HARRY REID INTERNATIONAL AIRPORT
Harry Reid International Airport - Las Vegas, Nevada, United States
ABOUT THE POSITION THE POSTING DATE FOR THIS RECRUITMENT HAS BEEN CHANGED AND IS NOW REFLECTED IN THE JOB ANNOUNCEMENT. The Clark County Department of Aviation is seeking qualified candidates to apply for the Airport ATS Technician I/II position. This position performs journey level work in the installation, maintenance and repair of the highly complex Airport Transit Systems (Trams). Includes system and vehicle recovery (manually operates trains, doors, and power distribution systems), electrical (low voltage up to 600V), mechanical, pneumatic, electro-mechanical functions, CCTV, RF signaling, basic PLC understanding, and basic network understanding - CISCO switches. Airport ATS Technician I: $25.29 - $39.16 Hourly Airport ATS Technician II: $27.29 - $42.28 Hourly The Airport ATS Technician I is a training underfill position, upon successful completion of the training program the successful candidate will be non-competitively promoted to Airport ATS Technician II. This is an open and continuous recruitment, scheduling dates will vary depending on when the application was received and reviewed by Human Resources. Human Resources reserves the right to call only the most qualified applicants to the selection process. MINIMUM REQUIREMENTS Education and Experience: Airport ATS Technician I: Equivalent to graduation from high school and six (6) years of mechanical, electro-mechanical, electronic and pneumatic experience. An apprenticeship in any of these areas will substitute on a year to year basis for experience. Airport ATS Technician II: In addition to the above, two (2) years of maintenance and repair experience, in the area of automated transit systems. Qualifying education and experience must be clearly documented in the “Education” and “Work Experience” sections of the application. Do not substitute a resume for your application or write "see attached resume" on your application. Licensing and Certification: Must possess a valid Class C Nevada driver's license at time of hire. Medical and Drug Examination: Employment is contingent upon the results of a physical examination performed by our examining physician, including pre-employment drug testing. Residency Requirement: Permanent employees must maintain a principal place of residency within the boundaries of Clark County and provide proof of compliance with Nevada motor vehicle registration and drivers' license laws within 90 days of employment. Background Check: Employment with the Department of Aviation is contingent upon completion of an education/experience background investigation, a fingerprint-based criminal history record check processed by the FBI, and upon the ability to be granted a security badge as mandated by the Transportation Security Administration. Note: all prospective hires must present two original government issued ID's upon acceptance of job offer. Examples of acceptable ID's include a Passport, Driver's License or DMV issued ID, birth certificate, Social Security card, Voter Registration card, school issued ID with picture, etc. PHYSICAL DEMANDS Mobility to work in a typical shop , mechanical room, or related maintenance setting, including operating typical trade equipment, hand and power tools and standard office equipment, and to drive a motor vehicle to various work sites; stamina to stand, sit, walk, balance, stoop, kneel, crouch, crawl and climb. Ability to work on ladders, in tunnels, and on elevated guideways exposed to the elements in inclement weather. Ability to work in confined or awkward spaces for an extended period of time; strength to lift and maneuver materials and equipment weighing up to 100 pounds with proper equipment; vision to read printed materials and a computer screen; color vision and depth perception; hearing and speech to communicate in person or over a radio or telephone. Accommodation may be made for some of these physical demands for otherwise qualified individuals who require and request such accommodation. EXAMPLES OF DUTIES Performs skilled and semi-skilled electrical, mechanical, electro-mechanical and pneumatic work in the operation, installation, and maintenance and repair of the airport's automated transit systems. Troubleshoots complex ATS system and subsystem components (tram equipment, vehicle and station doors, power distribution, and computer operating systems), to identify problems or failures and implements repairs. Conducts pre-defined inspections on the ATS system and subsystems at periodic intervals to ensure they operate in accordance with Clark County Issued Ride Certification . Replaces worn or damaged parts, removes and replaces system units and checks system operation when new or repaired units are installed; maintains records of repairs, parts used, calibration data, maintenance performed, and longevity of system assets; performs maintenance and repairs on tires, brakes, motors, switches, relays, air compressors and related system components; may troubleshoot computer boards and electrical breakers; assists service contract personnel in the maintenance of aftermarket programs; may instruct and train maintenance and service personnel in equipment installation, maintenance and repair. Contributes to the efficiency and effectiveness of the unit's service to its customers by offering suggestions and directing or participating as an active member of a work team. Performs other similar and related duties as required. Conducts safety and technical training on ATS related systems and subsystems as assigned; troubleshoots problems and repairs as required. May operate light equipment and drive a truck as assigned. Observes safe work methods and uses safety equipment; attends safety training, technical training and meetings. Utilizes an automated maintenance management system (Maximo) to record and document work performed. Join the Clark County Department of Aviation Family where we offer a comprehensive benefits package that includes: Alternative Work Schedules More Money in Your Pocket 100% Employer Paid Defined Benefit Retirement No Social Security Deduction No State Income Taxes Two Employer Sponsored Health Plans Offered - Choice of PPO or EPO (hybrid of HMO) - eligible first of the month following15 days of employment Medical - Employer pays 90% of premium Pharmacy Benefits (30, 90-day retail or mail order fills) 24/7 Telephone Advice Nurse - no employee cost Teledoc, Doctoroo, and Dispatch Health Retiree insurance - eligible after 5 years of service Dental Vision Life Insurance - Employer Paid AD&D - Employer Paid Long Term Disability - Employer Paid Generous Leave Accruals that include: 12 Paid Holidays plus a Floating Birthday Holiday Paid Vacation Leave Paid Sick Leave Holiday Leave Other leave options Catastrophic Leave Parental Leave - Up to 90 days Wide Variety of Voluntary Benefits that include Guardian - Accident, Cancer, Critical Illness, Hospital Indemnity, and Short-Term Disability Insurance. Trustmark - Permanent Life Insurance benefits and long-term care. Sunlife Financial - Basic and Voluntary Life Insurance, AD&D, and long-term disability insurance TASC - Flexible Spending Account - FSA & Dependent Day Care Debit Card Available Morgan Stanley - Deferred Compensation Plan Employee Assistance Program Onsite Fitness Center The Department of Aviation, a department of Clark County, is an affirmative action/equal opportunity employer Community Volunteer Opportunities Comprehensive training program Wellness program Closing Date/Time: Continuous
ABOUT THE POSITION THE POSTING DATE FOR THIS RECRUITMENT HAS BEEN CHANGED AND IS NOW REFLECTED IN THE JOB ANNOUNCEMENT. The Clark County Department of Aviation is seeking qualified candidates to apply for the Airport ATS Technician I/II position. This position performs journey level work in the installation, maintenance and repair of the highly complex Airport Transit Systems (Trams). Includes system and vehicle recovery (manually operates trains, doors, and power distribution systems), electrical (low voltage up to 600V), mechanical, pneumatic, electro-mechanical functions, CCTV, RF signaling, basic PLC understanding, and basic network understanding - CISCO switches. Airport ATS Technician I: $25.29 - $39.16 Hourly Airport ATS Technician II: $27.29 - $42.28 Hourly The Airport ATS Technician I is a training underfill position, upon successful completion of the training program the successful candidate will be non-competitively promoted to Airport ATS Technician II. This is an open and continuous recruitment, scheduling dates will vary depending on when the application was received and reviewed by Human Resources. Human Resources reserves the right to call only the most qualified applicants to the selection process. MINIMUM REQUIREMENTS Education and Experience: Airport ATS Technician I: Equivalent to graduation from high school and six (6) years of mechanical, electro-mechanical, electronic and pneumatic experience. An apprenticeship in any of these areas will substitute on a year to year basis for experience. Airport ATS Technician II: In addition to the above, two (2) years of maintenance and repair experience, in the area of automated transit systems. Qualifying education and experience must be clearly documented in the “Education” and “Work Experience” sections of the application. Do not substitute a resume for your application or write "see attached resume" on your application. Licensing and Certification: Must possess a valid Class C Nevada driver's license at time of hire. Medical and Drug Examination: Employment is contingent upon the results of a physical examination performed by our examining physician, including pre-employment drug testing. Residency Requirement: Permanent employees must maintain a principal place of residency within the boundaries of Clark County and provide proof of compliance with Nevada motor vehicle registration and drivers' license laws within 90 days of employment. Background Check: Employment with the Department of Aviation is contingent upon completion of an education/experience background investigation, a fingerprint-based criminal history record check processed by the FBI, and upon the ability to be granted a security badge as mandated by the Transportation Security Administration. Note: all prospective hires must present two original government issued ID's upon acceptance of job offer. Examples of acceptable ID's include a Passport, Driver's License or DMV issued ID, birth certificate, Social Security card, Voter Registration card, school issued ID with picture, etc. PHYSICAL DEMANDS Mobility to work in a typical shop , mechanical room, or related maintenance setting, including operating typical trade equipment, hand and power tools and standard office equipment, and to drive a motor vehicle to various work sites; stamina to stand, sit, walk, balance, stoop, kneel, crouch, crawl and climb. Ability to work on ladders, in tunnels, and on elevated guideways exposed to the elements in inclement weather. Ability to work in confined or awkward spaces for an extended period of time; strength to lift and maneuver materials and equipment weighing up to 100 pounds with proper equipment; vision to read printed materials and a computer screen; color vision and depth perception; hearing and speech to communicate in person or over a radio or telephone. Accommodation may be made for some of these physical demands for otherwise qualified individuals who require and request such accommodation. EXAMPLES OF DUTIES Performs skilled and semi-skilled electrical, mechanical, electro-mechanical and pneumatic work in the operation, installation, and maintenance and repair of the airport's automated transit systems. Troubleshoots complex ATS system and subsystem components (tram equipment, vehicle and station doors, power distribution, and computer operating systems), to identify problems or failures and implements repairs. Conducts pre-defined inspections on the ATS system and subsystems at periodic intervals to ensure they operate in accordance with Clark County Issued Ride Certification . Replaces worn or damaged parts, removes and replaces system units and checks system operation when new or repaired units are installed; maintains records of repairs, parts used, calibration data, maintenance performed, and longevity of system assets; performs maintenance and repairs on tires, brakes, motors, switches, relays, air compressors and related system components; may troubleshoot computer boards and electrical breakers; assists service contract personnel in the maintenance of aftermarket programs; may instruct and train maintenance and service personnel in equipment installation, maintenance and repair. Contributes to the efficiency and effectiveness of the unit's service to its customers by offering suggestions and directing or participating as an active member of a work team. Performs other similar and related duties as required. Conducts safety and technical training on ATS related systems and subsystems as assigned; troubleshoots problems and repairs as required. May operate light equipment and drive a truck as assigned. Observes safe work methods and uses safety equipment; attends safety training, technical training and meetings. Utilizes an automated maintenance management system (Maximo) to record and document work performed. Join the Clark County Department of Aviation Family where we offer a comprehensive benefits package that includes: Alternative Work Schedules More Money in Your Pocket 100% Employer Paid Defined Benefit Retirement No Social Security Deduction No State Income Taxes Two Employer Sponsored Health Plans Offered - Choice of PPO or EPO (hybrid of HMO) - eligible first of the month following15 days of employment Medical - Employer pays 90% of premium Pharmacy Benefits (30, 90-day retail or mail order fills) 24/7 Telephone Advice Nurse - no employee cost Teledoc, Doctoroo, and Dispatch Health Retiree insurance - eligible after 5 years of service Dental Vision Life Insurance - Employer Paid AD&D - Employer Paid Long Term Disability - Employer Paid Generous Leave Accruals that include: 12 Paid Holidays plus a Floating Birthday Holiday Paid Vacation Leave Paid Sick Leave Holiday Leave Other leave options Catastrophic Leave Parental Leave - Up to 90 days Wide Variety of Voluntary Benefits that include Guardian - Accident, Cancer, Critical Illness, Hospital Indemnity, and Short-Term Disability Insurance. Trustmark - Permanent Life Insurance benefits and long-term care. Sunlife Financial - Basic and Voluntary Life Insurance, AD&D, and long-term disability insurance TASC - Flexible Spending Account - FSA & Dependent Day Care Debit Card Available Morgan Stanley - Deferred Compensation Plan Employee Assistance Program Onsite Fitness Center The Department of Aviation, a department of Clark County, is an affirmative action/equal opportunity employer Community Volunteer Opportunities Comprehensive training program Wellness program Closing Date/Time: Continuous
Cal State University (CSU) Monterey Bay
100 Campus Center, Seaside, CA 93955, USA
Classification: Instructional Support Technician II - 11/12 - Non-exempt Hours: Full-time / 40 hours per week FLSA: Non-exempt Anticipated Hiring Salary Range: $4,114 to $4,644* mo. CSU Salary Schedule *CSUMB provides pay scales representing its good faith estimate of what the university reasonably expects to pay for this position. The pay offered to a selected candidate will be determined on factors such as (but not limited to) the scope and responsibilities of the position, the qualifications of the selected candidate, departmental budget availability, internal equity, and CSU systemwide pay for comparable jobs. This is an 11-month position with the month of July off. Scheduling options include 11 months of work paid over a 12 month period. Priority Screening Date: February 26, 2024 Recruitment Status: Extended ABOUT CSUMB California State University, Monterey Bay is a mid-sized university in California’s Central Coast that grants undergraduate and graduate degrees. Powered by an inspiring Founding Vision Statement , CSUMB is part of the nation’s largest four-year public university system, California State University , which educates nearly 460,000 students every year. With a vibrant, diverse student body of over 7,000 students, CSU Monterey Bay is both a Minority Serving Institution and a Hispanic Serving Institution. Our staff and faculty transform students’ lives with a focus on student success and engagement through experiential learning, service learning, and a strong emphasis on multicultural and global perspectives. CSUMB’s sustainability goal is to be carbon neutral by 2030. The university’s Strategic Plan prioritizes inclusive excellence through recruiting and investing in developing a diverse body of faculty, staff and administrators. Many appreciate living and working close to the shores of beautiful Monterey Bay, with easy access to recreational areas from Big Sur to Santa Cruz. Nearby opportunities for collaborative research include working in the Monterey Bay National Marine Sanctuary and Silicon Valley, and with colleagues at local research universities, including UC Santa Cruz and Stanford University. As one of the 23 campuses in the CSU system, CSUMB offers excellent benefits, including access to below-market-rate rental housing on East Campus, and competitive salaries for faculty and staff. With proximity to the San Francisco Bay Area and San Jose, opportunities for faculty, staff and students are as endless as the shores of the nearby Pacific Ocean. PURPOSE : Under the general supervision of the Dean of the College of Science and the work direction of the Chair of the Department of Mechatronics Engineering, the Laboratory Support Technician shall provide comprehensive services in support of laboratory courses within the Department of Mechatronics Engineering. ESSENTIAL DUTIES AND RESPONSIBILITIES include, but are not limited to, the following : Prepare, set-up, and clean up materials for labs courses that include engineering and physics, and/or other related fields as needed. Document lab set-ups and organize materials for future labs. Work with faculty and staff to plan, coordinate, and troubleshoot lab activities. Proactively plan ahead to meet multiple deadlines and priorities. Accurately maintain existing inventories of lab materials, supplies, equipment, and chemicals. Organize materials and lab spaces in collaboration with other lab staff. Provide specifications for ordering laboratory materials, reagents, and lab and field equipment. Assist in scheduling and checkout of shared resources among multiple users. Troubleshoot, maintain, and perform minor repairs on specialized lab and field instrumentation, including computer interfaces for data collection. May interact with repair technicians from outside the department. Responsible for the purchase, installation, and maintenance of engineering laboratories Develop familiarity with safety aspects of all materials, equipment, and procedures used in engineering and science labs. Organize and update safety information for access by students, instructors, and staff. Prepare biological and chemical hazards for disposal as needed, acting in compliance with relevant regulations and guidelines. Share safety information with staff, faculty, and students. Design, fabrication and construction for unique, highly technical and prototype equipment or systems Provide training as necessary for faculty, staff, and students in the use of specialized instrumentation and protocols. Train student workers in safety aspects of specialized procedures. Develop protocols for equipment use. Train students in fabrication equipment such as 3D printers, CNC, lathes, among others. Other Functions : Performs other job-related duties and special projects as assigned. KNOWLEDGE, SKILLS AND ABILITIES : Knowledge of the principles of performing support services; knowledge of the principles, methods, and techniques related to the discipline and the curriculum; knowledge of the materials and supplies in the curriculum and the curriculum and their uses. Ability to: plan, organize, and schedule activities; ability to operate technical equipment related to the discipline; ability to maintain records; ability to adjust and perform simple maintenance of technical and scientific equipment. MINIMUM QUALIFICATIONS : Equivalent to three years of experience providing instructional support services for a related unit or discipline, or in producing materials or supplies or repairing equipment in a discipline related to the area to which assigned. OR the equivalent to two years of college with 16 semester units in courses involving extensive use of materials, supplies, or equipment and in a discipline related to the area may be substituted for one year of the required experience; OR the equivalent to four years of college with 16 semester units in courses involving extensive use of materials, supplies, or equipment and in a discipline related to the area to which assigned may be substituted for two years of the required experience. SPECIALIZED SKILLS : Ability to: adjust, trouble-shoot, and perform simple maintenance of scientific and engineering instrumentation; pay attention to detail and follow verbal and written instructions; work both independently and interdependently in a rapidly evolving setting; read and write at a level appropriate to the duties of the position; communicate verbally and in writing in a cooperative, professional, and tactful manner within a diverse team of students, faculty, and support staff. Use electronic and electrical test equipment, such as multimeters, oscilloscopes, and function generators. Skilled troubleshooting, repair, maintenance, calibration, and assembly of mechanical, pneumatic, hydraulic, and electro, mechanical instructional support equipment. Use fabrication equipment, such as CNC router, lathe, laser cutters, 3D printers, and welding. PREFERRED QUALIFICATIONS : Bachelor's degree or equivalent in Engineering, Engineering Technology, Industrial Automation, or related discipline with coursework in engineering, manufacturing, or closely related discipline with at least two (2) years of experience as a technician where duties included direct responsibility for preparing labs for college courses in engineering or closely related discipline. Experience operating, maintaining, and troubleshooting engineering equipment and lab instrumentation used in college-level courses. Experience handling chemicals and hazardous waste safely; specifying scientific supplies and equipment for procurement; and with the safe operation of hand and power tools. Experience with electronic equipment, pneumatics, machining tools, lathes, welding, CNC routers, mills, among other equipment. RSS or equivalent chemical inventory database and experience with tracking scientific supplies and equipment. Technical fluency in the use of Microsoft Office Professional, including with Excel and Access, or similar programs; Google Workspace (Gmail, Docs, Sheets, Drive, Calendar, Forms, etc.); CAD software, Oracle-PeopleSoft/Common Management System or equivalent student, HR and Financial information systems; intranet drives; and internet browsers. SPECIAL CONDITIONS OF EMPLOYMENT & POSITION DESIGNATIONS : All offers of employment are contingent upon the successful completion of a background check (including a criminal records check). The person holding this position is considered a “mandated reporter” under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. This position will have a duty to report to the Campus Title IX Officer information pertaining to victims of sex discrimination, sexual harassment, sexual misconduct, dating/domestic violence, and stalking as required by CSU Executive Order 1095 . This position has been designated as a sensitive position with: responsibility for the care, safety and security of people (including children and minors), animals and CSU property; access to controlled or hazardous substances; access to and responsibility for detailed personally identifiable Level 1 confidential information about students, faculty, staff or alumni that is protected, personal or sensitive as defined in the CSU Information Security Data Classification Standards ; and responsibility for operating commercial vehicles, machinery or equipment that could pose environmental hazards or cause injury, illness, or death. This position is required to comply with confidentiality requirements outlined in the Department of Education’s Family Educational Rights and Privacy and California’s Educational Code Chapter 13 regarding sensitive student issues. Must possess and maintain a valid license to drive in the State of California, pass the Defensive Training Class, and be insurable under the University's liability coverage. May require occasional evenings and/or weekend work. PHYSICAL ENVIRONMENT : Position requires frequent movement; bending; climbing; reaching; standing; lifting objects up to 40 pounds; and applying force. Office environment with standard equipment and tasks. Position requires working at a computer and desk for extended periods of time. Requires travel between campus offices and off-campus locations. This position requires, but is not limited to, performing work indoors and outdoors in a variety of local weather conditions and environments. Must participate in all OSHA and University safety programs, as required, and follow all work safety guidelines. Involves working with chemicals; compressed gases; biological materials; glass and other sharps. Work involves use and maintenance of scientific equipment, risk of being exposed to fire, fumes, chemical and biological hazards, and electrical shock. The health and safety of our students, faculty, and staff remain our highest priority. While on campus, students, faculty, staff, and the community will be expected to follow all campus safety mandates. BENEFITS/PERKS : CSUMB offers a premium benefit package that includes outstanding vacation, health, dental and vision plans; membership in the California Public Employees Retirement System (CalPERS); and 15 paid holidays a year. For more information, visit Employee Benefits Summary . As a perk, the University Corporation at CSU Monterey Bay provides access to affordable campus housing based on availability; visit Schoonover Employee Housing for more information. APPLICATION PROCEDURE : For full consideration, applicants must complete the required online application prior to the priority screen date found at Careers at CSUMB . Application submissions received after the application screening date will be reviewed at the discretion of the University. Materials submitted become the property of CSUMB and will not be returned. CSUMB is not a sponsoring agency for staff or management positions. Reasonable accommodations will be provided for qualified applicants with disabilities who self-disclose by contacting Human Resources at (831) 582-3389 or emailing humanresources@csumb.edu . All employees must be eligible for employment in the U.S. GENERAL INFORMATION : CSUMB hires only individuals lawfully authorized to work in the United States and is an E-Verify employer. In compliance with federal crime awareness and campus security legislation, including the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics, you can view the notice of availability and access the Cal State University, Monterey Bay annual security and fire safety reports at https://csumb.edu/clery/asr-and-fsr-notices-availability/ . CSUMB is a smoke and tobacco-free campus. EQUAL OPPORTUNITY EMPLOYER : CSUMB is an Equal Opportunity employer seeking to recruit and support a broadly diverse community of faculty and staff. We value and celebrate diversity in all its forms and strive to foster an inclusive culture built on respect that affirms inter-group relations and builds cohesion. We consider qualified applicants for employment for their anticipated contributions and without regard to race, color, religion, national origin, age, gender, gender identity or expression, sexual orientation, genetic information, medical condition, pregnancy, marital status, veteran status, or disability. Advertised: Jan 22 2024 Pacific Standard Time Applications close: Closing Date/Time:
Classification: Instructional Support Technician II - 11/12 - Non-exempt Hours: Full-time / 40 hours per week FLSA: Non-exempt Anticipated Hiring Salary Range: $4,114 to $4,644* mo. CSU Salary Schedule *CSUMB provides pay scales representing its good faith estimate of what the university reasonably expects to pay for this position. The pay offered to a selected candidate will be determined on factors such as (but not limited to) the scope and responsibilities of the position, the qualifications of the selected candidate, departmental budget availability, internal equity, and CSU systemwide pay for comparable jobs. This is an 11-month position with the month of July off. Scheduling options include 11 months of work paid over a 12 month period. Priority Screening Date: February 26, 2024 Recruitment Status: Extended ABOUT CSUMB California State University, Monterey Bay is a mid-sized university in California’s Central Coast that grants undergraduate and graduate degrees. Powered by an inspiring Founding Vision Statement , CSUMB is part of the nation’s largest four-year public university system, California State University , which educates nearly 460,000 students every year. With a vibrant, diverse student body of over 7,000 students, CSU Monterey Bay is both a Minority Serving Institution and a Hispanic Serving Institution. Our staff and faculty transform students’ lives with a focus on student success and engagement through experiential learning, service learning, and a strong emphasis on multicultural and global perspectives. CSUMB’s sustainability goal is to be carbon neutral by 2030. The university’s Strategic Plan prioritizes inclusive excellence through recruiting and investing in developing a diverse body of faculty, staff and administrators. Many appreciate living and working close to the shores of beautiful Monterey Bay, with easy access to recreational areas from Big Sur to Santa Cruz. Nearby opportunities for collaborative research include working in the Monterey Bay National Marine Sanctuary and Silicon Valley, and with colleagues at local research universities, including UC Santa Cruz and Stanford University. As one of the 23 campuses in the CSU system, CSUMB offers excellent benefits, including access to below-market-rate rental housing on East Campus, and competitive salaries for faculty and staff. With proximity to the San Francisco Bay Area and San Jose, opportunities for faculty, staff and students are as endless as the shores of the nearby Pacific Ocean. PURPOSE : Under the general supervision of the Dean of the College of Science and the work direction of the Chair of the Department of Mechatronics Engineering, the Laboratory Support Technician shall provide comprehensive services in support of laboratory courses within the Department of Mechatronics Engineering. ESSENTIAL DUTIES AND RESPONSIBILITIES include, but are not limited to, the following : Prepare, set-up, and clean up materials for labs courses that include engineering and physics, and/or other related fields as needed. Document lab set-ups and organize materials for future labs. Work with faculty and staff to plan, coordinate, and troubleshoot lab activities. Proactively plan ahead to meet multiple deadlines and priorities. Accurately maintain existing inventories of lab materials, supplies, equipment, and chemicals. Organize materials and lab spaces in collaboration with other lab staff. Provide specifications for ordering laboratory materials, reagents, and lab and field equipment. Assist in scheduling and checkout of shared resources among multiple users. Troubleshoot, maintain, and perform minor repairs on specialized lab and field instrumentation, including computer interfaces for data collection. May interact with repair technicians from outside the department. Responsible for the purchase, installation, and maintenance of engineering laboratories Develop familiarity with safety aspects of all materials, equipment, and procedures used in engineering and science labs. Organize and update safety information for access by students, instructors, and staff. Prepare biological and chemical hazards for disposal as needed, acting in compliance with relevant regulations and guidelines. Share safety information with staff, faculty, and students. Design, fabrication and construction for unique, highly technical and prototype equipment or systems Provide training as necessary for faculty, staff, and students in the use of specialized instrumentation and protocols. Train student workers in safety aspects of specialized procedures. Develop protocols for equipment use. Train students in fabrication equipment such as 3D printers, CNC, lathes, among others. Other Functions : Performs other job-related duties and special projects as assigned. KNOWLEDGE, SKILLS AND ABILITIES : Knowledge of the principles of performing support services; knowledge of the principles, methods, and techniques related to the discipline and the curriculum; knowledge of the materials and supplies in the curriculum and the curriculum and their uses. Ability to: plan, organize, and schedule activities; ability to operate technical equipment related to the discipline; ability to maintain records; ability to adjust and perform simple maintenance of technical and scientific equipment. MINIMUM QUALIFICATIONS : Equivalent to three years of experience providing instructional support services for a related unit or discipline, or in producing materials or supplies or repairing equipment in a discipline related to the area to which assigned. OR the equivalent to two years of college with 16 semester units in courses involving extensive use of materials, supplies, or equipment and in a discipline related to the area may be substituted for one year of the required experience; OR the equivalent to four years of college with 16 semester units in courses involving extensive use of materials, supplies, or equipment and in a discipline related to the area to which assigned may be substituted for two years of the required experience. SPECIALIZED SKILLS : Ability to: adjust, trouble-shoot, and perform simple maintenance of scientific and engineering instrumentation; pay attention to detail and follow verbal and written instructions; work both independently and interdependently in a rapidly evolving setting; read and write at a level appropriate to the duties of the position; communicate verbally and in writing in a cooperative, professional, and tactful manner within a diverse team of students, faculty, and support staff. Use electronic and electrical test equipment, such as multimeters, oscilloscopes, and function generators. Skilled troubleshooting, repair, maintenance, calibration, and assembly of mechanical, pneumatic, hydraulic, and electro, mechanical instructional support equipment. Use fabrication equipment, such as CNC router, lathe, laser cutters, 3D printers, and welding. PREFERRED QUALIFICATIONS : Bachelor's degree or equivalent in Engineering, Engineering Technology, Industrial Automation, or related discipline with coursework in engineering, manufacturing, or closely related discipline with at least two (2) years of experience as a technician where duties included direct responsibility for preparing labs for college courses in engineering or closely related discipline. Experience operating, maintaining, and troubleshooting engineering equipment and lab instrumentation used in college-level courses. Experience handling chemicals and hazardous waste safely; specifying scientific supplies and equipment for procurement; and with the safe operation of hand and power tools. Experience with electronic equipment, pneumatics, machining tools, lathes, welding, CNC routers, mills, among other equipment. RSS or equivalent chemical inventory database and experience with tracking scientific supplies and equipment. Technical fluency in the use of Microsoft Office Professional, including with Excel and Access, or similar programs; Google Workspace (Gmail, Docs, Sheets, Drive, Calendar, Forms, etc.); CAD software, Oracle-PeopleSoft/Common Management System or equivalent student, HR and Financial information systems; intranet drives; and internet browsers. SPECIAL CONDITIONS OF EMPLOYMENT & POSITION DESIGNATIONS : All offers of employment are contingent upon the successful completion of a background check (including a criminal records check). The person holding this position is considered a “mandated reporter” under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. This position will have a duty to report to the Campus Title IX Officer information pertaining to victims of sex discrimination, sexual harassment, sexual misconduct, dating/domestic violence, and stalking as required by CSU Executive Order 1095 . This position has been designated as a sensitive position with: responsibility for the care, safety and security of people (including children and minors), animals and CSU property; access to controlled or hazardous substances; access to and responsibility for detailed personally identifiable Level 1 confidential information about students, faculty, staff or alumni that is protected, personal or sensitive as defined in the CSU Information Security Data Classification Standards ; and responsibility for operating commercial vehicles, machinery or equipment that could pose environmental hazards or cause injury, illness, or death. This position is required to comply with confidentiality requirements outlined in the Department of Education’s Family Educational Rights and Privacy and California’s Educational Code Chapter 13 regarding sensitive student issues. Must possess and maintain a valid license to drive in the State of California, pass the Defensive Training Class, and be insurable under the University's liability coverage. May require occasional evenings and/or weekend work. PHYSICAL ENVIRONMENT : Position requires frequent movement; bending; climbing; reaching; standing; lifting objects up to 40 pounds; and applying force. Office environment with standard equipment and tasks. Position requires working at a computer and desk for extended periods of time. Requires travel between campus offices and off-campus locations. This position requires, but is not limited to, performing work indoors and outdoors in a variety of local weather conditions and environments. Must participate in all OSHA and University safety programs, as required, and follow all work safety guidelines. Involves working with chemicals; compressed gases; biological materials; glass and other sharps. Work involves use and maintenance of scientific equipment, risk of being exposed to fire, fumes, chemical and biological hazards, and electrical shock. The health and safety of our students, faculty, and staff remain our highest priority. While on campus, students, faculty, staff, and the community will be expected to follow all campus safety mandates. BENEFITS/PERKS : CSUMB offers a premium benefit package that includes outstanding vacation, health, dental and vision plans; membership in the California Public Employees Retirement System (CalPERS); and 15 paid holidays a year. For more information, visit Employee Benefits Summary . As a perk, the University Corporation at CSU Monterey Bay provides access to affordable campus housing based on availability; visit Schoonover Employee Housing for more information. APPLICATION PROCEDURE : For full consideration, applicants must complete the required online application prior to the priority screen date found at Careers at CSUMB . Application submissions received after the application screening date will be reviewed at the discretion of the University. Materials submitted become the property of CSUMB and will not be returned. CSUMB is not a sponsoring agency for staff or management positions. Reasonable accommodations will be provided for qualified applicants with disabilities who self-disclose by contacting Human Resources at (831) 582-3389 or emailing humanresources@csumb.edu . All employees must be eligible for employment in the U.S. GENERAL INFORMATION : CSUMB hires only individuals lawfully authorized to work in the United States and is an E-Verify employer. In compliance with federal crime awareness and campus security legislation, including the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics, you can view the notice of availability and access the Cal State University, Monterey Bay annual security and fire safety reports at https://csumb.edu/clery/asr-and-fsr-notices-availability/ . CSUMB is a smoke and tobacco-free campus. EQUAL OPPORTUNITY EMPLOYER : CSUMB is an Equal Opportunity employer seeking to recruit and support a broadly diverse community of faculty and staff. We value and celebrate diversity in all its forms and strive to foster an inclusive culture built on respect that affirms inter-group relations and builds cohesion. We consider qualified applicants for employment for their anticipated contributions and without regard to race, color, religion, national origin, age, gender, gender identity or expression, sexual orientation, genetic information, medical condition, pregnancy, marital status, veteran status, or disability. Advertised: Jan 22 2024 Pacific Standard Time Applications close: Closing Date/Time:
Cal State University (CSU) LA
5151 State University Drive, Los Angeles, CA 90032, USA
Job No: 528131; 6/9/2023 MAKERSPACE PROJECT COORDINATOR Equipment Technician II, Electro-Mechanical College of Engineering Computer Science and Technology, Dean’s Office Salary Range : $4211 - $7617/Monthly Work Schedule : Full-Time, Monday-Friday 8:00 a.m. to 5:00 p.m.; non-exempt classification. Essential Functions : Under the general supervision of ECST (Engineering, Computer Science, and Technology) Associate Dean who oversees Technical Operations in the College, the incumbent will primarily assist students, staff, and faculty be successful in undertaking the design process. This includes the generation of project requirements, ideation, concept selection, engineering analysis, prototyping, material selection and procurement, manufacturing, fabrication, and assembly of designs. The incumbent will also assist in the operation of the ECST Labs and ECST Makerspace, assist in maintaining the equipment in the Makerspace, assist in supervising the use of equipment and tools, and provide assistance to faculty or lab coordinators to develop institutional/training materials on the safe use of materials, supplies, and equipment. Incumbent will assist in the supervision of the student shop stewards. Work at this level requires independent knowledge of design principles and extensive practical experience. Required Qualifications & Experience : Equivalent to two years of journey-level or skilled experience in the maintenance, repair, and operation of scientific or technical equipment in the specialty area to which assigned such as mechanical, electromechanical, electronics or in the specialized category including construction and fabrication and some precision work or requiring trade or craft skills working with a variety of unique materials. Two years of semi-skilled experience maintaining and repairing scientific or technical equipment or related experience in the type of equipment to which assigned as part of instructional support activities may be substituted for one year of the required experience. Two years of trade school or technical arts training with specialization in the type of equipment repair to which assigned, completion of an apprenticeship program, or completion of a full military specialization in the required type of equipment maintenance and repair for one year of the required experience. Work at this level requires independent knowledge of design principles and extensive practical experience. Comprehensive knowledge of the methods, materials, tools and equipment used in the area of electro-mechanical labs and shops; and knowledge of design and safety protocols. Ability to: train and supervise students; plan, organize, and coordinate the work of technical projects; design, fabricate, and assemble devices and systems; install, replace, repair, and maintain a wide variety of equipment for the Makerspace, shops, and electro-mechanical labs; establish and maintain cooperative relationships; use modern productivity software; and train and supervise students. The incumbent must have a demonstrated interest and/or ability in working in a multicultural/multiethnic environment. A background check (including a criminal records check) must be completed satisfactorily before any candidate can be offered a position with the CSU. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current CSU employees who may apply for the position. California State University, Los Angeles, as part of the CSU system, is a State of California Employer. As such, the University requires all employees upon date of hire to reside in the State of California. As of January 1, 2022 the CSU Out-of-State Employment Policy prohibits the hiring of employees to perform CSU-related work outside the state of California. Desired Qualifications : Experience working with students and project teams. Experience working in a Makerspace or equivalent. Closing Date : Review of applications will continue until the position is filled; however, the position may close when an adequate number of qualified applications are received. A COMPLETED ON-LINE CAL STATE LA EMPLOYMENT APPLICATION IS REQUIRED. RESUMES WILL NOT BE ACCEPTED IN LIEU OF A COMPLETED APPLICATION. The person holding this position is considered a "mandated reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 revised July 21, 2017, as a condition of employment. In addition to meeting fully its obligations under federal and state law, California State University, Los Angeles is committed to creating a community in which a diverse population can live and work in an atmosphere of tolerance, civility and respect for the rights and sensibilities of each individual. To that end, all qualified individuals will receive equal consideration without regard to economic status, race, ethnicity, color, religion, disability, national origin or cultural background, political views, sex or sexual orientation, gender, or other personal characteristics or beliefs. Candidates must demonstrate ability and/or interest in working in a multicultural/multiethnic environment. Certain positions require fingerprinting. The University actively encourages qualified minorities, women and persons with a disability to apply. Upon request, reasonable accommodation will be provided to individuals with protected disabilities to (a) complete the employment process and (b) perform essential job functions when this does not cause an undue hardship. We are an Equal Opportunity/Title IX Employer. To obtain employment information for the impaired call: TDD Line (323) 343-3670 24-hour Dial-A-Job Line (323) 343-3678 Advertised: Jun 09 2023 Pacific Daylight Time Applications close: Closing Date/Time:
Job No: 528131; 6/9/2023 MAKERSPACE PROJECT COORDINATOR Equipment Technician II, Electro-Mechanical College of Engineering Computer Science and Technology, Dean’s Office Salary Range : $4211 - $7617/Monthly Work Schedule : Full-Time, Monday-Friday 8:00 a.m. to 5:00 p.m.; non-exempt classification. Essential Functions : Under the general supervision of ECST (Engineering, Computer Science, and Technology) Associate Dean who oversees Technical Operations in the College, the incumbent will primarily assist students, staff, and faculty be successful in undertaking the design process. This includes the generation of project requirements, ideation, concept selection, engineering analysis, prototyping, material selection and procurement, manufacturing, fabrication, and assembly of designs. The incumbent will also assist in the operation of the ECST Labs and ECST Makerspace, assist in maintaining the equipment in the Makerspace, assist in supervising the use of equipment and tools, and provide assistance to faculty or lab coordinators to develop institutional/training materials on the safe use of materials, supplies, and equipment. Incumbent will assist in the supervision of the student shop stewards. Work at this level requires independent knowledge of design principles and extensive practical experience. Required Qualifications & Experience : Equivalent to two years of journey-level or skilled experience in the maintenance, repair, and operation of scientific or technical equipment in the specialty area to which assigned such as mechanical, electromechanical, electronics or in the specialized category including construction and fabrication and some precision work or requiring trade or craft skills working with a variety of unique materials. Two years of semi-skilled experience maintaining and repairing scientific or technical equipment or related experience in the type of equipment to which assigned as part of instructional support activities may be substituted for one year of the required experience. Two years of trade school or technical arts training with specialization in the type of equipment repair to which assigned, completion of an apprenticeship program, or completion of a full military specialization in the required type of equipment maintenance and repair for one year of the required experience. Work at this level requires independent knowledge of design principles and extensive practical experience. Comprehensive knowledge of the methods, materials, tools and equipment used in the area of electro-mechanical labs and shops; and knowledge of design and safety protocols. Ability to: train and supervise students; plan, organize, and coordinate the work of technical projects; design, fabricate, and assemble devices and systems; install, replace, repair, and maintain a wide variety of equipment for the Makerspace, shops, and electro-mechanical labs; establish and maintain cooperative relationships; use modern productivity software; and train and supervise students. The incumbent must have a demonstrated interest and/or ability in working in a multicultural/multiethnic environment. A background check (including a criminal records check) must be completed satisfactorily before any candidate can be offered a position with the CSU. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current CSU employees who may apply for the position. California State University, Los Angeles, as part of the CSU system, is a State of California Employer. As such, the University requires all employees upon date of hire to reside in the State of California. As of January 1, 2022 the CSU Out-of-State Employment Policy prohibits the hiring of employees to perform CSU-related work outside the state of California. Desired Qualifications : Experience working with students and project teams. Experience working in a Makerspace or equivalent. Closing Date : Review of applications will continue until the position is filled; however, the position may close when an adequate number of qualified applications are received. A COMPLETED ON-LINE CAL STATE LA EMPLOYMENT APPLICATION IS REQUIRED. RESUMES WILL NOT BE ACCEPTED IN LIEU OF A COMPLETED APPLICATION. The person holding this position is considered a "mandated reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 revised July 21, 2017, as a condition of employment. In addition to meeting fully its obligations under federal and state law, California State University, Los Angeles is committed to creating a community in which a diverse population can live and work in an atmosphere of tolerance, civility and respect for the rights and sensibilities of each individual. To that end, all qualified individuals will receive equal consideration without regard to economic status, race, ethnicity, color, religion, disability, national origin or cultural background, political views, sex or sexual orientation, gender, or other personal characteristics or beliefs. Candidates must demonstrate ability and/or interest in working in a multicultural/multiethnic environment. Certain positions require fingerprinting. The University actively encourages qualified minorities, women and persons with a disability to apply. Upon request, reasonable accommodation will be provided to individuals with protected disabilities to (a) complete the employment process and (b) perform essential job functions when this does not cause an undue hardship. We are an Equal Opportunity/Title IX Employer. To obtain employment information for the impaired call: TDD Line (323) 343-3670 24-hour Dial-A-Job Line (323) 343-3678 Advertised: Jun 09 2023 Pacific Daylight Time Applications close: Closing Date/Time: