this credit please go to the Veteran's Preference Policy and Application link at www.bart.gov/jobs . The San Francisco Bay Area Rapid Transit District (BART) prides itself in offering best in class benefits packages to employees of the District. Currently, the following benefits may be available to employees in this job classification. Highlights Medical Coverage (or $350/month if opted out) Dental Coverage Vision Insurance (Basic and Enhanced Plans Available) Retirement Plan through the CA Public Employees’ Retirement System (CalPERS) 2% @ 55 (Classic Members) 2% @ 62 (PEPRA Members) Reciprocity available for existing members of many other public retirement systems (see BART website and/or CalPERS website for details) Money Purchase Pension Plan (in-lieu of participating in Social Security tax) 6.65% employer contribution up to annual maximum of $1,868.65 Deferred Compensation & Roth 457 Sick Leave Accruals (12 days per year) Vacation Accruals (3-6 weeks based on time worked w/ the District) Holidays: 10 observed holidays and 3 floating holidays Life Insurance w/ ability to obtain additional coverage Accidental Death and Dismemberment (AD&D) Insurance Survivor Benefits through BART Short-Term Disability Insurance Long-Term Disability Insurance Flexible Spending Accounts: Health and Dependent Care Commuter Benefits Free BART Passes for BART employees and eligible family members. Closing Date/Time: 4/19/2024 11:59 PM Pacific
City of Vallejo
Vallejo, California, United States
Description PLEASE READ THIS BULLETIN IN ITS ENTIRETY THE POSITION This recruitment is being conducted to fill two full-time vacancies. The list established by this recruitment may be used to fill future full-time, part-time, limited term, and temporary vacancies for up to one year. The City of Vallejo is seeking candidates for two Instrument Technician positions, as collaborative members of the City's Water Department. Instrument Technicians will be able to effectively, efficiently and safely perform daily inspections, preventive maintenance, calibration, installation, and repair of a variety of instrumentation and electrical equipment. They will have knowledge of installation, maintenance, troubleshooting, repair, and calibration of a large variety of instrumentation and electrical systems, controls and equipment commonly used in large municipal drinking-water treatment plants, pump stations, storage tanks and reservoirs. They will also have knowledge of variable frequency drives, motor control centers, motors, digital and analog instruments, water quality and process control analyzers, high medium, and low voltage equipment, sub stations, co-generation systems, solar and emergency power systems, transfer switches, controls, valve operators, rectifiers, cathodic protection systems, pump control systems, PLC's, SCADA, radio communication and various network systems. Instrument Technician I - Ideal candidates will possess at least one year of experience performing skilled field work in pneumatic, mechanical, electromechanical and electronic circuitry repair, the ability to communicate clearly and concisely, both orally and in writing, and have completed of a two-year formal electrical apprenticeship program and/or training in electronic technology. Instrument Technician II - Ideal candidates will possess at least two years of experience performing skilled field work in pneumatic, mechanical, electromechanical and electronic circuitry repair, the ability to communicate clearly and concisely, both orally and in writing, and have completed of a two-year formal electrical apprenticeship program and/or training in electronic technology. While not required, possession of a California Department of Public Health Distribution Operator D1 or D2 License, California Department of Public Health Treatment Operator License T1 or T2, a California State Division of Industrial Standards Electrician's license, ISA certified Control Systems Technician (CCST) Level II certificate, and a California Water Environment Association Electrical Instrumentation Technician Grade I or II Certification are highly desirable licenses and certifications. THE DEPARTMENT The Vallejo Water Department is a dynamic organization engaged in growth and positive change for the benefit of our customers and community. The Department provides potable water to121,000 customers through a highly complex system including multiple raw water sources, three treatment plants, a Sludge Dewatering Facility, 600 miles of distribution pipes, 8 pressure zones,27 pump stations, and 37,000 service connections. Vallejo Water is a Treatment-5/Distribution-5system. In 2017, Vallejo water services transitioned from a division of Public Works, to a standalone Water Department reporting directly to the City Manager. This change gives drinking water-related operations and issues greater visibility and strategic direction for the benefit of rate-payers. The Water Department's strategic goals include: infrastructure reliability, public trust, sustainability, organizational performance, and financial viability. The Water Department has six Divisions: Water Treatment, Engineering, Distribution, Watershed and Facilities Management, and Administration/Conservation. The Water Quality Division of the Water Department is an important stakeholder in projects unfolding in Vallejo and the Advance Water Treatment Plant Operator is a key member of the team. SALARY Instrument Technician I: Hourly: $36.5503 - $44.4271 | Bi-weekly: $2,924.02 - $3,554.17 | Monthly: $6,335.39 - $7,700.70 | Annually: $76,024.62- $92,408.37 Instrument Technician II : Hourly: $40.5914 - $49.3391 | Bi-weekly: $3,247.31 - $3,947.13 | Monthly: $7,035.84 - $8,552.11 | Annually: $84,430.11 - $102,625.33 THE CITY OF VALLEJO The City of Vallejo is located in Solano County and has a population of approximately 121,000 residents. Vallejo is a rapidly changing, highly diverse community located midway between the cities of San Francisco and Sacramento. It is a friendly, active waterfront community that attracts innovative, hardworking people and takes great pride in its 148-year history and maritime heritage. Residents of Vallejo are situated to take advantage of the best of what the area has to offer. Golf, museums, performing arts, boutique shopping, brewpubs and a wide selection of restaurants are all available in Vallejo. Residents and visitors alike enjoy Vallejo's delightful historical downtown area, weekly downtown farmer's market, and beautifully restored Victorian homes and business facades. Vallejo is also home to Six Flags Discovery Kingdom, one of America's only combination wildlife, oceanarium and theme parks. DISTINGUISHING CHARACTERISTICS: Instrument Technician I - This is the entry level class in the Instrument Technician series. This class is distinguished from the Instrument Technician II by the performance of the more routine tasks and duties assigned to positions within the series including maintenance, repair, replacement, design and calibration of controllers, instrumentation, and equipment as knowledge and experience grow and develop. Since this class is typically used as a training class, employees may have only limited related work experience. This type of experience is typically found in refinery, manufacturing, process control plant, and or college course work related to process instrumentation and industrial electrical/control maintenance and repair. Instrument Technician II - This is the full journey level class within the Instrument Technician series. Employees within this class are distinguished from the Instrument Technician I by the performance of the full range of duties as assigned including all maintenance, repair, replacement, design and calibration of all instruments, controls and equipment used in all City water treatment plants, pumping stations and hydroelectric power plant; and other duties as assigned. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise and are fully aware of the operating procedures and policies of the work unit. Positions in this class are flexibly staffed and are normally filled by advancement from the Instrument Technician I-level when they have demonstrated journey-level knowledge and skills, or when filled from the outside, have prior, directly related experience. SUPERVISION RECEIVED AND EXERCISED: Instrument Technician I - Receives immediate supervision from more experienced staff, supervisory and management staff. Instrument Technician II - Receives general supervision from more experienced staff, supervisory and management staff. May provide functional and technical work direction to less experienced staff. Essential Functions EXAMPLES OF DUTIES The following duties are typical for this classification. Incumbents may not perform all of the listed duties and/or may be required to perform additional or different duties from those set forth below to address business needs and changing business practices. Instrument Technician I - Important responsibilities and duties may include, but are not limited to, the following : Installs, maintains, calibrates, and repairs microcomputer-based data acquisition and control systems, including telemeters, programmable logic controllers, monitoring and process control equipment and instrumentation. Makes inspections and performs periodic preventative maintenance on various control, metering, recording and display equipment; cleans, lubricates, calibrates and/or adjusts equipment as needed. Troubleshoots and diagnoses electronic, electro-mechanical instrumentation malfunctions; completes component level repairs or advises system contractor(s) of other repair requirements as appropriate. Uses software diagnostic routines and tests equipment to verify and/or adjust control system equipment according to manufacturer's recommendations. Installs, maintains and repairs multi-channel system radio and telephone, and calibrates microwave electronic equipment, antennas, battery backup power supplies and grounding systems including connections to existing systems. Reads and interprets wiring schematics, mechanical drawings and specifications as necessary to install, service and/or repair equipment in accordance with related regulations. May make estimates of labor, materials and supplies necessary for the performance of specific assignments. Keeps records and makes verbal and written reports of work performed. Installs, maintains, monitors, overhauls, calibrates and tests a wide variety of electronic recording, indicating, controlling, telemetering and other test instruments including but not limited to programmable logic controllers, communications systems, digital and/or analog instrumentation, printed circuits, magnetic flow meters, differential pressure transducers, multiplex equipment, flow meters, process control equipment, loss-of-head indicators, level indicators, solid state equipment, alarm circuits and systems, pressure and temperature regulators, gauges and recorders, chemical feeder controllers and telemetering receivers and transmitters. Performs other related duties as assigned. Instrument Technician II - In addition to the duties established for Instrument Technician I: May direct the work of other maintenance employees as required; ensures proper adherence to safety precautions. May inspect relevant work performed by contractors installing new electronic equipment in City facilities. Maintain and operate high voltage switch gear. Minimum Qualifications/Knowledge, Skills & Abilities Instrument Technician I Knowledge of: Some familiarity with methods, practices and tools used in maintaining, repairing, testing and calibrating electro-mechanical recording and metering instruments, programmable logic controllers, process control equipment, and mechanical linkage and telemetering systems. General safety practices, precautions and procedures pertaining to the work. Computer based data acquisition and control systems; microwave point to point and point-to-multi-point channel radio data communications equipment; telephone line interface for data communications; software diagnostic routines and test equipment; metering instruments and open and closed loop control systems. Common equipment, tools and materials used in electronic and instrument maintenance and repair. Applied principles of electronic and electrical theory, including Ohm's law; basic D.C. circuit analysis; A.C. circuit analysis; and, applicable mathematics including algebra, geometry and trigonometry as related to specific work applications. Ability to: Learn to diagnose mechanical, electrical and electronic difficulties/malfunctions in instrumentation, programmable logic controllers, control and telemetering systems. Read and interpret wiring schematics, diagrams, mechanical drawings and specifications. Make repairs to electronic, electro mechanical metering and process control instruments. Estimate labor and materials to effect repair or replacement as needed. Keep accurate records and make oral and written reports. Establish and maintain effective working relationships with others. Perform skilled maintenance, calibration and repair of a variety of plant, electronic, and electro-mechanical instrumentation. Lift and carry tools, supplies, and equipment which may exceed 50 pounds. Use a variety of tools, including a variety of test equipment as required. Work independently, efficiently and accountably under general direction. Install metal or PVC electrical conduit. Assist with maintenance of high voltage switch gear. Instrument Technician II In addition to the knowledge and abilities established for Instrument Technician I: Knowledge of: Considerable knowledge of all areas specified under Instrument Technician I sufficient for performing journey-level work. Principles, techniques and operations involved in water treatment and distribution. Ability to: Perform the full range of duties for this class at the journey-level. Direct the work of other employees. Respond to emergency call outs. Experience and Training Guidelines Any combination of experience and training that would likely provide the required knowledge and abilities is qualifying. A typical way to obtain the knowledge and abilities would be: Instrument Technician I Experience: Preferably completion of a formal, two-year electrical apprenticeship program and/or training in electronic technology. OR Some experience performing skilled field work in pneumatic, mechanical, electro mechanical and electronic circuitry repair, at least some of this time having involved work on instrumentation, field and process controls. Training: Completion of the twelfth grade, or its equivalent. License or Certificate: Must possess and maintain a valid, appropriate California driver's license and have a satisfactory driving record. Instrument Technician II Experience: Completion of a two-year formal electrical apprenticeship program and/or training in electronic technology. OR Two years of experience performing skilled field work in pneumatic, mechanical, electro mechanical and electronic circuitry repair, at least some of this time having involved work on instrumentation, field and process controls equivalent to that of an Instrument Technician I with the City of Vallejo. Training: Completion of the twelfth grade, or its equivalent. License or Certificate : Must possess and maintain a valid, appropriate California driver's license and have a satisfactory driving record. *Any license, certification, or registration required for this position shall be maintained (i.e. active and in good standing) at all times during employment with City of Vallejo. For continued employment with City of Vallejo, you must maintain such license, certification, or registration to meet the minimum qualifications of this position. OTHER REQUIREMENTS Must be medically approved for wearing a Self-Contained Breathing Apparatus (SCBA), and remain shaven of facial hair at all times as required to wear respiratory protection equipment. Must maintain the ability to perform required duties while wearing SCBA. Must be able to work safety while wearing Personal Protective Equipment (PPE). Work on an unscheduled basis for emergency situations; must be willing to work any day and any shift within a 24-hour period as assigned, including rotations, holidays, weekends and overtime as needed. Must be able to pass a stringent background check to enter the Travis Air Force Base Water facility. Additional Information SUPPLEMENTAL INFORMATION Working Conditions Must possess physical characteristics to perform the critical and important duties of the class, including sufficient physical agility to work in high or confined spaces. Must be willing to work outdoors in a variety of weather conditions and work overtime as needed. The Recruitment & Selection Process Applications are due by 5:00 P.M. on Friday, April 5, 2024. Applicants must submit a completed City of Vallejo online application, including all responses to the Supplemental Questionnaire (Resume/Cover Letter Optional), by the posted deadline in order to be considered. NOTE: If you have problems creating a user account, obtaining your already created account information, or submitting your online application, please contact governmentjobs.com applicant support directly at 855-524-5627. City of Vallejo staff are unable to assist with these issues. Applications will be screened for overall qualifications the week of April 8, 2024. Applicants who meet the minimum qualifications will have their supplemental responses scored by subject matter experts the week of April 8, 2024. The most qualified applicants from the scoring of the supplemental questions will be invited for an Oral Panel Interview. Oral Panel Interviews are tentatively scheduled to take place the week of April 22, 2024. Oral Panel Interviews are weighted at 100% of the candidates' score. Candidates must achieve a minimum passing score of 70%. Those achieving 70% or higher will be placed on the Register of Eligibles (eligible list) and may be considered to fill positions for up to one year. The City reserves the right to limit the number of candidates to those determined to be best qualified based upon all requested application materials, including training and experience, current resume, and responses to supplemental questions. Candidates placed on the Register of Eligibles (eligible list) will be referred to the department for final interviews based on their performance in the exam. The number of candidates referred for a hiring interview is at the discretion of the hiring department. REASONABLE ACCOMMODATIONS The City of Vallejo is committed to providing reasonable accommodation to applicants as required by the Americans with Disabilities Act (ADA) and the Fair Employment and Housing Act (FEHA). Qualified individuals with disabilities who need a reasonable accommodation during the application, assessment or selection process may contact the Human Resources Department to request an accommodation. Please contact Sukari Dixon at (707) 648-4398 or send an email to: sukari.dixon@cityofvallejo.net no later than April 5, 2024 at 5:00 p.m. PRIOR TO HIRE The selected candidate will be required to: 1) Submit to reference checks 2) Submit to and successfully pass a pre-employment background check, including fingerprint check. 3) Successfully complete a job-related pre-placement medical exam. 4) Provide proof of legal right to work in the United States. Disaster Service Workers - All City of Vallejo ("City") employees are designated Disaster Service Workers ("DSW") by state law (California Government Code Section 3100-3109). Employment with the City requires the affirmation of a loyalty oath to this effect. Employees are required to complete all DSW-related training as assigned and to return to work as ordered in the event of an emergency. Veteran's Preference - Veteran's preference points will be applied in accordance with Civil Service Rule 24. A copy of the DD 214 form must be filed at time of application. Equal Opportunity Employer (EOE ) - The City of Vallejo is an Equal Opportunity Employer. It is the policy of the City of Vallejo to provide equal employment opportunity for all qualified persons. All applicants will be considered without regard to race, color, religion, sex, national origin, age, disability, sexual orientation, gender, gender identity, gender expression, marital status, ancestry, medical condition (cancer and genetic characteristics), genetic information, or denial of medical and family care leave, or any other non-job-related factors. Note: The provisions in this bulletin do not constitute a contract, expressed or implied, and any provisions contained in this bulletin may be modified or revoked without notice. Closing Date/Time: 4/5/2024 5:00 PM Pacific
Mar 09, 2024
Full Time
Description PLEASE READ THIS BULLETIN IN ITS ENTIRETY THE POSITION This recruitment is being conducted to fill two full-time vacancies. The list established by this recruitment may be used to fill future full-time, part-time, limited term, and temporary vacancies for up to one year. The City of Vallejo is seeking candidates for two Instrument Technician positions, as collaborative members of the City's Water Department. Instrument Technicians will be able to effectively, efficiently and safely perform daily inspections, preventive maintenance, calibration, installation, and repair of a variety of instrumentation and electrical equipment. They will have knowledge of installation, maintenance, troubleshooting, repair, and calibration of a large variety of instrumentation and electrical systems, controls and equipment commonly used in large municipal drinking-water treatment plants, pump stations, storage tanks and reservoirs. They will also have knowledge of variable frequency drives, motor control centers, motors, digital and analog instruments, water quality and process control analyzers, high medium, and low voltage equipment, sub stations, co-generation systems, solar and emergency power systems, transfer switches, controls, valve operators, rectifiers, cathodic protection systems, pump control systems, PLC's, SCADA, radio communication and various network systems. Instrument Technician I - Ideal candidates will possess at least one year of experience performing skilled field work in pneumatic, mechanical, electromechanical and electronic circuitry repair, the ability to communicate clearly and concisely, both orally and in writing, and have completed of a two-year formal electrical apprenticeship program and/or training in electronic technology. Instrument Technician II - Ideal candidates will possess at least two years of experience performing skilled field work in pneumatic, mechanical, electromechanical and electronic circuitry repair, the ability to communicate clearly and concisely, both orally and in writing, and have completed of a two-year formal electrical apprenticeship program and/or training in electronic technology. While not required, possession of a California Department of Public Health Distribution Operator D1 or D2 License, California Department of Public Health Treatment Operator License T1 or T2, a California State Division of Industrial Standards Electrician's license, ISA certified Control Systems Technician (CCST) Level II certificate, and a California Water Environment Association Electrical Instrumentation Technician Grade I or II Certification are highly desirable licenses and certifications. THE DEPARTMENT The Vallejo Water Department is a dynamic organization engaged in growth and positive change for the benefit of our customers and community. The Department provides potable water to121,000 customers through a highly complex system including multiple raw water sources, three treatment plants, a Sludge Dewatering Facility, 600 miles of distribution pipes, 8 pressure zones,27 pump stations, and 37,000 service connections. Vallejo Water is a Treatment-5/Distribution-5system. In 2017, Vallejo water services transitioned from a division of Public Works, to a standalone Water Department reporting directly to the City Manager. This change gives drinking water-related operations and issues greater visibility and strategic direction for the benefit of rate-payers. The Water Department's strategic goals include: infrastructure reliability, public trust, sustainability, organizational performance, and financial viability. The Water Department has six Divisions: Water Treatment, Engineering, Distribution, Watershed and Facilities Management, and Administration/Conservation. The Water Quality Division of the Water Department is an important stakeholder in projects unfolding in Vallejo and the Advance Water Treatment Plant Operator is a key member of the team. SALARY Instrument Technician I: Hourly: $36.5503 - $44.4271 | Bi-weekly: $2,924.02 - $3,554.17 | Monthly: $6,335.39 - $7,700.70 | Annually: $76,024.62- $92,408.37 Instrument Technician II : Hourly: $40.5914 - $49.3391 | Bi-weekly: $3,247.31 - $3,947.13 | Monthly: $7,035.84 - $8,552.11 | Annually: $84,430.11 - $102,625.33 THE CITY OF VALLEJO The City of Vallejo is located in Solano County and has a population of approximately 121,000 residents. Vallejo is a rapidly changing, highly diverse community located midway between the cities of San Francisco and Sacramento. It is a friendly, active waterfront community that attracts innovative, hardworking people and takes great pride in its 148-year history and maritime heritage. Residents of Vallejo are situated to take advantage of the best of what the area has to offer. Golf, museums, performing arts, boutique shopping, brewpubs and a wide selection of restaurants are all available in Vallejo. Residents and visitors alike enjoy Vallejo's delightful historical downtown area, weekly downtown farmer's market, and beautifully restored Victorian homes and business facades. Vallejo is also home to Six Flags Discovery Kingdom, one of America's only combination wildlife, oceanarium and theme parks. DISTINGUISHING CHARACTERISTICS: Instrument Technician I - This is the entry level class in the Instrument Technician series. This class is distinguished from the Instrument Technician II by the performance of the more routine tasks and duties assigned to positions within the series including maintenance, repair, replacement, design and calibration of controllers, instrumentation, and equipment as knowledge and experience grow and develop. Since this class is typically used as a training class, employees may have only limited related work experience. This type of experience is typically found in refinery, manufacturing, process control plant, and or college course work related to process instrumentation and industrial electrical/control maintenance and repair. Instrument Technician II - This is the full journey level class within the Instrument Technician series. Employees within this class are distinguished from the Instrument Technician I by the performance of the full range of duties as assigned including all maintenance, repair, replacement, design and calibration of all instruments, controls and equipment used in all City water treatment plants, pumping stations and hydroelectric power plant; and other duties as assigned. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise and are fully aware of the operating procedures and policies of the work unit. Positions in this class are flexibly staffed and are normally filled by advancement from the Instrument Technician I-level when they have demonstrated journey-level knowledge and skills, or when filled from the outside, have prior, directly related experience. SUPERVISION RECEIVED AND EXERCISED: Instrument Technician I - Receives immediate supervision from more experienced staff, supervisory and management staff. Instrument Technician II - Receives general supervision from more experienced staff, supervisory and management staff. May provide functional and technical work direction to less experienced staff. Essential Functions EXAMPLES OF DUTIES The following duties are typical for this classification. Incumbents may not perform all of the listed duties and/or may be required to perform additional or different duties from those set forth below to address business needs and changing business practices. Instrument Technician I - Important responsibilities and duties may include, but are not limited to, the following : Installs, maintains, calibrates, and repairs microcomputer-based data acquisition and control systems, including telemeters, programmable logic controllers, monitoring and process control equipment and instrumentation. Makes inspections and performs periodic preventative maintenance on various control, metering, recording and display equipment; cleans, lubricates, calibrates and/or adjusts equipment as needed. Troubleshoots and diagnoses electronic, electro-mechanical instrumentation malfunctions; completes component level repairs or advises system contractor(s) of other repair requirements as appropriate. Uses software diagnostic routines and tests equipment to verify and/or adjust control system equipment according to manufacturer's recommendations. Installs, maintains and repairs multi-channel system radio and telephone, and calibrates microwave electronic equipment, antennas, battery backup power supplies and grounding systems including connections to existing systems. Reads and interprets wiring schematics, mechanical drawings and specifications as necessary to install, service and/or repair equipment in accordance with related regulations. May make estimates of labor, materials and supplies necessary for the performance of specific assignments. Keeps records and makes verbal and written reports of work performed. Installs, maintains, monitors, overhauls, calibrates and tests a wide variety of electronic recording, indicating, controlling, telemetering and other test instruments including but not limited to programmable logic controllers, communications systems, digital and/or analog instrumentation, printed circuits, magnetic flow meters, differential pressure transducers, multiplex equipment, flow meters, process control equipment, loss-of-head indicators, level indicators, solid state equipment, alarm circuits and systems, pressure and temperature regulators, gauges and recorders, chemical feeder controllers and telemetering receivers and transmitters. Performs other related duties as assigned. Instrument Technician II - In addition to the duties established for Instrument Technician I: May direct the work of other maintenance employees as required; ensures proper adherence to safety precautions. May inspect relevant work performed by contractors installing new electronic equipment in City facilities. Maintain and operate high voltage switch gear. Minimum Qualifications/Knowledge, Skills & Abilities Instrument Technician I Knowledge of: Some familiarity with methods, practices and tools used in maintaining, repairing, testing and calibrating electro-mechanical recording and metering instruments, programmable logic controllers, process control equipment, and mechanical linkage and telemetering systems. General safety practices, precautions and procedures pertaining to the work. Computer based data acquisition and control systems; microwave point to point and point-to-multi-point channel radio data communications equipment; telephone line interface for data communications; software diagnostic routines and test equipment; metering instruments and open and closed loop control systems. Common equipment, tools and materials used in electronic and instrument maintenance and repair. Applied principles of electronic and electrical theory, including Ohm's law; basic D.C. circuit analysis; A.C. circuit analysis; and, applicable mathematics including algebra, geometry and trigonometry as related to specific work applications. Ability to: Learn to diagnose mechanical, electrical and electronic difficulties/malfunctions in instrumentation, programmable logic controllers, control and telemetering systems. Read and interpret wiring schematics, diagrams, mechanical drawings and specifications. Make repairs to electronic, electro mechanical metering and process control instruments. Estimate labor and materials to effect repair or replacement as needed. Keep accurate records and make oral and written reports. Establish and maintain effective working relationships with others. Perform skilled maintenance, calibration and repair of a variety of plant, electronic, and electro-mechanical instrumentation. Lift and carry tools, supplies, and equipment which may exceed 50 pounds. Use a variety of tools, including a variety of test equipment as required. Work independently, efficiently and accountably under general direction. Install metal or PVC electrical conduit. Assist with maintenance of high voltage switch gear. Instrument Technician II In addition to the knowledge and abilities established for Instrument Technician I: Knowledge of: Considerable knowledge of all areas specified under Instrument Technician I sufficient for performing journey-level work. Principles, techniques and operations involved in water treatment and distribution. Ability to: Perform the full range of duties for this class at the journey-level. Direct the work of other employees. Respond to emergency call outs. Experience and Training Guidelines Any combination of experience and training that would likely provide the required knowledge and abilities is qualifying. A typical way to obtain the knowledge and abilities would be: Instrument Technician I Experience: Preferably completion of a formal, two-year electrical apprenticeship program and/or training in electronic technology. OR Some experience performing skilled field work in pneumatic, mechanical, electro mechanical and electronic circuitry repair, at least some of this time having involved work on instrumentation, field and process controls. Training: Completion of the twelfth grade, or its equivalent. License or Certificate: Must possess and maintain a valid, appropriate California driver's license and have a satisfactory driving record. Instrument Technician II Experience: Completion of a two-year formal electrical apprenticeship program and/or training in electronic technology. OR Two years of experience performing skilled field work in pneumatic, mechanical, electro mechanical and electronic circuitry repair, at least some of this time having involved work on instrumentation, field and process controls equivalent to that of an Instrument Technician I with the City of Vallejo. Training: Completion of the twelfth grade, or its equivalent. License or Certificate : Must possess and maintain a valid, appropriate California driver's license and have a satisfactory driving record. *Any license, certification, or registration required for this position shall be maintained (i.e. active and in good standing) at all times during employment with City of Vallejo. For continued employment with City of Vallejo, you must maintain such license, certification, or registration to meet the minimum qualifications of this position. OTHER REQUIREMENTS Must be medically approved for wearing a Self-Contained Breathing Apparatus (SCBA), and remain shaven of facial hair at all times as required to wear respiratory protection equipment. Must maintain the ability to perform required duties while wearing SCBA. Must be able to work safety while wearing Personal Protective Equipment (PPE). Work on an unscheduled basis for emergency situations; must be willing to work any day and any shift within a 24-hour period as assigned, including rotations, holidays, weekends and overtime as needed. Must be able to pass a stringent background check to enter the Travis Air Force Base Water facility. Additional Information SUPPLEMENTAL INFORMATION Working Conditions Must possess physical characteristics to perform the critical and important duties of the class, including sufficient physical agility to work in high or confined spaces. Must be willing to work outdoors in a variety of weather conditions and work overtime as needed. The Recruitment & Selection Process Applications are due by 5:00 P.M. on Friday, April 5, 2024. Applicants must submit a completed City of Vallejo online application, including all responses to the Supplemental Questionnaire (Resume/Cover Letter Optional), by the posted deadline in order to be considered. NOTE: If you have problems creating a user account, obtaining your already created account information, or submitting your online application, please contact governmentjobs.com applicant support directly at 855-524-5627. City of Vallejo staff are unable to assist with these issues. Applications will be screened for overall qualifications the week of April 8, 2024. Applicants who meet the minimum qualifications will have their supplemental responses scored by subject matter experts the week of April 8, 2024. The most qualified applicants from the scoring of the supplemental questions will be invited for an Oral Panel Interview. Oral Panel Interviews are tentatively scheduled to take place the week of April 22, 2024. Oral Panel Interviews are weighted at 100% of the candidates' score. Candidates must achieve a minimum passing score of 70%. Those achieving 70% or higher will be placed on the Register of Eligibles (eligible list) and may be considered to fill positions for up to one year. The City reserves the right to limit the number of candidates to those determined to be best qualified based upon all requested application materials, including training and experience, current resume, and responses to supplemental questions. Candidates placed on the Register of Eligibles (eligible list) will be referred to the department for final interviews based on their performance in the exam. The number of candidates referred for a hiring interview is at the discretion of the hiring department. REASONABLE ACCOMMODATIONS The City of Vallejo is committed to providing reasonable accommodation to applicants as required by the Americans with Disabilities Act (ADA) and the Fair Employment and Housing Act (FEHA). Qualified individuals with disabilities who need a reasonable accommodation during the application, assessment or selection process may contact the Human Resources Department to request an accommodation. Please contact Sukari Dixon at (707) 648-4398 or send an email to: sukari.dixon@cityofvallejo.net no later than April 5, 2024 at 5:00 p.m. PRIOR TO HIRE The selected candidate will be required to: 1) Submit to reference checks 2) Submit to and successfully pass a pre-employment background check, including fingerprint check. 3) Successfully complete a job-related pre-placement medical exam. 4) Provide proof of legal right to work in the United States. Disaster Service Workers - All City of Vallejo ("City") employees are designated Disaster Service Workers ("DSW") by state law (California Government Code Section 3100-3109). Employment with the City requires the affirmation of a loyalty oath to this effect. Employees are required to complete all DSW-related training as assigned and to return to work as ordered in the event of an emergency. Veteran's Preference - Veteran's preference points will be applied in accordance with Civil Service Rule 24. A copy of the DD 214 form must be filed at time of application. Equal Opportunity Employer (EOE ) - The City of Vallejo is an Equal Opportunity Employer. It is the policy of the City of Vallejo to provide equal employment opportunity for all qualified persons. All applicants will be considered without regard to race, color, religion, sex, national origin, age, disability, sexual orientation, gender, gender identity, gender expression, marital status, ancestry, medical condition (cancer and genetic characteristics), genetic information, or denial of medical and family care leave, or any other non-job-related factors. Note: The provisions in this bulletin do not constitute a contract, expressed or implied, and any provisions contained in this bulletin may be modified or revoked without notice. Closing Date/Time: 4/5/2024 5:00 PM Pacific
WAKE COUNTY, NC
Raleigh, North Carolina, United States
What You'll Be Doing The Physical Plant Division of Wake County General Services is looking for applicants that are highly skilled and knowledgeable in the operation, troubleshooting, repairing and assisting others in maintenance of commercial HVAC systems to fill the role of HVAC Senior Technician . Primary Dut ie s: Complete repair, replacement or upgrade to all Wake County facilities heating, ventilation, air conditioning (HVAC), refrigeration, piping systems and related devices Perform preventive HVAC maintenance to maximize uptime and reliability of building infrastructure Assist in performing required testing of HVAC and related systems Complete routine as well as emergency work orders (i.e., Non-Functional HVAC systems, leaky pipes, pump failures, etc.) Complete daily preventive maintenance in all Wake County facilities including high and medium security facilities Maintain and enter information on repairs and requests into Wake County's Computerized Maintenance Management System (CMMS) Oversee outside contractors that bid and perform HVAC related work Use Wake County’s building automation systems to assist with monitoring and troubleshooting HVAC systems Work with engineers on new projects and existing building problems NOTE: A criminal background and credit check will be conducted. About Our Team General Services Administration (GSA) manages Wake County owned and leased facilities, the Wake County fleet, provides criminal justice support and supports a number of General Government business units. GSA is dedicated to ensuring safe, productive work environments and safe, reliable vehicles for our customers. The Basics (Required Education and Experience) High school diploma or GED Two years of experience in HVAC Valid Driver's License and "safe" driving record Equivalent education and experience are accepted Beyond the Basics (Preferred Education and Experience) Experience in building automation systems Graduate of a HVAC technical school How Will We Know You're 'The One'? Strong knowledge base and experience with commercial HVAC systems including chillers, cooling towers, boilers, drives, VAV boxes, pumps and motors Experience in HVAC preventive maintenance and repairs Extensive knowledge of personal computers, including window-based programs, spread sheets and data-based software Working knowledge of plant control strategies and ability to diagnose these systems Knowledge of workplace safety practices and PPE to conform with OSHA requirements Ability to obtain a NC H3 mechanical license About This Position Location: General Services Center Raleigh, NC 27610 Employment Type: Regular Work Schedule: Mon - Fri 7:30am - 4:30pm Hiring Range: $21.33-$28.80 Market Range: 21.33 - 36.27 Posting Closing Date: This position is open until filled and may close at any time. What Makes Wake Great Home to the State Capital, Wake County is one of the fastest growing areas in the nation and the most populous county in the state, with more than 1.1 million residents. The County has received national and international rankings and accolades from publications such as Money, Fortune, and Time magazines as being one of the best places to live, work and play. The central location of the County allows for a short drive to the spectacular mountains or coast. Wake County Government is governed by a seven-member Board of Commissioners, who are elected at-large to serve two-year terms. Wake County Government has a general operating budget of $1.874 billion, employs over 4400 employees, experiences minimal turnover, and is an award-winning leader in wellness and technology initiatives; such as offering employees and covered spouses free access to the Employee Health Center. Wake County Government offers a wide range of training and development opportunities, a stable career in public service with a balance of work and family life, flexible work schedules and a competitive salary and benefits package. Equal Opportunity Statement Wake County provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. Background Check Statement Position may require a background check that may include: criminal, credit, motor vehicle, education, and sexual offender registry or others based on job requirements. Unless required by state law, a record of conviction will not automatically exclude you from consideration for employment. Wake County Government is an Equal Opportunity Employer. Emergency Service Worker Statement In the event of an emergency, as determined by the County Manager or designee, participation in preparedness and response operations should be expected. Employee may be required to fill a temporary assignment in a role different from standard duties, work hours and/or work location in preparation for, during and after the emergency. Employee may also be required to participate in relevant exercises and regular preparedness training.
Mar 08, 2024
What You'll Be Doing The Physical Plant Division of Wake County General Services is looking for applicants that are highly skilled and knowledgeable in the operation, troubleshooting, repairing and assisting others in maintenance of commercial HVAC systems to fill the role of HVAC Senior Technician . Primary Dut ie s: Complete repair, replacement or upgrade to all Wake County facilities heating, ventilation, air conditioning (HVAC), refrigeration, piping systems and related devices Perform preventive HVAC maintenance to maximize uptime and reliability of building infrastructure Assist in performing required testing of HVAC and related systems Complete routine as well as emergency work orders (i.e., Non-Functional HVAC systems, leaky pipes, pump failures, etc.) Complete daily preventive maintenance in all Wake County facilities including high and medium security facilities Maintain and enter information on repairs and requests into Wake County's Computerized Maintenance Management System (CMMS) Oversee outside contractors that bid and perform HVAC related work Use Wake County’s building automation systems to assist with monitoring and troubleshooting HVAC systems Work with engineers on new projects and existing building problems NOTE: A criminal background and credit check will be conducted. About Our Team General Services Administration (GSA) manages Wake County owned and leased facilities, the Wake County fleet, provides criminal justice support and supports a number of General Government business units. GSA is dedicated to ensuring safe, productive work environments and safe, reliable vehicles for our customers. The Basics (Required Education and Experience) High school diploma or GED Two years of experience in HVAC Valid Driver's License and "safe" driving record Equivalent education and experience are accepted Beyond the Basics (Preferred Education and Experience) Experience in building automation systems Graduate of a HVAC technical school How Will We Know You're 'The One'? Strong knowledge base and experience with commercial HVAC systems including chillers, cooling towers, boilers, drives, VAV boxes, pumps and motors Experience in HVAC preventive maintenance and repairs Extensive knowledge of personal computers, including window-based programs, spread sheets and data-based software Working knowledge of plant control strategies and ability to diagnose these systems Knowledge of workplace safety practices and PPE to conform with OSHA requirements Ability to obtain a NC H3 mechanical license About This Position Location: General Services Center Raleigh, NC 27610 Employment Type: Regular Work Schedule: Mon - Fri 7:30am - 4:30pm Hiring Range: $21.33-$28.80 Market Range: 21.33 - 36.27 Posting Closing Date: This position is open until filled and may close at any time. What Makes Wake Great Home to the State Capital, Wake County is one of the fastest growing areas in the nation and the most populous county in the state, with more than 1.1 million residents. The County has received national and international rankings and accolades from publications such as Money, Fortune, and Time magazines as being one of the best places to live, work and play. The central location of the County allows for a short drive to the spectacular mountains or coast. Wake County Government is governed by a seven-member Board of Commissioners, who are elected at-large to serve two-year terms. Wake County Government has a general operating budget of $1.874 billion, employs over 4400 employees, experiences minimal turnover, and is an award-winning leader in wellness and technology initiatives; such as offering employees and covered spouses free access to the Employee Health Center. Wake County Government offers a wide range of training and development opportunities, a stable career in public service with a balance of work and family life, flexible work schedules and a competitive salary and benefits package. Equal Opportunity Statement Wake County provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. Background Check Statement Position may require a background check that may include: criminal, credit, motor vehicle, education, and sexual offender registry or others based on job requirements. Unless required by state law, a record of conviction will not automatically exclude you from consideration for employment. Wake County Government is an Equal Opportunity Employer. Emergency Service Worker Statement In the event of an emergency, as determined by the County Manager or designee, participation in preparedness and response operations should be expected. Employee may be required to fill a temporary assignment in a role different from standard duties, work hours and/or work location in preparation for, during and after the emergency. Employee may also be required to participate in relevant exercises and regular preparedness training.
City of McKinney, TX
McKinney, Texas, United States
Summary WORKING FOR THE CITY OF MCKINNEY Working for the City of McKinney is more than a job. It is an opportunity to make a meaningful difference in the lives of others. It is also an opportunity to have a hand in the development of one of the fastest growing communities in the nation. In 2014, our community was named “The #1 Best Place to Live in America.” Although proud of that honor, everyone on our team is committed to making McKinney an even better place to live, work and raise a family. That’s why we exist. OUR CORE VALUES City of McKinney employees work hard and at a very fast pace. However, we also look after and support one another. All of us are guided by four employee-inspired values - Respect, Integrity, Service, and Excellence (RISE). We are also supported by servant-based leaders who foster and support a healthy, family-oriented culture. All new employees are expected to embrace and live by our core values and commit to helping us sustain our exceptional work environment as a high performance organization (HPO). SUMMARY OF POSITION Under general supervision, the Facilities Maintenance Mechanic II is responsible for performing general maintenance and repair of assigned City owned or leased buildings and facilities. This is a journey-level classification in the Facilities Maintenance Mechanical series that follows diversified procedures and implements processes to accomplish end results, within guidelines. Immediate supervision is available upon request. This class is distinguished from Facilities Maintenance Mechanic Senior in that the latter is a higher-level class in the series that performs complex technical, investigative, and supervisory duties requiring a higher level of knowledge and skill. Essential Functions/Knowledge, Skills, & Abilities GENERAL EXPECTATIONS FOR ALL EMPLOYEES In order for us to continue to achieve our primary function of making McKinney a better place to live, work, and raise a family, we hold these expectations for all employees. Learn and demonstrate an understanding of how team, department, and City goals are interconnected. Contribute to a positive work culture. Maintain regular and reliable attendance. Ability to assess his/her work performance or the work performance of the team. Contribute to the development of others and/or the working unit or overall organization. Ability and willingness to work as part of a team, to demonstrate team skills, and to perform a fair share of team responsibilities. Ability to continuously learn and develop through a mix of internal and external training opportunities, and if applicable, encourage subordinates to do the same. ESSENTIAL DUTIES AND RESPONSIBILITIES Performs general maintenance and repair of assigned facilities, including plumbing repair and installation, carpentry, minor electrical repair and maintenance, minor repair and maintenance of heating, ventilation and air conditioning (HVAC) systems, furniture repair, painting, appliance repair and installation and locksmith. Provides assistance to the electrician or HVAC technician with required installation, maintenance or repair of equipment. Completes general construction and remodeling work. Inspects construction work. Perform scheduled preventive maintenance services at City facilities. Maintain records of work activities and supplies, parts and materials used. May assist in obtaining bids and entering information into computer system. Diagnose defective operations and excessive wear of mechanical equipment. Identify abnormal readings or trends in data collected from gauges, meters, dials, and instruments. Apply standard knowledge of various building trades, identify potential safety hazards & recommend solutions. When assigned to Parking Lot Paint parking striping and maintain clear delineation of parking spaces. Paint fire lanes, handicap decals, and other required markings. Keep the parking lots and surrounding areas clean and free of debris through regular trash pickup. Perform grass and weed care in grassy area adjacent to parking lots. Maintain parking lot pole lighting, including changing ballasts, replacing bulbs, and painting poles. Address lighting issues promptly, sometimes requiring the replacement of the entire pole or fixture. Handle wall mount building lighting maintenance as needed. Safely operate scissor lift and reach lift to perform duties in elevated areas. Ensure proper functionality and aesthetic appeal by regularly maintaining bollards and wheel stops. Regularly inspect, maintain, and clean areas in and around dumpster enclosures. Ensure electric car chargers are in working condition and address any malfunctions. Fill in potholes and repair damaged areas of the parking lots. Oversee and manage contract work, acquiring quotes, and ensure quality work within budget constraints. Collaborate with city purchasing and finance department for procurement and contract-related activities. Keep track of work orders including labor equipment and material within Cityworks. OTHER JOB FUNCTIONS: Will be required to work on-call. Perform other duties as assigned or directed. KNOWLEDGE, SKILLS, ABILITIES, AND BEHAVIORS Ability to embrace and embody the City’s core values of Respect, Integrity, Service, and Excellence (R.I.S.E.). Ability to communicate effectively with peers, supervisors, subordinates, and people to whom service is provided. Ability to produce desired work outcomes, including quality, quantity, and timeliness. Ability to plan and organize work, time, and resources, and if applicable, that of subordinates. Requires technical education, certifications, licenses, previous job experience to perform the essential duties and responsibilities with minimal supervision i.e. electrical maintenance, HVAC repairs, appliance repairs, etc. Requires the ability provide guidance, assistance, and/or interpretation to others on how to apply procedures and standards to specific situations. Requires the ability to operate, maneuver and/or control the actions of equipment, machinery, tools, and/or materials used in performing essential functions. Requires the ability to utilize a wide variety of descriptive data and information, such as electrical diagrams, work orders, policy manuals, and equipment instructions. Requires ability to carry out instructions furnished in written, oral, or diagrammatic form. Involves semi-routine standardized work with some latitude for independent judgment concerning choices of action. Requires the ability to exercise the judgment required in situations characterized by repetitive or short cycle operations covered by set procedures or sequences. Requires the ability to perform coordinated movements involving placing and turning motions, such as operating a tractor, drill press, handheld radio, table saw, and computer terminal. Basic knowledge of data entry, MS word, & MS excel, the ability to learn the current Work Order System (Cityworks) and the ability to learn the Tracer Summit HVAC Control System. Knowledge of routine construction, maintenance, and repair methods; painting methods and materials. Knowledge of electrical codes applicable to the installation, maintenance and repair of electrical circuits and wiring systems. Routine maintenance and repair methods of heating ventilation and air conditioning systems. Completing preventive and minor maintenance and repair on buildings and equipment. Ability to work in a stressful environment. Build professional relationships with internal staff and customers. Offer flexibility and adaptability, especially during times of change. Required Qualifications MINIMUM QUALIFICATIONS Any work related experience resulting in acceptable proficiency levels in the below Minimum Qualifications may be an acceptable substitute for the below specified education and experience requirements. High school diploma or GED equivalent supplemented by two (2) years of experience in general maintenance and repair of buildings and facilities. CONDITIONS OF EMPLOYMENT Must have Class C Texas Driver’s License. Must pass a drug screen and background check. Periodic CJIS background check. Must possess CFC Reclamation and Recycling License Type I and II, and Mobile air conditioning, or ability to obtain within six (6) months from hire date. May require additional technical education, certification and license upon appointment. Physical Demands/Supplemental PHYSICAL DEMANDS Tasks involve the ability to exert heavy physical effort in heavy work, with greater emphasis on climbing and balancing, but typically also involving some combination of stooping, kneeling, crouching, and crawling, and the lifting, carrying, pushing, and/or pulling of moderately heavy objects and materials (20-50 pounds); may occasionally involve heavier objects and materials (up to 100 pounds). Some tasks require visual and odor perception and discrimination. WORK ENVIRONMENT Tasks may risk exposure to extreme cold/heat or extreme weather conditions, strong odors or smoke, dust or pollen, and toxic chemicals. The above statements describe the general nature and level of work being performed as of the date of preparation and approval. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of the position. Employees holding this position will be required to perform any other job-related duties as requested by management. The job description does not constitute an employment agreement between the employer and employee, and all requirements are subject to possible modification to reasonably accommodate individuals with disabilities. The City of McKinney is an equal opportunity employer (EOE) committed to an alcohol / drug free workplace and to providing equal opportunities regardless of age, race, color, gender, religion, national origin, marital status, veteran status, disability or any other legally protected status. The City offers a full complement of benefits: Health Insurance Medical, Dental, Vision Insurance Health Savings Account (HSA), Flexible Spending Medical and Childcare Account (FSA) Mental Health Care and Employee Assistance Program (EAP) City-paid and VoluntaryLifeInsurance City-paid and VoluntaryLong Term Disability Insurance Supplemental Insurance through Aflac Additional Benefits Legal Services through Legal Shield Tuition Reimbursement (up to $10,000 per year) Wellness Program (earn up to $600 per year) Retirement Texas Municipal Retirement System (TMRS) Mandatory 7% employee contribution City match 2:1 5 year vesting Retire after 20 years of service, or age 60 with 5 years of service 457(b) Deferred Compensation Plans Paid Time Off (PTO) Paid Vacation (80 hours per year for new hires; tieredincreases after 2 yrs) Sick Leave (135 hours per year for yourself and immediate family) Paid Parental Leave (80 hours for birth, adoption, or placement of a child in foser care) Ten Paid Holidays Personal Day Optional compensatory time for hourly employees Compensatory time for salaried employees For more detailed information, please see the City of McKinney's summary of benefits . Closing Date/Time: 4/27/2024 5:00 PM Central
Mar 28, 2024
Full Time
Summary WORKING FOR THE CITY OF MCKINNEY Working for the City of McKinney is more than a job. It is an opportunity to make a meaningful difference in the lives of others. It is also an opportunity to have a hand in the development of one of the fastest growing communities in the nation. In 2014, our community was named “The #1 Best Place to Live in America.” Although proud of that honor, everyone on our team is committed to making McKinney an even better place to live, work and raise a family. That’s why we exist. OUR CORE VALUES City of McKinney employees work hard and at a very fast pace. However, we also look after and support one another. All of us are guided by four employee-inspired values - Respect, Integrity, Service, and Excellence (RISE). We are also supported by servant-based leaders who foster and support a healthy, family-oriented culture. All new employees are expected to embrace and live by our core values and commit to helping us sustain our exceptional work environment as a high performance organization (HPO). SUMMARY OF POSITION Under general supervision, the Facilities Maintenance Mechanic II is responsible for performing general maintenance and repair of assigned City owned or leased buildings and facilities. This is a journey-level classification in the Facilities Maintenance Mechanical series that follows diversified procedures and implements processes to accomplish end results, within guidelines. Immediate supervision is available upon request. This class is distinguished from Facilities Maintenance Mechanic Senior in that the latter is a higher-level class in the series that performs complex technical, investigative, and supervisory duties requiring a higher level of knowledge and skill. Essential Functions/Knowledge, Skills, & Abilities GENERAL EXPECTATIONS FOR ALL EMPLOYEES In order for us to continue to achieve our primary function of making McKinney a better place to live, work, and raise a family, we hold these expectations for all employees. Learn and demonstrate an understanding of how team, department, and City goals are interconnected. Contribute to a positive work culture. Maintain regular and reliable attendance. Ability to assess his/her work performance or the work performance of the team. Contribute to the development of others and/or the working unit or overall organization. Ability and willingness to work as part of a team, to demonstrate team skills, and to perform a fair share of team responsibilities. Ability to continuously learn and develop through a mix of internal and external training opportunities, and if applicable, encourage subordinates to do the same. ESSENTIAL DUTIES AND RESPONSIBILITIES Performs general maintenance and repair of assigned facilities, including plumbing repair and installation, carpentry, minor electrical repair and maintenance, minor repair and maintenance of heating, ventilation and air conditioning (HVAC) systems, furniture repair, painting, appliance repair and installation and locksmith. Provides assistance to the electrician or HVAC technician with required installation, maintenance or repair of equipment. Completes general construction and remodeling work. Inspects construction work. Perform scheduled preventive maintenance services at City facilities. Maintain records of work activities and supplies, parts and materials used. May assist in obtaining bids and entering information into computer system. Diagnose defective operations and excessive wear of mechanical equipment. Identify abnormal readings or trends in data collected from gauges, meters, dials, and instruments. Apply standard knowledge of various building trades, identify potential safety hazards & recommend solutions. When assigned to Parking Lot Paint parking striping and maintain clear delineation of parking spaces. Paint fire lanes, handicap decals, and other required markings. Keep the parking lots and surrounding areas clean and free of debris through regular trash pickup. Perform grass and weed care in grassy area adjacent to parking lots. Maintain parking lot pole lighting, including changing ballasts, replacing bulbs, and painting poles. Address lighting issues promptly, sometimes requiring the replacement of the entire pole or fixture. Handle wall mount building lighting maintenance as needed. Safely operate scissor lift and reach lift to perform duties in elevated areas. Ensure proper functionality and aesthetic appeal by regularly maintaining bollards and wheel stops. Regularly inspect, maintain, and clean areas in and around dumpster enclosures. Ensure electric car chargers are in working condition and address any malfunctions. Fill in potholes and repair damaged areas of the parking lots. Oversee and manage contract work, acquiring quotes, and ensure quality work within budget constraints. Collaborate with city purchasing and finance department for procurement and contract-related activities. Keep track of work orders including labor equipment and material within Cityworks. OTHER JOB FUNCTIONS: Will be required to work on-call. Perform other duties as assigned or directed. KNOWLEDGE, SKILLS, ABILITIES, AND BEHAVIORS Ability to embrace and embody the City’s core values of Respect, Integrity, Service, and Excellence (R.I.S.E.). Ability to communicate effectively with peers, supervisors, subordinates, and people to whom service is provided. Ability to produce desired work outcomes, including quality, quantity, and timeliness. Ability to plan and organize work, time, and resources, and if applicable, that of subordinates. Requires technical education, certifications, licenses, previous job experience to perform the essential duties and responsibilities with minimal supervision i.e. electrical maintenance, HVAC repairs, appliance repairs, etc. Requires the ability provide guidance, assistance, and/or interpretation to others on how to apply procedures and standards to specific situations. Requires the ability to operate, maneuver and/or control the actions of equipment, machinery, tools, and/or materials used in performing essential functions. Requires the ability to utilize a wide variety of descriptive data and information, such as electrical diagrams, work orders, policy manuals, and equipment instructions. Requires ability to carry out instructions furnished in written, oral, or diagrammatic form. Involves semi-routine standardized work with some latitude for independent judgment concerning choices of action. Requires the ability to exercise the judgment required in situations characterized by repetitive or short cycle operations covered by set procedures or sequences. Requires the ability to perform coordinated movements involving placing and turning motions, such as operating a tractor, drill press, handheld radio, table saw, and computer terminal. Basic knowledge of data entry, MS word, & MS excel, the ability to learn the current Work Order System (Cityworks) and the ability to learn the Tracer Summit HVAC Control System. Knowledge of routine construction, maintenance, and repair methods; painting methods and materials. Knowledge of electrical codes applicable to the installation, maintenance and repair of electrical circuits and wiring systems. Routine maintenance and repair methods of heating ventilation and air conditioning systems. Completing preventive and minor maintenance and repair on buildings and equipment. Ability to work in a stressful environment. Build professional relationships with internal staff and customers. Offer flexibility and adaptability, especially during times of change. Required Qualifications MINIMUM QUALIFICATIONS Any work related experience resulting in acceptable proficiency levels in the below Minimum Qualifications may be an acceptable substitute for the below specified education and experience requirements. High school diploma or GED equivalent supplemented by two (2) years of experience in general maintenance and repair of buildings and facilities. CONDITIONS OF EMPLOYMENT Must have Class C Texas Driver’s License. Must pass a drug screen and background check. Periodic CJIS background check. Must possess CFC Reclamation and Recycling License Type I and II, and Mobile air conditioning, or ability to obtain within six (6) months from hire date. May require additional technical education, certification and license upon appointment. Physical Demands/Supplemental PHYSICAL DEMANDS Tasks involve the ability to exert heavy physical effort in heavy work, with greater emphasis on climbing and balancing, but typically also involving some combination of stooping, kneeling, crouching, and crawling, and the lifting, carrying, pushing, and/or pulling of moderately heavy objects and materials (20-50 pounds); may occasionally involve heavier objects and materials (up to 100 pounds). Some tasks require visual and odor perception and discrimination. WORK ENVIRONMENT Tasks may risk exposure to extreme cold/heat or extreme weather conditions, strong odors or smoke, dust or pollen, and toxic chemicals. The above statements describe the general nature and level of work being performed as of the date of preparation and approval. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of the position. Employees holding this position will be required to perform any other job-related duties as requested by management. The job description does not constitute an employment agreement between the employer and employee, and all requirements are subject to possible modification to reasonably accommodate individuals with disabilities. The City of McKinney is an equal opportunity employer (EOE) committed to an alcohol / drug free workplace and to providing equal opportunities regardless of age, race, color, gender, religion, national origin, marital status, veteran status, disability or any other legally protected status. The City offers a full complement of benefits: Health Insurance Medical, Dental, Vision Insurance Health Savings Account (HSA), Flexible Spending Medical and Childcare Account (FSA) Mental Health Care and Employee Assistance Program (EAP) City-paid and VoluntaryLifeInsurance City-paid and VoluntaryLong Term Disability Insurance Supplemental Insurance through Aflac Additional Benefits Legal Services through Legal Shield Tuition Reimbursement (up to $10,000 per year) Wellness Program (earn up to $600 per year) Retirement Texas Municipal Retirement System (TMRS) Mandatory 7% employee contribution City match 2:1 5 year vesting Retire after 20 years of service, or age 60 with 5 years of service 457(b) Deferred Compensation Plans Paid Time Off (PTO) Paid Vacation (80 hours per year for new hires; tieredincreases after 2 yrs) Sick Leave (135 hours per year for yourself and immediate family) Paid Parental Leave (80 hours for birth, adoption, or placement of a child in foser care) Ten Paid Holidays Personal Day Optional compensatory time for hourly employees Compensatory time for salaried employees For more detailed information, please see the City of McKinney's summary of benefits . Closing Date/Time: 4/27/2024 5:00 PM Central
Minimum Qualifications Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent plus four (4) years of experience in a related field. Experience may substitute for education up to a maximum of four (4) years. Completion of an accredited automotive, diesel or related certification program may substitute for required experience up to a maximum of six (6) months. An Associate’s degree from an accredited college or university in a related field may substitute for experience, up to a maximum of two (2) years. Licenses or Certifications: Requires a Class “C” driver’s license. If required, must obtain an appropriate Commercial Driver’s License ( CDL ) within ninety (90) days of employment with the City. If applicable, must be licensed within six (6) months of employment as a Texas State Vehicle Inspector in accordance with Texas Department of Public Safety procedures and regulations. Must be certified within six (6) months of employment with respect to EPA standards in air conditioning service, repairs, and Freon recovery, including Freon recovery equipment operations. Physical Requirements: Essential duties are performed in a service center environment with exposure to a variety of motorized equipment, spare parts, tools, oil and lubrication, corrosive liquids, and other potentially hazardous materials. Incumbent may be exposed to loud noise, warm and cold conditions, standing for long periods, frequent stooping and bending, and lift up to fifty (50) pounds. Individuals will need to have good eye-and-hand coordination and read and write in dimly-lit conditions. Equipment Hand Tool Requirements: An incumbent must provide his or her own hand tools, including wrenches, sockets, ratchets, toolbox, etc., as a condition of employment. The individual must meet the minimum hand tool requirements within six (6) months of employment. Notes to Applicants This posting will be used to fill vacancies at locations based upon operational needs. Please note when the same or an additional vacancy occurs within a department in the same job title within 90 days after the start date of the top candidate, the hiring department may offer the additional position to another top candidate from the same candidate pool; or, advertise for the new position. A detailed and complete job application is REQUIRED and helps us to better evaluate your qualifications. In completing your job application, please be sure to provide a COMPLETE employment history regarding any and all relevant work experience that you would like for us to consider. Please be thorough in completing the employment application and list all experience and education that is relevant to this position. For each position, please describe your specific experience as it relates to the minimum and preferred qualifications. This information will also be used to determine salary in the event that you are selected for this position. The location and work schedule of this position may include day and evening hours, weekends and holidays as well as being on a rotational On-Call schedule that may require the technician to return to work and or perform repairs in the field. This position is considered an essential position, which means it is expected that an employee comes to work during any City Closure or emergency to include bad weather and any other unexpected events or shutdowns. Read the Supplemental Questions in full. When completing the Supplemental Questions, please note that your answers to the supplemental questions must be supported by information contained in your application. Driving Requirement: This position requires a Class “C” Driver’s License or the ability to acquire one by your hire date. External New Hires must meet the City of Austin’s Driver Record Evaluation ( DRE ) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. This position may require a skills assessment. Note that position’s location and schedule is subject to change based upon business needs. Applicants are encouraged to apply as soon as possible. The department reserves the right to close the posting after 7 calendar days. A resume and cover letter are not being accepted for this position. Working with the City of Austin provides a number of benefits including medical, paid leave time, a great retirement plan, training opportunities and more! Click HERE for more information. Pay Range $26.26 - $31.45 Hours Work schedules generally fall into the following shifts: 1st Shift - 5:30 a.m. to 2 p.m. 2nd shift - 10:00 a.m. - 7 p.m. Various work shifts available. Note: Locations and Schedule may change based upon operational needs. Job Close Date 04/03/2024 Type of Posting External Department Fleet Mobility Services Regular/Temporary Regular Grant Funded or Pooled Position Not Applicable Category Technical Location Various locations in Austin area Preferred Qualifications Preferred Experience; Experience maintaining and repairing heavy duty refuse (garbage collection) vehicles Experience maintaining and repairing diesel fuel vehicles Experience maintaining and repairing hydraulic equipment Experience maintaining and repairing alternative fuel vehicles and/or equipment ASE certification(s) or the ability to obtain within six (6) months of employment Duties, Functions and Responsibilities Essential duties and functions, pursuant to the Americans with Disabilities Act, may include the following. Other related duties may be assigned. Performs complex gasoline and diesel engine tune-ups and overhauls. Performs specialized work and repairs on engines, carburetors, transmissions, hydraulic systems, electrical systems, and other complex vehicle components. Repairs heavy equipment specifically serviced by the service center. Disassembles, repairs, services, reassembles, and reinstalls vehicle accessories and systems, including brakes, transmissions, hydraulic or pneumatic systems, cooling systems and radiators, air conditioning, suspension, vehicle generators, carburetors and fuel injection, starters, and pumps. Performs wheel alignments on all types of heavy equipment, such as crawler loaders, backhoes and bulldozers. Operates and uses acetylene torch to repair equipment. Records maintenance and service data on designated forms. Performs preventive maintenance, as required. Responsibilities - Supervision and/or Leadership Exercised: May provide leadership, work assignments, evaluations, training and guidance to others. Knowledge, Skills and Abilities Must possess required knowledge, skills, abilities, and experience and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed. Knowledge of methods, systems and components, and materials used in repair and servicing of vehicles and other equipment including, motorized heavy equipment and trailers. Knowledge of various specialized types of vehicles diagnostic testing and analysis equipment and tools used in vehicle repair and maintenance. Knowledge of fleet operations and services. Knowledge of tasks such as work team concepts and productivity techniques, safety practices, City policy and procedure and other operational requirements. Skill in oral and written communication. Ability to read and comprehend technical manuals. Ability to interact with tact and courtesy and maintain a professional demeanor. Ability to establish and maintain good working relationships with other city employees and the public. Criminal Background Investigation This position does not require a Criminal Background Investigation EEO/ADA City of Austin is committed to compliance with the Americans with Disabilities Act. If you require reasonable accommodation during the application process or have a question regarding an essential job function, please call (512) 974-3210 or Texas Relay by dialing 7-1-1. The City of Austin will not discriminate against any applicant or employee based on race, creed, color, national origin, sex, gender identity, age, religion, veteran status, disability, or sexual orientation. In addition, the City will not discriminate in employment decisions on the basis of an individual’s AIDS , AIDS Related Complex, or HIV status; nor will the City discriminate against individuals who are perceived to be at risk of HIV infection, or who associate with individuals who are believed to be at risk. Information For City Employees: If you are an employee within the department, are in good standing and meet both the minimum and preferred qualifications, then you will receive an initial interview. Supplemental Questions Required fields are indicated with an asterisk (*). The minimum qualifications for the Fleet Equipment Technician III is a graduation from an accredited high school or equivalent plus four (4) years of experience in a related field. Experience may substitute for education up to a maximum of four (4) years. Completion of an accredited automotive, diesel or related certification program may substitute for required experience up to a maximum of six (6) months. An Associate’s degree from an accredited college or university in a related field may substitute for experience, up to a maximum of two (2) years. Licenses and Certifications Required: Requires a Class "C" driver's license. If required, must obtain an appropriate Commercial Driver's License (CDL) within ninety (90) days of employment with the City. If applicable, must be licensed within six (6) months of employment as a Texas State Vehicle Inspector in accordance with Texas Department of Public Safety procedures and regulations. Must be certified within six (6) months of employment with respect to EPA standards in air conditioning service, repairs, and Freon recovery, including Freon recovery equipment operations. Equipment Hand Tool Requirements An incumbent must provide his or her own hand tools, including wrenches, sockets, ratchets, toolbox, etc., as a condition of employment. The individual must meet the minimum hand tool requirements within six (6) months of employment. Physical Requirements: Essential duties are performed in a service center environment with exposure to a variety of motorized equipment, spare parts, tools, oil and lubrication, corrosive liquids, and other potentially hazardous materials. Incumbent may be exposed to loud noise, warm and cold conditions, standing for long periods, frequent stooping and bending, and lift up to fifty (50) pounds. Individuals will need to have good eye-and-hand coordination and read and write in dimly-lit conditions. Do you meet these minimum qualifications? Yes No This position requires a Class "C" Driver License. Do you have a Class "C" Driver License or if selected for this position, do you have the ability to acquire a Class "C" Driver License by your hire date? Yes No Which of the following best describes the level of driver license you possess? Class A CDL Class B CDL Texas Class C Operator License Out of State Driver License No Driver License but ability to obtain a Texas Class C or above by date of hire None The City of Austin Driver Eligibility Standards require that External New Hires meet the City’s Driver Record Evaluation (DRE) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. Do you meet this requirement? Yes No Which of the following best describes your level with a Texas State Vehicle Inspector's License? Have Texas State Inspector's License Do not have Texas State Inspector's License but have the ability to obtain the license within six (6) months of employment Do not have Texas State Inspector's License and do not have the ability to obtain the license within six (6) months of employment Optional & Required Documents Required Documents Optional Documents
Mar 28, 2024
Full Time
Minimum Qualifications Education and/or Equivalent Experience: Graduation from an accredited high school or equivalent plus four (4) years of experience in a related field. Experience may substitute for education up to a maximum of four (4) years. Completion of an accredited automotive, diesel or related certification program may substitute for required experience up to a maximum of six (6) months. An Associate’s degree from an accredited college or university in a related field may substitute for experience, up to a maximum of two (2) years. Licenses or Certifications: Requires a Class “C” driver’s license. If required, must obtain an appropriate Commercial Driver’s License ( CDL ) within ninety (90) days of employment with the City. If applicable, must be licensed within six (6) months of employment as a Texas State Vehicle Inspector in accordance with Texas Department of Public Safety procedures and regulations. Must be certified within six (6) months of employment with respect to EPA standards in air conditioning service, repairs, and Freon recovery, including Freon recovery equipment operations. Physical Requirements: Essential duties are performed in a service center environment with exposure to a variety of motorized equipment, spare parts, tools, oil and lubrication, corrosive liquids, and other potentially hazardous materials. Incumbent may be exposed to loud noise, warm and cold conditions, standing for long periods, frequent stooping and bending, and lift up to fifty (50) pounds. Individuals will need to have good eye-and-hand coordination and read and write in dimly-lit conditions. Equipment Hand Tool Requirements: An incumbent must provide his or her own hand tools, including wrenches, sockets, ratchets, toolbox, etc., as a condition of employment. The individual must meet the minimum hand tool requirements within six (6) months of employment. Notes to Applicants This posting will be used to fill vacancies at locations based upon operational needs. Please note when the same or an additional vacancy occurs within a department in the same job title within 90 days after the start date of the top candidate, the hiring department may offer the additional position to another top candidate from the same candidate pool; or, advertise for the new position. A detailed and complete job application is REQUIRED and helps us to better evaluate your qualifications. In completing your job application, please be sure to provide a COMPLETE employment history regarding any and all relevant work experience that you would like for us to consider. Please be thorough in completing the employment application and list all experience and education that is relevant to this position. For each position, please describe your specific experience as it relates to the minimum and preferred qualifications. This information will also be used to determine salary in the event that you are selected for this position. The location and work schedule of this position may include day and evening hours, weekends and holidays as well as being on a rotational On-Call schedule that may require the technician to return to work and or perform repairs in the field. This position is considered an essential position, which means it is expected that an employee comes to work during any City Closure or emergency to include bad weather and any other unexpected events or shutdowns. Read the Supplemental Questions in full. When completing the Supplemental Questions, please note that your answers to the supplemental questions must be supported by information contained in your application. Driving Requirement: This position requires a Class “C” Driver’s License or the ability to acquire one by your hire date. External New Hires must meet the City of Austin’s Driver Record Evaluation ( DRE ) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. This position may require a skills assessment. Note that position’s location and schedule is subject to change based upon business needs. Applicants are encouraged to apply as soon as possible. The department reserves the right to close the posting after 7 calendar days. A resume and cover letter are not being accepted for this position. Working with the City of Austin provides a number of benefits including medical, paid leave time, a great retirement plan, training opportunities and more! Click HERE for more information. Pay Range $26.26 - $31.45 Hours Work schedules generally fall into the following shifts: 1st Shift - 5:30 a.m. to 2 p.m. 2nd shift - 10:00 a.m. - 7 p.m. Various work shifts available. Note: Locations and Schedule may change based upon operational needs. Job Close Date 04/03/2024 Type of Posting External Department Fleet Mobility Services Regular/Temporary Regular Grant Funded or Pooled Position Not Applicable Category Technical Location Various locations in Austin area Preferred Qualifications Preferred Experience; Experience maintaining and repairing heavy duty refuse (garbage collection) vehicles Experience maintaining and repairing diesel fuel vehicles Experience maintaining and repairing hydraulic equipment Experience maintaining and repairing alternative fuel vehicles and/or equipment ASE certification(s) or the ability to obtain within six (6) months of employment Duties, Functions and Responsibilities Essential duties and functions, pursuant to the Americans with Disabilities Act, may include the following. Other related duties may be assigned. Performs complex gasoline and diesel engine tune-ups and overhauls. Performs specialized work and repairs on engines, carburetors, transmissions, hydraulic systems, electrical systems, and other complex vehicle components. Repairs heavy equipment specifically serviced by the service center. Disassembles, repairs, services, reassembles, and reinstalls vehicle accessories and systems, including brakes, transmissions, hydraulic or pneumatic systems, cooling systems and radiators, air conditioning, suspension, vehicle generators, carburetors and fuel injection, starters, and pumps. Performs wheel alignments on all types of heavy equipment, such as crawler loaders, backhoes and bulldozers. Operates and uses acetylene torch to repair equipment. Records maintenance and service data on designated forms. Performs preventive maintenance, as required. Responsibilities - Supervision and/or Leadership Exercised: May provide leadership, work assignments, evaluations, training and guidance to others. Knowledge, Skills and Abilities Must possess required knowledge, skills, abilities, and experience and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed. Knowledge of methods, systems and components, and materials used in repair and servicing of vehicles and other equipment including, motorized heavy equipment and trailers. Knowledge of various specialized types of vehicles diagnostic testing and analysis equipment and tools used in vehicle repair and maintenance. Knowledge of fleet operations and services. Knowledge of tasks such as work team concepts and productivity techniques, safety practices, City policy and procedure and other operational requirements. Skill in oral and written communication. Ability to read and comprehend technical manuals. Ability to interact with tact and courtesy and maintain a professional demeanor. Ability to establish and maintain good working relationships with other city employees and the public. Criminal Background Investigation This position does not require a Criminal Background Investigation EEO/ADA City of Austin is committed to compliance with the Americans with Disabilities Act. If you require reasonable accommodation during the application process or have a question regarding an essential job function, please call (512) 974-3210 or Texas Relay by dialing 7-1-1. The City of Austin will not discriminate against any applicant or employee based on race, creed, color, national origin, sex, gender identity, age, religion, veteran status, disability, or sexual orientation. In addition, the City will not discriminate in employment decisions on the basis of an individual’s AIDS , AIDS Related Complex, or HIV status; nor will the City discriminate against individuals who are perceived to be at risk of HIV infection, or who associate with individuals who are believed to be at risk. Information For City Employees: If you are an employee within the department, are in good standing and meet both the minimum and preferred qualifications, then you will receive an initial interview. Supplemental Questions Required fields are indicated with an asterisk (*). The minimum qualifications for the Fleet Equipment Technician III is a graduation from an accredited high school or equivalent plus four (4) years of experience in a related field. Experience may substitute for education up to a maximum of four (4) years. Completion of an accredited automotive, diesel or related certification program may substitute for required experience up to a maximum of six (6) months. An Associate’s degree from an accredited college or university in a related field may substitute for experience, up to a maximum of two (2) years. Licenses and Certifications Required: Requires a Class "C" driver's license. If required, must obtain an appropriate Commercial Driver's License (CDL) within ninety (90) days of employment with the City. If applicable, must be licensed within six (6) months of employment as a Texas State Vehicle Inspector in accordance with Texas Department of Public Safety procedures and regulations. Must be certified within six (6) months of employment with respect to EPA standards in air conditioning service, repairs, and Freon recovery, including Freon recovery equipment operations. Equipment Hand Tool Requirements An incumbent must provide his or her own hand tools, including wrenches, sockets, ratchets, toolbox, etc., as a condition of employment. The individual must meet the minimum hand tool requirements within six (6) months of employment. Physical Requirements: Essential duties are performed in a service center environment with exposure to a variety of motorized equipment, spare parts, tools, oil and lubrication, corrosive liquids, and other potentially hazardous materials. Incumbent may be exposed to loud noise, warm and cold conditions, standing for long periods, frequent stooping and bending, and lift up to fifty (50) pounds. Individuals will need to have good eye-and-hand coordination and read and write in dimly-lit conditions. Do you meet these minimum qualifications? Yes No This position requires a Class "C" Driver License. Do you have a Class "C" Driver License or if selected for this position, do you have the ability to acquire a Class "C" Driver License by your hire date? Yes No Which of the following best describes the level of driver license you possess? Class A CDL Class B CDL Texas Class C Operator License Out of State Driver License No Driver License but ability to obtain a Texas Class C or above by date of hire None The City of Austin Driver Eligibility Standards require that External New Hires meet the City’s Driver Record Evaluation (DRE) requisite. To be considered for a driving position, applicants cannot have more than three moving violations or a total of six Driver Record Evaluation points within a period of thirty-six (36) months. Do you meet this requirement? Yes No Which of the following best describes your level with a Texas State Vehicle Inspector's License? Have Texas State Inspector's License Do not have Texas State Inspector's License but have the ability to obtain the license within six (6) months of employment Do not have Texas State Inspector's License and do not have the ability to obtain the license within six (6) months of employment Optional & Required Documents Required Documents Optional Documents
San Diego State University
5500 Campanile Drive, San Diego, CA 92182, USA
Position Summary Under the general supervision of the School Director, the Equipment Technician will perform preventive maintenance, repair, assembly or fabrication, and installation of the School’s equipment in specialized facilities that support creative practice in ceramics, furniture design and woodworking, jewelry and metalwork, book arts and printmaking, drawing, painting, sculpture, photography, graphic design, interior architecture, and multimedia. The Equipment Technician will collaborate with members of the School on the proper use of tools, equipment, and materials; inventory, order, pick-up, and stock supplies and equipment parts; and maintain a safe and healthy working and learning environment. The Equipment Technician will serve as the School of Art and Design’s safety monitor and Environmental Health and Safety (EH&S) liaison. These roles entail oversight of the School’s safety forms, information gathering for Environmental Health & Safety (EH&S) compliance reports, and support of faculty and staff to develop and enforce safety procedures. The Equipment Technician will cooperate with EH&S regarding general safety practices, such as procedures for hazardous waste disposal and chemical spill treatment. The Equipment Technician will support the School’s growth in the use of 3D modeling (CAD) and digital fabrication (CNC/CAM). In addition, the incumbent will train and supervise student workers on general repair and maintenance projects and inventory management. This is a full-time (1.0 time-base), benefits eligible, permanent/probationary position. This position is designated non-exempt under FLSA and is eligible for overtime compensation. Standard SDSU work hours are Monday - Friday, 8:00 a.m. to 4:30 p.m., but may vary based on operational needs. The individual hired into this role will work on campus at SDSU in San Diego. Department Summary The School of Art and Design in the College of Professional Studies and Fine Arts is a creative learning community in which students develop their practice as artists, designers, and art historians who work in and across media while enhancing their visual, material, and conceptual thinking. Located on the Pacific Rim and at the border with Mexico, the School is dedicated to the integration of art, design, and community building in alignment with the School’s commitments to social / environmental justice and innovative entrepreneurship. Through both discipline-specific and multidisciplinary approaches to teaching and learning, we support students to innovate solutions, express ideas, imagine possibilities, and interpret the world through historical, cultural, and global contexts. The School of Art and Design believes representation matters. Through our Diversity, Equity and Inclusion Program, led by a collaborative team of students, faculty, and staff, we endeavor to create a safe, inclusive, and diverse academic and creative environment where students of all cultures, races, genders, religions, and sexual orientations can learn and create. We work to promote diverse communities and new cultural experiences that inspire students to break down barriers and transform lives, and with our guidance and support, help them navigate academic, personal, and professional success to emerge as dynamic artists and designers of tomorrow. In addition to sixteen tenured/tenure track faculty members, the School employs approximately 70 lecturers and graduate teaching associates to serve over 1,100 majors and 20 graduate students. The Director leads the School with the support of eight full-time staff positions and one part-time Programs and Financial Coordinator. The full-time positions include two Equipment Technicians, one Administrative Analyst/Specialist, three Administrative Support Coordinator II positions, one Instructional Support Technician, and one Information Technology Consultant. For more information regarding the College of Professional Studies and Fine Arts, click here . Education and Experience Equivalent to one year of journey-level or skilled experience in the maintenance, repair and operation of scientific or technical equipment in the specialty area to which assigned such as mechanical, electromechanical, electronics or in the specialized category requiring construction and fabrication skills and some precision work, trade or craft skills working with a variety of unique materials, or specialized knowledge and skill related to unusual equipment. OR Equivalent to two years of semi-skilled experience maintaining and repairing scientific or technical equipment or related equipment experience as part of instructional support activities may be substituted for the required experience. OR Equivalent to two years of trade school or technical arts training with specialization in the type of equipment repair to which assigned, completion of an apprenticeship program, or completion of a full military specialization in the required type of equipment maintenance and repair may be substituted for the required experience. Key Qualifications Experience troubleshooting and performing basic repairs on equipment and tools. Experience working with 3D modeling printers and Computer Numerical Control (CNC/Computer-aided (CAM) manufacturing systems. Licenses/Certifications Required California Driver’s License or the ability to obtain one within 10 days of hire. Personnel lift and forklift (training will be provided). Compensation and Benefits Starting salary upon appointment is not expected to exceed $4,442 per month . Salary placement is determined by the education, experience, and qualifications the candidate brings to the position, internal equity, and the hiring department’s fiscal resources. San Diego State University offers a rich benefits package that constitutes a major portion of total compensation. For more information regarding SDSU benefits, please click here . CSU Classification Salary Range: $3,658 - $6,620 per month. Diversity and Community at SDSU At SDSU, our diversity gives us power and benefits every single member of our community. Through our commitment to equity and inclusion, we encourage all members of our community to purposefully learn from one another through open and respectful dialogue and responsible engagement. For more information, click here . Principles of Community At San Diego State University, we are a community of diverse individuals who have and represent many perspectives, beliefs and identities. This diversity lends our community strength, and we commit to creating and sustaining an inclusive and intellectually vibrant environment that benefits all members of our university. SDSU’s Principles of Community is an aspirational statement that is intended to evolve over time. The statement reflects the ideals we are encouraged to uphold in our interactions with one another. Supplemental Information Initial review of the required application materials, including cover letters and resumes, will begin on March 8, 2024. To receive full consideration, apply by March 7, 2024. The position will remain open until filled. The person holding this position is considered a ‘mandated reporter’ under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. San Diego State University is not a sponsoring agency for staff or management positions (e.g., H-1B visa). Applicants must currently be authorized to work in the United States on a full-time basis. Offers of employment are contingent upon the presentation of documents that demonstrate a person's identity and authorization to work in the United States, which are consistent with the provisions of the Immigration Reform and Control Act. A background check (including a criminal records check) must be completed satisfactorily and is required for employment. SDSU will make a conditional offer of employment, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current SDSU employee who was conditionally offered the position. SDSU is a smoke-free campus. For more information, please click here . SDSU is an Equal Opportunity Employer that considers all qualified candidates for employment and does not discriminate on the basis of race, religion, color, ancestry, age, disability, genetic information, gender, gender identity, gender expression, marital status, medical condition, national origin, sex, sexual orientation, covered military and veteran status, or any other protected characteristic or status. Reasonable accommodations will be provided for qualified applicants with disabilities who request an accommodation by contacting Tina Deesen at tdeesen@sdsu.edu . Advertised: Feb 23 2024 Pacific Standard Time Applications close: Closing Date/Time:
Mar 07, 2024
Position Summary Under the general supervision of the School Director, the Equipment Technician will perform preventive maintenance, repair, assembly or fabrication, and installation of the School’s equipment in specialized facilities that support creative practice in ceramics, furniture design and woodworking, jewelry and metalwork, book arts and printmaking, drawing, painting, sculpture, photography, graphic design, interior architecture, and multimedia. The Equipment Technician will collaborate with members of the School on the proper use of tools, equipment, and materials; inventory, order, pick-up, and stock supplies and equipment parts; and maintain a safe and healthy working and learning environment. The Equipment Technician will serve as the School of Art and Design’s safety monitor and Environmental Health and Safety (EH&S) liaison. These roles entail oversight of the School’s safety forms, information gathering for Environmental Health & Safety (EH&S) compliance reports, and support of faculty and staff to develop and enforce safety procedures. The Equipment Technician will cooperate with EH&S regarding general safety practices, such as procedures for hazardous waste disposal and chemical spill treatment. The Equipment Technician will support the School’s growth in the use of 3D modeling (CAD) and digital fabrication (CNC/CAM). In addition, the incumbent will train and supervise student workers on general repair and maintenance projects and inventory management. This is a full-time (1.0 time-base), benefits eligible, permanent/probationary position. This position is designated non-exempt under FLSA and is eligible for overtime compensation. Standard SDSU work hours are Monday - Friday, 8:00 a.m. to 4:30 p.m., but may vary based on operational needs. The individual hired into this role will work on campus at SDSU in San Diego. Department Summary The School of Art and Design in the College of Professional Studies and Fine Arts is a creative learning community in which students develop their practice as artists, designers, and art historians who work in and across media while enhancing their visual, material, and conceptual thinking. Located on the Pacific Rim and at the border with Mexico, the School is dedicated to the integration of art, design, and community building in alignment with the School’s commitments to social / environmental justice and innovative entrepreneurship. Through both discipline-specific and multidisciplinary approaches to teaching and learning, we support students to innovate solutions, express ideas, imagine possibilities, and interpret the world through historical, cultural, and global contexts. The School of Art and Design believes representation matters. Through our Diversity, Equity and Inclusion Program, led by a collaborative team of students, faculty, and staff, we endeavor to create a safe, inclusive, and diverse academic and creative environment where students of all cultures, races, genders, religions, and sexual orientations can learn and create. We work to promote diverse communities and new cultural experiences that inspire students to break down barriers and transform lives, and with our guidance and support, help them navigate academic, personal, and professional success to emerge as dynamic artists and designers of tomorrow. In addition to sixteen tenured/tenure track faculty members, the School employs approximately 70 lecturers and graduate teaching associates to serve over 1,100 majors and 20 graduate students. The Director leads the School with the support of eight full-time staff positions and one part-time Programs and Financial Coordinator. The full-time positions include two Equipment Technicians, one Administrative Analyst/Specialist, three Administrative Support Coordinator II positions, one Instructional Support Technician, and one Information Technology Consultant. For more information regarding the College of Professional Studies and Fine Arts, click here . Education and Experience Equivalent to one year of journey-level or skilled experience in the maintenance, repair and operation of scientific or technical equipment in the specialty area to which assigned such as mechanical, electromechanical, electronics or in the specialized category requiring construction and fabrication skills and some precision work, trade or craft skills working with a variety of unique materials, or specialized knowledge and skill related to unusual equipment. OR Equivalent to two years of semi-skilled experience maintaining and repairing scientific or technical equipment or related equipment experience as part of instructional support activities may be substituted for the required experience. OR Equivalent to two years of trade school or technical arts training with specialization in the type of equipment repair to which assigned, completion of an apprenticeship program, or completion of a full military specialization in the required type of equipment maintenance and repair may be substituted for the required experience. Key Qualifications Experience troubleshooting and performing basic repairs on equipment and tools. Experience working with 3D modeling printers and Computer Numerical Control (CNC/Computer-aided (CAM) manufacturing systems. Licenses/Certifications Required California Driver’s License or the ability to obtain one within 10 days of hire. Personnel lift and forklift (training will be provided). Compensation and Benefits Starting salary upon appointment is not expected to exceed $4,442 per month . Salary placement is determined by the education, experience, and qualifications the candidate brings to the position, internal equity, and the hiring department’s fiscal resources. San Diego State University offers a rich benefits package that constitutes a major portion of total compensation. For more information regarding SDSU benefits, please click here . CSU Classification Salary Range: $3,658 - $6,620 per month. Diversity and Community at SDSU At SDSU, our diversity gives us power and benefits every single member of our community. Through our commitment to equity and inclusion, we encourage all members of our community to purposefully learn from one another through open and respectful dialogue and responsible engagement. For more information, click here . Principles of Community At San Diego State University, we are a community of diverse individuals who have and represent many perspectives, beliefs and identities. This diversity lends our community strength, and we commit to creating and sustaining an inclusive and intellectually vibrant environment that benefits all members of our university. SDSU’s Principles of Community is an aspirational statement that is intended to evolve over time. The statement reflects the ideals we are encouraged to uphold in our interactions with one another. Supplemental Information Initial review of the required application materials, including cover letters and resumes, will begin on March 8, 2024. To receive full consideration, apply by March 7, 2024. The position will remain open until filled. The person holding this position is considered a ‘mandated reporter’ under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. San Diego State University is not a sponsoring agency for staff or management positions (e.g., H-1B visa). Applicants must currently be authorized to work in the United States on a full-time basis. Offers of employment are contingent upon the presentation of documents that demonstrate a person's identity and authorization to work in the United States, which are consistent with the provisions of the Immigration Reform and Control Act. A background check (including a criminal records check) must be completed satisfactorily and is required for employment. SDSU will make a conditional offer of employment, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current SDSU employee who was conditionally offered the position. SDSU is a smoke-free campus. For more information, please click here . SDSU is an Equal Opportunity Employer that considers all qualified candidates for employment and does not discriminate on the basis of race, religion, color, ancestry, age, disability, genetic information, gender, gender identity, gender expression, marital status, medical condition, national origin, sex, sexual orientation, covered military and veteran status, or any other protected characteristic or status. Reasonable accommodations will be provided for qualified applicants with disabilities who request an accommodation by contacting Tina Deesen at tdeesen@sdsu.edu . Advertised: Feb 23 2024 Pacific Standard Time Applications close: Closing Date/Time:
San Diego State University
5500 Campanile Drive, San Diego, CA 92182, USA
Position Summary Under the general supervision of the School Director, the Equipment Technician will perform preventive maintenance, repair, assembly or fabrication, and installation of the School’s equipment in specialized facilities that support creative practice in ceramics, furniture design and woodworking, jewelry and metalwork, book arts and printmaking, drawing, painting, sculpture, photography, graphic design, interior architecture, and multimedia. The Equipment Technician will collaborate with members of the School on the proper use of tools, equipment, and materials; inventory, order, pick-up, and stock supplies and equipment parts; and maintain a safe and healthy working and learning environment. The Equipment Technician will serve as the School’s exhibition preparator and provide construction and installation support for the University Art Gallery and three student galleries. The Equipment Technician will possess the expertise necessary to manage the Gallery Program’s publication assets, including books, exhibition catalogues, periodicals, and graduate student theses. The Equipment Technician will support the School’s growth in the use of 3D modeling (CAD) and digital fabrication (CNC/CAM). In addition, the incumbent will train and supervise student workers on general repair and maintenance projects and inventory management. This is a full-time (1.0 time-base), benefits eligible, permanent/probationary position. This position is designated non-exempt under FLSA and is eligible for overtime compensation. Standard SDSU work hours are Monday - Friday, 8:00 a.m. to 4:30 p.m., but may vary based on operational needs. The individual hired into this role will work on campus at SDSU in San Diego. Department Summary The School of Art and Design in the College of Professional Studies and Fine Arts is a creative learning community in which students develop their practice as artists, designers, and art historians who work in and across media while enhancing their visual, material, and conceptual thinking. Located on the Pacific Rim and at the border with Mexico, the School is dedicated to the integration of art, design, and community building in alignment with the School’s commitments to social / environmental justice and innovative entrepreneurship. Through both discipline-specific and multidisciplinary approaches to teaching and learning, we support students to innovate solutions, express ideas, imagine possibilities, and interpret the world through historical, cultural, and global contexts. The School of Art and Design believes representation matters. Through our Diversity, Equity and Inclusion Program, led by a collaborative team of students, faculty, and staff, we endeavor to create a safe, inclusive, and diverse academic and creative environment where students of all cultures, races, genders, religions, and sexual orientations can learn and create. We work to promote diverse communities and new cultural experiences that inspire students to break down barriers and transform lives, and with our guidance and support, help them navigate academic, personal, and professional success to emerge as dynamic artists and designers of tomorrow. In addition to sixteen tenured/tenure track faculty members, the School employs approximately 70 lecturers and graduate teaching associates to serve over 1,100 majors and 20 graduate students. The Director leads the School with the support of eight full-time staff positions and one part-time Programs and Financial Coordinator. The full-time positions include two Equipment Technicians, one Administrative Analyst/Specialist, three Administrative Support Coordinator II positions, one Instructional Support Technician, and one Information Technology Consultant. For more information regarding the College of Professional Studies and Fine Arts, click here . Education and Experience Equivalent to one year of journey-level or skilled experience in the maintenance, repair and operation of scientific or technical equipment in the specialty area to which assigned such as mechanical, electromechanical, electronics or in the specialized category requiring construction and fabrication skills and some precision work, trade or craft skills working with a variety of unique materials, or specialized knowledge and skill related to unusual equipment. OR Equivalent to two years of semi-skilled experience maintaining and repairing scientific or technical equipment or related equipment experience as part of instructional support activities may be substituted for the required experience. OR Equivalent to two years of trade school or technical arts training with specialization in the type of equipment repair to which assigned, completion of an apprenticeship program, or completion of a full military specialization in the required type of equipment maintenance and repair may be substituted for the required experience. Key Qualifications Experience troubleshooting and performing basic repairs on equipment and tools. Experience working with 3D modeling printers and Computer Numerical Control (CNC/Computer-aided (CAM) manufacturing systems. Licenses/Certifications Required California Driver’s License or the ability to obtain one within 10 days of hire. Personnel lift and forklift (training will be provided). Compensation and Benefits Starting salary upon appointment is not expected to exceed $4,442 per month . Salary placement is determined by the education, experience, and qualifications the candidate brings to the position, internal equity, and the hiring department’s fiscal resources. San Diego State University offers a rich benefits package that constitutes a major portion of total compensation. For more information regarding SDSU benefits, please click here . CSU Classification Salary Range: $3,658 - $6,620 per month. Diversity and Community at SDSU At SDSU, our diversity gives us power and benefits every single member of our community. Through our commitment to equity and inclusion, we encourage all members of our community to purposefully learn from one another through open and respectful dialogue and responsible engagement. For more information, click here . Principles of Community At San Diego State University, we are a community of diverse individuals who have and represent many perspectives, beliefs and identities. This diversity lends our community strength, and we commit to creating and sustaining an inclusive and intellectually vibrant environment that benefits all members of our university. SDSU’s Principles of Community is an aspirational statement that is intended to evolve over time. The statement reflects the ideals we are encouraged to uphold in our interactions with one another. Supplemental Information Initial review of the required application materials, including cover letters and resumes, will begin on March 8, 2024. To receive full consideration, apply by March 7, 2024. The position will remain open until filled. The person holding this position is considered a ‘mandated reporter’ under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. San Diego State University is not a sponsoring agency for staff or management positions (e.g., H-1B visa). Applicants must currently be authorized to work in the United States on a full-time basis. Offers of employment are contingent upon the presentation of documents that demonstrate a person's identity and authorization to work in the United States, which are consistent with the provisions of the Immigration Reform and Control Act. A background check (including a criminal records check) must be completed satisfactorily and is required for employment. SDSU will make a conditional offer of employment, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current SDSU employee who was conditionally offered the position. SDSU is a smoke-free campus. For more information, please click here . SDSU is an Equal Opportunity Employer that considers all qualified candidates for employment and does not discriminate on the basis of race, religion, color, ancestry, age, disability, genetic information, gender, gender identity, gender expression, marital status, medical condition, national origin, sex, sexual orientation, covered military and veteran status, or any other protected characteristic or status. Reasonable accommodations will be provided for qualified applicants with disabilities who request an accommodation by contacting Tina Deesen at tdeesen@sdsu.edu . Advertised: Feb 23 2024 Pacific Standard Time Applications close: Closing Date/Time:
Mar 07, 2024
Position Summary Under the general supervision of the School Director, the Equipment Technician will perform preventive maintenance, repair, assembly or fabrication, and installation of the School’s equipment in specialized facilities that support creative practice in ceramics, furniture design and woodworking, jewelry and metalwork, book arts and printmaking, drawing, painting, sculpture, photography, graphic design, interior architecture, and multimedia. The Equipment Technician will collaborate with members of the School on the proper use of tools, equipment, and materials; inventory, order, pick-up, and stock supplies and equipment parts; and maintain a safe and healthy working and learning environment. The Equipment Technician will serve as the School’s exhibition preparator and provide construction and installation support for the University Art Gallery and three student galleries. The Equipment Technician will possess the expertise necessary to manage the Gallery Program’s publication assets, including books, exhibition catalogues, periodicals, and graduate student theses. The Equipment Technician will support the School’s growth in the use of 3D modeling (CAD) and digital fabrication (CNC/CAM). In addition, the incumbent will train and supervise student workers on general repair and maintenance projects and inventory management. This is a full-time (1.0 time-base), benefits eligible, permanent/probationary position. This position is designated non-exempt under FLSA and is eligible for overtime compensation. Standard SDSU work hours are Monday - Friday, 8:00 a.m. to 4:30 p.m., but may vary based on operational needs. The individual hired into this role will work on campus at SDSU in San Diego. Department Summary The School of Art and Design in the College of Professional Studies and Fine Arts is a creative learning community in which students develop their practice as artists, designers, and art historians who work in and across media while enhancing their visual, material, and conceptual thinking. Located on the Pacific Rim and at the border with Mexico, the School is dedicated to the integration of art, design, and community building in alignment with the School’s commitments to social / environmental justice and innovative entrepreneurship. Through both discipline-specific and multidisciplinary approaches to teaching and learning, we support students to innovate solutions, express ideas, imagine possibilities, and interpret the world through historical, cultural, and global contexts. The School of Art and Design believes representation matters. Through our Diversity, Equity and Inclusion Program, led by a collaborative team of students, faculty, and staff, we endeavor to create a safe, inclusive, and diverse academic and creative environment where students of all cultures, races, genders, religions, and sexual orientations can learn and create. We work to promote diverse communities and new cultural experiences that inspire students to break down barriers and transform lives, and with our guidance and support, help them navigate academic, personal, and professional success to emerge as dynamic artists and designers of tomorrow. In addition to sixteen tenured/tenure track faculty members, the School employs approximately 70 lecturers and graduate teaching associates to serve over 1,100 majors and 20 graduate students. The Director leads the School with the support of eight full-time staff positions and one part-time Programs and Financial Coordinator. The full-time positions include two Equipment Technicians, one Administrative Analyst/Specialist, three Administrative Support Coordinator II positions, one Instructional Support Technician, and one Information Technology Consultant. For more information regarding the College of Professional Studies and Fine Arts, click here . Education and Experience Equivalent to one year of journey-level or skilled experience in the maintenance, repair and operation of scientific or technical equipment in the specialty area to which assigned such as mechanical, electromechanical, electronics or in the specialized category requiring construction and fabrication skills and some precision work, trade or craft skills working with a variety of unique materials, or specialized knowledge and skill related to unusual equipment. OR Equivalent to two years of semi-skilled experience maintaining and repairing scientific or technical equipment or related equipment experience as part of instructional support activities may be substituted for the required experience. OR Equivalent to two years of trade school or technical arts training with specialization in the type of equipment repair to which assigned, completion of an apprenticeship program, or completion of a full military specialization in the required type of equipment maintenance and repair may be substituted for the required experience. Key Qualifications Experience troubleshooting and performing basic repairs on equipment and tools. Experience working with 3D modeling printers and Computer Numerical Control (CNC/Computer-aided (CAM) manufacturing systems. Licenses/Certifications Required California Driver’s License or the ability to obtain one within 10 days of hire. Personnel lift and forklift (training will be provided). Compensation and Benefits Starting salary upon appointment is not expected to exceed $4,442 per month . Salary placement is determined by the education, experience, and qualifications the candidate brings to the position, internal equity, and the hiring department’s fiscal resources. San Diego State University offers a rich benefits package that constitutes a major portion of total compensation. For more information regarding SDSU benefits, please click here . CSU Classification Salary Range: $3,658 - $6,620 per month. Diversity and Community at SDSU At SDSU, our diversity gives us power and benefits every single member of our community. Through our commitment to equity and inclusion, we encourage all members of our community to purposefully learn from one another through open and respectful dialogue and responsible engagement. For more information, click here . Principles of Community At San Diego State University, we are a community of diverse individuals who have and represent many perspectives, beliefs and identities. This diversity lends our community strength, and we commit to creating and sustaining an inclusive and intellectually vibrant environment that benefits all members of our university. SDSU’s Principles of Community is an aspirational statement that is intended to evolve over time. The statement reflects the ideals we are encouraged to uphold in our interactions with one another. Supplemental Information Initial review of the required application materials, including cover letters and resumes, will begin on March 8, 2024. To receive full consideration, apply by March 7, 2024. The position will remain open until filled. The person holding this position is considered a ‘mandated reporter’ under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. San Diego State University is not a sponsoring agency for staff or management positions (e.g., H-1B visa). Applicants must currently be authorized to work in the United States on a full-time basis. Offers of employment are contingent upon the presentation of documents that demonstrate a person's identity and authorization to work in the United States, which are consistent with the provisions of the Immigration Reform and Control Act. A background check (including a criminal records check) must be completed satisfactorily and is required for employment. SDSU will make a conditional offer of employment, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current SDSU employee who was conditionally offered the position. SDSU is a smoke-free campus. For more information, please click here . SDSU is an Equal Opportunity Employer that considers all qualified candidates for employment and does not discriminate on the basis of race, religion, color, ancestry, age, disability, genetic information, gender, gender identity, gender expression, marital status, medical condition, national origin, sex, sexual orientation, covered military and veteran status, or any other protected characteristic or status. Reasonable accommodations will be provided for qualified applicants with disabilities who request an accommodation by contacting Tina Deesen at tdeesen@sdsu.edu . Advertised: Feb 23 2024 Pacific Standard Time Applications close: Closing Date/Time:
City of Galveston, TX
Galveston, Texas, United States
Job Description Under general supervision, operates various vehicles, heavy equipment and specialized equipment within the Public Works Department in one or more specified division. ESSENTIAL FUNCTIONS : Essential functions, as defined under the Americans with Disabilities Act, may include any of the following representative duties, knowledge, and skills. Factors such as regular attendance at the job are not routinely listed in job descriptions, but are an essential function. Essential duties and responsibilities may include, but are not limited to, the following: Operates trucks of various sizes and weights in the loading, hauling and unloading of equipment, materials and supplies. Operates construction of power equipment, including backhoes, front-end loaders and hydraulic excavators. May operate a street sweeper. May install or repair streets and drainage lines. May vacuum and water jet residential sewer lines. May inspect and clean man holes. May perform various building maintenance and repair activities. May use various hand and power tools for work projects. May provide work direction to members of work crews. Performs traffic control for work projects. Ensures safety rules and regulations are followed. Performs safety inspections of vehicles and equipment. Maintains activity reports. Provide assistance to other drivers as necessary. Supports the relationship between the City of Galveston and the general public by demonstrating courteous and cooperative behavior when interacting with citizens, visitors, and City staff; maintains confidentiality of work-related issues and City information; performs other duties as required or assigned. Employees may at any time be required to work in order to provide for the safety and well-being of the general public, including the delivery and restoration of vital services, in the event of an emergency. KNOWLEDGE AND SKILLS: Knowledge: City policies and procedures. Operations of motorized construction and maintenance equipment and vehicles. Construction, maintenance and repair practices and methods. Street or drainage system operations. Recordkeeping practices. Safety procedures and practices. Personal computer and various software applications. Skill in: Handling situations requiring diplomacy, fairness, firmness and sound judgment. Understanding and applying City policies and procedures. Compiling data; maintaining records and files; and preparing clear and concise reports. Providing efficient customer service. Establishing and maintaining cooperative working relationships with all levels within the City. Communicating effectively verbally and in writing. Streets or Drainage Technician Trainee Salary Range: $34,040-$48,672 Under general supervision, the Streets or Drainage Tech Trainee is an entry-level position responsible for assisting in the maintenance and repair of the City’s Streets or Drainage system. Provides assistance to Technicians and Crew Leaders as needed. Minimum Qualifications: High School diploma or equivalent; A valid Texas Driver’s License is required. Streets or Drainage Technician I Salary Range: $35,562-$56,343 Under general supervision, the Streets or Drainage Technician I participates in the City’s streets or drainage initiatives; operates small/medium sized equipment and maintains various types of maintenance equipment and tools; prepares and maintains records; ensures compliance with regulatory agency guidelines. Utilizes technology to record the location of streets or drainage assets. Participates in the troubleshooting, and preventive maintenance of a variety of equipment including pumps and piping. Minimum Qualifications: High School diploma or equivalent; A valid Texas Driver’s License is required. Must be able to demonstrate operation of heavy equipment. Must pass internal assessment and identified training courses for advancement Streets or Drainage Technician II Salary Range: $43,483-$65,225 Under general supervision, the Streets or Drainage Technician II coordinates, performs, and assists in the supervision and maintenance of the City’s streets or drainage projects and initiatives; operates all heavy equipment and maintains various types of maintenance equipment and tools; prepares and maintains records and ensures compliance with regulatory agency guidelines. Utilizes technology to record the location of streets or drainage assets. Analyzes and monitors streets or drainage system processes, and identifies and implements intermediate to advanced level process adjustments to ensure optimum performance. Minimum Qualifications: High School diploma or equivalent; AND two years’ experience in Street or Drainage maintenance and repair operations; ORan equivalent combination of education and experience. A valid Texas Class A Commercial Driver’s License is required. Must be able to demonstrate operation of heavy equipment. Must pass internal assessment and identified training courses for advancement PHYSICAL DEMANDS AND WORKING ENVIRONMENT: Work is performed primarily in an outdoor work environment. May be exposed to dangerous machinery, extreme weather conditions, potential physical harm, hazardous chemicals and infectious diseases. May be required to work in confined spaces. May be required to climb ladders. May be required to lift and carry items weighing up to 100 pounds. Closing Date/Time: September 27, 2024 at 11:59 PM CST
Mar 23, 2024
Full Time
Job Description Under general supervision, operates various vehicles, heavy equipment and specialized equipment within the Public Works Department in one or more specified division. ESSENTIAL FUNCTIONS : Essential functions, as defined under the Americans with Disabilities Act, may include any of the following representative duties, knowledge, and skills. Factors such as regular attendance at the job are not routinely listed in job descriptions, but are an essential function. Essential duties and responsibilities may include, but are not limited to, the following: Operates trucks of various sizes and weights in the loading, hauling and unloading of equipment, materials and supplies. Operates construction of power equipment, including backhoes, front-end loaders and hydraulic excavators. May operate a street sweeper. May install or repair streets and drainage lines. May vacuum and water jet residential sewer lines. May inspect and clean man holes. May perform various building maintenance and repair activities. May use various hand and power tools for work projects. May provide work direction to members of work crews. Performs traffic control for work projects. Ensures safety rules and regulations are followed. Performs safety inspections of vehicles and equipment. Maintains activity reports. Provide assistance to other drivers as necessary. Supports the relationship between the City of Galveston and the general public by demonstrating courteous and cooperative behavior when interacting with citizens, visitors, and City staff; maintains confidentiality of work-related issues and City information; performs other duties as required or assigned. Employees may at any time be required to work in order to provide for the safety and well-being of the general public, including the delivery and restoration of vital services, in the event of an emergency. KNOWLEDGE AND SKILLS: Knowledge: City policies and procedures. Operations of motorized construction and maintenance equipment and vehicles. Construction, maintenance and repair practices and methods. Street or drainage system operations. Recordkeeping practices. Safety procedures and practices. Personal computer and various software applications. Skill in: Handling situations requiring diplomacy, fairness, firmness and sound judgment. Understanding and applying City policies and procedures. Compiling data; maintaining records and files; and preparing clear and concise reports. Providing efficient customer service. Establishing and maintaining cooperative working relationships with all levels within the City. Communicating effectively verbally and in writing. Streets or Drainage Technician Trainee Salary Range: $34,040-$48,672 Under general supervision, the Streets or Drainage Tech Trainee is an entry-level position responsible for assisting in the maintenance and repair of the City’s Streets or Drainage system. Provides assistance to Technicians and Crew Leaders as needed. Minimum Qualifications: High School diploma or equivalent; A valid Texas Driver’s License is required. Streets or Drainage Technician I Salary Range: $35,562-$56,343 Under general supervision, the Streets or Drainage Technician I participates in the City’s streets or drainage initiatives; operates small/medium sized equipment and maintains various types of maintenance equipment and tools; prepares and maintains records; ensures compliance with regulatory agency guidelines. Utilizes technology to record the location of streets or drainage assets. Participates in the troubleshooting, and preventive maintenance of a variety of equipment including pumps and piping. Minimum Qualifications: High School diploma or equivalent; A valid Texas Driver’s License is required. Must be able to demonstrate operation of heavy equipment. Must pass internal assessment and identified training courses for advancement Streets or Drainage Technician II Salary Range: $43,483-$65,225 Under general supervision, the Streets or Drainage Technician II coordinates, performs, and assists in the supervision and maintenance of the City’s streets or drainage projects and initiatives; operates all heavy equipment and maintains various types of maintenance equipment and tools; prepares and maintains records and ensures compliance with regulatory agency guidelines. Utilizes technology to record the location of streets or drainage assets. Analyzes and monitors streets or drainage system processes, and identifies and implements intermediate to advanced level process adjustments to ensure optimum performance. Minimum Qualifications: High School diploma or equivalent; AND two years’ experience in Street or Drainage maintenance and repair operations; ORan equivalent combination of education and experience. A valid Texas Class A Commercial Driver’s License is required. Must be able to demonstrate operation of heavy equipment. Must pass internal assessment and identified training courses for advancement PHYSICAL DEMANDS AND WORKING ENVIRONMENT: Work is performed primarily in an outdoor work environment. May be exposed to dangerous machinery, extreme weather conditions, potential physical harm, hazardous chemicals and infectious diseases. May be required to work in confined spaces. May be required to climb ladders. May be required to lift and carry items weighing up to 100 pounds. Closing Date/Time: September 27, 2024 at 11:59 PM CST
Sonoma County, CA
Santa Rosa, California, United States
Position Information Build your career with the County of Sonoma as an Extra-Help Public Works Maintenance Worker! Starting salary up to $32.37/hour! * The Sonoma County Public Infrastructure Department (SoCoPi) is responsible for the construction, operation, and maintenance of the County-maintained public road system and airport facilities. Every year, they manage numerous capital paving, construction, and road safety improvement projects. Their Maintenance Workers perform a variety of unskilled and semi-skilled road maintenance and facility management tasks. Duties of this extra-help position include: Performing pavement maintenance including but not limited to pot-hole patching, culvert cleaning, sign installation, vegetation removal, paint striping, operating various vehicle and small power tools used in road maintenance activities. Performing preventive maintenance on various equipment such as trucks, other vehicles and equipment needed for road maintenance activities. Working safely in all environmental conditions and situations. Using general/basic computer skills needed for timekeeping, online training, and documenting completed work. The person selected for this entry-level position will normally be required to work within a team on daily assignments that would require more than one individual to complete the work safely. In addition, a strong level of integrity is necessary to be successful in this position. A good teamwork dynamic is necessary along with a high level of communication. The selected person will be dependable team player with good communication skills, a positive attitude, a sense of humor, and have a good ability to interact well with a wide variety of personalities. The ideal candidates for these positions will have some experience in road construction or maintenance work that includes the use of light mechanical machines, hand tools, and performing heavy physical labor. Trainings and certifications in power tool operation, towing, flagging, chain saws and chippers, and CPR and First Aid are desirable. In addition, they will have a current, valid driver's license, and will also need a traffic flagger certification which can be acquired after hire. In addition, they will possess the ability to: Perform a variety of semiskilled manual maintenance and construction tasks for extended periods of time under unfavorable weather conditions. Safely operate light motorized machines and power tools. Understand and follow oral and written instructions. Follow basic safety policies and procedures. Accurately complete simple report forms and work effectively with others. Read and write English at a level appropriate for successful job performance and perform basic arithmetic calculations. Demonstrate physical strength, endurance, and mechanical aptitude. Use basic computer skills needed for timekeeping, documenting completed work and various online trainings. Work Assignment & Locations: Maintenance Workers may be assigned to the Airport, Culvert, Road, Traffic, or Countywide crews, and may work at any of the Road Maintenance Yards located in Cotati, Guerneville, Healdsburg/Annapolis, Santa Rosa, and/or Sonoma. Working Conditions: Job duties of the Maintenance Worker I position require sitting, standing, walking on level, slopes, and slippery surfaces at various heights, reaching, kneeling, bending, stooping, crawling, squatting, crouching, and grasping. They also require the need to lift, carry, and push equipment, materials, and supplies weighing up to 100 pounds. Incumbents are required to be available for after-hours emergency response; work in close proximity to moving traffic; and work in all weather conditions, including rain, cold, heat, fumes, dust, and other air contaminants which may cause eye and skin irritation. The nature of the work also requires incumbents to climb ladders, ride personnel lifts, work in confined spaces, handle noise-producing tools and equipment, and drive a motorized vehicle. EXTRA-HELP EMPLOYMENT Extra-help employees relieve or augment permanent staff. Temporary, extra-help employees are not in the classified civil service and do not have property rights to permanently allocated positions. In addition, they do not receive most employee benefits such as long-term disability insurance coverage; accrual of vacation; participation in the County retirement program; or eligibility to take promotional examinations. Temporary, extra-help employees are limited in their employment to a maximum of one calendar year. These employees must be off of work for three months before they can be re-employed on an extra help basis. Extra-help employees who meet the eligibility requirements may qualify for a County contribution toward medical coverage. This recruitment is being conducted to fill a temporary, extra-help Sonoma Public Infrastructure Maintenance Worker I position in Sonoma County Public Infrastructure. This employment list may also be used to fill future full-time, part-time, or extra-help (temporary) positions as they occur during the active status of the list. The Civil Service title is Maintenance Worker I. * Salary is negotiable within the established range. APPLICATION SUBMISSIONS REQUIRE THE SUPPLEMENTAL QUESTIONNAIRE BE COMPLETED. Minimum Qualifications Education and Experience: Any combination of education and training which would provide the opportunity to acquire the knowledge and abilities listed. Normally this would include: Some experience in road construction or maintenance work that includes the use of light mechanical machines, hand tools, and in performing heavy physical labor. License: Possession of a valid driver's license at the appropriate level, including special endorsements as required by the State of California, may be required depending upon assignment to perform the essential job functions of the position. Knowledge, Skills, and Abilities Knowledge of: basic construction materials; safety practices and tools commonly used in construction and maintenance; and preventive maintenance and safe operations of trucks, light construction equipment, machines and power tools. Ability to: perform a variety of semiskilled manual maintenance and construction tasks for extended periods and under unfavorable weather conditions; safely operate light motorized machines and power tools; understand and follow oral and written instructions; follow basic safety policies and procedures; accurately complete simple report forms; work effectively with others; read and write English at a level appropriate for successful job performance; perform basic arithmetic calculations; and demonstrate physical strength, endurance, and mechanical aptitude. Selection Procedure & Some Helpful Tips When Applying Your application information and your responses to the supplemental questions are evaluated and taken into consideration throughout the entire selection process. You should list all employers and positions held within the last ten years in the work history section of your application. Be as thorough as possible when responding to the supplemental questions. You may include history beyond ten years if related to the position for which you are applying. If you held multiple positions with one employer, list out each position separately. Failure to follow these instructions may impact your competitiveness in this process or may result in disqualification. Please visit Getting a Job with the County of Sonoma to review more detailed information about the hiring process, including the application process, examination steps, and department selection process. APPLICATION SUBMISSIONS REQUIRE THE SUPPLEMENTAL QUESTIONNAIRE BE COMPLETED. Responses to supplemental questions are used to evaluate your qualifications. Please provide sufficient information to allow for a thorough evaluation of your qualifications. The selection procedure will consist of the following examination: An Application and Supplemental Questionnaire Appraisal Examination (pass/not pass) will be conducted to evaluate each applicant's combination of educational coursework, training, experience, knowledge, and abilities that relate to this position to ensure satisfaction of the minimum qualifications for this position. Candidates who possess the minimum qualifications for the position will be placed on an extra-help employment list and referred to the department. The department may contact candidates from the employment list who possess the most appropriate job-related qualifications for further consideration. ADDITIONAL INFORMATION A background investigation is required prior to employment. Candidates referred to departments for a selection interview are typically required to sign authorization and release forms enabling such an investigation. Failure to sign prescribed forms will result in the candidate not being considered further for that vacancy. Reference information will not be made available to applicants. Additional requirements, such as successful completion of a physical exam, drug screen, etc., may apply, depending on the duties and responsibilities of the position. If you receive a conditional job offer for the position, the requirements upon which the offer is contingent will be outlined in the conditional job letter. You may also review the Job Classification Screening Schedule to determine the requirements for this position. HOW TO APPLY Applications are accepted online at www.yourpath2sonomacounty.org . Paper applications may be submitted by person, fax (707-565-3770), email, or through the mail. All applications and appropriate supplemental information as outlined in the job bulletin must be RECEIVED by the time and date specified on the first page of this job announcement. Applications received after the recruitment closes will not be accepted. The County of Sonoma values diversity and is dedicated to creating a workplace environment that provides individuals with a sense of belonging. We are committed to having a diverse workforce that is representative of the communities we serve. The County is proud to be an Equal Opportunity Employer where all aspects of employment are based on merit, competence, performance, and business need. HR Analyst: DP HR Technician: EV IMPORTANT NOTE: Benefits described herein do not apply to Extra Help positions. COUNTY OF SONOMA BENEFITS: GENERAL* These are some of the excellent benefits the County offers: Paid Time Off : Competitive vacation and sick leave accruals; 12 paid holidays, and an additional 8 floating holiday hours per year; and may be eligible for up to 8 weeks (320 hours) of Paid Parental Leave after 12 months of County employment. Health Plan : Choice of five health plans (a PPO, EPO, HMO, and two deductible HMOs) with a County contribution toward the premium (the contribution amount varies by bargaining unit. For specific details, please refer to the applicable MOU). A County contribution to a Health Reimbursement Arrangement is available for some bargaining units. Retirement : Fully integrated with Social Security.For more information regarding eligibility, retirement contributions, and reciprocity with prior public service, please visit https://scretire.org/active-/-deferred/when-you-are-hired . IRS 457 Plan : Pre-tax employee contribution up to the IRS annual maximum. Retiree Medical : County contribution to a Health Reimbursement Arrangement to help fund post-retirement employee health insurance/benefits. Plus excellent dental, vision, disability, life insurance, professional development, and more. For answers to specific questions regarding the employment process and more details about benefits or retirement, please contact Human Resources at (707) 565-2331.Additional details about benefit and compensation packages can be found in the MOUs located at https://sonomacounty.ca.gov/administrative-support-and-fiscal-services/human-resources/divisions-and-units/employee-relations/labor-agreements-and-salary-resolution . For specific information about health and welfare benefits including plan options, coverage, and premium amounts go to https://sonomacounty.ca.gov/administrative-support-and-fiscal-services/human-resources or, contact the Human Resources' Risk Management-Benefits Office at benefits@sonoma-county.org or (707) 565-2900. *IMPORTANT NOTES: Benefits described herein do not represent a contract and may be changed without notice. Closing Date/Time: Continuous
Mar 26, 2024
Variable Shift
Position Information Build your career with the County of Sonoma as an Extra-Help Public Works Maintenance Worker! Starting salary up to $32.37/hour! * The Sonoma County Public Infrastructure Department (SoCoPi) is responsible for the construction, operation, and maintenance of the County-maintained public road system and airport facilities. Every year, they manage numerous capital paving, construction, and road safety improvement projects. Their Maintenance Workers perform a variety of unskilled and semi-skilled road maintenance and facility management tasks. Duties of this extra-help position include: Performing pavement maintenance including but not limited to pot-hole patching, culvert cleaning, sign installation, vegetation removal, paint striping, operating various vehicle and small power tools used in road maintenance activities. Performing preventive maintenance on various equipment such as trucks, other vehicles and equipment needed for road maintenance activities. Working safely in all environmental conditions and situations. Using general/basic computer skills needed for timekeeping, online training, and documenting completed work. The person selected for this entry-level position will normally be required to work within a team on daily assignments that would require more than one individual to complete the work safely. In addition, a strong level of integrity is necessary to be successful in this position. A good teamwork dynamic is necessary along with a high level of communication. The selected person will be dependable team player with good communication skills, a positive attitude, a sense of humor, and have a good ability to interact well with a wide variety of personalities. The ideal candidates for these positions will have some experience in road construction or maintenance work that includes the use of light mechanical machines, hand tools, and performing heavy physical labor. Trainings and certifications in power tool operation, towing, flagging, chain saws and chippers, and CPR and First Aid are desirable. In addition, they will have a current, valid driver's license, and will also need a traffic flagger certification which can be acquired after hire. In addition, they will possess the ability to: Perform a variety of semiskilled manual maintenance and construction tasks for extended periods of time under unfavorable weather conditions. Safely operate light motorized machines and power tools. Understand and follow oral and written instructions. Follow basic safety policies and procedures. Accurately complete simple report forms and work effectively with others. Read and write English at a level appropriate for successful job performance and perform basic arithmetic calculations. Demonstrate physical strength, endurance, and mechanical aptitude. Use basic computer skills needed for timekeeping, documenting completed work and various online trainings. Work Assignment & Locations: Maintenance Workers may be assigned to the Airport, Culvert, Road, Traffic, or Countywide crews, and may work at any of the Road Maintenance Yards located in Cotati, Guerneville, Healdsburg/Annapolis, Santa Rosa, and/or Sonoma. Working Conditions: Job duties of the Maintenance Worker I position require sitting, standing, walking on level, slopes, and slippery surfaces at various heights, reaching, kneeling, bending, stooping, crawling, squatting, crouching, and grasping. They also require the need to lift, carry, and push equipment, materials, and supplies weighing up to 100 pounds. Incumbents are required to be available for after-hours emergency response; work in close proximity to moving traffic; and work in all weather conditions, including rain, cold, heat, fumes, dust, and other air contaminants which may cause eye and skin irritation. The nature of the work also requires incumbents to climb ladders, ride personnel lifts, work in confined spaces, handle noise-producing tools and equipment, and drive a motorized vehicle. EXTRA-HELP EMPLOYMENT Extra-help employees relieve or augment permanent staff. Temporary, extra-help employees are not in the classified civil service and do not have property rights to permanently allocated positions. In addition, they do not receive most employee benefits such as long-term disability insurance coverage; accrual of vacation; participation in the County retirement program; or eligibility to take promotional examinations. Temporary, extra-help employees are limited in their employment to a maximum of one calendar year. These employees must be off of work for three months before they can be re-employed on an extra help basis. Extra-help employees who meet the eligibility requirements may qualify for a County contribution toward medical coverage. This recruitment is being conducted to fill a temporary, extra-help Sonoma Public Infrastructure Maintenance Worker I position in Sonoma County Public Infrastructure. This employment list may also be used to fill future full-time, part-time, or extra-help (temporary) positions as they occur during the active status of the list. The Civil Service title is Maintenance Worker I. * Salary is negotiable within the established range. APPLICATION SUBMISSIONS REQUIRE THE SUPPLEMENTAL QUESTIONNAIRE BE COMPLETED. Minimum Qualifications Education and Experience: Any combination of education and training which would provide the opportunity to acquire the knowledge and abilities listed. Normally this would include: Some experience in road construction or maintenance work that includes the use of light mechanical machines, hand tools, and in performing heavy physical labor. License: Possession of a valid driver's license at the appropriate level, including special endorsements as required by the State of California, may be required depending upon assignment to perform the essential job functions of the position. Knowledge, Skills, and Abilities Knowledge of: basic construction materials; safety practices and tools commonly used in construction and maintenance; and preventive maintenance and safe operations of trucks, light construction equipment, machines and power tools. Ability to: perform a variety of semiskilled manual maintenance and construction tasks for extended periods and under unfavorable weather conditions; safely operate light motorized machines and power tools; understand and follow oral and written instructions; follow basic safety policies and procedures; accurately complete simple report forms; work effectively with others; read and write English at a level appropriate for successful job performance; perform basic arithmetic calculations; and demonstrate physical strength, endurance, and mechanical aptitude. Selection Procedure & Some Helpful Tips When Applying Your application information and your responses to the supplemental questions are evaluated and taken into consideration throughout the entire selection process. You should list all employers and positions held within the last ten years in the work history section of your application. Be as thorough as possible when responding to the supplemental questions. You may include history beyond ten years if related to the position for which you are applying. If you held multiple positions with one employer, list out each position separately. Failure to follow these instructions may impact your competitiveness in this process or may result in disqualification. Please visit Getting a Job with the County of Sonoma to review more detailed information about the hiring process, including the application process, examination steps, and department selection process. APPLICATION SUBMISSIONS REQUIRE THE SUPPLEMENTAL QUESTIONNAIRE BE COMPLETED. Responses to supplemental questions are used to evaluate your qualifications. Please provide sufficient information to allow for a thorough evaluation of your qualifications. The selection procedure will consist of the following examination: An Application and Supplemental Questionnaire Appraisal Examination (pass/not pass) will be conducted to evaluate each applicant's combination of educational coursework, training, experience, knowledge, and abilities that relate to this position to ensure satisfaction of the minimum qualifications for this position. Candidates who possess the minimum qualifications for the position will be placed on an extra-help employment list and referred to the department. The department may contact candidates from the employment list who possess the most appropriate job-related qualifications for further consideration. ADDITIONAL INFORMATION A background investigation is required prior to employment. Candidates referred to departments for a selection interview are typically required to sign authorization and release forms enabling such an investigation. Failure to sign prescribed forms will result in the candidate not being considered further for that vacancy. Reference information will not be made available to applicants. Additional requirements, such as successful completion of a physical exam, drug screen, etc., may apply, depending on the duties and responsibilities of the position. If you receive a conditional job offer for the position, the requirements upon which the offer is contingent will be outlined in the conditional job letter. You may also review the Job Classification Screening Schedule to determine the requirements for this position. HOW TO APPLY Applications are accepted online at www.yourpath2sonomacounty.org . Paper applications may be submitted by person, fax (707-565-3770), email, or through the mail. All applications and appropriate supplemental information as outlined in the job bulletin must be RECEIVED by the time and date specified on the first page of this job announcement. Applications received after the recruitment closes will not be accepted. The County of Sonoma values diversity and is dedicated to creating a workplace environment that provides individuals with a sense of belonging. We are committed to having a diverse workforce that is representative of the communities we serve. The County is proud to be an Equal Opportunity Employer where all aspects of employment are based on merit, competence, performance, and business need. HR Analyst: DP HR Technician: EV IMPORTANT NOTE: Benefits described herein do not apply to Extra Help positions. COUNTY OF SONOMA BENEFITS: GENERAL* These are some of the excellent benefits the County offers: Paid Time Off : Competitive vacation and sick leave accruals; 12 paid holidays, and an additional 8 floating holiday hours per year; and may be eligible for up to 8 weeks (320 hours) of Paid Parental Leave after 12 months of County employment. Health Plan : Choice of five health plans (a PPO, EPO, HMO, and two deductible HMOs) with a County contribution toward the premium (the contribution amount varies by bargaining unit. For specific details, please refer to the applicable MOU). A County contribution to a Health Reimbursement Arrangement is available for some bargaining units. Retirement : Fully integrated with Social Security.For more information regarding eligibility, retirement contributions, and reciprocity with prior public service, please visit https://scretire.org/active-/-deferred/when-you-are-hired . IRS 457 Plan : Pre-tax employee contribution up to the IRS annual maximum. Retiree Medical : County contribution to a Health Reimbursement Arrangement to help fund post-retirement employee health insurance/benefits. Plus excellent dental, vision, disability, life insurance, professional development, and more. For answers to specific questions regarding the employment process and more details about benefits or retirement, please contact Human Resources at (707) 565-2331.Additional details about benefit and compensation packages can be found in the MOUs located at https://sonomacounty.ca.gov/administrative-support-and-fiscal-services/human-resources/divisions-and-units/employee-relations/labor-agreements-and-salary-resolution . For specific information about health and welfare benefits including plan options, coverage, and premium amounts go to https://sonomacounty.ca.gov/administrative-support-and-fiscal-services/human-resources or, contact the Human Resources' Risk Management-Benefits Office at benefits@sonoma-county.org or (707) 565-2900. *IMPORTANT NOTES: Benefits described herein do not represent a contract and may be changed without notice. Closing Date/Time: Continuous